ide-pmac: PIO mode setup fixes (take 2)

* Add { 0, 0 } entry to {kauai,shasta}_pio_timings[] so kauai_lookup_timing() always returns a valid PIO timing (fixes PIO timing not being set for devices with minimum PIO cycle <= 120ns).

* Add setting transfer mode on the device to pmac_ide_set_pio_mode().

* Fix pmac_ide_set_pio() to always program chipset for given PIO timing instead of only when the device we want to program PIO timing for is the currently selected one.

* Now that pmac_ide_set_pio() is fixed there is no need to set transfer mode on the device and program chipset for PIO in pmac_ide_tune_chipset() (returning 0 == success is not entirely correct but is OK for now since the upper layers are only checking ->speedproc return value for DMA modes).

v2:
* s/speed/XFER_PIO_0 + pio/ in pmac_ide_set_pio_mode() so it actually compiles.

* Removal of kauai_lookup_timing() return value checking went to separate patch.

Signed-off-by Bartlomiej Zolnierkiewicz <[email protected]>

Cc Sergei Shtylyov <[email protected]>

---
replacement patch for the one in IDE quilt tree

 drivers/ide/ppc/pmac.c |   15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

Index: b/drivers/ide/ppc/pmac.c
===================================================================

drivers/ide/ppc/pmac.c +10 -5

@@ -6,6 +6,7 @@
  * for doing DMA.
  *
  *  Copyright (C) 1998-2003 Paul Mackerras & Ben. Herrenschmidt
+ *  Copyright (C)      2007 Bartlomiej Zolnierkiewicz
  *
  *  This program is free software; you can redistribute it and/or
  *  modify it under the terms of the GNU General Public License

@@ -311,7 +312,8 @@ static struct kauai_timing	kauai_pio_tim
 	{ 240	, 0x0800038b },
 	{ 239	, 0x0800030c },
 	{ 180	, 0x05000249 },
-	{ 120	, 0x04000148 }
+	{ 120	, 0x04000148 },
+	{ 0	, 0 },
 };
 
 static struct kauai_timing	kauai_mdma_timings[] =

@@ -351,7 +353,8 @@ static struct kauai_timing	shasta_pio_ti
 	{ 240	, 0x040003cd },
 	{ 239	, 0x040003cd },
 	{ 180	, 0x0400028b },
-	{ 120	, 0x0400010a }
+	{ 120	, 0x0400010a },
+	{ 0	, 0 },
 };
 
 static struct kauai_timing	shasta_mdma_timings[] =

@@ -695,8 +698,10 @@ pmac_ide_set_pio_mode(ide_drive_t *drive
 		drive->name, pio,  *timings);
 #endif	
 
-	if (drive->select.all == HWIF(drive)->INB(IDE_SELECT_REG))
-		pmac_ide_do_update_timings(drive);
+	if (pmac_ide_do_setfeature(drive, XFER_PIO + pio))
+		return;
+
+	pmac_ide_do_update_timings(drive);
 }
 
 #ifdef CONFIG_BLK_DEV_IDEDMA_PMAC

@@ -965,7 +970,7 @@ static int pmac_ide_tune_chipset(ide_dri
 		case XFER_PIO_1:
 		case XFER_PIO_0:
 			pmac_ide_set_pio_mode(drive, speed & 0x07);
-			break;
+			return 0;
 		default:
 			ret = 1;
 	}