Skip to contentSkip to conversation

PCI: Unable to reserve mem region problem

DISCUSSION Karl Bellve 3 participants 4 messages Sep 5, 2007 – Sep 7, 2007

lore
Share & tools
lore
#0 lore raw

Please CC any response. Thanks.

I am having an issue with a Supermicro h8dce motherboard and failure to recognize a 5th SATA drive after upgrading to Fedora 7.

This motherboard has 8 sata ports that use the sata_nv driver.

The lack of seeing the 5th SATA drive shows up in 2.6.22 kernels, such as kernel-2.6.22.2-42.fc6 and kernel-2.6.22.1-41.fc7.

The 5th SATA drive can still be detected in 2.6.20 kernels such as kernel-2.6.20-1.2933.fc6 (I am currently using this kernel).

From dmesg, it appears the reason I am not seeing the 5th SATA drive (second SATA controller) is the following error:

Aug 30 14:08:03 alcor kernel: sata_nv 0000:80:08.0: Using ADMA mode
Aug 30 14:08:03 alcor kernel: PCI: *Unable to reserve mem region* #6:1000@dfefd000 for device 0000:80:08.0
Aug 30 14:08:03 alcor kernel: ACPI: PCI interrupt for device 0000:80:08.0 disabled
Aug 30 14:08:03 alcor kernel: sata_nv: probe of 0000:80:08.0 failed with error -16

sata_nv that comes with the 2.6.22 kernels appear to be version 3.4 while the older kernels comes with version 3.2 (which work). I contacted Robert Hancock directly about this and he suggested I post an email to LKML.

Motherboard: http://www.supermicro.com/Aplus/motherboard/Opteron/nForce/H8DCE.cfm
Single AMD Opteron(tm) Processor 244
1 GB of memory.

I can send you the complete dmesg output if you would like.

Thanks!

begin:vcard
fn:Karl Bellve
n:Bellve;Karl
org:Biomedical Imaging Group;Department of Physiology
adr:2 Biotech, Suite 114;;373 Plantation Street;Worcester;Massachusetts;01655;United States of America email;internet:[email protected]
title:Assistant Professor
tel;work:508-856-6514
tel;fax:508-856-6514
x-mozilla-html:TRUE
version:2.1
end:vcard

#1 lore raw
Quoted 30 lines · Karl Bellve

Please CC any response. Thanks.

I am having an issue with a Supermicro h8dce motherboard and failure to recognize a 5th SATA drive after upgrading to Fedora 7.

This motherboard has 8 sata ports that use the sata_nv driver.

The lack of seeing the 5th SATA drive shows up in 2.6.22 kernels, such as kernel-2.6.22.2-42.fc6 and kernel-2.6.22.1-41.fc7.

The 5th SATA drive can still be detected in 2.6.20 kernels such as kernel-2.6.20-1.2933.fc6 (I am currently using this kernel).

From dmesg, it appears the reason I am not seeing the 5th SATA drive (second SATA controller) is the following error:

Aug 30 14:08:03 alcor kernel: sata_nv 0000:80:08.0: Using ADMA mode
Aug 30 14:08:03 alcor kernel: PCI: *Unable to reserve mem region*
#6:1000@dfefd000 for device 0000:80:08.0
Aug 30 14:08:03 alcor kernel: ACPI: PCI interrupt for device
0000:80:08.0 disabled
Aug 30 14:08:03 alcor kernel: sata_nv: probe of 0000:80:08.0 failed with

error -16

sata_nv that comes with the 2.6.22 kernels appear to be version 3.4 while the older kernels comes with version 3.2 (which work). I contacted Robert Hancock directly about this and he suggested I post an email to LKML.

Quoted 7 lines

Motherboard:
http://www.supermicro.com/Aplus/motherboard/Opteron/nForce/H8DCE.cfm
Single AMD Opteron(tm) Processor 244
1 GB of memory.

I can send you the complete dmesg output if you would like.

Open a bugzilla at https://bugzilla.redhat.com and post full dmesg from the new and old kernels as attachments there.

There seems to be some kind of memory layout problem in 2.6.22...

#2 lore raw
In reply to Karl Bellve
Quoted 5 lines · On Wed, 05 Sep 2007 10:32:38 -0400 "Karl Bellve" <[email protected]>…

Please CC any response. Thanks.

I am having an issue with a Supermicro h8dce motherboard and failure to recognize a 5th SATA drive after upgrading to Fedora 7.

Can you send me an lspci -vvxxx so that I can look into this. Might be a few days with the kernel summit but it should give a clue and may be linked to ADMA mode

#3 lore raw
Quoted 11 lines · Alan Cox
Quoted 4 lines · On Wed, 05 Sep 2007 10:32:38 -0400 "Karl Bellve" <[email protected]>…

Please CC any response. Thanks.

I am having an issue with a Supermicro h8dce motherboard and failure to recognize a 5th SATA drive after upgrading to Fedora 7.

Can you send me an lspci -vvxxx so that I can look into this. Might be a few days with the kernel summit but it should give a clue and may be linked to ADMA mode

It's in RH bugzilla:

https://bugzilla.redhat.com/show_bug.cgi?id=280641