Skip to contentSkip to conversation

pcmcia/net_pcmcia: all net_pcmcia modules depend on PCMCIA

PATCH Applied Andreas Herrmann 3 participants 5 messages Jun 19, 2007 – Jun 21, 2007 Network drivers

lore
Share & tools
lore
#0 lore raw

PATCH 11/12 pcmcia/net_pcmcia: all net_pcmcia modules depend on PCMCIA

Fix several build errors with PCMCIA=m && NET_PCMCIA=y:

LD .tmp_vmlinux1
drivers/built-in.o: In function `nmclan_release':
nmclan_cs.c:(.text+0x14026c): undefined reference to `pcmcia_disable_device'
...
drivers/built-in.o: In function `exit_xirc2ps_cs':
xirc2ps_cs.c:(.exit.text+0x1055): undefined reference to `pcmcia_unregister_driver'
make: *** [.tmp_vmlinux1] Error 1

---
 drivers/net/pcmcia/Kconfig |   12 ++++++++++--
 1 files changed, 10 insertions(+), 2 deletions(-)
drivers/net/pcmcia/Kconfig +10 -2
index 5d658bc..9545440 100644
@@ -23,6 +23,7 @@ if NET_PCMCIA
 
 config PCMCIA_3C589
 	tristate "3Com 3c589 PCMCIA support"
+	depends on PCMCIA
 	help
 	  Say Y here if you intend to attach a 3Com 3c589 or compatible PCMCIA
 	  (PC-card) Ethernet card to your computer.
@@ -32,6 +33,7 @@ config PCMCIA_3C589
 
 config PCMCIA_3C574
 	tristate "3Com 3c574 PCMCIA support"
+	depends on PCMCIA
 	help
 	  Say Y here if you intend to attach a 3Com 3c574 or compatible PCMCIA
 	  (PC-card) Fast Ethernet card to your computer.
@@ -41,6 +43,7 @@ config PCMCIA_3C574
 
 config PCMCIA_FMVJ18X
 	tristate "Fujitsu FMV-J18x PCMCIA support"
+	depends on PCMCIA
 	select CRC32
 	help
 	  Say Y here if you intend to attach a Fujitsu FMV-J18x or compatible
@@ -51,6 +54,7 @@ config PCMCIA_FMVJ18X
 
 config PCMCIA_PCNET
 	tristate "NE2000 compatible PCMCIA support"
+	depends on PCMCIA
 	select CRC32
 	help
 	  Say Y here if you intend to attach an NE2000 compatible PCMCIA
@@ -61,6 +65,7 @@ config PCMCIA_PCNET
 
 config PCMCIA_NMCLAN
 	tristate "New Media PCMCIA support"
+	depends on PCMCIA
 	help
 	  Say Y here if you intend to attach a New Media Ethernet or LiveWire
 	  PCMCIA (PC-card) Ethernet card to your computer.
@@ -70,6 +75,7 @@ config PCMCIA_NMCLAN
 
 config PCMCIA_SMC91C92
 	tristate "SMC 91Cxx PCMCIA support"
+	depends on PCMCIA
 	select CRC32
 	select MII
 	help
@@ -81,6 +87,7 @@ config PCMCIA_SMC91C92
 
 config PCMCIA_XIRC2PS
 	tristate "Xircom 16-bit PCMCIA support"
+	depends on PCMCIA
 	help
 	  Say Y here if you intend to attach a Xircom 16-bit PCMCIA (PC-card)
 	  Ethernet or Fast Ethernet card to your computer.
@@ -90,6 +97,7 @@ config PCMCIA_XIRC2PS
 
 config PCMCIA_AXNET
 	tristate "Asix AX88190 PCMCIA support"
+	depends on PCMCIA
 	---help---
 	  Say Y here if you intend to attach an Asix AX88190-based PCMCIA
 	  (PC-card) Fast Ethernet card to your computer.  These cards are
@@ -101,7 +109,7 @@ config PCMCIA_AXNET
 
 config ARCNET_COM20020_CS
 	tristate "COM20020 ARCnet PCMCIA support"
-	depends on ARCNET_COM20020
+	depends on ARCNET_COM20020 && PCMCIA
 	help
 	  Say Y here if you intend to attach this type of ARCnet PCMCIA card
 	  to your computer.
@@ -111,7 +119,7 @@ config ARCNET_COM20020_CS
 
 config PCMCIA_IBMTR
 	tristate "IBM PCMCIA tokenring adapter support"
-	depends on IBMTR!=y && TR && !64BIT
+	depends on IBMTR!=y && TR && !64BIT && PCMCIA
 	help
 	  Say Y here if you intend to attach this type of Token Ring PCMCIA
 	  card to your computer. You then also need to say Y to "Token Ring
Signature · 1 line
1.5.0.7
#1 lore raw
Quoted 9 lines · On Wed, 20 Jun 2007 00:52:03 +0200 Andreas Herrmann wrote:

Fix several build errors with PCMCIA=m && NET_PCMCIA=y:

   LD      .tmp_vmlinux1
   drivers/built-in.o: In function `nmclan_release':
   nmclan_cs.c:(.text+0x14026c): undefined reference to `pcmcia_disable_device'
   ...
   drivers/built-in.o: In function `exit_xirc2ps_cs':
   xirc2ps_cs.c:(.exit.text+0x1055): undefined reference to `pcmcia_unregister_driver'
   make: *** [.tmp_vmlinux1] Error 1

This is interesting. This is a result of the menuconfig changes, which made NET_PCMCIA a boolean, and then some tristates depend on NET_PCMCIA and the boolean -> tristate dependencies aren't specific enough.

Your fix is one way to do it. I'd prefer to make NET_PCMCIA a tristate instead, then let its value trickle down to the subordinate config symbols.

This probably means that some of the other menuconfig changes need to be audited for this "feature."

Here is my preferred patch.
~~~~~~~~~~

From: Randy Dunlap <[email protected]>

Make NET_PCMCIA a tristate symbol so that net/pcmcia drivers are constrained to M when needed.

---
 drivers/net/pcmcia/Kconfig |   12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)
drivers/net/pcmcia/Kconfig +6 -6
@@ -3,14 +3,14 @@
 #
 
 menuconfig NET_PCMCIA
-	bool "PCMCIA network device support"
+	tristate "PCMCIA network device support"
 	depends on PCMCIA
 	---help---
-	  Say Y if you would like to include support for any PCMCIA or CardBus
-	  network adapters, then say Y to the driver for your particular card
-	  below.  PCMCIA- or PC-cards are credit-card size devices often used
-	  with laptops computers; CardBus is the newer and faster version of
-	  PCMCIA.
+	  Say Y or M if you would like to include support for any PCMCIA or
+	  CardBus network adapters, then say Y or M to the driver for your
+	  particular card below.  PCMCIA- or PC-cards are credit-card size
+	  devices often used with laptops computers; CardBus is the newer
+	  and faster version of PCMCIA.
 
 	  To use your PC-cards, you will need supporting software from David
 	  Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
#2 lore raw

Hi Randy,

Quoted 12 lines · Randy Dunlap
Quoted 9 lines · On Wed, 20 Jun 2007 00:52:03 +0200 Andreas Herrmann wrote:

Fix several build errors with PCMCIA=m && NET_PCMCIA=y:

   LD      .tmp_vmlinux1
   drivers/built-in.o: In function `nmclan_release':
   nmclan_cs.c:(.text+0x14026c): undefined reference to `pcmcia_disable_device'
   ...
   drivers/built-in.o: In function `exit_xirc2ps_cs':
   xirc2ps_cs.c:(.exit.text+0x1055): undefined reference to `pcmcia_unregister_driver'
   make: *** [.tmp_vmlinux1] Error 1
Quoted 8 lines

This is interesting. This is a result of the menuconfig changes, which made NET_PCMCIA a boolean, and then some tristates depend on NET_PCMCIA and the boolean -> tristate dependencies aren't specific enough.

Your fix is one way to do it. I'd prefer to make NET_PCMCIA a tristate instead, then let its value trickle down to the subordinate config symbols.

This is interesting indeed. But would it make much sense to mark a menuconfig item as tristate? I suspect the problem here was simply that these PCMCIA drivers did not explicitly depend on CONFIG_PCMCIA (which they should be, considering they pull in code from that particular subsystem), which Andreas' patch resolves ...

[ Also, when we make NET_PCMCIA tristate here, I suspect it would still be possible to select these drivers as built-in (even though PCMCIA can be modular) which would still give the above errors? I didn't test, so please correct me if I'm wrong. ]

Quoted 2 lines

This probably means that some of the other menuconfig changes need to be audited for this "feature."

Right. [ I didn't check git history, but it is also possible that these drivers not depend on PCMCIA like they should have before Jan did the menuconfig conversions too. ] But IMHO, the general lesson from this case is that if some driver depends on some other symbol, then we still need to honour that dependency explicitly instead of simply putting the driver inside a "#if <menuconfig_symbol>" and only making the <menuconfig_item> itself depend on the said dependency; otherwise the boolean / tristate problems you mentioned will bite, so an audit would clearly be in order.

Satyam

#3 lore raw
Quoted 33 lines · Satyam Sharma

Hi Randy,

Quoted 14 lines · Randy Dunlap
Quoted 5 lines · On Wed, 20 Jun 2007 00:52:03 +0200 Andreas Herrmann wrote:

Fix several build errors with PCMCIA=m && NET_PCMCIA=y:

LD .tmp_vmlinux1
drivers/built-in.o: In function `nmclan_release':

   nmclan_cs.c:(.text+0x14026c): undefined reference to 

`pcmcia_disable_device'

Quoted 3 lines
   ...
   drivers/built-in.o: In function `exit_xirc2ps_cs':
   xirc2ps_cs.c:(.exit.text+0x1055): undefined reference to 

`pcmcia_unregister_driver'

Quoted 1 line
   make: *** [.tmp_vmlinux1] Error 1
Quoted 8 lines

This is interesting. This is a result of the menuconfig changes, which made NET_PCMCIA a boolean, and then some tristates depend on NET_PCMCIA and the boolean -> tristate dependencies aren't specific enough.

Your fix is one way to do it. I'd prefer to make NET_PCMCIA a tristate instead, then let its value trickle down to the subordinate config symbols.

This is interesting indeed. But would it make much sense to mark a menuconfig item as tristate? I suspect the problem here was simply that these PCMCIA drivers did not explicitly depend on CONFIG_PCMCIA (which they should be, considering they pull in code from that particular subsystem), which Andreas' patch resolves ...

Quoted 4 lines

[ Also, when we make NET_PCMCIA tristate here, I suspect it would still be possible to select these drivers as built-in (even though PCMCIA can be modular) which would still give the above errors? I didn't test, so please correct me if I'm wrong. ]

I did test it. If PCMCIA=m, with my patch, the NET_PCMCIA drivers cannot be configured as built-in.

Quoted 15 lines
Quoted 2 lines

This probably means that some of the other menuconfig changes need to be audited for this "feature."

Right. [ I didn't check git history, but it is also possible that these drivers not depend on PCMCIA like they should have before Jan did the menuconfig conversions too. ] But IMHO, the general lesson from this case is that if some driver depends on some other symbol, then we still need to honour that dependency explicitly instead of simply putting the driver inside a "#if <menuconfig_symbol>" and only making the <menuconfig_item> itself depend on the said dependency; otherwise the boolean / tristate problems you mentioned will bite, so an audit would clearly be in order.

Satyam

Signature · 2 lines
~Randy
*** Remember to use Documentation/SubmitChecklist when testing your code ***
#4 lore raw
In reply to Randy Dunlap
Quoted 41 lines · Randy Dunlap
Quoted 9 lines · On Wed, 20 Jun 2007 00:52:03 +0200 Andreas Herrmann wrote:

Fix several build errors with PCMCIA=m && NET_PCMCIA=y:

   LD      .tmp_vmlinux1
   drivers/built-in.o: In function `nmclan_release':
   nmclan_cs.c:(.text+0x14026c): undefined reference to `pcmcia_disable_device'
   ...
   drivers/built-in.o: In function `exit_xirc2ps_cs':
   xirc2ps_cs.c:(.exit.text+0x1055): undefined reference to `pcmcia_unregister_driver'
   make: *** [.tmp_vmlinux1] Error 1

This is interesting. This is a result of the menuconfig changes, which made NET_PCMCIA a boolean, and then some tristates depend on NET_PCMCIA and the boolean -> tristate dependencies aren't specific enough.

Your fix is one way to do it. I'd prefer to make NET_PCMCIA a tristate instead, then let its value trickle down to the subordinate config symbols.

This probably means that some of the other menuconfig changes need to be audited for this "feature."

Here is my preferred patch.
~~~~~~~~~~

From: Randy Dunlap <[email protected]>

Make NET_PCMCIA a tristate symbol so that net/pcmcia drivers are constrained to M when needed.

---
 drivers/net/pcmcia/Kconfig |   12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

drivers/net/pcmcia/Kconfig line 7

Quoted 6 lines
drivers/net/pcmcia/Kconfig +1 -1
@@ -3,14 +3,14 @@
 #
 
 menuconfig NET_PCMCIA
-	bool "PCMCIA network device support"
+	tristate "PCMCIA network device support"
 	depends on PCMCIA

Yes this solves the problem.
... and is the preferred variant.

Regards,

Andreas

Signature · 5 lines
Operating | AMD Saxony Limited Liability Company & Co. KG,
  System  | Wilschdorfer Landstr. 101, 01109 Dresden, Germany
 Research | Register Court Dresden: HRA 4896, General Partner authorized
  Center  | to represent: AMD Saxony LLC (Wilmington, Delaware, US)
  (OSRC)  | General Manager of AMD Saxony LLC: Dr. Hans-R. Deppe, Thomas McCoy