early boot lockup with 2.6.23-rc1
Hello,
Since 2.6.23-rc1 I can't boot an old k6 (with a funky IDE drive worth testing with libata). The boot hangs without a sound or letter prints on the screen right after grub, while 2.6.22.1 works fine.
Is my .config broken in ways I can't see, or is this perhaps regression?
config diff to 2.6.22.1, full config with 2.6.23-rc1 and lshw output follows. The k6 runs Debian etch, though the kernels are build on Debian sid with tools:
$ cc --version | grep cc cc (GCC) 4.1.3 20070718 (prerelease) (Debian 4.1.2-14) $ apt-cache policy binutils | grep \* *** 2.17cvs20070718-1 0
-Mikko
boot/config-2.6.23-rc1 renamed from boot/config-2.6.22.1 +58 -135
@@ -1,10 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22.1 -# Sun Aug 5 11:21:34 2007 +# Linux kernel version: 2.6.23-rc1 +# Wed Aug 8 10:21:07 2007 # CONFIG_X86_32=y CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
@@ -37,13 +38,12 @@ CONFIG_LOCALVERSION="" # CONFIG_LOCALVERSION_AUTO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_BSD_PROCESS_ACCT_V3=y # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set +# CONFIG_USER_NS is not set CONFIG_AUDIT=y # CONFIG_AUDITSYSCALL is not set # CONFIG_IKCONFIG is not set
@@ -80,10 +80,6 @@ CONFIG_SLAB=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y
@@ -91,14 +87,11 @@ CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y CONFIG_STOP_MACHINE=y - -# -# Block layer -# CONFIG_BLOCK=y CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set CONFIG_LSF=y +# CONFIG_BLK_DEV_BSG is not set # # IO Schedulers
@@ -116,9 +109,9 @@ CONFIG_DEFAULT_IOSCHED="cfq" # # Processor type and features # -CONFIG_TICK_ONESHOT=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set CONFIG_SMP=y CONFIG_X86_PC=y # CONFIG_X86_ELAN is not set
@@ -129,8 +122,7 @@ CONFIG_X86_PC=y # CONFIG_X86_VISWS is not set # CONFIG_X86_GENERICARCH is not set # CONFIG_X86_ES7000 is not set -CONFIG_PARAVIRT=y -CONFIG_VMI=y +# CONFIG_PARAVIRT is not set # CONFIG_M386 is not set CONFIG_M486=y # CONFIG_M586 is not set
@@ -155,9 +147,9 @@ CONFIG_M486=y # CONFIG_MCYRIXIII is not set # CONFIG_MVIAC3_2 is not set # CONFIG_MVIAC7 is not set -# CONFIG_X86_GENERIC is not set +CONFIG_X86_GENERIC=y CONFIG_X86_CMPXCHG=y -CONFIG_X86_L1_CACHE_SHIFT=4 +CONFIG_X86_L1_CACHE_SHIFT=7 CONFIG_X86_XADD=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set
@@ -170,7 +162,8 @@ CONFIG_X86_INVLPG=y CONFIG_X86_BSWAP=y CONFIG_X86_POPAD_OK=y CONFIG_X86_ALIGNMENT_16=y -CONFIG_X86_MINIMUM_CPU_MODEL=4 +CONFIG_X86_INTEL_USERCOPY=y +CONFIG_X86_MINIMUM_CPU_FAMILY=4 CONFIG_HPET_TIMER=y CONFIG_NR_CPUS=8 CONFIG_SCHED_SMT=y
@@ -199,6 +192,7 @@ CONFIG_X86_CPUID=m CONFIG_EDD=m CONFIG_DELL_RBU=m CONFIG_DCDBAS=m +CONFIG_DMIID=y # CONFIG_NOHIGHMEM is not set CONFIG_HIGHMEM4G=y # CONFIG_HIGHMEM64G is not set
@@ -218,7 +212,9 @@ CONFIG_SPARSEMEM_STATIC=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y CONFIG_NR_QUICK=1 +CONFIG_VIRT_TO_BUS=y # CONFIG_HIGHPTE is not set # CONFIG_MATH_EMULATION is not set CONFIG_MTRR=y
@@ -234,7 +230,7 @@ CONFIG_KEXEC=y CONFIG_PHYSICAL_START=0x100000 # CONFIG_RELOCATABLE is not set CONFIG_PHYSICAL_ALIGN=0x100000 -CONFIG_HOTPLUG_CPU=y +# CONFIG_HOTPLUG_CPU is not set CONFIG_COMPAT_VDSO=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
@@ -308,7 +304,6 @@ CONFIG_ASK_IP_FIB_HASH=y CONFIG_IP_FIB_HASH=y CONFIG_IP_MULTIPLE_TABLES=y CONFIG_IP_ROUTE_MULTIPATH=y -# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set CONFIG_IP_ROUTE_VERBOSE=y # CONFIG_IP_PNP is not set CONFIG_NET_IPIP=m
@@ -406,6 +401,7 @@ CONFIG_IEEE80211_CRYPT_WEP=m # CONFIG_IEEE80211_CRYPT_TKIP is not set # CONFIG_IEEE80211_SOFTMAC is not set # CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers
@@ -420,27 +416,11 @@ CONFIG_FW_LOADER=m # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# CONFIG_CONNECTOR=m # CONFIG_MTD is not set - -# -# Parallel port support -# # CONFIG_PARPORT is not set - -# -# Plug and Play support -# # CONFIG_PNP is not set -# CONFIG_PNPACPI is not set - -# -# Block devices -# +CONFIG_BLK_DEV=y CONFIG_BLK_DEV_FD=m CONFIG_BLK_DEV_XD=m CONFIG_BLK_CPQ_DA=m
@@ -462,12 +442,10 @@ CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set CONFIG_ATA_OVER_ETH=m - -# -# Misc devices -# +CONFIG_MISC_DEVICES=y # CONFIG_IBM_ASM is not set # CONFIG_PHANTOM is not set +# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set CONFIG_TIFM_CORE=m # CONFIG_TIFM_7XX1 is not set
@@ -478,6 +456,7 @@ CONFIG_TIFM_CORE=m # CONFIG_RAID_ATTRS=m CONFIG_SCSI=m +CONFIG_SCSI_DMA=y CONFIG_SCSI_TGT=m CONFIG_SCSI_NETLINK=y CONFIG_SCSI_PROC_FS=y
@@ -508,12 +487,8 @@ CONFIG_SCSI_WAIT_SCAN=m CONFIG_SCSI_SPI_ATTRS=m CONFIG_SCSI_FC_ATTRS=m CONFIG_SCSI_ISCSI_ATTRS=m -CONFIG_SCSI_SAS_ATTRS=m # CONFIG_SCSI_SAS_LIBSAS is not set - -# -# SCSI low-level drivers -# +CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set
@@ -624,15 +599,6 @@ CONFIG_PATA_SIS=m # CONFIG_PATA_VIA is not set CONFIG_PATA_WINBOND=m CONFIG_PATA_WINBOND_VLB=m - -# -# Old CD-ROM drivers (not SCSI, not IDE) -# -# CONFIG_CD_NO_IDESCSI is not set - -# -# Multi-device support (RAID and LVM) -# CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m
@@ -651,6 +617,7 @@ CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m CONFIG_DM_MULTIPATH_EMC=m +# CONFIG_DM_MULTIPATH_RDAC is not set CONFIG_DM_DELAY=m #
@@ -666,19 +633,13 @@ CONFIG_DM_DELAY=m # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set - -# -# I2O device support -# # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set - -# -# Network device support -# CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set CONFIG_DUMMY=m # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set CONFIG_TUN=m # CONFIG_ARCNET is not set
@@ -695,13 +656,10 @@ CONFIG_CICADA_PHY=m CONFIG_VITESSE_PHY=m CONFIG_SMSC_PHY=m CONFIG_BROADCOM_PHY=m +# CONFIG_ICPLUS_PHY is not set CONFIG_FIXED_PHY=m # CONFIG_FIXED_MII_10_FDX is not set # CONFIG_FIXED_MII_100_FDX is not set - -# -# Ethernet (10 or 100Mbit) -# CONFIG_NET_ETHERNET=y CONFIG_MII=m # CONFIG_HAPPYMEAL is not set
@@ -711,10 +669,6 @@ CONFIG_MII=m # CONFIG_LANCE is not set # CONFIG_NET_VENDOR_SMC is not set # CONFIG_NET_VENDOR_RACAL is not set - -# -# Tulip family network device support -# # CONFIG_NET_TULIP is not set # CONFIG_AT1700 is not set # CONFIG_DEPCA is not set
@@ -778,6 +732,7 @@ CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m CONFIG_PPP_MPPE=m CONFIG_PPPOE=m +# CONFIG_PPPOL2TP is not set # CONFIG_SLIP is not set CONFIG_SLHC=m # CONFIG_NET_FC is not set
@@ -785,15 +740,7 @@ CONFIG_SLHC=m # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set #
@@ -801,7 +748,7 @@ CONFIG_SLHC=m # CONFIG_INPUT=y CONFIG_INPUT_FF_MEMLESS=m -# CONFIG_INPUT_POLLDEV is not set +CONFIG_INPUT_POLLDEV=m # # Userland interfaces
@@ -865,6 +812,8 @@ CONFIG_JOYSTICK_STINGER=m CONFIG_JOYSTICK_TWIDJOY=m CONFIG_JOYSTICK_JOYDUMP=m CONFIG_JOYSTICK_XPAD=m +# CONFIG_JOYSTICK_XPAD_FF is not set +# CONFIG_JOYSTICK_XPAD_LEDS is not set CONFIG_INPUT_TABLET=y CONFIG_TABLET_USB_ACECAD=m CONFIG_TABLET_USB_AIPTEK=m
@@ -872,6 +821,7 @@ CONFIG_TABLET_USB_GTCO=m CONFIG_TABLET_USB_KBTAB=m CONFIG_TABLET_USB_WACOM=m CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_FUJITSU is not set CONFIG_TOUCHSCREEN_GUNZE=m CONFIG_TOUCHSCREEN_ELO=m CONFIG_TOUCHSCREEN_MTOUCH=m
@@ -888,6 +838,7 @@ CONFIG_TOUCHSCREEN_USB_ITM=y CONFIG_TOUCHSCREEN_USB_ETURBO=y CONFIG_TOUCHSCREEN_USB_GUNZE=y CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y +CONFIG_TOUCHSCREEN_USB_IRTOUCH=y CONFIG_INPUT_MISC=y CONFIG_INPUT_PCSPKR=m CONFIG_INPUT_WISTRON_BTNS=m
