S3C24XX watchdog updates
Subsystems (2)
cover S3C24XX watchdog updates
Updates for the S3C24XX watchdog driver
Signature · 3 lines
Ben ([email protected], http://www.fluff.org/) 'a smiley only costs 4 bytes'
PATCH 1/2 WATCHDOG: s3c2410_wdt announce initialisation
Announce the watchdog once the initialisation is complete. This aides debugging problems where the watchdog driver has been loaded and shows the current state for the user.
Signed-off-by Ben Dooks <[email protected]>
drivers/char/watchdog/s3c2410_wdt.c +11 -0
@@ -348,6 +348,7 @@ static irqreturn_t s3c2410wdt_irq(int irstatic int s3c2410wdt_probe (struct platform_device *pdev) {struct resource *res; +unsigned int wtcon;int started =0 ;int ret;int size;
@@ -433,6 +434,16 @@ static int s3c2410wdt_probe(struct platfs3c2410wdt_stop (); } +/* print out a statement of readiness */ + + wtcon =readl (wdt_base +S3C2410_WTCON ); + +dev_info (&pdev->dev, +"watchdog %sactive, reset %sabled, irq %sabled\n" , + (wtcon &S3C2410_WTCON_ENABLE ) ?"" :"in" , + (wtcon &S3C2410_WTCON_RSTEN ) ?"" :"dis" , + (wtcon &S3C2410_WTCON_INTEN ) ?"" :"en" ); +return 0 ; err_clk:
Signature · 3 lines
Ben ([email protected], http://www.fluff.org/) 'a smiley only costs 4 bytes'
PATCH 2/2 WATCHDOG: change s3c2410_wdt to using dev_() macros for output
In reply to Ben DooksMove to using dev_info(), dev_dbg() and dev_err() for reporting information from the driver.
Signed-off-by Ben Dooks <[email protected]>
drivers/char/watchdog/s3c2410_wdt.c +20 -16
@@ -92,6 +92,7 @@ typedef enum close_state {static DECLARE_MUTEX (open_lock); +static struct device *wdt_dev;/* platform device attached to */ static struct resource *wdt_mem;static struct resource *wdt_irq;static struct clk *wdt_clock;
@@ -180,7 +181,7 @@ static int s3c2410wdt_set_heartbeat(int }if ((count / divisor) >=0x10000 ) { - printk(KERN_ERR PFX "timeout %d too big\n", timeout); +dev_err (wdt_dev,"timeout %d too big\n" , timeout);return -EINVAL ; } }
@@ -233,7 +234,7 @@ static int s3c2410wdt_release(struct inoif (allow_close ==CLOSE_STATE_ALLOW ) {s3c2410wdt_stop (); }else { - printk(KERN_CRIT PFX "Unexpected close, not stopping watchdog!\n"); +dev_err (wdt_dev,"Unexpected close, not stopping watchdog\n" );s3c2410wdt_keepalive (); }
@@ -338,7 +339,7 @@ static struct miscdevice s3c2410wdt_miscstatic irqreturn_t s3c2410wdt_irq (int irqno,void *param) { - printk(KERN_INFO PFX "Watchdog timer expired!\n"); +dev_info (wdt_dev,"watchdog timer expired (irq)\n" );s3c2410wdt_keepalive ();return IRQ_HANDLED ;
@@ -348,6 +349,7 @@ static irqreturn_t s3c2410wdt_irq(int irstatic int s3c2410wdt_probe (struct platform_device *pdev) {struct resource *res; +struct device *dev;unsigned int wtcon;int started =0 ;int ret;
@@ -355,25 +357,28 @@ static int s3c2410wdt_probe(struct platfDBG ("%s: probe=%p\n" , __FUNCTION__, pdev); + dev = &pdev->dev; + wdt_dev = &pdev->dev; +/* get the memory region for the watchdog timer */ res =platform_get_resource (pdev,IORESOURCE_MEM ,0 );if (res ==NULL ) { - printk(KERN_INFO PFX "failed to get memory region resouce\n"); +dev_err (dev,"no memory resource specified\n" );return -ENOENT ; } size = (res->end-res->start)+1 ; wdt_mem =request_mem_region (res->start, size, pdev->name);if (wdt_mem ==NULL ) { - printk(KERN_INFO PFX "failed to get memory region\n"); +dev_err (dev,"failed to get memory region\n" ); ret = -ENOENT ; goto err_req; } wdt_base =ioremap (res->start, size);if (wdt_base ==0 ) { - printk(KERN_INFO PFX "failed to ioremap() region\n"); +dev_err (dev,"failed to ioremap() region\n" ); ret = -EINVAL ; goto err_req; }
@@ -382,20 +387,20 @@ static int s3c2410wdt_probe(struct platf wdt_irq =platform_get_resource (pdev,IORESOURCE_IRQ ,0 );if (wdt_irq ==NULL ) { - printk(KERN_INFO PFX "failed to get irq resource\n"); +dev_err (dev,"no irq resource specified\n" ); ret = -ENOENT ; goto err_map; } ret =request_irq (wdt_irq->start, s3c2410wdt_irq,0 , pdev->name, pdev);if (ret !=0 ) { - printk(KERN_INFO PFX "failed to install irq (%d)\n", ret); +dev_err (dev,"failed to install irq (%d)\n" , ret); goto err_map; } wdt_clock =clk_get (&pdev->dev,"watchdog" );if (IS_ERR (wdt_clock)) { - printk(KERN_INFO PFX "failed to find watchdog clock source\n"); +dev_err (dev,"failed to find watchdog clock source\n" ); ret =PTR_ERR (wdt_clock); goto err_irq; }
@@ -409,22 +414,22 @@ static int s3c2410wdt_probe(struct platf started =s3c2410wdt_set_heartbeat (CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME );if (started ==0 ) { - printk(KERN_INFO PFX "tmr_margin value out of range, default %d used\n", +dev_info (dev,"tmr_margin value out of range, default %d used\n" ,CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME ); }else { - printk(KERN_INFO PFX "default timer value is out of range, cannot start\n"); +dev_info (dev,"default timer value is out of range, cannot start\n" ); } } ret =misc_register (&s3c2410wdt_miscdev);if (ret) { - printk (KERN_ERR PFX "cannot register miscdev on minor=%d (%d)\n", +dev_err (dev,"cannot register miscdev on minor=%d (%d)\n" ,WATCHDOG_MINOR , ret); goto err_clk; }if (tmr_atboot && started ==0 ) { - printk(KERN_INFO PFX "Starting Watchdog Timer\n"); +dev_info (dev,"starting watchdog timer\n" );s3c2410wdt_start (); }else if (!tmr_atboot) {/* if we're not enabling the watchdog, then ensure it is
@@ -438,12 +443,11 @@ static int s3c2410wdt_probe(struct platf wtcon =readl (wdt_base +S3C2410_WTCON ); -dev_info (&pdev->dev, -"watchdog %sactive, reset %sabled, irq %sabled\n" , +dev_info (dev,"watchdog %sactive, reset %sabled, irq %sabled\n" , (wtcon &S3C2410_WTCON_ENABLE ) ?"" :"in" , (wtcon &S3C2410_WTCON_RSTEN ) ?"" :"dis" , (wtcon &S3C2410_WTCON_INTEN ) ?"" :"en" ); - +return 0 ; err_clk:
Signature · 3 lines
Ben ([email protected], http://www.fluff.org/) 'a smiley only costs 4 bytes'