Skip to contentSkip to conversation

cxgb3 - log adapter serial number

PATCH RESEND In review Divy Le Ray 1 participant 1 message Aug 22, 2007

Subsystems (2)
Networking Network drivers
lore
Share & tools
lore

Divy Le Ray

author
#0 lore raw

PATCH RESEND 7/11 cxgb3 - log adapter serial number

From: Divy Le Ray <[email protected]>

Log HW serial number when cxgb3 module is loaded.

Signed-off-by Divy Le Ray <[email protected]>

---

 drivers/net/cxgb3/common.h     |    2 ++
 drivers/net/cxgb3/cxgb3_main.c |    6 ++++--
 drivers/net/cxgb3/t3_hw.c      |    3 ++-
 3 files changed, 8 insertions(+), 3 deletions(-)
drivers/net/cxgb3/common.h +2 -0
index 55922ed..d54446f 100644
@@ -97,6 +97,7 @@ enum {
 	MAX_NPORTS = 2,		/* max # of ports */
 	MAX_FRAME_SIZE = 10240,	/* max MAC frame size, including header + FCS */
 	EEPROMSIZE = 8192,	/* Serial EEPROM size */
+	SERNUM_LEN     = 16,    /* Serial # length */
 	RSS_TABLE_SIZE = 64,	/* size of RSS lookup and mapping tables */
 	TCB_SIZE = 128,		/* TCB size */
 	NMTUS = 16,		/* size of MTU table */

@@ -391,6 +392,7 @@ struct vpd_params {
 	unsigned int uclk;
 	unsigned int mdc;
 	unsigned int mem_timing;
+	u8 sn[SERNUM_LEN + 1];
 	u8 eth_base[6];
 	u8 port_type[MAX_NPORTS];
 	unsigned short xauicfg[2];
drivers/net/cxgb3/cxgb3_main.c +4 -2
index a1f94cf..e5744e7 100644
@@ -2333,10 +2333,12 @@ static void __devinit print_port_info(struct adapter *adap,
 		       (adap->flags & USING_MSIX) ? " MSI-X" :
 		       (adap->flags & USING_MSI) ? " MSI" : "");
 		if (adap->name == dev->name && adap->params.vpd.mclk)
-			printk(KERN_INFO "%s: %uMB CM, %uMB PMTX, %uMB PMRX\n",
+			printk(KERN_INFO
+			       "%s: %uMB CM, %uMB PMTX, %uMB PMRX, S/N: %s\n",
 			       adap->name, t3_mc7_size(&adap->cm) >> 20,
 			       t3_mc7_size(&adap->pmtx) >> 20,
-			       t3_mc7_size(&adap->pmrx) >> 20);
+			       t3_mc7_size(&adap->pmrx) >> 20,
+			       adap->params.vpd.sn);
 	}
 }
drivers/net/cxgb3/t3_hw.c +2 -1
index dd3149d..23b1a16 100644
@@ -505,7 +505,7 @@ struct t3_vpd {
 	u8 vpdr_len[2];
 	VPD_ENTRY(pn, 16);	/* part number */
 	VPD_ENTRY(ec, 16);	/* EC level */
-	VPD_ENTRY(sn, 16);	/* serial number */
+	VPD_ENTRY(sn, SERNUM_LEN); /* serial number */
 	VPD_ENTRY(na, 12);	/* MAC address base */
 	VPD_ENTRY(cclk, 6);	/* core clock */
 	VPD_ENTRY(mclk, 6);	/* mem clock */

@@ -648,6 +648,7 @@ static int get_vpd_params(struct adapter *adapter, struct vpd_params *p)
 	p->uclk = simple_strtoul(vpd.uclk_data, NULL, 10);
 	p->mdc = simple_strtoul(vpd.mdc_data, NULL, 10);
 	p->mem_timing = simple_strtoul(vpd.mt_data, NULL, 10);
+	memcpy(p->sn, vpd.sn_data, SERNUM_LEN);
 
 	/* Old eeproms didn't have port information */
 	if (adapter->params.rev == 0 && !vpd.port0_data[0]) {