AR7 port

Hi,
I made a diff for the AR7 port, hoping that it will go in the mainstream kernel.
I cared about don't including buggy or non free drivers and code. Also we have to surround the code in arch/mips/kernel/traps.c by some #ifdef since
the actual code will break other archs.
The code was taken from the OpenWrt project, is quite good, many people uses it daily.

Cheers

diff -urN linux-2.6.22.1/arch/mips/ar7/clock.c linux-ar7/arch/mips/ar7/clock.c
@@ -0,0 +1,472 @@
+/*
+ * $Id: clock.c 8036 2007-07-18 13:42:24Z florian $
+ * 
+ * Copyright (C) 2007 OpenWrt.org
+ * 
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ * 
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <asm/addrspace.h>
+#include <asm/io.h>
+#include <asm/ar7/ar7.h>
+
+#define BOOT_PLL_SOURCE_MASK 0x3
+#define CPU_PLL_SOURCE_SHIFT 16
+#define BUS_PLL_SOURCE_SHIFT 14
+#define USB_PLL_SOURCE_SHIFT 18
+#define DSP_PLL_SOURCE_SHIFT 22
+#define BOOT_PLL_SOURCE_AFE 0
+#define BOOT_PLL_SOURCE_BUS 0
+#define BOOT_PLL_SOURCE_REF 1
+#define BOOT_PLL_SOURCE_XTAL 2
+#define BOOT_PLL_SOURCE_CPU 3
+#define BOOT_PLL_BYPASS 0x00000020
+#define BOOT_PLL_ASYNC_MODE 0x02000000
+#define BOOT_PLL_2TO1_MODE 0x00008000
+
+#define TNETD7200_CLOCK_ID_CPU 0
+#define TNETD7200_CLOCK_ID_DSP 1
+#define TNETD7200_CLOCK_ID_USB 2
+
+#define TNETD7200_DEF_CPU_CLK 211000000
+#define TNETD7200_DEF_DSP_CLK 125000000
+#define TNETD7200_DEF_USB_CLK 48000000
+
+struct tnetd7300_clock {
+	volatile u32 ctrl;
+#define PREDIV_MASK 0x001f0000
+#define PREDIV_SHIFT 16
+#define POSTDIV_MASK 0x0000001f
+	u32 unused1[3];
+	volatile u32 pll;
+#define MUL_MASK 0x0000f000
+#define MUL_SHIFT 12
+#define PLL_MODE_MASK 0x00000001
+#define PLL_NDIV 0x00000800
+#define PLL_DIV 0x00000002
+#define PLL_STATUS 0x00000001
+	u32 unused2[3];
+} __attribute__ ((packed));
+
+struct tnetd7300_clocks {
+	struct tnetd7300_clock bus;
+	struct tnetd7300_clock cpu;
+	struct tnetd7300_clock usb;
+	struct tnetd7300_clock dsp;
+} __attribute__ ((packed));
+
+struct tnetd7200_clock {
+	volatile u32 ctrl;
+	u32 unused1[3];
+#define DIVISOR_ENABLE_MASK 0x00008000
+	volatile u32 mul;
+	volatile u32 prediv;
+	volatile u32 postdiv;
+	volatile u32 postdiv2;
+	u32 unused2[6];
+	volatile u32 cmd;
+	volatile u32 status;
+	volatile u32 cmden;
+	u32 padding[15];
+} __attribute__ ((packed));
+
+struct tnetd7200_clocks {
+	struct tnetd7200_clock cpu;
+	struct tnetd7200_clock dsp;
+	struct tnetd7200_clock usb;
+} __attribute__ ((packed));
+
+int ar7_afe_clock = 35328000;
+int ar7_ref_clock = 25000000;
+int ar7_xtal_clock = 24000000;
+
+int ar7_cpu_clock = 150000000;
+EXPORT_SYMBOL(ar7_cpu_clock);
+int ar7_bus_clock = 125000000;
+EXPORT_SYMBOL(ar7_bus_clock);
+int ar7_dsp_clock = 0;
+EXPORT_SYMBOL(ar7_dsp_clock);
+
+static int gcd(int x, int y)
+{
+	if (x > y)
+		return (x % y) ? gcd(y, x % y) : y;
+	return (y % x) ? gcd(x, y % x) : x;
+}
+
+static inline int ABS(int x)
+{
+	return (x >= 0) ? x : -x;
+}
+
+static void approximate(int base, int target, int *prediv,
+			int *postdiv, int *mul)
+{
+	int i, j, k, freq, res = target;
+	for (i = 1; i <= 16; i++) {
+		for (j = 1; j <= 32; j++) {
+			for (k = 1; k <= 32; k++) {
+				freq = ABS(base / j * i / k - target);
+				if (freq < res) {
+					res = freq;
+					*mul = i;
+					*prediv = j;
+					*postdiv = k;
+				}
+			}
+		}
+	}
+}
+
+static void calculate(int base, int target, int *prediv, int *postdiv,
+		      int *mul)
+{
+	int tmp_gcd, tmp_base, tmp_freq;
+
+	for (*prediv = 1; *prediv <= 32; (*prediv)++) {
+		tmp_base = base / *prediv;
+		tmp_gcd = gcd(target, tmp_base);
+		*mul = target / tmp_gcd;
+		*postdiv = tmp_base / tmp_gcd;
+		if ((*mul < 1) || (*mul >= 16))
+			continue;
+		if ((*postdiv > 0) & (*postdiv <= 32))
+			break;
+	}
+
+	if (base / (*prediv) * (*mul) / (*postdiv) != target) {
+		approximate(base, target, prediv, postdiv, mul);
+		tmp_freq = base / (*prediv) * (*mul) / (*postdiv);
+		printk(KERN_WARNING
+		       "Adjusted requested frequency %d to %d\n",
+		       target, tmp_freq);
+	}
+
+	printk(KERN_DEBUG "Clocks: prediv: %d, postdiv: %d, mul: %d\n",
+	       *prediv, *postdiv, *mul);
+}
+
+static int tnetd7300_dsp_clock(void)
+{
+	u32 didr1, didr2;
+	u8 rev = ar7_chip_rev();
+	didr1 = readl((void *)KSEG1ADDR(AR7_REGS_GPIO + 0x18));
+	didr2 = readl((void *)KSEG1ADDR(AR7_REGS_GPIO + 0x1c));
+	if (didr2 & (1 << 23))
+		return 0;
+	if ((rev >= 0x23) && (rev != 0x57))
+		return 250000000;
+	if ((((didr2 & 0x1fff) << 10) | ((didr1 & 0xffc00000) >> 22))
+	    > 4208000)
+		return 250000000;
+	return 0;
+}
+
+static int tnetd7300_get_clock(u32 shift, struct tnetd7300_clock *clock,
+			       u32 *bootcr, u32 bus_clock)
+{
+	int product;
+	int base_clock = ar7_ref_clock;
+	u32 ctrl = clock->ctrl;
+	u32 pll = clock->pll;
+	int prediv = ((ctrl & PREDIV_MASK) >> PREDIV_SHIFT) + 1;
+	int postdiv = (ctrl & POSTDIV_MASK) + 1;
+	int divisor = prediv * postdiv;
+	int mul = ((pll & MUL_MASK) >> MUL_SHIFT) + 1;
+
+	switch ((*bootcr & (BOOT_PLL_SOURCE_MASK << shift)) >> shift) {
+	case BOOT_PLL_SOURCE_BUS:
+		base_clock = bus_clock;
+		break;
+	case BOOT_PLL_SOURCE_REF:
+		base_clock = ar7_ref_clock;
+		break;
+	case BOOT_PLL_SOURCE_XTAL:
+		base_clock = ar7_xtal_clock;
+		break;
+	case BOOT_PLL_SOURCE_CPU:
+		base_clock = ar7_cpu_clock;
+		break;
+	}
+
+	if (*bootcr & BOOT_PLL_BYPASS)
+		return base_clock / divisor;
+
+	if ((pll & PLL_MODE_MASK) == 0)
+		return (base_clock >> (mul / 16 + 1)) / divisor;
+
+	if ((pll & (PLL_NDIV | PLL_DIV)) == (PLL_NDIV | PLL_DIV)) {
+		product = (mul & 1) ? 
+			(base_clock * mul) >> 1 :
+			(base_clock * (mul - 1)) >> 2;
+		return product / divisor;
+	}
+
+	if (mul == 16)
+		return base_clock / divisor;
+
+	return base_clock * mul / divisor;
+}
+
+static void tnetd7300_set_clock(u32 shift, struct tnetd7300_clock *clock,
+				u32 *bootcr, u32 frequency)
+{
+	u32 status;
+	int prediv, postdiv, mul;
+	int base_clock = ar7_bus_clock;
+
+	switch ((*bootcr & (BOOT_PLL_SOURCE_MASK << shift)) >> shift) {
+	case BOOT_PLL_SOURCE_BUS:
+		base_clock = ar7_bus_clock;
+		break;
+	case BOOT_PLL_SOURCE_REF:
+		base_clock = ar7_ref_clock;
+		break;
+	case BOOT_PLL_SOURCE_XTAL:
+		base_clock = ar7_xtal_clock;
+		break;
+	case BOOT_PLL_SOURCE_CPU:
+		base_clock = ar7_cpu_clock;
+		break;
+	}
+
+	calculate(base_clock, frequency, &prediv, &postdiv, &mul);
+
+	clock->ctrl = ((prediv - 1) << PREDIV_SHIFT) | (postdiv - 1);
+	mdelay(1);
+	clock->pll = 4;
+	do {
+		status = clock->pll;
+	} while (status & PLL_STATUS);
+	clock->pll = ((mul - 1) << MUL_SHIFT) | (0xff << 3) | 0x0e;
+	mdelay(75);
+}
+
+static void __init tnetd7300_init_clocks(void)
+{
+	u32 *bootcr = (u32 *)ioremap_nocache(AR7_REGS_DCL, 4);
+	struct tnetd7300_clocks *clocks = (struct tnetd7300_clocks 

*)ioremap_nocache(AR7_REGS_POWER + 0x20, sizeof(struct tnetd7300_clocks)); +
+ ar7_bus_clock = tnetd7300_get_clock(BUS_PLL_SOURCE_SHIFT,
+ &clocks->bus, bootcr,
+ ar7_afe_clock);
+
+ if (*bootcr & BOOT_PLL_ASYNC_MODE) {
+ ar7_cpu_clock = tnetd7300_get_clock(CPU_PLL_SOURCE_SHIFT,
+ &clocks->cpu,
+ bootcr, ar7_afe_clock);
+ } else {
+ ar7_cpu_clock = ar7_bus_clock;
+ }
+
+ tnetd7300_set_clock(USB_PLL_SOURCE_SHIFT, &clocks->usb,
+ bootcr, 48000000);
+
+ if (ar7_dsp_clock == 250000000)
+ tnetd7300_set_clock(DSP_PLL_SOURCE_SHIFT, &clocks->dsp,
+ bootcr, ar7_dsp_clock);
+
+ iounmap(clocks);
+ iounmap(bootcr);
+}
+
+static int tnetd7200_get_clock(int base, struct tnetd7200_clock *clock,
+ u32 *bootcr, u32 bus_clock)
+{
+ int divisor = ((clock->prediv & 0x1f) + 1) *
+ ((clock->postdiv & 0x1f) + 1);
+
+ if (*bootcr & BOOT_PLL_BYPASS)
+ return base / divisor;
+
+ return base * ((clock->mul & 0xf) + 1) / divisor;
+}
+
+
+static void tnetd7200_set_clock(int base, struct tnetd7200_clock *clock,
+ int prediv, int postdiv, int postdiv2, int mul, u32 frequency)
+{
+ printk("Clocks: base = %d, frequency = %u, prediv = %d, postdiv = %d,
postdiv2 = %d, mul = %d\n",
+ base, frequency, prediv, postdiv, postdiv2, mul);
+
+ clock->ctrl = 0;
+ clock->prediv = DIVISOR_ENABLE_MASK | ((prediv - 1) & 0x1F);
+ clock->mul = ((mul - 1) & 0xF);
+
+ for(mul = 0; mul < 2000; mul++) /* nop */;
+
+ while(clock->status & 0x1) /* nop */;
+
+ clock->postdiv = DIVISOR_ENABLE_MASK | ((postdiv - 1) & 0x1F);
+
+ clock->cmden |= 1;
+ clock->cmd |= 1;
+
+ while(clock->status & 0x1) /* nop */;
+
+ clock->postdiv2 = DIVISOR_ENABLE_MASK | ((postdiv2 - 1) & 0x1F);
+
+ clock->cmden |= 1;
+ clock->cmd |= 1;
+
+ while(clock->status & 0x1) /* nop */;
+
+ clock->ctrl |= 1;
+}
+
+static int tnetd7200_get_clock_base(int clock_id, u32 *bootcr) +{
+ if (*bootcr & BOOT_PLL_ASYNC_MODE) {

+        // Async
+        switch (clock_id) {
+        case TNETD7200_CLOCK_ID_DSP:

+ return ar7_ref_clock;
+ default:
+ return ar7_afe_clock;
+ }
+ } else {
+ // Sync
+ if (*bootcr & BOOT_PLL_2TO1_MODE) {

+            // 2:1
+            switch (clock_id) {
+            case TNETD7200_CLOCK_ID_DSP:

+ return ar7_ref_clock;
+ default:
+ return ar7_afe_clock;
+ }
+ } else {
+ // 1:1
+ return ar7_ref_clock;
+ }
+ }
+}
+
+
+static void __init tnetd7200_init_clocks(void)
+{
+ u32 *bootcr = (u32 *)ioremap_nocache(AR7_REGS_DCL, 4);
+ struct tnetd7200_clocks *clocks = (struct tnetd7200_clocks
*)ioremap_nocache(AR7_REGS_POWER + 0x80, sizeof(struct tnetd7200_clocks));

+    int cpu_base, cpu_mul, cpu_prediv, cpu_postdiv;
+    int dsp_base, dsp_mul, dsp_prediv, dsp_postdiv;
+    int usb_base, usb_mul, usb_prediv, usb_postdiv;

+
+ /*
+ Log from Fritz!Box 7170 Annex B:
+

+        CPU revision is: 00018448
+        Clocks: Async mode
+        Clocks: Setting DSP clock
+        Clocks: prediv: 1, postdiv: 1, mul: 5
+        Clocks: base = 25000000, frequency = 125000000, prediv = 1, postdiv = 
2, postdiv2 = 1, mul = 10
+        Clocks: Setting CPU clock
+        Adjusted requested frequency 211000000 to 211968000
+        Clocks: prediv: 1, postdiv: 1, mul: 6
+        Clocks: base = 35328000, frequency = 211968000, prediv = 1, postdiv = 
1, postdiv2 = -1, mul = 6
+        Clocks: Setting USB clock
+        Adjusted requested frequency 48000000 to 48076920
+        Clocks: prediv: 13, postdiv: 1, mul: 5
+        Clocks: base = 125000000, frequency = 48000000, prediv = 13, postdiv 

