Skip to contentSkip to conversation

PM: Optional beeping during resume from suspend to RAM

PATCH In review Rafael J. Wysocki 2 participants 4 messages Jul 6, 2007 – Jul 7, 2007

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

cover PM: Optional beeping during resume from suspend to RAM

Hi,

The following two patches:
* add a feature allowing the user to make the system beep during a resume from RAM on i386 and x86_64 (useful for users with broken resume, so that they can check if the control reaches the kernel after a wake-up event)
* integrate the new feature with the existing acpi_sleep flags
* fix acpi_sleep_setup so that the order of parameters in the command line does not matter.

Greetings,
Rafael

Signature · 1 line
"Premature optimization is the root of all evil." - Donald Knuth
#1 lore raw

PATCH 1/2 PM: Optional beeping during resume from suspend to RAM

From: Nigel Cunningham <[email protected]>

Add a feature allowing the user to make the system beep during a resume from suspend to RAM, on x86_64 and i386.

This is useful for the users with broken resume from RAM, so that they can verify if the control reaches the kernel after a wake-up event.

---
 arch/i386/kernel/acpi/wakeup.S   |   27 +++++++++++++++++++++++++++
 arch/x86_64/kernel/acpi/wakeup.S |   25 +++++++++++++++++++++++++
 include/linux/acpi.h             |    1 +
 kernel/power/main.c              |   23 +++++++++++++++++++++++
 4 files changed, 76 insertions(+)
arch/i386/kernel/acpi/wakeup.S +27 -0
Index: linux-2.6.22-rc6-mm1/arch/i386/kernel/acpi/wakeup.S
===================================================================
@@ -28,6 +28,21 @@
 	movb	$15, %al; 	\
 	outb	%al, $66;
 
+#define BEEP \
+	inb	$97, %al; 	\
+	outb	%al, $0x80; 	\
+	movb	$3, %al; 	\
+	outb	%al, $97; 	\
+	outb	%al, $0x80; 	\
+	movb	$-74, %al; 	\
+	outb	%al, $67; 	\
+	outb	%al, $0x80; 	\
+	movb	$-119, %al; 	\
+	outb	%al, $66; 	\
+	outb	%al, $0x80; 	\
+	movb	$15, %al; 	\
+	outb	%al, $66;
+
 ALIGN
 	.align	4096
 ENTRY(wakeup_start)
@@ -49,6 +64,11 @@ wakeup_code:
 	movw	%cs, %ax
 	movw	%ax, %ds					# Make ds:0 point to wakeup_start
 	movw	%ax, %ss
+
+	testl   $1, beep_flags - wakeup_code
+	jz      1f
+	BEEP
+1:
 	mov	$(wakeup_stack - wakeup_code), %sp		# Private stack is needed for ASUS board
 	movw	$0x0e00 + 'S', %fs:(0x12)
 
@@ -106,6 +126,10 @@ wakeup_code:
 	cmpl	$0x12345678, %eax
 	jne	bogus_real_magic
 
+	testl   $2, beep_flags - wakeup_code
+	jz      1f
+	BEEP
+1:
 	ljmpl	$__KERNEL_CS,$wakeup_pmode_return
 
 real_save_gdt:	.word 0
@@ -116,6 +140,7 @@ real_save_cr4:	.long 0
 real_magic:	.long 0
 video_mode:	.long 0
 video_flags:	.long 0
+beep_flags:	.long 0
 real_efer_save_restore:	.long 0
 real_save_efer_edx: 	.long 0
 real_save_efer_eax: 	.long 0
@@ -280,6 +305,8 @@ ENTRY(acpi_copy_wakeup_routine)
 	movl	%edx, video_mode - wakeup_start (%eax)
 	movl	acpi_video_flags, %edx
 	movl	%edx, video_flags - wakeup_start (%eax)
+	movl	s2ram_beep, %edx
+	movl	%edx, beep_flags - wakeup_start (%eax)
 	movl	$0x12345678, real_magic - wakeup_start (%eax)
 	movl	$0x12345678, saved_magic
 	popl	%ebx
arch/x86_64/kernel/acpi/wakeup.S +25 -0
Index: linux-2.6.22-rc6-mm1/arch/x86_64/kernel/acpi/wakeup.S
===================================================================
@@ -16,6 +16,21 @@
 # cs = 0x1234, eip = 0x05
 #
 