@@ -946,6 +897,7 @@ CONFIG_STALDRV=y # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_FIX_EARLYCON_MEM=y CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_NR_UARTS=16 CONFIG_SERIAL_8250_RUNTIME_UARTS=4
@@ -968,10 +920,6 @@ CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_JSM=m CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set - -# -# IPMI -# CONFIG_IPMI_HANDLER=m # CONFIG_IPMI_PANIC_EVENT is not set CONFIG_IPMI_DEVICE_INTERFACE=m
@@ -1071,10 +1019,6 @@ CONFIG_CS5535_GPIO=m CONFIG_RAW_DRIVER=m CONFIG_MAX_RAW_DEVS=256 CONFIG_HANGCHECK_TIMER=m - -# -# TPM devices -# # CONFIG_TCG_TPM is not set CONFIG_TELCLOCK=m CONFIG_DEVPORT=y
@@ -1111,6 +1055,7 @@ CONFIG_SCx200_ACB=m CONFIG_I2C_SIS5595=m CONFIG_I2C_SIS630=m CONFIG_I2C_SIS96X=m +# CONFIG_I2C_TAOS_EVM is not set CONFIG_I2C_STUB=m CONFIG_I2C_TINY_USB=m CONFIG_I2C_VIA=m
@@ -1123,11 +1068,13 @@ CONFIG_I2C_PCA_ISA=m # CONFIG_SENSORS_DS1337=m CONFIG_SENSORS_DS1374=m +# CONFIG_DS1682 is not set CONFIG_SENSORS_EEPROM=m CONFIG_SENSORS_PCF8574=m CONFIG_SENSORS_PCA9539=m CONFIG_SENSORS_PCF8591=m CONFIG_SENSORS_MAX6875=m +# CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set
@@ -1138,11 +1085,8 @@ CONFIG_SENSORS_MAX6875=m # # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# # CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set #
@@ -1166,8 +1110,8 @@ CONFIG_VIDEO_V4L2=y # Graphics support # CONFIG_BACKLIGHT_LCD_SUPPORT=y -CONFIG_BACKLIGHT_CLASS_DEVICE=y # CONFIG_LCD_CLASS_DEVICE is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y # CONFIG_BACKLIGHT_PROGEAR is not set #
@@ -1179,6 +1123,7 @@ CONFIG_DISPLAY_SUPPORT=m # Display hardware drivers # # CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m # CONFIG_FB is not set #
@@ -1195,10 +1140,7 @@ CONFIG_DUMMY_CONSOLE=y # # CONFIG_SOUND is not set CONFIG_AC97_BUS=m - -# -# HID Devices -# +CONFIG_HID_SUPPORT=y CONFIG_HID=m # CONFIG_HID_DEBUG is not set
@@ -1212,10 +1154,7 @@ CONFIG_HID=m # CONFIG_USB_KBD=m CONFIG_USB_MOUSE=m - -# -# USB support -# +CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y
@@ -1238,6 +1177,7 @@ CONFIG_USB=m # CONFIG_USB_OHCI_HCD is not set # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set # # USB Device Class drivers
@@ -1302,11 +1242,8 @@ CONFIG_USB=m # # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set - -# -# LED devices -# -# CONFIG_NEW_LEDS is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=m # # LED drivers
@@ -1315,15 +1252,8 @@ CONFIG_USB=m # # LED Triggers # - -# -# InfiniBand support -# +# CONFIG_LEDS_TRIGGERS is not set # CONFIG_INFINIBAND is not set - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# # CONFIG_EDAC is not set #
@@ -1345,11 +1275,12 @@ CONFIG_NET_DMA=y # DMA Devices # CONFIG_INTEL_IOATDMA=m +# CONFIG_VIRTUALIZATION is not set # -# Virtualization +# Userspace I/O # -# CONFIG_KVM is not set +# CONFIG_UIO is not set # # File systems
@@ -1456,7 +1387,6 @@ CONFIG_UFS_FS=m # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types
@@ -1535,10 +1465,7 @@ CONFIG_NLS_UTF8=m # Distributed Lock Manager # # CONFIG_DLM is not set - -# -# Instrumentation Support -# +CONFIG_INSTRUMENTATION=y # CONFIG_PROFILING is not set # CONFIG_KPROBES is not set
@@ -1555,6 +1482,7 @@ CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set CONFIG_TIMER_STATS=y # CONFIG_DEBUG_SLAB is not set
@@ -1564,6 +1492,7 @@ CONFIG_TIMER_STATS=y # CONFIG_DEBUG_MUTEXES is not set # CONFIG_DEBUG_LOCK_ALLOC is not set # CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set
@@ -1597,10 +1526,10 @@ CONFIG_SECURITY_NETWORK_XFRM=y CONFIG_SECURITY_CAPABILITIES=y # CONFIG_SECURITY_ROOTPLUG is not set # CONFIG_SECURITY_SELINUX is not set - -# -# Cryptographic options -# +CONFIG_XOR_BLOCKS=m +CONFIG_ASYNC_CORE=m +CONFIG_ASYNC_MEMCPY=m +CONFIG_ASYNC_XOR=m CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=m
@@ -1642,14 +1571,7 @@ CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_CAMELLIA=m CONFIG_CRYPTO_TEST=m - -# -# Hardware crypto devices -# -CONFIG_CRYPTO_DEV_PADLOCK=m -CONFIG_CRYPTO_DEV_PADLOCK_AES=m -CONFIG_CRYPTO_DEV_PADLOCK_SHA=m -CONFIG_CRYPTO_DEV_GEODE=m +# CONFIG_CRYPTO_HW is not set # # Library routines
@@ -1659,6 +1581,7 @@ CONFIG_CRC_CCITT=m CONFIG_CRC16=m CONFIG_CRC_ITU_T=m CONFIG_CRC32=y +# CONFIG_CRC7 is not set CONFIG_LIBCRC32C=m CONFIG_AUDIT_GENERIC=y CONFIG_ZLIB_INFLATE=y
Whole config:
#
# Automatically generated make config: don't edit # Linux kernel version: 2.6.23-rc1
# Wed Aug 8 10:21:07 2007
#CONFIG_X86_32=yCONFIG_GENERIC_TIME=yCONFIG_GENERIC_CMOS_UPDATE=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_SEMAPHORE_SLEEPERS=yCONFIG_X86=yCONFIG_MMU=yCONFIG_ZONE_DMA=yCONFIG_QUICKLIST=yCONFIG_GENERIC_ISA_DMA=yCONFIG_GENERIC_IOMAP=yCONFIG_GENERIC_BUG=yCONFIG_GENERIC_HWEIGHT=y CONFIG_ARCH_MAY_HAVE_PC_FDC=yCONFIG_DMI=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
#CONFIG_EXPERIMENTAL=yCONFIG_LOCK_KERNEL=yCONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not setCONFIG_SWAP=yCONFIG_SYSVIPC=yCONFIG_SYSVIPC_SYSCTL=yCONFIG_POSIX_MQUEUE=yCONFIG_BSD_PROCESS_ACCT=yCONFIG_BSD_PROCESS_ACCT_V3=y
# CONFIG_TASKSTATS is not set
# CONFIG_USER_NS is not setCONFIG_AUDIT=y
# CONFIG_AUDITSYSCALL is not set
# CONFIG_IKCONFIG is not setCONFIG_LOG_BUF_SHIFT=19CONFIG_CPUSETS=yCONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not setCONFIG_BLK_DEV_INITRD=yCONFIG_INITRAMFS_SOURCE=""CONFIG_CC_OPTIMIZE_FOR_SIZE=yCONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not setCONFIG_UID16=yCONFIG_SYSCTL_SYSCALL=yCONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not setCONFIG_HOTPLUG=yCONFIG_PRINTK=yCONFIG_BUG=yCONFIG_ELF_CORE=yCONFIG_BASE_FULL=yCONFIG_FUTEX=yCONFIG_ANON_INODES=yCONFIG_EPOLL=yCONFIG_SIGNALFD=yCONFIG_TIMERFD=yCONFIG_EVENTFD=yCONFIG_SHMEM=yCONFIG_VM_EVENT_COUNTERS=yCONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not setCONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not setCONFIG_BASE_SMALL=0CONFIG_MODULES=yCONFIG_MODULE_UNLOAD=yCONFIG_MODULE_FORCE_UNLOAD=yCONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not setCONFIG_KMOD=yCONFIG_STOP_MACHINE=yCONFIG_BLOCK=yCONFIG_LBD=y
# CONFIG_BLK_DEV_IO_TRACE is not setCONFIG_LSF=y
# CONFIG_BLK_DEV_BSG is not set
#
# IO Schedulers
#CONFIG_IOSCHED_NOOP=yCONFIG_IOSCHED_AS=yCONFIG_IOSCHED_DEADLINE=yCONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not setCONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not setCONFIG_DEFAULT_IOSCHED="cfq"
#
# Processor type and features
#
# CONFIG_TICK_ONESHOT is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not setCONFIG_SMP=yCONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_PARAVIRT is not set
# CONFIG_M386 is not setCONFIG_M486=y
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MCORE2 is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not setCONFIG_X86_GENERIC=yCONFIG_X86_CMPXCHG=yCONFIG_X86_L1_CACHE_SHIFT=7CONFIG_X86_XADD=yCONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not setCONFIG_GENERIC_CALIBRATE_DELAY=yCONFIG_X86_PPRO_FENCE=yCONFIG_X86_F00F_BUG=yCONFIG_X86_WP_WORKS_OK=yCONFIG_X86_INVLPG=yCONFIG_X86_BSWAP=yCONFIG_X86_POPAD_OK=yCONFIG_X86_ALIGNMENT_16=yCONFIG_X86_INTEL_USERCOPY=yCONFIG_X86_MINIMUM_CPU_FAMILY=4CONFIG_HPET_TIMER=yCONFIG_NR_CPUS=8CONFIG_SCHED_SMT=yCONFIG_SCHED_MC=yCONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
