garmin_gps not working with etrex vista cx
I can't seem to transfer routes to my garmin etrex vista cx. I get (repeatably) truncated routes, and:
Jul 31 07:19:07 nbecker4 kernel: usb 2-2: reset full speed USB device using ohci_hcd and address 3 Jul 31 07:24:05 nbecker4 kernel: usb 2-2: reset full speed USB device using ohci_hcd and address 3 Jul 31 07:26:04 nbecker4 last message repeated 3 times
...
The problem must be the kernel driver, because I can d/l the same file using windoze without problems.
Jul 31 07:13:18 nbecker4 kernel: garmin_gps 2-2:1.0: Garmin GPS usb/tty
converter detected
Quoted 7 lines · On Tue, 31 Jul 2007 10:44:39 -0400 Neal Becker <[email protected]> wrote:
I can't seem to transfer routes to my garmin etrex vista cx. I get (repeatably) truncated routes, and:
Jul 31 07:19:07 nbecker4 kernel: usb 2-2: reset full speed USB device using ohci_hcd and address 3 Jul 31 07:24:05 nbecker4 kernel: usb 2-2: reset full speed USB device using ohci_hcd and address 3 Jul 31 07:26:04 nbecker4 last message repeated 3 times
Quoted 8 lines
...
The problem must be the kernel driver, because I can d/l the same file using windoze without problems.
Jul 31 07:13:18 nbecker4 kernel: garmin_gps 2-2:1.0: Garmin GPS usb/ttyconverter detected
Which kernel version are you using?
Did any earlier kernel version work correctly?
(Use verizon vznavigator instead - it's kewl ;))
Hi Neal,
sounds familiar, if you are using gpsbabel to transfer the tracks. Can you try version 0.31 from http://sourceforge.net/project/showfiles.php?group_id=115375
and see if this fixes the problem ?
Best regards,
Hermann