Skip to contentSkip to conversation

UML - Console subsystem tidying

PATCH New Jeff Dike 1 participant 1 message Jul 30, 2007 User-mode Linux (UML)

lore
Share & tools
lore

Jeff Dike

author
#0 lore raw

PATCH 4/4 UML - Console subsystem tidying

This does a lot of cleanup on the UML console system. This patch should be entirely non-functional.

The tidying is as follows:
header cleanups - the includes should be closer to minimal and complete all printks now have a severity
lots of style fixes
fd_close is restructured a little in order to reduce the nesting some functions were calling the os_* wrappers when they can
call libc directly
port_accept had a unnecessary variable
it also tested a pid unecessarily before killing it
some functions were made static
xterm_free is gone, as it was identical to generic_free

--

 arch/um/drivers/chan_kern.c |  160 ++++++++++++++++++++++----------------------
 arch/um/drivers/chan_user.c |  113 ++++++++++++++++---------------
 arch/um/drivers/fd.c        |   74 +++++++++-----------
 arch/um/drivers/null.c      |   28 +++----
 arch/um/drivers/port_kern.c |   82 ++++++++++------------
 arch/um/drivers/port_user.c |   73 +++++++++-----------
 arch/um/drivers/pty.c       |   14 ++-
 arch/um/drivers/tty.c       |   37 ++++++----
 arch/um/drivers/xterm.c     |   16 +---
 9 files changed, 297 insertions(+), 300 deletions(-)
arch/um/drivers/chan_kern.c +80 -80
Index: linux-2.6.21-mm/arch/um/drivers/chan_kern.c
===================================================================
@@ -1,28 +1,19 @@
 /*
- * Copyright (C) 2000, 2001, 2002 Jeff Dike ([email protected])
+ * Copyright (C) 2000 - 2007 Jeff Dike (jdike@{linux.intel,addtoit}.com)
  * Licensed under the GPL
  */
 
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
 #include <linux/slab.h>
 #include <linux/tty.h>
-#include <linux/string.h>
 #include <linux/tty_flip.h>
-#include <asm/irq.h>
 #include "chan_kern.h"
-#include "kern.h"
-#include "irq_user.h"
-#include "sigio.h"
-#include "line.h"
 #include "os.h"
 
 #ifdef CONFIG_NOCONFIG_CHAN
 static void *not_configged_init(char *str, int device,
 				const struct chan_opts *opts)
 {
-	printk("Using a channel type which is configured out of "
+	printk(KERN_ERR "Using a channel type which is configured out of "
 	       "UML\n");
 	return NULL;
 }
@@ -30,34 +21,34 @@ static void *not_configged_init(char *st
 static int not_configged_open(int input, int output, int primary, void *data,
 			      char **dev_out)
 {
-	printk("Using a channel type which is configured out of "
+	printk(KERN_ERR "Using a channel type which is configured out of "
 	       "UML\n");
 	return -ENODEV;
 }
 
 static void not_configged_close(int fd, void *data)
 {
-	printk("Using a channel type which is configured out of "
+	printk(KERN_ERR "Using a channel type which is configured out of "
 	       "UML\n");
 }
 
 static int not_configged_read(int fd, char *c_out, void *data)
 {
-	printk("Using a channel type which is configured out of "
+	printk(KERN_ERR "Using a channel type which is configured out of "
 	       "UML\n");
 	return -EIO;
 }
 
 static int not_configged_write(int fd, const char *buf, int len, void *data)
 {
-	printk("Using a channel type which is configured out of "
+	printk(KERN_ERR "Using a channel type which is configured out of "
 	       "UML\n");
 	return -EIO;
 }
 
 static int not_configged_console_write(int fd, const char *buf, int len)
 {
-	printk("Using a channel type which is configured out of "
+	printk(KERN_ERR "Using a channel type which is configured out of "
 	       "UML\n");
 	return -EIO;
 }
@@ -65,14 +56,14 @@ static int not_configged_console_write(i
 static int not_configged_window_size(int fd, void *data, unsigned short *rows,
 				     unsigned short *cols)
 {
-	printk("Using a channel type which is configured out of "
+	printk(KERN_ERR "Using a channel type which is configured out of "
 	       "UML\n");
 	return -ENODEV;
 }
 
 static void not_configged_free(void *data)
 {
-	printk("Using a channel type which is configured out of "
+	printk(KERN_ERR "Using a channel type which is configured out of "
 	       "UML\n");
 }
 
