Skip to contentSkip to conversation

remove the documentation for the legacy CDROM drivers

PATCH In review Adrian Bunk 2 participants 2 messages Jul 11, 2007

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 remove the documentation for the legacy CDROM drivers

This patch removes the documentation for the removed legacy CDROM drivers.

---

 Documentation/cdrom/00-INDEX        |   22 
 Documentation/cdrom/aztcd           |  822 ---------------------
 Documentation/cdrom/cdu31a          |  196 -----
 Documentation/cdrom/cm206           |  185 ----
 Documentation/cdrom/gscd            |   60 -
 Documentation/cdrom/isp16           |  100 --
 Documentation/cdrom/mcdx            |   29 
 Documentation/cdrom/optcd           |   57 -
 Documentation/cdrom/sbpcd           | 1061 ----------------------------
 Documentation/cdrom/sjcd            |   60 -
 Documentation/cdrom/sonycd535       |  122 ---
 Documentation/kernel-parameters.txt |   37 
 MAINTAINERS                         |   12 
 13 files changed, 2763 deletions(-)
Documentation/kernel-parameters.txt renamed from Documentation/kernel-parameters.txt.old +0 -37
@@ -34,7 +34,6 @@
 	APIC	APIC support is enabled.
 	APM	Advanced Power Management support is enabled.
 	AX25	Appropriate AX.25 support is enabled.
-	CD	Appropriate CD support is enabled.
 	DRM	Direct Rendering Management support is enabled.
 	EDD	BIOS Enhanced Disk Drive Services (EDD) is enabled
 	EFI	EFI Partitioning (GPT) is enabled
@@ -319,9 +318,6 @@
 
 	autotest	[IA64]
 
-	aztcd=		[HW,CD] Aztech CD268 CDROM driver
-			Format: <io>,0x79 (?)
-
 	baycom_epp=	[HW,AX25]
 			Format: <io>,<mode>
 
@@ -364,10 +360,6 @@
 			possible to determine what the correct size should be.
 			This option provides an override for these situations.
 
-	cdu31a=		[HW,CD]
-			Format: <io>,<irq>[,PAS]
-			See header of drivers/cdrom/cdu31a.c.
-
 	chandev=	[HW,NET] Generic channel device initialisation
 
 	checkreqprot	[SELINUX] Set initial checkreqprot flag value.
@@ -421,9 +413,6 @@
 	hpet=		[X86-32,HPET] option to disable HPET and use PIT.
 			Format: disable
 
-	cm206=		[HW,CD]
-			Format: { auto | [<io>,][<irq>] }
-
 	com20020=	[HW,NET] ARCnet - COM20020 chipset
 			Format:
 			<io>[,<irq>[,<nodeID>[,<backplane>[,<ckp>[,<timeout>]]]]]
@@ -666,9 +655,6 @@
 	gpt		[EFI] Forces disk with valid GPT signature but
 			invalid Protective MBR to be treated as GPT.
 
-	gscd=		[HW,CD]
-			Format: <io>
-
 	gvp11=		[HW,SCSI]
 
 	hashdist=	[KNL,NUMA] Large hashes allocated during boot
@@ -849,9 +835,6 @@
 			tasks in the system -- can cause problems and
 			suboptimal load balancer performance.
 
-	isp16=		[HW,CD]
-			Format: <io>,<irq>,<dma>,<setup>
-
 	iucv=		[HW,NET]
 
 	js=		[HW,JOY] Analog joystick
@@ -1006,11 +989,6 @@
 
 	mcatest=	[IA-64]
 
-	mcd=		[HW,CD]
-			Format: <port>,<irq>,<mitsumi_bug_93_wait>
-
-	mcdx=		[HW,CD]
-
 	mce		[IA-32] Machine Check Exception
 
 	md=		[HW] RAID subsystems devices and level
@@ -1243,9 +1221,6 @@
 	oprofile.timer=	[HW]
 			Use timer interrupt instead of performance counters
 
-	optcd=		[HW,CD]
-			Format: <io>
-
 	osst=		[HW,SCSI] SCSI Tape Driver
 			Format: <buffer_size>,<write_threshold>
 			See also Documentation/scsi/st.txt.
@@ -1561,11 +1536,6 @@
 
 	sbni=		[NET] Granch SBNI12 leased line adapter
 
-	sbpcd=		[HW,CD] Soundblaster CD adapter
-			Format: <io>,<type>
-			See a comment before function sbpcd_setup() in
-			drivers/cdrom/sbpcd.c.
-
 	sc1200wdt=	[HW,WDT] SC1200 WDT (watchdog) driver
 			Format: <io>[,<timeout>[,<isapnp>]]
 