= 1, postdiv2 = -1, mul = 5
+
+ DSL didn't work if you didn't set the postdiv 2:1 postdiv2
combination, driver hung on startup.
+ Haven't tested this on a synchronous board, neither do i know what to
do with ar7_dsp_clock
+ */
+
+ cpu_base = tnetd7200_get_clock_base(TNETD7200_CLOCK_ID_CPU, bootcr);
+ dsp_base = tnetd7200_get_clock_base(TNETD7200_CLOCK_ID_DSP, bootcr);
+
+ if (*bootcr & BOOT_PLL_ASYNC_MODE) {
+ printk("Clocks: Async mode\n");
+
+ printk("Clocks: Setting DSP clock\n");
+ calculate(dsp_base, TNETD7200_DEF_DSP_CLK, &dsp_prediv, &dsp_postdiv,
&dsp_mul);
+ ar7_bus_clock = ((dsp_base / dsp_prediv) * dsp_mul) / dsp_postdiv;
+ tnetd7200_set_clock(dsp_base, &clocks->dsp,
+ dsp_prediv, dsp_postdiv * 2, dsp_postdiv, dsp_mul * 2,
+ ar7_bus_clock);
+
+ printk("Clocks: Setting CPU clock\n");
+ calculate(cpu_base, TNETD7200_DEF_CPU_CLK, &cpu_prediv, &cpu_postdiv,
&cpu_mul);
+ ar7_cpu_clock = ((cpu_base / cpu_prediv) * cpu_mul) / cpu_postdiv;
+ tnetd7200_set_clock(cpu_base, &clocks->cpu,
+ cpu_prediv, cpu_postdiv, -1, cpu_mul,
+ ar7_cpu_clock);
+
+ } else {
+ if (*bootcr & BOOT_PLL_2TO1_MODE) {
+ printk("Clocks: Sync 2:1 mode\n");
+
+ printk("Clocks: Setting CPU clock\n");
+ calculate(cpu_base, TNETD7200_DEF_CPU_CLK, &cpu_prediv,
&cpu_postdiv, &cpu_mul);
+ ar7_cpu_clock = ((cpu_base / cpu_prediv) * cpu_mul) /
cpu_postdiv;
+ tnetd7200_set_clock(cpu_base, &clocks->cpu,
+ cpu_prediv, cpu_postdiv, -1, cpu_mul,
+ ar7_cpu_clock);
+
+ printk("Clocks: Setting DSP clock\n");
+ calculate(dsp_base, TNETD7200_DEF_DSP_CLK, &dsp_prediv,
&dsp_postdiv, &dsp_mul);
+ ar7_bus_clock = ar7_cpu_clock / 2;
+ tnetd7200_set_clock(dsp_base, &clocks->dsp,
+ dsp_prediv, dsp_postdiv * 2, dsp_postdiv, dsp_mul * 2,
+ ar7_bus_clock);
+ } else {
+ printk("Clocks: Sync 1:1 mode\n");
+
+ printk("Clocks: Setting DSP clock\n");
+ calculate(dsp_base, TNETD7200_DEF_CPU_CLK, &dsp_prediv,
&dsp_postdiv, &dsp_mul);
+ ar7_bus_clock = ((dsp_base / dsp_prediv) * dsp_mul) /
dsp_postdiv;
+ tnetd7200_set_clock(dsp_base, &clocks->dsp,
+ dsp_prediv, dsp_postdiv * 2, dsp_postdiv, dsp_mul * 2,
+ ar7_bus_clock);
+
+ ar7_cpu_clock = ar7_bus_clock;
+ }
+ }
+

+    printk("Clocks: Setting USB clock\n");
+    usb_base = ar7_bus_clock;
+    calculate(usb_base, TNETD7200_DEF_USB_CLK, &usb_prediv, &usb_postdiv, 

&usb_mul);
+ tnetd7200_set_clock(usb_base, &clocks->usb,
+ usb_prediv, usb_postdiv, -1, usb_mul,
+ TNETD7200_DEF_USB_CLK);
+
+#warning FIXME: ????! Hrmm
+ ar7_dsp_clock = ar7_cpu_clock;
+
+ iounmap(clocks);
+ iounmap(bootcr);
+}
+
+void __init ar7_init_clocks(void)
+{
+ switch (ar7_chip_id()) {
+ case AR7_CHIP_7100:
+#warning FIXME: Check if the new 7200 clock init works for 7100
+ tnetd7200_init_clocks();
+ break;
+ case AR7_CHIP_7200:
+ tnetd7200_init_clocks();
+ break;
+ case AR7_CHIP_7300:
+ ar7_dsp_clock = tnetd7300_dsp_clock();
+ tnetd7300_init_clocks();
+ break;
+ default:
+ break;
+ }
+}

diff -urN linux-2.6.22.1/arch/mips/ar7/Makefile
linux-ar7/arch/mips/ar7/Makefile

@@ -0,0 +1,13 @@
+
+obj-y := \
+	prom.o \
+	setup.o \
+	memory.o \
+	irq.o \
+	time.o \
+	platform.o \
+	gpio.o \
+	clock.o \
+	vlynq.o
+
+EXTRA_AFLAGS := $(CFLAGS)

diff -urN linux-2.6.22.1/arch/mips/ar7/memory.c
linux-ar7/arch/mips/ar7/memory.c

diff -urN linux-2.6.22.1/arch/mips/ar7/platform.c linux-ar7/arch/mips/ar7/platform.c
--- linux-2.6.22.1/arch/mips/ar7/platform.c 1970-01-01 01:00:00.000000000
+0100
+++ linux-ar7/arch/mips/ar7/platform.c 2007-08-09 16:22:39.000000000 +0200
@@ -0,0 +1,412 @@
+/*
+ * $Id: platform.c 8280 2007-07-31 15:52:06Z florian $
+ *
+ * Copyright (C) 2006, 2007 OpenWrt.org
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/autoconf.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/serial.h>
+#include <linux/serial_8250.h>
+#include <linux/ioport.h>
+#include <asm/addrspace.h>
+#include <asm/io.h>
+#include <asm/ar7/ar7.h>
+#include <asm/ar7/gpio.h>
+#include <asm/ar7/prom.h>
+#include <asm/ar7/vlynq.h>
+
+struct plat_vlynq_data {
+ struct plat_vlynq_ops ops;
+ int gpio_bit;
+ int reset_bit;
+};
+
+
+static int vlynq_on(struct vlynq_device *dev)
+{
+ int result;
+ struct plat_vlynq_data *pdata = dev->dev.platform_data;
+
+ if ((result = gpio_request(pdata->gpio_bit, "vlynq")))
+ goto out;
+
+ ar7_device_reset(pdata->reset_bit);
+
+ if ((result = ar7_gpio_disable(pdata->gpio_bit)))
+ goto out_enabled;
+
+ if ((result = ar7_gpio_enable(pdata->gpio_bit)))
+ goto out_enabled;
+
+ if ((result = gpio_direction_output(pdata->gpio_bit)))
+ goto out_gpio_enabled;
+
+ gpio_set_value(pdata->gpio_bit, 0);
+ mdelay(50);
+
+ gpio_set_value(pdata->gpio_bit, 1);
+ mdelay(50);
+
+ return 0;
+
+out_gpio_enabled:
+ ar7_gpio_disable(pdata->gpio_bit);
+out_enabled:
+ ar7_device_disable(pdata->reset_bit);
+ gpio_free(pdata->gpio_bit);
+out:
+ return result;
+}
+
+static void vlynq_off(struct vlynq_device *dev)
+{
+ struct plat_vlynq_data *pdata = dev->dev.platform_data;
+ ar7_gpio_disable(pdata->gpio_bit);
+ gpio_free(pdata->gpio_bit);
+ ar7_device_disable(pdata->reset_bit);
+}
+
+static struct resource physmap_flash_resource = {
+ .name = "mem",
+ .flags = IORESOURCE_MEM,
+ .start = 0x10000000,
+ .end = 0x103fffff,
+};
+
+static struct resource cpmac_low_res[] = {
+ {
+ .name = "regs",
+ .flags = IORESOURCE_MEM,
+ .start = AR7_REGS_MAC0,
+ .end = AR7_REGS_MAC0 + 0x7FF,
+ },
+ {
+ .name = "irq",
+ .flags = IORESOURCE_IRQ,
+ .start = 27,
+ .end = 27,
+ },
+};
+
+static struct resource cpmac_high_res[] = {
+ {
+ .name = "regs",
+ .flags = IORESOURCE_MEM,
+ .start = AR7_REGS_MAC1,
+ .end = AR7_REGS_MAC1 + 0x7FF,
+ },
+ {
+ .name = "irq",
+ .flags = IORESOURCE_IRQ,
+ .start = 41,
+ .end = 41,
+ },
+};
+
+static struct resource vlynq_low_res[] = {
+ {
+ .name = "regs",
+ .flags = IORESOURCE_MEM,
+ .start = AR7_REGS_VLYNQ0,
+ .end = AR7_REGS_VLYNQ0 + 0xff,
+ },
+ {
+ .name = "irq",
+ .flags = IORESOURCE_IRQ,
+ .start = 29,
+ .end = 29,
+ },
+ {
+ .name = "mem",
+ .flags = IORESOURCE_MEM,
+ .start = 0x04000000,
+ .end = 0x04ffffff,
+ },
+ {
+ .name = "devirq",
+ .flags = IORESOURCE_IRQ,
+ .start = 80,
+ .end = 111,
+ },
+};
+
+static struct resource vlynq_high_res[] = {
+ {
+ .name = "regs",
+ .flags = IORESOURCE_MEM,
+ .start = AR7_REGS_VLYNQ1,
+ .end = AR7_REGS_VLYNQ1 + 0xFF,
+ },
+ {
+ .name = "irq",
+ .flags = IORESOURCE_IRQ,
+ .start = 33,
+ .end = 33,
+ },
+ {
+ .name = "mem",
+ .flags = IORESOURCE_MEM,
+ .start = 0x0c000000,
+ .end = 0x0cffffff,
+ },
+ {
+ .name = "devirq",
+ .flags = IORESOURCE_IRQ,
+ .start = 112,
+ .end = 143,
+ },
+};
+
+static struct physmap_flash_data physmap_flash_data = {
+ .width = 2,
+};
+
+static struct plat_cpmac_data cpmac_low_data = {
+ .reset_bit = 17,
+ .power_bit = 20,
+ .phy_mask = 0x80000000,
+};
+
+static struct plat_cpmac_data cpmac_high_data = {
+ .reset_bit = 21,
+ .power_bit = 22,
+ .phy_mask = 0x7fffffff,
+};
+
+static struct plat_vlynq_data vlynq_low_data = {
+ .ops.on = vlynq_on,
+ .ops.off = vlynq_off,
+ .reset_bit = 20,
+ .gpio_bit = 18,
+};
+
+static struct plat_vlynq_data vlynq_high_data = {
+ .ops.on = vlynq_on,
+ .ops.off = vlynq_off,
+ .reset_bit = 16,
+ .gpio_bit = 19,
+};
+
+static struct platform_device physmap_flash = {
+ .id = 0,
+ .name = "physmap-flash",
+ .dev.platform_data = &physmap_flash_data,
+ .resource = &physmap_flash_resource,
+ .num_resources = 1,
+};
+
+static struct platform_device cpmac_low = {
+ .id = 0,
+ .name = "cpmac",
+ .dev.platform_data = &cpmac_low_data,
+ .resource = cpmac_low_res,
+ .num_resources = ARRAY_SIZE(cpmac_low_res),
+};
+
+static struct platform_device cpmac_high = {
+ .id = 1,
+ .name = "cpmac",
+ .dev.platform_data = &cpmac_high_data,
+ .resource = cpmac_high_res,
+ .num_resources = ARRAY_SIZE(cpmac_high_res),
+};
+
+static struct platform_device vlynq_low = {
+ .id = 0,
+ .name = "vlynq",
+ .dev.platform_data = &vlynq_low_data,
+ .resource = vlynq_low_res,
+ .num_resources = ARRAY_SIZE(vlynq_low_res),
+};
+
+static struct platform_device vlynq_high = {
+ .id = 1,
+ .name = "vlynq",
+ .dev.platform_data = &vlynq_high_data,
+ .resource = vlynq_high_res,
+ .num_resources = ARRAY_SIZE(vlynq_high_res),
+};
+
+
+/* This is proper way to define uart ports, but they are then detected
+ * as xscale and, obviously, don't work...
+ */
+#if !defined(CONFIG_SERIAL_8250)
+
+static struct plat_serial8250_port uart0_data =
+{
+ .mapbase = AR7_REGS_UART0,
+ .irq = AR7_IRQ_UART0,
+ .regshift = 2,
+ .iotype = UPIO_MEM,
+ .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
+};
+
+static struct plat_serial8250_port uart1_data =
+{
+ .mapbase = UR8_REGS_UART1,
+ .irq = AR7_IRQ_UART1,
+ .regshift = 2,
+ .iotype = UPIO_MEM,
+ .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
+};
+
+static struct plat_serial8250_port uart_data[] = {
+ uart0_data,
+ uart1_data,
+ { .flags = 0 }
+};
+
+static struct plat_serial8250_port uart_data_single[] = {
+ uart0_data,
+ { .flags = 0 }
+};
+
+static struct platform_device uart = {
+ .id = 0,
+ .name = "serial8250",
+ .dev.platform_data = uart_data_single
+};
+#endif
+
+static inline unsigned char char2hex(char h)
+{
+ switch (h) {
+ case '0': case '1': case '2': case '3': case '4':
+ case '5': case '6': case '7': case '8': case '9':
+ return h - '0';
+ case 'A': case 'B': case 'C': case 'D': case 'E': case 'F':
+ return h - 'A' + 10;
+ case 'a': case 'b': case 'c': case 'd': case 'e': case 'f':
+ return h - 'a' + 10;
+ default:
+ return 0;
+ }
+}
+
+static void cpmac_get_mac(int instance, unsigned char *dev_addr) +{
+ int i;
+ char name[5], default_mac[] = "00:00:00:12:34:56", *mac;
+
+ mac = NULL;
+ sprintf(name, "mac%c", 'a' + instance);
+ mac = prom_getenv(name);
+ if (!mac) {
+ sprintf(name, "mac%c", 'a');
+ mac = prom_getenv(name);
+ }
+ if (!mac)
+ mac = default_mac;
+ for (i = 0; i < 6; i++)
+ dev_addr[i] = (char2hex(mac[i * 3]) << 4) +
+ char2hex(mac[i * 3 + 1]);
+}
+
+static int __init ar7_register_devices(void)
+{
+ int res;
+
+#ifdef CONFIG_SERIAL_8250
+
+ static struct uart_port uart_port[2];
+
+ memset(uart_port, 0, sizeof(struct uart_port) * 2);
+
+ uart_port[0].type = PORT_AR7;
+ uart_port[0].line = 0;
+ uart_port[0].irq = AR7_IRQ_UART0;
+ uart_port[0].uartclk = ar7_bus_freq() / 2;
+ uart_port[0].iotype = UPIO_MEM;
+ uart_port[0].mapbase = AR7_REGS_UART0;
+ uart_port[0].membase = ioremap(uart_port[0].mapbase, 256);
+ uart_port[0].regshift = 2;
+ res = early_serial_setup(&uart_port[0]);
+ if (res)
+ return res;
+
+

