Skip to contentSkip to conversation

Problems with 2.6.23-rc6 on AMD Geode LX800

DISCUSSION Joerg Pommnitz 2 participants 2 messages Sep 25, 2007

lore
Share & tools
lore
#0 lore raw

Chuck, Jordan,
thanks for taking an interest in this problem. As suggested by Jordan I tried a new BIOS revision from
http://www.digitallogic.ch/index.php?id=256&dir=/MSEP800%20-%20SM800PCX%20%20-%20MPC20%20-%20MPC21&mountpoint=23

Unfortunately the kernel still fails to boot in the same way.

Do you still need the disassembled reserve_bootmem_core?

Signature · 7 lines
Thanks and kind regards
 Joerg



      ________ 
Yahoo! Clever: Stellen Sie Fragen und finden Sie Antworten. Teilen Sie Ihr Wissen. www.yahoo.de/clever
#1 lore raw
Quoted 6 lines · Joerg Pommnitz

Chuck, Jordan,
thanks for taking an interest in this problem. As suggested by Jordan I tried a new BIOS revision from
http://www.digitallogic.ch/index.php?id=256&dir=/MSEP800%20-%20SM800PCX%20%20-%20MPC20%20-%20MPC21&mountpoint=23

Unfortunately the kernel still fails to boot in the same way.

You'll have to contact Digital Logic and have them check with the BIOS vendor to see if the fix was made in that version or not. I don't have that particular board, so I can't try out the fixes here.

I'm still trying to track down the particulars of the fix from the BIOS vendor. I'll let you know.

Quoted 1 line

Do you still need the disassembled reserve_bootmem_core?

Sure - you might as well - just to make sure its the same problem.

Jordan

Signature · 3 lines
Jordan Crouse
Systems Software Development Engineer 
Advanced Micro Devices, Inc.