hwmon/via686a: Temperature interrupt
PATCH 1/1 hwmon/via686a: Temperature interrupt
Fix the writing of the temperature interrupt configuration. The old code was working only by accident.
Signed-off-by Jean Delvare <[email protected]>
--- drivers/hwmon/via686a.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/hwmon/via686a.c +3 -2
@@ -740,9 +740,10 @@ static void via686a_init_client(struct ivia686a_write_value (client,VIA686A_REG_CONFIG , (reg|0x01 )&0x7F );/* Configure temp interrupt mode for continuous-interrupt operation */ + reg =via686a_read_value (client,VIA686A_REG_TEMP_MODE );via686a_write_value (client,VIA686A_REG_TEMP_MODE , -via686a_read_value (client,VIA686A_REG_TEMP_MODE ) & - !(VIA686A_TEMP_MODE_MASK |VIA686A_TEMP_MODE_CONTINUOUS )); + (reg & ~VIA686A_TEMP_MODE_MASK ) + |VIA686A_TEMP_MODE_CONTINUOUS ); }static struct via686a_data *via686a_update_device (struct device *dev)
Signature · 6 lines
Jean Delvare _______________________________________________ lm-sensors mailing list [email protected] http://lists.lm-sensors.org/mailman/listinfo/lm-sensors