x86: make io-apic not connected pin print complete
PATCH 1/1 x86: make io-apic not connected pin print complete
[PATCH] x86: make io-apic not connected pin print complete
normally will have two segment not connected pin
pin0, and pin after 15...
so need to print out "not connected\n" for previous segment, before print out connected pins info...
Signed-off-by Yinghai Lu <[email protected]>
arch/x86_64/kernel/io_apic.c +5 -1
@@ -874,6 +874,10 @@ static void __init setup_IO_APIC_irqs(void)apic_printk (APIC_VERBOSE ,", %d-%d" , mp_ioapics[apic].mpc_apicid, pin);continue ; } +if (!first_notcon) { +apic_printk (APIC_VERBOSE ," not connected.\n" ); + first_notcon =1 ; + } irq =pin_2_irq (idx, apic, pin);add_pin_to_irq (irq, apic, pin);
@@ -884,7 +888,7 @@ static void __init setup_IO_APIC_irqs(void) }if (!first_notcon) -apic_printk (APIC_VERBOSE ," not connected.\n" ); +apic_printk (APIC_VERBOSE ," not connected.\n" ); }/*
arch/i386/kernel/io_apic.c +5 -0
@@ -1301,6 +1301,11 @@ static void __init setup_IO_APIC_irqs(void)continue ; } +if (!first_notcon) { +apic_printk (APIC_VERBOSE ," not connected.\n" ); + first_notcon =1 ; + } + entry.trigger =irq_trigger (idx); entry.polarity =irq_polarity (idx);