+#define BEEP \
+	inb	$97, %al; 	\
+	outb	%al, $0x80; 	\
+	movb	$3, %al; 	\
+	outb	%al, $97; 	\
+	outb	%al, $0x80; 	\
+	movb	$-74, %al; 	\
+	outb	%al, $67; 	\
+	outb	%al, $0x80; 	\
+	movb	$-119, %al; 	\
+	outb	%al, $66; 	\
+	outb	%al, $0x80; 	\
+	movb	$15, %al; 	\
+	outb	%al, $66;
+
 
 ALIGN
 	.align	16
@@ -33,6 +48,13 @@ wakeup_code:
 	movw	%cs, %ax
 	movw	%ax, %ds		# Make ds:0 point to wakeup_start
 	movw	%ax, %ss
+
+	# Data segment must be set up before we can see whether to beep.
+	testl   $1, beep_flags - wakeup_code
+	jz      1f
+	BEEP
+1:
+
 					# Private stack is needed for ASUS board
 	mov	$(wakeup_stack - wakeup_code), %sp
 
@@ -229,6 +251,7 @@ gdt_48a:
 	.long   gdta - wakeup_code              # gdt base (relocated in later)
 	
 real_magic:	.quad 0
+beep_flags:	.quad 0
 video_mode:	.quad 0
 video_flags:	.quad 0
 
@@ -344,6 +367,8 @@ ENTRY(acpi_copy_wakeup_routine)
 	pushq	%rax
 	pushq	%rdx
 
+	movl	s2ram_beep, %edx
+	movl	%edx, beep_flags - wakeup_start (,%rdi)
 	movl	saved_video_mode, %edx
 	movl	%edx, video_mode - wakeup_start (,%rdi)
 	movl	acpi_video_flags, %edx
include/linux/acpi.h +1 -0
Index: linux-2.6.22-rc6-mm1/include/linux/acpi.h
===================================================================
@@ -121,6 +121,7 @@ extern int pci_mmcfg_config_num;
 
 extern int sbf_port;
 extern unsigned long acpi_video_flags;
+extern unsigned long s2ram_beep;
 
 #else	/* !CONFIG_ACPI */
 
kernel/power/main.c +23 -0
Index: linux-2.6.22-rc6-mm1/kernel/power/main.c
===================================================================
@@ -332,6 +332,27 @@ static ssize_t state_store(struct kset *
 
 power_attr(state);
 
+unsigned long s2ram_beep = 0;
+
+static ssize_t s2ram_beep_show(struct kset *kset, char *buf)
+{
+	return sprintf(buf, "%d\n", s2ram_beep);
+}
+
+static ssize_t
+s2ram_beep_store(struct kset *kset, const char *buf, size_t n)
+{
+	int val;
+
+	if (sscanf(buf, "%d", &val) > 0) {
+		s2ram_beep = val;
+		return n;
+	}
+	return -EINVAL;
+}
+
+power_attr(s2ram_beep);
+
 #ifdef CONFIG_PM_TRACE
 int pm_trace_enabled;
 
@@ -357,11 +378,13 @@ power_attr(pm_trace);
 static struct attribute * g[] = {
 	&state_attr.attr,
 	&pm_trace_attr.attr,
+	&s2ram_beep_attr.attr,
 	NULL,
 };
 #else
 static struct attribute * g[] = {
 	&state_attr.attr,
+	&s2ram_beep_attr.attr,
 	NULL,
 };
 #endif /* CONFIG_PM_TRACE */
#2 lore raw
Quoted 9 lines · Rafael J. Wysocki

From: Nigel Cunningham <[email protected]>

Add a feature allowing the user to make the system beep during a resume from suspend to RAM, on x86_64 and i386.