# CONFIG_PREEMPT_BKL is not setCONFIG_X86_LOCAL_APIC=yCONFIG_X86_IO_APIC=yCONFIG_X86_MCE=yCONFIG_X86_MCE_NONFATAL=mCONFIG_X86_MCE_P4THERMAL=yCONFIG_VM86=yCONFIG_TOSHIBA=mCONFIG_I8K=m
# CONFIG_X86_REBOOTFIXUPS is not setCONFIG_MICROCODE=mCONFIG_MICROCODE_OLD_INTERFACE=yCONFIG_X86_MSR=mCONFIG_X86_CPUID=m
#
# Firmware Drivers
#CONFIG_EDD=mCONFIG_DELL_RBU=mCONFIG_DCDBAS=mCONFIG_DMIID=y
# CONFIG_NOHIGHMEM is not setCONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not setCONFIG_PAGE_OFFSET=0xC0000000CONFIG_HIGHMEM=yCONFIG_ARCH_FLATMEM_ENABLE=yCONFIG_ARCH_SPARSEMEM_ENABLE=yCONFIG_ARCH_SELECT_MEMORY_MODEL=yCONFIG_ARCH_POPULATES_NODE_MAP=yCONFIG_SELECT_MEMORY_MODEL=yCONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not setCONFIG_FLATMEM=yCONFIG_FLAT_NODE_MEM_MAP=yCONFIG_SPARSEMEM_STATIC=yCONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not setCONFIG_ZONE_DMA_FLAG=1CONFIG_BOUNCE=yCONFIG_NR_QUICK=1CONFIG_VIRT_TO_BUS=y
# CONFIG_HIGHPTE is not set
# CONFIG_MATH_EMULATION is not setCONFIG_MTRR=y
# CONFIG_IRQBALANCE is not set
# CONFIG_SECCOMP is not set
# CONFIG_HZ_100 is not setCONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not setCONFIG_HZ=250CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not setCONFIG_PHYSICAL_START=0x100000
# CONFIG_RELOCATABLE is not setCONFIG_PHYSICAL_ALIGN=0x100000
# CONFIG_HOTPLUG_CPU is not setCONFIG_COMPAT_VDSO=yCONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management options (ACPI, APM)
#
# CONFIG_PM is not set
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not setCONFIG_PCI_GOANY=yCONFIG_PCI_BIOS=yCONFIG_PCI_DIRECT=y
# CONFIG_PCIEPORTBUS is not setCONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_DEBUG is not setCONFIG_HT_IRQ=yCONFIG_ISA_DMA_API=yCONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not setCONFIG_K8_NB=y
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
#CONFIG_BINFMT_ELF=yCONFIG_BINFMT_AOUT=mCONFIG_BINFMT_MISC=m
#
# Networking
#CONFIG_NET=y
#
# Networking options
#CONFIG_PACKET=yCONFIG_PACKET_MMAP=yCONFIG_UNIX=yCONFIG_XFRM=yCONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not setCONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not setCONFIG_INET=yCONFIG_IP_MULTICAST=yCONFIG_IP_ADVANCED_ROUTER=yCONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not setCONFIG_IP_FIB_HASH=yCONFIG_IP_MULTIPLE_TABLES=yCONFIG_IP_ROUTE_MULTIPATH=yCONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not setCONFIG_NET_IPIP=mCONFIG_NET_IPGRE=mCONFIG_NET_IPGRE_BROADCAST=yCONFIG_IP_MROUTE=yCONFIG_IP_PIMSM_V1=yCONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not setCONFIG_SYN_COOKIES=yCONFIG_INET_AH=mCONFIG_INET_ESP=mCONFIG_INET_IPCOMP=mCONFIG_INET_XFRM_TUNNEL=mCONFIG_INET_TUNNEL=mCONFIG_INET_XFRM_MODE_TRANSPORT=mCONFIG_INET_XFRM_MODE_TUNNEL=mCONFIG_INET_XFRM_MODE_BEET=mCONFIG_INET_DIAG=mCONFIG_INET_TCP_DIAG=mCONFIG_TCP_CONG_ADVANCED=yCONFIG_TCP_CONG_BIC=yCONFIG_TCP_CONG_CUBIC=mCONFIG_TCP_CONG_WESTWOOD=mCONFIG_TCP_CONG_HTCP=mCONFIG_TCP_CONG_HSTCP=mCONFIG_TCP_CONG_HYBLA=mCONFIG_TCP_CONG_VEGAS=mCONFIG_TCP_CONG_SCALABLE=mCONFIG_TCP_CONG_LP=mCONFIG_TCP_CONG_VENO=mCONFIG_TCP_CONG_YEAH=mCONFIG_TCP_CONG_ILLINOIS=mCONFIG_DEFAULT_BIC=y
# CONFIG_DEFAULT_CUBIC is not set
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not setCONFIG_DEFAULT_TCP_CONG="bic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETLABEL is not setCONFIG_NETWORK_SECMARK=y
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not setCONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not setCONFIG_SCTP_HMAC_MD5=y
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not setCONFIG_AF_RXRPC=m
# CONFIG_AF_RXRPC_DEBUG is not set
# CONFIG_RXKAD is not setCONFIG_FIB_RULES=y
#
# Wireless
#
# CONFIG_CFG80211 is not setCONFIG_WIRELESS_EXT=y
# CONFIG_MAC80211 is not setCONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not setCONFIG_IEEE80211_CRYPT_WEP=m
# CONFIG_IEEE80211_CRYPT_CCMP is not set
# CONFIG_IEEE80211_CRYPT_TKIP is not set
# CONFIG_IEEE80211_SOFTMAC is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# Device Drivers
#
#
# Generic Driver Options
#CONFIG_STANDALONE=yCONFIG_PREVENT_FIRMWARE_BUILD=yCONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not setCONFIG_CONNECTOR=m
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
# CONFIG_PNP is not setCONFIG_BLK_DEV=yCONFIG_BLK_DEV_FD=mCONFIG_BLK_DEV_XD=mCONFIG_BLK_CPQ_DA=mCONFIG_BLK_CPQ_CISS_DA=mCONFIG_CISS_SCSI_TAPE=yCONFIG_BLK_DEV_DAC960=mCONFIG_BLK_DEV_UMEM=m
# CONFIG_BLK_DEV_COW_COMMON is not setCONFIG_BLK_DEV_LOOP=mCONFIG_BLK_DEV_CRYPTOLOOP=mCONFIG_BLK_DEV_NBD=mCONFIG_BLK_DEV_SX8=m
# CONFIG_BLK_DEV_UB is not setCONFIG_BLK_DEV_RAM=yCONFIG_BLK_DEV_RAM_COUNT=16CONFIG_BLK_DEV_RAM_SIZE=8192CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024CONFIG_CDROM_PKTCDVD=mCONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not setCONFIG_ATA_OVER_ETH=mCONFIG_MISC_DEVICES=y
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not setCONFIG_TIFM_CORE=m
# CONFIG_TIFM_7XX1 is not set
# CONFIG_IDE is not set
#
# SCSI device support
#CONFIG_RAID_ATTRS=mCONFIG_SCSI=mCONFIG_SCSI_DMA=yCONFIG_SCSI_TGT=mCONFIG_SCSI_NETLINK=yCONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#CONFIG_BLK_DEV_SD=mCONFIG_CHR_DEV_ST=mCONFIG_CHR_DEV_OSST=mCONFIG_BLK_DEV_SR=mCONFIG_BLK_DEV_SR_VENDOR=yCONFIG_CHR_DEV_SG=mCONFIG_CHR_DEV_SCH=m
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs #CONFIG_SCSI_MULTI_LUN=yCONFIG_SCSI_CONSTANTS=yCONFIG_SCSI_LOGGING=yCONFIG_SCSI_SCAN_ASYNC=yCONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#CONFIG_SCSI_SPI_ATTRS=mCONFIG_SCSI_FC_ATTRS=mCONFIG_SCSI_ISCSI_ATTRS=m
# CONFIG_SCSI_SAS_LIBSAS is not setCONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_SEAGATE is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not setCONFIG_ATA=m
# CONFIG_ATA_NONSTANDARD is not setCONFIG_SATA_AHCI=mCONFIG_SATA_SVW=mCONFIG_ATA_PIIX=mCONFIG_SATA_MV=mCONFIG_SATA_NV=mCONFIG_PDC_ADMA=mCONFIG_SATA_QSTOR=mCONFIG_SATA_PROMISE=mCONFIG_SATA_SX4=mCONFIG_SATA_SIL=mCONFIG_SATA_SIL24=mCONFIG_SATA_SIS=mCONFIG_SATA_ULI=mCONFIG_SATA_VIA=mCONFIG_SATA_VITESSE=mCONFIG_SATA_INIC162X=m
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CS5535 is not set
# CONFIG_PATA_CYPRESS is not setCONFIG_PATA_EFAR=mCONFIG_ATA_GENERIC=m
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not setCONFIG_PATA_LEGACY=m
# CONFIG_PATA_TRIFLEX is not setCONFIG_PATA_MARVELL=mCONFIG_PATA_MPIIX=mCONFIG_PATA_OLDPIIX=m
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not setCONFIG_PATA_PDC_OLD=mCONFIG_PATA_QDI=mCONFIG_PATA_RADISYS=m
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not setCONFIG_PATA_SIS=m
# CONFIG_PATA_VIA is not setCONFIG_PATA_WINBOND=mCONFIG_PATA_WINBOND_VLB=mCONFIG_MD=yCONFIG_BLK_DEV_MD=mCONFIG_MD_LINEAR=mCONFIG_MD_RAID0=mCONFIG_MD_RAID1=mCONFIG_MD_RAID10=mCONFIG_MD_RAID456=mCONFIG_MD_RAID5_RESHAPE=yCONFIG_MD_MULTIPATH=mCONFIG_MD_FAULTY=mCONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not setCONFIG_DM_CRYPT=mCONFIG_DM_SNAPSHOT=mCONFIG_DM_MIRROR=mCONFIG_DM_ZERO=mCONFIG_DM_MULTIPATH=mCONFIG_DM_MULTIPATH_EMC=m
# CONFIG_DM_MULTIPATH_RDAC is not setCONFIG_DM_DELAY=m
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not setCONFIG_NETDEVICES=y
# CONFIG_NETDEVICES_MULTIQUEUE is not setCONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not setCONFIG_TUN=m
# CONFIG_ARCNET is not setCONFIG_PHYLIB=m
#
# MII PHY device drivers
#CONFIG_MARVELL_PHY=mCONFIG_DAVICOM_PHY=mCONFIG_QSEMI_PHY=mCONFIG_LXT_PHY=mCONFIG_CICADA_PHY=mCONFIG_VITESSE_PHY=mCONFIG_SMSC_PHY=mCONFIG_BROADCOM_PHY=m
