snd-hda-intel on Medion WIM2160

Hi,
On Medion WIM2160 notebooks (soundchip PCI ID 8086:27d8/17c0:4071), snd-hda-intel loads and everything acts like it's working, but there's no sound. The master volume is muted and there's no way to unmute it.

The patch below fixes it, but unfortunately, Medion MD2 uses the same PCI (and subvendor/subdevice) ID -- so the patch quite likely breaks Medion MD2 support.

WIM2160's soundchip has revision ID 02 - if MD2 uses something else, maybe that can be used to identify them and do the right thing. (I don't have an MD2...).

ttyl
bero

--- linux-2.6.22/sound/pci/hda/patch_realtek.c.wim2160snd~ 2007-07-09
01:32:17.000000000 +0200
+++ linux-2.6.22/sound/pci/hda/patch_realtek.c 2007-09-09 20:28:55.000000000
+0200
@@ -159,6 +159,7 @@
ALC883_ACER,
ALC883_MEDION,
ALC883_MEDION_MD2,
+ ALC883_MEDION_WIM2160,
ALC883_LAPTOP_EAPD,
ALC883_LENOVO_101E_2ch,
ALC883_LENOVO_NB0763,
@@ -5995,6 +5996,32 @@
{ } /* end */
};

+static struct snd_kcontrol_new alc883_medion_wim2160_mixer[] = {
+ HDA_CODEC_VOLUME("Master Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
+ HDA_BIND_MUTE("Master Playback Switch", 0x0c, 2, HDA_INPUT),
+ HDA_CODEC_MUTE("Headphone Playback Switch", 0x14, 0x0, HDA_OUTPUT),
+ HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT),
+ HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT),
+ HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
+ HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
+ HDA_CODEC_VOLUME("iMic Playback Volume", 0x0b, 0x1, HDA_INPUT),
+ HDA_CODEC_MUTE("iMic Playback Switch", 0x0b, 0x1, HDA_INPUT),
+ HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT),
+ HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT),
+ HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x09, 0x0, HDA_INPUT),
+ HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x09, 0x0, HDA_INPUT),
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ /* .name = "Capture Source", */
+ .name = "Input Source",
+ .count = 2,
+ .info = alc883_mux_enum_info,
+ .get = alc883_mux_enum_get,
+ .put = alc883_mux_enum_put,
+ },
+ { } /* end */
+};
+
static struct snd_kcontrol_new alc883_chmode_mixer[] = {
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
@@ -6364,6 +6391,7 @@
[ALC883_ACER] = "acer",
[ALC883_MEDION] = "medion",
[ALC883_MEDION_MD2] = "medion-md2",
+ [ALC883_MEDION_WIM2160] = "medion-wim2160",
[ALC883_LAPTOP_EAPD] = "laptop-eapd",
[ALC883_LENOVO_101E_2ch] = "lenovo-101e",
[ALC883_LENOVO_NB0763] = "lenovo-nb0763",
@@ -6401,6 +6429,7 @@
SND_PCI_QUIRK(0x17aa, 0x3bfd, "Lenovo NB0763", ALC883_LENOVO_NB0763), SND_PCI_QUIRK(0x17aa, 0x2085, "Lenovo NB0763", ALC883_LENOVO_NB0763),
- SND_PCI_QUIRK(0x17c0, 0x4071, "MEDION MD2", ALC883_MEDION_MD2),
+ //SND_PCI_QUIRK(0x17c0, 0x4071, "MEDION MD2", ALC883_MEDION_MD2),
+ SND_PCI_QUIRK(0x17c0, 0x4071, "Medion WIM2160", ALC883_MEDION_WIM2160),
{}
};

@@ -6530,6 +6559,19 @@
.unsol_event = alc883_medion_md2_unsol_event, .init_hook = alc883_medion_md2_automute,
},
+ [ALC883_MEDION_WIM2160] = {
+ .mixers = { alc883_medion_wim2160_mixer },
+ .init_verbs = { alc883_init_verbs, alc883_lenovo_nb0763_verbs},
+ .num_dacs = ARRAY_SIZE(alc883_dac_nids),
+ .dac_nids = alc883_dac_nids,
+ .num_adc_nids = ARRAY_SIZE(alc883_adc_nids),
+ .adc_nids = alc883_adc_nids,
+ .num_channel_mode = ARRAY_SIZE(alc883_3ST_2ch_modes),
+ .channel_mode = alc883_3ST_2ch_modes,
+ .input_mux = &alc883_lenovo_nb0763_capture_source,
+ .unsol_event = alc883_medion_md2_unsol_event,
+ .init_hook = alc883_medion_md2_automute,
+ },
[ALC883_LAPTOP_EAPD] = {
.mixers = { alc883_base_mixer,
alc883_chmode_mixer },

At Tue, 11 Sep 2007 14:16:24 +0200,

In that case, try to reset board_config after snd_hda_check_board_config() but before setup_preset(). See patch_alc885() for example (appeariny in the latest ALSA tree, also in mm tree).

Otherwise it looks OK to me. But, what is the primary difference in the setup between MD2 and WIM2160?

