ppc: remove APUS support
Subsystems (6)
RFC PATCH 1/1 ppc: remove APUS support
Current status of APUS:
- arch/powerpc/: removed in 2.6.23
- arch/ppc/: marked BROKEN since 2 years
This patch therefore removes the remaining parts of APUS support.
Signed-off-by Adrian Bunk <[email protected]>
---
This patch has been sent on:
- 1 Jul 2007
Due to a charset problem that might corrupt the patch (a comment contains a non UTF-8 character) the same patch is also attached compressed.
arch/m68k/amiga/chipram.c | 2 arch/powerpc/kernel/setup_32.c | 1 arch/ppc/Kconfig | 148 ---- arch/ppc/Makefile | 1 arch/ppc/amiga/Makefile | 8 arch/ppc/amiga/amiga_ksyms.c | 1 arch/ppc/amiga/amiints.c | 322 --------- arch/ppc/amiga/amisound.c | 1 arch/ppc/amiga/bootinfo.c | 78 -- arch/ppc/amiga/chipram.c | 1 arch/ppc/amiga/cia.c | 176 ----- arch/ppc/amiga/config.c | 953 ---------------------------- arch/ppc/amiga/ints.c | 158 ---- arch/ppc/amiga/pcmcia.c | 1 arch/ppc/amiga/time.c | 57 - arch/ppc/configs/apus_defconfig | 920 --------------------------- arch/ppc/kernel/head.S | 117 --- arch/ppc/kernel/ppc_ksyms.c | 3 arch/ppc/kernel/setup.c | 1 arch/ppc/mm/pgtable.c | 38 - arch/ppc/platforms/Makefile | 4 arch/ppc/platforms/apus_pci.c | 207 ------ arch/ppc/platforms/apus_pci.h | 34 arch/ppc/platforms/apus_setup.c | 798 ----------------------- drivers/ide/ide-probe.c | 8 drivers/isdn/hisax/avm_pci.c | 8 drivers/scsi/a2091.c | 3 drivers/scsi/a3000.c | 3 drivers/scsi/gvp11.c | 3 drivers/scsi/oktagon_esp.c | 2 drivers/scsi/oktagon_io.S | 72 -- drivers/video/console/fbcon.c | 2 drivers/video/console/fonts.c | 4 include/asm-m68k/pgtable.h | 2 include/asm-powerpc/ide.h | 2 include/asm-powerpc/reg.h | 4 include/asm-ppc/amigahw.h | 16 include/asm-ppc/amigaints.h | 133 --- include/asm-ppc/amigappc.h | 85 -- include/asm-ppc/bootinfo.h | 5 include/asm-ppc/io.h | 48 - include/asm-ppc/machdep.h | 4 include/asm-ppc/page.h | 44 - include/asm-ppc/pgtable.h | 8 sound/oss/dmasound/Kconfig | 2 sound/oss/dmasound/dmasound_paula.c | 4 46 files changed, 24 insertions(+), 4468 deletions(-)
arch/ppc/Kconfig renamed from arch/ppc/Kconfig.old +1 -147
@@ -573,24 +573,9 @@ choice Select PReP if configuring for a PReP machine. - Select Gemini if configuring for a Synergy Microsystems' Gemini - series Single Board Computer. More information is available at: - <http://www.synergymicro.com/PressRel/97_10_15.html>. - - Select APUS if configuring for a PowerUP Amiga. More information is - available at: <http://linux-apus.sourceforge.net/>. - config PPC_PREP bool "PReP" -config APUS - bool "Amiga-APUS" - depends on BROKEN - help - Select APUS if configuring for a PowerUP Amiga. - More information is available at: - <http://linux-apus.sourceforge.net/>. - config KATANA bool "Artesyn-Katana" help
