Skip to contentSkip to conversation

getting FUSD compiled with current kernels

DISCUSSION Florian Schmidt 3 participants 7 messages Sep 29, 2007 – Sep 30, 2007

lore
Share & tools
lore
#0 lore raw

Hi,

I'm trying to build FUSD [1] against current kernels [2.6.22]. I get errors [2]:

I tried looking into it but not being a kernel hacker i must admit i didn't even find out where sysfs_dentry is defined (so i can make the type complete). Or whether this would even be the correct way to fix it..

My goal is to hack up oss2jack [3] to use ALSA pcm devices.. And a later goal is to create a virtual ALSA soundcard [which would multiplex access to a real non hw-mixing capable soundcard] to finally end the dmix software mixing woes linux users have to endure for the last years :)

I don't expect you to fix it for me. I would just be glad about infos on where to get more infos enabling me to fix this :) Of course the more concise and practical the advice the better :)

Regards,
Flo

[1] http://svn.xiph.org/trunk/fusd

[2] ~/source/build_stuff/fusd$ make
make -C libfusd
make[1]: Entering directory /home/tapas/source/build_stuff/fusd/libfusd' make[1]: Nothing to be done for default'.
make[1]: Leaving directory `/home/tapas/source/build_stuff/fusd/libfusd' make -C kfusd
make[1]: Entering directory `/home/tapas/source/build_stuff/fusd/kfusd' make -C /lib/modules/2.6.22-11-generic/build SUBDIRS=/home/tapas/source/build_st
uff/fusd/kfusd EXTRA_CFLAGS=-I/home/tapas/source/build_stuff/fusd/kfusd/../inclu de modules
make[2]: Entering directory `/usr/src/linux-headers-2.6.22-11-generic'
CC [M] /home/tapas/source/build_stuff/fusd/kfusd/kfusd.o
/home/tapas/source/build_stuff/fusd/kfusd/kfusd.c: In function ‘to_kobj’:
/home/tapas/source/build_stuff/fusd/kfusd/kfusd.c:135: error: dereferencing poin
ter to incomplete type /home/tapas/source/build_stuff/fusd/kfusd/kfusd.c: In
function ‘fusd_register_de
vice’:
/home/tapas/source/build_stuff/fusd/kfusd/kfusd.c:2049: error: ‘struct kset’ has
no member named ‘kset’
/home/tapas/source/build_stuff/fusd/kfusd/kfusd.c:2049: warning: type defaults t
o ‘int’ in declaration of ‘__mptr’ /home/tapas/source/build_stuff/fusd/kfusd/kfusd.c:2049: warning:
initialization
from incompatible pointer type /home/tapas/source/build_stuff/fusd/kfusd/kfusd.c:2049: error: ‘struct kset’ has
no member named ‘kset’
/home/tapas/source/build_stuff/fusd/kfusd/kfusd.c: At top level:
/home/tapas/source/build_stuff/fusd/kfusd/kfusd.c:2603: error: unknown field ‘wr
itev’ specified in initializer /home/tapas/source/build_stuff/fusd/kfusd/kfusd.c:2603: warning:
initialization
from incompatible pointer type
make[3]: *** [/home/tapas/source/build_stuff/fusd/kfusd/kfusd.o] Error 1 make[2]: *** [_module_/home/tapas/source/build_stuff/fusd/kfusd] Error 2 make[2]: Leaving directory `/usr/src/linux-headers-2.6.22-11-generic' make[1]: *** [default] Error 2
make[1]: Leaving directory `/home/tapas/source/build_stuff/fusd/kfusd'
make: *** [default] Error 2

[3] http://fort.xdas.com/~kor/oss2jack/

Signature · 2 lines
Palimm Palimm!
http://tapas.affenbande.org
#1 lore raw
Quoted 4 lines · Florian Schmidt

Hi,

I'm trying to build FUSD [1] against current kernels [2.6.22]. I get errors [2]:

Oh i forgot to show the code snippets in question. I put them to the crresponding error below [matching line number is marked with [*]]:

Quoted 11 lines

[2] ~/source/build_stuff/fusd$ make
make -C libfusd
make[1]: Entering directory /home/tapas/source/build_stuff/fusd/libfusd' make[1]: Nothing to be done for default'.
make[1]: Leaving directory `/home/tapas/source/build_stuff/fusd/libfusd' make -C kfusd
make[1]: Entering directory `/home/tapas/source/build_stuff/fusd/kfusd' make -C /lib/modules/2.6.22-11-generic/build SUBDIRS=/home/tapas/source/build_st
uff/fusd/kfusd

