2.6.23-mm1

PATCH New Andrew Morton 43 participants 144 messages Oct 12, 2007 – Oct 27, 2007 Page 1 of 2

Subsystems (19)

Networking Network drivers x86 VFS +15 more subsystems

lore

Share & tools

lore

Andrew Morton

author maintainer Applied

2007-10-12 04:32 UTC #0 lore raw

ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.23/2.6.23-mm1/

- I've been largely avoiding applying anything since rc8-mm2 in an attempt to stabilise things for the 2.6.23 merge.

But that didn't stop all the subsystem maintainers from going nuts, with the usual accuracy. We're up to a 37MB diff now, but it seems to be working a bit better.

Boilerplate:

- See the `hot-fixes' directory for any important updates to this patchset.

- To fetch an -mm tree using git, use (for example)

git-fetch git://git.kernel.org/pub/scm/linux/kernel/git/smurf/linux-trees.git tag v2.6.16-rc2-mm1 git-checkout -b local-v2.6.16-rc2-mm1 v2.6.16-rc2-mm1

- -mm kernel commit activity can be reviewed by subscribing to the mm-commits mailing list.

echo "subscribe mm-commits" | mail [email protected]

- If you hit a bug in -mm and it is not obvious which patch caused it, it is most valuable if you can perform a bisection search to identify which patch introduced the bug. Instructions for this process are at

http://www.zip.com.au/~akpm/linux/patches/stuff/bisecting-mm-trees.txt

But beware that this process takes some time (around ten rebuilds and reboots), so consider reporting the bug first and if we cannot immediately identify the faulty patch, then perform the bisection search.

- When reporting bugs, please try to Cc: the relevant maintainer and mailing list on any email.

- When reporting bugs in this kernel via email, please also rewrite the email Subject: in some manner to reflect the nature of the bug. Some developers filter by Subject: when looking for messages to read.

- Occasional snapshots of the -mm lineup are uploaded to ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/mm/ and are announced on the mm-commits list.

Changes since 2.6.23-rc8-mm2:

git-acpi.patch
git-alsa.patch
git-arm.patch
git-audit-master.patch
git-avr32.patch
git-cifs.patch
git-cpufreq.patch
git-powerpc.patch
git-drm.patch
git-dvb.patch
git-hwmon.patch
git-gfs2-nmw.patch
git-hid.patch
git-ieee1394.patch
git-infiniband.patch
git-input.patch
git-jfs.patch
git-jg-misc.patch
git-kbuild.patch
git-kvm.patch
git-leds.patch
git-libata-all.patch
git-m32r.patch
git-md-accel.patch
git-mips.patch
git-mmc.patch
git-mtd.patch
git-ubi.patch
git-net.patch
git-backlight.patch
git-battery.patch
git-nfs.patch
git-nfsd.patch
git-ocfs2.patch
git-r8169.patch
git-selinux.patch
git-s390.patch
git-sched.patch
git-sh.patch
git-sh64.patch
git-scsi-misc.patch
git-block.patch
git-unionfs.patch
git-v9fs.patch
git-watchdog.patch
git-wireless.patch
git-ipwireless_cs.patch
git-newsetup.patch
git-xfs.patch
git-kgdb.patch