@@ -1027,132 +1012,6 @@ config CMDLINE some command-line options at build time by entering them here. In most cases you will need to specify the root device here. -config AMIGA - bool - depends on APUS - default y - help - This option enables support for the Amiga series of computers. - -config ZORRO - bool - depends on APUS - default y - help - This enables support for the Zorro bus in the Amiga. If you have - expansion cards in your Amiga that conform to the Amiga - AutoConfig(tm) specification, say Y, otherwise N. Note that even - expansion cards that do not fit in the Zorro slots but fit in e.g. - the CPU slot may fall in this category, so you have to say Y to let - Linux use these. - -config ABSTRACT_CONSOLE - bool - depends on APUS - default y - -config APUS_FAST_EXCEPT - bool - depends on APUS - default y - -config AMIGA_PCMCIA - bool "Amiga 1200/600 PCMCIA support" - depends on APUS && EXPERIMENTAL - help - Include support in the kernel for pcmcia on Amiga 1200 and Amiga - 600. If you intend to use pcmcia cards say Y; otherwise say N. - -config AMIGA_BUILTIN_SERIAL - tristate "Amiga builtin serial support" - depends on APUS - help - If you want to use your Amiga's built-in serial port in Linux, - answer Y. - - To compile this driver as a module, choose M here. - -config GVPIOEXT - tristate "GVP IO-Extender support" - depends on APUS - help - If you want to use a GVP IO-Extender serial card in Linux, say Y. - Otherwise, say N. - -config GVPIOEXT_LP - tristate "GVP IO-Extender parallel printer support" - depends on GVPIOEXT - help - Say Y to enable driving a printer from the parallel port on your - GVP IO-Extender card, N otherwise. - -config GVPIOEXT_PLIP - tristate "GVP IO-Extender PLIP support" - depends on GVPIOEXT - help - Say Y to enable doing IP over the parallel port on your GVP - IO-Extender card, N otherwise. - -config MULTIFACE_III_TTY - tristate "Multiface Card III serial support" - depends on APUS - help - If you want to use a Multiface III card's serial port in Linux, - answer Y. - - To compile this driver as a module, choose M here. - -config A2232 - tristate "Commodore A2232 serial support (EXPERIMENTAL)" - depends on EXPERIMENTAL && APUS - ---help--- - This option supports the 2232 7-port serial card shipped with the - Amiga 2000 and other Zorro-bus machines, dating from 1989. At - a max of 19,200 bps, the ports are served by a 6551 ACIA UART chip - each, plus a 8520 CIA, and a master 6502 CPU and buffer as well. The - ports were connected with 8 pin DIN connectors on the card bracket, - for which 8 pin to DB25 adapters were supplied. The card also had - jumpers internally to toggle various pinning configurations. - - This driver can be built as a module; but then "generic_serial" - will also be built as a module. This has to be loaded before - "ser_a2232". If you want to do this, answer M here. - -config WHIPPET_SERIAL - tristate "Hisoft Whippet PCMCIA serial support" - depends on AMIGA_PCMCIA - help - HiSoft has a web page at <http://www.hisoft.co.uk/>, but there - is no listing for the Whippet in their Amiga section. - -config APNE - tristate "PCMCIA NE2000 support" - depends on AMIGA_PCMCIA - help - If you have a PCMCIA NE2000 compatible adapter, say Y. Otherwise, - say N. - - To compile this driver as a module, choose M here: the - module will be