Skip to contentSkip to conversation

2.6.23-rc3-mm1: cannot stat `vdso.so.dbg'

DISCUSSION Alexey Dobriyan 4 participants 8 messages Aug 22, 2007 – Aug 23, 2007

lore
Share & tools
lore
#0 lore raw
	# make V=1 modules_install install
	make -f scripts/Makefile.build obj=arch/x86_64/vdso install
	  cp vdso.so.dbg /lib/modules/2.6.23-rc3-mm1/vdso/vdso.so
	cp: cannot stat `vdso.so.dbg': No such file or directory
	make[1]: *** [vdso.so] Error 1
	make: *** [install] Error 2

However, it's in place looks like:

	# ls -l arch/x86_64/vdso/vdso*      
	-rw-r--r-- 1 ad ad  291 Aug 22 13:46 arch/x86_64/vdso/vdso-note.S
	-rw-r--r-- 1 ad ad  830 Aug 22 13:53 arch/x86_64/vdso/vdso-note.o
	-rw-r--r-- 1 ad ad   45 Aug 22 13:46 arch/x86_64/vdso/vdso-start.S
	-rw-r--r-- 1 ad ad  753 Aug 22 13:53 arch/x86_64/vdso/vdso-start.o
	-rw-r--r-- 1 ad ad 3257 Aug 22 13:53 arch/x86_64/vdso/vdso-syms.o
	-rw-r--r-- 1 ad ad   58 Aug 22 13:46 arch/x86_64/vdso/vdso.S
	-rw-r--r-- 1 ad ad 2150 Aug 22 13:53 arch/x86_64/vdso/vdso.lds
	-rw-r--r-- 1 ad ad 2163 Aug 22 13:46 arch/x86_64/vdso/vdso.lds.S
	-rw-r--r-- 1 ad ad 4905 Aug 22 13:53 arch/x86_64/vdso/vdso.o
	-rw-r--r-- 1 ad ad 4104 Aug 22 13:53 arch/x86_64/vdso/vdso.so
===>	-rwxr-xr-x 1 ad ad 5482 Aug 22 13:53 arch/x86_64/vdso/vdso.so.dbg
#1 lore raw

That is fixed by the later version of the vdso-install patches I sent later. I thought Andrew had already incorporated the fixed versions.

Thanks,
Roland

#2 lore raw
Quoted 3 lines · On Wed, 22 Aug 2007 03:24:34 -0700 (PDT) Roland McGrath <[email protected]>…

That is fixed by the later version of the vdso-install patches I sent later. I thought Andrew had already incorporated the fixed versions.

Those patches are in Andi's tree. His tree has the old versions. The patches are inter-tangled so it is non-trivial for me to generate incremental patches on top of Andi's tree which bring his old patches up to date with the new ones. I could of course do so, but it'd be better if Andi's tree weren't carrying old versions of x86_64-ia32-vdso-install-unstripped-copies-on-disk and x86_64-vdso-install-unstripped-copies-on-disk

Please resend those patches to Andi.

#3 lore raw
Quoted 9 lines

Those patches are in Andi's tree. His tree has the old versions. The patches are inter-tangled so it is non-trivial for me to generate incremental patches on top of Andi's tree which bring his old patches up to date with the new ones. I could of course do so, but it'd be better if Andi's tree weren't carrying old versions of x86_64-ia32-vdso-install-unstripped-copies-on-disk and x86_64-vdso-install-unstripped-copies-on-disk

Please resend those patches to Andi.

These haven't changed since I sent them (including to Andi) on August 12.

Thanks,
Roland

While integrating these with the Fedora kernel build, I worked out a few kinks. This patch replaces x86_64-ia32-vdso-install-unstripped-copies-on-disk.patch

Thanks,
Roland

---

This keeps an unstripped copy of the vDSO images built before they are stripped and embedded in the kernel. The unstripped copies get installed in $(MODLIB)/vdso/ by "make install" (or you can explicitly use the subtarget "make vdso_install"). These files can be useful when they contain source-level debugging information.

Cc Sam Ravnborg <[email protected]>
Cc Andi Kleen <[email protected]>

---

 arch/x86_64/Makefile      |    3 +++
 arch/x86_64/ia32/Makefile |   25 +++++++++++++++++++++----
 2 files changed, 24 insertions(+), 4 deletions(-)
arch/x86_64/Makefile renamed from arch/x86_64/Makefile~x86_64-ia32-vdso-install-unstripped-copies-on-disk +6 -1
diff -puN arch/x86_64/Makefile~x86_64-ia32-vdso-install-unstripped-copies-on-disk arch/x86_64/Makefile
@@ -105,9 +105,14 @@ bzdisk: vmlinux
 fdimage fdimage144 fdimage288 isoimage: vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(BOOTIMAGE) $@
 
-install:
+install: vdso_install
 	$(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(BOOTIMAGE) $@ 
 