git trees

-x86_64-mm-vdso-text-offset.patch -fix-proc-acpi-alarm-to-work-with-bcd-alarm-encodings-award.patch -input-xpad-fix-dependancy-on-leds-class.patch -powerpc-include-pagemaph-in-asm-powerpc-tlbh.patch -exit-acpi-processor-module-gracefully-if-acpi-is-disabled.patch -hibernation-make-sure-that-acpi-is-enabled-in-acpi_hibernation_finish.patch -acpi-clean-up-acpi_enter_sleep_state_prep.patch -acpi-sbs-fix-sbs-add-alarm-patch.patch -acpi-suppress-uninitialized-var-warning.patch -generic-ac97-mixer-modem-oss-use-list_for_each_entry.patch -documentation-arm-00-index-add-missing-entries.patch -fs-cifs-connectc-kmalloc-memset-conversion-to-kzalloc.patch -cpufreq-move-policys-governor-initialisation-out-of-low-level-drivers-into-cpufreq-core.patch -cpufreq-allow-ondemand-and-conservative-cpufreq-governors-to-be-used-as-default.patch -allow-ondemand-and-conservative-cpufreq-governors-to-be-used-as-default-kconfig-fix.patch -cpufreq-mark-hotplug-notifier-callback-as-__cpuinit.patch -cpufreq-implement-config_cpu_freq-stub-for.patch -cpufreq_stats-misc-cpuinit-section-annotations.patch -powerpc-vdso-install-unstripped-copies-on-disk.patch -powerpc-vdso-install-unstripped-copies-on-disk-update.patch -sky-cpu-and-nexus-code-style-improvement.patch -sky-cpu-and-nexus-include-ioh.patch -sky-cpu-and-nexus-check-for-platform_get_resource-ret.patch -sky-cpu-and-nexus-check-for-create_proc_entry-ret-code.patch -sky-cpu-use-c99-style-for-struct-init.patch -sky-cpu-and-nexus-get-rid-of-useless-null-init.patch -sky-cpu-and-nexus-use-seq_file-single_open-on-proc-interface.patch -powerpc-proper-defconfig-for-crosscompiles.patch -powerpc-proper-defconfig-for-crosscompiles-fix.patch -powerpc-ptrace-check_full_regs.patch -gregkh-driver-sysfs-kill-sysfs_flag_removed.patch -revert-gregkh-driver-warn-when-statically-allocated-kobjects-are-used.patch -fix-gregkh-driver-kobject-remove-the-static-array-for-the-name.patch -fix-3-gregkh-driver-kobject-remove-the-static-array-for-the-name.patch -fix-2--gregkh-driver-drivers-clean-up-direct-setting-of-the-name-of-a-kset.patch -fix-gregkh-driver-drivers-clean-up-direct-setting-of-the-name-of-a-kset.patch -make-kobject-dynamic-allocation-check-use-kallsyms_lookup.patch -kobject-temporarily-save-k_name-on-cleanup-for-debug-message.patch -git-dvb-build-fix.patch
-dvb_en_50221-convert-to-kthread-api.patch -fix-mux-setup-for-composite-sound-on-avertv-307.patch -oops-in-pwc-v4l-driver.patch
-dvb-fix-kconfig-help-text.patch
-bfin_twi-remove-useless-twi_lock-mutex.patch -drivers-hid-hid-debugc-add-kern_debug-prefix-fix-typo-constify-fix.patch -git-jg-misc-fix.patch
-mkmakefile-include-arch-on-o=-builds.patch -include-linux-kbuild-remove-duplicate-entries.patch -tristate-choices-with-mixed-tristate-and-boolean.patch -menuconfig-distinguish-between-selected-by-another-options-and-comments.patch -git-kvm-warning-fix.patch
-pata_acpi-restore-driver.patch -pata_acpi-rework-the-acpi-drivers-based-upon-experience.patch -pata_acpi-use-ata_sff_port_start.patch -libata-correct-handling-of-srst-reset-sequences.patch -libata-add-a-drivers-ide-style-dma-disable.patch -ata-pata_marvell-use-ioread-for-iomap-ped-memory.patch -drivers-ata-pata_ixp4xx_cfc-ioremap-return-code-check.patch -libata-add-human-readable-error-value-decoding-v3.patch -libata-add-a-horkage-entry-for-drq-mishandling-atapi.patch -ahci-add-mcp79-support-to-ahci-driver.patch -ahci-add-mcp79-support-to-ahci-driver-update.patch -pata_pdc202xx_old-fix-timings.patch -pata_ns87415-initial-cut-at-87415-87560-ide-support.patch -pata_ns87415-initial-cut-at-87415-87560-ide-support-fix.patch -fix-hpa-handling-regression.patch
-libata_scsi-fix-transfer-lengths.patch -pata_atiixp-audit-notes-on-locking.patch -pata_hpt3x2n-clean-up-dpll-stuff.patch -libata-fix-hopefully-all-the-remaining-problems-with.patch -fix-ide-ide-hook-acpi-psx-method-to-ide-power-on-off.patch -fix-ide-ide-remove-ide-dma-check.patch -mips-add-gpio-support-to-the-bcm947xx-platform.patch -mips-replace-config_usb_ohci-with-config_usb_ohci_hcd-in-a-few-overlooked-files.patch -git-net-fix-wireless-kconfig.patch
-git-net-fix-spidernet-build.patch
-git-net-sctp-build-fix.patch
-iseries_veth-kill-unused-variable.patch -spider_net_ethtool-keep-up-with-recent-netdev-stats-changes.patch -pasemi_mac-build-fix-after-recent-netdev-stats.patch -net-atm-lecc-printk-warning-fix.patch -document-the-fact-that-smsc-ircc2-will-not-use-pnp-by-default.patch -dgrs-remove-from-build-config-and-maintainer-list.patch -git-net-sctp-hack.patch
-phy-fixed-driver-rework-release-path-and-update.patch -pci-x-pci-express-read-control-interfaces-e1000.patch -drivers-net-cxgb3-xgmacc-remove-dead-code.patch -e1000-if-0-two-functions.patch -eepro100-avoid-potential-null-pointer-deref-in-speedo_init_rx_ring.patch -avoid-possible-null-pointer-deref-in-3c359-driver.patch -export-reciprocal_value-for-modules.patch -sky2-avoid-divide-in-receive-path.patch -skge-remove-broken-and-unused-phy_m_pc_mdi_xmode-macro.patch -fix-a-potential-null-pointer-dereference-in-uli526x_interrupt.patch -phylib-spinlock-fixes-for-softirqs.patch -forcedeth-no-link-is-informational.patch -phylib-irq-event-workqueue-handling-fixes.patch -phylib-fix-an-interrupt-loop-potential-when-halting.patch -clean-up-redundant-phy-write-line-for-uli526x-ethernet.patch -git-backlight-dependency-fix.patch -clean-up-duplicate-includes-in-include-linux-nfs_fsh.patch -revert-gregkh-pci-pci_bridge-device.patch -pci-remove-irritating-try-pci=assign-busses-warning.patch -fix-ide-legacy-mode-resources.patch
-fix-ide-legacy-mode-resources-fix.patch -rt-ptracer-can-monopolize-cpu-was-cpu-hotplug-and-real-time.patch -sched-use-show_regs-to-improve-__schedule_bug-output.patch -some-proc-entries-are-missed-in-sched_domain-sys_ctl-debug.patch -sh-cleanup-struct-irqaction-initializers.patch -sh64-cleanup-struct-irqaction-initializers.patch -git-scsi-misc-arcmsr-build-fix.patch -drivers-scsi-pcmcia-nsp_csc-remove-kernel-24-code.patch -remove-dead-references-to-module_parm-macro.patch -fix-drivers-scsi-fdomainc-config_pci=n-warnings.patch -fix-a-potential-null-pointer-deref-in-the-aic7xxx-ahc_print_register-function.patch -add-includes-to-scsi_transport_iscsih.patch -fix-section-mismatch-in-the-adaptec-dpt-scsi-raid-driver.patch -advansys-printk-fix.patch
-drivers-scsi-immc-fix-check-after-use.patch -mpt-fusion-shut-up-uninitialized-variable.patch
-git-unionfs-fix-2.patch -fix-gregkh-usb-usb-sisusb2vga-convert-printk-to-dev_-macros.patch -usb-gadget-ether-prevent-oops-caused-by-error-interrupt-race.patch -drivers-usb-misc-sisusbvga-sisusbc-kill-two-unused-variables.patch -net-add-ath5k-wireless-driver-fix.patch
-fix-x86_64-mm-unwinder.patch
-kgdb-fix-help-text.patch
-kgdb-fix-docbook-and-kernel-doc-typos.patch -seqfile-merge-duplite-code-to-seq_open_private.patch

Merged into mainline or a subsystem tree

-fix-oops-in-platform-uevent.patch

Unneeded

-slow-down-printk-during-boot-fix-2.patch
-slow-down-printk-during-boot-fix-3.patch
-slow-down-printk-during-boot-fix-4.patch

Folded into slow-down-printk-during-boot.patch

+clockevents-fix-bogus-next_event-reset-for-oneshot-broadcast-devices.patch

clockevents fix

+acpi-fix-bdc-handling-in-drivers-acpi-sleep-procc.patch

ACPI fix

+generic-ac97-mixer-modem-oss-use-list_for_each_entry.patch

ALSA fix

+cifs-build-fix.patch
+cifs-warning-fixes.patch

Fix git-cifs

-agk-dm-dm-ioctl-fix-compat-bounds-test.patch +agk-dm-dm-mpath-rdac-fix-init-race.patch +agk-dm-dm-ioctl-use-constant-struct-size.patch +agk-dm-dm-fix-thaw_bdev.patch +agk-dm-dm-bio_list-macro-renaming.patch +agk-dm-dm-crypt-tidy-pending.patch +agk-dm-dm-crypt-tidy-whitespace.patch +agk-dm-dm-crypt-tidy-labels.patch +agk-dm-dm-mpath-add-retry-pg-init.patch +agk-dm-dm-mpath-add-hp-handler.patch +agk-dm-dm-mpath-hp-retry-if-not-ready.patch +agk-dm-dm-log-split-suspend.patch +agk-dm-dm-raid1-add-mirror_set-to-struct-mirror.patch +agk-dm-dm-raid1-handle-recovery-write-failures.patch

device-mapper tree updates

-git-powerpc-galak.patch

Dropped due to merge problems

+gregkh-driver-howto-update-ja_jp-howto-with-latest-changes.patch +gregkh-driver-driver-core-clean-up-removed-functions-from-the-documentation.patch +gregkh-driver-sysfs-fix-comments-of-sysfs_add-remove_one.patch +gregkh-driver-sysfs-fix-sysfs_chmod_file-such-that-it-updates-sd-s_mode-too.patch +gregkh-driver-sysfs-clean-up-header-files.patch +gregkh-driver-sysfs-kill-sysfs_update_file.patch +gregkh-driver-sysfs-reposition-sysfs_dirent-s_mode.patch +gregkh-driver-sysfs-kill-unnecessary-sysfs_get-in-open-paths.patch +gregkh-driver-sysfs-kill-unnecessary-null-pointer-check-in-sysfs_release.patch +gregkh-driver-sysfs-make-bin-attr-open-get-active-reference-of-parent-too.patch +gregkh-driver-sysfs-make-s_elem-an-anonymous-union.patch +gregkh-driver-sysfs-open-code-sysfs_attach_dentry.patch +gregkh-driver-sysfs-make-sysfs_root-a-regular-directory-dirent.patch +gregkh-driver-sysfs-move-sysfs_dirent-s_children-into-sysfs_dirent-s_dir.patch +gregkh-driver-sysfs-implement-sysfs_open_dirent.patch +gregkh-driver-sysfs-move-sysfs-file-poll-implementation-to-sysfs_open_dirent.patch +gregkh-driver-driver-core-remove-subsystem_init.patch +gregkh-driver-kset-add-some-kerneldoc-to-help-describe-what-these-strange-things-are.patch +gregkh-driver-kobject-update-the-copyrights.patch

