s390 patches for 2.6.24

Index: quilt-2.6/drivers/s390/cio/chp.c
===================================================================
@@ -55,7 +55,7 @@ static wait_queue_head_t cfg_wait_queue;
 /* Return channel_path struct for given chpid. */
 static inline struct channel_path *chpid_to_chp(struct chp_id chpid)
 {
-	return css[chpid.cssid]->chps[chpid.id];
+	return channel_subsystems[chpid.cssid]->chps[chpid.id];
 }
 
 /* Set vary state for given chpid. */

@@ -395,7 +395,7 @@ int chp_new(struct chp_id chpid)
 	/* fill in status, etc. */
 	chp->chpid = chpid;
 	chp->state = 1;
-	chp->dev.parent = &css[chpid.cssid]->device;
+	chp->dev.parent = &channel_subsystems[chpid.cssid]->device;
 	chp->dev.release = chp_release;
 	snprintf(chp->dev.bus_id, BUS_ID_SIZE, "chp%x.%02x", chpid.cssid,
 		 chpid.id);

@@ -430,18 +430,18 @@ int chp_new(struct chp_id chpid)
 		device_unregister(&chp->dev);
 		goto out_free;
 	}
-	mutex_lock(&css[chpid.cssid]->mutex);
-	if (css[chpid.cssid]->cm_enabled) {
+	mutex_lock(&channel_subsystems[chpid.cssid]->mutex);
+	if (channel_subsystems[chpid.cssid]->cm_enabled) {
 		ret = chp_add_cmg_attr(chp);
 		if (ret) {
 			sysfs_remove_group(&chp->dev.kobj, &chp_attr_group);
 			device_unregister(&chp->dev);
-			mutex_unlock(&css[chpid.cssid]->mutex);
+			mutex_unlock(&channel_subsystems[chpid.cssid]->mutex);
 			goto out_free;
 		}
 	}
-	css[chpid.cssid]->chps[chpid.id] = chp;
-	mutex_unlock(&css[chpid.cssid]->mutex);
+	channel_subsystems[chpid.cssid]->chps[chpid.id] = chp;
+	mutex_unlock(&channel_subsystems[chpid.cssid]->mutex);
 	return ret;
 out_free:
 	kfree(chp);

127 lines not on this page · raw message

Index: quilt-2.6/drivers/s390/cio/css.h
===================================================================
@@ -167,7 +167,7 @@ struct channel_subsystem {
 #define to_css(dev) container_of(dev, struct channel_subsystem, device)
 
 extern struct bus_type css_bus_type;
-extern struct channel_subsystem *css[];
+extern struct channel_subsystem *channel_subsystems[];
 
 /* Some helper functions for disconnected state. */
 int device_is_disconnected(struct subchannel *);

Index: quilt-2.6/drivers/s390/cio/device_fsm.c
===================================================================
@@ -446,7 +446,8 @@ static void __ccw_device_get_common_pgid
 	if (cdev->private->pgid[last].inf.ps.state1 ==
 	    SNID_STATE1_RESET)
 		/* No previous pgid found */
-		memcpy(&cdev->private->pgid[0], &css[0]->global_pgid,
+		memcpy(&cdev->private->pgid[0],
+		       &channel_subsystems[0]->global_pgid,
 		       sizeof(struct pgid));
 	else
 		/* Use existing pgid */

Index: quilt-2.6/drivers/s390/cio/css.h
===================================================================
@@ -191,6 +191,5 @@ int sch_is_pseudo_sch(struct subchannel 
 
 extern struct workqueue_struct *slow_path_wq;
 
-int subchannel_add_files (struct device *);
 extern struct attribute_group *subch_attr_groups[];
 #endif

Index: quilt-2.6/drivers/s390/cio/cmf.c
===================================================================
@@ -45,7 +45,8 @@
 #include "ioasm.h"
 #include "chsc.h"
 
-/* parameter to enable cmf during boot, possible uses are:
+/*
+ * parameter to enable cmf during boot, possible uses are:
  *  "s390cmf" -- enable cmf and allocate 2 MB of ram so measuring can be
  *               used on any subchannel
  *  "s390cmf=<num>" -- enable cmf and allocate enough memory to measure

@@ -84,6 +85,7 @@ enum cmb_format {
 	CMF_EXTENDED,
 	CMF_AUTODETECT = -1,
 };
+
 /**
  * format - actual format for all measurement blocks
  *

@@ -111,13 +113,13 @@ module_param(format, bool, 0444);
  * @align:	align an allocated block so that the hardware can use it
  */
 struct cmb_operations {
-	int (*alloc)  (struct ccw_device*);
-	void(*free)   (struct ccw_device*);
-	int (*set)    (struct ccw_device*, u32);
-	u64 (*read)   (struct ccw_device*, int);
-	int (*readall)(struct ccw_device*, struct cmbdata *);
-	void (*reset) (struct ccw_device*);
-	void * (*align) (void *);
+	int  (*alloc)  (struct ccw_device *);
+	void (*free)   (struct ccw_device *);
+	int  (*set)    (struct ccw_device *, u32);
+	u64  (*read)   (struct ccw_device *, int);
+	int  (*readall)(struct ccw_device *, struct cmbdata *);
+	void (*reset)  (struct ccw_device *);
+	void *(*align) (void *);
 
 	struct attribute_group *attr_group;
 };

@@ -130,9 +132,11 @@ struct cmb_data {
 	unsigned long long last_update;  /* when last_block was updated */
 };
 
-/* our user interface is designed in terms of nanoseconds,
+/*
+ * Our user interface is designed in terms of nanoseconds,
  * while the hardware measures total times in its own
- * unit.*/
+ * unit.
+ */
 static inline u64 time_to_nsec(u32 value)
 {
 	return ((u64)value) * 128000ull;

@@ -159,12 +163,13 @@ static inline u64 time_to_avg_nsec(u32 v
 	return ret;
 }
 
-/* activate or deactivate the channel monitor. When area is NULL,
+/*
+ * Activate or deactivate the channel monitor. When area is NULL,
  * the monitor is deactivated. The channel monitor needs to
  * be active in order to measure subchannels, which also need
- * to be enabled. */
-static inline void
-cmf_activate(void *area, unsigned int onoff)
+ * to be enabled.
+ */
+static inline void cmf_activate(void *area, unsigned int onoff)
 {
 	register void * __gpr2 asm("2");
 	register long __gpr1 asm("1");

@@ -175,8 +180,8 @@ cmf_activate(void *area, unsigned int on
 	asm("schm" : : "d" (__gpr2), "d" (__gpr1) );
 }
 
-static int
-set_schib(struct ccw_device *cdev, u32 mme, int mbfc, unsigned long address)
+static int set_schib(struct ccw_device *cdev, u32 mme, int mbfc,
+		     unsigned long address)
 {
 	int ret;
 	int retry;

@@ -484,15 +489,14 @@ static struct cmb_area cmb_area = {
 
 /* ****** old style CMB handling ********/
 
-/** int maxchannels
- *
+/*
  * Basic channel measurement blocks are allocated in one contiguous
  * block of memory, which can not be moved as long as any channel
  * is active. Therefore, a maximum number of subchannels needs to
  * be defined somewhere. This is a module parameter, defaulting to
  * a resonable value of 1024, or 32 kb of memory.
  * Current kernels don't allow kmalloc with more than 128kb, so the
- * maximum is 4096
+ * maximum is 4096.
  */
 
 module_param_named(maxchannels, cmb_area.num_channels, uint, 0444);

@@ -516,8 +520,9 @@ struct cmb {
 	u32 reserved[2];
 };
 
-/* insert a single device into the cmb_area list
- * called with cmb_area.lock held from alloc_cmb
+/*
+ * Insert a single device into the cmb_area list.
+ * Called with cmb_area.lock held from alloc_cmb.
  */
 static int alloc_cmb_single(struct ccw_device *cdev,
 			    struct cmb_data *cmb_data)

@@ -532,9 +537,11 @@ static int alloc_cmb_single(struct ccw_d
 		goto out;
 	}
 
-	/* find first unused cmb in cmb_area.mem.
-	 * this is a little tricky: cmb_area.list
-	 * remains sorted by ->cmb->hw_data pointers */
+	/*
+	 * Find first unused cmb in cmb_area.mem.
+	 * This is a little tricky: cmb_area.list
+	 * remains sorted by ->cmb->hw_data pointers.
+	 */
 	cmb = cmb_area.mem;
 	list_for_each_entry(node, &cmb_area.list, cmb_list) {
 		struct cmb_data *data;

@@ -558,8 +565,7 @@ out:
 	return ret;
 }
 
-static int
-alloc_cmb (struct ccw_device *cdev)
+static int alloc_cmb(struct ccw_device *cdev)
 {
 	int ret;
 	struct cmb *mem;

@@ -670,7 +676,7 @@ static int set_cmb(struct ccw_device *cd
 	return set_schib_wait(cdev, mme, 0, offset);
 }
 
-static u64 read_cmb (struct ccw_device *cdev, int index)
+static u64 read_cmb(struct ccw_device *cdev, int index)
 {
 	struct cmb *cmb;
 	u32 val;

@@ -720,7 +726,7 @@ out:
 	return ret;
 }
 
-static int readall_cmb (struct ccw_device *cdev, struct cmbdata *data)
+static int readall_cmb(struct ccw_device *cdev, struct cmbdata *data)
 {
 	struct cmb *cmb;
 	struct cmb_data *cmb_data;

@@ -816,10 +822,12 @@ struct cmbe {
 	u32 reserved[7];
 };
 
-/* kmalloc only guarantees 8 byte alignment, but we need cmbe
+/*
+ * kmalloc only guarantees 8 byte alignment, but we need cmbe
  * pointers to be naturally aligned. Make sure to allocate
- * enough space for two cmbes */
-static inline struct cmbe* cmbe_align(struct cmbe *c)
+ * enough space for two cmbes.
+ */
+static inline struct cmbe *cmbe_align(struct cmbe *c)
 {
 	unsigned long addr;
 	addr = ((unsigned long)c + sizeof (struct cmbe) - sizeof(long)) &