+    // Only TNETD73xx have a second serial port
+    if (ar7_has_second_uart()) {
+    	uart_port[1].type = PORT_AR7;
+    	uart_port[1].line = 1;
+    	uart_port[1].irq = AR7_IRQ_UART1;
+    	uart_port[1].uartclk = ar7_bus_freq() / 2;
+    	uart_port[1].iotype = UPIO_MEM;
+    	uart_port[1].mapbase = UR8_REGS_UART1;
+    	uart_port[1].membase = ioremap(uart_port[1].mapbase, 256);
+    	uart_port[1].regshift = 2;
+    	res = early_serial_setup(&uart_port[1]);
+    	if (res)
+    		return res;
+    }

+
+#else // !CONFIG_SERIAL_8250
+
+ uart_data[0].uartclk = ar7_bus_freq() / 2;
+ uart_data[1].uartclk = uart_data[0].uartclk;
+
+ // Only TNETD73xx have a second serial port
+ if (ar7_has_second_uart()) {
+ uart.dev.platform_data = uart_data;
+ }
+
+ res = platform_device_register(&uart);
+ if (res)
+ return res;
+
+#endif // CONFIG_SERIAL_8250
+
+ res = platform_device_register(&physmap_flash);
+ if (res)
+ return res;
+
+ res = platform_device_register(&vlynq_low);
+ if (res)
+ return res;
+
+ ar7_device_disable(vlynq_low_data.reset_bit);
+ if (ar7_has_high_vlynq()) {
+ ar7_device_disable(vlynq_high_data.reset_bit);
+ res = platform_device_register(&vlynq_high);
+ if (res)
+ return res;
+ }
+
+ if (ar7_has_high_cpmac()) {
+ cpmac_get_mac(1, cpmac_high_data.dev_addr);
+ res = platform_device_register(&cpmac_high);
+ if (res)
+ return res;
+ } else {
+ cpmac_low_data.phy_mask = 0xffffffff;
+ }
+
+ cpmac_get_mac(0, cpmac_low_data.dev_addr);
+ res = platform_device_register(&cpmac_low);
+
+ return res;
+}
+
+
+arch_initcall(ar7_register_devices);

name)
+Example: cpufrequency=211968000
++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+
+| 01 |CTRL|CHECKSUM | 01 | _2 | _1 | _1 | _9 | _6 | _8 | _0 | _0 | _0 | \0 | FF |
++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+
+
+Name=Value pair in a single chunk
+Example: NAME=VALUE
++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+
+| 00 |CTRL|CHECKSUM | 01 | _N | _A | _M | _E | _0 | _V | _A | _L | _U | _E | \0 |
++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+
+
+Name=Value pair in 2 chunks (len is the number of chunks) +Example: bootloaderVersion=1.3.7.15
++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+
+| 00 |CTRL|CHECKSUM | 02 | _b | _o | _o | _t | _l | _o | _a | _d | _e | _r | _V |
++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+
+| _e | _r | _s | _i | _o | _n | \0 | _1 | _. | _3 | _. | _7 | _. | _1 | _5 | \0 |
++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+
+
+Data is padded with 0xFF
+
+*/
+
+#define PSP_ENV_SIZE 4096
+
+static char psp_env_data[PSP_ENV_SIZE] = { 0, };
+
+static char * __init lookup_psp_var_map(u8 num)
+{
+ int i;
+
+ for (i = 0; i < sizeof(psp_var_map); i++)
+ if (psp_var_map[i].num == num)
+ return psp_var_map[i].value;
+
+ return NULL;
+}
+
+static void __init add_adam2_var(char *name, char *value)
+{
+ int i;
+ for (i = 0; i < MAX_ENTRY; i++) {
+ if (!adam2_env[i].name) {
+ adam2_env[i].name = name;
+ adam2_env[i].value = value;
+ return;
+ } else if (!strcmp(adam2_env[i].name, name)) {
+ adam2_env[i].value = value;
+ return;
+ }
+ }
+}
+
+static int __init parse_psp_env(void *psp_env_base)
+{
+ int i, n;
+ char *name, *value;
+ struct psp_env_chunk *chunks = (struct psp_env_chunk *)psp_env_data;
+
+ memcpy_fromio(chunks, psp_env_base, PSP_ENV_SIZE);
+
+ i = 1;
+ n = PSP_ENV_SIZE / sizeof(struct psp_env_chunk);
+ while (i < n) {
+ if ((chunks[i].num == 0xff) || ((i + chunks[i].len) > n))
+ break;
+ value = chunks[i].data;
+ if (chunks[i].num) {
+ name = lookup_psp_var_map(chunks[i].num);
+ } else {
+ name = value;
+ value += strlen(name) + 1;
+ }
+ if (name)
+ add_adam2_var(name, value);
+ i += chunks[i].len;
+ }
+ return 0;
+}
+
+static void __init ar7_init_env(struct env_var *env)
+{
+ int i;
+ struct psbl_rec *psbl = (struct psbl_rec *)(KSEG1ADDR(0x14000300));
+ void *psp_env = (void *)KSEG1ADDR(psbl->env_base);
+
+ if(strcmp(psp_env, psp_env_version) == 0) {
+ parse_psp_env(psp_env);
+ } else {
+ for (i = 0; i < MAX_ENTRY; i++, env++)
+ if (env->name)
+ add_adam2_var(env->name, env->value);
+ }
+}
+
+static void __init console_config(void)
+{
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+ char console_string[40];
+ int baud = 0;
+ char parity = '\0', bits = '\0', flow = '\0';
+ char *s, *p;
+
+ if (strstr(prom_getcmdline(), "console="))
+ return;
+
+#ifdef CONFIG_KGDB
+ if (!strstr(prom_getcmdline(), "nokgdb"))
+ {

+            strcat(prom_getcmdline(), " console=kgdb");
+            kgdb_enabled = 1;
+            return;

+ }
+#endif
+
+ if ((s = prom_getenv("modetty0"))) {
+ baud = simple_strtoul(s, &p, 10);
+ s = p;
+ if (*s == ',') s++;
+ if (*s) parity = *s++;
+ if (*s == ',') s++;
+ if (*s) bits = *s++;
+ if (*s == ',') s++;
+ if (*s == 'h') flow = 'r';
+ }
+
+ if (baud == 0)
+ baud = 38400;
+ if (parity != 'n' && parity != 'o' && parity != 'e')
+ parity = 'n';
+ if (bits != '7' && bits != '8')
+ bits = '8';
+ if (flow == '\0')
+ flow = 'r';
+
+ sprintf(console_string, " console=ttyS0,%d%c%c%c", baud,
+ parity, bits, flow);
+ strcat(prom_getcmdline(), console_string);
+#endif
+}
+
+void __init prom_init(void)
+{
+ ar7_init_cmdline(fw_arg0, (char **)fw_arg1);
+ ar7_init_env((struct env_var *)fw_arg2);
+ console_config();
+}
+
+#define PORT(offset) (KSEG1ADDR(AR7_REGS_UART0 + (offset * 4))) +static inline unsigned int serial_in(int offset)
+{
+ return readb((void *)PORT(offset));
+}
+
+static inline void serial_out(int offset, int value) +{
+ writeb(value, (void *)PORT(offset));
+}
+
+char prom_getchar(void)
+{
+ while (!(serial_in(UART_LSR) & UART_LSR_DR));
+ return serial_in(UART_RX);
+}
+
+int prom_putchar(char c)
+{
+ while ((serial_in(UART_LSR) & UART_LSR_TEMT) == 0);
+ serial_out(UART_TX, c);
+ return 1;
+}
+
+// from adm5120/prom.c
+void prom_printf(char *fmt, ...)
+{

+    va_list args;
+    int l;
+    char *p, *buf_end;
+    char buf[1024];
+
+    va_start(args, fmt);
+    l = vsprintf(buf, fmt, args); /* hopefully i < sizeof(buf) */
+    va_end(args);

+
+ buf_end = buf + l;
+
+ for (p = buf; p < buf_end; p++) {
+ /* Crude cr/nl handling is better than none */
+ if (*p == '\n')
+ prom_putchar('\r');
+ prom_putchar(*p);
+ }
+}
+
+#ifdef CONFIG_KGDB
+int putDebugChar(char c)
+{
+ return prom_putchar(c);
+}
+
+char getDebugChar(void)
+{
+ return prom_getchar();
+}
+#endif
+
+EXPORT_SYMBOL(prom_getenv);

*owner)
+{
+ driver->driver.name = driver->name;
+ driver->driver.bus = &vlynq_bus_type;
+/* driver->driver.owner = owner;*/
+ return driver_register(&driver->driver);
+}
+EXPORT_SYMBOL(__vlynq_register_driver);
+
+void vlynq_unregister_driver(struct vlynq_driver *driver) +{
+ driver_unregister(&driver->driver);
+}
+EXPORT_SYMBOL(vlynq_unregister_driver);
+
+int vlynq_device_enable(struct vlynq_device *dev)
+{
+ u32 val;
+ u32 div;
+ int result;
+ struct plat_vlynq_ops *ops = dev->dev.platform_data;
+
+ result = ops->on(dev);
+ if (result)
+ return result;
+
+ dev->local->control = 0;
+ dev->remote->control = 0;
+
+ printk("ar7_dsp_freq() = %d\n", ar7_dsp_freq());
+ if (vlynq_linked(dev))
+ return vlynq_setup_irq(dev);
+
+ for (val = 0; val < 8; val++) {
+ dev->local->control = VLYNQ_CTRL_CLOCK_DIV(val) |
+ VLYNQ_CTRL_CLOCK_INT;
+ if (vlynq_linked(dev))
+ return vlynq_setup_irq(dev);
+ }
+
+ return -ENODEV;
+}
+
+void vlynq_device_disable(struct vlynq_device *dev)
+{
+ struct plat_vlynq_ops *ops = dev->dev.platform_data;
+
+ vlynq_free_irq(dev);
+ ops->off(dev);
+}
+
+u32 vlynq_local_id(struct vlynq_device *dev)
+{
+ return dev->local->chip;
+}
+
+u32 vlynq_remote_id(struct vlynq_device *dev)
+{
+ return dev->remote->chip;
+}
+
+void vlynq_set_local_mapping(struct vlynq_device *dev, u32 tx_offset,
+ struct vlynq_mapping *mapping)
+{
+ int i;
+
+ dev->local->tx_offset = tx_offset;
+ for (i = 0; i < 4; i++) {
+ dev->local->rx_mapping[i].offset = mapping[i].offset;
+ dev->local->rx_mapping[i].size = mapping[i].size;
+ }
+}
+
+void vlynq_set_remote_mapping(struct vlynq_device *dev, u32 tx_offset,
+ struct vlynq_mapping *mapping)
+{
+ int i;
+
+ dev->remote->tx_offset = tx_offset;
+ for (i = 0; i < 4; i++) {
+ dev->remote->rx_mapping[i].offset = mapping[i].offset;
+ dev->remote->rx_mapping[i].size = mapping[i].size;
+ }
+}
+
+int vlynq_virq_to_irq(struct vlynq_device *dev, int virq) +{
+ if ((virq < 0) || (virq >= PER_DEVICE_IRQS))
+ return -EINVAL;
+
+ if ((virq == dev->local_irq) || (virq == dev->remote_irq))
+ return -EINVAL;
+
+ return dev->irq_start + virq;
+}
+
+int vlynq_irq_to_virq(struct vlynq_device *dev, int irq)
+{
+ if ((irq < dev->irq_start) || (irq >= dev->irq_start + PER_DEVICE_IRQS))
+ return -EINVAL;
+
+ return irq - dev->irq_start;
+}
+
+int vlynq_set_local_irq(struct vlynq_device *dev, int virq) +{
+ if ((virq < 0) || (virq >= PER_DEVICE_IRQS))
+ return -EINVAL;
+
+ if (virq == dev->remote_irq)
+ return -EINVAL;
+
+ dev->local_irq = virq;
+
+ return 0;
+}
+
+int vlynq_set_remote_irq(struct vlynq_device *dev, int virq) +{
+ if ((virq < 0) || (virq >= PER_DEVICE_IRQS))
+ return -EINVAL;
+
+ if (virq == dev->local_irq)
+ return -EINVAL;
+
+ dev->remote_irq = virq;
+
+ return 0;
+}
+
+static int vlynq_probe(struct platform_device *pdev)
+{
+ struct vlynq_device *dev;
+ struct resource *regs_res, *mem_res, *irq_res;
+ int len, result;
+
+ if (strcmp(pdev->name, "vlynq"))
+ return -ENODEV;
+
+ regs_res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs");
+ if (!regs_res)
+ return -ENODEV;
+
+ mem_res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mem");
+ if (!mem_res)
+ return -ENODEV;
+
+ irq_res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "devirq");
+ if (!irq_res)
+ return -ENODEV;
+
+ dev = kmalloc(sizeof(struct vlynq_device), GFP_KERNEL);
+ if (!dev) {
+ printk(KERN_ERR "vlynq: failed to allocate device structure\n");
+ return -ENOMEM;
+ }
+
+ memset(dev, 0, sizeof(struct vlynq_device));
+
+ dev->id = pdev->id;
+ dev->dev.bus = &vlynq_bus_type;
+ dev->dev.parent = &pdev->dev;
+ snprintf(dev->dev.bus_id, BUS_ID_SIZE, "vlynq%d", dev->id);
+ dev->dev.bus_id[BUS_ID_SIZE - 1] = 0;
+ dev->dev.platform_data = pdev->dev.platform_data;
+ dev->dev.release = vlynq_device_release;
+
+ dev->regs_start = regs_res->start;
+ dev->regs_end = regs_res->end;
+ dev->mem_start = mem_res->start;
+ dev->mem_end = mem_res->end;
+
+ len = regs_res->end - regs_res->start;
+ if (!request_mem_region(regs_res->start, len, dev->dev.bus_id)) {
+ printk("%s: Can't request vlynq registers\n", dev->dev.bus_id);
+ result = -ENXIO;
+ goto fail_request;
+ }
+
+ dev->local = ioremap_nocache(regs_res->start, len);
+ if (!dev->local) {
+ printk("%s: Can't remap vlynq registers\n", dev->dev.bus_id);
+ result = -ENXIO;
+ goto fail_remap;
+ }
+
+ dev->remote = (struct vlynq_regs *)((u32)dev->local + 128);
+
+ dev->irq = platform_get_irq_byname(pdev, "irq");
+ dev->irq_start = irq_res->start;
+ dev->irq_end = irq_res->end;
+ dev->local_irq = 31;
+ dev->remote_irq = 30;
+
+ if (device_register(&dev->dev))
+ goto fail_register;
+ platform_set_drvdata(pdev, dev);
+
+ printk("%s: regs 0x%p, irq %d, mem 0x%p\n",
+ dev->dev.bus_id, (void *)dev->regs_start, dev->irq,
+ (void *)dev->mem_start);
+
+ return 0;
+
+fail_register:
+fail_remap:
+ iounmap(dev->local);
+fail_request:
+ release_mem_region(regs_res->start, len);
+ kfree(dev);
+ return result;
+}
+
+static int vlynq_remove(struct platform_device *pdev)
+{
+ struct vlynq_device *dev = platform_get_drvdata(pdev);
+
+ device_unregister(&dev->dev);
+ release_mem_region(dev->regs_start, dev->regs_end - dev->regs_start);
+
+ kfree(dev);
+
+ return 0;
+}
+
+static struct platform_driver vlynq_driver = {
+ .driver.name = "vlynq",
+ .probe = vlynq_probe,
+ .remove = vlynq_remove,
+};
+
+struct bus_type vlynq_bus_type = {
+ .name = "vlynq",
+ .probe = vlynq_device_probe,
+ .remove = vlynq_device_remove,
+};
+EXPORT_SYMBOL(vlynq_bus_type);
+
+#ifdef CONFIG_PCI
+extern void vlynq_pci_init(void);
+#endif
+int __init vlynq_init(void)
+{
+ int res = 0;
+
+ res = bus_register(&vlynq_bus_type);
+ if (res)
+ goto fail_bus;
+
+ res = platform_driver_register(&vlynq_driver);
+ if (res)
+ goto fail_platform;
+
+#ifdef CONFIG_PCI
+ vlynq_pci_init();
+#endif
+
+ return 0;
+
+fail_platform:
+ bus_unregister(&vlynq_bus_type);
+fail_bus:
+ return res;
+}
+
+/*
+void __devexit vlynq_exit(void)
+{
+ platform_driver_unregister(&vlynq_driver);
+ bus_unregister(&vlynq_bus_type);
+}
+*/
+
+
+subsys_initcall(vlynq_init);

