ixgbe: driver for Intel(R) 82598 PCI-Express 10GbE adapters (v4)

index 9c54a5e..49bea72 100644
@@ -2022,16 +2022,14 @@ W:	http://sourceforge.net/projects/e1000/
 S:	Supported
 
 INTEL PRO/10GbE SUPPORT
-P:	Jeff Kirsher
-M:	[email protected]
 P:	Ayyappan Veeraiyan
 M:	[email protected]
-P:	John Ronciak
-M:	[email protected]
-P:	Jesse Brandeburg
-M:	[email protected]
 P:	Auke Kok
 M:	[email protected]
+P:	Jesse Brandeburg
+M:	[email protected]
+P:	John Ronciak
+M:	[email protected]
 L:	[email protected]
 W:	http://sourceforge.net/projects/e1000/
 S:	Supported

index 5b9e17b..39a91e0 100644
@@ -2420,12 +2420,35 @@ config EHEA
 	  To compile the driver as a module, choose M here. The module
 	  will be called ehea.
 
+config IXGBE
+	tristate "Intel(R) 10GbE PCI Express adapters support"
+	depends on PCI
+	---help---
+	  This driver supports Intel(R) 10GbE PCI Express family of
+	  adapters.  For more information on how to identify your adapter, go
+	  to the Adapter & Driver ID Guide at:
+
+	  <http://support.intel.com/support/network/adapter/pro100/21397.htm>
+
+	  For general information and support, go to the Intel support
+	  website at:
+
+	  <http://support.intel.com>
+
+	  More specific information on configuring the driver is in
+	  <file:Documentation/networking/ixgbe.txt>.
+
+	  To compile this driver as a module, choose M here and read
+	  <file:Documentation/networking/net-modules.txt>.  The module
+	  will be called ixgbe.
+
 config IXGB
 	tristate "Intel(R) PRO/10GbE support"
 	depends on PCI
 	---help---
-	  This driver supports Intel(R) PRO/10GbE family of
-	  adapters.  For more information on how to identify your adapter, go
+	  This driver supports Intel(R) PRO/10GbE family of adapters for
+	  PCI-X type cards. For PCI-E type cards, use the "ixgbe" driver
+	  instead. For more information on how to identify your adapter, go
 	  to the Adapter & Driver ID Guide at:
 
 	  <http://support.intel.com/support/network/adapter/pro100/21397.htm>

index e684212..7529c8f 100644
@@ -4,6 +4,7 @@
 
 obj-$(CONFIG_E1000) += e1000/
 obj-$(CONFIG_IBM_EMAC) += ibm_emac/
+obj-$(CONFIG_IXGBE) += ixgbe/
 obj-$(CONFIG_IXGB) += ixgb/
 obj-$(CONFIG_CHELSIO_T1) += chelsio/
 obj-$(CONFIG_CHELSIO_T3) += cxgb3/

new file mode 100644
index 0000000..ccd83d9
@@ -0,0 +1,36 @@
+################################################################################
+#
+# Intel 10 Gigabit PCI Express Linux driver
+# Copyright(c) 1999 - 2007 Intel Corporation.
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms and conditions of the GNU General Public License,
+# version 2, as published by the Free Software Foundation.
+#
+# This program is distributed in the hope it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+# more details.
+#
+# You should have received a copy of the GNU General Public License along with
+# this program; if not, write to the Free Software Foundation, Inc.,
+# 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+#
+# The full GNU General Public License is included in this distribution in
+# the file called "COPYING".
+#
+# Contact Information:
+# Linux NICS <[email protected]>
+# e1000-devel Mailing List <[email protected]>
+# Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+#
+################################################################################
+
+#
+# Makefile for the Intel(R) 10GbE PCI Express ethernet driver
+#
+
+obj-$(CONFIG_IXGBE) += ixgbe.o
+
+ixgbe-objs := ixgbe_main.o ixgbe_common.o ixgbe_ethtool.o \
+              ixgbe_82598.o ixgbe_phy.o