driver tree updates

-git-dvb-fixup-2.patch

Unneeded

+git-dvb-fixup.patch +git-dvb-rename-videobuf_qtype_opscopy_to_user.patch +git-dvb-vs-i2c-tree.patch

fix git-dvb

+jdelvare-i2c-i2c-bfin_twi-remove-useless-mutex.patch +jdelvare-i2c-i2c-stub-add-multiple-chip-support.patch +jdelvare-i2c-i2c-dev-rejects-i2c_m_recv_len.patch +jdelvare-i2c-i2c-remove-nop-algo_control-methods.patch +jdelvare-i2c-i2c-remove-algo_control.patch +jdelvare-i2c-i2c-dev-move-interfaces-to-i2c-dev-h.patch +jdelvare-i2c-i2c-at91-mark-as-broken.patch +jdelvare-i2c-i2c-rename-pec-func-bit.patch +jdelvare-i2c-i2c-au1550-fix-misused-register.patch +jdelvare-i2c-i2c-nforce2-timeout-cleanup.patch +jdelvare-i2c-i2c-nforce2-implement-abort.patch +jdelvare-i2c-i2c-nforce2-declare-pec-functionality.patch

I2C tree updates

+applesmc-for-mac-pro-2-x-quad-core-fix.patch

Fix applesmc-for-mac-pro-2-x-quad-core.patch

-ia64-tree-wide-misc-__cpuinitdata-init-exit-fix.patch

Folded into ia64-tree-wide-misc-__cpuinitdata-init-exit.patch

-infiniband-work-around-gcc-slub-problem.patch

Unneeded

-console-keyboard-events-and-accessibility-fix.patch -console-keyboard-events-and-accessibility-fix-2.patch

Folded into console-keyboard-events-and-accessibility.patch

-first-stab-at-elantech-touchpad-driver-for-26226-testers.patch -first-stab-at-elantech-touchpad-driver-for-26226-testers-fix.patch

I forget what happened to this

+git-jg-misc-powernow-fix.patch

Fix git-jg-misc

-git-kbuild-fixup.patch

Unneeded

+drivers-ata-libata-ehc-fix-printk-warning.patch

git-libata-all fix

+ide-atiixp-sb700-2-ide-channels.patch +ide-hpt366-mwdma-filter-for-sata-cards-take-2.patch +ide-ide-make-jmicron-match-vendor-and-device-class.patch +ide-ide_platform-set-hwif-chipset.patch +ide-ide-fix-ide-register-hw-to-check-hwif-io_ports.patch +ide-icside-use-ec-dma-directly.patch +ide-ide-remove-write-only-hwif-hw.patch +ide-au1xxx-ide-set-autotune-and-no-io-32bit-also-for-the-slave-device.patch +ide-dtc2278-set-pio-mask-also-for-the-second-port.patch +ide-via82cxxx-keep-local-ide-pci-device-t-copy.patch +ide-ide-replace-ide-pci-device-by-struct-ide-port-info.patch +ide-ide-constify-struct-ide-port-info.patch +ide-ali14xx-fix-deadlock-on-error-handling.patch +ide-dtc2278-fix-deadlock-on-error-handling.patch +ide-qd65xx-fix-deadlock-on-error-handling.patch +ide-opti621-fix-deadlock-on-error-handling.patch +ide-slc90e66-fix-deadlock-on-error-handling.patch +ide-cmd640-fix-deadlock-on-error-handling.patch +ide-ht6560b-fix-deadlock-on-error-handling.patch +ide-ide-take-ide-lock-for-prefetch-disable-enable-in-do-special.patch +ide-cs5530-remove-needless-ide-lock-taking.patch +ide-ide-enhance-ide-setup-pci-noise.patch +ide-ide-use-__ide_end_request-in-ide_end_dequeued_request.patch +ide-ide-remove-dead-code-from-ide-driveid-update.patch +ide-ide-remove-stale-comments-from-ide-taskfile-c.patch +ide-fix-ide-ide-hook-acpi-psx-method-to-ide-power-on-off.patch +ide-fix-ide-ide-remove-ide-dma-check.patch +ide-ide-unexport-noautodma.patch +ide-ide-pci-bmdma-initialization-fixes-take-2.patch +ide-qd65xx-remove-pointless-qd-read-write-reg-take-2.patch

IDE tree updates (breaks m68k)

+git-mtd-fixup.patch
+git-mtd-borkage.patch
+mtd-alaudac-warning-fix.patch

Fix git-mtd.patch

+ircomm-discovery-indication-simplification.patch
+git-net-fix-qeth_main.patch

Fix git-net.patch

+git-nfsd-fixup.patch

Fix rejects in git-nfsd.patch

-git-r8169-fixup.patch

Unneeded

+gregkh-pci-msi-use-correct-data-offset-for-32-bit-msi-in-read_msi_msg.patch +gregkh-pci-pci-fix-ide-legacy-mode-resources.patch +gregkh-pci-pci-implement-pci-noaer.patch +gregkh-pci-pci-use-size-stored-in-proc_dir_entry-for-proc-bus-files.patch +gregkh-pci-pci-write-file-size-to-inode-on-proc-bus-file-write.patch +gregkh-pci-pci-remove-transparent-bridge-sizing.patch +gregkh-pci-pci-skip-isa-ioresource-alignment-on-some-systems.patch +gregkh-pci-pci-avoid-p2p-prefetch-window-for-expansion-roms.patch +gregkh-pci-pci-use-_crs-for-pci-resource-allocation.patch

PCI tree updates

+git-jg-misc-vs-gregkh-pci-pci-skip-isa-ioresource-alignment-on-some-systems.patch

greg-vs-jeff cagematch

+qla2xxx-printk-fixes.patch

Fix git-scsi-misc

+initio-fix-conflict-when-loading-driver.patch

scsi fix

+git-block-fixup-1.patch
+git-block-fixup-fix.patch
+git-block-borkages.patch
+git-block-s390-fix.patch

Fix git-block.patch some more

+gregkh-usb-usb-r8a66597-hcd-fix-class-or-vendor-request.patch +gregkh-usb-usb-r8a66597-hcd-fix-endian-problem.patch +gregkh-usb-usb-r8a66597-hcd-fix-driver-removing.patch +gregkh-usb-usb-fix-gregkh-usb-usb-sisusb2vga-convert-printk-to-dev_-macros.patch +gregkh-usb-usb-gadget-ether-prevent-oops-caused-by-error-interrupt-race.patch +gregkh-usb-usb-drivers-usb-misc-sisusbvga-sisusbc-kill-two-unused-variables.patch +gregkh-usb-usb-serial-gadget-disable-endpoints-on-unload.patch +gregkh-usb-usb-export-urb-statistics-for-powertop.patch +gregkh-usb-usb-move-linux-usb_gadgeth-to-linux-usb-gadgeth.patch +gregkh-usb-usb-re-remove-linux-usb_sl811h.patch +gregkh-usb-usb-unusual_devs-entry-for-nikon-dsc-d2xs.patch +gregkh-usb-usb-visor-termios-bits.patch +gregkh-usb-usb-funsoft-fix-termios.patch