Quoted 8 lines

EXTRA_CFLAGS=-I/home/tapas/source/build_stuff/fusd/kfusd/../inclu de modules
make[2]: Entering directory `/usr/src/linux-headers-2.6.22-11-generic'
CC [M] /home/tapas/source/build_stuff/fusd/kfusd/kfusd.o
/home/tapas/source/build_stuff/fusd/kfusd/kfusd.c: In function ‘to_kobj’:
/home/tapas/source/build_stuff/fusd/kfusd/kfusd.c:135: error: dereferencing poin
ter to incomplete type

static inline struct kobject * to_kobj(struct dentry * dentry) {
struct sysfs_dirent * sd = dentry->d_fsdata; if(sd)

    return ((struct kobject *) sd->s_element); [*]
  else
    return NULL;
}
Quoted 6 lines

/home/tapas/source/build_stuff/fusd/kfusd/kfusd.c: In function ‘fusd_register_de
vice’:
/home/tapas/source/build_stuff/fusd/kfusd/kfusd.c:2049: error: ‘struct kset’ has
no member named ‘kset’

[...]

            if(classdir2){
              // jackpot.  extract the class.
              struct kobject *ko = to_kobj(classdir2);
              sys_class = (ko?to_class(ko):NULL); [*]

              if(!sys_class)
                RDEBUG(2, "WARNING: sysfs entry for %s has no kobject!
\n",register_msg.clazz);
            }

[...]

Quoted 8 lines

/home/tapas/source/build_stuff/fusd/kfusd/kfusd.c:2049: warning: type defaults t
o ‘int’ in declaration of ‘__mptr’ /home/tapas/source/build_stuff/fusd/kfusd/kfusd.c:2049: warning:
initialization

Quoted 1 line

from incompatible pointer type

Quoted 7 lines

/home/tapas/source/build_stuff/fusd/kfusd/kfusd.c:2049: error: ‘struct kset’ has
no member named ‘kset’
/home/tapas/source/build_stuff/fusd/kfusd/kfusd.c: At top level:
/home/tapas/source/build_stuff/fusd/kfusd/kfusd.c:2603: error: unknown field ‘wr
itev’ specified in initializer

STATIC struct file_operations fusd_fops = {

  owner:    THIS_MODULE,
  open:     fusd_open,
  read:     fusd_read,
  write:    fusd_write,
  writev:   fusd_writev, [*]
  release:  fusd_release,
  poll:     fusd_poll,

};

Quoted 13 lines

/home/tapas/source/build_stuff/fusd/kfusd/kfusd.c:2603: warning:
initialization

Quoted 1 line

from incompatible pointer type

make[3]: *** [/home/tapas/source/build_stuff/fusd/kfusd/kfusd.o] Error 1 make[2]: *** [_module_/home/tapas/source/build_stuff/fusd/kfusd] Error 2 make[2]: Leaving directory `/usr/src/linux-headers-2.6.22-11-generic' make[1]: *** [default] Error 2
make[1]: Leaving directory `/home/tapas/source/build_stuff/fusd/kfusd'
make: *** [default] Error 2

[3] http://fort.xdas.com/~kor/oss2jack/

Signature · 2 lines
Palimm Palimm!
http://tapas.affenbande.org
#2 lore raw
Quoted 7 lines · Florian Schmidt
Quoted 4 lines · Florian Schmidt

Hi,

I'm trying to build FUSD [1] against current kernels [2.6.22]. I get errors [2]:

Oh i forgot to show the code snippets in question. I put them to the

Oh and i also forget to mention that i get the same errors when using:

KDIR=/usr/src/linux-source-2.6.22/ make

[Where the ubuntu kernel package put the source. I configured it with the default ubuntu .config and make oldconfig]. I get one more message though:

~/source/build_stuff/fusd/kfusd$ KDIR=/usr/src/linux-source-2.6.22/ make make -C /usr/src/linux-source-2.6.22/ SUBDIRS=/home/tapas/source/build_stuff/fusd/kfusd EXTRA_CFLAGS=-I/home/tapas/source/build_stuff/fusd/kfusd/../include modules make[1]: Entering directory `/usr/src/linux-source-2.6.22'

WARNING: Symbol version dump /usr/src/linux-source-2.6.22/Module.symvers
is missing; modules will have no dependencies and modversions.

CC [M] /home/tapas/source/build_stuff/fusd/kfusd/kfusd.o
/home/tapas/source/build_stuff/fusd/kfusd/kfusd.c: In function ‘to_kobj’:
/home/tapas/source/build_stuff/fusd/kfusd/kfusd.c:135: error: dereferencing pointer to incomplete type
[...]

