Skip to contentSkip to conversation

Fix problem with `half' pages

PATCH In review Bernhard Walle 2 participants 2 messages May 18, 2007 – May 23, 2007

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 Fix problem with `half' pages

We have a system here with following memory map:

/proc/iomem:
4ffe14000-4ffe7ffff : reserved
4ffe80000-4fffb5fff : System RAM
4fffb6000-4ffffffff : reserved

max_pfn = 1310720

In that case, the last page of the "System RAM" is not full in 16K page size configuration. That leads to an error in makedumpfile when it checks if that's a zero page. It's because it tries to read the whole page and the read() fails because it's after the end of the dump file.

That patch fixes this problem.

---
 makedumpfile.c |   15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)
makedumpfile.c +12 -3
@@ -3155,6 +3155,7 @@ create_dump_bitmap(struct DumpInfo *info
 		for (; pfn < mmd->pfn_end;
 		    pfn++, mem_map += SIZE(page),
 		    paddr += info->page_size) {
+			int page_mem_size = info->page_size;
 
 			if ((pfn != 0) && (pfn%PFN_BUFBITMAP) == 0) {
 				/*
@@ -3190,6 +3191,14 @@ create_dump_bitmap(struct DumpInfo *info
 				val = 0;
 
 			/*
+			 * check for pages that are not complete pages and
+			 * decrease the page size here
+			 */
+			if (val == 1 && !is_in_segs(info, paddr + info->page_size))
+				while (!is_in_segs(info, paddr + page_mem_size))
+					page_mem_size--;
+
+			/*
 			 * Set the 1st-bitmap.
 			 *  val  1: not memory hole
 			 *       0: memory hole
@@ -3223,13 +3232,13 @@ create_dump_bitmap(struct DumpInfo *info
 					    info->name_memory, strerror(errno));
 					goto out;
 				}
-				if (read(info->fd_memory, buf, info->page_size)
-				    != info->page_size) {
+				if (read(info->fd_memory, buf, page_mem_size)
+				    != page_mem_size) {
 					ERRMSG("Can't read the dump memory(%s). %s\n",
 					    info->name_memory, strerror(errno));
 					goto out;
 				}
-				if (is_zero_page(buf, info->page_size))
+				if (is_zero_page(buf, page_mem_size))
 					val = 0;
 			}
 			if ((info->dump_level <= DL_EXCLUDE_ZERO)

_______________________________________________
kexec mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/kexec

#1 lore raw

Hi Bernhard,

Quoted 7 lines · Bernhard Walle

We have a system here with following memory map:

/proc/iomem:
4ffe14000-4ffe7ffff : reserved
4ffe80000-4fffb5fff : System RAM
4fffb6000-4ffffffff : reserved

Quoted 8 lines

max_pfn = 1310720

In that case, the last page of the "System RAM" is not full in 16K page size configuration. That leads to an error in makedumpfile when it checks if that's a zero page. It's because it tries to read the whole page and the read() fails because it's after the end of the dump file.

That patch fixes this problem.

Thank you for the patch.
I guess there are the other problems because makedumpfile should not access incomplete page.
To confirm the problem, I'd like to see the makedumpfile log with -D option. Could you send it ?

Thanks
Ken'ichi Ohmichi

_______________________________________________
kexec mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/kexec