Adding more MIPS configuration for PNX8550 systems

@@ -498,6 +498,25 @@
 #define MIPS_CONF_AT		(_ULCAST_(3) << 13)
 #define MIPS_CONF_M		(_ULCAST_(1) << 31)
 
+/* Bits specific to the PR4450 CMEM Registers */
+#define PR4450_CMEMF_BBA     (_ULCAST_(2047) << 20)
+#define PR4450_CMEMB_BBA     20
+#define PR4450_CMEMF_SIZE    (_ULCAST_(15) << 1)
+#define PR4450_CMEMB_SIZE    1
+#define PR4450_CMEM_SIZE_1MB    0
+#define PR4450_CMEM_SIZE_2MB    1
+#define PR4450_CMEM_SIZE_4MB    2
+#define PR4450_CMEM_SIZE_8MB    3
+#define PR4450_CMEM_SIZE_16MB   4
+#define PR4450_CMEM_SIZE_32MB   5
+#define PR4450_CMEM_SIZE_64MB   6
+#define PR4450_CMEM_SIZE_128MB  7
+#define PR4450_CMEM_SIZE_256MB  8
+#define PR4450_CMEM_SIZE_512MB  9
+#define PR4450_CMEM_SIZE_1GB   10
+#define PR4450_CMEMF_VALID   (_ULCAST_(1) << 0)
+#define PR4450_CMEMB_VALID   0
+
 /*
  * Bits in the MIPS32/64 PRA coprocessor 0 config registers 1 and above.
  */

@@ -917,6 +936,14 @@
 #define read_c0_diag5()		__read_32bit_c0_register($22, 5)
 #define write_c0_diag5(val)	__write_32bit_c0_register($22, 5, val)
 
+#ifdef CONFIG_SOC_PNX8550
+#define read_c0_diag6()		__read_32bit_c0_register($22, 6)
+#define write_c0_diag6(val)	__write_32bit_c0_register($22, 6, val)
+
+#define read_c0_diag7()		__read_32bit_c0_register($22, 7)
+#define write_c0_diag7(val)	__write_32bit_c0_register($22, 7, val)
+#endif
+
 #define read_c0_debug()		__read_32bit_c0_register($23, 0)
 #define write_c0_debug(val)	__write_32bit_c0_register($23, 0, val)