called apne. - -config SERIAL_CONSOLE - bool "Support for serial port console" - depends on APUS && (AMIGA_BUILTIN_SERIAL=y || GVPIOEXT=y || MULTIFACE_III_TTY=y) - -config HEARTBEAT - bool "Use power LED as a heartbeat" - depends on APUS - help - Use the power-on LED on your machine as a load meter. The exact - behavior is platform-dependent, but normally the flash frequency is - a hyperbolic function of the 5-minute load average. - -config PROC_HARDWARE - bool "/proc/hardware support" - depends on APUS - -source "drivers/zorro/Kconfig" - if !44x || BROKEN source kernel/power/Kconfig endif
@@ -1227,8 +1086,7 @@ config MCA config PCI bool "PCI support" if 40x || CPM2 || 83xx || 85xx || PPC_MPC52xx - default y if !40x && !CPM2 && !8xx && !APUS && !83xx && !85xx - default PCI_PERMEDIA if !4xx && !CPM2 && !8xx && APUS + default y if !40x && !CPM2 && !8xx && !83xx && !85xx default PCI_QSPAN if !4xx && !CPM2 && 8xx help Find out whether your system includes a PCI bus. PCI is the name of
@@ -1282,10 +1140,6 @@ config 8260_PCI9_IDMA4 endchoice -config PCI_PERMEDIA - bool "PCI for Permedia2" - depends on !4xx && !8xx && APUS - source "drivers/pci/Kconfig" source "drivers/pcmcia/Kconfig"
sound/oss/dmasound/Kconfig renamed from sound/oss/dmasound/Kconfig.old +1 -1
@@ -14,7 +14,7 @@ config DMASOUND_ATARI config DMASOUND_PAULA tristate "Amiga DMA sound support" - depends on (AMIGA || APUS) && SOUND + depends on AMIGA && SOUND select DMASOUND help If you want to use the internal audio of your Amiga in Linux, answer
arch/m68k/amiga/chipram.c renamed from arch/m68k/amiga/chipram.c.old +0 -2
@@ -29,12 +29,10 @@ void __init amiga_chip_init(void)if (!AMIGAHW_PRESENT (CHIP_RAM ))return ; -#ifndef CONFIG_APUS_FAST_EXCEPT /* * Remove the first 4 pages where PPC exception handlers will be located */ amiga_chip_size -=0x4000 ; -#endif chipram_res.end = amiga_chip_size-1 ;request_resource (&iomem_resource, &chipram_res);
arch/ppc/Makefile renamed from arch/ppc/Makefile.old +0 -1
@@ -69,7 +69,6 @@ core-$(CONFIG_83xx) += arch/ppc/platfor core-$(CONFIG_85xx) += arch/ppc/platforms/85xx/ core-$(CONFIG_MATH_EMULATION) += arch/powerpc/math-emu/ core-$(CONFIG_XMON) += arch/ppc/xmon/ -core-$(CONFIG_APUS) += arch/ppc/amiga/ drivers-$(CONFIG_8xx) += arch/ppc/8xx_io/ drivers-$(CONFIG_4xx) += arch/ppc/4xx_io/ drivers-$(CONFIG_CPM2) += arch/ppc/8260_io/
arch/ppc/kernel/head.S renamed from arch/ppc/kernel/head.S.old +4 -113
178 lines not on this page · raw message
arch/ppc/platforms/Makefile renamed from arch/ppc/platforms/Makefile.old +0 -4
@@ -2,10 +2,6 @@ # Makefile for the linux kernel. # -obj-$(CONFIG_APUS) += apus_setup.o -ifeq ($(CONFIG_APUS),y) -obj-$(CONFIG_PCI) += apus_pci.o -endif obj-$(CONFIG_PPC_PREP) += prep_pci.o prep_setup.o obj-$(CONFIG_PREP_RESIDUAL) += residual.o obj-$(CONFIG_PQ2ADS) += pq2ads.o
drivers/ide/ide-probe.c renamed from drivers/ide/ide-probe.c.old +4 -4