USB tree updates

+git-wireless-ath5k-broke.patch

ath5k broke somehow, probably a marge glitch

+x86_64-mm-prefetch-builtin.patch
+x86_64-mm-remove-serialize-cpu.patch
-x86_64-mm-unwinder.patch
-x86_64-mm-unwinder-default.patch -x86_64-mm-fix-arch-i386-kernel-nmi_c-unknown_nmi_panic_callback-declared-static-but-never-defined-warning.patch -x86_64-mm-less-stack-alignment.patch
+x86_64-mm-remove-unordered-io.patch
+x86_64-mm-make-atomic64_t-work-like-atomic_t.patch
+x86_64-mm-remove-strrchr.patch -x86_64-mm-optionally-show-last-exception-from-to-register-contents-v2.patch +x86_64-mm-optionally-show-last-exception-from-to-register-contents.patch -x86_64-mm-remove-fpu-port.patch
+x86_64-mm-fix-watchdog.patch
+x86_64-mm-mark-read_crx-asm-code-as-volatile.patch +x86_64-mm-call-free_init_pages-with-irqs-enabled-in-alternative_instructions.patch +x86_64-mm-ptrace-compat-tls.patch

x86 tree changes

+fix-x86_64-mm-sched-clock-share.patch

x86 stuff

-x86-use-num_online_nodes-to-get-physical-cpus-numbers-for.patch -voyager-include-asm-smph-to-fix-compile-error.patch -hpet-force-enable-on-ich34.patch

Dropped, I think

-x86_64-cleanup-apic-c-fix.patch

Folded into x86_64-cleanup-apic-c.patch

-ich-force-hpet-ich7-or-later-quirk-to-force-detect-enable-fix.patch

Folded into ich-force-hpet-ich7-or-later-quirk-to-force-detect-enable.patch

-ich-force-hpet-ich5-quirk-to-force-detect-enable-fix.patch

Folded into ich-force-hpet-ich5-quirk-to-force-detect-enable.patch

-optimize-x86-page-faults-like-all-other-achitectures-and-kill-notifier-cruft-fix.patch

Fix optimize-x86-page-faults-like-all-other-achitectures-and-kill-notifier-cruft.patch

-x86_64-check-and-enable-mmconfig-for-amd-family-10h-opteron-fix.patch

Folded into x86_64-check-and-enable-mmconfig-for-amd-family-10h-opteron.patch

-x86_64-set-cfg_size-for-amd-family-10h-in-case-mmconfig-is-fix.patch

Folded into x86_64-set-cfg_size-for-amd-family-10h-in-case-mmconfig-is.patch

+pci-use-pci=bfsort-for-hp-dl385-g2-dl585-g2.patch

PCI fix

+git-kgdb-be-modern.patch
+disable-kgdb-on-ppc.patch

kgdb fixes

+mm-use-pagevec-to-rotate-reclaimable-page-fix-bug-at-include-linux-mmh220.patch +mm-use-pagevec-to-rotate-reclaimable-page-kill-redundancy-in-rotate_reclaimable_page.patch +mm-use-pagevec-to-rotate-reclaimable-page-move_tail_pages-into-lru_add_drain.patch

Fix mm-use-pagevec-to-rotate-reclaimable-page.patch a lot more

-have-kswapd-keep-a-minimum-order-free-other-than-order-0.patch -only-check-absolute-watermarks-for-alloc_high-and-alloc_harder-allocations.patch -slub-exploit-page-mobility-to-increase-allocation-order.patch -slub-reduce-antifrag-max-order.patch

Dropped

+memory-unplug-v7-memory-hotplug-cleanup-fix.patch

Fix memory-unplug-v7-memory-hotplug-cleanup.patch

+hugetlb-move-update_and_free_page.patch +hugetlb-try-to-grow-hugetlb-pool-for-map_private-mappings.patch +hugetlb-try-to-grow-hugetlb-pool-for-map_shared-mappings.patch +hugetlb-add-hugetlb_dynamic_pool-sysctl.patch +hugetlbfs-read-support-fix-2-fix.patch +hugetlb-fix-pool-resizing-corner-case-v2.patch

Various hugetlb things

-mm-expose-bdi-statistics-in-sysfs.patch -debug-sysfs-files-for-the-current-ratio-size-total.patch

Dropped

+mm-document-tree_lock-zonelock-lockorder.patch +writeback-dont-propagate-aop_writepage_activate.patch

MM things

+pm-qos-infrastructure-and-interface.patch +pm-qos-infrastructure-and-interface-fix.patch +pm-qos-infrastructure-and-interface-vs-git-acpi.patch +pm-qos-infrastructure-and-interface-vs-git-acpi-2.patch +latencyc-use-qos-infrastructure.patch

PM QoS interface

+uml-correctly-handle-skb-allocation-failures.patch +uml-correctly-handle-skb-allocation-failures-fix.patch +uml-fix-stub-address-calculations.patch +uml-fix-stub-address-calculations-checkpatch-fixes.patch +uml-arch-um-drivers-formatting.patch +uml-arch-um-drivers-formatting-checkpatch-fixes.patch +uml-definitively-kill-subprocesses-on-panic.patch

UML updates

-clone-flag-clone_parent_tidptr-leaves-invalid-results-in-memory.patch

Dropped

-cache-pipe-buf-page-address-for-non-highmem-arch.patch

Dropped

+add-kernel-notifierc-fix-2-fix-3.patch

Fix add-kernel-notifierc.patch some more

-x86_64-efi-boot-support-efi-frame-buffer-driver.patch -x86_64-efi-boot-support-efi-boot-document.patch

Dropped

-i386-and-x86_64-randomize-brk.patch
-i386-and-x86_64-randomize-brk-fix.patch

Dropped

-track-accurate-idle-time-with-tick_schedidle_sleeptime.patch -track-accurate-idle-time-with-tick_schedidle_sleeptime-fix.patch

I forget
-jbd-slab-cleanups.patch
-jbd-slab-cleanups-2.patch
-jbd-slab-cleanups-3.patch -move-kasprintfo-to-obj-y.patch -anon_inodesc-fix-error-check-in-anon_inode_getfd.patch -jbd2-ext4-cleanups-convert-to-kzalloc.patch -jbd2-fix-commit-code-to-properly-abort-journal.patch -remove-broken-netfilter-binary-sysctls-from-bridging-code.patch -fs-locksc-use-list_for_each_entry-instead-of-list_for_each.patch -i386-cpuid-misc-cpuinit-annotations.patch -cleanup-macros-for-distinguishing-mandatory-locks.patch -gfs2-cleanup-explicit-check-for-mandatory-locks.patch -9pfs-cleanup-explicit-check-for-mandatory-locks.patch -afs-cleanup-explicit-check-for-mandatory-locks.patch -nfs-cleanup-explicit-check-for-mandatory-locks.patch -rework-proc-locks-via-seq_files-and-seq_list-helpers.patch -rework-proc-locks-via-seq_files-and-seq_list-helpers-fix.patch -rework-proc-locks-via-seq_files-and-seq_list-helpers-fix-2.patch -funsoft-fix-termios.patch
-visor-termios-bits.patch

-futex_compat-simplify-pointer-magic.patch -futex_compat-update-to-match-native-version.patch