@@ -1618,10 +1588,6 @@
 	simeth=		[IA-64]
 	simscsi=
 
-	sjcd=		[HW,CD]
-			Format: <io>,<irq>,<dma>
-			See header of drivers/cdrom/sjcd.c.
-
 	slram=		[HW,MTD]
 
 	slub_debug[=options[,slabs]]	[MM, SLUB]
@@ -1798,9 +1764,6 @@
 
 	snd-ymfpci=	[HW,ALSA]
 
-	sonycd535=	[HW,CD]
-			Format: <io>[,<irq>]
-
 	sonypi.*=	[HW] Sony Programmable I/O Control Device driver
 			See Documentation/sonypi.txt
 
MAINTAINERS renamed from MAINTAINERS.old +0 -12
@@ -2657,12 +2657,6 @@
 W:	http://www.netlab.is.tsukuba.ac.jp/~yokota/izumi/ninja/
 S:	Maintained
 
-NON-IDE/NON-SCSI CDROM DRIVERS [GENERAL] (come on, crew - mark your responsibility)
-P:	Eberhard Moenkeberg
-M:	[email protected]
-L:	[email protected]
-S:	Maintained
-
 NTFS FILESYSTEM
 P:	Anton Altaparmakov
 M:	[email protected]
@@ -3127,12 +3121,6 @@
 W:	http://www.mihu.de/linux/saa7146
 S:	Maintained
 
-SBPCD CDROM DRIVER
-P:	Eberhard Moenkeberg
-M:	[email protected]
-L:	[email protected]
-S:	Maintained
-
 SC1200 WDT DRIVER
 P:	Zwane Mwaikambo
 M:	[email protected]
Documentation/cdrom/00-INDEX renamed from Documentation/cdrom/00-INDEX.old +0 -22
@@ -2,32 +2,10 @@
 	- this file (info on CD-ROMs and Linux)
 Makefile
 	- only used to generate TeX output from the documentation.
-aztcd
-	- info on Aztech/Orchid/Okano/Wearnes/Conrad/CyCDROM driver.
 cdrom-standard.tex
 	- LaTeX document on standardizing the CD-ROM programming interface.
-cdu31a
-	- info on the Sony CDU31A/CDU33A CD-ROM driver.
-cm206
-	- info on the Philips/LMS cm206/cm260 CD-ROM driver.
-gscd
-	- info on the Goldstar R420 CD-ROM driver.
 ide-cd
 	- info on setting up and using ATAPI (aka IDE) CD-ROMs.
-isp16
-	- info on the CD-ROM interface on ISP16, MAD16 or Mozart sound card.
-mcd
-	- info on limitations of standard Mitsumi CD-ROM driver.
-mcdx
-	- info on improved Mitsumi CD-ROM driver.
-optcd
-	- info on the Optics Storage 8000 AT CD-ROM driver
 packet-writing.txt
 	- Info on the CDRW packet writing module
-sbpcd
-	- info on the SoundBlaster/Panasonic CD-ROM interface driver.
-sjcd
-	- info on the SANYO CDR-H94A CD-ROM interface driver.
-sonycd535
-	- info on the Sony CDU-535 (and 531) CD-ROM driver.
 
Documentation/cdrom/aztcd deleted +0 -822

822 lines not on this page · raw message

Documentation/cdrom/cdu31a deleted +0 -196

196 lines not on this page · raw message

Documentation/cdrom/cm206 deleted +0 -185

185 lines not on this page · raw message

Documentation/cdrom/gscd deleted +0 -60

60 lines not on this page · raw message

Documentation/cdrom/isp16 deleted +0 -100

100 lines not on this page · raw message

Documentation/cdrom/mcdx deleted +0 -29
@@ -1,29 +0,0 @@
-If you are using the driver as a module, you can specify your ports and IRQs
-like
-
- # insmod mcdx.o mcdx=0x300,11,0x304,5
-
-and so on ("address,IRQ" pairs).
-This will override the configuration in mcdx.h.
-
-This driver:
-
-    o   handles XA and (hopefully) multi session CDs as well as
-        ordinary CDs;
-    o   supports up to 5 drives (of course, you'll need free 
-        IRQs, i/o ports and slots);
-    o   plays audio
-
-This version doesn't support yet:
-
-    o   shared IRQs (but it seems to be possible - I've successfully
-                connected two drives to the same irq.  So it's `only' a 
-                problem of the driver.)
-
-This driver never will:
-
-    o   Read digital audio (i.e. copy directly), due to missing
-        hardware features. 
-
-
[email protected]
Documentation/cdrom/optcd deleted +0 -57

57 lines not on this page · raw message

Documentation/cdrom/sbpcd deleted +0 -1061

1,061 lines not on this page · raw message

Documentation/cdrom/sjcd deleted +0 -60

60 lines not on this page · raw message

Documentation/cdrom/sonycd535 deleted +0 -122

122 lines not on this page · raw message