This is useful for the users with broken resume from RAM, so that they can verify if the control reaches the kernel after a wake-up event.

ACK... (but this should really go in with the second patch in series.)

Pavel

Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
#3 lore raw

PATCH 2/2 PM: Integrate beeping flag with existing acpi_sleep flags

In reply to Rafael J. Wysocki

From: Pavel Machek <[email protected]>

Move "debug during resume from s2ram" into the variable we already use for real-mode flags to simplify code. It also closes nasty trap for the user in acpi_sleep_setup; order of parameters actually mattered there, acpi_sleep=s3_bios,s3_mode doing something different from acpi_sleep=s3_mode,s3_bios.

---
 arch/i386/kernel/acpi/sleep.c    |   12 ++++++++----
 arch/i386/kernel/acpi/wakeup.S   |   18 ++++++++----------
 arch/x86_64/kernel/acpi/sleep.c  |    8 +++++---
 arch/x86_64/kernel/acpi/wakeup.S |   15 ++++++---------
 include/linux/acpi.h             |    3 +--
 kernel/power/main.c              |   23 -----------------------
 kernel/sysctl.c                  |    2 +-
 7 files changed, 29 insertions(+), 52 deletions(-)
arch/i386/kernel/acpi/sleep.c +8 -4
Index: linux-2.6.22-rc6-mm1/arch/i386/kernel/acpi/sleep.c
===================================================================
@@ -14,7 +14,7 @@
 
 /* address in low memory of the wakeup routine. */
 unsigned long acpi_wakeup_address = 0;
-unsigned long acpi_video_flags;
+unsigned long acpi_realmode_flags;
 extern char wakeup_start, wakeup_end;
 
 extern unsigned long FASTCALL(acpi_copy_wakeup_routine(unsigned long));
@@ -68,9 +68,11 @@ static int __init acpi_sleep_setup(char 
 {
 	while ((str != NULL) && (*str != '\0')) {
 		if (strncmp(str, "s3_bios", 7) == 0)
-			acpi_video_flags = 1;
+			acpi_realmode_flags |= 1;
 		if (strncmp(str, "s3_mode", 7) == 0)
-			acpi_video_flags |= 2;
+			acpi_realmode_flags |= 2;
+		if (strncmp(str, "s3_beep", 7) == 0)
+			acpi_realmode_flags |= 4;
 		str = strchr(str, ',');
 		if (str != NULL)
 			str += strspn(str, ", \t");
@@ -80,9 +82,11 @@ static int __init acpi_sleep_setup(char 
 
 __setup("acpi_sleep=", acpi_sleep_setup);
 
+/* Ouch, we want to delete this. We already have better version in userspace, in 
+   s2ram from suspend.sf.net project */
 static __init int reset_videomode_after_s3(struct dmi_system_id *d)
 {
-	acpi_video_flags |= 2;
+	acpi_realmode_flags |= 2;
 	return 0;
 }
 
arch/i386/kernel/acpi/wakeup.S +8 -10
Index: linux-2.6.22-rc6-mm1/arch/i386/kernel/acpi/wakeup.S
===================================================================
@@ -65,7 +65,7 @@ wakeup_code:
 	movw	%ax, %ds					# Make ds:0 point to wakeup_start
 	movw	%ax, %ss
 
-	testl   $1, beep_flags - wakeup_code
+	testl   $4, realmode_flags - wakeup_code
 	jz      1f
 	BEEP
 1:
@@ -79,7 +79,7 @@ wakeup_code:
 	cmpl	$0x12345678, %eax
 	jne	bogus_real_magic
 