diff -urN linux-2.6.22.1/arch/mips/Kconfig linux-ar7/arch/mips/Kconfig
@@ -15,6 +15,20 @@
 	prompt "System type"
 	default SGI_IP22
 
+config AR7
+	bool "Texas Instruments AR7"
+	select BOOT_ELF32
+	select DMA_NONCOHERENT
+	select HW_HAS_PCI
+	select IRQ_CPU
+	select SWAP_IO_SPACE
+	select SYS_HAS_CPU_MIPS32_R1
+	select SYS_HAS_EARLY_PRINTK
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_KGDB
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select GENERIC_GPIO
+
 config MACH_ALCHEMY
 	bool "Alchemy processor based machines"
 

diff -urN linux-2.6.22.1/arch/mips/kernel/traps.c
linux-ar7/arch/mips/kernel/traps.c
--- linux-2.6.22.1/arch/mips/kernel/traps.c 2007-07-10 20:56:30.000000000
+0200
+++ linux-ar7/arch/mips/kernel/traps.c 2007-08-09 16:21:48.000000000 +0200
@@ -1051,11 +1051,6 @@
unsigned long exception_handlers[32];
unsigned long vi_handlers[64];

-/*
- * As a side effect of the way this is implemented we're limited
- * to interrupt handlers in the address range from
- * KSEG0 <= x < KSEG0 + 256mb on the Nevada. Oh well ...
- */
void *set_except_vector(int n, void *addr)
{
unsigned long handler = (unsigned long) addr;
@@ -1063,9 +1058,15 @@

exception_handlers[n] = handler;
if (n == 0 && cpu_has_divec) {
- *(volatile u32 *)(ebase + 0x200) = 0x08000000 |
- (0x03ffffff & (handler >> 2));
- flush_icache_range(ebase + 0x200, ebase + 0x204);
+ /* lui k0, 0x0000 */
+ *(volatile u32 *)(CAC_BASE+0x200) = 0x3c1a0000 | (handler >> 16);
+ /* ori k0, 0x0000 */
+ *(volatile u32 *)(CAC_BASE+0x204) = 0x375a0000 | (handler & 0xffff);
+ /* jr k0 */
+ *(volatile u32 *)(CAC_BASE+0x208) = 0x03400008;
+ /* nop */
+ *(volatile u32 *)(CAC_BASE+0x20C) = 0x00000000;
+ flush_icache_range(CAC_BASE+0x200, CAC_BASE+0x210);
}
return (void *)old_handler;
}

diff -urN linux-2.6.22.1/arch/mips/Makefile linux-ar7/arch/mips/Makefile
@@ -158,6 +158,13 @@
 #
 
 #
+# Texas Instruments AR7
+#
+core-$(CONFIG_AR7)		+= arch/mips/ar7/
+cflags-$(CONFIG_AR7)		+= -Iinclude/asm-mips/ar7
+load-$(CONFIG_AR7)		+= 0xffffffff94100000
+
+#
 # Acer PICA 61, Mips Magnum 4000 and Olivetti M700.
 #
 core-$(CONFIG_MACH_JAZZ)	+= arch/mips/jazz/

diff -urN linux-2.6.22.1/drivers/char/ar7_gpio.c
linux-ar7/drivers/char/ar7_gpio.c

diff -urN linux-2.6.22.1/drivers/char/Kconfig linux-ar7/drivers/char/Kconfig
@@ -946,6 +946,15 @@
 	  To compile this driver as a module, choose M here: the
 	  module will be called mwave.
 
+config AR7_GPIO
+	tristate "TI AR7 GPIO Support"
+	depends on AR7
+	help
+	  Give userspace access to the GPIO pins on the Texas Instruments AR7 
+	  processors.
+
+	  If compiled as a module, it will be called ar7_gpio.
+
 config SCx200_GPIO
 	tristate "NatSemi SCx200 GPIO Support"
 	depends on SCx200

diff -urN linux-2.6.22.1/drivers/char/Makefile linux-ar7/drivers/char/Makefile
@@ -86,6 +86,7 @@
 obj-$(CONFIG_PPDEV)		+= ppdev.o
 obj-$(CONFIG_NWBUTTON)		+= nwbutton.o
 obj-$(CONFIG_NWFLASH)		+= nwflash.o
+obj-$(CONFIG_AR7_GPIO)		+= ar7_gpio.o
 obj-$(CONFIG_SCx200_GPIO)	+= scx200_gpio.o
 obj-$(CONFIG_PC8736x_GPIO)	+= pc8736x_gpio.o
 obj-$(CONFIG_NSC_GPIO)		+= nsc_gpio.o

diff -urN linux-2.6.22.1/drivers/leds/Kconfig linux-ar7/drivers/leds/Kconfig
@@ -20,6 +20,12 @@
 
 comment "LED drivers"
 
+config LEDS_AR7
+	tristate "LED Support for the TI AR7"
+	depends LEDS_CLASS && AR7
+	help
+	  This option enables support for the LEDs on TI AR7.
+
 config LEDS_CORGI
 	tristate "LED Support for the Sharp SL-C7x0 series"
 	depends on LEDS_CLASS && PXA_SHARP_C7xx

diff -urN linux-2.6.22.1/drivers/leds/leds-ar7.c
linux-ar7/drivers/leds/leds-ar7.c

diff -urN linux-2.6.22.1/drivers/leds/Makefile linux-ar7/drivers/leds/Makefile
@@ -5,6 +5,7 @@
 obj-$(CONFIG_LEDS_TRIGGERS)		+= led-triggers.o
 
 # LED Platform Drivers
+obj-$(CONFIG_LEDS_AR7)			+= leds-ar7.o
 obj-$(CONFIG_LEDS_CORGI)		+= leds-corgi.o
 obj-$(CONFIG_LEDS_LOCOMO)		+= leds-locomo.o
 obj-$(CONFIG_LEDS_SPITZ)		+= leds-spitz.o

diff -urN linux-2.6.22.1/drivers/mtd/Kconfig linux-ar7/drivers/mtd/Kconfig
@@ -150,6 +150,12 @@
 	  for your particular device. It won't happen automatically. The
 	  'armflash' map driver (CONFIG_MTD_ARMFLASH) does this, for example.
 
+config MTD_AR7_PARTS
+	tristate "TI AR7 partitioning support"
+	depends on MTD_PARTITIONS
+	---help---
+	  TI AR7 partitioning support
+
 comment "User Modules And Translation Layers"
 
 config MTD_CHAR

diff -urN linux-2.6.22.1/drivers/mtd/Makefile linux-ar7/drivers/mtd/Makefile
@@ -11,6 +11,7 @@
 obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o
 obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
 obj-$(CONFIG_MTD_AFS_PARTS)	+= afs.o
+obj-$(CONFIG_MTD_AR7_PARTS)	+= ar7part.o
 
 # 'Users' - code which presents functionality to userspace.
 obj-$(CONFIG_MTD_CHAR)		+= mtdchar.o

diff -urN linux-2.6.22.1/drivers/mtd/maps/physmap.c linux-ar7/drivers/mtd/maps/physmap.c
--- linux-2.6.22.1/drivers/mtd/maps/physmap.c 2007-07-10 20:56:30.000000000
+0200
+++ linux-ar7/drivers/mtd/maps/physmap.c 2007-08-09 16:48:08.000000000 +0200
@@ -74,7 +74,7 @@

static const char *rom_probe_types[] =
{ "cfi_probe", "jedec_probe", "map_rom", NULL };
#ifdef CONFIG_MTD_PARTITIONS
-static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", NULL }; +static const char *part_probe_types[] =
{ "cmdlinepart", "RedBoot", "ar7part", NULL };
#endif

static int physmap_flash_probe(struct platform_device *dev)

