hostap_cs: Add device ID for Telekom T-Sinus 111card

This adds the PCMCIA device ID for the Deutsche Telekom T-Sinus 111card to hostap_cs.

$ /sbin/lspcmcia -v
[...]
Socket 0 Device 0:      [hostap_cs]             (bus ID: 0.0)
        Configuration:  state: on
        Product Name:   T-Sinus 111card 2.0.0
        Identification: manf_id: 0x01bf card_id: 0x3301
                        function: 6 (network)
                        prod_id(1): "T-Sinus" (0x8c389dc1)
                        prod_id(2): "111card" (0x6a23ac17)
                        prod_id(3): --- (---)
                        prod_id(4): "2.0.0" (0x92b9effb)

Downloading primary firmware /lib/firmware/pm010102.hex srec summary for pm010102.hex
Included file name: PM010102.HEX
Component: 0x0015 1.1.2 (primary firmware)

Verifying update compatibility and combining data:
Plugging PDR 0400 (NIC configuration): ram16=1 pci=0 (03 00) OK.

Downloading to volatile memory (RAM).
OK.
srec summary for pm010102.hex
Included file name: PM010102.HEX
Component: 0x0015 1.1.2 (primary firmware)

ioctl[PRISM2_IOCTL_HOSTAPD]: No data available
STAID not available (maybe running PRI-only)
ioctl[PRISM2_IOCTL_HOSTAPD]: No data available
ioctl[PRISM2_IOCTL_HOSTAPD]: No data available

Verifying update compatibility and combining data:
Plug record length mismatch (PDR=0x0001): 12 != 16 ==> extend from default
OK.

Downloading to volatile memory (RAM).
OK.
Downloading secondary (station) firmware /lib/firmware/rf010800.hex srec summary for rf010800.hex
Included file name: RF010800.hex
Component: 0x001f 1.8.0 (station firmware)

ioctl[PRISM2_IOCTL_HOSTAPD]: No data available
STAID not available (maybe running PRI-only)
ioctl[PRISM2_IOCTL_HOSTAPD]: No data available
ioctl[PRISM2_IOCTL_HOSTAPD]: No data available

Verifying update compatibility and combining data:
Could not find data position for plugging PDR 0x0413 at 0x0000118e (len=2) PDR 0x0413 is not in wlan card PDA and there is no default data. Ignoring plug record. OK.

Downloading to volatile memory (RAM).
OK.
Components after download:
NICID: 0x801d v1.0.0
PRIID: 0x0015 v1.1.2
STAID: 0x001f v1.8.0
Card wlan1 is ready with both PRI and STA firmware images

This patch has been diff'ed against net-2.6.24 commit 147fd2f057af893f63df5bad497bb60ac3abbaab - but applies and works reliably down to kernel 2.6.16.

---

 drivers/net/wireless/hostap/hostap_cs.c |    1 +
 1 files changed, 1 insertions(+), 0 deletions(-)

index f9cf22b..2f8ea07 100644
@@ -822,6 +822,7 @@ static struct pcmcia_device_id hostap_cs_ids[] = {
 	PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0777),
 	PCMCIA_DEVICE_MANF_CARD(0x0126, 0x8000),
 	PCMCIA_DEVICE_MANF_CARD(0x0138, 0x0002),
+	PCMCIA_DEVICE_MANF_CARD(0x01bf, 0x3301),
 	PCMCIA_DEVICE_MANF_CARD(0x0250, 0x0002),
 	PCMCIA_DEVICE_MANF_CARD(0x026f, 0x030b),
 	PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1612),

Regards
	Stefan Lippers-Hollmann