Dropped, I think

+stop-using-dma_xxbit_mask.patch
+stop-using-dma_xxbit_mask-fix.patch

Cleanups

+increase-at_vector_size-to-terminate-saved_auxv-properly-updates.patch

Fix increase-at_vector_size-to-terminate-saved_auxv-properly.patch

+anon-inodes-use-open-coded-atomic_inc-for-the-shared-inode.patch +ncr53c8xx-remove-deprecated-irq-flags-sa_.patch +completely-remove-deprecated-irq-flags-sa_.patch +compile-handle_percpu_irq-even-for-uniprocessor-kernels.patch +fs-correct-sus-compliance-for-open-of-large-file-without.patch +ext3-remove-ifdef-config_ext3_index.patch +rename-signalfd_siginfo-fields.patch +break-elf_platform-and-stack-pointer-randomization-dependency.patch +spin_lock_unlocked-cleanups.patch +task_struct-move-fpu_counter-and-oomkilladj.patch +f_dupfd_cloexec-implementation.patch +f_dupfd_cloexec-implementation-fix-2.patch +module-return-error-when-mod_sysfs_init-failed.patch +ext3-lighten-up-resize-transaction-requirements.patch +ext3-lighten-up-resize-transaction-requirements-checkpatch-fixes.patch +printk-add-kern_cont-annotation.patch +lp_console-cleanups.patch +reiserfs-do-not-repair-wrong-journal-params.patch +dontdiff-update-based-on-gitignore-updates.patch

Misc

+writeback-fix-time-ordering-of-the-per-superblock-inode-lists-8.patch +writeback-fix-ntfs-with-sb_has_dirty_inodes.patch +writeback-remove-pages_skipped-accounting-in-__block_write_full_page.patch +writeback-remove-pages_skipped-accounting-in-__block_write_full_page-fix.patch +writeback-introduce-writeback_controlmore_io-to-indicate-more-io.patch +writeback-remove-unnecessary-wait-in-throttle_vm_writeout.patch

More VFS writeback fixes

+spi_mpc83xx-handles-other-processors-with.patch +documentation-spi-spidev_testc-constify-some-variables.patch

SPI updates

+lockdep-annotate-kprobes-irq-fiddling.patch
+lockdep-annotate-kprobes-irq-fiddling-fix.patch

lockdep+kprobes fixes

+ecryptfs-fix-error-handling.patch

ecryptfs update

+rtc-rtc-class-driver-for-the-ds1374.patch +rtc-fix-readback-from-sys-class-rtc-rtc-wakealarm.patch +rtc-cmos-probe-cleanup.patch +rtc-cmos-probe-cleanup-checkpatch-fixes.patch

RTC updates

+vt-vgacon-check-if-screen-resize-request-comes-from-userspace.patch +nvidiafb-correctly-assign-the-i2c-class-with-the-port-reversal.patch +pmagb-b-fb-improve-diagnostics.patch +fbcon-logo-disable-logo-at-boot.patch +fbcon-logo-disable-logo-at-boot-fix.patch +bf54x-lq043fb-framebuffer-driver-for-blackfin-bf54x-framebuffer-device-driver.patch +video-gfx-merge-kconfig-menus.patch +ps3av-eliminate-unneeded-temporary-variables.patch +ps3av-eliminate-ps3av_debug.patch +ps3av-use-ps3-video-mode-ids-in-autodetect-code.patch +ps3av-treat-dvi-d-like-hdmi-in-autodetect.patch +ps3av-add-autodetection-for-vesa-modes.patch +ps3av-add-quirk-database-for-broken-monitors.patch +ps3av-remove-unused-ps3av_set_mode.patch +ps3av-dont-distinguish-between-boot-and-non-boot-autodetection.patch +imxfb-fast-read-flag-and-nonstandard-field-configurable.patch

More fbdev updates

-md-software-raid-autodetect-dev-list-not-array-fix.patch

Folded into md-software-raid-autodetect-dev-list-not-array.patch

+do-cpu_dead-migrating-under-read_locktasklist-instead-of-write_lock_irqtasklist-fix.patch

Fix do-cpu_dead-migrating-under-read_locktasklist-instead-of-write_lock_irqtasklist.patch

+intel-iommu-fix-for-iommu-early-crash-2.patch
+git-block-intel-iommu-sg-chaining-support.patch

intl-iommu fixes

+ext4-jbd_slab_cleanup.patch
+ext4-jbd2_slab_cleanup.patch +ext4-jbd_jbd_kmalloc_cleanup.patch +ext4-jbd2_jbd_kmalloc_cleanup.patch +ext4-jbd2-ext4-cleanups-convert-to-kzalloc.patch +ext4-jbd2-fix-commit-code-to-properly-abort-journal.patch +ext4-jbd2-debug-code-cleanup.patch +ext4-remove-ifdef-config_ext4_index.patch +ext4-ext4-convert_bg_block_bitmap_to_bg_block_bitmap_lo.patch +ext4-ext4-convert_bg_inode_bitmap_and_bg_inode_table.patch +ext4-ext4-convert_s_blocks_count_to_s_blocks_count_lo.patch +ext4-ext4-convert_s_r_blocks_count_and_s_free_blocks_count.patch +ext4-ext4-convert_ext4_extentee_start_to_ext4_extentee_start_lo.patch +ext4-ext4-convert_ext4_extent_idxei_leaf_to_ext4_extent_idxei_leaf_lo.patch +ext4-ext4-sparse-fix.patch +ext4-ext4_fix_setup_new_group_blocks_locking.patch +ext4-ext4_lighten_up_resize_transaction_requirements.patch +ext4-jbd-stats-through-procfs.patch -ext4-jbd-stats-through-procfs.patch -ext4-jbd-stats-through-procfs_fix.patch -ext4-fs-jbd2-journalc-kmalloc-memset-conversion-to-kzalloc.patch -ext4-new-extent-function.patch
+ext4-new-extent-function.patch +ext4-mballoc-bug-workaround.patch +ext4-jbd-blocks-reservation-fix-for-large-blk.patch +ext4-jbd2-blocks-reservation-fix-for-large-blk.patch

ext4 devel tree updates

+jbd-ext3-cleanups-convert-to-kzalloc.patch +jbd-config_jbd_debug-cannot-create-proc-entry.patch +jbd-config_jbd_debug-cannot-create-proc-entry-fix.patch +jbd-fix-commit-code-to-properly-abort-journal.patch +jbd-fix-jbd-warnings-when-compiling-with-config_jbd_debug.patch

ext3/4 things

+pnp-remove-null-pointer-checks.patch +pnp-simplify-pnp-card-error-handling.patch +pnp-use-dev_info-dev_err-etc-in-core.patch +pnp-use-dev_info-dev_err-etc-in-core-fix.patch +pnp-use-dev_info-dev_err-etc-in-core-fix-fix.patch +pnp-use-dev_info-in-system-driver.patch +pnp-simplify-pnpbios-insert_device.patch +pnp-add-debug-message-for-adding-new-device.patch +pnp-add-debug-message-for-adding-new-device-fix.patch +pnp-add-debug-message-for-adding-new-device-fix-fix.patch

pnp updates

+make-reiserfs-stop-using-struct-file-for-internal.patch

reiserfs cleanup

+tweak-documentation-sm501txt.patch +add-missing-entries-to-top-level-documentation-00-index.patch +add-documentation-w1w1-masters-00-index.patch +add-entries-to-documentation-powerpc.patch +add-documentation-power-00-index.patch +update-dma-mapping-documentation.patch +kdump-documentation-cleanups.patch +vmtxt-document-min_free_pages-as-critical-for-correctness.patch +documentation-vm-slabinfoc-clean-up-this-code.patch