# CONFIG_ICPLUS_PHY is not setCONFIG_FIXED_PHY=m
# CONFIG_FIXED_MII_10_FDX is not set
# CONFIG_FIXED_MII_100_FDX is not setCONFIG_NET_ETHERNET=yCONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_NET_TULIP is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not setCONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_CS89x0 is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not setCONFIG_8139CP=mCONFIG_8139TOO=mCONFIG_8139TOO_PIO=yCONFIG_8139TOO_TUNE_TWISTER=yCONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not setCONFIG_PPP=mCONFIG_PPP_MULTILINK=yCONFIG_PPP_FILTER=yCONFIG_PPP_ASYNC=mCONFIG_PPP_SYNC_TTY=mCONFIG_PPP_DEFLATE=mCONFIG_PPP_BSDCOMP=mCONFIG_PPP_MPPE=mCONFIG_PPPOE=m
# CONFIG_PPPOL2TP is not set
# CONFIG_SLIP is not setCONFIG_SLHC=m
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#CONFIG_INPUT=yCONFIG_INPUT_FF_MEMLESS=mCONFIG_INPUT_POLLDEV=m
#
# Userland interfaces
#CONFIG_INPUT_MOUSEDEV=yCONFIG_INPUT_MOUSEDEV_PSAUX=yCONFIG_INPUT_MOUSEDEV_SCREEN_X=1024CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768CONFIG_INPUT_JOYDEV=mCONFIG_INPUT_TSDEV=mCONFIG_INPUT_TSDEV_SCREEN_X=240CONFIG_INPUT_TSDEV_SCREEN_Y=320CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#CONFIG_INPUT_KEYBOARD=yCONFIG_KEYBOARD_ATKBD=yCONFIG_KEYBOARD_SUNKBD=mCONFIG_KEYBOARD_LKKBD=mCONFIG_KEYBOARD_XTKBD=mCONFIG_KEYBOARD_NEWTON=mCONFIG_KEYBOARD_STOWAWAY=mCONFIG_INPUT_MOUSE=yCONFIG_MOUSE_PS2=mCONFIG_MOUSE_PS2_ALPS=yCONFIG_MOUSE_PS2_LOGIPS2PP=yCONFIG_MOUSE_PS2_SYNAPTICS=yCONFIG_MOUSE_PS2_LIFEBOOK=yCONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not setCONFIG_MOUSE_SERIAL=mCONFIG_MOUSE_APPLETOUCH=mCONFIG_MOUSE_INPORT=m
# CONFIG_MOUSE_ATIXL is not setCONFIG_MOUSE_LOGIBM=mCONFIG_MOUSE_PC110PAD=mCONFIG_MOUSE_VSXXXAA=mCONFIG_INPUT_JOYSTICK=yCONFIG_JOYSTICK_ANALOG=mCONFIG_JOYSTICK_A3D=mCONFIG_JOYSTICK_ADI=mCONFIG_JOYSTICK_COBRA=mCONFIG_JOYSTICK_GF2K=mCONFIG_JOYSTICK_GRIP=mCONFIG_JOYSTICK_GRIP_MP=mCONFIG_JOYSTICK_GUILLEMOT=mCONFIG_JOYSTICK_INTERACT=mCONFIG_JOYSTICK_SIDEWINDER=mCONFIG_JOYSTICK_TMDC=mCONFIG_JOYSTICK_IFORCE=mCONFIG_JOYSTICK_IFORCE_USB=yCONFIG_JOYSTICK_IFORCE_232=yCONFIG_JOYSTICK_WARRIOR=mCONFIG_JOYSTICK_MAGELLAN=mCONFIG_JOYSTICK_SPACEORB=mCONFIG_JOYSTICK_SPACEBALL=mCONFIG_JOYSTICK_STINGER=mCONFIG_JOYSTICK_TWIDJOY=mCONFIG_JOYSTICK_JOYDUMP=mCONFIG_JOYSTICK_XPAD=m
# CONFIG_JOYSTICK_XPAD_FF is not set
# CONFIG_JOYSTICK_XPAD_LEDS is not setCONFIG_INPUT_TABLET=yCONFIG_TABLET_USB_ACECAD=mCONFIG_TABLET_USB_AIPTEK=mCONFIG_TABLET_USB_GTCO=mCONFIG_TABLET_USB_KBTAB=mCONFIG_TABLET_USB_WACOM=mCONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_FUJITSU is not setCONFIG_TOUCHSCREEN_GUNZE=mCONFIG_TOUCHSCREEN_ELO=mCONFIG_TOUCHSCREEN_MTOUCH=mCONFIG_TOUCHSCREEN_MK712=mCONFIG_TOUCHSCREEN_PENMOUNT=mCONFIG_TOUCHSCREEN_TOUCHRIGHT=mCONFIG_TOUCHSCREEN_TOUCHWIN=mCONFIG_TOUCHSCREEN_UCB1400=mCONFIG_TOUCHSCREEN_USB_COMPOSITE=mCONFIG_TOUCHSCREEN_USB_EGALAX=yCONFIG_TOUCHSCREEN_USB_PANJIT=yCONFIG_TOUCHSCREEN_USB_3M=yCONFIG_TOUCHSCREEN_USB_ITM=yCONFIG_TOUCHSCREEN_USB_ETURBO=yCONFIG_TOUCHSCREEN_USB_GUNZE=yCONFIG_TOUCHSCREEN_USB_DMC_TSC10=yCONFIG_TOUCHSCREEN_USB_IRTOUCH=yCONFIG_INPUT_MISC=yCONFIG_INPUT_PCSPKR=mCONFIG_INPUT_WISTRON_BTNS=mCONFIG_INPUT_ATI_REMOTE=mCONFIG_INPUT_ATI_REMOTE2=mCONFIG_INPUT_KEYSPAN_REMOTE=mCONFIG_INPUT_POWERMATE=mCONFIG_INPUT_YEALINK=mCONFIG_INPUT_UINPUT=m
#
# Hardware I/O ports
#CONFIG_SERIO=yCONFIG_SERIO_I8042=yCONFIG_SERIO_SERPORT=mCONFIG_SERIO_CT82C710=mCONFIG_SERIO_PCIPS2=mCONFIG_SERIO_LIBPS2=yCONFIG_SERIO_RAW=mCONFIG_GAMEPORT=mCONFIG_GAMEPORT_NS558=mCONFIG_GAMEPORT_L4=mCONFIG_GAMEPORT_EMU10K1=mCONFIG_GAMEPORT_FM801=m
#
# Character devices
#CONFIG_VT=yCONFIG_VT_CONSOLE=yCONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not setCONFIG_SERIAL_NONSTANDARD=y
# CONFIG_COMPUTONE is not setCONFIG_ROCKETPORT=mCONFIG_CYCLADES=m
# CONFIG_CYZ_INTR is not set
# CONFIG_DIGIEPCA is not set
# CONFIG_ESPSERIAL is not set
# CONFIG_MOXA_INTELLIO is not setCONFIG_MOXA_SMARTIO=mCONFIG_MOXA_SMARTIO_NEW=m
# CONFIG_ISI is not setCONFIG_SYNCLINK=mCONFIG_SYNCLINKMP=mCONFIG_SYNCLINK_GT=mCONFIG_N_HDLC=m
# CONFIG_SPECIALIX is not setCONFIG_SX=m
# CONFIG_RIO is not setCONFIG_STALDRV=y
#
# Serial drivers
#CONFIG_SERIAL_8250=yCONFIG_SERIAL_8250_CONSOLE=yCONFIG_FIX_EARLYCON_MEM=yCONFIG_SERIAL_8250_PCI=yCONFIG_SERIAL_8250_NR_UARTS=16CONFIG_SERIAL_8250_RUNTIME_UARTS=4CONFIG_SERIAL_8250_EXTENDED=yCONFIG_SERIAL_8250_MANY_PORTS=yCONFIG_SERIAL_8250_FOURPORT=mCONFIG_SERIAL_8250_ACCENT=mCONFIG_SERIAL_8250_BOCA=mCONFIG_SERIAL_8250_EXAR_ST16C554=mCONFIG_SERIAL_8250_HUB6=mCONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not setCONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#CONFIG_SERIAL_CORE=yCONFIG_SERIAL_CORE_CONSOLE=yCONFIG_SERIAL_JSM=mCONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not setCONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not setCONFIG_IPMI_DEVICE_INTERFACE=mCONFIG_IPMI_SI=mCONFIG_IPMI_WATCHDOG=mCONFIG_IPMI_POWEROFF=mCONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#CONFIG_SOFT_WATCHDOG=mCONFIG_ACQUIRE_WDT=mCONFIG_ADVANTECH_WDT=mCONFIG_ALIM1535_WDT=mCONFIG_ALIM7101_WDT=mCONFIG_SC520_WDT=mCONFIG_EUROTECH_WDT=mCONFIG_IB700_WDT=mCONFIG_IBMASR=mCONFIG_WAFER_WDT=mCONFIG_I6300ESB_WDT=mCONFIG_ITCO_WDT=m
# CONFIG_ITCO_VENDOR_SUPPORT is not setCONFIG_SC1200_WDT=mCONFIG_PC87413_WDT=mCONFIG_60XX_WDT=mCONFIG_SBC8360_WDT=mCONFIG_CPU5_WDT=mCONFIG_SMSC37B787_WDT=mCONFIG_W83627HF_WDT=mCONFIG_W83697HF_WDT=mCONFIG_W83877F_WDT=mCONFIG_W83977F_WDT=mCONFIG_MACHZ_WDT=mCONFIG_SBC_EPX_C3_WATCHDOG=m
#
# ISA-based Watchdog Cards
#CONFIG_PCWATCHDOG=mCONFIG_MIXCOMWD=mCONFIG_WDT=mCONFIG_WDT_501=y
#
# PCI-based Watchdog Cards
#CONFIG_PCIPCWATCHDOG=mCONFIG_WDTPCI=mCONFIG_WDT_501_PCI=y
#
# USB-based Watchdog Cards
#CONFIG_USBPCWATCHDOG=mCONFIG_HW_RANDOM=yCONFIG_HW_RANDOM_INTEL=mCONFIG_HW_RANDOM_AMD=mCONFIG_HW_RANDOM_GEODE=mCONFIG_HW_RANDOM_VIA=mCONFIG_NVRAM=mCONFIG_RTC=mCONFIG_GEN_RTC=mCONFIG_GEN_RTC_X=yCONFIG_DTLK=mCONFIG_R3964=mCONFIG_APPLICOM=mCONFIG_SONYPI=mCONFIG_AGP=mCONFIG_AGP_ALI=mCONFIG_AGP_ATI=mCONFIG_AGP_AMD=mCONFIG_AGP_AMD64=mCONFIG_AGP_INTEL=mCONFIG_AGP_NVIDIA=mCONFIG_AGP_SIS=mCONFIG_AGP_SWORKS=mCONFIG_AGP_VIA=mCONFIG_AGP_EFFICEON=mCONFIG_DRM=mCONFIG_DRM_TDFX=mCONFIG_DRM_R128=mCONFIG_DRM_RADEON=mCONFIG_DRM_I810=mCONFIG_DRM_I830=mCONFIG_DRM_I915=mCONFIG_DRM_MGA=mCONFIG_DRM_SIS=mCONFIG_DRM_VIA=mCONFIG_DRM_SAVAGE=mCONFIG_MWAVE=m
CONFIG_PC8736x_GPIO=mCONFIG_NSC_GPIO=mCONFIG_CS5535_GPIO=mCONFIG_RAW_DRIVER=mCONFIG_MAX_RAW_DEVS=256CONFIG_HANGCHECK_TIMER=m
# CONFIG_TCG_TPM is not setCONFIG_TELCLOCK=mCONFIG_DEVPORT=yCONFIG_I2C=mCONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_CHARDEV is not set
#
# I2C Algorithms
#CONFIG_I2C_ALGOBIT=mCONFIG_I2C_ALGOPCF=mCONFIG_I2C_ALGOPCA=m
#
# I2C Hardware Bus support
#CONFIG_I2C_ALI1535=mCONFIG_I2C_ALI1563=mCONFIG_I2C_ALI15X3=mCONFIG_I2C_AMD756=mCONFIG_I2C_AMD756_S4882=mCONFIG_I2C_AMD8111=mCONFIG_I2C_I801=mCONFIG_I2C_I810=mCONFIG_I2C_PIIX4=mCONFIG_I2C_NFORCE2=mCONFIG_I2C_OCORES=mCONFIG_I2C_PARPORT_LIGHT=mCONFIG_I2C_PROSAVAGE=mCONFIG_I2C_SAVAGE4=mCONFIG_I2C_SIMTEC=m
CONFIG_SCx200_ACB=mCONFIG_I2C_SIS5595=mCONFIG_I2C_SIS630=mCONFIG_I2C_SIS96X=m
# CONFIG_I2C_TAOS_EVM is not setCONFIG_I2C_STUB=mCONFIG_I2C_TINY_USB=mCONFIG_I2C_VIA=mCONFIG_I2C_VIAPRO=mCONFIG_I2C_VOODOO3=mCONFIG_I2C_PCA_ISA=m
#
# Miscellaneous I2C Chip support
#CONFIG_SENSORS_DS1337=mCONFIG_SENSORS_DS1374=m
# CONFIG_DS1682 is not setCONFIG_SENSORS_EEPROM=mCONFIG_SENSORS_PCF8574=mCONFIG_SENSORS_PCA9539=mCONFIG_SENSORS_PCF8591=mCONFIG_SENSORS_MAX6875=m
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#CONFIG_VIDEO_DEV=mCONFIG_VIDEO_V4L1=yCONFIG_VIDEO_V4L1_COMPAT=yCONFIG_VIDEO_V4L2=y
# CONFIG_VIDEO_CAPTURE_DRIVERS is not set
# CONFIG_RADIO_ADAPTERS is not set
# CONFIG_DVB_CORE is not set
# CONFIG_DAB is not set
#
# Graphics support
#CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not setCONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_PROGEAR is not set
#
# Display device support
#CONFIG_DISPLAY_SUPPORT=m
#
# Display hardware drivers
#
# CONFIG_VGASTATE is not setCONFIG_VIDEO_OUTPUT_CONTROL=m
# CONFIG_FB is not set
#
# Console display driver support
#CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not setCONFIG_VIDEO_SELECT=yCONFIG_MDA_CONSOLE=mCONFIG_DUMMY_CONSOLE=y
#
# Sound
#
# CONFIG_SOUND is not setCONFIG_AC97_BUS=mCONFIG_HID_SUPPORT=yCONFIG_HID=m
# CONFIG_HID_DEBUG is not set
#
# USB Input Devices
#
# CONFIG_USB_HID is not set
#
# USB HID Boot Protocol drivers
#CONFIG_USB_KBD=mCONFIG_USB_MOUSE=mCONFIG_USB_SUPPORT=yCONFIG_USB_ARCH_HAS_HCD=yCONFIG_USB_ARCH_HAS_OHCI=yCONFIG_USB_ARCH_HAS_EHCI=yCONFIG_USB=m
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
# CONFIG_USB_DEVICEFS is not set
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' #
#
# may also be needed; see USB_STORAGE Help for more information # # CONFIG_USB_STORAGE is not set # CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_MON is not set
#
# USB port drivers
#
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
#
# USB DSL modem support
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not setCONFIG_NEW_LEDS=yCONFIG_LEDS_CLASS=m
#
# LED drivers
#
#
# LED Triggers
#
# CONFIG_LEDS_TRIGGERS is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
#
# Real Time Clock
#
# CONFIG_RTC_CLASS is not set
#
# DMA Engine support
#CONFIG_DMA_ENGINE=y
#
# DMA Clients
#CONFIG_NET_DMA=y
#
# DMA Devices
#CONFIG_INTEL_IOATDMA=m
# CONFIG_VIRTUALIZATION is not set
#
# Userspace I/O
#
# CONFIG_UIO is not set
#
# File systems
#CONFIG_EXT2_FS=mCONFIG_EXT2_FS_XATTR=yCONFIG_EXT2_FS_POSIX_ACL=yCONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not setCONFIG_EXT3_FS=mCONFIG_EXT3_FS_XATTR=yCONFIG_EXT3_FS_POSIX_ACL=yCONFIG_EXT3_FS_SECURITY=yCONFIG_EXT4DEV_FS=mCONFIG_EXT4DEV_FS_XATTR=yCONFIG_EXT4DEV_FS_POSIX_ACL=yCONFIG_EXT4DEV_FS_SECURITY=yCONFIG_JBD=m
# CONFIG_JBD_DEBUG is not setCONFIG_JBD2=m
# CONFIG_JBD2_DEBUG is not setCONFIG_FS_MBCACHE=mCONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not setCONFIG_REISERFS_FS_XATTR=yCONFIG_REISERFS_FS_POSIX_ACL=yCONFIG_REISERFS_FS_SECURITY=y
# CONFIG_JFS_FS is not setCONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not setCONFIG_ROMFS_FS=yCONFIG_INOTIFY=yCONFIG_INOTIFY_USER=yCONFIG_QUOTA=yCONFIG_QFMT_V1=mCONFIG_QFMT_V2=mCONFIG_QUOTACTL=yCONFIG_DNOTIFY=yCONFIG_AUTOFS_FS=mCONFIG_AUTOFS4_FS=mCONFIG_FUSE_FS=mCONFIG_GENERIC_ACL=y
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#CONFIG_PROC_FS=yCONFIG_PROC_KCORE=yCONFIG_PROC_SYSCTL=yCONFIG_SYSFS=yCONFIG_TMPFS=yCONFIG_TMPFS_POSIX_ACL=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not setCONFIG_RAMFS=yCONFIG_CONFIGFS_FS=m
#
# Miscellaneous filesystems
#CONFIG_ADFS_FS=m
# CONFIG_ADFS_FS_RW is not setCONFIG_AFFS_FS=mCONFIG_ECRYPT_FS=mCONFIG_HFS_FS=mCONFIG_HFSPLUS_FS=mCONFIG_BEFS_FS=m
# CONFIG_BEFS_DEBUG is not setCONFIG_BFS_FS=mCONFIG_EFS_FS=mCONFIG_CRAMFS=yCONFIG_VXFS_FS=mCONFIG_HPFS_FS=mCONFIG_QNX4FS_FS=mCONFIG_SYSV_FS=mCONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
#
# Network File Systems
#
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#CONFIG_PARTITION_ADVANCED=yCONFIG_ACORN_PARTITION=y
# CONFIG_ACORN_PARTITION_CUMANA is not set
# CONFIG_ACORN_PARTITION_EESOX is not setCONFIG_ACORN_PARTITION_ICS=y
# CONFIG_ACORN_PARTITION_ADFS is not set
# CONFIG_ACORN_PARTITION_POWERTEC is not setCONFIG_ACORN_PARTITION_RISCIX=yCONFIG_OSF_PARTITION=yCONFIG_AMIGA_PARTITION=yCONFIG_ATARI_PARTITION=yCONFIG_MAC_PARTITION=yCONFIG_MSDOS_PARTITION=yCONFIG_BSD_DISKLABEL=yCONFIG_MINIX_SUBPARTITION=yCONFIG_SOLARIS_X86_PARTITION=yCONFIG_UNIXWARE_DISKLABEL=yCONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not setCONFIG_SGI_PARTITION=yCONFIG_ULTRIX_PARTITION=yCONFIG_SUN_PARTITION=yCONFIG_KARMA_PARTITION=yCONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
#
# Native Language Support
#CONFIG_NLS=yCONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not setCONFIG_NLS_CODEPAGE_852=m
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not setCONFIG_NLS_ASCII=mCONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not setCONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not setCONFIG_NLS_UTF8=m
#
# Distributed Lock Manager
#
# CONFIG_DLM is not setCONFIG_INSTRUMENTATION=y
# CONFIG_PROFILING is not set
# CONFIG_KPROBES is not set
#
# Kernel hacking
#CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not setCONFIG_ENABLE_MUST_CHECK=yCONFIG_MAGIC_SYSRQ=yCONFIG_UNUSED_SYMBOLS=yCONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not setCONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not setCONFIG_DETECT_SOFTLOCKUP=yCONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not setCONFIG_TIMER_STATS=y
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_HIGHMEM is not setCONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_FRAME_POINTER is not set
# CONFIG_FORCED_INLINING is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_FAULT_INJECTION is not setCONFIG_EARLY_PRINTK=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUG_RODATA is not set
# CONFIG_4KSTACKS is not setCONFIG_X86_FIND_SMP_CONFIG=yCONFIG_X86_MPPARSE=yCONFIG_DOUBLEFAULT=y
#
# Security options
#CONFIG_KEYS=y
# CONFIG_KEYS_DEBUG_PROC_KEYS is not setCONFIG_SECURITY=yCONFIG_SECURITY_NETWORK=yCONFIG_SECURITY_NETWORK_XFRM=yCONFIG_SECURITY_CAPABILITIES=y
# CONFIG_SECURITY_ROOTPLUG is not set
# CONFIG_SECURITY_SELINUX is not setCONFIG_XOR_BLOCKS=mCONFIG_ASYNC_CORE=mCONFIG_ASYNC_MEMCPY=mCONFIG_ASYNC_XOR=mCONFIG_CRYPTO=yCONFIG_CRYPTO_ALGAPI=yCONFIG_CRYPTO_BLKCIPHER=mCONFIG_CRYPTO_HASH=yCONFIG_CRYPTO_MANAGER=yCONFIG_CRYPTO_HMAC=yCONFIG_CRYPTO_XCBC=mCONFIG_CRYPTO_NULL=mCONFIG_CRYPTO_MD4=mCONFIG_CRYPTO_MD5=yCONFIG_CRYPTO_SHA1=mCONFIG_CRYPTO_SHA256=mCONFIG_CRYPTO_SHA512=mCONFIG_CRYPTO_WP512=mCONFIG_CRYPTO_TGR192=mCONFIG_CRYPTO_GF128MUL=mCONFIG_CRYPTO_ECB=mCONFIG_CRYPTO_CBC=mCONFIG_CRYPTO_PCBC=mCONFIG_CRYPTO_LRW=m
# CONFIG_CRYPTO_CRYPTD is not setCONFIG_CRYPTO_DES=mCONFIG_CRYPTO_FCRYPT=mCONFIG_CRYPTO_BLOWFISH=mCONFIG_CRYPTO_TWOFISH=mCONFIG_CRYPTO_TWOFISH_COMMON=mCONFIG_CRYPTO_TWOFISH_586=mCONFIG_CRYPTO_SERPENT=mCONFIG_CRYPTO_AES=mCONFIG_CRYPTO_AES_586=mCONFIG_CRYPTO_CAST5=mCONFIG_CRYPTO_CAST6=mCONFIG_CRYPTO_TEA=mCONFIG_CRYPTO_ARC4=mCONFIG_CRYPTO_KHAZAD=mCONFIG_CRYPTO_ANUBIS=mCONFIG_CRYPTO_DEFLATE=mCONFIG_CRYPTO_MICHAEL_MIC=mCONFIG_CRYPTO_CRC32C=mCONFIG_CRYPTO_CAMELLIA=mCONFIG_CRYPTO_TEST=m
# CONFIG_CRYPTO_HW is not set
#
# Library routines
#CONFIG_BITREVERSE=yCONFIG_CRC_CCITT=mCONFIG_CRC16=mCONFIG_CRC_ITU_T=mCONFIG_CRC32=y
# CONFIG_CRC7 is not setCONFIG_LIBCRC32C=mCONFIG_AUDIT_GENERIC=yCONFIG_ZLIB_INFLATE=yCONFIG_ZLIB_DEFLATE=mCONFIG_PLIST=yCONFIG_HAS_IOMEM=yCONFIG_HAS_IOPORT=yCONFIG_HAS_DMA=yCONFIG_GENERIC_HARDIRQS=yCONFIG_GENERIC_IRQ_PROBE=yCONFIG_GENERIC_PENDING_IRQ=yCONFIG_X86_SMP=yCONFIG_X86_HT=yCONFIG_X86_BIOS_REBOOT=yCONFIG_X86_TRAMPOLINE=yCONFIG_KTIME_SCALAR=y
lshw output:
description: Computer
product: System Name
vendor: System Manufacturer
version: System Version
serial: SYS-1234567890
width: 32 bits
capabilities: dmi-2.0
*-core
description: Motherboard
product: TX97-X
vendor: ASUSTeK Computer INC.
physical id: 0
version: REV 2.X
serial: MB-1234567890
slot: LPT
*-firmware
description: BIOS
vendor: Award Software, Inc.
