Skip to contentSkip to conversation

shutdown -h now, 2.6.23-rc8 & 9

DISCUSSION Gene Heskett 3 participants 4 messages Oct 2, 2007 – Oct 3, 2007 1 message not in the archive

lore
Share & tools
lore
#0 lore raw

Greetings everybody;

After seeing a message indicating that rc8 no longer did a powerdown, I thought I'd check that since I needed to, my tv card wasn't even showing up in the lspci report. It was partially backed out of the pci slot, this case seems to encourage that.

Indeed it went to the system halted message and just sat there. I hadn't yet booted to rc9 as amanda was running, so I did just a few minutes ago.

After the reboot to rc9, I ran a make xconfig again to check that the option was enabled, but it seems to have disappeared from the menus in xconfig.

Why was this removed? Or if moved, where to?

Thanks.

Signature · 6 lines
Cheers, Gene
"There are four boxes to be used in defense of liberty:
 soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
<mdorman> I'm a gnus person myself.  It's an editor!  It's a floorwax!
          It's a dessert topping!
#1 lore raw
Quoted 7 lines · Gene Heskett

Greetings everybody;

After seeing a message indicating that rc8 no longer did a powerdown, I thought I'd check that since I needed to, my tv card wasn't even showing up in the lspci report. It was partially backed out of the pci slot, this case seems to encourage that.

Quoted 7 lines

Indeed it went to the system halted message and just sat there. I hadn't yet booted to rc9 as amanda was running, so I did just a few minutes ago.

After the reboot to rc9, I ran a make xconfig again to check that the option was enabled, but it seems to have disappeared from the menus in xconfig.

Why was this removed? Or if moved, where to?

Hm, which option?

Greetings,
Rafael

#2 lore raw
In reply to Gene Heskett
Quoted 4 lines · Gene Heskett

Greetings everybody;

After seeing a message indicating that rc8 no longer did a powerdown, I thought I'd check that since I needed to, my tv card wasn't even showing up in the lspci report. It was partially backed out of the pci slot, this case seems to encourage that.

I have rc8-git3 running on several machines, and I'm delighted to say that it powers down, reboots, and suspends to mem/disk without bothering to patch in suspend2. I saw the same message, but perhaps git3 had the fix, since machines go down correctly. I'm going to boot a laptop off CD
and try the rc9 on that to see if the wireless issues I had to patch
around are fixed as promised. If so I'll go to the newest kernel for power saving.

Quoted 6 lines

Indeed it went to the system halted message and just sat there. I hadn't yet booted to rc9 as amanda was running, so I did just a few minutes ago.

After the reboot to rc9, I ran a make xconfig again to check that the option was enabled, but it seems to have disappeared from the menus in xconfig.

Why was this removed? Or if moved, where to?

What? Was what removed?

Signature · 3 lines
Bill Davidsen <[email protected]>
  "We have more to fear from the bungling of the incompetent than from
the machinations of the wicked."  - from Slashdot

A message that is not in the archive (sent off-list or not yet received): [email protected]

#4 lore raw
Quoted 11 lines · Gene Heskett
Quoted 9 lines · Bill Davidsen
Quoted 7 lines · Gene Heskett

Indeed it went to the system halted message and just sat there. I hadn't yet booted to rc9 as amanda was running, so I did just a few minutes ago.

After the reboot to rc9, I ran a make xconfig again to check that the option was enabled, but it seems to have disappeared from the menus in xconfig.

Quoted 10 lines
Quoted 4 lines
Quoted 2 lines

Why was this removed? Or if moved, where to?

What? Was what removed?

This phrase has not existed in any .config newer than 2.6.23-rc1 here:
CONFIG_APM_REAL_MODE_POWER_OFF=y

Yes, it's still there as of 23-rc8-git5, the latest source I've built on this machine. If you start menuconfig and search for the value, (I used "/APM") you will see that it now depends on various other options. I haven't personally needed it in a long time, but there are ACPI implementations which are seriously broken. And probably some embedded hardware and/or hand-held devices now.

Signature · 3 lines
bill davidsen <[email protected]>
 CTO TMR Associates, Inc
 Doing interesting things with small computers since 1979