-	testl	$1, video_flags - wakeup_code
+	testl	$1, realmode_flags - wakeup_code
 	jz	1f
 	lcall   $0xc000,$3
 	movw	%cs, %ax
@@ -87,7 +87,7 @@ wakeup_code:
 	movw	%ax, %ss
 1:
 
-	testl	$2, video_flags - wakeup_code
+	testl	$2, realmode_flags - wakeup_code
 	jz	1f
 	mov	video_mode - wakeup_code, %ax
 	call	mode_set
@@ -126,11 +126,11 @@ wakeup_code:
 	cmpl	$0x12345678, %eax
 	jne	bogus_real_magic
 
-	testl   $2, beep_flags - wakeup_code
+	testl   $8, realmode_flags - wakeup_code
 	jz      1f
 	BEEP
 1:
-	ljmpl	$__KERNEL_CS,$wakeup_pmode_return
+	ljmpl	$__KERNEL_CS, $wakeup_pmode_return
 
 real_save_gdt:	.word 0
 		.long 0
@@ -139,7 +139,7 @@ real_save_cr3:	.long 0
 real_save_cr4:	.long 0
 real_magic:	.long 0
 video_mode:	.long 0
-video_flags:	.long 0
+realmode_flags:	.long 0
 beep_flags:	.long 0
 real_efer_save_restore:	.long 0
 real_save_efer_edx: 	.long 0
@@ -303,10 +303,8 @@ ENTRY(acpi_copy_wakeup_routine)
 
 	movl	saved_videomode, %edx
 	movl	%edx, video_mode - wakeup_start (%eax)
-	movl	acpi_video_flags, %edx
-	movl	%edx, video_flags - wakeup_start (%eax)
-	movl	s2ram_beep, %edx
-	movl	%edx, beep_flags - wakeup_start (%eax)
+	movl	acpi_realmode_flags, %edx
+	movl	%edx, realmode_flags - wakeup_start (%eax)
 	movl	$0x12345678, real_magic - wakeup_start (%eax)
 	movl	$0x12345678, saved_magic
 	popl	%ebx
arch/x86_64/kernel/acpi/sleep.c +5 -3
Index: linux-2.6.22-rc6-mm1/arch/x86_64/kernel/acpi/sleep.c
===================================================================
@@ -55,7 +55,7 @@
 
 /* address in low memory of the wakeup routine. */
 unsigned long acpi_wakeup_address = 0;
-unsigned long acpi_video_flags;
+unsigned long acpi_realmode_flags;
 extern char wakeup_start, wakeup_end;
 
 extern unsigned long acpi_copy_wakeup_routine(unsigned long);
@@ -103,9 +103,11 @@ static int __init acpi_sleep_setup(char 
 {
 	while ((str != NULL) && (*str != '\0')) {
 		if (strncmp(str, "s3_bios", 7) == 0)
-			acpi_video_flags = 1;
+			acpi_realmode_flags |= 1;
 		if (strncmp(str, "s3_mode", 7) == 0)
-			acpi_video_flags |= 2;
+			acpi_realmode_flags |= 2;
+		if (strncmp(str, "s3_beep", 7) == 0)
+			acpi_realmode_flags |= 4;
 		str = strchr(str, ',');
 		if (str != NULL)
 			str += strspn(str, ", \t");
arch/x86_64/kernel/acpi/wakeup.S +6 -9
Index: linux-2.6.22-rc6-mm1/arch/x86_64/kernel/acpi/wakeup.S
===================================================================
@@ -50,7 +50,7 @@ wakeup_code:
 	movw	%ax, %ss
 
 	# Data segment must be set up before we can see whether to beep.
-	testl   $1, beep_flags - wakeup_code
+	testl   $4, realmode_flags - wakeup_code
 	jz      1f
 	BEEP
 1:
@@ -70,7 +70,7 @@ wakeup_code:
 	testl	%eax, %eax
 	jnz	no_longmode
 
