Please pull 'upstream' branch of rt2x00
Hi John,
Here is the 2.0.2 release of rt2x00.
As usual most changes are code cleaning,
followed by code moving into the library modules. Unfortunately, this round still does not contain real bugfixes. Hopefully the next release will really bugfixes. ;)
The actuall diff is quite big, but that is mainly because of the cleanup in the register access functions which caused all register functions to be renamed (which prevents namespace pollution).
Ivo
---
The following changes since commit 9181e959da76d85d688d8ec763702ed2f3b4edf9:
John W. Linville (1):
rt2x00firmware.c: include delay.h to avoid build error on ppc64
are available in the git repository at:
git://git.serialmonkey.com/rt2x00.git/ upstream
Gertjan van Wingerde (1):
rt2x00: Clean up register access functions.
Ivo van Doorn (32):
rt2x00: Remove debug module parameter
rt2x00: Cleanup header
rt2x00: *_bbp_check should not return magic value
rt2x00: rt2400pci - Use BBPCSR for txdesc
rt2x00: Make antenna selection more transparent
rt2x00: Don't hardcode beacon interval
rt2x00: Move config requirement into rt2x00lib
rt2x00: Remove pointless 0xff checks
rt2x00: Correct *_bbp_check
rt2x00: Correctly set the flags for the correct flags field
rt2x00: Remove unsused structure
rt2x00: Don't export config functions to outside rt2x00lib Merge branch 'wireless-dev'
rt2x00: Constify txd_size and rxd_size
rt2x00: rt2x00lib_disable_radio should call toggle_rx
rt2x00: Move USB radio enabling/disabling into rt2x00usb
rt2x00: Remove ring->type
rt2x00: Split rings into tx and rx arrays
rt2x00: Split tx ring array into tx and bcn
rt2x00: Move rt2x00{pci,usb} shared code into rt2x00lib
rt2x00: Move ring allocation into rt2x00lib
Merge branch 'wireless-dev'
rt2x00: Fix ring array iteration
rt2x00: Remove huge macro functions
rt2x00: Include rt2x00firmware.h
rt2x00: Move ring allocation partially into rt2x00lib
rt2x00: Remove unused library call fields
rt2x00: rt61 and rt73 do not support Atim
rt2x00: link_tuner should be toggled when the radio is toggled
rt2x00: Add EEPROM recovery code for mac address Merge branch 'wireless-dev'
rt2x00: Release rt2x00 2.0.2
Mattias Nissler (1):
rt73: Prevent oops when usb device is disconnected.
drivers/net/wireless/mac80211/rt2x00/rt2400pci.c | 627 ++++++--------- drivers/net/wireless/mac80211/rt2x00/rt2400pci.h | 28 +- drivers/net/wireless/mac80211/rt2x00/rt2500pci.c | 673 +++++++--------- drivers/net/wireless/mac80211/rt2x00/rt2500pci.h | 34 +- drivers/net/wireless/mac80211/rt2x00/rt2500usb.c | 660 ++++++--------- drivers/net/wireless/mac80211/rt2x00/rt2500usb.h | 38 +- drivers/net/wireless/mac80211/rt2x00/rt2x00.h | 120 ++-- drivers/net/wireless/mac80211/rt2x00/rt2x00dev.c | 540 ++++++++++--- drivers/net/wireless/mac80211/rt2x00/rt2x00dev.h | 60 ++ .../net/wireless/mac80211/rt2x00/rt2x00firmware.c | 7 +- drivers/net/wireless/mac80211/rt2x00/rt2x00lib.h | 13 +- drivers/net/wireless/mac80211/rt2x00/rt2x00mac.c | 52 +- drivers/net/wireless/mac80211/rt2x00/rt2x00pci.c | 283 +------ drivers/net/wireless/mac80211/rt2x00/rt2x00pci.h | 29 + .../net/wireless/mac80211/rt2x00/rt2x00rfkill.c | 4 - drivers/net/wireless/mac80211/rt2x00/rt2x00usb.c | 323 +++----- drivers/net/wireless/mac80211/rt2x00/rt2x00usb.h | 14 +- drivers/net/wireless/mac80211/rt2x00/rt61pci.c | 858 +++++++++----------- drivers/net/wireless/mac80211/rt2x00/rt61pci.h | 43 +- drivers/net/wireless/mac80211/rt2x00/rt73usb.c | 758 +++++++---------- drivers/net/wireless/mac80211/rt2x00/rt73usb.h | 43 +- 21 files changed, 2363 insertions(+), 2844 deletions(-) create mode 100644 drivers/net/wireless/mac80211/rt2x00/rt2x00dev.h