software unplug and plug USB
Quoted 4 lines
I'm using a huawei E220 modem and occasionally it doesn't work and I must unplug and plug it again, run the scripts connection to make it works again.
how can I unplug an plug an USB modem via software?
If the modem doesn't have any other power sources than USB, just removing the modem's and USB modules, and the modprobing them again should help.
Just take care if you have it connected to the PC with a USB keyboard ;)
Signature · 2 lines
Tomasz Chmielewski http://blog.wpkg.org
actually, I have a USB keyboard, could that be the problem? why?
removing and adding modules doesn't solve my problem... The USB has several functions: modem and usb mass storage and only the storage one is recognized
:(
any thoughts?
Quoted 12 lines · Tomasz Chmielewski
Quoted 4 lines
I'm using a huawei E220 modem and occasionally it doesn't work and I must unplug and plug it again, run the scripts connection to make it works again.
how can I unplug an plug an USB modem via software?If the modem doesn't have any other power sources than USB, just removing the modem's and USB modules, and the modprobing them again should help.
Just take care if you have it connected to the PC with a USB keyboard ;)
Quoted 1 line · Miguel
actually, I have a USB keyboard, could that be the problem? why?
Because when you remove USB modules, USB devices, including USB keyboards, won't work...
Quoted 3 lines
removing and adding modules doesn't solve my problem... The USB has several functions: modem and usb mass storage and only the storage one is recognized :(
What modules exactly do you unload/load again, in what order, using which commands?
Signature · 2 lines
Tomasz Chmielewski http://blog.wpkg.org
I also have a mobile phone connected, a gps and a keyboard, i do the following:
ecar@ecar:~$ lsmod | grep usb usbserial 29928 1 pl2303 usbtouchscreen 8708 0 usbcore 130304 7 libusual,pl2303,usbserial,usbtouchscreen,ehci_hcd,uhci_hcd ecar@ecar:~$ rmmod pl2303 ERROR: Removing 'pl2303': Operation not permitted ecar@ecar:~$ sudo rmmod pl2303 ecar@ecar:~$ sudo rmmod usbserial ecar@ecar:~$ modprobe usbserial FATAL: Error inserting usbserial (/lib/modules/2.6.17-11-386/kernel/drivers/usb/serial/usbserial.ko): Operation not permitted (reverse-i-search)`mod': cd backup_modules/ (reverse-i-search)`modpro': sudo modprobe ehci_hcd ecar@ecar:~$ sudo modprobe usbserial vendor=0x12d1 product=0x1003 ecar@ecar:~$ lsmod | grep usb usbserial 29928 0 usbtouchscreen 8708 0 usbcore 130304 6 usbserial,libusual,usbtouchscreen,ehci_hcd,uhci_hcd
but only when I unplug and plug manually, the modem starts up ... Because of that i wanted to unplug/plug via scripting (software way)
Quoted 16 lines · Tomasz Chmielewski
Quoted 1 line · Miguel
actually, I have a USB keyboard, could that be the problem? why?
Because when you remove USB modules, USB devices, including USB keyboards, won't work...
Quoted 4 lines
removing and adding modules doesn't solve my problem... The USB has several functions: modem and usb mass storage and only the storage one is recognized
:(What modules exactly do you unload/load again, in what order, using which commands?
Quoted 2 lines · Miguel
but only when I unplug and plug manually, the modem starts up ... Because of that i wanted to unplug/plug via scripting (software way)
You might try this (bottom of the page):
http://lkml.org/lkml/2007/5/28/193
regards,
Signature · 2 lines
Jiri Slaby ([email protected]) Faculty of Informatics, Masaryk University
Am Montag 01 Oktober 2007 schrieb Miguel:
Quoted 2 lines
but only when I unplug and plug manually, the modem starts up ... Because of that i wanted to unplug/plug via scripting (software way)
You can use the bind & unbind attributes in sysfs.
Regards
Oliver
Quoted 4 lines · Miguel
I also have a mobile phone connected, a gps and a keyboard, i do the following:
Quoted 8 lines
ecar@ecar:~$ lsmod | grep usb usbserial 29928 1 pl2303 usbtouchscreen 8708 0 usbcore 130304 7 libusual,pl2303,usbserial,usbtouchscreen,ehci_hcd,uhci_hcd ecar@ecar:~$ rmmod pl2303 ERROR: Removing 'pl2303': Operation not permitted ecar@ecar:~$ sudo rmmod pl2303 ecar@ecar:~$ sudo rmmod usbserial
Only then It's not enough. You also have to remove ehci_hcd / uhci_hcd
/ ohci_hcd.the device will be powered off (unless the method described in the link given by Jiri Slaby powers the device off, too).
Quoted 5 lines
ecar@ecar:~$ modprobe usbserial FATAL: Error inserting usbserial (/lib/modules/2.6.17-11-386/kernel/drivers/usb/serial/usbserial.ko): Operation not permitted (reverse-i-search)`mod': cd backup_modules/
cd backup_modules/? Where do you keep your modules?
Signature · 2 lines
Tomasz Chmielewski http://blog.wpkg.org
if I remove ehci_hcd / uhci_hcd / ohci_hcd , some other devices like touchscreen, GPS and keyboard could stop working.
backup_modules doesn't matter here, is my personal backup. I have tried also to recompile some modules because some times my modem huaweis is recognized like usb mass storage.
I will try a how to guide to do what oliver commented
"You can use the bind & unbind attributes in sysfs"
where can i find information about that?
kindest regards
Quoted 2 lines · Tomasz Chmielewski
ehci_hcd/uhci_hcd
/ohci_hcd
Quoted 7 lines · Miguel
if I remove
ehci_hcd/uhci_hcd/ohci_hcd, some other devices like touchscreen, GPS and keyboard could stop working.
backup_modulesdoesn't matter here, is my personal backup. I have tried also to recompile some modules because some times my modem huaweis is recognized like usb mass storage.
Quoted 5 lines
I will try a how to guide to do what oliver commented
"You can use the bind & unbind attributes in sysfs"
where can i find information about that?
gee, here:
http://lkml.org/lkml/2007/5/28/193