Fix section mismatch in the Adaptec DPT SCSI Raid driver
PATCH 1/1 Fix section mismatch in the Adaptec DPT SCSI Raid driver
Fix section mismatch in the Adaptec DPT SCSI Raid driver.
drivers/scsi/dpt_i2o.c +1 -1
@@ -3351,7 +3351,7 @@return count >0 ?0 : -ENODEV ; } -static void __exit adpt_exit(void) +static void adpt_exit (void ) {while (hba_chain)adpt_release (hba_chain);
Quoted 9 lines · On Fri, 17 Aug 2007 16:51:15 -0400 Joe Korty <[email protected]> wrote:
Fix section mismatch in the Adaptec DPT SCSI Raid driver.
Signed-off-by Joe Korty <[email protected]>Index:
2.6.23-rc3-git1/drivers/scsi/dpt_i2o.c
===================================================================
drivers/scsi/dpt_i2o.c line 3357
Quoted 8 lines
drivers/scsi/dpt_i2o.c +1
-1@@ -3351,7 +3351,7 @@return count >0 ?0 : -ENODEV ; } -static void __exit adpt_exit(void) +static void adpt_exit (void ) {while (hba_chain)adpt_release (hba_chain);
Please always provide at least a copy of the error message when providing patches which fix warnings, or build errors, or section mismatches.
For section mismatches, an analysis of what caused the problem would help, too. It saves others from having to do the same thing.
In this case, I'd need to see what error is being fixed so that I can judge the seriousness of the problem. In this case I don't _think_ it'll be terribly serious because iirc most architectures don't free exitcall memory.
Quoted 9 lines · Andrew Morton
Please always provide at least a copy of the error message when providing patches which fix warnings, or build errors, or section mismatches.
For section mismatches, an analysis of what caused the problem would help, too. It saves others from having to do the same thing.
In this case, I'd need to see what error is being fixed so that I can judge the seriousness of the problem. In this case I don't _think_ it'll be terribly serious because iirc most architectures don't free exitcall memory.
Fix section mismatch in the Adaptec DPT SCSI Raid driver.
WARNING: vmlinux.o(.init.text+0x1fcd2): Section mismatch:
reference to .exit.text:adpt_exit (between 'adpt_init' and 'ahc_linux_init')
This warning is due to adaptec device detection calling the exit routine on failure to properly register the adaptec device.
The exit routine + call was added on July 30 by
Commit: 55d9fcf57ba5ec427544fca7abc335cf3da78160
Author: Matthew Wilcox
Subject: [SCSI] dpt_i2o: convert to SCSI hotplug model.
Mathew: isn't a module exit routine a little too strong to be calling on the failure of a single device? Module exit implies that other, non-failing adaptec raid devices will also get shut down.
drivers/scsi/dpt_i2o.c +1 -1
@@ -3351,7 +3351,7 @@return count >0 ?0 : -ENODEV ; } -static void __exit adpt_exit(void) +static void adpt_exit (void ) {while (hba_chain)adpt_release (hba_chain);