@@ -827,7 +835,7 @@ static inline struct cmbe* cmbe_align(st
 	return (struct cmbe*)addr;
 }
 
-static int alloc_cmbe (struct ccw_device *cdev)
+static int alloc_cmbe(struct ccw_device *cdev)
 {
 	struct cmbe *cmbe;
 	struct cmb_data *cmb_data;

@@ -873,7 +881,7 @@ out_free:
 	return ret;
 }
 
-static void free_cmbe (struct ccw_device *cdev)
+static void free_cmbe(struct ccw_device *cdev)
 {
 	struct cmb_data *cmb_data;
 

@@ -912,7 +920,7 @@ static int set_cmbe(struct ccw_device *c
 }
 
 
-static u64 read_cmbe (struct ccw_device *cdev, int index)
+static u64 read_cmbe(struct ccw_device *cdev, int index)
 {
 	struct cmbe *cmb;
 	struct cmb_data *cmb_data;

@@ -970,7 +978,7 @@ out:
 	return ret;
 }
 
-static int readall_cmbe (struct ccw_device *cdev, struct cmbdata *data)
+static int readall_cmbe(struct ccw_device *cdev, struct cmbdata *data)
 {
 	struct cmbe *cmb;
 	struct cmb_data *cmb_data;

@@ -1049,15 +1057,15 @@ static struct cmb_operations cmbops_exte
 };
 
 
-static ssize_t
-cmb_show_attr(struct device *dev, char *buf, enum cmb_index idx)
+static ssize_t cmb_show_attr(struct device *dev, char *buf, enum cmb_index idx)
 {
 	return sprintf(buf, "%lld\n",
 		(unsigned long long) cmf_read(to_ccwdev(dev), idx));
 }
 
-static ssize_t
-cmb_show_avg_sample_interval(struct device *dev, struct device_attribute *attr, char *buf)
+static ssize_t cmb_show_avg_sample_interval(struct device *dev,
+					    struct device_attribute *attr,
+					    char *buf)
 {
 	struct ccw_device *cdev;
 	long interval;

@@ -1079,8 +1087,9 @@ cmb_show_avg_sample_interval(struct devi
 	return sprintf(buf, "%ld\n", interval);
 }
 
-static ssize_t
-cmb_show_avg_utilization(struct device *dev, struct device_attribute *attr, char *buf)
+static ssize_t cmb_show_avg_utilization(struct device *dev,
+					struct device_attribute *attr,
+					char *buf)
 {
 	struct cmbdata data;
 	u64 utilization;

@@ -1112,14 +1121,16 @@ cmb_show_avg_utilization(struct device *
 }
 
 #define cmf_attr(name) \
-static ssize_t show_ ## name (struct device * dev, struct device_attribute *attr, char * buf) \
-{ return cmb_show_attr((dev), buf, cmb_ ## name); } \
-static DEVICE_ATTR(name, 0444, show_ ## name, NULL);
+static ssize_t show_##name(struct device *dev, \
+			   struct device_attribute *attr, char *buf)	\
+{ return cmb_show_attr((dev), buf, cmb_##name); } \
+static DEVICE_ATTR(name, 0444, show_##name, NULL);
 
 #define cmf_attr_avg(name) \
-static ssize_t show_avg_ ## name (struct device * dev, struct device_attribute *attr, char * buf) \
-{ return cmb_show_attr((dev), buf, cmb_ ## name); } \
-static DEVICE_ATTR(avg_ ## name, 0444, show_avg_ ## name, NULL);
+static ssize_t show_avg_##name(struct device *dev, \
+			       struct device_attribute *attr, char *buf) \
+{ return cmb_show_attr((dev), buf, cmb_##name); } \
+static DEVICE_ATTR(avg_##name, 0444, show_avg_##name, NULL);
 
 cmf_attr(ssch_rsch_count);
 cmf_attr(sample_count);

@@ -1131,7 +1142,8 @@ cmf_attr_avg(device_active_only_time);
 cmf_attr_avg(device_busy_time);
 cmf_attr_avg(initial_command_response_time);
 
-static DEVICE_ATTR(avg_sample_interval, 0444, cmb_show_avg_sample_interval, NULL);
+static DEVICE_ATTR(avg_sample_interval, 0444, cmb_show_avg_sample_interval,
+		   NULL);
 static DEVICE_ATTR(avg_utilization, 0444, cmb_show_avg_utilization, NULL);
 
 static struct attribute *cmf_attributes[] = {

@@ -1172,12 +1184,16 @@ static struct attribute_group cmf_attr_g
 	.attrs = cmf_attributes_ext,
 };
 
-static ssize_t cmb_enable_show(struct device *dev, struct device_attribute *attr, char *buf)
+static ssize_t cmb_enable_show(struct device *dev,
+			       struct device_attribute *attr,
+			       char *buf)
 {
 	return sprintf(buf, "%d\n", to_ccwdev(dev)->private->cmb ? 1 : 0);
 }
 
-static ssize_t cmb_enable_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t c)
+static ssize_t cmb_enable_store(struct device *dev,
+				struct device_attribute *attr, const char *buf,
+				size_t c)
 {
 	struct ccw_device *cdev;
 	int ret;

@@ -1203,8 +1219,7 @@ static ssize_t cmb_enable_store(struct d
 DEVICE_ATTR(cmb_enable, 0644, cmb_enable_show, cmb_enable_store);
 
 /* enable_cmf/disable_cmf: module interface for cmf (de)activation */
-int
-enable_cmf(struct ccw_device *cdev)
+int enable_cmf(struct ccw_device *cdev)
 {
 	int ret;
 

@@ -1225,8 +1240,7 @@ enable_cmf(struct ccw_device *cdev)
 	return ret;
 }
 
-int
-disable_cmf(struct ccw_device *cdev)
+int disable_cmf(struct ccw_device *cdev)
 {
 	int ret;
 

@@ -1238,14 +1252,12 @@ disable_cmf(struct ccw_device *cdev)
 	return ret;
 }
 
-u64
-cmf_read(struct ccw_device *cdev, int index)
+u64 cmf_read(struct ccw_device *cdev, int index)
 {
 	return cmbops->read(cdev, index);
 }
 
-int
-cmf_readall(struct ccw_device *cdev, struct cmbdata *data)
+int cmf_readall(struct ccw_device *cdev, struct cmbdata *data)
 {
 	return cmbops->readall(cdev, data);
 }

@@ -1257,15 +1269,16 @@ int cmf_reenable(struct ccw_device *cdev
 	return cmbops->set(cdev, 2);
 }
 
-static int __init
-init_cmf(void)
+static int __init init_cmf(void)
 {
 	char *format_string;
 	char *detect_string = "parameter";
 
-	/* We cannot really autoprobe this. If the user did not give a parameter,
-	   see if we are running on z990 or up, otherwise fall back to basic mode. */
-
+	/*
+	 * If the user did not give a parameter, see if we are running on a
+	 * machine supporting extended measurement blocks, otherwise fall back
+	 * to basic mode.
+	 */
 	if (format == CMF_AUTODETECT) {
 		if (!css_characteristics_avail ||
 		    !css_general_characteristics.ext_mb) {

@@ -1284,7 +1297,7 @@ init_cmf(void)
 		cmbops = &cmbops_basic;
 		break;
 	case CMF_EXTENDED:
- 		format_string = "extended";
+		format_string = "extended";
 		cmbops = &cmbops_extended;
 		break;
 	default:

Index: quilt-2.6/include/asm-s390/cmb.h
===================================================================
@@ -41,11 +41,11 @@ struct cmbdata {
 };
 
 /* enable channel measurement */
-#define BIODASDCMFENABLE	_IO(DASD_IOCTL_LETTER,32)
+#define BIODASDCMFENABLE	_IO(DASD_IOCTL_LETTER, 32)
 /* enable channel measurement */
-#define BIODASDCMFDISABLE	_IO(DASD_IOCTL_LETTER,33)
+#define BIODASDCMFDISABLE	_IO(DASD_IOCTL_LETTER, 33)
 /* read channel measurement data */
-#define BIODASDREADALLCMB	_IOWR(DASD_IOCTL_LETTER,33,struct cmbdata)
+#define BIODASDREADALLCMB	_IOWR(DASD_IOCTL_LETTER, 33, struct cmbdata)
 
 #ifdef __KERNEL__
 struct ccw_device;

@@ -87,7 +87,7 @@ extern u64 cmf_read(struct ccw_device *c
  *  Context:
  *    any
  **/
-extern int cmf_readall(struct ccw_device *cdev, struct cmbdata*data);
+extern int cmf_readall(struct ccw_device *cdev, struct cmbdata *data);
 
 #endif /* __KERNEL__ */
 #endif /* S390_CMB_H */

Index: quilt-2.6/drivers/s390/cio/cmf.c
===================================================================
@@ -74,19 +74,20 @@ enum cmb_index {
  * enum cmb_format - types of supported measurement block formats
  *
  * @CMF_BASIC:      traditional channel measurement blocks supported
- * 		    by all machines that we run on
+ *		    by all machines that we run on
  * @CMF_EXTENDED:   improved format that was introduced with the z990
- * 		    machine
- * @CMF_AUTODETECT: default: use extended format when running on a z990
- *                  or later machine, otherwise fall back to basic format
- **/
+ *		    machine
+ * @CMF_AUTODETECT: default: use extended format when running on a machine
+ *		    supporting extended format, otherwise fall back to
+ *		    basic format
+ */
 enum cmb_format {
 	CMF_BASIC,
 	CMF_EXTENDED,
 	CMF_AUTODETECT = -1,
 };
 
-/**
+/*
  * format - actual format for all measurement blocks
  *
  * The format module parameter can be set to a value of 0 (zero)

@@ -107,6 +108,7 @@ module_param(format, bool, 0444);
  *		either with the help of a special pool or with kmalloc
  * @free:	free memory allocated with @alloc
  * @set:	enable or disable measurement
+ * @read:	read a measurement entry at an index
  * @readall:	read a measurement block in a common format
  * @reset:	clear the data in the associated measurement block and
  *		reset its time stamp

@@ -120,7 +122,7 @@ struct cmb_operations {
 	int  (*readall)(struct ccw_device *, struct cmbdata *);
 	void (*reset)  (struct ccw_device *);
 	void *(*align) (void *);
-
+/* private: */
 	struct attribute_group *attr_group;
 };
 static struct cmb_operations *cmbops;

@@ -471,6 +473,7 @@ static void cmf_generic_reset(struct ccw
  *
  * @mem:	pointer to CMBs (only in basic measurement mode)
  * @list:	contains a linked list of all subchannels
+ * @num_channels: number of channels to be measured
  * @lock:	protect concurrent access to @mem and @list
  */
 struct cmb_area {

@@ -503,10 +506,20 @@ module_param_named(maxchannels, cmb_area
 
 /**
  * struct cmb - basic channel measurement block
+ * @ssch_rsch_count: number of ssch and rsch
+ * @sample_count: number of samples
+ * @device_connect_time: time of device connect
+ * @function_pending_time: time of function pending
+ * @device_disconnect_time: time of device disconnect
+ * @control_unit_queuing_time: time of control unit queuing
+ * @device_active_only_time: time of device active only
+ * @reserved: unused in basic measurement mode
+ *
+ * The measurement block as used by the hardware. The fields are described
+ * further in z/Architecture Principles of Operation, chapter 17.
  *
- * cmb as used by the hardware the fields are described in z/Architecture
- * Principles of Operation, chapter 17.
- * The area to be a contiguous array and may not be reallocated or freed.
+ * The cmb area made up from these blocks must be a contiguous array and may
+ * not be reallocated or freed.
  * Only one cmb area can be present in the system.
  */
 struct cmb {

@@ -804,9 +817,20 @@ static struct cmb_operations cmbops_basi
 
 /**
  * struct cmbe - extended channel measurement block
+ * @ssch_rsch_count: number of ssch and rsch
+ * @sample_count: number of samples
+ * @device_connect_time: time of device connect
+ * @function_pending_time: time of function pending
+ * @device_disconnect_time: time of device disconnect
+ * @control_unit_queuing_time: time of control unit queuing
+ * @device_active_only_time: time of device active only
+ * @device_busy_time: time of device busy
+ * @initial_command_response_time: initial command response time
+ * @reserved: unused
  *
- * cmb as used by the hardware, may be in any 64 bit physical location,
- * the fields are described in z/Architecture Principles of Operation,
+ * The measurement block as used by the hardware. May be in any 64 bit physical
+ * location.
+ * The fields are described further in z/Architecture Principles of Operation,
  * third edition, chapter 17.
  */
 struct cmbe {

@@ -1218,7 +1242,15 @@ static ssize_t cmb_enable_store(struct d
 
 DEVICE_ATTR(cmb_enable, 0644, cmb_enable_show, cmb_enable_store);
 
-/* enable_cmf/disable_cmf: module interface for cmf (de)activation */
+/**
+ * enable_cmf() - switch on the channel measurement for a specific device
+ *  @cdev:	The ccw device to be enabled
+ *
+ *  Returns %0 for success or a negative error value.
+ *
+ *  Context:
+ *    non-atomic
+ */
 int enable_cmf(struct ccw_device *cdev)
 {
 	int ret;

@@ -1240,6 +1272,15 @@ int enable_cmf(struct ccw_device *cdev)
 	return ret;
 }
 
+/**
+ * disable_cmf() - switch off the channel measurement for a specific device
+ *  @cdev:	The ccw device to be disabled
+ *
+ *  Returns %0 for success or a negative error value.
+ *
+ *  Context:
+ *    non-atomic
+ */
 int disable_cmf(struct ccw_device *cdev)
 {
 	int ret;

@@ -1252,11 +1293,31 @@ int disable_cmf(struct ccw_device *cdev)
 	return ret;
 }
 
+/**
+ * cmf_read() - read one value from the current channel measurement block
+ * @cdev:	the channel to be read
+ * @index:	the index of the value to be read
+ *
+ * Returns the value read or %0 if the value cannot be read.
+ *
+ *  Context:
+ *    any
+ */
 u64 cmf_read(struct ccw_device *cdev, int index)
 {
 	return cmbops->read(cdev, index);
 }
 
+/**
+ * cmf_readall() - read the current channel measurement block
+ * @cdev:	the channel to be read
+ * @data:	a pointer to a data block that will be filled
+ *
+ * Returns %0 on success, a negative error value otherwise.
+ *
+ *  Context:
+ *    any
+ */
 int cmf_readall(struct ccw_device *cdev, struct cmbdata *data)
 {
 	return cmbops->readall(cdev, data);

88 lines not on this page · raw message

Index: quilt-2.6/drivers/s390/cio/ccwgroup.c
===================================================================
@@ -152,16 +152,24 @@ __ccwgroup_create_symlinks(struct ccwgro
 	return 0;
 }
 
-/*
- * try to add a new ccwgroup device for one driver
- * argc and argv[] are a list of bus_id's of devices
- * belonging to the driver.
+/**
+ * ccwgroup_create() - create and register a ccw group device
+ * @root: parent device for the new device
+ * @creator_id: identifier of creating driver
+ * @cdrv: ccw driver of slave devices
+ * @argc: number of slave devices
+ * @argv: bus ids of slave devices
+ *
+ * Create and register a new ccw group device as a child of @root. Slave
+ * devices are obtained from the list of bus ids given in @argv[] and must all
+ * belong to @cdrv.
+ * Returns:
+ *  %0 on success and an error code on failure.
+ * Context:
+ *  non-atomic
  */
-int
-ccwgroup_create(struct device *root,
-		unsigned int creator_id,
-		struct ccw_driver *cdrv,
-		int argc, char *argv[])
+int ccwgroup_create(struct device *root, unsigned int creator_id,
+		    struct ccw_driver *cdrv, int argc, char *argv[])
 {
 	struct ccwgroup_device *gdev;
 	int i;

@@ -390,8 +398,13 @@ static struct bus_type ccwgroup_bus_type
 	.remove = ccwgroup_remove,
 };
 
-int
-ccwgroup_driver_register (struct ccwgroup_driver *cdriver)
+/**
+ * ccwgroup_driver_register() - register a ccw group driver
+ * @cdriver: driver to be registered
+ *
+ * This function is mainly a wrapper around driver_register().
+ */
+int ccwgroup_driver_register(struct ccwgroup_driver *cdriver)
 {
 	/* register our new driver with the core */
 	cdriver->driver.bus = &ccwgroup_bus_type;

@@ -406,8 +419,13 @@ __ccwgroup_match_all(struct device *dev,
 	return 1;
 }
 
-void
-ccwgroup_driver_unregister (struct ccwgroup_driver *cdriver)
+/**
+ * ccwgroup_driver_unregister() - deregister a ccw group driver
+ * @cdriver: driver to be deregistered
+ *
+ * This function is mainly a wrapper around driver_unregister().
+ */
+void ccwgroup_driver_unregister(struct ccwgroup_driver *cdriver)
 {
 	struct device *dev;
 

@@ -427,8 +445,16 @@ ccwgroup_driver_unregister (struct ccwgr
 	driver_unregister(&cdriver->driver);
 }
 
-int
-ccwgroup_probe_ccwdev(struct ccw_device *cdev)
+/**
+ * ccwgroup_probe_ccwdev() - probe function for slave devices
+ * @cdev: ccw device to be probed
+ *
+ * This is a dummy probe function for ccw devices that are slave devices in
+ * a ccw group device.
+ * Returns:
+ *  always %0
+ */
+int ccwgroup_probe_ccwdev(struct ccw_device *cdev)
 {
 	return 0;
 }

@@ -452,8 +478,15 @@ __ccwgroup_get_gdev_by_cdev(struct ccw_d
 	return NULL;
 }
 
-void
-ccwgroup_remove_ccwdev(struct ccw_device *cdev)
+/**
+ * ccwgroup_remove_ccwdev() - remove function for slave devices
+ * @cdev: ccw device to be removed
+ *
+ * This is a remove function for ccw devices that are slave devices in a ccw
+ * group device. It sets the ccw device offline and also deregisters the
+ * embedding ccw group device.
+ */
+void ccwgroup_remove_ccwdev(struct ccw_device *cdev)
 {
 	struct ccwgroup_device *gdev;
 

94 lines not on this page · raw message

319 lines not on this page · raw message

105 lines not on this page · raw message

Index: quilt-2.6/include/asm-s390/ccwgroup.h
===================================================================
@@ -4,19 +4,41 @@
 struct ccw_device;
 struct ccw_driver;
 
+/**
+ * struct ccwgroup_device - ccw group device
+ * @creator_id: unique number of the driver
+ * @state: online/offline state
+ * @count: number of attached slave devices
+ * @dev: embedded device structure
+ * @cdev: variable number of slave devices, allocated as needed
+ */
 struct ccwgroup_device {
-	unsigned long creator_id;	/* unique number of the driver */
+	unsigned long creator_id;
 	enum {
 		CCWGROUP_OFFLINE,
 		CCWGROUP_ONLINE,
 	} state;
+/* private: */
 	atomic_t onoff;
 	struct mutex reg_mutex;
-	unsigned int count;		/* number of attached slave devices */
-	struct device	dev;		/* master device		    */
-	struct ccw_device *cdev[0];	/* variable number, allocate as needed */
+/* public: */
+	unsigned int count;
+	struct device	dev;
+	struct ccw_device *cdev[0];
 };
 
+/**
+ * struct ccwgroup_driver - driver for ccw group devices
+ * @owner: driver owner
+ * @name: driver name
+ * @max_slaves: maximum number of slave devices
+ * @driver_id: unique id
+ * @probe: function called on probe
+ * @remove: function called on remove
+ * @set_online: function called when device is set online
+ * @set_offline: function called when device is set offline
+ * @driver: embedded driver structure
+ */
 struct ccwgroup_driver {
 	struct module *owner;
 	char *name;

@@ -28,7 +50,7 @@ struct ccwgroup_driver {
 	int (*set_online) (struct ccwgroup_device *);
 	int (*set_offline) (struct ccwgroup_device *);
 
-	struct device_driver driver;		/* this driver */
+	struct device_driver driver;
 };
 
 extern int  ccwgroup_driver_register   (struct ccwgroup_driver *cdriver);

354 lines not on this page · raw message

Index: quilt-2.6/drivers/s390/cio/chp.c
===================================================================
@@ -14,7 +14,7 @@
 #include <linux/jiffies.h>
 #include <linux/wait.h>
 #include <linux/mutex.h>
-#include <asm/errno.h>
+#include <linux/errno.h>
 #include <asm/chpid.h>
 #include <asm/sclp.h>
 

@@ -86,7 +86,7 @@ u8 chp_get_sch_opm(struct subchannel *sc
 
 	opm = 0;
 	chp_id_init(&chpid);
-	for (i=0; i < 8; i++) {
+	for (i = 0; i < 8; i++) {
 		opm <<= 1;
 		chpid.id = sch->schib.pmcw.chpid[i];
 		if (chp_get_status(chpid) != 0)

@@ -118,7 +118,7 @@ static int s390_vary_chpid(struct chp_id
 
 	sprintf(dbf_text, on?"varyon%x.%02x":"varyoff%x.%02x", chpid.cssid,
 		chpid.id);
-	CIO_TRACE_EVENT( 2, dbf_text);
+	CIO_TRACE_EVENT(2, dbf_text);
 
 	status = chp_get_status(chpid);
 	if (!on && !status) {

@@ -353,7 +353,7 @@ static ssize_t chp_shared_show(struct de
 
 static DEVICE_ATTR(shared, 0444, chp_shared_show, NULL);
 
-static struct attribute * chp_attrs[] = {
+static struct attribute *chp_attrs[] = {
 	&dev_attr_status.attr,
 	&dev_attr_configure.attr,
 	&dev_attr_type.attr,

Index: quilt-2.6/drivers/s390/cio/css.c
===================================================================
@@ -13,6 +13,7 @@
 #include <linux/slab.h>
 #include <linux/errno.h>
 #include <linux/list.h>
+#include <linux/reboot.h>
 
 #include "css.h"
 #include "cio.h"

@@ -632,6 +633,29 @@ static int __init setup_css(int nr)
 	return 0;
 }
 
+static int css_reboot_event(struct notifier_block *this,
+			    unsigned long event,
+			    void *ptr)
+{
+	int ret, i;
+
+	ret = NOTIFY_DONE;
+	for (i = 0; i <= __MAX_CSSID; i++) {
+		struct channel_subsystem *css;
+
+		css = channel_subsystems[i];
+		if (css->cm_enabled)
+			if (chsc_secm(css, 0))
+				ret = NOTIFY_BAD;
+	}
+
+	return ret;
+}
+
+static struct notifier_block css_reboot_notifier = {
+	.notifier_call = css_reboot_event,
+};
+
 /*
  * Now that the driver core is running, we can setup our channel subsystem.
  * The struct subchannel's are created during probing (except for the

@@ -697,12 +721,17 @@ init_channel_subsystem (void)
 		if (ret)
 			goto out_file;
 	}
+	ret = register_reboot_notifier(&css_reboot_notifier);
+	if (ret)
+		goto out_pseudo;
 	css_init_done = 1;
 
 	ctl_set_bit(6, 28);
 
 	for_each_subchannel(__init_channel_subsystem, NULL);
 	return 0;
+out_pseudo:
+	device_unregister(&channel_subsystems[i]->pseudo_subchannel->dev);
 out_file:
 	device_remove_file(&channel_subsystems[i]->device,
 			   &dev_attr_cm_enable);

Index: quilt-2.6/drivers/s390/cio/device.c
===================================================================
@@ -1433,12 +1433,22 @@ ccw_device_remove (struct device *dev)
 	return 0;
 }
 
+static void ccw_device_shutdown(struct device *dev)
+{
+	struct ccw_device *cdev;
+
+	cdev = to_ccwdev(dev);
+	if (cdev->drv && cdev->drv->shutdown)
+		cdev->drv->shutdown(cdev);
+}
+
 struct bus_type ccw_bus_type = {
 	.name   = "ccw",
 	.match  = ccw_bus_match,
 	.uevent = ccw_uevent,
 	.probe  = ccw_device_probe,
 	.remove = ccw_device_remove,
+	.shutdown = ccw_device_shutdown,
 };
 
 /**

Index: quilt-2.6/drivers/s390/scsi/zfcp_ccw.c
===================================================================
@@ -28,7 +28,7 @@ static void zfcp_ccw_remove(struct ccw_d
 static int zfcp_ccw_set_online(struct ccw_device *);
 static int zfcp_ccw_set_offline(struct ccw_device *);
 static int zfcp_ccw_notify(struct ccw_device *, int);
-static void zfcp_ccw_shutdown(struct device *);
+static void zfcp_ccw_shutdown(struct ccw_device *);
 
 static struct ccw_device_id zfcp_ccw_device_id[] = {
 	{CCW_DEVICE_DEVTYPE(ZFCP_CONTROL_UNIT_TYPE,

@@ -51,9 +51,7 @@ static struct ccw_driver zfcp_ccw_driver
 	.set_online  = zfcp_ccw_set_online,
 	.set_offline = zfcp_ccw_set_offline,
 	.notify      = zfcp_ccw_notify,
-	.driver      = {
-		.shutdown = zfcp_ccw_shutdown,
-	},
+	.shutdown    = zfcp_ccw_shutdown,
 };
 
 MODULE_DEVICE_TABLE(ccw, zfcp_ccw_device_id);

@@ -277,12 +275,12 @@ zfcp_ccw_register(void)
  * Makes sure that QDIO queues are down when the system gets stopped.
  */
 static void
-zfcp_ccw_shutdown(struct device *dev)
+zfcp_ccw_shutdown(struct ccw_device *cdev)
 {
 	struct zfcp_adapter *adapter;
 
 	down(&zfcp_data.config_sema);
-	adapter = dev_get_drvdata(dev);
+	adapter = dev_get_drvdata(&cdev->dev);
 	zfcp_erp_adapter_shutdown(adapter, 0);
 	zfcp_erp_wait(adapter);
 	up(&zfcp_data.config_sema);

Index: quilt-2.6/include/asm-s390/ccwdev.h
===================================================================
@@ -102,6 +102,7 @@ struct ccw_device {
  * @set_online: called when setting device online
  * @set_offline: called when setting device offline
  * @notify: notify driver of device state changes
+ * @shutdown: called at device shutdown
  * @driver: embedded device driver structure
  * @name: device driver name
  */

@@ -113,6 +114,7 @@ struct ccw_driver {
 	int (*set_online) (struct ccw_device *);
 	int (*set_offline) (struct ccw_device *);
 	int (*notify) (struct ccw_device *, int);
+	void (*shutdown) (struct ccw_device *);
 	struct device_driver driver;
 	char *name;
 };

Index: quilt-2.6/drivers/s390/cio/cio.c
===================================================================
@@ -619,6 +619,11 @@ cio_validate_subchannel (struct subchann
 	sch->schib.pmcw.ena = 0;
 	if ((sch->lpm & (sch->lpm - 1)) != 0)
 		sch->schib.pmcw.mp = 1;	/* multipath mode */
+	/* clean up possible residual cmf stuff */
+	sch->schib.pmcw.mme = 0;
+	sch->schib.pmcw.mbfc = 0;
+	sch->schib.pmcw.mbi = 0;
+	sch->schib.mba = 0;
 	return 0;
 out:
 	if (!cio_is_console(schid))

Index: quilt-2.6/drivers/s390/cio/device.c
===================================================================
@@ -21,6 +21,7 @@
 #include <asm/ccwdev.h>
 #include <asm/cio.h>
 #include <asm/param.h>		/* HZ */
+#include <asm/cmb.h>
 
 #include "cio.h"
 #include "cio_debug.h"

@@ -1440,6 +1441,7 @@ static void ccw_device_shutdown(struct d
 	cdev = to_ccwdev(dev);
 	if (cdev->drv && cdev->drv->shutdown)
 		cdev->drv->shutdown(cdev);
+	disable_cmf(cdev);
 }
 
 struct bus_type ccw_bus_type = {

Index: quilt-2.6/drivers/s390/cio/device.c
===================================================================
@@ -1123,6 +1123,7 @@ io_subchannel_probe (struct subchannel *
 		 * device, e.g. the console.
 		 */
 		cdev = sch->dev.driver_data;
+		cdev->dev.groups = ccwdev_attr_groups;
 		device_initialize(&cdev->dev);
 		ccw_device_register(cdev);
 		/*

Index: quilt-2.6/drivers/s390/crypto/zcrypt_mono.c
===================================================================
@@ -45,7 +45,7 @@
 /**
  * The module initialization code.
  */
-int __init zcrypt_init(void)
+static int __init zcrypt_init(void)
 {
 	int rc;
 

@@ -86,7 +86,7 @@ out:
 /**
  * The module termination code.
  */
-void __exit zcrypt_exit(void)
+static void __exit zcrypt_exit(void)
 {
 	zcrypt_cex2a_exit();
 	zcrypt_pcixcc_exit();

Index: quilt-2.6/drivers/s390/crypto/zcrypt_pcixcc.c
===================================================================
@@ -277,7 +277,7 @@ static int XCRB_msg_to_type6CPRB_msgX(st
 	};
 	struct {
 		struct type6_hdr hdr;
-		struct ica_CPRBX cprbx;
+		struct CPRBX cprbx;
 	} __attribute__((packed)) *msg = ap_msg->message;
 
 	int rcblen = CEIL4(xcRB->request_control_blk_length);

51 lines not on this page · raw message

Index: quilt-2.6/include/asm-s390/zcrypt.h
===================================================================
@@ -91,7 +91,7 @@ struct ica_rsa_modexpo_crt {
  *	    VUD block
  *	    key block
  */
-struct ica_CPRBX {
+struct CPRBX {
 	unsigned short	cprb_len;	/* CPRB length	      220	 */
 	unsigned char	cprb_ver_id;	/* CPRB version id.   0x02	 */
 	unsigned char	pad_000[3];	/* Alignment pad bytes		 */

@@ -130,7 +130,7 @@ struct ica_CPRBX {
 	unsigned char	cntrl_domain[4];/* Control domain		 */
 	unsigned char	S390enf_mask[4];/* S/390 enforcement mask	 */
 	unsigned char	pad_004[36];	/* reserved			 */
-};
+} __attribute__((packed));
 
 /**
  * xcRB

Index: quilt-2.6/drivers/s390/crypto/ap_bus.c
===================================================================
@@ -1231,8 +1231,9 @@ static void ap_reset_domain(void)
 {
 	int i;
 
-	for (i = 0; i < AP_DEVICES; i++)
-		ap_reset_queue(AP_MKQID(i, ap_domain_index));
+	if (ap_domain_index != -1)
+		for (i = 0; i < AP_DEVICES; i++)
+			ap_reset_queue(AP_MKQID(i, ap_domain_index));
 }
 
 static void ap_reset_all(void)

Index: quilt-2.6/arch/s390/appldata/appldata_base.c
===================================================================
@@ -547,8 +547,7 @@ static void __cpuinit appldata_online_cp
 	spin_unlock(&appldata_timer_lock);
 }
 
-static void
-appldata_offline_cpu(int cpu)
+static void __cpuexit appldata_offline_cpu(int cpu)
 {
 	del_virt_timer(&per_cpu(appldata_timer, cpu));
 	if (atomic_dec_and_test(&appldata_expire_count)) {

@@ -560,9 +559,9 @@ appldata_offline_cpu(int cpu)
 	spin_unlock(&appldata_timer_lock);
 }
 
-static int __cpuinit
-appldata_cpu_notify(struct notifier_block *self,
-		    unsigned long action, void *hcpu)
+static int __cpuinit appldata_cpu_notify(struct notifier_block *self,
+					 unsigned long action,
+					 void *hcpu)
 {
 	switch (action) {
 	case CPU_ONLINE:

@@ -646,6 +645,8 @@ static void __exit appldata_exit(void)
 	}
 	spin_unlock(&appldata_ops_lock);
 
+	unregister_hotcpu_notifier(&appldata_nb);
+
 	for_each_online_cpu(i)
 		appldata_offline_cpu(i);
 

Index: quilt-2.6/arch/s390/appldata/appldata_base.c
===================================================================
@@ -547,7 +547,7 @@ static void __cpuinit appldata_online_cp
 	spin_unlock(&appldata_timer_lock);
 }
 
-static void __cpuexit appldata_offline_cpu(int cpu)
+static void __cpuinit appldata_offline_cpu(int cpu)
 {
 	del_virt_timer(&per_cpu(appldata_timer, cpu));
 	if (atomic_dec_and_test(&appldata_expire_count)) {

@@ -607,65 +607,15 @@ static int __init appldata_init(void)
 	register_hotcpu_notifier(&appldata_nb);
 
 	appldata_sysctl_header = register_sysctl_table(appldata_dir_table);
-#ifdef MODULE
-	appldata_dir_table[0].de->owner = THIS_MODULE;
-	appldata_table[0].de->owner = THIS_MODULE;
-	appldata_table[1].de->owner = THIS_MODULE;
-#endif
 
 	P_DEBUG("Base interface initialized.\n");
 	return 0;
 }
 
-/*
- * appldata_exit()
- *
- * stop timer, unregister /proc entries
- */
-static void __exit appldata_exit(void)
-{
-	struct list_head *lh;
-	struct appldata_ops *ops;
-	int rc, i;
-
-	P_DEBUG("Unloading module ...\n");
-	/*
-	 * ops list should be empty, but just in case something went wrong...
-	 */
-	spin_lock(&appldata_ops_lock);
-	list_for_each(lh, &appldata_ops_list) {
-		ops = list_entry(lh, struct appldata_ops, list);
-		rc = appldata_diag(ops->record_nr, APPLDATA_STOP_REC,
-				(unsigned long) ops->data, ops->size,
-				ops->mod_lvl);
-		if (rc != 0) {
-			P_ERROR("STOP DIAG 0xDC for %s failed, "
-				"return code: %d\n", ops->name, rc);
-		}
-	}
-	spin_unlock(&appldata_ops_lock);
-
-	unregister_hotcpu_notifier(&appldata_nb);
+__initcall(appldata_init);
 
-	for_each_online_cpu(i)
-		appldata_offline_cpu(i);
-
-	appldata_timer_active = 0;
-
-	unregister_sysctl_table(appldata_sysctl_header);
-
-	destroy_workqueue(appldata_wq);
-	P_DEBUG("... module unloaded!\n");
-}
 /**************************** init / exit <END> ******************************/
 
-
-module_init(appldata_init);
-module_exit(appldata_exit);
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Gerald Schaefer");
-MODULE_DESCRIPTION("Linux-VM Monitor Stream, base infrastructure");
-
 EXPORT_SYMBOL_GPL(appldata_register_ops);
 EXPORT_SYMBOL_GPL(appldata_unregister_ops);
 EXPORT_SYMBOL_GPL(appldata_diag);

Index: quilt-2.6/arch/s390/kernel/dis.c
===================================================================
@@ -1162,6 +1162,7 @@ static int print_insn(char *buffer, unsi
 	unsigned int value;
 	char separator;
 	char *ptr;
+	int i;
 
 	ptr = buffer;
 	insn = find_insn(code);

@@ -1169,7 +1170,8 @@ static int print_insn(char *buffer, unsi
 		ptr += sprintf(ptr, "%.5s\t", insn->name);
 		/* Extract the operands. */
 		separator = 0;
-		for (ops = formats[insn->format] + 1; *ops != 0; ops++) {
+		for (ops = formats[insn->format] + 1, i = 0;
+		     *ops != 0 && i < 6; ops++, i++) {
 			operand = operands + *ops;
 			value = extract_operand(code, operand);
 			if ((operand->flags & OPERAND_INDEX)  && value == 0)

Index: quilt-2.6/arch/s390/kernel/dis.c
===================================================================
@@ -1243,7 +1243,6 @@ void show_code(struct pt_regs *regs)
 	}
 	/* Find a starting point for the disassembly. */
 	while (start < 32) {
-		hops = 0;
 		for (i = 0, hops = 0; start + i < 32 && hops < 3; hops++) {
 			if (!find_insn(code + start + i))
 				break;

Index: quilt-2.6/arch/s390/kernel/audit.c
===================================================================
@@ -2,6 +2,7 @@
 #include <linux/types.h>
 #include <linux/audit.h>
 #include <asm/unistd.h>
+#include "audit.h"
 
 static unsigned dir_class[] = {
 #include <asm-generic/audit_dir_write.h>

@@ -40,7 +41,6 @@ int audit_classify_arch(int arch)
 int audit_classify_syscall(int abi, unsigned syscall)
 {
 #ifdef CONFIG_COMPAT
-	extern int s390_classify_syscall(unsigned);
 	if (abi == AUDIT_ARCH_S390)
 		return s390_classify_syscall(syscall);
 #endif

@@ -61,11 +61,6 @@ int audit_classify_syscall(int abi, unsi
 static int __init audit_classes_init(void)
 {
 #ifdef CONFIG_COMPAT
-	extern __u32 s390_dir_class[];
-	extern __u32 s390_write_class[];
-	extern __u32 s390_read_class[];
-	extern __u32 s390_chattr_class[];
-	extern __u32 s390_signal_class[];
 	audit_register_class(AUDIT_CLASS_WRITE_32, s390_write_class);
 	audit_register_class(AUDIT_CLASS_READ_32, s390_read_class);
 	audit_register_class(AUDIT_CLASS_DIR_WRITE_32, s390_dir_class);

Index: quilt-2.6/arch/s390/kernel/audit.h
===================================================================
@@ -0,0 +1,15 @@
+#ifndef __ARCH_S390_KERNEL_AUDIT_H
+#define __ARCH_S390_KERNEL_AUDIT_H
+
+#include <linux/types.h>
+
+#ifdef CONFIG_COMPAT
+extern int s390_classify_syscall(unsigned);
+extern __u32 s390_dir_class[];
+extern __u32 s390_write_class[];
+extern __u32 s390_read_class[];
+extern __u32 s390_chattr_class[];
+extern __u32 s390_signal_class[];
+#endif /* CONFIG_COMPAT */
+
+#endif /* __ARCH_S390_KERNEL_AUDIT_H */

Index: quilt-2.6/arch/s390/kernel/compat_audit.c
===================================================================
@@ -1,5 +1,6 @@
 #undef __s390x__
 #include <asm/unistd.h>
+#include "audit.h"
 
 unsigned s390_dir_class[] = {
 #include <asm-generic/audit_dir_write.h>

Index: quilt-2.6/drivers/s390/char/con3270.c
===================================================================
@@ -22,6 +22,7 @@
 #include <asm/ebcdic.h>
 
 #include "raw3270.h"
+#include "tty3270.h"
 #include "ctrlchar.h"
 