+vdso_install:
+ifeq ($(CONFIG_IA32_EMULATION),y)
+	$(Q)$(MAKE) $(build)=arch/x86_64/ia32 $@
+endif
+
 archclean:
 	$(Q)$(MAKE) $(clean)=$(boot)
 
arch/x86_64/ia32/Makefile renamed from arch/x86_64/ia32/Makefile~x86_64-ia32-vdso-install-unstripped-copies-on-disk +21 -4
diff -puN arch/x86_64/ia32/Makefile~x86_64-ia32-vdso-install-unstripped-copies-on-disk arch/x86_64/ia32/Makefile
@@ -18,18 +18,35 @@ $(obj)/syscall32_syscall.o: \
 	$(foreach F,sysenter syscall,$(obj)/vsyscall-$F.so)
 
 # Teach kbuild about targets
-targets := $(foreach F,sysenter syscall,vsyscall-$F.o vsyscall-$F.so)
+targets := $(foreach F,$(addprefix vsyscall-,sysenter syscall),\
+		     $F.o $F.so $F.so.dbg)
 
 # The DSO images are built using a special linker script
 quiet_cmd_syscall = SYSCALL $@
-      cmd_syscall = $(CC) -m32 -nostdlib -shared -s \
+      cmd_syscall = $(CC) -m32 -nostdlib -shared \
 			  $(call ld-option, -Wl$(comma)--hash-style=sysv) \
 			   -Wl,-soname=linux-gate.so.1 -o $@ \
 			   -Wl,-T,$(filter-out FORCE,$^)
 
-$(obj)/vsyscall-sysenter.so $(obj)/vsyscall-syscall.so: \
-$(obj)/vsyscall-%.so: $(src)/vsyscall.lds $(obj)/vsyscall-%.o FORCE
+$(obj)/%.so: OBJCOPYFLAGS := -S
+$(obj)/%.so: $(obj)/%.so.dbg FORCE
+	$(call if_changed,objcopy)
+
+$(obj)/vsyscall-sysenter.so.dbg $(obj)/vsyscall-syscall.so.dbg: \
+$(obj)/vsyscall-%.so.dbg: $(src)/vsyscall.lds $(obj)/vsyscall-%.o FORCE
 	$(call if_changed,syscall)
 
 AFLAGS_vsyscall-sysenter.o = -m32 -Wa,-32
 AFLAGS_vsyscall-syscall.o = -m32 -Wa,-32
+
+vdsos := vdso32-sysenter.so vdso32-syscall.so
+
+quiet_cmd_vdso_install = INSTALL $@
+      cmd_vdso_install = cp $(@:vdso32-%.so=$(obj)/vsyscall-%.so.dbg) \
+			    $(MODLIB)/vdso/$@
+
+$(vdsos):
+	@mkdir -p $(MODLIB)/vdso
+	$(call cmd,vdso_install)
+
+vdso_install: $(vdsos)

While integrating these with the Fedora kernel build, I worked out a few kinks. This patch replaces x86_64-vdso-install-unstripped-copies-on-disk.patch and expects x86_64-ia32-vdso-install-unstripped-copies-on-disk.patch was applied first.

Thanks,
Roland

---

This keeps an unstripped copy of the vDSO images built before they are stripped and embedded in the kernel. The unstripped copies get installed in $(MODLIB)/vdso/ by "make install" (or you can explicitly use the subtarget "make vdso_install"). These files can be useful when they contain source-level debugging information.

---
 arch/x86_64/Makefile      |    1 +
 arch/x86_64/vdso/Makefile |   20 ++++++++++++++++----
 2 files changed, 17 insertions(+), 4 deletions(-)
arch/x86_64/Makefile +1 -0
index 93fc1f2..c0905ae 100644
@@ -112,6 +112,7 @@ vdso_install:
 ifeq ($(CONFIG_IA32_EMULATION),y)
 	$(Q)$(MAKE) $(build)=arch/x86_64/ia32 $@
 endif
+	$(Q)$(MAKE) $(build)=arch/x86_64/vdso $@
 
 archclean:
 	$(Q)$(MAKE) $(clean)=$(boot)
arch/x86_64/vdso/Makefile +16 -4
index faaa72f..20ecf05 100644
@@ -13,7 +13,7 @@ vobjs := $(foreach F,$(vobjs-y),$(obj)/$F)
 
 $(obj)/vdso.o: $(obj)/vdso.so
 
-targets += vdso.so vdso.lds $(vobjs-y) vdso-syms.o
+targets += vdso.so vdso.so.dbg vdso.lds $(vobjs-y) vdso-syms.o
 