val)
+{
+ struct cpmac_mdio_regs *regs = (struct cpmac_mdio_regs *)bus->priv;
+ volatile u32 tmp;
+
+ while ((tmp = regs->access) & MDIO_BUSY);
+ regs->access = MDIO_BUSY | MDIO_WRITE |
+ MDIO_REG(regnum & 0x1f) | MDIO_PHY(phy_id & 0x1f) |
+ val;
+
+ return 0;
+}
+
+static int cpmac_mdio_reset(struct mii_bus *bus)
+{
+ struct cpmac_mdio_regs *regs = (struct cpmac_mdio_regs *)bus->priv;
+
+ ar7_device_reset(AR7_RESET_BIT_MDIO);
+ regs->control = MDIOC_ENABLE |
+ MDIOC_CLKDIV(ar7_cpmac_freq() / 2200000 - 1);
+
+ return 0;
+}
+
+static int mii_irqs[PHY_MAX_ADDR] = { PHY_POLL, };
+
+static struct mii_bus cpmac_mii = {
+ .name = "cpmac-mii",
+ .read = cpmac_mdio_read,
+ .write = cpmac_mdio_write,
+ .reset = cpmac_mdio_reset,
+ .irq = mii_irqs,
+};
+
+static int cpmac_config(struct net_device *dev, struct ifmap *map) +{
+ if (dev->flags & IFF_UP)
+ return -EBUSY;
+
+ /* Don't allow changing the I/O address */
+ if (map->base_addr != dev->base_addr)
+ return -EOPNOTSUPP;
+
+ /* ignore other fields */
+ return 0;
+}
+
+static int cpmac_set_mac_address(struct net_device *dev, void *addr) +{
+ struct sockaddr *sa = addr;
+
+ if (dev->flags & IFF_UP)
+ return -EBUSY;
+
+ memcpy(dev->dev_addr, sa->sa_data, dev->addr_len);
+
+ return 0;
+}
+
+static void cpmac_set_multicast_list(struct net_device *dev) +{
+ struct dev_mc_list *iter;
+ int i;
+ int hash, tmp;
+ int hashlo = 0, hashhi = 0;
+ struct cpmac_priv *priv = netdev_priv(dev);
+
+ if(dev->flags & IFF_PROMISC) {
+ priv->regs->mbp &= ~MBP_PROMISCCHAN(0); /* promisc channel 0 */
+ priv->regs->mbp |= MBP_RXPROMISC;
+ } else {
+ priv->regs->mbp &= ~MBP_RXPROMISC;
+ if(dev->flags & IFF_ALLMULTI) {
+ /* enable all multicast mode */
+ priv->regs->mac_hash_low = 0xffffffff;
+ priv->regs->mac_hash_high = 0xffffffff;
+ } else {
+ for(i = 0, iter = dev->mc_list; i < dev->mc_count;
+ i++, iter = iter->next) {
+ hash = 0;
+ tmp = iter->dmi_addr[0];
+ hash ^= (tmp >> 2) ^ (tmp << 4);
+ tmp = iter->dmi_addr[1];
+ hash ^= (tmp >> 4) ^ (tmp << 2);
+ tmp = iter->dmi_addr[2];
+ hash ^= (tmp >> 6) ^ tmp;
+ tmp = iter->dmi_addr[4];
+ hash ^= (tmp >> 2) ^ (tmp << 4);
+ tmp = iter->dmi_addr[5];
+ hash ^= (tmp >> 4) ^ (tmp << 2);
+ tmp = iter->dmi_addr[6];
+ hash ^= (tmp >> 6) ^ tmp;
+ hash &= 0x3f;
+ if(hash < 32) {
+ hashlo |= 1<<hash;
+ } else {
+ hashhi |= 1<<(hash - 32);
+ }
+ }
+
+ priv->regs->mac_hash_low = hashlo;
+ priv->regs->mac_hash_high = hashhi;
+ }
+ }
+}
+
+static struct sk_buff *cpmac_get_skb(struct net_device *dev) +{
+ struct sk_buff *skb;
+ struct cpmac_priv *priv = netdev_priv(dev);
+
+ skb = priv->skb_pool;
+ if (likely(skb)) {
+ priv->skb_pool = skb->next;
+ } else {
+ skb = dev_alloc_skb(CPMAC_SKB_SIZE + 2);
+ if (skb) {
+ skb->next = NULL;
+ skb_reserve(skb, 2);
+ skb->dev = priv->dev;
+ }
+ }
+
+ if (likely(priv->free_skbs))
+ priv->free_skbs--;
+
+ if (priv->free_skbs < CPMAC_LOW_THRESH)
+ schedule_work(&priv->alloc_work);
+
+ return skb;
+}
+
+static inline struct sk_buff *cpmac_rx_one(struct net_device *dev,
+ struct cpmac_priv *priv,
+ struct cpmac_desc *desc)
+{
+ unsigned long flags;
+ char *data;
+ struct sk_buff *skb, *result = NULL;
+
+ priv->regs->rx_ack[0] = virt_to_phys(desc);
+ if (unlikely(!desc->datalen)) {
+ if (printk_ratelimit())
+ printk(KERN_WARNING "%s: rx: spurious interrupt\n",
+ dev->name);
+ priv->stats.rx_errors++;
+ return NULL;
+ }
+
+ spin_lock_irqsave(&priv->lock, flags);
+ skb = cpmac_get_skb(dev);
+ if (likely(skb)) {
+ data = (char *)phys_to_virt(desc->hw_data);
+ dma_cache_inv((u32)data, desc->datalen);
+ skb_put(desc->skb, desc->datalen);
+ desc->skb->protocol = eth_type_trans(desc->skb, dev);
+ desc->skb->ip_summed = CHECKSUM_NONE;
+ priv->stats.rx_packets++;
+ priv->stats.rx_bytes += desc->datalen;
+ result = desc->skb;
+ desc->skb = skb;
+ } else {
+#ifdef CPMAC_DEBUG
+ if (printk_ratelimit())
+ printk("%s: low on skbs, dropping packet\n",
+ dev->name);
+#endif
+ priv->stats.rx_dropped++;
+ }
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ desc->hw_data = virt_to_phys(desc->skb->data);
+ desc->buflen = CPMAC_SKB_SIZE;
+ desc->dataflags = CPMAC_OWN;
+ dma_cache_wback((u32)desc, 16);
+
+ return result;
+}
+
+static void cpmac_rx(struct net_device *dev)
+{
+ struct sk_buff *skb;
+ struct cpmac_desc *desc;
+ struct cpmac_priv *priv = netdev_priv(dev);
+
+ spin_lock(&priv->lock);
+ if (unlikely(!priv->rx_head)) {
+ spin_unlock(&priv->lock);
+ return;
+ }
+
+ desc = priv->rx_head;
+ dma_cache_inv((u32)desc, 16);
+#ifdef CPMAC_DEBUG
+ printk(KERN_DEBUG "%s: len=%d, %s\n", __func__, pkt->datalen,
+ cpmac_dump_buf(data, pkt->datalen));
+#endif
+
+ while ((desc->dataflags & CPMAC_OWN) == 0) {
+ skb = cpmac_rx_one(dev, priv, desc);
+ if (likely(skb)) {
+ netif_rx(skb);
+ }
+ desc = desc->next;
+ dma_cache_inv((u32)desc, 16);
+ }
+
+ priv->rx_head = desc;
+ priv->regs->rx_ptr[0] = virt_to_phys(desc);
+ spin_unlock(&priv->lock);
+}
+
+static int cpmac_poll(struct net_device *dev, int *budget)
+{
+ struct sk_buff *skb;
+ struct cpmac_desc *desc;
+ int received = 0, quota = min(dev->quota, *budget);
+ struct cpmac_priv *priv = netdev_priv(dev);
+
+ if (unlikely(!priv->rx_head)) {
+ if (printk_ratelimit())
+ printk(KERN_WARNING "%s: rx: polling, but no queue\n",
+ dev->name);
+ netif_rx_complete(dev);
+ return 0;
+ }
+
+ desc = priv->rx_head;
+ dma_cache_inv((u32)desc, 16);
+
+ while ((received < quota) && ((desc->dataflags & CPMAC_OWN) == 0)) {
+ skb = cpmac_rx_one(dev, priv, desc);
+ if (likely(skb)) {
+ netif_receive_skb(skb);
+ received++;
+ }
+ desc = desc->next;
+ priv->rx_head = desc;
+ dma_cache_inv((u32)desc, 16);
+ }
+
+ *budget -= received;
+ dev->quota -= received;
+#ifdef CPMAC_DEBUG
+ printk("%s: processed %d packets\n", dev->name, received);
+#endif
+ if (desc->dataflags & CPMAC_OWN) {
+ priv->regs->rx_ptr[0] = virt_to_phys(desc);
+ netif_rx_complete(dev);
+ priv->regs->rx_int.enable = 0x1;
+ priv->regs->rx_int.clear = 0xfe;
+ return 0;
+ }
+
+ return 1;
+}
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 20)
+static void
+cpmac_alloc_skbs(struct work_struct *work)
+{
+ struct cpmac_priv *priv = container_of(work, struct cpmac_priv,
+ alloc_work);
+#else
+static void
+cpmac_alloc_skbs(void *data)
+{
+ struct net_device *dev = (struct net_device*)data;
+ struct cpmac_priv *priv = netdev_priv(dev);
+#endif
+ unsigned long flags;
+ int i, num_skbs = 0;
+ struct sk_buff *skb, *skbs = NULL;
+
+ for (i = 0; i < CPMAC_ALLOC_SIZE; i++) {
+ skb = alloc_skb(CPMAC_SKB_SIZE + 2, GFP_KERNEL);
+ if (!skb)
+ break;
+ skb->next = skbs;
+ skb_reserve(skb, 2);
+ skb->dev = priv->dev;
+ num_skbs++;
+ skbs = skb;
+ }
+
+ if (skbs) {
+ spin_lock_irqsave(&priv->lock, flags);
+ for (skb = priv->skb_pool; skb && skb->next; skb = skb->next);
+ if (!skb) {
+ priv->skb_pool = skbs;
+ } else {
+ skb->next = skbs;
+ }
+ priv->free_skbs += num_skbs;
+ spin_unlock_irqrestore(&priv->lock, flags);
+#ifdef CPMAC_DEBUG
+ printk("%s: allocated %d skbs\n", priv->dev->name, num_skbs);
+#endif
+ }
+}
+
+static int cpmac_start_xmit(struct sk_buff *skb, struct net_device *dev) +{
+ unsigned long flags;
+ int len, chan;
+ struct cpmac_desc *desc;
+ struct cpmac_priv *priv = netdev_priv(dev);
+
+ len = skb->len;
+#ifdef CPMAC_DEBUG
+ printk(KERN_DEBUG "%s: len=%d\n", __func__,
len); //cpmac_dump_buf(const uint8_t * buf, unsigned size) +#endif
+ if (unlikely(len < ETH_ZLEN)) {
+ if (unlikely(skb_padto(skb, ETH_ZLEN))) {
+ if (printk_ratelimit())
+ printk(KERN_NOTICE "%s: padding failed, dropping\n",
+ dev->name);
+ spin_lock_irqsave(&priv->lock, flags);
+ priv->stats.tx_dropped++;
+ spin_unlock_irqrestore(&priv->lock, flags);
+ return -ENOMEM;
+ }
+ len = ETH_ZLEN;
+ }
+ spin_lock_irqsave(&priv->lock, flags);
+ chan = priv->tx_tail++;
+ priv->tx_tail %= 8;
+ if (priv->tx_tail == priv->tx_head)
+ netif_stop_queue(dev);
+
+ desc = &priv->desc_ring[chan];
+ dma_cache_inv((u32)desc, 16);
+ if (desc->dataflags & CPMAC_OWN) {
+ printk(KERN_NOTICE "%s: tx dma ring full, dropping\n", dev->name);
+ priv->stats.tx_dropped++;
+ spin_unlock_irqrestore(&priv->lock, flags);
+ return -ENOMEM;
+ }
+
+ dev->trans_start = jiffies;
+ desc->dataflags = CPMAC_SOP | CPMAC_EOP | CPMAC_OWN;
+ desc->skb = skb;
+ desc->hw_data = virt_to_phys(skb->data);
+ dma_cache_wback((u32)skb->data, len);
+ desc->buflen = len;
+ desc->datalen = len;
+ desc->hw_next = 0;
+ dma_cache_wback((u32)desc, 16);
+ priv->regs->tx_ptr[chan] = virt_to_phys(desc);
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ return 0;
+}
+
+static void cpmac_end_xmit(struct net_device *dev, int channel) +{
+ struct cpmac_desc *desc;
+ struct cpmac_priv *priv = netdev_priv(dev);
+
+ spin_lock(&priv->lock);
+ desc = &priv->desc_ring[channel];
+ priv->regs->tx_ack[channel] = virt_to_phys(desc);
+ if (likely(desc->skb)) {
+ priv->stats.tx_packets++;
+ priv->stats.tx_bytes += desc->skb->len;
+ dev_kfree_skb_irq(desc->skb);
+ if (netif_queue_stopped(dev))
+ netif_wake_queue(dev);
+ } else {
+ if (printk_ratelimit())
+ printk(KERN_NOTICE "%s: end_xmit: spurious interrupt\n",
+ dev->name);
+ }
+ spin_unlock(&priv->lock);
+}
+
+static void cpmac_reset(struct net_device *dev)
+{
+ int i;
+ struct cpmac_priv *priv = netdev_priv(dev);
+
+ ar7_device_reset(priv->config->reset_bit);
+ priv->regs->rx_ctrl.control &= ~1;
+ priv->regs->tx_ctrl.control &= ~1;
+ for (i = 0; i < 8; i++) {
+ priv->regs->tx_ptr[i] = 0;
+ priv->regs->rx_ptr[i] = 0;
+ }
+ priv->regs->mac_control &= ~MAC_MII; /* disable mii */
+}
+
+static inline void cpmac_free_rx_ring(struct net_device *dev) +{
+ struct cpmac_desc *desc;
+ int i;
+ struct cpmac_priv *priv = netdev_priv(dev);
+
+ if (unlikely(!priv->rx_head))
+ return;
+
+ desc = priv->rx_head;
+ dma_cache_inv((u32)desc, 16);
+
+ for (i = 0; i < rx_ring_size; i++) {
+ desc->buflen = CPMAC_SKB_SIZE;
+ if ((desc->dataflags & CPMAC_OWN) == 0) {
+ desc->dataflags = CPMAC_OWN;
+ priv->stats.rx_dropped++;
+ }
+ dma_cache_wback((u32)desc, 16);
+ desc = desc->next;
+ dma_cache_inv((u32)desc, 16);
+ }
+}
+
+static irqreturn_t cpmac_irq(int irq, void *dev_id)
+{
+ struct net_device *dev = (struct net_device *)dev_id;
+ struct cpmac_priv *priv = netdev_priv(dev);
+ u32 status;
+
+ if (!dev)
+ return IRQ_NONE;
+
+ status = priv->regs->mac_int_vector;
+
+ if (status & INTST_TX) {
+ cpmac_end_xmit(dev, (status & 7));
+ }
+
+ if (status & INTST_RX) {
+ if (disable_napi) {
+ cpmac_rx(dev);
+ } else {
+ priv->regs->rx_int.enable = 0;
+ priv->regs->rx_int.clear = 0xff;
+ netif_rx_schedule(dev);
+ }
+ }
+
+ priv->regs->mac_eoi_vector = 0;
+
+ if (unlikely(status & (INTST_HOST | INTST_STATUS))) {
+ if (printk_ratelimit()) {
+ printk(KERN_ERR "%s: hw error, resetting...\n", dev->name);
+ }
+ spin_lock(&priv->lock);
+ phy_stop(priv->phy);
+ cpmac_reset(dev);
+ cpmac_free_rx_ring(dev);
+ cpmac_hw_init(dev);
+ spin_unlock(&priv->lock);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static void cpmac_tx_timeout(struct net_device *dev)
+{
+ struct cpmac_priv *priv = netdev_priv(dev);
+ struct cpmac_desc *desc;
+
+ priv->stats.tx_errors++;
+ desc = &priv->desc_ring[priv->tx_head++];
+ priv->tx_head %= 8;
+ printk("%s: transmit timeout\n", dev->name);
+ if (desc->skb)
+ dev_kfree_skb(desc->skb);
+ netif_wake_queue(dev);
+}
+
+static int cpmac_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) +{
+ struct cpmac_priv *priv = netdev_priv(dev);
+ if (!(netif_running(dev)))
+ return -EINVAL;
+ if (!priv->phy)
+ return -EINVAL;
+ if ((cmd == SIOCGMIIPHY) || (cmd == SIOCGMIIREG) ||
+ (cmd == SIOCSMIIREG))
+ return phy_mii_ioctl(priv->phy, if_mii(ifr), cmd);
+
+ return -EINVAL;
+}
+
+static int cpmac_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct cpmac_priv *priv = netdev_priv(dev);
+
+ if (priv->phy)
+ return phy_ethtool_gset(priv->phy, cmd);
+
+ return -EINVAL;
+}
+
+static int cpmac_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct cpmac_priv *priv = netdev_priv(dev);
+
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+
+ if (priv->phy)
+ return phy_ethtool_sset(priv->phy, cmd);
+
+ return -EINVAL;
+}
+
+static void cpmac_get_drvinfo(struct net_device *dev,
+ struct ethtool_drvinfo *info)
+{

+        strcpy(info->driver, "cpmac");
+        strcpy(info->version, "0.0.3");
+        info->fw_version[0] = '\0';
+        sprintf(info->bus_info, "%s", "cpmac");
+        info->regdump_len = 0;
+}
+
+static const struct ethtool_ops cpmac_ethtool_ops = {
+        .get_settings = cpmac_get_settings,
+        .set_settings = cpmac_set_settings,
+        .get_drvinfo = cpmac_get_drvinfo,
+        .get_link = ethtool_op_get_link,