@@ -1096,9 +1096,9 @@ static int init_irq (ide_hwif_t *hwif)*/ if (!match || match->irq != hwif->irq) {int sa =IRQF_DISABLED ; -#if defined(__mc68000__) || defined(CONFIG_APUS ) +#if defined(__mc68000__) sa =IRQF_SHARED ; -#endif /* __mc68000__ || CONFIG_APUS */ +#endif /* __mc68000__ */ if (IDE_CHIPSET_IS_PCI (hwif->chipset)) { sa =IRQF_SHARED ;
@@ -1141,7 +1141,7 @@ static int init_irq (ide_hwif_t *hwif)spin_unlock_irq (&ide_lock); } -#if !defined(__mc68000__) && !defined(CONFIG_APUS ) +#if !defined(__mc68000__) printk("%s at 0x%03lx-0x%03lx,0x%03lx on irq %d", hwif->name, hwif->io_ports[IDE_DATA_OFFSET], hwif->io_ports[IDE_DATA_OFFSET]+7,
@@ -1149,7 +1149,7 @@ static int init_irq (ide_hwif_t *hwif)#else printk ("%s at 0x%08lx on irq %d" , hwif->name, hwif->io_ports[IDE_DATA_OFFSET ], hwif->irq); -#endif /* __mc68000__ && CONFIG_APUS */ +#endif /* __mc68000__ */ if (match)printk (" (%sed with %s)" , hwif->sharing_irq ?"shar" :"serializ" , match->name);
drivers/isdn/hisax/avm_pci.c renamed from drivers/isdn/hisax/avm_pci.c.old +0 -8
@@ -264,11 +264,7 @@ hdlc_empty_fifo(struct BCState *bcs, intoutl (idx, cs->hw.avm.cfg_reg +4 );while (cnt < count) {#ifdef __powerpc__ -#ifdef CONFIG_APUS - *ptr++ =in_le32 ((unsigned *)(cs->hw.avm.isac +_IO_BASE)); -#else *ptr++ =in_be32 ((unsigned *)(cs->hw.avm.isac +_IO_BASE)); -#endif /* CONFIG_APUS */ #else *ptr++ =inl (cs->hw.avm.isac);#endif /* __powerpc__ */
@@ -329,11 +325,7 @@ hdlc_fill_fifo(struct BCState *bcs)if (cs->subtyp ==AVM_FRITZ_PCI ) {while (cnt<count) {#ifdef __powerpc__ -#ifdef CONFIG_APUS -out_le32 ((unsigned *)(cs->hw.avm.isac +_IO_BASE), *ptr++); -#else out_be32 ((unsigned *)(cs->hw.avm.isac +_IO_BASE), *ptr++); -#endif /* CONFIG_APUS */ #else outl (*ptr++, cs->hw.avm.isac);#endif /* __powerpc__ */
drivers/scsi/oktagon_esp.c renamed from drivers/scsi/oktagon_esp.c.old +1 -1
@@ -7,7 +7,7 @@*/ -#if defined(CONFIG_AMIGA ) || defined(CONFIG_APUS ) +#if defined(CONFIG_AMIGA )#define USE_BOTTOM_HALF #endif
drivers/scsi/oktagon_io.S renamed from drivers/scsi/oktagon_io.S.old +0 -72
81 lines not on this page · raw message
drivers/video/console/fbcon.c renamed from drivers/video/console/fbcon.c.old +1 -1
@@ -85,7 +85,7 @@#ifdef CONFIG_MAC #include <asm/macints.h> #endif -#if defined(__mc68000__) || defined(CONFIG_APUS ) +#if defined(__mc68000__)#include <asm/machdep.h> #include <asm/setup.h> #endif
drivers/video/console/fonts.c renamed from drivers/video/console/fonts.c.old +2 -2
@@ -15,7 +15,7 @@#include <linux/module.h> #include <linux/types.h> #include <linux/string.h> -#if defined(__mc68000__) || defined(CONFIG_APUS ) +#if defined(__mc68000__)#include <asm/setup.h> #endif #include <linux/font.h>
@@ -120,7 +120,7 @@ const struct font_desc *get_default_fontfor (i=0 ; i<num_fonts; i++) { f = fonts[i]; c = f->pref; -#if defined(__mc68000__) || defined(CONFIG_APUS ) +#if defined(__mc68000__)#ifdef CONFIG_FONT_PEARL_8x8if (MACH_IS_AMIGA && f->idx == PEARL8x8_IDX) c =100 ;
include/asm-powerpc/ide.h renamed from include/asm-powerpc/ide.h.old +1 -1
@@ -67,7 +67,7 @@ static __inline__ unsigned long ide_defa#define ide_init_default_irq (base) ide_default_irq(base)#endif -#if (definedCONFIG_APUS || defined CONFIG_BLK_DEV_MPC8xx_IDE ) +#ifdef CONFIG_BLK_DEV_MPC8xx_IDE#define IDE_ARCH_ACK_INTR 1#define ide_ack_intr (hwif) (hwif->hw.ack_intr ? hwif->hw.ack_intr(hwif) : 1)#endif
