MMC: OMAP: Add MMC multislot support
cover MMC: OMAP: Add MMC multislot support
Hi Tony and folks,
This is the latest 'MMC: OMAP: Add MMC multislot support' patch series with changes, corrections and improvements based on comments and suggestions from community (mainly Tony, Brownell and Trilok) and coworkers.
Just to remind you, this patch series adds the MMC multislot support for N800 and TI OMAP H2 and H3 boards. It's based on Juha's and Jarkko's earlier implementation and it can be applied against most updated linux-omap tree (2.6.23-rc6-omap1).
I've tested with MMC, SD and SDHC cards and looks fine for the boards mentioned above.
Testing, comments and suggestions are welcome.
BR,
Carlos.
Signature · 7 lines
Carlos Eduardo Aguiar Nokia Institute of Technology - INdT Open Source Mobile Research Center - OSMRC - Manaus Core Team Phone: +55 92 2126-1079 Mobile: +55 92 8127-1797 E-mail: [email protected]
Quoted 11 lines · Carlos Aguiar
Hi Tony and folks,
This is the latest 'MMC: OMAP: Add MMC multislot support' patch series with changes, corrections and improvements based on comments and suggestions from community (mainly Tony, Brownell and Trilok) and coworkers.
Just to remind you, this patch series adds the MMC multislot support for N800 and TI OMAP H2 and H3 boards. It's based on Juha's and Jarkko's earlier implementation and it can be applied against most updated linux-omap tree (2.6.23-rc6-omap1).
Quoted 4 lines
I've tested with MMC, SD and SDHC cards and looks fine for the boards mentioned above.
Testing, comments and suggestions are welcome.
Any news on using these patches on 1510? There are several 15xx based boards where the only root is MMC, so we should make sure it works on 15xx before applying these.
Regards,
Tony
Quoted 13 lines · ext Tony Lindgren
Quoted 11 lines · Carlos Aguiar
Hi Tony and folks,
This is the latest 'MMC: OMAP: Add MMC multislot support' patch series with changes, corrections and improvements based on comments and suggestions from community (mainly Tony, Brownell and Trilok) and coworkers.
Just to remind you, this patch series adds the MMC multislot support for N800 and TI OMAP H2 and H3 boards. It's based on Juha's and Jarkko's earlier implementation and it can be applied against most updated linux-omap tree (2.6.23-rc6-omap1).
Quoted 7 lines
Quoted 5 lines
I've tested with MMC, SD and SDHC cards and looks fine for the boards mentioned above.
Testing, comments and suggestions are welcome.
Hi Tony,
Quoted 4 lines
Any news on using these patches on 1510? There are several 15xx based boards where the only root is MMC, so we should make sure it works on 15xx before applying these.
I'm working now with an Innovator 1510 in order to provide such support to this board.
I've already implemented a version for Siemens SX1 (1510 based). Today I'll send to Vladimir Ananiev and Pavel Machek (as I remember, they provided the MMC support on linux-omap tree) to test it. I have no such boards here.
As soon as the support is working on 1510 I'll send the patches to you and Linux-OMAP mailing list.
BR,
Carlos.
Quoted 5 lines
Regards,
Tony
Signature · 7 lines
Carlos Eduardo Aguiar Nokia Institute of Technology - INdT Open Source Mobile Research Center - OSMRC - Manaus Core Team Phone: +55 92 2126-1079 Mobile: +55 92 8127-1797 E-mail: [email protected]