 # The DSO images are built using a special linker script.
 quiet_cmd_syscall = SYSCALL $@
@@ -25,14 +25,18 @@ export CPPFLAGS_vdso.lds += -P -C -U$(ARCH)
 vdso-flags = -fPIC -shared -Wl,-soname=linux-vdso.so.1 \
 		 $(call ld-option, -Wl$(comma)--hash-style=sysv) \
 		-Wl,-z,max-page-size=4096 -Wl,-z,common-page-size=4096
-SYSCFLAGS_vdso.so = $(vdso-flags)
+SYSCFLAGS_vdso.so.dbg = $(vdso-flags)
 
 $(obj)/vdso.o: $(src)/vdso.S $(obj)/vdso.so
 
-$(obj)/vdso.so: $(src)/vdso.lds $(vobjs) FORCE
+$(obj)/vdso.so.dbg: $(src)/vdso.lds $(vobjs) FORCE
 	$(call if_changed,syscall)
 
-CFL := $(PROFILING) -mcmodel=small -fPIC -g0 -O2 -fasynchronous-unwind-tables -m64
+$(obj)/%.so: OBJCOPYFLAGS := -S
+$(obj)/%.so: $(obj)/%.so.dbg FORCE
+	$(call if_changed,objcopy)
+
+CFL := $(PROFILING) -mcmodel=small -fPIC $(if $(CONFIG_DEBUG_INFO),-g,-g0) -O2 -fasynchronous-unwind-tables -m64
 
 $(obj)/vclock_gettime.o: CFLAGS = $(CFL)
 $(obj)/vgetcpu.o: CFLAGS = $(CFL)
@@ -47,3 +51,11 @@ $(obj)/built-in.o: ld_flags += -R $(obj)/vdso-syms.o
 SYSCFLAGS_vdso-syms.o = -r -d
 $(obj)/vdso-syms.o: $(src)/vdso.lds $(vobjs) FORCE
 	$(call if_changed,syscall)
+
+quiet_cmd_vdso_install = INSTALL $@
+      cmd_vdso_install = cp $(obj)/[email protected] $(MODLIB)/vdso/$@
+vdso.so:
+	@mkdir -p $(MODLIB)/vdso
+	$(call cmd,vdso_install)
+
+vdso_install: vdso.so
#4 lore raw
Quoted 11 lines · On Wednesday 22 August 2007 23:56:38 Roland McGrath wrote:
Quoted 9 lines

Those patches are in Andi's tree. His tree has the old versions. The patches are inter-tangled so it is non-trivial for me to generate incremental patches on top of Andi's tree which bring his old patches up to date with the new ones. I could of course do so, but it'd be better if Andi's tree weren't carrying old versions of x86_64-ia32-vdso-install-unstripped-copies-on-disk and x86_64-vdso-install-unstripped-copies-on-disk

Please resend those patches to Andi.

These haven't changed since I sent them (including to Andi) on August 12.

How come they have identical subjects and identical description? How is anybody supposed to make sense of this?

-Andi

#5 lore raw
Quoted 2 lines

How come they have identical subjects and identical description? How is anybody supposed to make sense of this?

Sorry, I asked Andrew and he said to send replacement patches. I thought I was following instructions.

Thanks,
Roland

#6 lore raw
Quoted 5 lines · On Thursday 23 August 2007 01:16:32 Roland McGrath wrote:
Quoted 2 lines

How come they have identical subjects and identical description? How is anybody supposed to make sense of this?

Sorry, I asked Andrew and he said to send replacement patches. I thought I was following instructions.

The problem is they're two patching consecutively patching the same file with 100% identical subject/description.

So either: they should be merged together into one patch or the second (or first) needs a new description/subject

I right now got the second as

vdso-do-something-more-with-unstripped-copies-on-disk:

Do something with vdsos and debug information

From: Roland McGrath <[email protected]>

TBD this needs a proper changelog/subject from Roland. I have no idea what it does

But clearly that's not an satisfactionary state. Which of the options do you prefer?

-Andi

#7 lore raw
Quoted 5 lines

The problem is they're two patching consecutively patching the same file with 100% identical subject/description.

So either: they should be merged together into one patch or the second (or first) needs a new description/subject

They do the same thing for the x86_64 ia32-compat and x86_64 native vDSOs, respectively.

Subject: [PATCH 1/2] x86_64 ia32 vDSO: install unstripped copies on disk
Subject: [PATCH 2/2] x86_64 vDSO: install unstripped copies on disk

Andrew called them

x86_64-ia32-vdso-install-unstripped-copies-on-disk x86_64-vdso-install-unstripped-copies-on-disk

The names/subjects are not identical, but differ in having "ia32" or not. That is really the only difference between the two patches, too.

Quoted 2 lines

TBD this needs a proper changelog/subject from Roland. I have no idea what it does

I don't now what is unclear about the log entry. Yes, each log entry says the same thing after the first (Subject) line. Each one relates to a different arch/x86_64/subdirectory/Makefile that creates vDSO images. Prepend "This applies to the x86_64/vdso native vDSO building." or "This applies to the x86_64/ia32 vDSO building." to the log if you prefer.

Thanks,
Roland