include/asm-powerpc/reg.h renamed from include/asm-powerpc/reg.h.old +0 -4
@@ -102,12 +102,8 @@#else /* 32-bit */ /* Default MSR for kernel mode. */ #ifndef MSR_KERNEL /* reg_booke.h also defines this */ -#ifdef CONFIG_APUS_FAST_EXCEPT -#define MSR_KERNEL (MSR_ME|MSR_IP|MSR_RI|MSR_IR|MSR_DR) -#else #define MSR_KERNEL (MSR_ME|MSR_RI|MSR_IR|MSR_DR)#endif -#endif #define MSR_USER (MSR_KERNEL|MSR_PR|MSR_EE)#endif
include/asm-ppc/bootinfo.h renamed from include/asm-ppc/bootinfo.h.old +0 -5
@@ -11,10 +11,6 @@#include <asm/page.h> -#if defined(CONFIG_APUS) && !defined(__BOOTER__) -#include <asm-m68k/bootinfo.h> -#else -struct bi_record {unsigned long tag;/* tag ID */ unsigned long size;/* size of record (in bytes) */
@@ -44,7 +40,6 @@ bootinfo_addr(unsigned long offset)return (struct bi_record *)_ALIGN ((offset) + (1 <<20 ) -1 , (1 << 20)); } -#endif /* CONFIG_APUS */ #endif /* _PPC_BOOTINFO_H */
include/asm-ppc/io.h renamed from include/asm-ppc/io.h.old +4 -44
106 lines not on this page · raw message
include/asm-ppc/machdep.h renamed from include/asm-ppc/machdep.h.old +0 -4
@@ -8,10 +8,6 @@#include <asm/setup.h> #include <asm/page.h> -#ifdef CONFIG_APUS -#include <asm-m68k/machdep.h> -#endif -struct pt_regs ;struct pci_bus ;struct pci_dev ;
include/asm-ppc/page.h renamed from include/asm-ppc/page.h.old +2 -42
64 lines not on this page · raw message
include/asm-ppc/pgtable.h renamed from include/asm-ppc/pgtable.h.old +0 -8
@@ -772,14 +772,6 @@ extern void paging_init(void);#define pte_to_pgoff (pte) (pte_val(pte) >> 3)#define pgoff_to_pte (off) ((pte_t) { ((off) << 3) | _PAGE_FILE }) -/* CONFIG_APUS */ -/* For virtual address to physical address conversion */ -extern void cache_clear (__u32 addr,int length); -extern void cache_push (__u32 addr,int length); -extern int mm_end_of_chunk (unsigned long addr,int len); -extern unsigned long iopa (unsigned long addr); -extern unsigned long mm_ptov(unsigned long addr) __attribute_const__; -/* Values for nocacheflag and cmode */ /* These are not used by the APUS kernel_map, but prevents compilation errors. */
include/asm-m68k/pgtable.h renamed from include/asm-m68k/pgtable.h.old +0 -2
@@ -107,8 +107,6 @@ extern void *empty_zero_page;/* 64-bit machines, beware! SRB. */ #define SIZEOF_PTR_LOG2 2 -#define mm_end_of_chunk (addr, len) 0 -extern void kernel_set_cachemode (void *addr,unsigned long size,int cmode);/*
drivers/scsi/a2091.c renamed from drivers/scsi/a2091.c.old +1 -2
@@ -46,8 +46,7 @@ static int dma_setup(struct scsi_cmnd *cstruct Scsi_Host *instance = cmd->device->host;/* don't allow DMA if the physical address is bad */ -if (addr &A2091_XFER_MASK || - (!dir_in &&mm_end_of_chunk (addr, cmd->SCp.this_residual))) +if (addr &A2091_XFER_MASK ) {HDATA (instance)->dma_bounce_len = (cmd->SCp.this_residual +511 ) & ~0x1ff ;
drivers/scsi/a3000.c renamed from drivers/scsi/a3000.c.old +1 -2