Thanks,

Takashi

Will do...

I don't know -- I made it work by trial and error (I don't have access to any hardware specs or the likes). By some more trial and error, I could minimize the patch some more - it's down to editing the init_verbs and mixers. In the mixers, this one seems to be the key:
HDA_BIND_MUTE("Master Playback Switch", 0x0c, 2, HDA_INPUT)

Maybe we can get it to work with both MD2 and WIM2160 by using the MD2 mixers with this one added.

I'm not familiar enough with sound drivers in general to fiddle with the verbs and be reasonably sure I'm not breaking the MD2.

@@ -169,6 +169,7 @@
 	ALC883_ACER,
 	ALC883_MEDION,
 	ALC883_MEDION_MD2,	
+	ALC883_MEDION_WIM2160,
 	ALC883_LAPTOP_EAPD,
 	ALC883_LENOVO_101E_2ch,
 	ALC883_LENOVO_NB0763,

@@ -6235,6 +6236,32 @@
 	{ } /* end */
 };
 
+static struct snd_kcontrol_new alc883_medion_wim2160_mixer[] = {
+	HDA_CODEC_VOLUME("Master Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
+	HDA_BIND_MUTE("Master Playback Switch", 0x0c, 2, HDA_INPUT),
+	HDA_CODEC_MUTE("Headphone Playback Switch", 0x14, 0x0, HDA_OUTPUT),
+	HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT),
+	HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT),
+	HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
+	HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
+	HDA_CODEC_VOLUME("iMic Playback Volume", 0x0b, 0x1, HDA_INPUT),
+	HDA_CODEC_MUTE("iMic Playback Switch", 0x0b, 0x1, HDA_INPUT),
+	HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT),
+	HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT),
+	HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x09, 0x0, HDA_INPUT),
+	HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x09, 0x0, HDA_INPUT),
+	{
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		/* .name = "Capture Source", */
+		.name = "Input Source",
+		.count = 2,
+		.info = alc883_mux_enum_info,
+		.get = alc883_mux_enum_get,
+		.put = alc883_mux_enum_put,
+	},
+	{ } /* end */
+};	
+
 static struct snd_kcontrol_new alc883_chmode_mixer[] = {
 	{
 		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,

@@ -6640,6 +6667,7 @@
 	[ALC883_ACER]		= "acer",
 	[ALC883_MEDION]		= "medion",
 	[ALC883_MEDION_MD2]	= "medion-md2",
+	[ALC883_MEDION_WIM2160]	= "medion-wim2160",
 	[ALC883_LAPTOP_EAPD]	= "laptop-eapd",
 	[ALC883_LENOVO_101E_2ch] = "lenovo-101e",
 	[ALC883_LENOVO_NB0763]	= "lenovo-nb0763",

@@ -6684,7 +6712,8 @@
 	SND_PCI_QUIRK(0x103c, 0x2a61, "HP Nettle", ALC888_6ST_HP),
 	SND_PCI_QUIRK(0x103c, 0x2a60, "HP Lucknow", ALC888_3ST_HP),
 	SND_PCI_QUIRK(0x103c, 0x2a4f, "HP Samba", ALC888_3ST_HP),
-	SND_PCI_QUIRK(0x17c0, 0x4071, "MEDION MD2", ALC883_MEDION_MD2),
+	//SND_PCI_QUIRK(0x17c0, 0x4071, "MEDION MD2", ALC883_MEDION_MD2),
+	SND_PCI_QUIRK(0x17c0, 0x4071, "Medion WIM2160", ALC883_MEDION_WIM2160),
 	{}
 };
 

@@ -6814,6 +6843,20 @@
 		.unsol_event = alc883_medion_md2_unsol_event,
 		.init_hook = alc883_medion_md2_automute,
 	},	
+	[ALC883_MEDION_WIM2160] = {
+		.mixers = { alc883_medion_wim2160_mixer },
+		.init_verbs = { alc883_init_verbs, alc883_lenovo_nb0763_verbs},
+		.num_dacs = ARRAY_SIZE(alc883_dac_nids),
+		.dac_nids = alc883_dac_nids,
+		.dig_out_nid = ALC883_DIGOUT_NID,
+		.num_adc_nids = ARRAY_SIZE(alc883_adc_nids),
+		.adc_nids = alc883_adc_nids,
+		.num_channel_mode = ARRAY_SIZE(alc883_3ST_2ch_modes),
+		.channel_mode = alc883_3ST_2ch_modes,
+		.input_mux = &alc883_capture_source,
+		.unsol_event = alc883_medion_md2_unsol_event,
+		.init_hook = alc883_medion_md2_automute,
+	},
 	[ALC883_LAPTOP_EAPD] = {
 		.mixers = { alc883_base_mixer,
 			    alc883_chmode_mixer },

_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

At Wed, 19 Sep 2007 20:26:27 +0200,

Hmm, these should be constantly unmuted at initialization via alc883_medion_md2_verbs[] in MD2 model, too.

Could you double-check whether MD2 model doesn't work? If really not works, check codec#* output whether the inputs of NID 0x0c get unmuted or not.

Takashi