Skip to contentSkip to conversation

e1000: #if 0 two functions

PATCH New Adrian Bunk 1 participant 1 message Jul 1, 2007

Subsystems (2)
Networking Network drivers
lore
Share & tools
lore

Adrian Bunk

author
#0 lore raw

PATCH 1/1 e1000: #if 0 two functions

e1000_{read,write}_pci_cfg() are no longer used.

Signed-off-by Adrian Bunk <[email protected]>

---

This patch has been sent on:
- 5 Jun 2007

 drivers/net/e1000/e1000_hw.h   |    2 --
 drivers/net/e1000/e1000_main.c |    4 ++++
 2 files changed, 4 insertions(+), 2 deletions(-)
drivers/net/e1000/e1000_hw.h renamed from drivers/net/e1000/e1000_hw.h.old +0 -2
@@ -421,8 +421,6 @@ void e1000_tbi_adjust_stats(struct e1000
 void e1000_get_bus_info(struct e1000_hw *hw);
 void e1000_pci_set_mwi(struct e1000_hw *hw);
 void e1000_pci_clear_mwi(struct e1000_hw *hw);
-void e1000_read_pci_cfg(struct e1000_hw *hw, uint32_t reg, uint16_t * value);
-void e1000_write_pci_cfg(struct e1000_hw *hw, uint32_t reg, uint16_t * value);
 int32_t e1000_read_pcie_cap_reg(struct e1000_hw *hw, uint32_t reg, uint16_t *value);
 void e1000_pcix_set_mmrbc(struct e1000_hw *hw, int mmrbc);
 int e1000_pcix_get_mmrbc(struct e1000_hw *hw);
drivers/net/e1000/e1000_main.c renamed from drivers/net/e1000/e1000_main.c.old +4 -0
@@ -4888,6 +4888,8 @@ e1000_pci_clear_mwi(struct e1000_hw *hw)
 	pci_clear_mwi(adapter->pdev);
 }
 
+#if 0
+
 void
 e1000_read_pci_cfg(struct e1000_hw *hw, uint32_t reg, uint16_t *value)
 {

@@ -4904,6 +4906,8 @@ e1000_write_pci_cfg(struct e1000_hw *hw,
 	pci_write_config_word(adapter->pdev, reg, *value);
 }
 
+#endif  /*  0  */
+
 int
 e1000_pcix_get_mmrbc(struct e1000_hw *hw)
 {