@@ -91,14 +82,15 @@ static const struct chan_ops not_configg
 
 static void tty_receive_char(struct tty_struct *tty, char ch)
 {
-	if(tty == NULL) return;
+	if (tty == NULL)
+		return;
 
-	if(I_IXON(tty) && !I_IXOFF(tty) && !tty->raw) {
-		if(ch == STOP_CHAR(tty)){
+	if (I_IXON(tty) && !I_IXOFF(tty) && !tty->raw) {
+		if (ch == STOP_CHAR(tty)) {
 			stop_tty(tty);
 			return;
 		}
-		else if(ch == START_CHAR(tty)){
+		else if (ch == START_CHAR(tty)) {
 			start_tty(tty);
 			return;
 		}
@@ -111,14 +103,14 @@ static int open_one_chan(struct chan *ch
 {
 	int fd, err;
 
-	if(chan->opened)
+	if (chan->opened)
 		return 0;
 
-	if(chan->ops->open == NULL)
+	if (chan->ops->open == NULL)
 		fd = 0;
 	else fd = (*chan->ops->open)(chan->input, chan->output, chan->primary,
 				     chan->data, &chan->dev);
-	if(fd < 0)
+	if (fd < 0)
 		return fd;
 
 	err = os_set_fd_block(fd, 0);
@@ -139,10 +131,10 @@ int open_chan(struct list_head *chans)
 	struct chan *chan;
 	int ret, err = 0;
 
-	list_for_each(ele, chans){
+	list_for_each(ele, chans) {
 		chan = list_entry(ele, struct chan, list);
 		ret = open_one_chan(chan);
-		if(chan->primary)
+		if (chan->primary)
 			err = ret;
 	}
 	return err;
@@ -153,9 +145,9 @@ void chan_enable_winch(struct list_head 
 	struct list_head *ele;
 	struct chan *chan;
 
-	list_for_each(ele, chans){
+	list_for_each(ele, chans) {
 		chan = list_entry(ele, struct chan, list);
-		if(chan->primary && chan->output && chan->ops->winch){
+		if (chan->primary && chan->output && chan->ops->winch) {
 			register_winch(chan->fd, tty);
 			return;
 		}
@@ -168,7 +160,7 @@ int enable_chan(struct line *line)
 	struct chan *chan;
 	int err;
 
-	list_for_each(ele, &line->chan_list){
+	list_for_each(ele, &line->chan_list) {
 		chan = list_entry(ele, struct chan, list);
 		err = open_one_chan(chan);
 		if (err) {
@@ -178,7 +170,7 @@ int enable_chan(struct line *line)
 			continue;
 		}
 
-		if(chan->enabled)
+		if (chan->enabled)
 			continue;
 		err = line_setup_irq(chan->fd, chan->input, chan->output, line,
 				     chan);
@@ -215,12 +207,12 @@ void free_irqs(void)
 	list_splice_init(&irqs_to_free, &list);
 	spin_unlock_irqrestore(&irqs_to_free_lock, flags);
 
-	list_for_each(ele, &list){
+	list_for_each(ele, &list) {
 		chan = list_entry(ele, struct chan, free_list);
 
-		if(chan->input)
+		if (chan->input)
 			free_irq(chan->line->driver->read_irq, chan);
-		if(chan->output)
+		if (chan->output)
 			free_irq(chan->line->driver->write_irq, chan);
 		chan->enabled = 0;
 	}
@@ -230,22 +222,22 @@ static void close_one_chan(struct chan *
 {
 	unsigned long flags;
 
-	if(!chan->opened)
+	if (!chan->opened)
 		return;
 