Regards,
Flo

Signature · 2 lines
Palimm Palimm!
http://tapas.affenbande.org
#3 lore raw
Quoted 16 lines · Florian Schmidt
Quoted 7 lines · Florian Schmidt
Quoted 4 lines · Florian Schmidt

Hi,

I'm trying to build FUSD [1] against current kernels [2.6.22]. I get errors [2]:

Oh i forgot to show the code snippets in question. I put them to the

Oh and i also forget to mention that i get the same errors when using:

KDIR=/usr/src/linux-source-2.6.22/ make

[Where the ubuntu kernel package put the source. I configured it with the default ubuntu .config and make oldconfig]. I get one more message though:

Quoted 8 lines

~/source/build_stuff/fusd/kfusd$ KDIR=/usr/src/linux-source-2.6.22/ make make -C /usr/src/linux-source-2.6.22/ SUBDIRS=/home/tapas/source/build_stuff/fusd/kfusd EXTRA_CFLAGS=-I/home/tapas/source/build_stuff/fusd/kfusd/../include modules make[1]: Entering directory `/usr/src/linux-source-2.6.22'

WARNING: Symbol version dump /usr/src/linux-source-2.6.22/Module.symvers
is missing; modules will have no dependencies and modversions.

This is because you build using a kernel with a non-complete build. Maybe ubuntu locate output files somewhere else?

If thats the case use:
export KBUILD_OUTPUT=dir
make

to tell kbuild where to find the output files for the kernel source.

Sam

#4 lore raw
In reply to Florian Schmidt
Quoted 4 lines · Florian Schmidt

My goal is to hack up oss2jack [3] to use ALSA pcm devices.. And a later goal is to create a virtual ALSA soundcard [which would multiplex access to a real non hw-mixing capable soundcard] to finally end the dmix software mixing woes linux users have to endure for the last years :)

What problems with ALSA's userspace mixing are you trying to solve?

Lee

#5 lore raw
Quoted 7 lines · Lee Revell
Quoted 4 lines · Florian Schmidt

My goal is to hack up oss2jack [3] to use ALSA pcm devices.. And a later goal is to create a virtual ALSA soundcard [which would multiplex access to a real non hw-mixing capable soundcard] to finally end the dmix software mixing woes linux users have to endure for the last years :)

What problems with ALSA's userspace mixing are you trying to solve?

I think that for example the aoss approach to providing software mixing to OSS apps is fundamentally flawed. The LD_PRELOAD_LIBRARY mechanism does not work for all applications. The OSS emultion in ALSA that does work for pretty much all OSS apps is the kernel level OSS emulation [which directly provides the OSS conform device files] sitting directly on an ALSA device driver module. Having a virtual ALSA soundcard which would route back to userspace one could make the OSS emu use this device instead providing to-userspace routing of all OSS apps..

The same argument, though in a weaker form holds for badly coded ALSA apps which open soundcards "directly" via "hw:0" pcm device names. It would be cool, if these could be made to play nice trivially. Here again, a virtual ALSA device which routes back to userspace would be great..

Simply make the virtual device card 0 in the system..

Dmix wouldn't be obsoleted by this at all. I'm not sure on the details (still learning), but the virtual ALSA device routing the signal back to user space could then in turn use dmix on a real alsa device to provide the sw mixing (it would indeed be a very thin userspace driver as it basically directly uses an ALSA pcm as "slave")..

This is not thought of as a replacement for ALSA userspace libasound2.. Not at all. It's just a cool thing to have (tm) in many situations, solving these cases which drive some ALSA users (me included) nuts :)

Regards,
Flo

Signature · 2 lines
Palimm Palimm!
http://tapas.affenbande.org
#6 lore raw
Quoted 9 lines · Florian Schmidt
Quoted 8 lines · Lee Revell
Quoted 5 lines · Florian Schmidt

My goal is to hack up oss2jack [3] to use ALSA pcm devices.. And a later goal is to create a virtual ALSA soundcard [which would multiplex access to a real non hw-mixing capable soundcard] to finally end the dmix software mixing woes linux users have to endure for the last years :)

What problems with ALSA's userspace mixing are you trying to solve?

[snip]

Thinking about it some more i think the plan isn't quite as simple to implement as i thought..

Some more work would have to be done than to simply provide the device file infrastructure of an ALSA device driver.. Well, right now, i'm happy enough to have oss2jack and kfusd built and running..

Regards,
Flo

Signature · 2 lines
Palimm Palimm!
http://tapas.affenbande.org