 #define CON3270_OUTPUT_BUFFER_SIZE 1024

@@ -507,8 +508,6 @@ con3270_write(struct console *co, const 
 	spin_unlock_irqrestore(&cp->view.lock,flags);
 }
 
-extern struct tty_driver *tty3270_driver;
-
 static struct tty_driver *
 con3270_device(struct console *c, int *index)
 {

Index: quilt-2.6/drivers/s390/char/sclp.c
===================================================================
@@ -93,6 +93,7 @@ static volatile enum sclp_mask_state_t {
 #define SCLP_RETRY_INTERVAL	30
 
 static void sclp_process_queue(void);
+static void __sclp_make_read_req(void);
 static int sclp_init_mask(int calculate);
 static int sclp_init(void);
 

@@ -115,7 +116,6 @@ sclp_service_call(sclp_cmdw_t command, v
 	return 0;
 }
 
-static inline void __sclp_make_read_req(void);
 
 static void
 __sclp_queue_read_req(void)

@@ -318,8 +318,7 @@ sclp_read_cb(struct sclp_req *req, void 
 }
 
 /* Prepare read event data request. Called while sclp_lock is locked. */
-static inline void
-__sclp_make_read_req(void)
+static void __sclp_make_read_req(void)
 {
 	struct sccb_header *sccb;
 

Index: quilt-2.6/drivers/s390/char/tty3270.c
===================================================================
@@ -25,8 +25,8 @@
 #include <asm/ebcdic.h>
 #include <asm/uaccess.h>
 
-
 #include "raw3270.h"
+#include "tty3270.h"
 #include "keyboard.h"
 
 #define TTY3270_CHAR_BUF_SIZE 256

@@ -1338,8 +1338,11 @@ tty3270_getpar(struct tty3270 *tp, int i
 static void
 tty3270_goto_xy(struct tty3270 *tp, int cx, int cy)
 {
-	tp->cx = min_t(int, tp->view.cols - 1, max_t(int, 0, cx));
-	cy = min_t(int, tp->view.rows - 3, max_t(int, 0, cy));
+	int max_cx = max(0, cx);
+	int max_cy = max(0, cy);
+
+	tp->cx = min_t(int, tp->view.cols - 1, max_cx);
+	cy = min_t(int, tp->view.rows - 3, max_cy);
 	if (cy != tp->cy) {
 		tty3270_convert_line(tp, tp->cy);
 		tp->cy = cy;

Index: quilt-2.6/drivers/s390/char/tty3270.h
===================================================================
@@ -0,0 +1,16 @@
+/*
+ *  drivers/s390/char/tty3270.h
+ *
+ *    Copyright IBM Corp. 2007
+ *
+ */
+
+#ifndef __DRIVERS_S390_CHAR_TTY3270_H
+#define __DRIVERS_S390_CHAR_TTY3270_H
+
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+
+extern struct tty_driver *tty3270_driver;
+
+#endif /* __DRIVERS_S390_CHAR_TTY3270_H */

Index: quilt-2.6/drivers/s390/cio/chp.c
===================================================================
@@ -140,9 +140,11 @@ static ssize_t chp_measurement_chars_rea
 					  char *buf, loff_t off, size_t count)
 {
 	struct channel_path *chp;
+	struct device *device;
 	unsigned int size;
 
-	chp = to_channelpath(container_of(kobj, struct device, kobj));
+	device = container_of(kobj, struct device, kobj);
+	chp = to_channelpath(device);
 	if (!chp->cmg_chars)
 		return 0;
 

@@ -193,9 +195,11 @@ static ssize_t chp_measurement_read(stru
 {
 	struct channel_path *chp;
 	struct channel_subsystem *css;
+	struct device *device;
 	unsigned int size;
 
-	chp = to_channelpath(container_of(kobj, struct device, kobj));
+	device = container_of(kobj, struct device, kobj);
+	chp = to_channelpath(device);
 	css = to_css(chp->dev.parent);
 
 	size = sizeof(struct cmg_entry);

Index: quilt-2.6/drivers/s390/cio/cmf.c
===================================================================
@@ -489,7 +489,6 @@ static struct cmb_area cmb_area = {
 	.num_channels  = 1024,
 };
 
-
 /* ****** old style CMB handling ********/
 
 /*

@@ -812,7 +811,7 @@ static struct cmb_operations cmbops_basi
 	.align	    = align_cmb,
 	.attr_group = &cmf_attr_group,
 };
-
+
 /* ******** extended cmb handling ********/
 
 /**

@@ -1079,7 +1078,6 @@ static struct cmb_operations cmbops_exte
 	.align	    = align_cmbe,
 	.attr_group = &cmf_attr_group_ext,
 };
-
 
 static ssize_t cmb_show_attr(struct device *dev, char *buf, enum cmb_index idx)
 {

Index: quilt-2.6/drivers/s390/scsi/zfcp_dbf.c
===================================================================
@@ -19,8 +19,8 @@
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#include <asm/debug.h>
 #include <linux/ctype.h>
+#include <asm/debug.h>
 #include "zfcp_ext.h"
 
 static u32 dbfsize = 4;

@@ -35,17 +35,17 @@ static int
 zfcp_dbf_stck(char *out_buf, const char *label, unsigned long long stck)
 {
 	unsigned long long sec;
-	struct timespec xtime;
+	struct timespec dbftime;
 	int len = 0;
 
 	stck -= 0x8126d60e46000000LL - (0x3c26700LL * 1000000 * 4096);
 	sec = stck >> 12;
 	do_div(sec, 1000000);
-	xtime.tv_sec = sec;
+	dbftime.tv_sec = sec;
 	stck -= (sec * 1000000) << 12;
-	xtime.tv_nsec = ((stck * 1000) >> 12);
+	dbftime.tv_nsec = ((stck * 1000) >> 12);
 	len += sprintf(out_buf + len, "%-24s%011lu:%06lu\n",
-		       label, xtime.tv_sec, xtime.tv_nsec);
+		       label, dbftime.tv_sec, dbftime.tv_nsec);
 
 	return len;
 }

Index: quilt-2.6/drivers/s390/scsi/zfcp_erp.c
===================================================================
@@ -54,7 +54,7 @@ static int zfcp_erp_strategy_check_adapt
 static int zfcp_erp_strategy_statechange(int, u32, struct zfcp_adapter *,
 					 struct zfcp_port *,
 					 struct zfcp_unit *, int);
-static inline int zfcp_erp_strategy_statechange_detected(atomic_t *, u32);
+static int zfcp_erp_strategy_statechange_detected(atomic_t *, u32);
 static int zfcp_erp_strategy_followup_actions(int, struct zfcp_adapter *,
 					      struct zfcp_port *,
 					      struct zfcp_unit *, int);

@@ -106,8 +106,8 @@ static void zfcp_erp_action_cleanup(int,
 static void zfcp_erp_action_ready(struct zfcp_erp_action *);
 static int  zfcp_erp_action_exists(struct zfcp_erp_action *);
 
-static inline void zfcp_erp_action_to_ready(struct zfcp_erp_action *);
-static inline void zfcp_erp_action_to_running(struct zfcp_erp_action *);
+static void zfcp_erp_action_to_ready(struct zfcp_erp_action *);
+static void zfcp_erp_action_to_running(struct zfcp_erp_action *);
 
 static void zfcp_erp_memwait_handler(unsigned long);
 

@@ -952,7 +952,7 @@ zfcp_erp_memwait_handler(unsigned long d
  *		action gets an appropriate flag and will be processed
  *		accordingly
  */
-void zfcp_erp_timeout_handler(unsigned long data)
+static void zfcp_erp_timeout_handler(unsigned long data)
 {
 	struct zfcp_erp_action *erp_action = (struct zfcp_erp_action *) data;
 	struct zfcp_adapter *adapter = erp_action->adapter;

@@ -1491,7 +1491,7 @@ zfcp_erp_strategy_statechange(int action
 	return retval;
 }
 
-static inline int
+static int
 zfcp_erp_strategy_statechange_detected(atomic_t * target_status, u32 erp_status)
 {
 	return

@@ -2001,7 +2001,7 @@ zfcp_erp_adapter_strategy_generic(struct
  * returns:	0 - successful setup
  *		!0 - failed setup
  */
-int
+static int
 zfcp_erp_adapter_strategy_open_qdio(struct zfcp_erp_action *erp_action)
 {
 	int retval;

@@ -3248,8 +3248,7 @@ static void zfcp_erp_action_dismiss_unit
 		zfcp_erp_action_dismiss(&unit->erp_action);
 }
 
-static inline void
-zfcp_erp_action_to_running(struct zfcp_erp_action *erp_action)
+static void zfcp_erp_action_to_running(struct zfcp_erp_action *erp_action)
 {
 	struct zfcp_adapter *adapter = erp_action->adapter;
 

@@ -3258,8 +3257,7 @@ zfcp_erp_action_to_running(struct zfcp_e
 	list_move(&erp_action->list, &erp_action->adapter->erp_running_head);
 }
 
-static inline void
-zfcp_erp_action_to_ready(struct zfcp_erp_action *erp_action)
+static void zfcp_erp_action_to_ready(struct zfcp_erp_action *erp_action)
 {
 	struct zfcp_adapter *adapter = erp_action->adapter;
 

Index: quilt-2.6/include/asm-s390/s390_ext.h
===================================================================
@@ -5,7 +5,7 @@
  *  include/asm-s390/s390_ext.h
  *
  *  S390 version
- *    Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Copyright IBM Corp. 1999,2007
  *    Author(s): Holger Smolinski ([email protected]),
  *               Martin Schwidefsky ([email protected])
  */

@@ -14,15 +14,11 @@
 
 typedef void (*ext_int_handler_t)(__u16 code);
 
