serial: assert DTR for serial console devices
PATCH 5/5 serial: assert DTR for serial console devices
[PATCH 5/5] serial: assert DTR for serial console devices
Some RS-232 devices require DTR to be asserted before they can be used. DTR is normally asserted in uart_startup() when the port is opened. But we don't actually open serial console ports, so assert DTR when the port is added.
BTW:
earlyprintk and early_uart are hard coded to set DTR/RTS.
Signed-off-by Yinghai Lu <[email protected]>
Cc Russell King <[email protected]>
Cc Andi Kleen <[email protected]>
Signed-off-by Bjorn Helgaas <[email protected]>
drivers/serial/serial_core.c +7 -1
@@ -2303,8 +2303,14 @@ int uart_add_one_port(struct uart_driver *drv, struct uart_port *port)* It may be that the port was not available. */ if (port->type !=PORT_UNKNOWN && - port->cons && !(port->cons->flags &CON_ENABLED )) + port->cons && !(port->cons->flags &CON_ENABLED )) { +/* +* We normally assert DTR when a port is opened, but serial +* console devices aren't actually opened, so do it here. +*/ +uart_set_mctrl (port,TIOCM_DTR );register_console (port->cons); + }/* * Ensure UPF_DEAD is not set.