Skip to contentSkip to conversation

i8042 not detecting AUX port

INPUT Emmanuel Fusté 2 participants 2 messages May 23, 2007 – May 24, 2007

lore
Share & tools
lore
#0 lore raw

Hi,

Quoted 11 lines

Hi,

Quoted 8 lines · Emmanuel Fusté

Hello,

Just to let you know that since I jumped from 2.6.16 to 2.6.20.7 and 2.6.21, I need the i8042.noloop option to get the AUX port detected.
Without this option, the kernel silently omit the AUX port, only the KBD port is detected.

Quoted 4 lines
Quoted 2 lines

If Dmitry is interested by a debug log, I will recompile a kernel with i8042.debug support.

You do not need to recompile anymore, just boot with

i8042.debug.

Quoted 1 line

Ok loglevel=8 and i8042.debug do the trick.

Quoted 4 lines
Quoted 2 lines

I will try first to add the patch from Roland Scheidegger witch is in the Linus tree.

I doubt it will help, but I'd appreciate a dmesg with debug

information

Quoted 2 lines

from 2.6.21 or 2.6.22-rc2.

You will find attached two gziped complete boot/shutdown logfiles. One with noloop one without.
I did not try to recompile the kernel, I'm still busy updating the machine which did not have inet connectivity and it is a slow machine (which need a recompiled SMP kernel first). I hope it could help to spot the problem.

Thanks,
Emmanuel.
---

Créez votre adresse électronique [email protected] 1 Go d'espace de stockage, anti-spam et anti-virus intégrés.

#1 lore raw
Quoted 12 lines · Emmanuel Fusté

Hi,

Quoted 11 lines

Hi,

Quoted 8 lines · Emmanuel Fusté

Hello,

Just to let you know that since I jumped from 2.6.16 to 2.6.20.7 and 2.6.21, I need the i8042.noloop option to get the AUX port detected.
Without this option, the kernel silently omit the AUX port, only the KBD port is detected.

Quoted 8 lines
Quoted 4 lines
Quoted 2 lines

If Dmitry is interested by a debug log, I will recompile a kernel with i8042.debug support.

You do not need to recompile anymore, just boot with

i8042.debug.

Quoted 1 line

Ok loglevel=8 and i8042.debug do the trick.

Hmm, it looks like your box does not want to generate interrupts for loop command. Oh, well... I think the best solution would be to automatically set i8042_noloop on your box. Can I please get dmidecode output?

Signature · 1 line
Dmitry