Skip to contentSkip to conversation

Fix several memory leaks in cr_backlight_probe()

PATCH Superseded Jesper Juhl 1 participant 1 message Jul 20, 2007

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 Fix several memory leaks in cr_backlight_probe()

Hi,

After fixing the too small memory allocation in cr_backlight_probe() from drivers/video/backlight/cr_bllcd.c
(commit e3bbb3f05339de438faf54124f25c92e6fe4ac2e) I noticed that the Coverity checker also thought there were a few memory leaks in there. I took a closer look and confirmed that there were indeed several leaks.

At the start of the function we allocate storage for a 'struct cr_panel' and store the pointer in a variable named 'crp'.

Then we call pci_get_device() and pci_read_config_byte() and if either of them fail we return without freeing the memory allocated for the 'struct cr_panel'. These two leaks are easy to fix since we don't even use 'crp' for anything up to this point, so I simply moved the allocation further down in the function so it only happens just before we actually need it.

A bit further down we call backlight_device_register() and store the result in 'crp->cr_backlight_device'. In case of error we return 'crp->cr_backlight_device' from the function, thus leaking 'crp' itself. The same thing happens with the call to lcd_device_register(). To fix these two leaks I declare two new pointers to hold the return values, so that in case of error we can return the pointer (as before) but without leaking 'crp'.

Please consider merging.

Note: Due to lack of hardware the patch has only been compile tested.

---

 drivers/video/backlight/cr_bllcd.c |   30 +++++++++++++++---------------
 1 files changed, 15 insertions(+), 15 deletions(-)
drivers/video/backlight/cr_bllcd.c +15 -15
index 1b3f658..d526907 100644
@@ -171,13 +171,11 @@ static struct lcd_ops cr_lcd_ops = {
 
 static int cr_backlight_probe(struct platform_device *pdev)
 {
+	struct backlight_device *bdp;
+	struct lcd_device *ldp;
 	struct cr_panel *crp;
 	u8 dev_en;
 
-	crp = kzalloc(sizeof(*crp), GFP_KERNEL);
-	if (crp == NULL)
-		return -ENOMEM;
-
 	lpc_dev = pci_get_device(PCI_VENDOR_ID_INTEL,
 					CRVML_DEVICE_LPC, NULL);
 	if (!lpc_dev) {
@@ -193,27 +191,29 @@ static int cr_backlight_probe(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
-	crp->cr_backlight_device = backlight_device_register("cr-backlight",
-							     &pdev->dev, NULL,
-							     &cr_backlight_ops);
-	if (IS_ERR(crp->cr_backlight_device)) {
+	bdp = backlight_device_register("cr-backlight",
+					&pdev->dev, NULL,
+					&cr_backlight_ops);
+	if (IS_ERR(bdp)) {
 		pci_dev_put(lpc_dev);
-		return PTR_ERR(crp->cr_backlight_device);
+		return PTR_ERR(bdp);
 	}
 
-	crp->cr_lcd_device = lcd_device_register("cr-lcd",
-							&pdev->dev,
-							&cr_lcd_ops);
-
-	if (IS_ERR(crp->cr_lcd_device)) {
+	ldp = lcd_device_register("cr-lcd", &pdev->dev, &cr_lcd_ops);
+	if (IS_ERR(ldp)) {
 		pci_dev_put(lpc_dev);
-		return PTR_ERR(crp->cr_backlight_device);
+		return PTR_ERR(bdp);
 	}
 
 	pci_read_config_dword(lpc_dev, CRVML_REG_GPIOBAR,
 			      &gpio_bar);
 	gpio_bar &= ~0x3F;
 
+	crp = kzalloc(sizeof(*crp), GFP_KERNEL);
+	if (crp == NULL)
+		return -ENOMEM;
+	crp->cr_backlight_device = bdp;
+	crp->cr_lcd_device = ldp;
 	crp->cr_backlight_device->props.power = FB_BLANK_UNBLANK;
 	crp->cr_backlight_device->props.brightness = 0;
 	crp->cr_backlight_device->props.max_brightness = 0;