-	if(delay_free_irq){
+	if (delay_free_irq) {
 		spin_lock_irqsave(&irqs_to_free_lock, flags);
 		list_add(&chan->free_list, &irqs_to_free);
 		spin_unlock_irqrestore(&irqs_to_free_lock, flags);
 	}
 	else {
-		if(chan->input)
+		if (chan->input)
 			free_irq(chan->line->driver->read_irq, chan);
-		if(chan->output)
+		if (chan->output)
 			free_irq(chan->line->driver->write_irq, chan);
 		chan->enabled = 0;
 	}
-	if(chan->ops->close != NULL)
+	if (chan->ops->close != NULL)
 		(*chan->ops->close)(chan->fd, chan->data);
 
 	chan->opened = 0;
@@ -274,7 +266,7 @@ void deactivate_chan(struct list_head *c
 	list_for_each(ele, chans) {
 		chan = list_entry(ele, struct chan, list);
 
-		if(chan->enabled && chan->input)
+		if (chan->enabled && chan->input)
 			deactivate_fd(chan->fd, irq);
 	}
 }
@@ -287,7 +279,7 @@ void reactivate_chan(struct list_head *c
 	list_for_each(ele, chans) {
 		chan = list_entry(ele, struct chan, list);
 
-		if(chan->enabled && chan->input)
+		if (chan->enabled && chan->input)
 			reactivate_fd(chan->fd, irq);
 	}
 }
@@ -303,6 +295,7 @@ int write_chan(struct list_head *chans, 
 		chan = list_entry(ele, struct chan, list);
 		if (!chan->output || (chan->ops->write == NULL))
 			continue;
+
 		n = chan->ops->write(chan->fd, buf, len, chan->data);
 		if (chan->primary) {
 			ret = n;
@@ -319,12 +312,14 @@ int console_write_chan(struct list_head 
 	struct chan *chan;
 	int n, ret = 0;
 
-	list_for_each(ele, chans){
+	list_for_each(ele, chans) {
 		chan = list_entry(ele, struct chan, list);
-		if(!chan->output || (chan->ops->console_write == NULL))
+		if (!chan->output || (chan->ops->console_write == NULL))
 			continue;
+
 		n = chan->ops->console_write(chan->fd, buf, len);
-		if(chan->primary) ret = n;
+		if (chan->primary)
+			ret = n;
 	}
 	return ret;
 }
@@ -334,10 +329,11 @@ int console_open_chan(struct line *line,
 	int err;
 
 	err = open_chan(&line->chan_list);
-	if(err)
+	if (err)
 		return err;
 
-	printk("Console initialized on /dev/%s%d\n", co->name, co->index);
+	printk(KERN_INFO "Console initialized on /dev/%s%d\n", co->name,
+	       co->index);
 	return 0;
 }
 
@@ -347,10 +343,10 @@ int chan_window_size(struct list_head *c
 	struct list_head *ele;
 	struct chan *chan;
 
-	list_for_each(ele, chans){
+	list_for_each(ele, chans) {
 		chan = list_entry(ele, struct chan, list);
-		if(chan->primary){
-			if(chan->ops->window_size == NULL)
+		if (chan->primary) {
+			if (chan->ops->window_size == NULL)
 				return 0;
 			return chan->ops->window_size(chan->fd, chan->data,
 						      rows_out, cols_out);
@@ -365,10 +361,11 @@ static void free_one_chan(struct chan *c
 
 	close_one_chan(chan, delay_free_irq);
 
-	if(chan->ops->free != NULL)
+	if (chan->ops->free != NULL)
 		(*chan->ops->free)(chan->data);
 
-	if(chan->primary && chan->output) ignore_sigio_fd(chan->fd);
+	if (chan->primary && chan->output)
+		ignore_sigio_fd(chan->fd);
 	kfree(chan);
 }
 
@@ -377,7 +374,7 @@ static void free_chan(struct list_head *
 	struct list_head *ele, *next;
 	struct chan *chan;
 
-	list_for_each_safe(ele, next, chans){
+	list_for_each_safe(ele, next, chans) {
 		chan = list_entry(ele, struct chan, list);
 		free_one_chan(chan, delay_free_irq);
 	}
@@ -388,14 +385,14 @@ static int one_chan_config_string(struct
 {
 	int n = 0;
 
-	if(chan == NULL){
+	if (chan == NULL) {
 		CONFIG_CHUNK(str, size, n, "none", 1);
 		return n;
 	}
 