physical id: 0
version: #401A0-0106xl (06/16/97)
size: 64KB
capacity: 64KB
capabilities: isa pci pnp apm upgrade shadowing escd cdboot bootselect socketedrom edd int13floppynec int13floppy360 int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer int10video
*-cpu
description: CPU
product: AMD-K6tm w/ multimedia extensions
vendor: Advanced Micro Devices [AMD]
physical id: 4
bus info: cpu@0
version: 5.6.2
slot: SOCKET 7
size: 200MHz
capacity: 233MHz
width: 32 bits
clock: 66MHz
capabilities: fpu fpu_exception wp vme de pse tsc msr mce cx8 mmx
*-cache
description: L1 cache
physical id: 0
size: 64KB
*-memory
description: System memory
product: EDO DIMM Memory Controller
physical id: 5
size: 32MB
capacity: 384MB
*-bank:0
description: EDO DIMM
physical id: 0
slot: DIMM1-2
size: 32MB
capacity: 32MB
clock: 16MHz (60.0ns)
*-bank:1
description: SIMM [empty]
physical id: 1
slot: DIMM2-1
clock: 16MHz (60.0ns)
*-bank:2
description: SIMM [empty]
physical id: 2
slot: DIMM2-2
clock: 16MHz (60.0ns)
*-bank:3
description: SIMM [empty]
physical id: 3
slot: DIMM3-1
clock: 16MHz (60.0ns)
*-bank:4
description: SIMM [empty]
physical id: 4
slot: DIMM3-2
clock: 16MHz (60.0ns)
*-cache:0
description: L1 cache
physical id: c
slot: L1 Cache
size: 64KB
capacity: 64KB
capabilities: internal write-back
*-cache:1
description: L2 cache
physical id: d
slot: L2 Cache
size: 512KB
capacity: 512KB
capabilities: pipeline-burst external write-back
*-pci
description: Host bridge
product: 430TX - 82439TX MTXC
vendor: Intel Corporation
physical id: 100
bus info: pci@00:00.0
version: 01
width: 32 bits
clock: 33MHz
configuration: latency=32
*-isa
description: ISA bridge
product: 82371AB/EB/MB PIIX4 ISA
vendor: Intel Corporation
physical id: 1
bus info: pci@00:01.0
version: 01
width: 32 bits
clock: 33MHz
capabilities: isa bus_master
configuration: latency=0
*-ide
description: IDE interface
product: 82371AB/EB/MB PIIX4 IDE
vendor: Intel Corporation
physical id: 1.1
bus info: pci@00:01.1
version: 01
width: 32 bits
clock: 33MHz
capabilities: ide bus_master
configuration: driver=PIIX_IDE latency=32
resources: ioport:e000-e00f
*-ide:0
description: IDE Channel 0
physical id: 0
bus info: ide@0
logical name: ide0
clock: 33MHz
*-disk
description: ATA Disk
product: IBM-DJNA-351520
vendor: IBM
physical id: 0
bus info: [email protected]
logical name: /dev/hda
version: J56OA30K
serial: G80GLT9A589
size: 2016MB
capacity: 2016MB
capabilities: ata dma lba iordy smart security pm partitioned partitioned:dos
configuration: mode=udma2 smart=on
*-volume:0
description: Linux swap / Solaris partition
physical id: 1
bus info: [email protected],1
logical name: /dev/hda1
capacity: 486MB
capabilities: primary nofs
*-volume:1
description: Linux filesystem partition
physical id: 2
bus info: [email protected],2
logical name: /dev/hda2
capacity: 964MB
capabilities: primary bootable
*-volume:2
description: Linux filesystem partition
physical id: 3
bus info: [email protected],3
logical name: /dev/hda3
capacity: 564MB
capabilities: primary
*-ide:1
description: IDE Channel 1
physical id: 1
bus info: ide@1
logical name: ide1
clock: 33MHz
*-disk
description: ATA Disk
product: ST340823A
vendor: Seagate
physical id: 1
bus info: [email protected]
logical name: /dev/hdd
version: 3.07
serial: 7EF1EYYG
size: 37GB
capacity: 37GB
capabilities: ata dma lba iordy smart security pm partitioned partitioned:dos
configuration: mode=udma2 smart=on
*-volume:0
description: Linux LVM Physical Volume partition
physical id: 1
bus info: [email protected],1
logical name: /dev/hdd1
serial: YwheMf-s0pv-97XS-sAOB-oGSk-WcHA-ZEo8Ag
size: 9601MB
capacity: 9601MB
capabilities: primary multi lvm2
*-volume:1
description: Linux LVM Physical Volume partition
physical id: 2
bus info: [email protected],2
logical name: /dev/hdd2
serial: TEN6QM-MVlA-LDlO-Moiu-O7mU-VTfZ-pinLz6
size: 15GB
capacity: 15GB
capabilities: primary multi lvm2
*-volume:2
description: Linux LVM Physical Volume partition
physical id: 3
bus info: [email protected],3
logical name: /dev/hdd3
serial: b9Xviu-XSOP-9lz4-4gcY-tE9W-fqxA-k2amBh
size: 12GB
capacity: 12GB
capabilities: primary multi lvm2
*-usb
description: USB Controller
product: 82371AB/EB/MB PIIX4 USB
vendor: Intel Corporation
physical id: 1.2
bus info: pci@00:01.2
version: 01
width: 32 bits
clock: 33MHz
capabilities: uhci bus_master
configuration: driver=uhci_hcd latency=32
resources: ioport:d800-d81f irq:5
*-usbhost
product: UHCI Host Controller
vendor: Linux 2.6.18 uhci_hcd
physical id: 1
bus info: usb@1
logical name: usb1
version: 2.06
capabilities: usb-1.10
configuration: driver=hub maxpower=0mA slots=2 speed=12.0MB/s
*-bridge
description: Bridge
product: 82371AB/EB/MB PIIX4 ACPI
vendor: Intel Corporation
physical id: 1.3
bus info: pci@00:01.3
version: 01
width: 32 bits
clock: 33MHz
capabilities: bridge
configuration: driver=piix4_smbus latency=0
resources: irq:9
*-pcmcia
description: CardBus bridge
product: RL5c475
vendor: Ricoh Co Ltd
physical id: a
bus info: pci@00:0a.0
version: 81
width: 64 bits
clock: 33MHz
capabilities: pcmcia bus_master cap_list
configuration: driver=yenta_cardbus latency=176 maxlatency=5 mingnt=128
resources: iomemory:14010000-14010fff iomemory:b00401000-b00400fff irq:9
*-display
description: VGA compatible controller
product: 86c325 [ViRGE]
vendor: S3 Inc.
physical id: b
bus info: pci@00:0b.0
version: 06
size: 64MB
width: 32 bits
clock: 33MHz
capabilities: vga bus_master
configuration: latency=32 maxlatency=255 mingnt=4
resources: iomemory:e0000000-e3ffffff irq:12
*-network
description: Ethernet interface
product: RTL-8139/8139C/8139C+
vendor: Realtek Semiconductor Co., Ltd.
physical id: c
bus info: pci@00:0c.0
logical name: eth0
version: 10
serial: 00:06:4f:0b:82:02
size: 100MB/s
capacity: 100MB/s
width: 32 bits
clock: 33MHz
capabilities: bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=8139too driverversion=0.9.27 duplex=full ip=85.77.39.121 latency=32 link=yes maxlatency=64 mingnt=32 multicast=yes port=MII speed=100MB/s
resources: ioport:d400-d4ff iomemory:df800000-df8000ff irq:10
Quoted 3 lines · On Thu, 9 Aug 2007 01:31:20 +0300 Mikko Rapeli <[email protected]> wrote:
Since 2.6.23-rc1 I can't boot an old k6 (with a funky IDE drive worth testing with libata). The boot hangs without a sound or letter prints on the screen right after grub, while 2.6.22.1 works fine.
Try adding the `earlyprintk=vga' parameter to the kernel command line?
Quoted 8 lines · Andrew Morton
Quoted 3 lines · On Thu, 9 Aug 2007 01:31:20 +0300 Mikko Rapeli <[email protected]> wrote:
Since 2.6.23-rc1 I can't boot an old k6 (with a funky IDE drive worth testing with libata). The boot hangs without a sound or letter prints on the screen right after grub, while 2.6.22.1 works fine.
Try adding the `earlyprintk=vga' parameter to the kernel command line?
Tried but didn't see anything. I'll try some git snapshots...
-Mikko
Quoted 11 lines · On Thu, 9 Aug 2007 07:57:43 +0300 Mikko Rapeli <[email protected]> wrote:
Quoted 8 lines · Andrew Morton
Quoted 3 lines · On Thu, 9 Aug 2007 01:31:20 +0300 Mikko Rapeli <[email protected]> wrote:
Since 2.6.23-rc1 I can't boot an old k6 (with a funky IDE drive worth testing with libata). The boot hangs without a sound or letter prints on the screen right after grub, while 2.6.22.1 works fine.
Try adding the `earlyprintk=vga' parameter to the kernel command line?
Tried but didn't see anything.
So it died super-early.
Quoted 1 line
I'll try some git snapshots...
That would be good, thanks.
Often such an early crash is due to a config problem. eg: chose the wrong CPU type. So I'd recommend that you triple-check that config, especially under "Processor type and features" before diving into into the bisection hunt.
Quoted 4 lines · Andrew Morton
Often such an early crash is due to a config problem. eg: chose the wrong CPU type. So I'd recommend that you triple-check that config, especially under "Processor type and features" before diving into into the bisection hunt.
Done that many times, but can't see a problem.
boot/config-2.6.23-rc1 renamed from boot/config-2.6.22.1 +58 -135
@@ -1,10 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22.1 -# Sun Aug 5 11:21:34 2007 +# Linux kernel version: 2.6.23-rc1 +# Wed Aug 8 10:21:07 2007 # CONFIG_X86_32=y CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
@@ -37,13 +38,12 @@ CONFIG_LOCALVERSION="" # CONFIG_LOCALVERSION_AUTO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_BSD_PROCESS_ACCT_V3=y # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set +# CONFIG_USER_NS is not set CONFIG_AUDIT=y # CONFIG_AUDITSYSCALL is not set # CONFIG_IKCONFIG is not set
@@ -80,10 +80,6 @@ CONFIG_SLAB=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y
@@ -91,14 +87,11 @@ CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y CONFIG_STOP_MACHINE=y - -# -# Block layer -# CONFIG_BLOCK=y CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set CONFIG_LSF=y +# CONFIG_BLK_DEV_BSG is not set # # IO Schedulers
@@ -116,9 +109,9 @@ CONFIG_DEFAULT_IOSCHED="cfq" # # Processor type and features # -CONFIG_TICK_ONESHOT=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set CONFIG_SMP=y CONFIG_X86_PC=y # CONFIG_X86_ELAN is not set
@@ -129,8 +122,7 @@ CONFIG_X86_PC=y # CONFIG_X86_VISWS is not set # CONFIG_X86_GENERICARCH is not set # CONFIG_X86_ES7000 is not set -CONFIG_PARAVIRT=y -CONFIG_VMI=y +# CONFIG_PARAVIRT is not set # CONFIG_M386 is not set CONFIG_M486=y # CONFIG_M586 is not set
@@ -155,9 +147,9 @@ CONFIG_M486=y # CONFIG_MCYRIXIII is not set # CONFIG_MVIAC3_2 is not set # CONFIG_MVIAC7 is not set -# CONFIG_X86_GENERIC is not set +CONFIG_X86_GENERIC=y CONFIG_X86_CMPXCHG=y -CONFIG_X86_L1_CACHE_SHIFT=4 +CONFIG_X86_L1_CACHE_SHIFT=7 CONFIG_X86_XADD=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set
@@ -170,7 +162,8 @@ CONFIG_X86_INVLPG=y CONFIG_X86_BSWAP=y CONFIG_X86_POPAD_OK=y CONFIG_X86_ALIGNMENT_16=y -CONFIG_X86_MINIMUM_CPU_MODEL=4 +CONFIG_X86_INTEL_USERCOPY=y +CONFIG_X86_MINIMUM_CPU_FAMILY=4 CONFIG_HPET_TIMER=y CONFIG_NR_CPUS=8 CONFIG_SCHED_SMT=y
@@ -199,6 +192,7 @@ CONFIG_X86_CPUID=m CONFIG_EDD=m CONFIG_DELL_RBU=m CONFIG_DCDBAS=m +CONFIG_DMIID=y # CONFIG_NOHIGHMEM is not set CONFIG_HIGHMEM4G=y # CONFIG_HIGHMEM64G is not set
@@ -218,7 +212,9 @@ CONFIG_SPARSEMEM_STATIC=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y CONFIG_NR_QUICK=1 +CONFIG_VIRT_TO_BUS=y # CONFIG_HIGHPTE is not set # CONFIG_MATH_EMULATION is not set CONFIG_MTRR=y
@@ -234,7 +230,7 @@ CONFIG_KEXEC=y CONFIG_PHYSICAL_START=0x100000 # CONFIG_RELOCATABLE is not set CONFIG_PHYSICAL_ALIGN=0x100000 -CONFIG_HOTPLUG_CPU=y +# CONFIG_HOTPLUG_CPU is not set CONFIG_COMPAT_VDSO=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
@@ -308,7 +304,6 @@ CONFIG_ASK_IP_FIB_HASH=y CONFIG_IP_FIB_HASH=y CONFIG_IP_MULTIPLE_TABLES=y CONFIG_IP_ROUTE_MULTIPATH=y -# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set CONFIG_IP_ROUTE_VERBOSE=y # CONFIG_IP_PNP is not set CONFIG_NET_IPIP=m
@@ -406,6 +401,7 @@ CONFIG_IEEE80211_CRYPT_WEP=m # CONFIG_IEEE80211_CRYPT_TKIP is not set # CONFIG_IEEE80211_SOFTMAC is not set # CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers
@@ -420,27 +416,11 @@ CONFIG_FW_LOADER=m # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# CONFIG_CONNECTOR=m # CONFIG_MTD is not set - -# -# Parallel port support -# # CONFIG_PARPORT is not set - -# -# Plug and Play support -# # CONFIG_PNP is not set -# CONFIG_PNPACPI is not set - -# -# Block devices -# +CONFIG_BLK_DEV=y CONFIG_BLK_DEV_FD=m CONFIG_BLK_DEV_XD=m CONFIG_BLK_CPQ_DA=m
@@ -462,12 +442,10 @@ CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set CONFIG_ATA_OVER_ETH=m - -# -# Misc devices -# +CONFIG_MISC_DEVICES=y # CONFIG_IBM_ASM is not set # CONFIG_PHANTOM is not set +# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set CONFIG_TIFM_CORE=m # CONFIG_TIFM_7XX1 is not set
@@ -478,6 +456,7 @@ CONFIG_TIFM_CORE=m # CONFIG_RAID_ATTRS=m CONFIG_SCSI=m +CONFIG_SCSI_DMA=y CONFIG_SCSI_TGT=m CONFIG_SCSI_NETLINK=y CONFIG_SCSI_PROC_FS=y
@@ -508,12 +487,8 @@ CONFIG_SCSI_WAIT_SCAN=m CONFIG_SCSI_SPI_ATTRS=m CONFIG_SCSI_FC_ATTRS=m CONFIG_SCSI_ISCSI_ATTRS=m -CONFIG_SCSI_SAS_ATTRS=m # CONFIG_SCSI_SAS_LIBSAS is not set - -# -# SCSI low-level drivers -# +CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set
@@ -624,15 +599,6 @@ CONFIG_PATA_SIS=m # CONFIG_PATA_VIA is not set CONFIG_PATA_WINBOND=m CONFIG_PATA_WINBOND_VLB=m - -# -# Old CD-ROM drivers (not SCSI, not IDE) -# -# CONFIG_CD_NO_IDESCSI is not set - -# -# Multi-device support (RAID and LVM) -# CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m
@@ -651,6 +617,7 @@ CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m CONFIG_DM_MULTIPATH_EMC=m +# CONFIG_DM_MULTIPATH_RDAC is not set CONFIG_DM_DELAY=m #
@@ -666,19 +633,13 @@ CONFIG_DM_DELAY=m # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set - -# -# I2O device support -# # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set - -# -# Network device support -# CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set CONFIG_DUMMY=m # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set CONFIG_TUN=m # CONFIG_ARCNET is not set
@@ -695,13 +656,10 @@ CONFIG_CICADA_PHY=m CONFIG_VITESSE_PHY=m CONFIG_SMSC_PHY=m CONFIG_BROADCOM_PHY=m +# CONFIG_ICPLUS_PHY is not set CONFIG_FIXED_PHY=m # CONFIG_FIXED_MII_10_FDX is not set # CONFIG_FIXED_MII_100_FDX is not set - -# -# Ethernet (10 or 100Mbit) -# CONFIG_NET_ETHERNET=y CONFIG_MII=m # CONFIG_HAPPYMEAL is not set
@@ -711,10 +669,6 @@ CONFIG_MII=m # CONFIG_LANCE is not set # CONFIG_NET_VENDOR_SMC is not set # CONFIG_NET_VENDOR_RACAL is not set - -# -# Tulip family network device support -# # CONFIG_NET_TULIP is not set # CONFIG_AT1700 is not set # CONFIG_DEPCA is not set
@@ -778,6 +732,7 @@ CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m CONFIG_PPP_MPPE=m CONFIG_PPPOE=m +# CONFIG_PPPOL2TP is not set # CONFIG_SLIP is not set CONFIG_SLHC=m # CONFIG_NET_FC is not set
@@ -785,15 +740,7 @@ CONFIG_SLHC=m # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set #
@@ -801,7 +748,7 @@ CONFIG_SLHC=m # CONFIG_INPUT=y CONFIG_INPUT_FF_MEMLESS=m -# CONFIG_INPUT_POLLDEV is not set +CONFIG_INPUT_POLLDEV=m # # Userland interfaces
@@ -865,6 +812,8 @@ CONFIG_JOYSTICK_STINGER=m CONFIG_JOYSTICK_TWIDJOY=m CONFIG_JOYSTICK_JOYDUMP=m CONFIG_JOYSTICK_XPAD=m +# CONFIG_JOYSTICK_XPAD_FF is not set +# CONFIG_JOYSTICK_XPAD_LEDS is not set CONFIG_INPUT_TABLET=y CONFIG_TABLET_USB_ACECAD=m CONFIG_TABLET_USB_AIPTEK=m
@@ -872,6 +821,7 @@ CONFIG_TABLET_USB_GTCO=m CONFIG_TABLET_USB_KBTAB=m CONFIG_TABLET_USB_WACOM=m CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_FUJITSU is not set CONFIG_TOUCHSCREEN_GUNZE=m CONFIG_TOUCHSCREEN_ELO=m CONFIG_TOUCHSCREEN_MTOUCH=m
@@ -888,6 +838,7 @@ CONFIG_TOUCHSCREEN_USB_ITM=y CONFIG_TOUCHSCREEN_USB_ETURBO=y CONFIG_TOUCHSCREEN_USB_GUNZE=y CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y +CONFIG_TOUCHSCREEN_USB_IRTOUCH=y CONFIG_INPUT_MISC=y CONFIG_INPUT_PCSPKR=m CONFIG_INPUT_WISTRON_BTNS=m
@@ -946,6 +897,7 @@ CONFIG_STALDRV=y # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_FIX_EARLYCON_MEM=y CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_NR_UARTS=16 CONFIG_SERIAL_8250_RUNTIME_UARTS=4
@@ -968,10 +920,6 @@ CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_JSM=m CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set - -# -# IPMI -# CONFIG_IPMI_HANDLER=m # CONFIG_IPMI_PANIC_EVENT is not set CONFIG_IPMI_DEVICE_INTERFACE=m
@@ -1071,10 +1019,6 @@ CONFIG_CS5535_GPIO=m CONFIG_RAW_DRIVER=m CONFIG_MAX_RAW_DEVS=256 CONFIG_HANGCHECK_TIMER=m - -# -# TPM devices -# # CONFIG_TCG_TPM is not set CONFIG_TELCLOCK=m CONFIG_DEVPORT=y
@@ -1111,6 +1055,7 @@ CONFIG_SCx200_ACB=m CONFIG_I2C_SIS5595=m CONFIG_I2C_SIS630=m CONFIG_I2C_SIS96X=m +# CONFIG_I2C_TAOS_EVM is not set CONFIG_I2C_STUB=m CONFIG_I2C_TINY_USB=m CONFIG_I2C_VIA=m
@@ -1123,11 +1068,13 @@ CONFIG_I2C_PCA_ISA=m # CONFIG_SENSORS_DS1337=m CONFIG_SENSORS_DS1374=m +# CONFIG_DS1682 is not set CONFIG_SENSORS_EEPROM=m CONFIG_SENSORS_PCF8574=m CONFIG_SENSORS_PCA9539=m CONFIG_SENSORS_PCF8591=m CONFIG_SENSORS_MAX6875=m +# CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set
@@ -1138,11 +1085,8 @@ CONFIG_SENSORS_MAX6875=m # # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# # CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set #
@@ -1166,8 +1110,8 @@ CONFIG_VIDEO_V4L2=y # Graphics support # CONFIG_BACKLIGHT_LCD_SUPPORT=y -CONFIG_BACKLIGHT_CLASS_DEVICE=y # CONFIG_LCD_CLASS_DEVICE is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y # CONFIG_BACKLIGHT_PROGEAR is not set #
@@ -1179,6 +1123,7 @@ CONFIG_DISPLAY_SUPPORT=m # Display hardware drivers # # CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m # CONFIG_FB is not set #
@@ -1195,10 +1140,7 @@ CONFIG_DUMMY_CONSOLE=y # # CONFIG_SOUND is not set CONFIG_AC97_BUS=m - -# -# HID Devices -# +CONFIG_HID_SUPPORT=y CONFIG_HID=m # CONFIG_HID_DEBUG is not set
@@ -1212,10 +1154,7 @@ CONFIG_HID=m # CONFIG_USB_KBD=m CONFIG_USB_MOUSE=m - -# -# USB support -# +CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y
@@ -1238,6 +1177,7 @@ CONFIG_USB=m # CONFIG_USB_OHCI_HCD is not set # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set # # USB Device Class drivers
@@ -1302,11 +1242,8 @@ CONFIG_USB=m # # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set - -# -# LED devices -# -# CONFIG_NEW_LEDS is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=m # # LED drivers
@@ -1315,15 +1252,8 @@ CONFIG_USB=m # # LED Triggers # - -# -# InfiniBand support -# +# CONFIG_LEDS_TRIGGERS is not set # CONFIG_INFINIBAND is not set - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# # CONFIG_EDAC is not set #
@@ -1345,11 +1275,12 @@ CONFIG_NET_DMA=y # DMA Devices # CONFIG_INTEL_IOATDMA=m +# CONFIG_VIRTUALIZATION is not set # -# Virtualization +# Userspace I/O # -# CONFIG_KVM is not set +# CONFIG_UIO is not set # # File systems
@@ -1456,7 +1387,6 @@ CONFIG_UFS_FS=m # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types
@@ -1535,10 +1465,7 @@ CONFIG_NLS_UTF8=m # Distributed Lock Manager # # CONFIG_DLM is not set - -# -# Instrumentation Support -# +CONFIG_INSTRUMENTATION=y # CONFIG_PROFILING is not set # CONFIG_KPROBES is not set
@@ -1555,6 +1482,7 @@ CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set CONFIG_TIMER_STATS=y # CONFIG_DEBUG_SLAB is not set
@@ -1564,6 +1492,7 @@ CONFIG_TIMER_STATS=y # CONFIG_DEBUG_MUTEXES is not set # CONFIG_DEBUG_LOCK_ALLOC is not set # CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set
@@ -1597,10 +1526,10 @@ CONFIG_SECURITY_NETWORK_XFRM=y CONFIG_SECURITY_CAPABILITIES=y # CONFIG_SECURITY_ROOTPLUG is not set # CONFIG_SECURITY_SELINUX is not set - -# -# Cryptographic options -# +CONFIG_XOR_BLOCKS=m +CONFIG_ASYNC_CORE=m +CONFIG_ASYNC_MEMCPY=m +CONFIG_ASYNC_XOR=m CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=m
@@ -1642,14 +1571,7 @@ CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_CAMELLIA=m CONFIG_CRYPTO_TEST=m - -# -# Hardware crypto devices -# -CONFIG_CRYPTO_DEV_PADLOCK=m -CONFIG_CRYPTO_DEV_PADLOCK_AES=m -CONFIG_CRYPTO_DEV_PADLOCK_SHA=m -CONFIG_CRYPTO_DEV_GEODE=m +# CONFIG_CRYPTO_HW is not set # # Library routines
@@ -1659,6 +1581,7 @@ CONFIG_CRC_CCITT=m CONFIG_CRC16=m CONFIG_CRC_ITU_T=m CONFIG_CRC32=y +# CONFIG_CRC7 is not set CONFIG_LIBCRC32C=m CONFIG_AUDIT_GENERIC=y CONFIG_ZLIB_INFLATE=y
Quoted 6 lines · Mikko Rapeli
Hello,
Since 2.6.23-rc1 I can't boot an old k6 (with a funky IDE drive worth testing with libata). The boot hangs without a sound or letter prints on the screen right after grub, while 2.6.22.1 works fine.
So it's not printing "Uncompressing kernel... " at all?
Quoted 2 lines
Is my .config broken in ways I can't see, or is this perhaps regression?
It might be an issue with the new setup code. What happens if you append "vga=ask" to the kernel command line?
-hpa
Quoted 1 line · H. Peter Anvin
So it's not printing "Uncompressing kernel... " at all?
Yes, nothing comes up. Machine responds to three-finger-salute and numlock status can be changed, though.
Quoted 2 lines
It might be an issue with the new setup code. What happens if you append "vga=ask" to the kernel command line?
I'll try later today.
-Mikko
Quoted 2 lines · H. Peter Anvin
It might be an issue with the new setup code. What happens if you append "vga=ask" to the kernel command line?
I get to choose the vga mode but nothing visible happens after that. This seems like regression since even 2.6.23-rc2 from Debian experimental (2.6.23~rc2-1~experimental.1~snapshot.9254) hangs the same way. I've tried -git's upto 2.6.22-git5 which fails too.
Which patch included this new setup code?