+};
+
+static struct net_device_stats *cpmac_stats(struct net_device *dev) +{
+ struct cpmac_priv *priv = netdev_priv(dev);
+
+ if (netif_device_present(dev))
+ return &priv->stats;
+
+ return NULL;
+}
+
+static int cpmac_change_mtu(struct net_device *dev, int mtu) +{
+ unsigned long flags;
+ struct cpmac_priv *priv = netdev_priv(dev);
+ spinlock_t *lock = &priv->lock;
+
+ if ((mtu < 68) || (mtu > 1500))
+ return -EINVAL;
+
+ spin_lock_irqsave(lock, flags);
+ dev->mtu = mtu;
+ spin_unlock_irqrestore(lock, flags);
+
+ return 0;
+}
+
+static void cpmac_adjust_link(struct net_device *dev)
+{
+ struct cpmac_priv *priv = netdev_priv(dev);
+ unsigned long flags;
+ int new_state = 0;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ if (priv->phy->link) {
+ if (priv->phy->duplex != priv->oldduplex) {
+ new_state = 1;
+ priv->oldduplex = priv->phy->duplex;
+ }
+
+ if (priv->phy->speed != priv->oldspeed) {
+ new_state = 1;
+ priv->oldspeed = priv->phy->speed;
+ }
+
+ if (!priv->oldlink) {
+ new_state = 1;
+ priv->oldlink = 1;
+ netif_schedule(dev);
+ }
+ } else if (priv->oldlink) {
+ new_state = 1;
+ priv->oldlink = 0;
+ priv->oldspeed = 0;
+ priv->oldduplex = -1;
+ }
+
+ if (new_state)
+ phy_print_status(priv->phy);
+
+ spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+static void cpmac_hw_init(struct net_device *dev)
+{
+ int i;
+ struct cpmac_priv *priv = netdev_priv(dev);
+
+ for (i = 0; i < 8; i++)
+ priv->regs->tx_ptr[i] = 0;
+ priv->regs->rx_ptr[0] = virt_to_phys(priv->rx_head);
+
+ priv->regs->mbp = MBP_RXSHORT | MBP_RXBCAST | MBP_RXMCAST;
+ priv->regs->unicast_enable = 0x1;
+ priv->regs->unicast_clear = 0xfe;
+ priv->regs->buffer_offset = 0;
+ for (i = 0; i < 8; i++)
+ priv->regs->mac_addr_low[i] = dev->dev_addr[5];
+ priv->regs->mac_addr_mid = dev->dev_addr[4];
+ priv->regs->mac_addr_high = dev->dev_addr[0] | (dev->dev_addr[1] << 8)
+ | (dev->dev_addr[2] << 16) | (dev->dev_addr[3] << 24);
+ priv->regs->max_len = CPMAC_SKB_SIZE;
+ priv->regs->rx_int.enable = 0x1;
+ priv->regs->rx_int.clear = 0xfe;
+ priv->regs->tx_int.enable = 0xff;
+ priv->regs->tx_int.clear = 0;
+ priv->regs->mac_int_enable = 3;
+ priv->regs->mac_int_clear = 0xfc;
+
+ priv->regs->rx_ctrl.control |= 1;
+ priv->regs->tx_ctrl.control |= 1;
+ priv->regs->mac_control |= MAC_MII | MAC_FDX;
+
+ priv->phy->state = PHY_CHANGELINK;
+ phy_start(priv->phy);
+}
+
+static int cpmac_open(struct net_device *dev)
+{
+ int i, size, res;
+ struct cpmac_priv *priv = netdev_priv(dev);
+ struct cpmac_desc *desc;
+ struct sk_buff *skb;
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 20)
+ priv->phy = phy_connect(dev, priv->phy_name, &cpmac_adjust_link,
+ 0, PHY_INTERFACE_MODE_MII);
+#else
+ priv->phy = phy_connect(dev, priv->phy_name, &cpmac_adjust_link, 0);
+#endif
+ if (IS_ERR(priv->phy)) {
+ printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
+ return PTR_ERR(priv->phy);
+ }
+
+ if (!request_mem_region(dev->mem_start, dev->mem_end -
+ dev->mem_start, dev->name)) {
+ printk("%s: failed to request registers\n",
+ dev->name);
+ res = -ENXIO;
+ goto fail_reserve;
+ }
+
+ priv->regs = ioremap_nocache(dev->mem_start, dev->mem_end -
+ dev->mem_start);
+ if (!priv->regs) {
+ printk("%s: failed to remap registers\n", dev->name);
+ res = -ENXIO;
+ goto fail_remap;
+ }
+
+ priv->rx_head = NULL;
+ size = sizeof(struct cpmac_desc) * (rx_ring_size +
+ CPMAC_TX_RING_SIZE);
+ priv->desc_ring = (struct cpmac_desc *)kmalloc(size, GFP_KERNEL);
+ if (!priv->desc_ring) {
+ res = -ENOMEM;
+ goto fail_alloc;
+ }
+
+ memset((char *)priv->desc_ring, 0, size);
+
+ priv->skb_pool = NULL;
+ priv->free_skbs = 0;
+ priv->rx_head = &priv->desc_ring[CPMAC_TX_RING_SIZE];
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 20)
+ INIT_WORK(&priv->alloc_work, cpmac_alloc_skbs);
+#else
+ INIT_WORK(&priv->alloc_work, cpmac_alloc_skbs, dev);
+#endif
+ schedule_work(&priv->alloc_work);
+ flush_scheduled_work();
+
+ for (i = 0; i < rx_ring_size; i++) {
+ desc = &priv->rx_head[i];
+ skb = cpmac_get_skb(dev);
+ if (!skb) {
+ res = -ENOMEM;
+ goto fail_desc;
+ }
+ desc->skb = skb;
+ desc->hw_data = virt_to_phys(skb->data);
+ desc->buflen = CPMAC_SKB_SIZE;
+ desc->dataflags = CPMAC_OWN;
+ desc->next = &priv->rx_head[(i + 1) % rx_ring_size];
+ desc->hw_next = virt_to_phys(desc->next);
+ dma_cache_wback((u32)desc, 16);
+ }
+
+ if((res = request_irq(dev->irq, cpmac_irq, SA_INTERRUPT,
+ dev->name, dev))) {
+ printk("%s: failed to obtain irq\n", dev->name);
+ goto fail_irq;
+ }
+
+ cpmac_reset(dev);
+ cpmac_hw_init(dev);
+
+ netif_start_queue(dev);
+ return 0;
+
+fail_irq:
+fail_desc:
+ for (i = 0; i < rx_ring_size; i++)
+ if (priv->rx_head[i].skb)
+ kfree_skb(priv->rx_head[i].skb);
+fail_alloc:
+ kfree(priv->desc_ring);
+
+ for (skb = priv->skb_pool; skb; skb = priv->skb_pool) {
+ priv->skb_pool = skb->next;
+ kfree_skb(skb);
+ }
+
+ iounmap(priv->regs);
+
+fail_remap:
+ release_mem_region(dev->mem_start, dev->mem_end -
+ dev->mem_start);
+
+fail_reserve:
+ phy_disconnect(priv->phy);
+
+ return res;
+}
+
+static int cpmac_stop(struct net_device *dev)
+{
+ int i;
+ struct sk_buff *skb;
+ struct cpmac_priv *priv = netdev_priv(dev);
+
+ netif_stop_queue(dev);
+
+ phy_stop(priv->phy);
+ phy_disconnect(priv->phy);
+ priv->phy = NULL;
+
+ cpmac_reset(dev);
+
+ for (i = 0; i < 8; i++) {
+ priv->regs->rx_ptr[i] = 0;
+ priv->regs->tx_ptr[i] = 0;
+ priv->regs->mbp = 0;
+ }
+
+ free_irq(dev->irq, dev);
+ release_mem_region(dev->mem_start, dev->mem_end -
+ dev->mem_start);
+
+ cancel_delayed_work(&priv->alloc_work);
+ flush_scheduled_work();
+
+ priv->rx_head = &priv->desc_ring[CPMAC_TX_RING_SIZE];
+ for (i = 0; i < rx_ring_size; i++)
+ if (priv->rx_head[i].skb)
+ kfree_skb(priv->rx_head[i].skb);
+
+ kfree(priv->desc_ring);
+
+ for (skb = priv->skb_pool; skb; skb = priv->skb_pool) {
+ priv->skb_pool = skb->next;
+ kfree_skb(skb);
+ }
+
+ return 0;
+}
+
+static int external_switch = 0;
+
+static int __devinit cpmac_probe(struct platform_device *pdev) +{
+ int i, rc, phy_id;
+ struct resource *res;
+ struct cpmac_priv *priv;
+ struct net_device *dev;
+ struct plat_cpmac_data *pdata;
+
+ if (strcmp(pdev->name, "cpmac") != 0)
+ return -ENODEV;
+
+ pdata = pdev->dev.platform_data;
+
+ for (phy_id = 0; phy_id < PHY_MAX_ADDR; phy_id++) {
+ if (!(pdata->phy_mask & (1 << phy_id)))
+ continue;
+ if (!cpmac_mii.phy_map[phy_id])
+ continue;
+ break;
+ }
+
+ if (phy_id == PHY_MAX_ADDR) {
+ if (external_switch) {
+ phy_id = 0;
+ } else {
+ printk("cpmac: no PHY present\n");
+ return -ENODEV;
+ }
+ }
+
+ dev = alloc_etherdev(sizeof(struct cpmac_priv));
+
+ if (!dev) {
+ printk(KERN_ERR "cpmac: Unable to allocate net_device structure!\n");
+ return -ENOMEM;
+ }
+
+ SET_MODULE_OWNER(dev);
+ platform_set_drvdata(pdev, dev);
+ priv = netdev_priv(dev);
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs");
+ if (!res) {
+ rc = -ENODEV;
+ goto fail;
+ }
+
+ dev->mem_start = res->start;
+ dev->mem_end = res->end;
+ dev->irq = platform_get_irq_byname(pdev, "irq");
+

+	dev->mtu                = 1500;
+	dev->open               = cpmac_open;
+	dev->stop               = cpmac_stop;
+	dev->set_config         = cpmac_config;
+	dev->hard_start_xmit    = cpmac_start_xmit;
+	dev->do_ioctl           = cpmac_ioctl;
+	dev->get_stats          = cpmac_stats;
+	dev->change_mtu         = cpmac_change_mtu;  
+	dev->set_mac_address    = cpmac_set_mac_address;  

+ dev->set_multicast_list = cpmac_set_multicast_list;
+ dev->tx_timeout = cpmac_tx_timeout;
+ dev->ethtool_ops = &cpmac_ethtool_ops;
+ if (!disable_napi) {
+ dev->poll = cpmac_poll;
+ dev->weight = min(rx_ring_size, 64);
+ }
+
+ memset(priv, 0, sizeof(struct cpmac_priv));
+ spin_lock_init(&priv->lock);
+ priv->msg_enable = netif_msg_init(NETIF_MSG_WOL, 0x3fff);
+ priv->config = pdata;
+ priv->dev = dev;
+ memcpy(dev->dev_addr, priv->config->dev_addr, sizeof(dev->dev_addr));
+ if (phy_id == 31) {
+ snprintf(priv->phy_name, BUS_ID_SIZE, PHY_ID_FMT,
+ cpmac_mii.id, phy_id);
+ } else {
+ snprintf(priv->phy_name, BUS_ID_SIZE, "fixed@%d:%d", 100, 1);
+ }
+
+ if ((rc = register_netdev(dev))) {
+ printk("cpmac: error %i registering device %s\n",
+ rc, dev->name);
+ goto fail;
+ }
+
+ printk("cpmac: device %s (regs: %p, irq: %d, phy: %s, mac: ",
+ dev->name, (u32 *)dev->mem_start, dev->irq,
+ priv->phy_name);
+ for (i = 0; i < 6; i++) {
+ printk("%02x", dev->dev_addr[i]);
+ if (i < 5) printk(":");
+ else printk(")\n");
+ }
+
+ return 0;
+
+fail:
+ free_netdev(dev);
+ return rc;
+}
+
+static int __devexit cpmac_remove(struct platform_device *pdev) +{
+ struct net_device *dev = platform_get_drvdata(pdev);
+ unregister_netdev(dev);
+ free_netdev(dev);
+ return 0;
+}
+
+static struct platform_driver cpmac_driver = {
+ .driver.name = "cpmac",
+ .probe = cpmac_probe,
+ .remove = cpmac_remove,
+};
+
+int __devinit cpmac_init(void)
+{
+ volatile u32 mask;
+ int i, res;
+ cpmac_mii.priv = (struct cpmac_mdio_regs *)
+ ioremap_nocache(AR7_REGS_MDIO, sizeof(struct cpmac_mdio_regs));
+
+ if (!cpmac_mii.priv) {
+ printk("Can't ioremap mdio registers\n");
+ return -ENXIO;
+ }
+
+#warning FIXME: unhardcode gpio&reset bits
+ ar7_gpio_disable(26);
+ ar7_gpio_disable(27);
+ ar7_device_reset(AR7_RESET_BIT_CPMAC_LO);
+ ar7_device_reset(AR7_RESET_BIT_CPMAC_HI);
+ ar7_device_reset(AR7_RESET_BIT_EPHY);
+
+ cpmac_mii.reset(&cpmac_mii);
+
+ for (i = 0; i < 300000; i++) {
+ mask = ((struct cpmac_mdio_regs *)cpmac_mii.priv)->alive;
+ if (mask)
+ break;
+ }
+
+ mask &= 0x7fffffff;
+ if (mask & (mask - 1)) {
+ external_switch = 1;
+ mask = 0;
+ }
+
+ cpmac_mii.phy_mask = ~(mask | 0x80000000);
+
+ res = mdiobus_register(&cpmac_mii);
+ if (res)
+ goto fail_mii;
+
+ res = platform_driver_register(&cpmac_driver);
+ if (res)
+ goto fail_cpmac;
+
+ return 0;
+
+fail_cpmac:
+ mdiobus_unregister(&cpmac_mii);
+
+fail_mii:
+ iounmap(cpmac_mii.priv);
+
+ return res;
+}
+
+void __devexit cpmac_exit(void)
+{
+ platform_driver_unregister(&cpmac_driver);
+ mdiobus_unregister(&cpmac_mii);
+}
+
+module_init(cpmac_init);
+module_exit(cpmac_exit);
diff -urN linux-2.6.22.1/include/asm-mips/ar7/ar7.h linux-ar7/include/asm-mips/ar7/ar7.h
--- linux-2.6.22.1/include/asm-mips/ar7/ar7.h 1970-01-01 01:00:00.000000000
+0100
+++ linux-ar7/include/asm-mips/ar7/ar7.h 2007-08-09 16:22:39.000000000 +0200
@@ -0,0 +1,162 @@
+/*
+ * $Id: ar7.h 8280 2007-07-31 15:52:06Z florian $
+ *
+ * Copyright (C) 2006, 2007 OpenWrt.org
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef __AR7_H__
+#define __AR7_H__
+
+#include <linux/delay.h>
+#include <asm/addrspace.h>
+#include <asm/io.h>
+
+#define AR7_REGS_BASE 0x08610000
+

+#define AR7_REGS_MAC0   (AR7_REGS_BASE + 0x0000)
+#define AR7_REGS_GPIO   (AR7_REGS_BASE + 0x0900)
+#define AR7_REGS_POWER  (AR7_REGS_BASE + 0x0a00) // 0x08610A00 - 0x08610BFF 

(512 bytes, 128 bytes / clock)
+#define AR7_REGS_UART0 (AR7_REGS_BASE + 0x0e00)
+#define AR7_REGS_RESET (AR7_REGS_BASE + 0x1600)
+#define AR7_REGS_VLYNQ0 (AR7_REGS_BASE + 0x1800)
+#define AR7_REGS_DCL (AR7_REGS_BASE + 0x1A00)
+#define AR7_REGS_VLYNQ1 (AR7_REGS_BASE + 0x1C00)

+#define AR7_REGS_MDIO   (AR7_REGS_BASE + 0x1E00)
+#define AR7_REGS_IRQ    (AR7_REGS_BASE + 0x2400)
+#define AR7_REGS_MAC1   (AR7_REGS_BASE + 0x2800)
+
+#define AR7_REGS_WDT    (AR7_REGS_BASE + 0x1f00)
+#define UR8_REGS_WDT    (AR7_REGS_BASE + 0x0b00)
+#define UR8_REGS_UART1  (AR7_REGS_BASE + 0x0f00)
+
+#define  AR7_RESET_PEREPHERIAL 0x0
+#define  AR7_RESET_SOFTWARE    0x4
+#define  AR7_RESET_STATUS      0x8

+
+#define AR7_RESET_BIT_CPMAC_LO 17
+#define AR7_RESET_BIT_CPMAC_HI 21
+#define AR7_RESET_BIT_MDIO 22
+#define AR7_RESET_BIT_EPHY 26
+
+/* GPIO control registers */