 	CONFIG_CHUNK(str, size, n, chan->ops->type, 0);
 
-	if(chan->dev == NULL){
+	if (chan->dev == NULL) {
 		CONFIG_CHUNK(str, size, n, "", 1);
 		return n;
 	}
@@ -415,7 +412,7 @@ static int chan_pair_config_string(struc
 	str += n;
 	size -= n;
 
-	if(in == out){
+	if (in == out) {
 		CONFIG_CHUNK(str, size, n, "", 1);
 		return n;
 	}
@@ -435,13 +432,13 @@ int chan_config_string(struct list_head 
 	struct list_head *ele;
 	struct chan *chan, *in = NULL, *out = NULL;
 
-	list_for_each(ele, chans){
+	list_for_each(ele, chans) {
 		chan = list_entry(ele, struct chan, list);
-		if(!chan->primary)
+		if (!chan->primary)
 			continue;
-		if(chan->input)
+		if (chan->input)
 			in = chan;
-		if(chan->output)
+		if (chan->output)
 			out = chan;
 	}
 
@@ -500,27 +497,27 @@ static struct chan *parse_chan(struct li
 
 	ops = NULL;
 	data = NULL;
-	for(i = 0; i < ARRAY_SIZE(chan_table); i++){
+	for(i = 0; i < ARRAY_SIZE(chan_table); i++) {
 		entry = &chan_table[i];
-		if(!strncmp(str, entry->key, strlen(entry->key))){
+		if (!strncmp(str, entry->key, strlen(entry->key))) {
 			ops = entry->ops;
 			str += strlen(entry->key);
 			break;
 		}
 	}
-	if(ops == NULL){
+	if (ops == NULL) {
 		*error_out = "No match for configured backends";
 		return NULL;
 	}
 
 	data = (*ops->init)(str, device, opts);
-	if(data == NULL){
+	if (data == NULL) {
 		*error_out = "Configuration failed";
 		return NULL;
 	}
 
 	chan = kmalloc(sizeof(*chan), GFP_ATOMIC);
-	if(chan == NULL){
+	if (chan == NULL) {
 		*error_out = "Memory allocation failed";
 		return NULL;
 	}
@@ -546,26 +543,26 @@ int parse_chan_pair(char *str, struct li
 	struct chan *new, *chan;
 	char *in, *out;
 
-	if(!list_empty(chans)){
+	if (!list_empty(chans)) {
 		chan = list_entry(chans->next, struct chan, list);
 		free_chan(chans, 0);
 		INIT_LIST_HEAD(chans);
 	}
 
 	out = strchr(str, ',');
-	if(out != NULL){
+	if (out != NULL) {
 		in = str;
 		*out = '\0';
 		out++;
 		new = parse_chan(line, in, device, opts, error_out);
-		if(new == NULL)
+		if (new == NULL)
 			return -1;
 
 		new->input = 1;
 		list_add(&new->list, chans);
 
 		new = parse_chan(line, out, device, opts, error_out);
-		if(new == NULL)
+		if (new == NULL)
 			return -1;
 
 		list_add(&new->list, chans);
@@ -573,7 +570,7 @@ int parse_chan_pair(char *str, struct li
 	}
 	else {
 		new = parse_chan(line, str, device, opts, error_out);
-		if(new == NULL)
+		if (new == NULL)
 			return -1;
 
 		list_add(&new->list, chans);
@@ -588,9 +585,9 @@ int chan_out_fd(struct list_head *chans)
 	struct list_head *ele;
 	struct chan *chan;
 
-	list_for_each(ele, chans){
+	list_for_each(ele, chans) {
 		chan = list_entry(ele, struct chan, list);
-		if(chan->primary && chan->output)
+		if (chan->primary && chan->output)
 			return chan->fd;
 	}
 	return -1;
@@ -604,23 +601,25 @@ void chan_interrupt(struct list_head *ch
 	int err;
 	char c;
 