-	testl	$1, video_flags - wakeup_code
+	testl	$1, realmode_flags - wakeup_code
 	jz	1f
 	lcall   $0xc000,$3
 	movw	%cs, %ax
@@ -78,7 +78,7 @@ wakeup_code:
 	movw	%ax, %ss
 1:
 
-	testl	$2, video_flags - wakeup_code
+	testl	$2, realmode_flags - wakeup_code
 	jz	1f
 	mov	video_mode - wakeup_code, %ax
 	call	mode_seta
@@ -251,9 +251,8 @@ gdt_48a:
 	.long   gdta - wakeup_code              # gdt base (relocated in later)
 	
 real_magic:	.quad 0
-beep_flags:	.quad 0
 video_mode:	.quad 0
-video_flags:	.quad 0
+realmode_flags:	.quad 0
 
 .code16
 bogus_real_magic:
@@ -367,12 +366,10 @@ ENTRY(acpi_copy_wakeup_routine)
 	pushq	%rax
 	pushq	%rdx
 
-	movl	s2ram_beep, %edx
-	movl	%edx, beep_flags - wakeup_start (,%rdi)
 	movl	saved_video_mode, %edx
 	movl	%edx, video_mode - wakeup_start (,%rdi)
-	movl	acpi_video_flags, %edx
-	movl	%edx, video_flags - wakeup_start (,%rdi)
+	movl	acpi_realmode_flags, %edx
+	movl	%edx, realmode_flags - wakeup_start (,%rdi)
 	movq	$0x12345678, real_magic - wakeup_start (,%rdi)
 	movq	$0x123456789abcdef0, %rdx
 	movq	%rdx, saved_magic
include/linux/acpi.h +1 -2
Index: linux-2.6.22-rc6-mm1/include/linux/acpi.h
===================================================================
@@ -120,8 +120,7 @@ extern struct acpi_mcfg_allocation *pci_
 extern int pci_mmcfg_config_num;
 
 extern int sbf_port;
-extern unsigned long acpi_video_flags;
-extern unsigned long s2ram_beep;
+extern unsigned long acpi_realmode_flags;
 
 #else	/* !CONFIG_ACPI */
 
kernel/power/main.c +0 -23
Index: linux-2.6.22-rc6-mm1/kernel/power/main.c
===================================================================
@@ -332,27 +332,6 @@ static ssize_t state_store(struct kset *
 
 power_attr(state);
 
-unsigned long s2ram_beep = 0;
-
-static ssize_t s2ram_beep_show(struct kset *kset, char *buf)
-{
-	return sprintf(buf, "%d\n", s2ram_beep);
-}
-
-static ssize_t
-s2ram_beep_store(struct kset *kset, const char *buf, size_t n)
-{
-	int val;
-
-	if (sscanf(buf, "%d", &val) > 0) {
-		s2ram_beep = val;
-		return n;
-	}
-	return -EINVAL;
-}
-
-power_attr(s2ram_beep);
-
 #ifdef CONFIG_PM_TRACE
 int pm_trace_enabled;
 
@@ -378,13 +357,11 @@ power_attr(pm_trace);
 static struct attribute * g[] = {
 	&state_attr.attr,
 	&pm_trace_attr.attr,
-	&s2ram_beep_attr.attr,
 	NULL,
 };
 #else
 static struct attribute * g[] = {
 	&state_attr.attr,
-	&s2ram_beep_attr.attr,
 	NULL,
 };
 #endif /* CONFIG_PM_TRACE */
kernel/sysctl.c +1 -1
Index: linux-2.6.22-rc6-mm1/kernel/sysctl.c
===================================================================
@@ -699,7 +699,7 @@ static ctl_table kern_table[] = {
 	{
 		.ctl_name	= KERN_ACPI_VIDEO_FLAGS,
 		.procname	= "acpi_video_flags",
-		.data		= &acpi_video_flags,
+		.data		= &acpi_realmode_flags,
 		.maxlen		= sizeof (unsigned long),
 		.mode		= 0644,
 		.proc_handler	= &proc_doulongvec_minmax,