Documentation updates

+make-access-to-tasks-nsproxy-lighter-update-get_net_ns_by_pid.patch

Fix make-access-to-tasks-nsproxy-lighter.patch some more

+lockdep-fix-mismatched-lockdep_depth-curr_chain_hash.patch +lockdep-fix-mismatched-lockdep_depth-curr_chain_hash-checkpatch-fixes.patch

lockdep fixes

+cpuset-sched_load_balance-flag.patch +cpuset-sched_load_balance-flag-fix.patch +cpusets-decrustify-cpuset-mask-update-code.patch +cpusets-decrustify-cpuset-mask-update-code-checkpatch-fixes.patch

cpuset updates

+memcontrol-move-oom-task-exclusion-to-tasklist.patch +memcontrol-move-oom-task-exclusion-to-tasklist-fix.patch +oom-add-sysctl-to-enable-task-memory-dump.patch +kswapd-should-only-wait-on-io-if-there-is-io.patch

memory controller and other MM updates

+powerpc-add-scaled-time-accounting-speedup.patch

Improve powerpc-add-scaled-time-accounting.patch

+use-task_pid_nr-instead-of-pid_nrtask_pid.patch

pid namespaces updates

+cpu-hotplug-avoid-hotadd-when-proper-possible_map-isnt-specified.patch +cpu-hotplug-avoid-hotadd-when-proper-possible_map-isnt-specified-checkpatch-fixes.patch

CPU hotplug updates

+fix-idr_find-locking.patch
+ipc-remove-unneeded-parameters.patch

IDR/IPC updates

+ext3-support-large-blocksize-up-to-pagesize.patch

ext3 feature/fix

+hook-up-group-scheduler-with-control-groups.patch +hook-up-group-scheduler-with-control-groups-fix.patch

make sched container-aware

+change-struct-marker-users.patch +combine-instrumentation-menus-in-kernel-kconfiginstrumentation.patch +linux-kernel-markers.patch +linux-kernel-markers-checkpatch-fixes.patch +linux-kernel-markers-coding-style-fixes.patch +linux-kernel-markers-alignment-fix.patch +add-samples-subdir.patch +linux-kernel-markers-samples.patch +linux-kernel-markers-samples-checkpatch-fixes.patch +linux-kernel-markers-samples-coding-style-fix.patch +linux-kernel-markers-samples-remove-asm.patch +linux-kernel-markers-documentation.patch

Linux kernel markers

+kernel-forkc-remove-unneeded-variable-initialization-in-copy_process.patch +uninline-forkc-exitc.patch +uninline-forkc-exitc-checkpatch-fixes.patch

cleanups/tweaks

+fuse-fix-allowing-operations.patch +fuse-fix-race-between-getattr-and-write.patch +fuse-fix-race-between-getattr-and-write-checkpatch-fixes.patch +fuse-add-file-handle-to-getattr-operation.patch +fuse-add-file-handle-to-getattr-operation-checkpatch-fixes.patch +fuse-clean-up-open-file-passing-in-setattr.patch +vfs-allow-filesystems-to-implement-atomic-opentruncate.patch +fuse-improve-utimes-support.patch +fuse-add-atomic-opentruncate-support.patch +fuse-support-bsd-locking-semantics.patch +fuse-add-list-of-writable-files-to-fuse_inode.patch +fuse-add-helper-for-asynchronous-writes.patch +fuse-add-support-for-mandatory-locking.patch +fuse-add-blksize-field-to-fuse_attr.patch

FUSE updates

+sparse-pointer-use-of-zero-as-null.patch +sparse-pointer-use-of-zero-as-null-checkpatch-fixes.patch +replace-__attribute_pure__-with-__pure.patch

cleanups

+reiser4-fix-null-dereference-in-__mnt_is_readonly-in-ftruncate.patch +reiser4-do-not-allocate-struct-file-on-stack.patch

reiser4 updates

-check_dirty_inode_list.patch

Dropped

6626 commits in 2239 patch files

All patches:

ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.23/2.6.23-mm1/patch-list

KAMEZAWA Hiroyuki

2007-10-12 05:01 UTC #1 lore raw

Quoted 6 lines · On Thu, 11 Oct 2007 21:31:26 -0700 Andrew Morton <[email protected]>…

ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.23/2.6.23-mm1/
- I've been largely avoiding applying anything since rc8-mm2 in an attempt to stabilise things for the 2.6.23 merge.

On RHEL5/x86_64 environment,

==
[kamezawa@hannibal ref-2.6.23-mm1]$ make menuconfig
Makefile:456: /home/kamezawa/ref-2.6.23-mm1/arch//Makefile: No such file or directory
make: *** No rule to make target `/home/kamezawa/ref-2.6.23-mm1/arch//Makefile'. Stop. ==

$(ARCH) cannot be detected automatically...

What information is useful for fixing this ?

Thanks,
-Kame

Andrew Morton

author maintainer

2007-10-12 06:42 UTC #2 lore raw

Quoted 11 lines · On Fri, 12 Oct 2007 14:03:28 +0900 KAMEZAWA Hiroyuki…

Quoted 6 lines · On Thu, 11 Oct 2007 21:31:26 -0700 Andrew Morton <[email protected]>…
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.23/2.6.23-mm1/
- I've been largely avoiding applying anything since rc8-mm2 in an attempt to stabilise things for the 2.6.23 merge.
On RHEL5/x86_64 environment,

Quoted 7 lines

==
[kamezawa@hannibal ref-2.6.23-mm1]$ make menuconfig
Makefile:456: /home/kamezawa/ref-2.6.23-mm1/arch//Makefile: No such file or directory
make: *** No rule to make target `/home/kamezawa/ref-2.6.23-mm1/arch//Makefile'. Stop. ==
$(ARCH) cannot be detected automatically...

So you need to set $ARCH by hand? I always do that so I didn't notice this.

Quoted 1 line

What information is useful for fixing this ?

Sam's email address ;)

Al Viro

2007-10-12 06:47 UTC #3 lore raw

Quoted 19 lines · Andrew Morton

Quoted 17 lines · On Fri, 12 Oct 2007 14:03:28 +0900 KAMEZAWA Hiroyuki…
Quoted 6 lines · On Thu, 11 Oct 2007 21:31:26 -0700 Andrew Morton <[email protected]>…
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.23/2.6.23-mm1/
- I've been largely avoiding applying anything since rc8-mm2 in an attempt to stabilise things for the 2.6.23 merge.
On RHEL5/x86_64 environment,
==
[kamezawa@hannibal ref-2.6.23-mm1]$ make menuconfig
Makefile:456: /home/kamezawa/ref-2.6.23-mm1/arch//Makefile: No such file or directory
make: *** No rule to make target `/home/kamezawa/ref-2.6.23-mm1/arch//Makefile'. Stop. ==

Quoted 7 lines

Quoted 1 line
$(ARCH) cannot be detected automatically...
So you need to set $ARCH by hand? I always do that so I didn't notice this.
Quoted 1 line
What information is useful for fixing this ?
Sam's email address ;)

More serious breakage happened to UML - include/asm-um/arch went straight to hell; I'll look into fixing that tomorrow...

