ide-pmac: use ide_tune_dma() (take 2)
PATCH 1/1 ide-pmac: use ide_tune_dma() (take 2)
* Add missing initialization of hwif->autodma and drive->autodma to pmac_ide_setup_dma().
* Use ide_tune_dma() in pmac_ide_dma_check().
While at it:
* Fix pmac_ide_dma_check() return value if DMA mode is not programmed (should be "-1" otherwise ide_set_dma() will try to enable DMA).
* Remove unnecessary drive->using_dma fiddling (->dma_off_quietly is always called before ide_set_dma() call and ide_set_dma() calls ->ide_dma_on if ->ide_dma_check returns "0").
v2:
* No reason to blacklist all ide_floppy devices and the old code was always enabling DMA anyway (without even programming controller/device if the device was ide_floppy).
---
Ben, any update on the testing status of ide-pmac series?
I also merged your patch to my tree but it is lacking description:
http://kernel.org/pub/linux/kernel/people/bart/pata-2.6/patches/ide-pmac-fix-pio-setup-and-enable-autotune.patch
Thanks, Bart.
drivers/ide/ppc/pmac.c | 24 +++++++----------------- 1 file changed, 7 insertions(+), 17 deletions(-)
drivers/ide/ppc/pmac.c +7 -17
@@ -1592,23 +1592,10 @@ pmac_ide_destroy_dmatable (ide_drive_t *static int pmac_ide_dma_check (ide_drive_t *drive) { -int enable =1 ; - drive->using_dma =0 ; - -if (drive->media == ide_floppy) - enable =0 ; -if ((drive->id->capability &1 ) ==0 && !__ide_dma_good_drive (drive)) - enable =0 ; -if (__ide_dma_bad_drive (drive)) - enable =0 ; - -if (enable) { -u8 mode =ide_max_dma_mode (drive); +if (ide_tune_dma (drive)) +return 0 ; -if (mode &&pmac_ide_tune_chipset (drive, mode) ==0 ) - drive->using_dma =1 ; - } -return 0 ; +return -1 ; }/*
@@ -1842,7 +1829,10 @@ pmac_ide_setup_dma(pmac_ide_hwif_t *pmif hwif->mwdma_mask =0x07 ; hwif->swdma_mask =0x00 ; break; - } + } + + hwif->autodma =1 ; + hwif->drives[1 ].autodma = hwif->drives[0 ].autodma = hwif->autodma; }#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */