Skip to contentSkip to conversation

8250_pnp is confused... (udev?)

DISCUSSION Jeff Wiegley 2 participants 2 messages May 22, 2007

lore
Share & tools
lore
#0 lore raw

I've used serial ports a lot in the past but not for the past year so. Did something fundamental change?

I have serial_core, 8250 and 8250_pnp modules installed and things are quite weird... I get all of the /dev/ttyS's that I DON'T have and none of the ones that I do!

$modprobe -a 8250_pnp
$tail /var/log/message

May 21 22:59:35 home Serial: 8250/16550 driver $Revision: 1.90 $ 4
ports, IRQ sharing disabled
May 21 22:59:35 home pnp: Device 00:07 activated.
May 21 22:59:35 home 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A

So, yes it looks like it sees the one serial port that I also think I have. but...

$ls -al /dev/ttyS*
crw-rw---- 1 root uucp 4, 65 May 21 22:59 /dev/ttyS1 crw-rw---- 1 root uucp 4, 66 May 21 22:59 /dev/ttyS2 crw-rw---- 1 root uucp 4, 67 May 21 22:59 /dev/ttyS3

It seems that somehow either 8250_pnp (or maybe udev) gets the logic inverted. It doesn't create a device for the one device that 8250_pnp found and yet it does create devices for everything NOT found??

If I rmmod 8250_pnp 8250 serial_core then all the serial devices go away. So it's 8250/udev creating these oddities and not me.

I am using gentoo with kernel v2.6.21.1 on an intel 64 bit dual-core with Nvidia 580i chipset. I haven't tweaked any udev rules. udev is version 104-r12.

Any help is appreciated. Thanks!

- Jeff

#1 lore raw

Am 2007-05-21 23:05 -0700 schrieb Jeff Wiegley:

Quoted 2 lines

I've used serial ports a lot in the past but not for the past year so. Did something fundamental change?

I use a serial PCI adaptor:

00:0b.0 Serial controller: NetMos Technology PCI 9835 Multi-I/O Controller (rev 01)

Well, I have also not used ttyS2 for a while and recently I realized, it does not like, when I past with a mouse a line into any terminal with a line break (Input Output Error). ttyS1 (same card) works fine.

Quoted 2 lines

and things are quite weird... I get all of the /dev/ttyS's that I DON'T have and none of the ones that I do!

When I have 8250* build as modules I get:

ttyS0: OnBoard
ttyS1: PCI card, first Port
ttyS3: bogus, could have been meant to become ttyS2, second Port.

So there is weird stuff going on since recent Kernel versions. May be since 2.6.19 until 2.6.21 (As said, I did not use the ttyS2 for a while).

Konsti

Signature · 2 lines
GPG KeyID EF62FCEF
Fingerprint: 13C9 B16B 9844 EC15 CC2E  A080 1E69 3FDA EF62 FCEF