Andrew Morton

author maintainer

2007-10-12 07:13 UTC #4 lore raw

Quoted 22 lines · On Fri, 12 Oct 2007 07:46:58 +0100 Al Viro <[email protected]> wrote:

Quoted 21 lines · Andrew Morton
Quoted 18 lines · On Fri, 12 Oct 2007 14:03:28 +0900 KAMEZAWA Hiroyuki…
Quoted 6 lines · On Thu, 11 Oct 2007 21:31:26 -0700 Andrew Morton <[email protected]>…
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.23/2.6.23-mm1/
- I've been largely avoiding applying anything since rc8-mm2 in an attempt to stabilise things for the 2.6.23 merge.
On RHEL5/x86_64 environment,
==
[kamezawa@hannibal ref-2.6.23-mm1]$ make menuconfig
Makefile:456: /home/kamezawa/ref-2.6.23-mm1/arch//Makefile: No such file or directory
make: *** No rule to make target `/home/kamezawa/ref-2.6.23-mm1/arch//Makefile'. Stop. ==
$(ARCH) cannot be detected automatically...

Quoted 8 lines

Quoted 5 lines
So you need to set $ARCH by hand? I always do that so I didn't notice this.
Quoted 1 line
What information is useful for fixing this ?
Sam's email address ;)
More serious breakage happened to UML - include/asm-um/arch went straight to hell; I'll look into fixing that tomorrow...

I always forget to test uml. But a quick test build seems to work until it hits this:

arch/um/drivers/slip_kern.c: In function 'slip_init':
arch/um/drivers/slip_kern.c:34: error: 'struct net_device' has no member named 'header_cache_update' arch/um/drivers/slip_kern.c:35: error: 'struct net_device' has no member named 'hard_header_cache' arch/um/drivers/slip_kern.c:36: error: 'struct net_device' has no member named 'hard_header'

Stephen Hemminger

2007-10-12 18:06 UTC #5 lore raw

PATCH 1/1 uml: hard_header fix

Fix hard_header for net-2.6 (2.6.23-mm1).

Please test this patch, unfortunately the tree it came from won't build UML, so it isn't possible to give it a proper check.

Signed-off-by Stephen Hemminger <[email protected]>

arch/um/drivers/slip_kern.c +1 -3

@@ -30,9 +30,7 @@ void slip_init(struct net_device *dev, v
 	slip_proto_init(&spri->slip);
 
 	dev->init = NULL;
-	dev->header_cache_update = NULL;
-	dev->hard_header_cache = NULL;
-	dev->hard_header = NULL;
+	dev->hard_header_ops = NULL;
 	dev->hard_header_len = 0;
 	dev->addr_len = 0;
 	dev->type = ARPHRD_SLIP;

arch/um/drivers/slirp_kern.c +1 -3

@@ -31,9 +31,7 @@ void slirp_init(struct net_device *dev, 
 
 	dev->init = NULL;
 	dev->hard_header_len = 0;
-	dev->header_cache_update = NULL;
-	dev->hard_header_cache = NULL;
-	dev->hard_header = NULL;
+	dev->hard_header_ops = NULL;
 	dev->addr_len = 0;
 	dev->type = ARPHRD_SLIP;
 	dev->tx_queue_len = 256;

Al Viro

2007-10-12 19:04 UTC #6 lore raw

In reply to Andrew Morton

Quoted 7 lines · Andrew Morton

I always forget to test uml. But a quick test build seems to work until it hits this:
arch/um/drivers/slip_kern.c: In function 'slip_init':
arch/um/drivers/slip_kern.c:34: error: 'struct net_device' has no member named 'header_cache_update' arch/um/drivers/slip_kern.c:35: error: 'struct net_device' has no member named 'hard_header_cache' arch/um/drivers/slip_kern.c:36: error: 'struct net_device' has no member named 'hard_header'

Umm... Dies much faster here:
include/asm-um/arch:
@echo ' SYMLINK $@'
ifneq ($(KBUILD_SRC),)

        $(Q)mkdir -p $(objtree)/include/asm-um
        $(Q)ln -fsn $(srctree)/include/asm-$(SUBARCH) include/asm-um/arch
else
        $(Q)cd $(TOPDIR)/include/asm-um && ln -sf ../asm-$(SUBARCH) arch

endif
gives a symlink from include/asm-um/arch to include/asm-i386 or include/asm-x86_64, so e.g.
#ifndef __UM_POSIX_TYPES_H
#define __UM_POSIX_TYPES_H

#include "asm/arch/posix_types.h"

#endif
in asm-um/posix_types.h blows instantly. Try to build on a tree without stale symlinks...

Mathieu Desnoyers

2007-10-12 19:47 UTC #7 lore raw

Re: 2.6.23-mm1 thread exit_group issue

In reply to Andrew Morton

Hi Andrew,

I noticed a regression between 2.6.23-rc8-mm2 and 2.6.23-mm1 (with your hotfixes). User space threads seems to receive a ERESTART_RESTARTBLOCK as soon as a thread does a pthread_join on them. The previous behavior was to wait for them to exit by taking a futex.

I provide a toy program that shows the problem. On 2.6.23-rc8-mm2, it loops forever (as it should). On 2.6.23-mm1, it exits after 10 seconds.

Any idea on what may cause this problem ?

(I also provide complete ptrace -f of a correct and buggy run and my kernel config. Tests were done on i386.)

Mathieu

/*
* Thread testing
*
* build with gcc -lpthread -o pthread pthread.c
*
* Mathieu Desnoyers
* License: GPL
*/

#include <stdio.h>
#include <pthread.h>
#include <stdlib.h>
#include <sys/types.h>
#include <sys/wait.h>
#include <unistd.h>
#include <stdio.h>
#include <signal.h>

static int __thread test = 0;

/* signal handler */
void handler(int signo)

{
	printf("Sig handler : TID %lu, pid : %lu\n", pthread_self(), getpid());
}

void *thr1(void *arg)

{
	test = 1;
	
	while(1) {
		printf("thread 1, thread id : %lu, pid %lu, test %d\n",
				pthread_self(), getpid(), test);
		sleep(2);
	}
	return ((void*)1);

}

void *thr2(void *arg)

{
	while(1) { 
		printf("thread 2, thread id : %lu, pid %lu, test %d\n",
				pthread_self(), getpid(), test);
		sleep(2);
	}
	return ((void*)2);
}

int main()

{
	int err;
	pthread_t tid1, tid2;
	void *tret;
	static struct sigaction act;

	act.sa_handler = handler;
	sigemptyset(&(act.sa_mask));
	sigaddset(&(act.sa_mask), SIGUSR1);
	sigaction(SIGUSR1, &act, NULL);

	err = pthread_create(&tid1, NULL, thr1, NULL);
	if (err != 0)
		exit(1);

	err = pthread_create(&tid2, NULL, thr2, NULL);
	if (err != 0)
		exit(1);

	sleep(10);

	err = pthread_join(tid1, &tret);
	if (err != 0)
		exit(1);

	err = pthread_join(tid2, &tret);
	if (err != 0)
		exit(1);

	return 0;
}

---------------
strace -f ./pthread 2>pthread-2.6.23-mm1.txt (buggy)

execve("./pthread", ["./pthread"], [/* 28 vars */]) = 0
brk(0) = 0x804a000
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory)
mmap2(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7f0d000
access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory)
open("/etc/ld.so.cache", O_RDONLY) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=137930, ...}) = 0
mmap2(NULL, 137930, PROT_READ, MAP_PRIVATE, 3, 0) = 0xb7eeb000

close(3)                                = 0
access("/etc/ld.so.nohwcap", F_OK)      = -1 ENOENT (No such file or directory)
open("/lib/libpthread.so.0", O_RDONLY)  = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0pG\0\000"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0755, st_size=108045, ...}) = 0
mmap2(NULL, 90592, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7ed4000
mmap2(0xb7ee7000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x12) = 0xb7ee7000
mmap2(0xb7ee9000, 4576, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0xb7ee9000
close(3)                                = 0
access("/etc/ld.so.nohwcap", F_OK)      = -1 ENOENT (No such file or directory)
open("/lib/libc.so.6", O_RDONLY)        = 3