-/*
- * Warning: if you change ext_int_info_t you have to change the
- * external interrupt handler in entry.S too.
- */ 
 typedef struct ext_int_info_t {
 	struct ext_int_info_t *next;
 	ext_int_handler_t handler;
 	__u16 code;
-} __attribute__ ((packed)) ext_int_info_t;
+} ext_int_info_t;
 
 extern ext_int_info_t *ext_int_hash[];
 

Index: quilt-2.6/include/asm-s390/cache.h
===================================================================
@@ -14,8 +14,6 @@
 #define L1_CACHE_BYTES     256
 #define L1_CACHE_SHIFT     8
 
-#define ARCH_KMALLOC_MINALIGN	8
-
 #define __read_mostly __attribute__((__section__(".data.read_mostly")))
 
 #endif

Index: quilt-2.6/drivers/s390/cio/qdio.c
===================================================================
@@ -1024,9 +1024,9 @@ __qdio_outbound_processing(struct qdio_q
 }
 
 static void
-qdio_outbound_processing(struct qdio_q *q)
+qdio_outbound_processing(unsigned long q)
 {
-	__qdio_outbound_processing(q);
+	__qdio_outbound_processing((struct qdio_q *) q);
 }
 
 /************************* INBOUND ROUTINES *******************************/

@@ -1449,9 +1449,10 @@ out:
 }
 
 static void
-tiqdio_inbound_processing(struct qdio_q *q)
+tiqdio_inbound_processing(unsigned long q)
 {
-	__tiqdio_inbound_processing(q, atomic_read(&spare_indicator_usecount));
+	__tiqdio_inbound_processing((struct qdio_q *) q,
+				    atomic_read(&spare_indicator_usecount));
 }
 
 static void

@@ -1494,9 +1495,9 @@ again:
 }
 
 static void
-qdio_inbound_processing(struct qdio_q *q)
+qdio_inbound_processing(unsigned long q)
 {
-	__qdio_inbound_processing(q);
+	__qdio_inbound_processing((struct qdio_q *) q);
 }
 
 /************************* MAIN ROUTINES *******************************/

@@ -1760,12 +1761,15 @@ qdio_fill_qs(struct qdio_irq *irq_ptr, s
 		q->handler=input_handler;
 		q->dev_st_chg_ind=irq_ptr->dev_st_chg_ind;
 
-		q->tasklet.data=(unsigned long)q;
 		/* q->is_thinint_q isn't valid at this time, but
-		 * irq_ptr->is_thinint_irq is */
-		q->tasklet.func=(void(*)(unsigned long))
-			((irq_ptr->is_thinint_irq)?&tiqdio_inbound_processing:
-			 &qdio_inbound_processing);
+		 * irq_ptr->is_thinint_irq is
+		 */
+		if (irq_ptr->is_thinint_irq)
+			tasklet_init(&q->tasklet, tiqdio_inbound_processing,
+				     (unsigned long) q);
+		else
+			tasklet_init(&q->tasklet, qdio_inbound_processing,
+				     (unsigned long) q);
 
 		/* actually this is not used for inbound queues. yet. */
 		atomic_set(&q->busy_siga_counter,0);

@@ -1836,13 +1840,10 @@ qdio_fill_qs(struct qdio_irq *irq_ptr, s
 		q->last_move_ftc=0;
 		q->handler=output_handler;
 
-		q->tasklet.data=(unsigned long)q;
-		q->tasklet.func=(void(*)(unsigned long))
-			&qdio_outbound_processing;
-		q->timer.function=(void(*)(unsigned long))
-			&qdio_outbound_processing;
-		q->timer.data = (long)q;
-		init_timer(&q->timer);
+		tasklet_init(&q->tasklet, qdio_outbound_processing,
+			     (unsigned long) q);
+		setup_timer(&q->timer, qdio_outbound_processing,
+			    (unsigned long) q);
 
 		atomic_set(&q->busy_siga_counter,0);
 		q->timing.busy_start=0;

Index: quilt-2.6/drivers/s390/block/dasd_int.h
===================================================================
@@ -53,6 +53,7 @@
 #include <linux/genhd.h>
 #include <linux/hdreg.h>
 #include <linux/interrupt.h>
+#include <linux/log2.h>
 #include <asm/ccwdev.h>
 #include <linux/workqueue.h>
 #include <asm/debug.h>

@@ -456,7 +457,7 @@ dasd_free_chunk(struct list_head *chunk_
 static inline int
 dasd_check_blocksize(int bsize)
 {
-	if (bsize < 512 || bsize > 4096 || (bsize & (bsize - 1)) != 0)
+	if (bsize < 512 || bsize > 4096 || !is_power_of_2(bsize))
 		return -EMEDIUMTYPE;
 	return 0;
 }

Index: quilt-2.6/drivers/s390/cio/qdio.c
===================================================================
@@ -3727,7 +3727,7 @@ qdio_performance_stats_store(struct bus_
 #endif /* CONFIG_64BIT */
 		}
 	} else {
-		QDIO_PRINT_WARN("QDIO performance_stats: write 0 or 1 to this file!\n");
+		QDIO_PRINT_ERR("QDIO performance_stats: write 0 or 1 to this file!\n");
 		return -EINVAL;
 	}
 	return count;

Index: quilt-2.6/include/asm-s390/system.h
===================================================================
@@ -130,6 +130,8 @@ extern void pfault_fini(void);
 	__ret;								  \
 })
 
+extern void __xchg_called_with_bad_pointer(void);
+
 static inline unsigned long __xchg(unsigned long x, void * ptr, int size)
 {
 	unsigned long addr, old;

@@ -150,8 +152,7 @@ static inline unsigned long __xchg(unsig
 			: "=&d" (old), "=m" (*(int *) addr)
 			: "d" (x << shift), "d" (~(255 << shift)), "a" (addr),
 			  "m" (*(int *) addr) : "memory", "cc", "0");
-		x = old >> shift;
-		break;
+		return old >> shift;
 	case 2:
 		addr = (unsigned long) ptr;
 		shift = (2 ^ (addr & 2)) << 3;

@@ -166,8 +167,7 @@ static inline unsigned long __xchg(unsig
 			: "=&d" (old), "=m" (*(int *) addr)
 			: "d" (x << shift), "d" (~(65535 << shift)), "a" (addr),
 			  "m" (*(int *) addr) : "memory", "cc", "0");
-		x = old >> shift;
-		break;
+		return old >> shift;
 	case 4:
 		asm volatile(
 			"	l	%0,0(%3)\n"

@@ -176,8 +176,7 @@ static inline unsigned long __xchg(unsig
 			: "=&d" (old), "=m" (*(int *) ptr)
 			: "d" (x), "a" (ptr), "m" (*(int *) ptr)
 			: "memory", "cc");
-		x = old;
-		break;
+		return old;
 #ifdef __s390x__
 	case 8:
 		asm volatile(

@@ -187,11 +186,11 @@ static inline unsigned long __xchg(unsig
 			: "=&d" (old), "=m" (*(long *) ptr)
 			: "d" (x), "a" (ptr), "m" (*(long *) ptr)
 			: "memory", "cc");
-		x = old;
-		break;
+		return old;
 #endif /* __s390x__ */
-        }
-        return x;
+	}
+	__xchg_called_with_bad_pointer();
+	return x;
 }
 
 /*

@@ -206,6 +205,8 @@ static inline unsigned long __xchg(unsig
 	((__typeof__(*(ptr)))__cmpxchg((ptr),(unsigned long)(o),\
 					(unsigned long)(n),sizeof(*(ptr))))
 
+extern void __cmpxchg_called_with_bad_pointer(void);
+
 static inline unsigned long
 __cmpxchg(volatile void *ptr, unsigned long old, unsigned long new, int size)
 {

@@ -270,7 +271,8 @@ __cmpxchg(volatile void *ptr, unsigned l
 		return prev;
 #endif /* __s390x__ */
         }
-        return old;
+	__cmpxchg_called_with_bad_pointer();
+	return old;
 }
 
 /*

Index: quilt-2.6/arch/s390/kernel/ipl.c
===================================================================
@@ -735,10 +735,10 @@ void do_reipl(void)
 	case REIPL_METHOD_CCW_VM:
 		reipl_get_ascii_loadparm(loadparm);
 		if (strlen(loadparm) == 0)
-			sprintf(buf, "IPL %X",
+			sprintf(buf, "IPL %X CLEAR",
 				reipl_block_ccw->ipl_info.ccw.devno);
 		else
-			sprintf(buf, "IPL %X LOADPARM '%s'",
+			sprintf(buf, "IPL %X CLEAR LOADPARM '%s'",
 				reipl_block_ccw->ipl_info.ccw.devno, loadparm);
 		__cpcmd(buf, NULL, 0, NULL);
 		break;

Index: quilt-2.6/drivers/s390/char/zcore.c
===================================================================
@@ -141,15 +141,16 @@ static int memcpy_real(void *dest, unsig
 
 	if (count == 0)
 		return 0;
-	flags = __raw_local_irq_stnsm(0xf8); /* switch to real mode */
+	flags = __raw_local_irq_stnsm(0xf8UL); /* switch to real mode */
 	asm volatile (
 		"0:	mvcle	%1,%2,0x0\n"
 		"1:	jo	0b\n"
 		"	lhi	%0,0x0\n"
 		"2:\n"
 		EX_TABLE(1b,2b)
-		: "+d" (rc)
-		: "d" (_dest), "d" (_src), "d" (_len1), "d" (_len2)
+		: "+d" (rc), "+d" (_dest), "+d" (_src), "+d" (_len1),
+		  "+d" (_len2), "=m" (*((long*)dest))
+		: "m" (*((long*)src))
 		: "cc", "memory");
 	__raw_local_irq_ssm(flags);
 