-	list_for_each_safe(ele, next, chans){
+	list_for_each_safe(ele, next, chans) {
 		chan = list_entry(ele, struct chan, list);
-		if(!chan->input || (chan->ops->read == NULL)) continue;
+		if (!chan->input || (chan->ops->read == NULL))
+			continue;
 		do {
 			if (tty && !tty_buffer_request_room(tty, 1)) {
 				schedule_delayed_work(task, 1);
 				goto out;
 			}
 			err = chan->ops->read(chan->fd, &c, chan->data);
-			if(err > 0)
+			if (err > 0)
 				tty_receive_char(tty, c);
-		} while(err > 0);
+		} while (err > 0);
 
-		if(err == 0) reactivate_fd(chan->fd, irq);
-		if(err == -EIO){
-			if(chan->primary){
-				if(tty != NULL)
+		if (err == 0)
+			reactivate_fd(chan->fd, irq);
+		if (err == -EIO) {
+			if (chan->primary) {
+				if (tty != NULL)
 					tty_hangup(tty);
 				close_chan(chans, 1);
 				return;
@@ -629,5 +628,6 @@ void chan_interrupt(struct list_head *ch
 		}
 	}
  out:
-	if(tty) tty_flip_buffer_push(tty);
+	if (tty)
+		tty_flip_buffer_push(tty);
 }
arch/um/drivers/fd.c +35 -39

119 lines not on this page · raw message

arch/um/drivers/null.c +11 -17
Index: linux-2.6.21-mm/arch/um/drivers/null.c
===================================================================
@@ -1,31 +1,36 @@
 /* 
- * Copyright (C) 2002 Jeff Dike ([email protected])
+ * Copyright (C) 2002 - 2007 Jeff Dike (jdike@{linux.intel,addtoit}.com)
  * Licensed under the GPL
  */
 
-#include <stdlib.h>
+#include <stddef.h>
 #include <errno.h>
-#include "chan_user.h"
+#include <fcntl.h>
 #include "os.h"
+#include "chan_user.h"
 
 /* This address is used only as a unique identifer */
 static int null_chan;
 
 static void *null_init(char *str, int device, const struct chan_opts *opts)
 {
-	return(&null_chan);
+	return &null_chan;
 }
 
 static int null_open(int input, int output, int primary, void *d,
 		     char **dev_out)
 {
+	int fd;
+
 	*dev_out = NULL;
-	return(os_open_file(DEV_NULL, of_rdwr(OPENFLAGS()), 0));
+
+	fd = open(DEV_NULL, O_RDWR);
+	return (fd < 0) ? -errno : fd;
 }
 
 static int null_read(int fd, char *c_out, void *unused)
 {
-	return(-ENODEV);
+	return -ENODEV;
 }
 
 static void null_free(void *data)
@@ -44,14 +49,3 @@ const struct chan_ops null_ops = {
 	.free		= null_free,
 	.winch		= 0,
 };
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only.  This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
arch/um/drivers/port_kern.c +39 -43

198 lines not on this page · raw message

arch/um/drivers/pty.c +10 -4
Index: linux-2.6.21-mm/arch/um/drivers/pty.c
===================================================================
@@ -56,11 +56,11 @@ static int pts_open(int input, int outpu
 	if (data->raw) {
 		CATCH_EINTR(err = tcgetattr(fd, &data->tt));
 		if (err)
-			return err;
+			goto out_close;
 
 		err = raw(fd);
 		if (err)
-			return err;
+			goto out_close;
 	}
 
 	dev = ptsname(fd);
@@ -71,6 +71,10 @@ static int pts_open(int input, int outpu
 		(*data->announce)(dev, data->dev);
 
 	return fd;
+
+out_close:
+	close(fd);
+	return err;
 }
 
 static int getmaster(char *line)
@@ -119,10 +123,12 @@ static int pty_open(int input, int outpu
 	if (fd < 0)
 		return fd;
 
-	if(data->raw){
+	if (data->raw) {
 		err = raw(fd);
-		if (err)
+		if (err) {
+			close(fd);
 			return err;
+		}
 	}
 	
 	if (data->announce)
arch/um/drivers/port_user.c +35 -38

170 lines not on this page · raw message

arch/um/drivers/tty.c +22 -15
Index: linux-2.6.21-mm/arch/um/drivers/tty.c
===================================================================
@@ -1,16 +1,16 @@
 /*
- * Copyright (C) 2001 Jeff Dike ([email protected])
+ * Copyright (C) 2001 - 2007 Jeff Dike (jdike@{linux.intel,addtoit}.com)
  * Licensed under the GPL
  */
 