+#define  AR7_GPIO_INPUT  0x0
+#define  AR7_GPIO_OUTPUT 0x4
+#define  AR7_GPIO_DIR    0x8
+#define  AR7_GPIO_ENABLE 0xC

+
+#define AR7_CHIP_7100 0x18
+#define AR7_CHIP_7200 0x2b
+#define AR7_CHIP_7300 0x05
+
+/* Interrupts */
+#define AR7_IRQ_UART0 15
+#define AR7_IRQ_UART1 16
+
+struct plat_cpmac_data {
+ int reset_bit;
+ int power_bit;
+ u32 phy_mask;
+ char dev_addr[6];
+};
+
+struct plat_dsl_data {
+ int reset_bit_dsl;
+ int reset_bit_sar;
+};
+
+extern int ar7_cpu_clock, ar7_bus_clock, ar7_dsp_clock;
+
+static inline u16 ar7_chip_id(void)
+{
+ return readl((void *)KSEG1ADDR(AR7_REGS_GPIO + 0x14)) & 0xffff;
+}
+
+static inline u8 ar7_chip_rev(void)
+{
+ return (readl((void *)KSEG1ADDR(AR7_REGS_GPIO + 0x14)) >> 16) & 0xff;
+}
+
+static inline int ar7_cpu_freq(void)
+{
+ return ar7_cpu_clock;
+}
+
+static inline int ar7_bus_freq(void)
+{
+ return ar7_bus_clock;
+}
+
+static inline int ar7_vbus_freq(void)
+{
+ return ar7_bus_clock / 2;
+}
+#define ar7_cpmac_freq ar7_vbus_freq
+
+static inline int ar7_dsp_freq(void)
+{
+ return ar7_dsp_clock;
+}
+
+static inline int ar7_has_high_cpmac(void)
+{
+ u16 chip_id = ar7_chip_id();
+ switch (chip_id) {
+ case AR7_CHIP_7100:
+ case AR7_CHIP_7200:
+ return 0;
+ default:
+ return 1;
+ }
+}
+#define ar7_has_high_vlynq ar7_has_high_cpmac
+#define ar7_has_second_uart ar7_has_high_cpmac
+
+static inline void ar7_device_enable(u32 bit)
+{
+ void *reset_reg = (void *)KSEG1ADDR(AR7_REGS_RESET + AR7_RESET_PEREPHERIAL);
+ writel(readl(reset_reg) | (1 << bit), reset_reg);
+ mdelay(20);
+}
+
+static inline void ar7_device_disable(u32 bit)
+{
+ void *reset_reg = (void *)KSEG1ADDR(AR7_REGS_RESET + AR7_RESET_PEREPHERIAL);
+ writel(readl(reset_reg) & ~(1 << bit), reset_reg);
+ mdelay(20);
+}
+
+static inline void ar7_device_reset(u32 bit)
+{
+ ar7_device_disable(bit);
+ ar7_device_enable(bit);
+}
+
+static inline void ar7_device_on(u32 bit)
+{
+ void *power_reg = (void *)KSEG1ADDR(AR7_REGS_POWER);
+ writel(readl(power_reg) | (1 << bit), power_reg);
+ mdelay(20);
+}
+
+static inline void ar7_device_off(u32 bit)
+{
+ void *power_reg = (void *)KSEG1ADDR(AR7_REGS_POWER);
+ writel(readl(power_reg) & ~(1 << bit), power_reg);
+ mdelay(20);
+}
+
+#endif /* __AR7_H__ */
diff -urN linux-2.6.22.1/include/asm-mips/ar7/gpio.h linux-ar7/include/asm-mips/ar7/gpio.h
--- linux-2.6.22.1/include/asm-mips/ar7/gpio.h 1970-01-01 01:00:00.000000000
+0100
+++ linux-ar7/include/asm-mips/ar7/gpio.h 2007-08-09 16:22:39.000000000 +0200
@@ -0,0 +1,116 @@
+/*
+ * $Id: gpio.h 6693 2007-03-25 05:42:16Z ejka $
+ *
+ * Copyright (C) 2007 OpenWrt.org
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef __AR7_GPIO_H__
+#define __AR7_GPIO_H__
+#include <asm/ar7/ar7.h>
+
+#define AR7_GPIO_MAX 32
+
+extern int gpio_request(unsigned gpio, char *label);
+extern void gpio_free(unsigned gpio);
+
+/* Common GPIO layer */
+static inline int gpio_direction_input(unsigned gpio)
+{
+ void __iomem *gpio_dir = (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO +
AR7_GPIO_DIR);
+
+ if (gpio >= AR7_GPIO_MAX)
+ return -EINVAL;
+
+ writel(readl(gpio_dir) | (1 << gpio), gpio_dir);
+
+ return 0;
+}
+
+static inline int gpio_direction_output(unsigned gpio)
+{
+ void __iomem *gpio_dir = (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO +
AR7_GPIO_DIR);
+
+ if (gpio >= AR7_GPIO_MAX)
+ return -EINVAL;
+
+ writel(readl(gpio_dir) & ~(1 << gpio), gpio_dir);
+
+ return 0;
+}
+
+static inline int gpio_get_value(unsigned gpio)
+{
+ void __iomem *gpio_in = (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO +
AR7_GPIO_INPUT);
+
+ if (gpio >= AR7_GPIO_MAX)
+ return -EINVAL;
+
+ return ((readl(gpio_in) & (1 << gpio)) != 0);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+ void __iomem *gpio_out = (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO +
AR7_GPIO_OUTPUT);
+ volatile unsigned tmp;
+
+ if (gpio >= AR7_GPIO_MAX)
+ return;
+
+ tmp = readl(gpio_out) & ~(1 << gpio);
+ if (value)
+ tmp |= 1 << gpio;
+ writel(tmp, gpio_out);
+}
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+ return -EINVAL;
+}
+
+static inline int irq_to_gpio(unsigned irq)
+{
+ return -EINVAL;
+}
+
+/* Board specific GPIO functions */
+static inline int ar7_gpio_enable(unsigned gpio)
+{
+ void __iomem *gpio_en = (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO +
AR7_GPIO_ENABLE);
+
+ if (gpio >= AR7_GPIO_MAX)
+ return -EINVAL;
+
+ writel(readl(gpio_en) | (1 << gpio), gpio_en);
+
+ return 0;
+}
+
+static inline int ar7_gpio_disable(unsigned gpio)
+{
+ void __iomem *gpio_en = (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO +
AR7_GPIO_ENABLE);
+
+ if (gpio >= AR7_GPIO_MAX)
+ return -EINVAL;
+
+ writel(readl(gpio_en) & ~(1 << gpio), gpio_en);
+
+ return 0;
+}
+
+#include <asm-generic/gpio.h>
+
+#endif
diff -urN linux-2.6.22.1/include/asm-mips/ar7/mmzone.h linux-ar7/include/asm-mips/ar7/mmzone.h
--- linux-2.6.22.1/include/asm-mips/ar7/mmzone.h 1970-01-01 01:00:00.000000000
+0100
+++ linux-ar7/include/asm-mips/ar7/mmzone.h 2007-08-09 16:22:39.000000000
+0200
@@ -0,0 +1,29 @@
+/*
+ * $Id: mmzone.h 6600 2007-03-18 09:40:51Z ejka $
+ *
+ * Copyright (C) 2007 OpenWrt.org
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef _ASM_MACH_MMZONE_H
+#define _ASM_MACH_MMZONE_H
+
+extern pg_data_t __node_data[];
+#define NODE_DATA(nid) (&__node_data[nid])
+#define NODE_MEM_MAP(nid) (NODE_DATA(nid)->node_mem_map)
+#define pa_to_nid(addr) (((addr) >= ARCH_PFN_OFFSET << PAGE_SHIFT) ? 0 : -1) +
+#endif /* _ASM_MACH_MMZONE_H */
diff -urN linux-2.6.22.1/include/asm-mips/ar7/prom.h linux-ar7/include/asm-mips/ar7/prom.h
--- linux-2.6.22.1/include/asm-mips/ar7/prom.h 1970-01-01 01:00:00.000000000
+0100
+++ linux-ar7/include/asm-mips/ar7/prom.h 2007-08-09 16:22:39.000000000 +0200
@@ -0,0 +1,27 @@
+/*
+ * $Id: prom.h 8190 2007-07-27 03:48:54Z nico $
+ *
+ * Copyright (C) 2006, 2007 OpenWrt.org
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef __PROM_H__
+#define __PROM_H__
+
+extern char *prom_getenv(char *name);
+extern void prom_printf(char *fmt, ...);
+
+#endif /* __PROM_H__ */
diff -urN linux-2.6.22.1/include/asm-mips/ar7/spaces.h linux-ar7/include/asm-mips/ar7/spaces.h
--- linux-2.6.22.1/include/asm-mips/ar7/spaces.h 1970-01-01 01:00:00.000000000
+0100
+++ linux-ar7/include/asm-mips/ar7/spaces.h 2007-08-09 16:22:39.000000000
+0200
@@ -0,0 +1,32 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994 - 1999, 2000, 03, 04 Ralf Baechle
+ * Copyright (C) 2000, 2002 Maciej W. Rozycki
+ * Copyright (C) 1990, 1999, 2000 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_AR7_SPACES_H
+#define _ASM_AR7_SPACES_H
+
+#define CAC_BASE 0x80000000
+#define IO_BASE 0xa0000000
+#define UNCAC_BASE 0xa0000000
+#define MAP_BASE 0xc0000000
+
+/*
+ * This handles the memory map.
+ * We handle pages at KSEG0 for kernels with 32 bit address space.
+ */
+#define PAGE_OFFSET 0x94000000UL
+#define PHYS_OFFSET 0x14000000UL
+
+/*
+ * Memory above this physical address will be considered highmem.
+ */
+#ifndef HIGHMEM_START
+#define HIGHMEM_START 0x40000000UL
+#endif
+
+#endif /* __ASM_AR7_SPACES_H */
diff -urN linux-2.6.22.1/include/asm-mips/ar7/vlynq.h linux-ar7/include/asm-mips/ar7/vlynq.h
--- linux-2.6.22.1/include/asm-mips/ar7/vlynq.h 1970-01-01 01:00:00.000000000
+0100
+++ linux-ar7/include/asm-mips/ar7/vlynq.h 2007-08-09 16:22:39.000000000 +0200
@@ -0,0 +1,92 @@
+/*
+ * $Id: vlynq.h 8190 2007-07-27 03:48:54Z nico $
+ *
+ * Copyright (C) 2006, 2007 OpenWrt.org
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+
+#ifndef __VLYNQ_H__
+#define __VLYNQ_H__
+
+struct vlynq_mapping {
+ u32 size;
+ u32 offset;
+} __attribute__ ((packed));
+
+struct vlynq_device_id {
+ u32 id;
+};
+
+struct vlynq_regs;
+struct vlynq_device {
+ u32 id;
+ int irq;
+ int local_irq;
+ int remote_irq;
+ int clock_div;
+ u32 regs_start, regs_end;
+ u32 mem_start, mem_end;
+ u32 irq_start, irq_end;
+ void *priv;
+ struct vlynq_regs *local;
+ struct vlynq_regs *remote;
+ struct device dev;
+};
+
+struct vlynq_driver {
+ char *name;
+ int (*probe)(struct vlynq_device *dev);
+ int (*remove)(struct vlynq_device *dev);
+ struct device_driver driver;
+};
+
+#define to_vlynq_driver(drv) container_of(drv, struct vlynq_driver, driver) +
+struct plat_vlynq_ops {
+ int (*on)(struct vlynq_device *dev);
+ void (*off)(struct vlynq_device *dev);
+};
+
+#define to_vlynq_device(device) container_of(device, struct vlynq_device, dev)
+
+extern struct bus_type vlynq_bus_type;
+
+extern int __vlynq_register_driver(struct vlynq_driver *driver,
+ struct module *owner);
+
+static inline int vlynq_register_driver(struct vlynq_driver *driver) +{
+ return __vlynq_register_driver(driver, THIS_MODULE);
+}
+
+extern void vlynq_unregister_driver(struct vlynq_driver *driver); +extern int vlynq_device_enable(struct vlynq_device *dev); +extern void vlynq_device_disable(struct vlynq_device *dev); +extern u32 vlynq_local_id(struct vlynq_device *dev);
+extern u32 vlynq_remote_id(struct vlynq_device *dev);
+extern void vlynq_set_local_mapping(struct vlynq_device *dev,
+ u32 tx_offset,
+ struct vlynq_mapping *mapping);
+extern void vlynq_set_remote_mapping(struct vlynq_device *dev,
+ u32 tx_offset,
+ struct vlynq_mapping *mapping);
+extern int vlynq_virq_to_irq(struct vlynq_device *dev, int virq); +extern int vlynq_irq_to_virq(struct vlynq_device *dev, int irq); +extern int vlynq_set_local_irq(struct vlynq_device *dev, int virq); +extern int vlynq_set_remote_irq(struct vlynq_device *dev, int virq); +
+#endif /* __VLYNQ_H__ */

Hi Matteo,

I see some things to take into account for a review to be easier :

- split the patch into parts : linux-mips, netdev, watchdog, mtd, led subsystems with the appropriate lists/maintainers in copy
- add the other authors in the Signed-off-by line : Eugene Konev, Felix Fietkau, Nicolas Thill
- use a linux-mips git snapshot and rediff against it

Thank you very much for your efforts.

Le lundi 20 août 2007, Matteo Croce a écrit :

Cordialement, Florian Fainelli
------------------------------

I have followed Florian's instructions, and that are the patches for the AR7

These are patch for the AR7 router board:
core, serial hack, mtd partition map, ethernet, gpio pins, watchdog and leds watchdog and cpmac doesn't works well and needs some changes
I CC'ed some people that would be interested

Partition map support

index fbec8cd..c1b2508 100644
@@ -150,6 +150,12 @@ config MTD_AFS_PARTS
 	  for your particular device. It won't happen automatically. The
 	  'armflash' map driver (CONFIG_MTD_ARMFLASH) does this, for example.
 
+config MTD_AR7_PARTS
+	tristate "TI AR7 partitioning support"
+	depends on MTD_PARTITIONS
+	---help---
+	  TI AR7 partitioning support
+
 comment "User Modules And Translation Layers"
 
 config MTD_CHAR

index 6d958a4..8451c64 100644
@@ -11,6 +11,7 @@ obj-$(CONFIG_MTD_CONCAT)	+= mtdconcat.o
 obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o
 obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
 obj-$(CONFIG_MTD_AFS_PARTS)	+= afs.o
+obj-$(CONFIG_MTD_AR7_PARTS)	+= ar7part.o
 
 # 'Users' - code which presents functionality to userspace.
 obj-$(CONFIG_MTD_CHAR)		+= mtdchar.o

index 28c5ffd..4e41717 100644
@@ -74,7 +74,8 @@ static int physmap_flash_remove(struct platform_device *dev)
 
 static const char *rom_probe_types[] = { "cfi_probe", "jedec_probe", "map_rom", NULL };
 #ifdef CONFIG_MTD_PARTITIONS
-static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", NULL };
+static const char *part_probe_types[] =
+				{ "cmdlinepart", "RedBoot", "ar7part", NULL };
 #endif
 
 static int physmap_flash_probe(struct platform_device *dev)

Char device to access GPIO pins

index b391776..d56cfd7 100644
@@ -928,6 +928,15 @@ config MWAVE
 	  To compile this driver as a module, choose M here: the
 	  module will be called mwave.
 
