ARM: OMAP: Remove unnecessary N800 PM board specific file

Index: linux-omap/arch/arm/mach-omap2/board-n800-pm.c
===================================================================
@@ -1,79 +0,0 @@
-/*
- * Nokia N800 PM code
- *
- * Copyright (C) 2006 Nokia Corporation
- * Author: Amit Kucheria <[email protected]>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <asm/arch/menelaus.h>
-
-#ifdef CONFIG_MENELAUS
-
-static int n800_auto_sleep_regulators(void)
-{
-	u32 val;
-	int ret;
-
-	val = EN_VPLL_SLEEP | EN_VMMC_SLEEP    \
-		| EN_VAUX_SLEEP | EN_VIO_SLEEP \
-		| EN_VMEM_SLEEP | EN_DC3_SLEEP \
-		| EN_VC_SLEEP | EN_DC2_SLEEP;
-
-	ret = menelaus_set_regulator_sleep(1, val);
-	if (ret < 0) {
-		printk(KERN_ERR "Could not set regulators to sleep on "
-			"menelaus: %u\n", ret);
-		return ret;
-	}
-	return 0;
-}
-
-static int n800_auto_voltage_scale(void)
-{
-	int ret;
-
-	ret = menelaus_set_vcore_hw(1400, 1050);
-	if (ret < 0) {
-		printk(KERN_ERR "Could not set VCORE voltage on "
-			"menelaus: %u\n", ret);
-		return ret;
-	}
-	return 0;
-}
-
-static int n800_menelaus_init(struct device *dev)
-{
-	int ret;
-
-	ret = n800_auto_voltage_scale();
-	if (ret < 0)
-		return ret;
-	ret = n800_auto_sleep_regulators();
-	if (ret < 0)
-		return ret;
-	return 0;
-}
-
-static struct menelaus_platform_data n800_menelaus_platform_data = {
-	.late_init = n800_menelaus_init,
-};
-
-void __init n800_pm_init(void)
-{
-	menelaus_set_platform_data(&n800_menelaus_platform_data);
-}
-
-#else
-
-void __init n800_pm_init(void)
-{
-}
-
-#endif
-