-#include <stdio.h>
-#include <termios.h>
 #include <errno.h>
-#include <unistd.h>
+#include <fcntl.h>
+#include <termios.h>
 #include "chan_user.h"
-#include "user.h"
+#include "kern_constants.h"
 #include "os.h"
 #include "um_malloc.h"
+#include "user.h"
 
 struct tty_chan {
 	char *dev;
@@ -22,15 +22,15 @@ static void *tty_chan_init(char *str, in
 {
 	struct tty_chan *data;
 
-	if(*str != ':'){
-		printk("tty_init : channel type 'tty' must specify "
+	if (*str != ':') {
+		printk(UM_KERN_ERR "tty_init : channel type 'tty' must specify "
 		       "a device\n");
 		return NULL;
 	}
 	str++;
 
 	data = kmalloc(sizeof(*data), UM_GFP_KERNEL);
-	if(data == NULL)
+	if (data == NULL)
 		return NULL;
 	*data = ((struct tty_chan) { .dev 	= str,
 				     .raw 	= opts->raw });
@@ -42,19 +42,26 @@ static int tty_open(int input, int outpu
 		    char **dev_out)
 {
 	struct tty_chan *data = d;
-	int fd, err;
+	int fd, err, mode = 0;
 
-	fd = os_open_file(data->dev, of_set_rw(OPENFLAGS(), input, output), 0);
-	if(fd < 0)
-		return fd;
+	if (input && output)
+		mode = O_RDWR;
+	else if (input)
+		mode = O_RDONLY;
+	else if (output)
+		mode = O_WRONLY;
+
+	fd = open(data->dev, mode);
+	if (fd < 0)
+		return -errno;
 
-	if(data->raw){
+	if (data->raw) {
 		CATCH_EINTR(err = tcgetattr(fd, &data->tt));
-		if(err)
+		if (err)
 			return err;
 
 		err = raw(fd);
-		if(err)
+		if (err)
 			return err;
 	}
 
arch/um/drivers/xterm.c +6 -10
Index: linux-2.6.21-mm/arch/um/drivers/xterm.c
===================================================================
@@ -3,18 +3,19 @@
  * Licensed under the GPL
  */
 
+#include <stddef.h>
 #include <stdlib.h>
 #include <stdio.h>
 #include <unistd.h>
-#include <string.h>
 #include <errno.h>
+#include <string.h>
 #include <termios.h>
 #include "chan_user.h"
+#include "kern_constants.h"
 #include "os.h"
-#include "init.h"
+#include "um_malloc.h"
 #include "user.h"
 #include "xterm.h"
-#include "kern_constants.h"
 
 struct xterm_chan {
 	int pid;
@@ -29,7 +30,7 @@ static void *xterm_init(char *str, int d
 {
 	struct xterm_chan *data;
 
-	data = malloc(sizeof(*data));
+	data = kmalloc(sizeof(*data), UM_GFP_KERNEL);
 	if (data == NULL)
 		return NULL;
 	*data = ((struct xterm_chan) { .pid 		= -1,
@@ -207,11 +208,6 @@ static void xterm_close(int fd, void *d)
 	os_close_file(fd);
 }
 
-static void xterm_free(void *d)
-{
-	free(d);
-}
-
 const struct chan_ops xterm_ops = {
 	.type		= "xterm",
 	.init		= xterm_init,
@@ -221,6 +217,6 @@ const struct chan_ops xterm_ops = {
 	.write		= generic_write,
 	.console_write	= generic_console_write,
 	.window_size	= generic_window_size,
-	.free		= xterm_free,
+	.free		= generic_free,
 	.winch		= 1,
 };
arch/um/drivers/chan_user.c +59 -54

216 lines not on this page · raw message

-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a browser. Download your FREE copy of Splunk now >> http://get.splunk.com/
_______________________________________________
User-mode-linux-devel mailing list [email protected]
https://lists.sourceforge.net/lists/listinfo/user-mode-linux-devel