Kernel Panic on 2.6.23-rc5
Hi!
I'm not really sure if this is a regression or if I simply hit a hardware problem.
After some time of work (mostly hours sometimes minutes) my system will freeze including Blinking LED's and unresponsiveness on SysRQ, but I finally got this using netconsole:
CPU 0: Machine Check Exception: 0000000000000004
Bank 4: b200000000070f0f
Kernel panic - not syncing: CPU context corrupt
I Also keep getting ext3 errors about reading or writing in wrong zones. Will now have a - this means many - run of memtest.
Signature · 2 lines
Greetings Daniel Exner
Hi Daniel,
Quoted 11 lines · Daniel Exner
Hi!
I'm not really sure if this is a regression or if I simply hit a hardware problem.
After some time of work (mostly hours sometimes minutes) my system will freeze including Blinking LED's and unresponsiveness on SysRQ, but I finally got this using netconsole:CPU 0: Machine Check Exception: 0000000000000004
Bank 4:b200000000070f0fKernel panic - not syncing: CPU context corrupt
It is a hardware problem.
You may want to use mcelog ftp://ftp.x86-64.org/pub/linux/tools/mcelog/
Quoted 7 lines
I Also keep getting ext3 errors about reading or writing in wrong zones. Will now have a - this means many - run of memtest.
--
Greetings
Daniel Exner
Regards,
Michal
Signature · 2 lines
LOG http://www.stardust.webpages.pl/log/
06 September 2007 Michal Piotrowski wrote:
[..]
Quoted 7 lines
Quoted 3 lines
CPU 0: Machine Check Exception: 0000000000000004
Bank 4:b200000000070f0fKernel panic - not syncing: CPU context corruptIt is a hardware problem.
You may want to use mcelog ftp://ftp.x86-64.org/pub/linux/tools/mcelog/
Tried this on grml64 (cause I'm normaly on x86)
Results:
--
WARNING: with --dmi mcelog --ascii must run on the same machine with the
same BIOS/memory configuration as where the machine check occurred.
HARDWARE ERROR. This is *NOT* a software problem!
Please contact your hardware vendor
CPU 0 0 data cache STATUS 0 MCGSTATUS 4
Bank 4: b200000000070f0f
Kernel panic - not syncing: CPU context corrupt
---
This really doesnt say me anything the above didn't. Next thing I tried was:
parsemce-e 0 -b 4 -s b200000000070f0f -a 0
Output:
Status: (0) Restart IP invalid.
parsebank(4): b200000000070f0f @ 0
External tag parity error
CPU state corrupt. Restart not possible
Error enabled in control register
Error not corrected.
Bus and interconnect error
Participation: Generic
Timeout:
Request: Generic error
Transaction type : Invalid
Memory/IO : Other
Wich doesnt tell me anything either :(
Google suggest anything from broken CPU(bad), broken RAM(even more bad) to broken mainboard(Ouch..)
I'm going to let memtest run overnight. This is the easiest test I guess :)
Signature · 5 lines
Greetings Daniel Exner -- Mit freundlichen Grüßen Daniel Exner
Re: Kernel Panic on 2.6.23-rc5 (solved)
In reply to Michal PiotrowskiHi!
Michal Piotrowski:
Quoted 11 lines · Daniel Exner
Quoted 9 lines
I'm not really sure if this is a regression or if I simply hit a hardware problem.
After some time of work (mostly hours sometimes minutes) my system will freeze including Blinking LED's and unresponsiveness on SysRQ, but I finally got this using netconsole:CPU 0: Machine Check Exception: 0000000000000004
Bank 4:b200000000070f0fKernel panic - not syncing: CPU context corruptIt is a hardware problem.
You where right. I switched the power suply (first guess of hardware guy ;) The Box is now up 2 days 9hrs and no kp so far :)
I really should use sensord to show undervoltages in syslog..
Quoted 1 line
You may want to use mcelog ftp://ftp.x86-64.org/pub/linux/tools/mcelog/
This is a nice tool, but why is it only available for x86_64 ? The MCE reporting facility is in place in x86, too.
Anyway I only send this mail to say: Not Kernel's fault.
Signature · 2 lines
Greetings Daniel Exner