@@ -54,8 +54,7 @@ static int dma_setup(struct scsi_cmnd *c* end of a physical memory chunk, then allocate a bounce * buffer */ -if (addr &A3000_XFER_MASK || - (!dir_in &&mm_end_of_chunk (addr, cmd->SCp.this_residual))) +if (addr &A3000_XFER_MASK ) {HDATA (a3000_host)->dma_bounce_len = (cmd->SCp.this_residual +511 ) & ~0x1ff ;
drivers/scsi/gvp11.c renamed from drivers/scsi/gvp11.c.old +1 -2
@@ -54,8 +54,7 @@ static int dma_setup(struct scsi_cmnd *cstatic int scsi_alloc_out_of_range =0 ;/* use bounce buffer if the physical address is bad */ -if (addr &HDATA (cmd->device->host)->dma_xfer_mask || - (!dir_in &&mm_end_of_chunk (addr, cmd->SCp.this_residual))) +if (addr &HDATA (cmd->device->host)->dma_xfer_mask) {HDATA (cmd->device->host)->dma_bounce_len = (cmd->SCp.this_residual +511 ) & ~0x1ff ;
sound/oss/dmasound/dmasound_paula.c renamed from sound/oss/dmasound/dmasound_paula.c.old +0 -4
@@ -91,10 +91,6 @@ static irqreturn_t AmiInterrupt(int irq,* power LED are controlled by the same line. */ -#ifdef CONFIG_APUS -#define mach_heartbeat ppc_md.heartbeat -#endif -static void (*saved_heartbeat)(int ) =NULL ;static inline void disable_heartbeat (void )
arch/powerpc/kernel/setup_32.c renamed from arch/powerpc/kernel/setup_32.c.old +0 -1
@@ -24,7 +24,6 @@#include <asm/processor.h> #include <asm/pgtable.h> #include <asm/setup.h> -#include <asm/amigappc.h> #include <asm/smp.h> #include <asm/elf.h> #include <asm/cputable.h>
arch/ppc/kernel/setup.c renamed from arch/ppc/kernel/setup.c.old +0 -1
@@ -25,7 +25,6 @@#include <asm/pgtable.h> #include <asm/bootinfo.h> #include <asm/setup.h> -#include <asm/amigappc.h> #include <asm/smp.h> #include <asm/elf.h> #include <asm/cputable.h>
arch/ppc/kernel/ppc_ksyms.c renamed from arch/ppc/kernel/ppc_ksyms.c.old +0 -3
@@ -60,6 +60,4 @@long long __lshrdi3 (long long ,int ); -extern unsigned long mm_ptov (unsigned long paddr); -EXPORT_SYMBOL (clear_pages);EXPORT_SYMBOL (clear_user_page);
@@ -119,7 +117,6 @@ EXPORT_SYMBOL(_outsw_ns);EXPORT_SYMBOL (_insl_ns);EXPORT_SYMBOL (_outsl_ns);EXPORT_SYMBOL (iopa); -EXPORT_SYMBOL (mm_ptov);EXPORT_SYMBOL (ioremap);#ifdef CONFIG_44xEXPORT_SYMBOL (ioremap64);
arch/ppc/mm/pgtable.c renamed from arch/ppc/mm/pgtable.c.old +0 -38
@@ -426,41 +426,3 @@ unsigned long iopa(unsigned long addr)return (pa); } -/* This is will find the virtual address for a physical one.... -* Swiped from APUS, could be dangerous :-). -* This is only a placeholder until I really find a way to make this -* work. -- Dan -*/ -unsigned long -mm_ptov (unsigned long paddr) -{ -unsigned long ret; -#if 0 -if (paddr <16 *1024 *1024 ) - ret =ZTWO_VADDR (paddr); -else { -int i; - -for (i =0 ; i < kmap_chunk_count;){ -unsigned long phys = kmap_chunks[i++]; -unsigned long size = kmap_chunks[i++]; -unsigned long virt = kmap_chunks[i++]; -if (paddr >= phys - && paddr < (phys + size)){ - ret = virt + paddr - phys; - goto exit; - } - } - - ret = (unsigned long )__va (paddr); - } -exit: -#ifdef DEBUGPV -printk ("PTOV(%lx)=%lx\n" , paddr, ret); -#endif -#else - ret = (unsigned long )paddr +KERNELBASE ; -#endif -return ret; -} -