+config AR7_GPIO
+	tristate "TI AR7 GPIO Support"
+	depends on AR7
+	help
+	  Give userspace access to the GPIO pins on the Texas Instruments AR7
+	  processors.
+
+	  If compiled as a module, it will be called ar7_gpio.
+
 config SCx200_GPIO
 	tristate "NatSemi SCx200 GPIO Support"
 	depends on SCx200

index d68ddbe..804319e 100644
@@ -89,6 +89,7 @@ obj-$(CONFIG_COBALT_LCD)	+= lcd.o
 obj-$(CONFIG_PPDEV)		+= ppdev.o
 obj-$(CONFIG_NWBUTTON)		+= nwbutton.o
 obj-$(CONFIG_NWFLASH)		+= nwflash.o
+obj-$(CONFIG_AR7_GPIO)		+= ar7_gpio.o
 obj-$(CONFIG_SCx200_GPIO)	+= scx200_gpio.o
 obj-$(CONFIG_PC8736x_GPIO)	+= pc8736x_gpio.o
 obj-$(CONFIG_NSC_GPIO)		+= nsc_gpio.o

Support for the leds in front of the board usually used to show power status, network traffic, connected eth devices etc.

index 4468cb3..b1c7a32 100644
@@ -18,6 +18,12 @@ config LEDS_CLASS
 
 comment "LED drivers"
 
+config LEDS_AR7
+	tristate "LED Support for the TI AR7"
+	depends LEDS_CLASS && AR7
+	help
+	  This option enables support for the LEDs on TI AR7.
+
 config LEDS_CORGI
 	tristate "LED Support for the Sharp SL-C7x0 series"
 	depends on LEDS_CLASS && PXA_SHARP_C7xx

index f8995c9..6d78192 100644
@@ -5,6 +5,7 @@ obj-$(CONFIG_LEDS_CLASS)		+= led-class.o
 obj-$(CONFIG_LEDS_TRIGGERS)		+= led-triggers.o
 
 # LED Platform Drivers
+obj-$(CONFIG_LEDS_AR7)			+= leds-ar7.o
 obj-$(CONFIG_LEDS_CORGI)		+= leds-corgi.o
 obj-$(CONFIG_LEDS_LOCOMO)		+= leds-locomo.o
 obj-$(CONFIG_LEDS_SPITZ)		+= leds-spitz.o

Driver for the watchdog timer. It worked with 2.4, doesn't does with 2.6. Apart that it doesn't reboots the device it works :)

index 37bddc1..78d4940 100644
@@ -583,6 +583,12 @@ config SBC_EPX_C3_WATCHDOG
 
 # MIPS Architecture
 
+config AR7_WDT
+	tristate "TI AR7 Watchdog Timer"
+	depends on WATCHDOG && AR7
+	help
+	  Hardware driver for the TI AR7 Watchdog Timer.
+
 config INDYDOG
 	tristate "Indy/I2 Hardware Watchdog"
 	depends on SGI_IP22

index 389f8b1..76424f2 100644
@@ -87,6 +87,7 @@ obj-$(CONFIG_SBC_EPX_C3_WATCHDOG) += sbc_epx_c3.o
 # M68KNOMMU Architecture
 
 # MIPS Architecture
+obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
 obj-$(CONFIG_INDYDOG) += indydog.o
 obj-$(CONFIG_WDT_MTX1)	+= mtx-1_wdt.o
 obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o

Hi Matteo,

Can you please explain this a bit more? Is this driver working under 2.4 (and also rebooting the device) but not under 2.6?

Thanks in advance,
Wim.

Il Sunday 09 September 2007 10:47:52 hai scritto:

Exactly.
A guy had it working with the attached patch but it doesn't works for me.

Cheers,
Matteo

Index: target/linux/ar7-2.6/files/drivers/char/watchdog/ar7_wdt.c
===================================================================
@@ -76,7 +76,6 @@
 // Offset of the WDT registers
 static unsigned long ar7_regs_wdt;
 // Pointer to the remapped WDT IO space
-static ar7_wdt_t *ar7_wdt;
 static void ar7_wdt_get_regs(void)
 {
     u16 chip_id = ar7_chip_id();

@@ -94,6 +93,8 @@
                      
 static void ar7_wdt_kick(u32 value)
 {
+	volatile ar7_wdt_t *ar7_wdt = (ar7_wdt_t *)ioremap(ar7_regs_wdt, sizeof(ar7_wdt_t));
+
 	ar7_wdt->kick_lock = 0x5555;
 	if ((ar7_wdt->kick_lock & 3) == 1) {
 		ar7_wdt->kick_lock = 0xAAAA;

@@ -107,6 +108,8 @@
 
 static void ar7_wdt_prescale(u32 value)
 {
+	volatile ar7_wdt_t *ar7_wdt = (ar7_wdt_t *)ioremap(ar7_regs_wdt, sizeof(ar7_wdt_t));
+
 	ar7_wdt->prescale_lock = 0x5A5A;
 	if ((ar7_wdt->prescale_lock & 3) == 1) {
 		ar7_wdt->prescale_lock = 0xA5A5;

@@ -120,6 +123,8 @@
 
 static void ar7_wdt_change(u32 value)
 {
+	volatile ar7_wdt_t *ar7_wdt = (ar7_wdt_t *)ioremap(ar7_regs_wdt, sizeof(ar7_wdt_t));
+
 	ar7_wdt->change_lock = 0x6666;
 	if ((ar7_wdt->change_lock & 3) == 1) {
 		ar7_wdt->change_lock = 0xBBBB;

@@ -133,6 +138,8 @@
 
 static void ar7_wdt_disable(u32 value)
 {
+	volatile ar7_wdt_t *ar7_wdt = (ar7_wdt_t *)ioremap(ar7_regs_wdt, sizeof(ar7_wdt_t));
+
 	ar7_wdt->disable_lock = 0x7777;
 	if ((ar7_wdt->disable_lock & 3) == 1) {
 		ar7_wdt->disable_lock = 0xCCCC;

@@ -215,9 +222,6 @@
 static ssize_t ar7_wdt_write(struct file *file, const char *data, 
 			     size_t len, loff_t *ppos)
 {
-	if (ppos != &file->f_pos)
-		return -ESPIPE;
-
 	/* check for a magic close character */
 	if (len) {
 		size_t i;

@@ -304,8 +308,6 @@
 		return -EBUSY;
 	}
 
-	ar7_wdt = (ar7_wdt_t *)ioremap(ar7_regs_wdt, sizeof(ar7_wdt_t));
-
 	ar7_wdt_disable_wdt();
 	ar7_wdt_prescale(prescale_value);
 	ar7_wdt_update_margin(margin);

@@ -337,7 +339,6 @@
 {
         unregister_reboot_notifier(&ar7_wdt_notifier);
 	misc_deregister(&ar7_wdt_miscdev);
-    iounmap(ar7_wdt);
 	release_mem_region(ar7_regs_wdt, sizeof(ar7_wdt_t));
 }
 

Index: target/linux/ar7-2.6/config/default
===================================================================
@@ -3,7 +3,7 @@
 # CONFIG_64BIT_PHYS_ADDR is not set
 CONFIG_AR7=y
 CONFIG_AR7_GPIO=y
-# CONFIG_AR7_WDT is not set
+CONFIG_AR7_WDT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set

Hi all,

The thing is that the different TNETD versions : 7100, 7200 and 7300 should not have the same watchdog handling.

Right now, we have no easy way to figure out what is different from one version to another.

Le dimanche 9 septembre 2007, Matteo Croce a écrit :

Cordialement, Florian Fainelli
------------------------------

you just need to use the right address, 7100/7200 have a different address where the watchdog is (0x18611F00) than the 7300 (0x18610B00). Usage of the watchdog is the same.

Thomas.

Crap can work. Given enough thrust pigs will fly, but it's not necessary a
good idea.                                                [ RFC1925, 2.3 ]

got the addresses wrong, they are 0x08611f00 and 0x08610b00 (both physical addresses).

Thomas.

Crap can work. Given enough thrust pigs will fly, but it's not necessary a
good idea.                                                [ RFC1925, 2.3 ]

Il Monday 10 September 2007 11:00:23 Thomas Bogendoerfer ha scritto:

If you read the ar7.h include file you will find:

#define AR7_REGS_BASE 0x08610000

#define AR7_REGS_WDT (AR7_REGS_BASE + 0x1f00)
#define UR8_REGS_WDT (AR7_REGS_BASE + 0x0b00)

So they are correct

well 7300 is not UR8, but ar7_wdt_get_regs() looks correct.

Thomas.

Crap can work. Given enough thrust pigs will fly, but it's not necessary a
good idea.                                                [ RFC1925, 2.3 ]

Hi Matteo,

I'll have a look at the driver this weekend.

Greetings,
Wim.

Serial support, should not broke other archs

index f94109c..94253b7 100644
@@ -267,6 +267,13 @@ static const struct serial8250_config uart_config[] = {
 		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
 		.flags		= UART_CAP_FIFO,
 	},
+	[PORT_AR7] = {
+		.name		= "TI-AR7",
+		.fifo_size	= 16,
+		.tx_loadsz	= 16,
+		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_00,
+		.flags		= UART_CAP_FIFO | UART_CAP_AFE,
+	},
 };
 
 #if defined (CONFIG_SERIAL_8250_AU1X00)

@@ -2453,7 +2460,11 @@ static void serial8250_console_putchar(struct uart_port *port, int ch)
 {
 	struct uart_8250_port *up = (struct uart_8250_port *)port;
 
+#ifdef CONFIG_AR7
+	wait_for_xmitr(up, BOTH_EMPTY);
+#else
 	wait_for_xmitr(up, UART_LSR_THRE);
+#endif
 	serial_out(up, UART_TX, ch);
 }
 

index e811a61..ba5734a 100644
@@ -135,6 +135,9 @@ struct rs_multiport_struct {
  * the interrupt line _up_ instead of down, so if we register the IRQ
  * while the UART is in that state, we die in an IRQ storm. */
 #define ALPHA_KLUDGE_MCR (UART_MCR_OUT2)
+#elif defined(CONFIG_AR7)
+/* This is how it is set up by bootloader... */
+#define ALPHA_KLUDGE_MCR (UART_MCR_OUT2|UART_MCR_OUT1|UART_MCR_RTS|UART_MCR_DTR)
 #else
 #define ALPHA_KLUDGE_MCR 0
 #endif

index 09d17b0..8ad2c3b 100644
@@ -40,6 +40,7 @@
 #define PORT_NS16550A	14
 #define PORT_XSCALE	15
 #define PORT_RM9000	16	/* PMC-Sierra RM9xxx internal UART */
+#define PORT_AR7	16
 #define PORT_MAX_8250	16	/* max port ID */
 
 /*

Driver for the cpmac 100M ethernet driver.
It works fine disabling napi support, enabling it gives a kernel panic when the first IPv6 packet has to be forwarded.
Other than that works fine.

index d9b7d9c..6f38a84 100644
@@ -1822,6 +1822,15 @@ config SC92031
 	  To compile this driver as a module, choose M here: the module
 	  will be called sc92031.  This is recommended.
 
+config CPMAC
+	tristate "TI AR7 CPMAC Ethernet support (EXPERIMENTAL)"
+	depends on NET_ETHERNET && EXPERIMENTAL && AR7
+	select PHYLIB
+	select FIXED_PHY
+	select FIXED_MII_100_FDX
+	help
+	  TI AR7 CPMAC Ethernet support
+
 config NET_POCKET
 	bool "Pocket and portable adapters"
 	depends on PARPORT

index 535d2a0..bb22df9 100644
@@ -156,6 +156,7 @@ obj-$(CONFIG_8139CP) += 8139cp.o
 obj-$(CONFIG_8139TOO) += 8139too.o
 obj-$(CONFIG_ZNET) += znet.o
 obj-$(CONFIG_LAN_SAA9730) += saa9730.o
+obj-$(CONFIG_CPMAC) += cpmac.o
 obj-$(CONFIG_DEPCA) += depca.o
 obj-$(CONFIG_EWRK3) += ewrk3.o
 obj-$(CONFIG_ATP) += atp.o

I'm not too sure why I got cc'ed on this (and not on patches 1-6?) but whatever.

This patch introduces quite a number of basic coding-style mistakes. Please run it through scripts/checkpatch.pl and review the output.

The patch introduces vast number of volatile structure fields. Please see Documentation/volatile-considered-harmful.txt.

The patch inroduces a modest number of unneeded (and undesirable) casts of void*, such as

+ struct cpmac_mdio_regs *regs = (struct cpmac_mdio_regs *)bus->priv;

please check for those and fix them up.

The driver implements a driver-private skb pool. I don't know if this is something which we like net drivers doing? If it is approved then surely there should be a common implementation for it somewhere?

The driver does a lot of open-coded dma_cache_inv() calls (in a way which assumes a 32-bit bus, too). I assume that dma_cache_inv() is some mips thing. I'd have thought that it would be better to use the dma mapping API thoughout the driver, and its associated dma invalidation APIs.

The driver has some LINUX_VERSION_CODE ifdefs. We usually prefer that such code not be present in a merged-up driver.

Depends on the ethernet controller, but the ones that I know about just use a CRC (crc-16 IIRC) calculation for the multicast hash.

---
~Randy
*** Remember to use Documentation/SubmitChecklist when testing your code ***

Il Friday 07 September 2007 00:30:25 Andrew Morton ha scritto:

I mailed every maintainer in the respective section in the file MAINTAINERS and you were in the "NETWORK DEVICE DRIVERS" section

Already done. I'm collecting other suggestions before committing

Removing them and the kernel hangs at module load

Done

Are you referring at cpmac_poll?

I will remove in the final release, now I need for testing: my running kernel is older than current git

Can you tell me the function so i'll implement it?

fixed

Hehe, so screwed that you won't care about your ethernet ;)

What? zeroing the memory or other stuff?

What about this?

Thanks for Your attention,
Matteo Croce

They can't just be removed. Please see the document. There are I/O APIs which, if properly used, make volatile unneeded.

cool, I'll wait for the resend before reviewing, then.

As an author I understand that fixing up coding style / cosmetic stuff rather than "meat" is annoying.

But it is important to emphasize that a "clean" driver is what makes a good, thorough, effective review possible.

Jeff

No, even i386 has it ;-)

However, Ralf just posted a patch to remove it on all architectures, and driver writers should consider it gone.

Gr{oetje,eeting}s,

Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]

In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds