UML dead with current -git?
Hello everybody,
I'm trying to build a UML machine on x86-64 (config attached) but I'm getting compile errors.
What am I doing wrong?
make allnoconfig ARCH=um
make menuconfig ARCH=um
selected a few options
make -j 5 ARCH=um
..
include/linux/jiffies.h:225:31: error: division by zero in #if include/linux/jiffies.h:225:46: warning: "SHIFT_HZ" is not defined
In file included from arch/um/include/sysdep/kernel-offsets.h:2,
from arch/um/kernel/asm-offsets.c:1:
include/linux/sched.h: In function 'dequeue_signal_lock':
include/linux/sched.h:1506: error: implicit declaration of function 'local_irq_save' include/linux/sched.h:1508: error: implicit declaration of function 'local_irq_restore' In file included from include/linux/crypto.h:21,
from arch/um/include/sysdep/kernel-offsets.h:5,
from arch/um/kernel/asm-offsets.c:1:
include/linux/module.h: At top level:
include/linux/module.h:222: error: requested alignment is not a constant
In file included from arch/um/kernel/asm-offsets.c:1:
arch/um/include/sysdep/kernel-offsets.h:25:29: error: asm/arch/unistd.h: No such file or directory In file included from arch/um/include/sysdep/kernel-offsets.h:30,
from arch/um/kernel/asm-offsets.c:1:
arch/um/include/common-offsets.h: In function 'foo':
arch/um/include/common-offsets.h:8: error: 'struct thread_struct' has no member named 'regs' make[1]: *** [arch/um/kernel/asm-offsets.s] Error 1
make: *** [prepare0] Error 2
Thank you for all help.
Regards,
Phil
Signature · 2 lines
Versioning your /etc, /home or even your whole installation?
Try fsvs (fsvs.tigris.org)! SYMLINK arch/um/include/kern_constants.h
make[1]: `arch/um/sys-x86_64/user-offsets.s' is up to date.
CHK arch/um/include/user_constants.h CHK include/linux/version.h CHK include/linux/utsrelease.h CC arch/um/kernel/asm-offsets.s
In file included from include/asm/pda.h:8,
from include/asm/current.h:7,
from include/linux/capability.h:47,
from include/linux/sched.h:49,
from arch/um/include/sysdep/kernel-offsets.h:2,
from arch/um/kernel/asm-offsets.c:1:include/asm/page.h:89:6: warning: "CONFIG_PHYSICAL_START" is not defined
In file included from include/linux/prefetch.h:14,
from include/linux/list.h:8,
from include/linux/preempt.h:11,
from include/linux/spinlock.h:49,
from include/linux/seqlock.h:29,
from include/linux/time.h:8,
from include/linux/timex.h:57,
from include/linux/sched.h:53,
from arch/um/include/sysdep/kernel-offsets.h:2,
from arch/um/kernel/asm-offsets.c:1:include/asm/processor.h:78: error: 'CONFIG_X86_L1_CACHE_SHIFT' undeclared here (not in a function) include/asm/processor.h:78: error: requested alignment is not a constant include/asm/processor.h:198: error: requested alignment is not a constant
In file included from include/linux/sched.h:54,
from arch/um/include/sysdep/kernel-offsets.h:2,
from arch/um/kernel/asm-offsets.c:1:include/linux/jiffies.h:18:5: warning: "CONFIG_HZ" is not defined include/linux/jiffies.h:20:7: warning: "CONFIG_HZ" is not defined include/linux/jiffies.h:22:7: warning: "CONFIG_HZ" is not defined include/linux/jiffies.h:24:7: warning: "CONFIG_HZ" is not defined include/linux/jiffies.h:26:7: warning: "CONFIG_HZ" is not defined include/linux/jiffies.h:28:7: warning: "CONFIG_HZ" is not defined include/linux/jiffies.h:30:7: warning: "CONFIG_HZ" is not defined include/linux/jiffies.h:33:3: error: #error You lose. include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined include/linux/jiffies.h:225:31: error: division by zero in #if include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined include/linux/jiffies.h:225:31: error: division by zero in #if include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined include/linux/jiffies.h:225:31: error: division by zero in #if include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined include/linux/jiffies.h:225:31: error: division by zero in #if include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined include/linux/jiffies.h:225:31: error: division by zero in #if include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined include/linux/jiffies.h:225:31: error: division by zero in #if include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined include/linux/jiffies.h:225:31: error: division by zero in #if include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined include/linux/jiffies.h:225:31: error: division by zero in #if include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined include/linux/jiffies.h:225:31: error: division by zero in #if include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined include/linux/jiffies.h:225:31: error: division by zero in #if include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined include/linux/jiffies.h:225:31: error: division by zero in #if include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined include/linux/jiffies.h:225:31: error: division by zero in #if include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined include/linux/jiffies.h:225:31: error: division by zero in #if include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined include/linux/jiffies.h:225:31: error: division by zero in #if include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined include/linux/jiffies.h:225:31: error: division by zero in #if include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined include/linux/jiffies.h:225:31: warning: "CONFIG_HZ" is not defined include/linux/jiffies.h:225:31: error: division by zero in #if include/linux/jiffies.h:225:46: warning: "SHIFT_HZ" is not defined
In file included from arch/um/include/sysdep/kernel-offsets.h:2,
from arch/um/kernel/asm-offsets.c:1:include/linux/sched.h: In function 'dequeue_signal_lock':include/linux/sched.h:1506: error: implicit declaration of function 'local_irq_save' include/linux/sched.h:1508: error: implicit declaration of function 'local_irq_restore' In file included from include/linux/crypto.h:21,
from arch/um/include/sysdep/kernel-offsets.h:5,
from arch/um/kernel/asm-offsets.c:1:include/linux/module.h: At top level:include/linux/module.h:222: error: requested alignment is not a constant
In file included from arch/um/kernel/asm-offsets.c:1:arch/um/include/sysdep/kernel-offsets.h:25:29: error: asm/arch/unistd.h: No such file or directory In file included from arch/um/include/sysdep/kernel-offsets.h:30,
from arch/um/kernel/asm-offsets.c:1:arch/um/include/common-offsets.h: In function 'foo':arch/um/include/common-offsets.h:8: error: 'struct thread_struct' has no member named 'regs' make[1]: *** [arch/um/kernel/asm-offsets.s] Error 1
make: *** [prepare0] Error 2
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.23-rc6
# Tue Sep 18 17:11:16 2007
#CONFIG_DEFCONFIG_LIST="arch/$ARCH/defconfig"CONFIG_GENERIC_HARDIRQS=yCONFIG_UML=yCONFIG_MMU=yCONFIG_NO_IOMEM=y
# CONFIG_TRACE_IRQFLAGS_SUPPORT is not setCONFIG_LOCKDEP_SUPPORT=y
# CONFIG_STACKTRACE_SUPPORT is not setCONFIG_GENERIC_CALIBRATE_DELAY=yCONFIG_GENERIC_BUG=yCONFIG_IRQ_RELEASE_METHOD=y
#
# UML-specific options
#CONFIG_STATIC_LINK=yCONFIG_MODE_SKAS=yCONFIG_UML_X86=yCONFIG_64BIT=yCONFIG_RWSEM_GENERIC_SPINLOCK=yCONFIG_SEMAPHORE_SLEEPERS=yCONFIG_TOP_ADDR=0x80000000CONFIG_3_LEVEL_PGTABLES=yCONFIG_STUB_CODE=0x7fbfffe000CONFIG_STUB_DATA=0x7fbffff000CONFIG_STUB_START=0x7fbfffe000
# CONFIG_ARCH_HAS_SC_SIGNALS is not set
# CONFIG_ARCH_REUSE_HOST_VSYSCALL_AREA is not setCONFIG_SMP_BROKEN=yCONFIG_GENERIC_HWEIGHT=yCONFIG_SELECT_MEMORY_MODEL=yCONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not setCONFIG_FLATMEM=yCONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not setCONFIG_SPLIT_PTLOCK_CPUS=4CONFIG_RESOURCES_64BIT=yCONFIG_ZONE_DMA_FLAG=0CONFIG_VIRT_TO_BUS=yCONFIG_LD_SCRIPT_STATIC=y
# CONFIG_NET is not setCONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not setCONFIG_HOSTFS=y
# CONFIG_HPPFS is not setCONFIG_MCONSOLE=y
# CONFIG_MAGIC_SYSRQ is not setCONFIG_NEST_LEVEL=0CONFIG_KERNEL_STACK_ORDER=1
# CONFIG_UML_REAL_TIME_CLOCK is not set
#
# General setup
#CONFIG_EXPERIMENTAL=yCONFIG_BROKEN_ON_SMP=yCONFIG_INIT_ENV_ARG_LIMIT=128CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
# CONFIG_SWAP is not set
# CONFIG_SYSVIPC is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_USER_NS is not set
# CONFIG_IKCONFIG is not setCONFIG_LOG_BUF_SHIFT=14
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not setCONFIG_CC_OPTIMIZE_FOR_SIZE=yCONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not setCONFIG_UID16=yCONFIG_SYSCTL_SYSCALL=yCONFIG_KALLSYMS=yCONFIG_KALLSYMS_ALL=yCONFIG_KALLSYMS_EXTRA_PASS=yCONFIG_HOTPLUG=yCONFIG_PRINTK=yCONFIG_BUG=yCONFIG_ELF_CORE=yCONFIG_BASE_FULL=yCONFIG_FUTEX=yCONFIG_ANON_INODES=yCONFIG_EPOLL=yCONFIG_SIGNALFD=yCONFIG_TIMERFD=yCONFIG_EVENTFD=yCONFIG_SHMEM=yCONFIG_VM_EVENT_COUNTERS=yCONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not setCONFIG_SLUB=y
# CONFIG_SLOB is not setCONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not setCONFIG_BASE_SMALL=0CONFIG_MODULES=yCONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not setCONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not setCONFIG_KMOD=yCONFIG_BLOCK=y
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
#
# IO Schedulers
#CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not setCONFIG_DEFAULT_NOOP=yCONFIG_DEFAULT_IOSCHED="noop"
# CONFIG_BLK_DEV is not set
# CONFIG_MMAPPER is not set
#
# Character Devices
#
# CONFIG_STDERR_CONSOLE is not setCONFIG_STDIO_CONSOLE=y
# CONFIG_SSL is not set
# CONFIG_NULL_CHAN is not set
# CONFIG_PORT_CHAN is not set
# CONFIG_PTY_CHAN is not set
# CONFIG_TTY_CHAN is not set
# CONFIG_XTERM_CHAN is not setCONFIG_NOCONFIG_CHAN=yCONFIG_CON_ZERO_CHAN="fd:0,fd:1"CONFIG_CON_CHAN="xterm"CONFIG_SSL_CHAN="pty"
# CONFIG_UNIX98_PTYS is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_WATCHDOG is not set
# CONFIG_UML_SOUND is not set
# CONFIG_SOUND is not set
# CONFIG_HOSTAUDIO is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_UML_RANDOM is not set
#
# Generic Driver Options
#CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
#
# Networking
#
#
# File systems
#
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4DEV_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_INOTIFY is not set
# CONFIG_QUOTA is not setCONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not setCONFIG_PROC_SYSCTL=yCONFIG_SYSFS=y
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not setCONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not setCONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
# CONFIG_NLS is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_CRYPTO is not set
#
# Library routines
#
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
# CONFIG_CRC32 is not set
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not setCONFIG_PLIST=yCONFIG_HAS_DMA=y
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_MD is not set
# CONFIG_INPUT is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_ENABLE_MUST_CHECK is not setCONFIG_UNUSED_SYMBOLS=yCONFIG_DEBUG_FS=yCONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not setCONFIG_DETECT_SOFTLOCKUP=yCONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not setCONFIG_DEBUG_BUGVERBOSE=yCONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not setCONFIG_FRAME_POINTER=yCONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_GPROF is not set
# CONFIG_GCOV is not set
# CONFIG_DEBUG_STACK_USAGE is not set
Quoted 2 lines · Philipp Marek
I'm trying to build a UML machine on x86-64 (config attached) but I'm getting compile errors.
Builds for me. Did you start with an mrproper? These errors look like the UML build getting confused by left-overs from an x86_64 build.
Jeff
Signature · 1 line
Work email - jdike at linux dot intel dot com
Quoted 7 lines · Jeff Dike
Quoted 2 lines · Philipp Marek
I'm trying to build a UML machine on x86-64 (config attached) but I'm getting compile errors.
Builds for me. Did you start with an mrproper? These errors look like the UML build getting confused by left-overs from an
x86_64build.
Sounds to me like a known issue by you. Can you give a few more details so we maybe can get it fixed?
Sam
Quoted 2 lines · Sam Ravnborg
Sounds to me like a known issue by you. Can you give a few more details so we maybe can get it fixed?
I believe what happened here is an x86_64 build followed by a UML/x86_64 build with no intervening mrproper.
I've always considered this to be a "don't do that" sort of thing. However, maybe we could stick the arch of the current build somewhere in the tree, check that before any serious part of a subsequent build, and error out if $ARCH is different.
Jeff
Signature · 1 line
Work email - jdike at linux dot intel dot com
Quoted 5 lines · On Wednesday 19 September 2007 Jeff Dike wrote:
Quoted 2 lines · Sam Ravnborg
Sounds to me like a known issue by you. Can you give a few more details so we maybe can get it fixed?
I believe what happened here is an
x86_64build followed by a UML/x86_64 build with no intervening mrproper.
Yes, after a "make mrproper" it compiles fine.
However, the .config is gone afterwards ...
Quoted 4 lines
I've always considered this to be a "don't do that" sort of thing. However, maybe we could stick the arch of the current build somewhere in the tree, check that before any serious part of a subsequent build, and error out if $ARCH is different.
Well, on this line it may be nice to be able to put the target architecture somewhere ...
make mrproper
make menuconfig ARCH=um
make ARCH=um
... some tweaking
make menuconfig
and the .config is overwritten with the "wrong" architecture. (I know about .config.bak and so on ... just a small wish)
Thank you!
Regards,
Phil
Signature · 2 lines
Versioning your /etc, /home or even your whole installation?
Try fsvs (fsvs.tigris.org)!Quoted 13 lines · On Wed, 19 Sep 2007 14:43:23 +0200 Philipp Marek wrote:
Quoted 5 lines · On Wednesday 19 September 2007 Jeff Dike wrote:
Quoted 2 lines · Sam Ravnborg
Sounds to me like a known issue by you. Can you give a few more details so we maybe can get it fixed?
I believe what happened here is an
x86_64build followed by a UML/x86_64 build with no intervening mrproper.Yes, after a "make mrproper" it compiles fine.
However, the .config is gone afterwards ...Quoted 4 lines
I've always considered this to be a "don't do that" sort of thing. However, maybe we could stick the arch of the current build somewhere in the tree, check that before any serious part of a subsequent build, and error out if $ARCH is different.
Quoted 9 lines
Well, on this line it may be nice to be able to put the target architecture somewhere ...
make mrproper
make menuconfig ARCH=um
make ARCH=um
... some tweaking
make menuconfig
and the .config is overwritten with the "wrong" architecture. (I know about .config.bak and so on ... just a small wish)
Yes, I've tried to coerce the top-level Makefile into honoring/using the include/asm symlink if it exists, i.e., taking ARCH from readlink include/asm && sed -e 's/include-asm//', but sadly my makefile foo was not good enough.
---
~Randy
*** Remember to use Documentation/SubmitChecklist when testing your code ***
Hello Randy!
Quoted 4 lines · On Wednesday 19 September 2007 Randy Dunlap wrote:
Yes, I've tried to coerce the top-level
Makefileinto honoring/using theinclude/asmsymlink if it exists, i.e., taking ARCH from readlinkinclude/asm&& sed -e 's/include-asm//', but sadly my makefile foo was not good enough.
How about that?
readlink include/asm
returns
asm-um
in my case, so I only have to strip the "asm-" part ...
Regards,
Phil
Makefile +4 -1
@@ -163,6 +163,9 @@ SUBARCH := $(shell uname -m | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ \ -e s/s390x/s390/ -e s/parisc64/parisc/ \ -e s/ppc.*/powerpc/ -e s/mips.*/mips/ ) +# sadly perl is defined below ... so we can't use it here, can we? +ASMARCH := $(shell test -s include/asm && readlink include/asm | cut -f2 -d-) + # Cross compiling and selecting different set of gcc/bin-utils # --------------------------------------------------------------------------- #
@@ -182,7 +185,7 @@ SUBARCH := $(shell uname -m | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ \ # Default value for CROSS_COMPILE is not to prefix executables # Note: Some architectures assign CROSS_COMPILE in their arch/*/Makefile -ARCH ?= $(SUBARCH) +ARCH ?= $(or $(SUBARCH), $(ASMARCH)) CROSS_COMPILE ?= # Architecture as present in compile.h
Signature · 2 lines
Versioning your /etc, /home or even your whole installation?
Try fsvs (fsvs.tigris.org)!Quoted 5 lines · Philipp Marek
How about that?
readlinkinclude/asm
returns
asm-um
in my case, so I only have to strip the "asm-" part ...
It doesn't handle O= directories...
Jeff
Signature · 1 line
Work email - jdike at linux dot intel dot com
Hello Jeff,
Quoted 8 lines · Philipp Marek
Quoted 5 lines
How about that?
readlinkinclude/asm
returns
asm-um
in my case, so I only have to strip the "asm-" part ...It doesn't handle O= directories...
Sorry, I don't understand you. What are "0=" directories? Do you mean that if there's no include/ directory?
Well, I guess that there are non-obvious corner cases in the include/asm symlink usage, that amateurs simply do not know ...
Regards,
Phil
Signature · 2 lines
Versioning your /etc, /home or even your whole installation?
Try fsvs (fsvs.tigris.org)!Quoted 11 lines · Ph. Marek
Hello Jeff,
Quoted 8 lines · Philipp Marek
Quoted 5 lines
How about that?
readlinkinclude/asm
returns
asm-um
in my case, so I only have to strip the "asm-" part ...It doesn't handle O= directories...
Sorry, I don't understand you. What are "0=" directories?
When building a kernel you can specify an other output directory so you do not mix up your source tree with generated files. To do so do like this:
Prepare the stuff:
mkdir ~/kernel
cp .config ~/kernel
make mrproper
And then build the kernel:
make O=~/kernel
Sam
Quoted 8 lines
Quoted 3 lines
Quoted 2 lines
It doesn't handle O= directories...
Sorry, I don't understand you. What are "0=" directories?
When building a kernel you can specify an other output directory so you do not mix up your source tree with generated files. To do so do like this:
Quoted 7 lines
Prepare the stuff:
mkdir ~/kernel
cp .config ~/kernel
make mrproperAnd then build the kernel:
make O=~/kernel
Oh yes ... thats the character 'o', not the number zero ... Sorry, changing the font shows that :-)
Yes, that's right. Wouldn't $(srctree) help? That's defined just above, so should be fine.
Regards,
Phil
Signature · 2 lines
Versioning your /etc, /home or even your whole installation?
Try fsvs (fsvs.tigris.org)!Quoted 13 lines · Philipp Marek
Quoted 13 lines
Quoted 3 lines
Quoted 2 lines
It doesn't handle O= directories...
Sorry, I don't understand you. What are "0=" directories?
When building a kernel you can specify an other output directory so you do not mix up your source tree with generated files. To do so do like this:
Prepare the stuff:
mkdir ~/kernel
cp .config ~/kernel
make mrproper
Quoted 8 lines
Quoted 2 lines
And then build the kernel:
make O=~/kernelOh yes ... thats the character 'o', not the number zero ... Sorry, changing the font shows that :-)
Yes, that's right. Wouldn't $(srctree) help? That's defined just above, so should be fine.
