Skip to contentSkip to conversation

add PCI-ID for Adaptec 1430SA 4-Port SATA Controller

PATCH In review Florian Attenberger 2 participants 4 messages Jun 30, 2007 – Jul 3, 2007 libata

lore
Share & tools
lore

Florian Attenberger

author
#0 lore raw

PATCH 1/1 add PCI-ID for Adaptec 1430SA 4-Port SATA Controller

Hi,

added this pci id to support my:
lspci:
01:00.0 RAID bus controller: Adaptec Unknown device 0243 (rev 02) lspci -n:
01:00.0 0104: 9005:0243 (rev 02)

seems to work fine.

florian attenberger

drivers/ata/sata_mv.c +3 -0
@@ -582,6 +582,9 @@ static const struct pci_device_id mv_pci
 
 	{ PCI_VDEVICE(ADAPTEC2, 0x0241), chip_604x },
 
+	/* Adaptec 1430SA */
+	{ PCI_VDEVICE(ADAPTEC2, 0x0243), chip_7042 },
+
 	{ PCI_VDEVICE(TTI, 0x2310), chip_7042 },
 
 	/* add Marvell 7042 support */
#1 lore raw
Quoted 16 lines · Florian Attenberger

Hi,

added this pci id to support my:
lspci:
01:00.0 RAID bus controller: Adaptec Unknown device 0243 (rev 02) lspci -n:
01:00.0 0104: 9005:0243 (rev 02)

seems to work fine.

florian attenberger

drivers/ata/sata_mv.c static const struct pci_device_id mv_pci · line 588

Quoted 7 lines
drivers/ata/sata_mv.c +3 -0
@@ -582,6 +582,9 @@ static const struct pci_device_id mv_pci
 
 	{ PCI_VDEVICE(ADAPTEC2, 0x0241), chip_604x },
 
+	/* Adaptec 1430SA */
+	{ PCI_VDEVICE(ADAPTEC2, 0x0243), chip_7042 },
+
 	{ PCI_VDEVICE(TTI, 0x2310), chip_7042 },

Please do me a favor and resend with the Signed-off-by line as described by Documentation/SubmittingPatches and
http://linux.yyz.us/patch-format.html

Also, since your email is copied verbatim into the permanent kernel changelog, please remove all superfluous comments like "Hi," and "florian attenberger", or add a "---" separator and move the comments after the separator.

author
#2 lore raw

PATCH 1/1 sata_mv: PCI-ID for Adaptec 1430SA SATA Controller

Signed-off-by Florian Attenberger <[email protected]>
drivers/ata/sata_mv.c +3 -0
@@ -582,6 +582,9 @@ static const struct pci_device_id mv_pci
 
 	{ PCI_VDEVICE(ADAPTEC2, 0x0241), chip_604x },
 
+	/* Adaptec 1430SA */
+	{ PCI_VDEVICE(ADAPTEC2, 0x0243), chip_7042 },
+
 	{ PCI_VDEVICE(TTI, 0x2310), chip_7042 },
 
 	/* add Marvell 7042 support */
Applied
#3 lore raw

Re: [PATCH 2.6.22-rc6] sata_mv: PCI-ID for Adaptec 1430SA SATA Controller

drivers/ata/sata_mv.c static const struct pci_device_id mv_pci · line 587

Quoted 12 lines · Florian Attenberger
Signed-off-by Florian Attenberger <[email protected]>
drivers/ata/sata_mv.c +3 -0
@@ -582,6 +582,9 @@ static const struct pci_device_id mv_pci
 
 	{ PCI_VDEVICE(ADAPTEC2, 0x0241), chip_604x },
 
+	/* Adaptec 1430SA */
+	{ PCI_VDEVICE(ADAPTEC2, 0x0243), chip_7042 },
+

applied