arch/ppc/amiga/amiga_ksyms.c deleted +0 -1
@@ -1 +0,0 @@ -#include "../../m68k/amiga/amiga_ksyms.c"
arch/ppc/amiga/chipram.c deleted +0 -1
@@ -1 +0,0 @@ -#include "../../m68k/amiga/chipram.c"
arch/ppc/amiga/Makefile deleted +0 -8
@@ -1,8 +0,0 @@ -# -# Makefile for Linux arch/m68k/amiga source directory -# - -obj-y := config.o amiints.o cia.o time.o bootinfo.o amisound.o \ - chipram.o amiga_ksyms.o - -obj-$(CONFIG_AMIGA_PCMCIA) += pcmcia.o
arch/ppc/amiga/amiints.c deleted +0 -322
322 lines not on this page · raw message
arch/ppc/amiga/cia.c deleted +0 -176
176 lines not on this page · raw message
arch/ppc/amiga/pcmcia.c deleted +0 -1
@@ -1 +0,0 @@ -#include "../../m68k/amiga/pcmcia.c"
arch/ppc/amiga/amisound.c deleted +0 -1
@@ -1 +0,0 @@ -#include "../../m68k/amiga/amisound.c"
arch/ppc/amiga/time.c deleted +0 -57
57 lines not on this page · raw message
arch/ppc/amiga/bootinfo.c deleted +0 -78
78 lines not on this page · raw message
arch/ppc/amiga/ints.c deleted +0 -158
158 lines not on this page · raw message
arch/ppc/configs/apus_defconfig deleted +0 -920
920 lines not on this page · raw message
arch/ppc/platforms/apus_pci.h deleted +0 -34
@@ -1,34 +0,0 @@ -/* -* Phase5 CybervisionPPC (TVP4020) definitions for the Permedia2 framebuffer -* driver. -* -* Copyright (c) 1998-1999 Ilario Nardinocchi ([email protected]) -* -------------------------------------------------------------------------- -* This file is subject to the terms and conditions of the GNU General Public -* License. See the file README.legal in the main directory of this archive -* for more details. -*/ - -#ifndef APUS_PCI_H -#define APUS_PCI_H - - -#define CSPPC_PCI_BRIDGE 0xfffe0000 -#define CSPPC_BRIDGE_ENDIAN 0x0000 -#define CSPPC_BRIDGE_INT 0x0010 - -#define CVPPC_PCI_CONFIG 0xfffc0000 -#define CVPPC_ROM_ADDRESS 0xe2000001 -#define CVPPC_REGS_REGION 0xef000000 -#define CVPPC_FB_APERTURE_ONE 0xe0000000 -#define CVPPC_FB_APERTURE_TWO 0xe1000000 -#define CVPPC_FB_SIZE 0x00800000 - -/* CVPPC_BRIDGE_ENDIAN */ -#define CSPPCF_BRIDGE_BIG_ENDIAN 0x02 - -/* CVPPC_BRIDGE_INT */ -#define CSPPCF_BRIDGE_ACTIVE_INT2 0x01 - - -#endif /* APUS_PCI_H */
include/asm-ppc/amigahw.h deleted +0 -16
@@ -1,16 +0,0 @@ -#ifdef __KERNEL__ -#ifndef __ASMPPC_AMIGAHW_H -#define __ASMPPC_AMIGAHW_H - -#include <asm-m68k/amigahw.h> - -#undef CHIP_PHYSADDR -#ifdef CONFIG_APUS_FAST_EXCEPT -#define CHIP_PHYSADDR (0x000000) -#else -#define CHIP_PHYSADDR (0x004000) -#endif - - -#endif /* __ASMPPC_AMIGAHW_H */ -#endif /* __KERNEL__ */
include/asm-ppc/amigaints.h deleted +0 -133
133 lines not on this page · raw message
include/asm-ppc/amigappc.h deleted +0 -85
85 lines not on this page · raw message
arch/ppc/amiga/config.c deleted +0 -953
113 lines not on this page · raw message
arch/ppc/platforms/apus_setup.c deleted +0 -798
798 lines not on this page · raw message
arch/ppc/platforms/apus_pci.c deleted +0 -207
207 lines not on this page · raw message
The rest of this diff is not shown. View the raw message.
Part of the diff is not shown here. View the raw message.