We want a solution that:
- Always use the same ARCH as before
- Error out if user specify another ARCH
- Tell what ARCH is used to user
I will inspired by yprs and other patches try to cook up something. Hopefully my make-foo suffice.
Sam
Quoted 45 lines · On Wed, 19 Sep 2007 18:17:51 +0200 Philipp Marek wrote:
Hello Randy!
Quoted 4 lines · On Wednesday 19 September 2007 Randy Dunlap wrote:
Yes, I've tried to coerce the top-level
Makefileinto honoring/using theinclude/asmsymlink if it exists, i.e., taking ARCH from readlinkinclude/asm&& sed -e 's/include-asm//', but sadly my makefile foo was not good enough.How about that?
readlinkinclude/asm
returns
asm-um
in my case, so I only have to strip the "asm-" part ...Regards,
Phil
Makefile +4
-1@@ -163,6 +163,9 @@ SUBARCH := $(shell uname -m | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ \ -e s/s390x/s390/ -e s/parisc64/parisc/ \ -e s/ppc.*/powerpc/ -e s/mips.*/mips/ ) +# sadly perl is defined below ... so we can't use it here, can we? +ASMARCH := $(shell test -s include/asm && readlink include/asm | cut -f2 -d-) + # Cross compiling and selecting different set of gcc/bin-utils # --------------------------------------------------------------------------- #@@ -182,7 +185,7 @@ SUBARCH := $(shell uname -m | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ \ # Default value for CROSS_COMPILE is not to prefix executables # Note: Some architectures assign CROSS_COMPILE in their arch/*/Makefile -ARCH ?= $(SUBARCH) +ARCH ?= $(or $(SUBARCH), $(ASMARCH)) CROSS_COMPILE ?= # Architecture as present in compile.hSignature · 1 line
--
This doesn't work when there is no include/asm symlink.
It also didn't apply cleanly due to tab(s) being converted to spaces (but of course I fixed that part).
---
~Randy
Hello Randy!
Quoted 1 line
This doesn't work when there is no
include/asmsymlink.
Why? I specifically test for that, and tried it on my machine. What's the bug?
ASMARCH should come out empty, and the ?= and $(or) should take care of the rest ...
Quoted 2 lines
It also didn't apply cleanly due to tab(s) being converted to spaces (but of course I fixed that part).
Yes, sorry. I'll try to attach inline next time.
Regards,
Phil
Signature · 2 lines
Versioning your /etc, /home or even your whole installation?
Try fsvs (fsvs.tigris.org)!Quoted 7 lines · On Thu, 20 Sep 2007 07:42:38 +0200 (CEST) Ph. Marek wrote:
Hello Randy!
Quoted 1 line
This doesn't work when there is no
include/asmsymlink.Why? I specifically test for that, and tried it on my machine. What's the bug?
ASMARCH should come out empty, and the ?= and $(or) should take care of the rest ...
Sorry, I can't reproduce it now.
The variable was coming out empty though. I saw path strings like
linux-2.6.23-rc6/arch//Makefile
Hopefully Sam can fix it all up. :)
Quoted 3 lines
Quoted 2 lines
It also didn't apply cleanly due to tab(s) being converted to spaces (but of course I fixed that part).
Yes, sorry. I'll try to attach inline next time.
---
~Randy
*** Remember to use Documentation/SubmitChecklist when testing your code ***
Quoted 7 lines · On Tuesday 18 September 2007 Jeff Dike wrote:
Quoted 2 lines · Philipp Marek
I'm trying to build a UML machine on x86-64 (config attached) but I'm getting compile errors.
Builds for me. Did you start with an mrproper? These errors look like the UML build getting confused by left-overs from an
x86_64build.
No, I didn't. Shouldn't that get cleaned up by a (completely new) config anyway?
I'll try and tell you tomorrow.
Thank you!
Regards,
Phil
Signature · 2 lines
Versioning your /etc, /home or even your whole installation?
Try fsvs (fsvs.tigris.org)!