-Mikko
As I could guess from the changelogs, 2.6.22-git2 works and anything after 2.6.22-git3 doesn't.
-Mikko
Quoted 2 lines · Mikko Rapeli
As I could guess from the changelogs, 2.6.22-git2 works and anything after 2.6.22-git3 doesn't.
Okay, here is something to try. Don't try this unless you haven't already tested 2.6.23-rc2, since there is a bug that was fixed in 2.6.23-rc2 that might be the cause of your problem (you can test that easily by specifying edd=skipmbr on the kernel command line.)
Anyway, if that doesn't solve it:
In main() in arch/i386/boot/main.c, please comment out everything from query_mca() to query_edd(), inclusively.
-hpa
Quoted 8 lines · H. Peter Anvin
Quoted 2 lines · Mikko Rapeli
As I could guess from the changelogs, 2.6.22-git2 works and anything after 2.6.22-git3 doesn't.
Okay, here is something to try. Don't try this unless you haven't already tested 2.6.23-rc2, since there is a bug that was fixed in 2.6.23-rc2 that might be the cause of your problem (you can test that easily by specifying edd=skipmbr on the kernel command line.)
Nice, 2.6.23-rc2 with edd=skipmbr boots just fine.
Quoted 4 lines
Anyway, if that doesn't solve it:
In
main()inarch/i386/boot/main.c, please comment out everything fromquery_mca()toquery_edd(), inclusively.
This didn't help.
-Mikko
Quoted 10 lines · Mikko Rapeli
Nice, 2.6.23-rc2 with edd=skipmbr boots just fine.
Quoted 4 lines
Anyway, if that doesn't solve it:
In
main()inarch/i386/boot/main.c, please comment out everything fromquery_mca()toquery_edd(), inclusively.This didn't help.
Let me get this straight... "edd=skipmbr" boots fine, but commenting out the call to query_edd() didn't? Could you please try that (and, I guess, only that), and make sure everything necessary is rebuild.
2.6.23-*rc2* you say boots fine with "edd=skipmbr", but not without? Did you try the above commenting-out on rc2?
Just don't want to be chasing ghosts.
-hpa
Quoted 5 lines · H. Peter Anvin
Let me get this straight... "edd=skipmbr" boots fine, but commenting out the call to
query_edd()didn't? Could you please try that (and, I guess, only that), and make sure everything necessary is rebuild.2.6.23-*rc2* you say boots fine with "edd=skipmbr", but not without?
Yes, vanilla 2.6.23-rc2 with edd=skipmbr boots fine.
Quoted 1 line
Did you try the above commenting-out on rc2?
Yes, didn't work with 2.6.23-rc2 but printed one dot in the upper left corner after grub stuff.
Quoted 1 line
Just don't want to be chasing ghosts.
I've bisected thus far, if it helps:
$ git-bisect log git-bisect start # good: [4eb6bf6bfb580afaf1e1a1d30cba17a078530cf4] # lots-of-architectures: enable arbitary speed tty support git-bisect good 4eb6bf6bfb580afaf1e1a1d30cba17a078530cf4 # bad: [773208946a132fb733ba273ee8562814f828cc28] Revert "USB: fix # gregkh-usb-usb-use-menuconfig-objects" git-bisect bad 773208946a132fb733ba273ee8562814f828cc28 # bad: [dc690d8ef842b464f1c429a376ca16cb8dbee6ae] Merge # master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6 git-bisect bad dc690d8ef842b464f1c429a376ca16cb8dbee6ae
-Mikko
Quoted 8 lines · Mikko Rapeli
Quoted 5 lines · H. Peter Anvin
Let me get this straight... "edd=skipmbr" boots fine, but commenting out the call to
query_edd()didn't? Could you please try that (and, I guess, only that), and make sure everything necessary is rebuild.2.6.23-*rc2* you say boots fine with "edd=skipmbr", but not without?
Yes, vanilla 2.6.23-rc2 with edd=skipmbr boots fine.
Could you please describe your hardware configuration, in particular:
- what BIOS are you using;
- what disks, floppies, CD-ROMs, USB drives, etc are in your system;
- are any of them RAIDed;
- what device and bootloader are you using for boot.
-hpa
Quoted 1 line · H. Peter Anvin
Could you please describe your hardware configuration, in particular:
In http://marc.info/?l=linux-kernel&m=118661306932149&w=2 but here again:
Quoted 1 line
- what BIOS are you using;
*-firmware
description: BIOS
vendor: Award Software, Inc.
physical id: 0
version: #401A0-0106xl (06/16/97)
size: 64KB
capacity: 64KB
capabilities: isa pci pnp apm upgrade shadowing escd cdboot
bootselec socketedrom edd int13floppynec int13floppy360 int13floppy1200 int13floppy720 \
int13floppy2880 int5printscreen int9keyboard int14serial int17p int10video
Quoted 1 line
- what disks, floppies, CD-ROMs, USB drives, etc are in your system;
*-ide
description: IDE interface
product: 82371AB/EB/MB PIIX4 IDE
vendor: Intel Corporation
physical id: 1.1
bus info: pci@00:01.1
version: 01
width: 32 bits
clock: 33MHz
capabilities: ide bus_master
configuration: driver=PIIX_IDE latency=32
resources: ioport:e000-e00f
*-ide:0
description: IDE Channel 0
physical id: 0
bus info: ide@0
logical name: ide0
clock: 33MHz
*-disk
description: ATA Disk
product: IBM-DJNA-351520
vendor: IBM
physical id: 0
bus info: [email protected]
logical name: /dev/hda
version: J56OA30K
serial: G80GLT9A589
size: 2016MB
capacity: 2016MB
capabilities: ata dma lba iordy smart security pm
partitioned
partitioned:dos
configuration: mode=udma2 smart=on
*-volume:0
description: Linux swap / Solaris partition physical id: 1
bus info: [email protected],1
logical name: /dev/hda1
capacity: 486MB
capabilities: primary nofs
*-volume:1
description: Linux filesystem partition physical id: 2
bus info: [email protected],2
logical name: /dev/hda2
capacity: 964MB
capabilities: primary bootable
*-volume:2
description: Linux filesystem partition physical id: 3
bus info: [email protected],3
logical name: /dev/hda3
capacity: 564MB
capabilities: primary
*-ide:1
description: IDE Channel 1
physical id: 1
bus info: ide@1
logical name: ide1
clock: 33MHz
*-disk
description: ATA Disk
product: ST340823A
vendor: Seagate
physical id: 1
bus info: [email protected]
logical name: /dev/hdd
version: 3.07
serial: 7EF1EYYG
size: 37GB
capacity: 37GB
capabilities: ata dma lba iordy smart security pm
partitioned
partitioned:dos
configuration: mode=udma2 smart=on
*-volume:0
description: Linux LVM Physical Volume partition physical id: 1
bus info: [email protected],1
logical name: /dev/hdd1
serial: YwheMf-s0pv-97XS-sAOB-oGSk-WcHA-ZEo8Ag
size: 9601MB
capacity: 9601MB
capabilities: primary multi lvm2
*-volume:1
description: Linux LVM Physical Volume partition physical id: 2
bus info: [email protected],2
logical name: /dev/hdd2
serial: TEN6QM-MVlA-LDlO-Moiu-O7mU-VTfZ-pinLz6
size: 15GB
capacity: 15GB
capabilities: primary multi lvm2
*-volume:2
description: Linux LVM Physical Volume partition physical id: 3
bus info: [email protected],3
logical name: /dev/hdd3
serial: b9Xviu-XSOP-9lz4-4gcY-tE9W-fqxA-k2amBh
size: 12GB
capacity: 12GB
capabilities: primary multi lvm2
Quoted 1 line
- are any of them RAIDed;
No.
Quoted 1 line
- what device and bootloader are you using for boot.
The first disk, IBM-DJNA-351520, and grub 0.97-27 from Debian:
title Debian GNU/Linux, kernel 2.6.23-rc2
root (hd0,1)
kernel /boot/vmlinuz-2.6.23-rc2 root=/dev/hda2 ro
initrd /boot/initrd.img-2.6.23-rc2
savedefault
Quoted 5 lines · Mikko Rapeli
Quoted 4 lines · H. Peter Anvin
Let me get this straight... "edd=skipmbr" boots fine, but commenting out the call to
query_edd()didn't? Could you please try that (and, I guess, only that), and make sure everything necessary is rebuild.
Quoted 8 lines
Quoted 1 line
2.6.23-*rc2* you say boots fine with "edd=skipmbr", but not without?
Yes, vanilla 2.6.23-rc2 with edd=skipmbr boots fine.
Quoted 1 line
Did you try the above commenting-out on rc2?
Yes, didn't work with 2.6.23-rc2 but printed one dot in the upper left corner after grub stuff.
Oops, I was wrong and bad enough to think nesting #ifdef's would work; 2.6.23-rc2 with query_mca() to query_edd() in arch/i386/boot/main.c commented out works.
Sorry about that one.
-Mikko
Quoted 7 lines · Mikko Rapeli
Oops, I was wrong and bad enough to think nesting #ifdef's would work; 2.6.23-rc2 with
query_mca()toquery_edd()inarch/i386/boot/main.ccommented out works.Sorry about that one.
OK, good. That would be consistent with the current analysis.
Let me know what you get out of the test patch I sent.
-hpa
Quoted 1 line · Mikko Rapeli
I've bisected thus far, if it helps:
Bisect came to this conclusion:
git-bisect start
# good: [4eb6bf6bfb580afaf1e1a1d30cba17a078530cf4] lots-of-architectures: enable arbitary speed tty support git-bisect good 4eb6bf6bfb580afaf1e1a1d30cba17a078530cf4
# bad: [773208946a132fb733ba273ee8562814f828cc28] Revert "USB: fix gregkh-usb-usb-use-menuconfig-objects" git-bisect bad 773208946a132fb733ba273ee8562814f828cc28
# bad: [dc690d8ef842b464f1c429a376ca16cb8dbee6ae] Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6 git-bisect bad dc690d8ef842b464f1c429a376ca16cb8dbee6ae
# good: [15028aad00ddf241581fbe74a02ec89cbb28d35d] [TG3]: Update version to 3.78.
git-bisect good 15028aad00ddf241581fbe74a02ec89cbb28d35d
# bad: [82afee684fe3badaf5ee3fc5b6fda687d558bfb5] Merge master.kernel.org:/pub/scm/linux/kernel/git/cooloney/blackfin-2.6 git-bisect bad 82afee684fe3badaf5ee3fc5b6fda687d558bfb5
# bad: [c39736823232bc3ca113c8228fa852c09fba300e] Remove old i386 setup code
git-bisect bad c39736823232bc3ca113c8228fa852c09fba300e
# good: [5be865661516263d90317a6b35b588a2d7c3cb55] String-handling functions for the new x86 setup code. git-bisect good 5be865661516263d90317a6b35b588a2d7c3cb55
# good: [3b53d3045bbb8ea3c9dce663b102eab0903817c5] MCA support for new x86 setup code
git-bisect good 3b53d3045bbb8ea3c9dce663b102eab0903817c5
# good: [7052fdd890bda0b3904674b69a1d24aec0a10d67] Code for actual protected-mode entry
git-bisect good 7052fdd890bda0b3904674b69a1d24aec0a10d67
# good: [f2d98ae63dc64dedb00499289e13a50677f771f9] Linker script for the new x86 setup code git-bisect good f2d98ae63dc64dedb00499289e13a50677f771f9
# bad: [91a6c462b02d8dc02dbe95e5a407d78078a38d01] Use the new x86 setup code for x86-64; unify with i386 git-bisect bad 91a6c462b02d8dc02dbe95e5a407d78078a38d01
# bad: [4fd06960f120e02e9abc802a09f9511c400042a5] Use the new x86 setup code for i386
git-bisect bad 4fd06960f120e02e9abc802a09f9511c400042a5