Index: quilt-2.6/include/asm-s390/pgtable.h
===================================================================
@@ -107,11 +107,18 @@ extern char empty_zero_page[PAGE_SIZE];
  * any out-of-bounds memory accesses will hopefully be caught.
  * The vmalloc() routines leaves a hole of 4kB between each vmalloced
  * area for the same reason. ;)
+ * vmalloc area starts at 4GB to prevent syscall table entry exchanging
+ * from modules.
  */
 extern unsigned long vmalloc_end;
-#define VMALLOC_OFFSET  (8*1024*1024)
-#define VMALLOC_START   (((unsigned long) high_memory + VMALLOC_OFFSET) \
-			 & ~(VMALLOC_OFFSET-1))
+
+#ifdef CONFIG_64BIT
+#define VMALLOC_ADDR	(max(0x100000000UL, (unsigned long) high_memory))
+#else
+#define VMALLOC_ADDR	((unsigned long) high_memory)
+#endif
+#define VMALLOC_OFFSET	(8*1024*1024)
+#define VMALLOC_START	((VMALLOC_ADDR + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1))
 #define VMALLOC_END	vmalloc_end
 
 /*

Index: quilt-2.6/arch/s390/kernel/cpcmd.c
===================================================================
@@ -2,7 +2,7 @@
  *  arch/s390/kernel/cpcmd.c
  *
  *  S390 version
- *    Copyright (C) 1999,2005 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Copyright IBM Corp. 1999,2007
  *    Author(s): Martin Schwidefsky ([email protected]),
  *               Christian Borntraeger ([email protected]),
  */

@@ -21,6 +21,49 @@
 static DEFINE_SPINLOCK(cpcmd_lock);
 static char cpcmd_buf[241];
 
+static int diag8_noresponse(int cmdlen)
+{
+	register unsigned long reg2 asm ("2") = (addr_t) cpcmd_buf;
+	register unsigned long reg3 asm ("3") = cmdlen;
+
+	asm volatile(
+#ifndef CONFIG_64BIT
+		"	diag	%1,%0,0x8\n"
+#else /* CONFIG_64BIT */
+		"	sam31\n"
+		"	diag	%1,%0,0x8\n"
+		"	sam64\n"
+#endif /* CONFIG_64BIT */
+		: "+d" (reg3) : "d" (reg2) : "cc");
+	return reg3;
+}
+
+static int diag8_response(int cmdlen, char *response, int *rlen)
+{
+	register unsigned long reg2 asm ("2") = (addr_t) cpcmd_buf;
+	register unsigned long reg3 asm ("3") = (addr_t) response;
+	register unsigned long reg4 asm ("4") = cmdlen | 0x40000000L;
+	register unsigned long reg5 asm ("5") = *rlen;
+
+	asm volatile(
+#ifndef CONFIG_64BIT
+		"	diag	%2,%0,0x8\n"
+		"	brc	8,1f\n"
+		"	ar	%1,%4\n"
+#else /* CONFIG_64BIT */
+		"	sam31\n"
+		"	diag	%2,%0,0x8\n"
+		"	sam64\n"
+		"	brc	8,1f\n"
+		"	agr	%1,%4\n"
+#endif /* CONFIG_64BIT */
+		"1:\n"
+		: "+d" (reg4), "+d" (reg5)
+		: "d" (reg2), "d" (reg3), "d" (*rlen) : "cc");
+	*rlen = reg5;
+	return reg4;
+}
+
 /*
  * __cpcmd has some restrictions over cpcmd
  *  - the response buffer must reside below 2GB (if any)

@@ -28,59 +71,27 @@ static char cpcmd_buf[241];
  */
 int  __cpcmd(const char *cmd, char *response, int rlen, int *response_code)
 {
-	unsigned cmdlen;
-	int return_code, return_len;
+	int cmdlen;
+	int rc;
+	int response_len;
 
 	cmdlen = strlen(cmd);
 	BUG_ON(cmdlen > 240);
 	memcpy(cpcmd_buf, cmd, cmdlen);
 	ASCEBC(cpcmd_buf, cmdlen);
 
-	if (response != NULL && rlen > 0) {
-		register unsigned long reg2 asm ("2") = (addr_t) cpcmd_buf;
-		register unsigned long reg3 asm ("3") = (addr_t) response;
-		register unsigned long reg4 asm ("4") = cmdlen | 0x40000000L;
-		register unsigned long reg5 asm ("5") = rlen;
-
+	if (response) {
 		memset(response, 0, rlen);
-		asm volatile(
-#ifndef CONFIG_64BIT
-			"	diag	%2,%0,0x8\n"
-			"	brc	8,1f\n"
-			"	ar	%1,%4\n"
-#else /* CONFIG_64BIT */
-			"	sam31\n"
-			"	diag	%2,%0,0x8\n"
-			"	sam64\n"
-			"	brc	8,1f\n"
-			"	agr	%1,%4\n"
-#endif /* CONFIG_64BIT */
-			"1:\n"
-			: "+d" (reg4), "+d" (reg5)
-			: "d" (reg2), "d" (reg3), "d" (rlen) : "cc");
-		return_code = (int) reg4;
-		return_len = (int) reg5;
-                EBCASC(response, rlen);
+		response_len = rlen;
+		rc = diag8_response(cmdlen, response, &rlen);
+		EBCASC(response, response_len);
         } else {
-		register unsigned long reg2 asm ("2") = (addr_t) cpcmd_buf;
-		register unsigned long reg3 asm ("3") = cmdlen;
-		return_len = 0;
-		asm volatile(
-#ifndef CONFIG_64BIT
-			"	diag	%1,%0,0x8\n"
-#else /* CONFIG_64BIT */
-			"	sam31\n"
-			"	diag	%1,%0,0x8\n"
-			"	sam64\n"
-#endif /* CONFIG_64BIT */
-			: "+d" (reg3) : "d" (reg2) : "cc");
-		return_code = (int) reg3;
+		rc = diag8_noresponse(cmdlen);
         }
-	if (response_code != NULL)
-		*response_code = return_code;
-	return return_len;
+	if (response_code)
+		*response_code = rc;
+	return rlen;
 }
-
 EXPORT_SYMBOL(__cpcmd);
 
 int cpcmd(const char *cmd, char *response, int rlen, int *response_code)

@@ -109,5 +120,4 @@ int cpcmd(const char *cmd, char *respons
 	}
 	return len;
 }
-
 EXPORT_SYMBOL(cpcmd);

Index: quilt-2.6/drivers/s390/char/tape_3590.c
===================================================================
@@ -713,16 +713,22 @@ static void tape_3590_med_state_set(stru
 
 	c_info = &TAPE_3590_CRYPT_INFO(device);
 
-	if (sense->masst == MSENSE_UNASSOCIATED) {
+	DBF_EVENT(6, "medium state: %x:%x\n", sense->macst, sense->masst);
+	switch (sense->macst) {
+	case 0x04:
+	case 0x05:
+	case 0x06:
 		tape_med_state_set(device, MS_UNLOADED);
 		TAPE_3590_CRYPT_INFO(device).medium_status = 0;
 		return;
-	}
-	if (sense->masst != MSENSE_ASSOCIATED_MOUNT) {
-		PRINT_ERR("Unknown medium state: %x\n", sense->masst);
+	case 0x08:
+	case 0x09:
+		tape_med_state_set(device, MS_LOADED);
+		break;
+	default:
+		tape_med_state_set(device, MS_UNKNOWN);
 		return;
 	}
-	tape_med_state_set(device, MS_LOADED);
 	c_info->medium_status |= TAPE390_MEDIUM_LOADED_MASK;
 	if (sense->flags & MSENSE_CRYPT_MASK) {
 		PRINT_INFO("Medium is encrypted (%04x)\n", sense->flags);

@@ -840,15 +846,17 @@ tape_3590_unsolicited_irq(struct tape_de
 		/* Probably result of halt ssch */
 		return TAPE_IO_PENDING;
 	else if (irb->scsw.dstat == 0x85)
-		/* Device Ready -> check medium state */
-		tape_3590_schedule_work(device, TO_MSEN);
-	else if (irb->scsw.dstat & DEV_STAT_ATTENTION)
+		/* Device Ready */
+		DBF_EVENT(3, "unsol.irq! tape ready: %08x\n", device->cdev_id);
+	else if (irb->scsw.dstat & DEV_STAT_ATTENTION) {
 		tape_3590_schedule_work(device, TO_READ_ATTMSG);
-	else {
+	} else {
 		DBF_EVENT(3, "unsol.irq! dev end: %08x\n", device->cdev_id);
 		PRINT_WARN("Unsolicited IRQ (Device End) caught.\n");
 		tape_dump_sense(device, NULL, irb);
 	}
+	/* check medium state */
+	tape_3590_schedule_work(device, TO_MSEN);
 	return TAPE_IO_SUCCESS;
 }
 

Index: quilt-2.6/drivers/s390/char/vmwatchdog.c
===================================================================
@@ -66,8 +66,8 @@ static int __diag288(enum vmwdt_func fun
 		"0:	la	%0,0\n"
 		"1:\n"
 		EX_TABLE(0b,1b)
-		: "=d" (err) : "d"(__func), "d"(__timeout),
-		  "d"(__cmdp), "d"(__cmdl), "0" (-EINVAL) : "1", "cc");
+		: "+d" (err) : "d"(__func), "d"(__timeout),
+		  "d"(__cmdp), "d"(__cmdl) : "1", "cc");
 	return err;
 }
 

index f326451..e3ce489 100644
@@ -9,11 +9,12 @@
 #ifndef _S390_PAGE_H
 #define _S390_PAGE_H
 
+#include <linux/const.h>
 #include <asm/types.h>
 
 /* PAGE_SHIFT determines the page size */
 #define PAGE_SHIFT      12
-#define PAGE_SIZE       (1UL << PAGE_SHIFT)
+#define PAGE_SIZE       (_AC(1,UL) << PAGE_SHIFT)
 #define PAGE_MASK       (~(PAGE_SIZE-1))
 #define PAGE_DEFAULT_ACC	0
 #define PAGE_DEFAULT_KEY	(PAGE_DEFAULT_ACC << 4)