Skip to contentSkip to conversation

USB low-speed bulk transfers

DISCUSSION Steinar H. Gunderson 2 participants 2 messages Jun 6, 2007 – Jun 7, 2007

lore
Share & tools
lore
#0 lore raw

[Please Cc on reply]

Hi,

I recently bought an USB MIDI interface from ESI (called “ESI MIDI Mate”). It claims to work with Linux, but doesn't -- I've already asked the manufacturer for an explanation, but as I was impatient, I hacked a bit on the drivers to actually make it work...

The /proc/bus/usb/devices entry looks like this:

  T:  Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  4 Spd=1.5 MxCh= 0
  D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
  P:  Vendor=0a92 ProdID=1001 Rev= 1.04
  S:  Manufacturer=ESI
  S:  Product=ESI MIDI Mate
  C:* #Ifs= 2 Cfg#= 1 Atr=80 MxPwr= 20mA
  I:* If#= 0 Alt= 0 #EPs= 0 Cls=01(audio) Sub=01 Prot=00 Driver=snd-usb-audio
  I:* If#= 1 Alt= 0 #EPs= 2 Cls=01(audio) Sub=03 Prot=00 Driver=snd-usb-audio
  E:  Ad=81(I) Atr=02(Bulk) MxPS=   4 Ivl=0ms
  E:  Ad=01(O) Atr=02(Bulk) MxPS=   4 Ivl=0ms

There are two points worth noting here:

- The device is USB low speed. snd-usb-audio simply checks for full/high speed, and refuses any device that isn't. I can hack around this, inverting a few checks etc., and it seems to work reasonably well (probably since the device has no PCM parts).
- Both endpoint descriptors are bulk. The HCD driver plain refuses bulk transfers for low-speed; it looks like they are disallowed in the USB standard somehow. If I comment out the check, the driver works (perfectly!), but I guess this isn't acceptable for upstream?

Could the check for low-speed bulk transfers be replaced by a kernel warning somehow? I can't see any big harm by allowing them, and obviously, Windows XP and Mac OS X does so.

I can supply a patch for the snd-usb-audio specific parts if desired, but I can't guarantee it's the correct fix for cards that support PCM. Not that I know of any PCM-capable low-speed USB sound cards out there...

/* Steinar */

Signature · 1 line
Homepage: http://www.sesse.net/
#1 lore raw
Quoted 33 lines · On Wed, 6 Jun 2007 23:20:46 +0200 "Steinar H. Gunderson"…

[Please Cc on reply]

Hi,

I recently bought an USB MIDI interface from ESI (called “ESI MIDI Mate”). It claims to work with Linux, but doesn't -- I've already asked the manufacturer for an explanation, but as I was impatient, I hacked a bit on the drivers to actually make it work...

The /proc/bus/usb/devices entry looks like this:

  T:  Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  4 Spd=1.5 MxCh= 0
  D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
  P:  Vendor=0a92 ProdID=1001 Rev= 1.04
  S:  Manufacturer=ESI
  S:  Product=ESI MIDI Mate
  C:* #Ifs= 2 Cfg#= 1 Atr=80 MxPwr= 20mA
  I:* If#= 0 Alt= 0 #EPs= 0 Cls=01(audio) Sub=01 Prot=00 Driver=snd-usb-audio
  I:* If#= 1 Alt= 0 #EPs= 2 Cls=01(audio) Sub=03 Prot=00 Driver=snd-usb-audio
  E:  Ad=81(I) Atr=02(Bulk) MxPS=   4 Ivl=0ms
  E:  Ad=01(O) Atr=02(Bulk) MxPS=   4 Ivl=0ms

There are two points worth noting here:

- The device is USB low speed. snd-usb-audio simply checks for full/high speed, and refuses any device that isn't. I can hack around this, inverting a few checks etc., and it seems to work reasonably well (probably since the device has no PCM parts).
- Both endpoint descriptors are bulk. The HCD driver plain refuses bulk transfers for low-speed; it looks like they are disallowed in the USB standard somehow. If I comment out the check, the driver works (perfectly!), but I guess this isn't acceptable for upstream?

Quoted 8 lines

Could the check for low-speed bulk transfers be replaced by a kernel warning somehow? I can't see any big harm by allowing them, and obviously, Windows XP and Mac OS X does so.

I can supply a patch for the snd-usb-audio specific parts if desired, but I can't guarantee it's the correct fix for cards that support PCM. Not that I know of any PCM-capable low-speed USB sound cards out there...

(added linux-usb-devel to cc)