Skip to contentSkip to conversation

processor specific drivers: drivers/ or cpu/$proc/ ?

U-Boot-Users Mike Frysinger 2 participants 2 messages Oct 1, 2007

lore
Share & tools
lore
#0 lore raw

another area of inconsistency ... if i have a driver for an on-chip peripheral, should it live in the cpu/$proc/ tree or driver/ tree ? for example, a driver for the UART or TWI or MAC ...
-mike
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 827 bytes
Desc: This is a digitally signed message part.
Url : http://lists.denx.de/pipermail/u-boot/attachments/20071001/ceffe9ff/attachment.pgp

#1 lore raw

Mike,

Quoted 3 lines · Mike Frysinger

another area of inconsistency ... if i have a driver for an on-chip peripheral, should it live in the cpu/$proc/ tree or driver/ tree ? for example, a driver for the UART or TWI or MAC ...

Plan is to move all those drivers into drivers/xxx/yyy. So a uart driver for example should live in

drivers/serial/

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================