read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\260a\1"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0755, st_size=1335912, ...}) = 0
mmap2(NULL, 1340944, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7d8c000
mmap2(0xb7ece000, 12288, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x142) = 0xb7ece000
mmap2(0xb7ed1000, 9744, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0xb7ed1000
close(3) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7d8b000
set_thread_area({entry_number:-1 -> 6, base_addr:0xb7d8bac0, limit:1048575, seg_32bit:1, contents:0, read_exec_only:0, limit_in_pages:1, seg_not_present:0, useable:1}) = 0

mprotect(0xb7ece000, 4096, PROT_READ)   = 0
munmap(0xb7eeb000, 137930)              = 0
set_tid_address(0xb7d8bb08)             = 3725

sendto(-1210533104, umovestr: Input/output error
0xc, 3085860852, MSG_EOR|MSG_ERRQUEUE|MSG_DONTWAIT|MSG_CONFIRM|MSG_FIN|MSG_RST|MSG_MORE|0xb7d80000, NULL, 3214023664) = 0 rt_sigaction(SIGRTMIN, {0xb7ed82a0, [], SA_SIGINFO}, NULL, 8) = 0
rt_sigaction(SIGRT_1, {0xb7ed8320, [], SA_RESTART|SA_SIGINFO}, NULL, 8) = 0 rt_sigprocmask(SIG_UNBLOCK, [RTMIN RT_1], NULL, 8) = 0
getrlimit(RLIMIT_STACK, {rlim_cur=8192*1024, rlim_max=RLIM_INFINITY}) = 0
uname({sys="Linux", node="dijkstra", ...}) = 0
rt_sigaction(SIGUSR1, {0x8048604, [USR1], 0}, NULL, 8) = 0
mmap2(NULL, 8388608, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb758b000

brk(0)                                  = 0x804a000
brk(0x806b000)                          = 0x806b000
mprotect(0xb758b000, 4096, PROT_NONE)   = 0

clone(Process 3726 attached (waiting for parent)
Process 3726 resumed (parent 3725 ready)
child_stack=0xb7d8a4c4, flags=CLONE_VM|CLONE_FS|CLONE_FILES|CLONE_SIGHAND|CLONE_THREAD|CLONE_SYSVSEM|CLONE_SETTLS|CLONE_PARENT_SETTID|CLONE_CHILD_CLEARTID, parent_tidptr=0xb7d8abd8, {entry_number:6, base_addr:0xb7d8ab90, limit:1048575, seg_32bit:1, contents:0, read_exec_only:0, limit_in_pages:1, seg_not_present:0, useable:1}, child_tidptr=0xb7d8abd8) = 3726 [pid 3726] sendto(-1210536992, umovestr: Input/output error
0xc, 3085860852, 0, ptrace: umoven: Input/output error
{...}, 3084428488 <unfinished ...>

[pid  3725] mmap2(NULL, 8388608, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0 <unfinished ...>
[pid  3726] <... sendto resumed> )      = 0
[pid  3725] <... mmap2 resumed> )       = 0xb6d8b000
[pid  3726] fstat64(1,  <unfinished ...>
[pid  3725] mprotect(0xb6d8b000, 4096, PROT_NONE <unfinished ...>
[pid  3726] <... fstat64 resumed> {st_mode=S_IFCHR|0620, st_rdev=makedev(136, 2), ...}) = 0
[pid  3725] <... mprotect resumed> )    = 0
[pid  3726] mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0 <unfinished ...>
[pid  3725] clone( <unfinished ...>
[pid  3726] <... mmap2 resumed> )       = 0xb7f0c000
Process 3727 attached
[pid  3725] <... clone resumed> child_stack=0xb758a4c4, flags=CLONE_VM|CLONE_FS|CLONE_FILES|CLONE_SIGHAND|CLONE_THREAD|CLONE_SYSVSEM|CLONE_SETTLS|CLONE_PARENT_SETTID|CLONE_CHILD_CLEARTID, parent_tidptr=0xb758abd8, {entry_number:6, base_addr:0xb758ab90, limit:1048575, seg_32bit:1, contents:0, read_exec_only:0, limit_in_pages:1, seg_not_present:0, useable:1}, child_tidptr=0xb758abd8) = 3727
[pid  3726] write(1, "thread 1, thread id : 3084430224"..., 51 <unfinished ...>
[pid  3725] rt_sigprocmask(SIG_BLOCK, [CHLD],  <unfinished ...>
[pid  3726] <... write resumed> )       = 51
[pid  3727] sendto(-1218925600, umovestr: Input/output error
0xc, 3085860852, 0, ptrace: umoven: Input/output error
{...}, 3076039880 <unfinished ...>
[pid  3725] <... rt_sigprocmask resumed> [], 8) = 0
[pid  3726] rt_sigprocmask(SIG_BLOCK, [CHLD],  <unfinished ...>
[pid  3727] <... sendto resumed> )      = 0
[pid  3725] rt_sigaction(SIGCHLD, NULL,  <unfinished ...>
[pid  3726] <... rt_sigprocmask resumed> [], 8) = 0
[pid  3727] write(1, "thread 2, thread id : 3076041616"..., 51 <unfinished ...>
[pid  3725] <... rt_sigaction resumed> {SIG_DFL}, 8) = 0
[pid  3726] rt_sigaction(SIGCHLD, NULL,  <unfinished ...>
[pid  3727] <... write resumed> )       = 51
[pid  3725] rt_sigprocmask(SIG_SETMASK, [],  <unfinished ...>
[pid  3726] <... rt_sigaction resumed> {SIG_DFL}, 8) = 0
[pid  3727] rt_sigprocmask(SIG_BLOCK, [CHLD],  <unfinished ...>
[pid  3725] <... rt_sigprocmask resumed> NULL, 8) = 0
[pid  3726] rt_sigprocmask(SIG_SETMASK, [],  <unfinished ...>
[pid  3727] <... rt_sigprocmask resumed> [], 8) = 0
[pid  3725] nanosleep({10, 0},  <unfinished ...>
[pid  3726] <... rt_sigprocmask resumed> NULL, 8) = 0
[pid  3727] rt_sigaction(SIGCHLD, NULL,  <unfinished ...>
[pid  3726] nanosleep({2, 0},  <unfinished ...>
[pid  3727] <... rt_sigaction resumed> {SIG_DFL}, 8) = 0
[pid  3727] rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
[pid  3727] nanosleep({2, 0},  <unfinished ...>
[pid  3726] <... nanosleep resumed> {2, 0}) = 0
[pid  3727] <... nanosleep resumed> {2, 0}) = 0
[pid  3726] write(1, "thread 1, thread id : 3084430224"..., 51 <unfinished ...>
[pid  3727] futex(0xb7ed10d0, FUTEX_WAIT, 2, NULL <unfinished ...>
[pid  3726] <... write resumed> )       = 51
[pid  3726] futex(0xb7ed10d0, FUTEX_WAKE, 1 <unfinished ...>
[pid  3727] <... futex resumed> )       = 0
[pid  3726] <... futex resumed> )       = 1
[pid  3727] write(1, "thread 2, thread id : 3076041616"..., 51 <unfinished ...>
[pid  3726] rt_sigprocmask(SIG_BLOCK, [CHLD],  <unfinished ...>
[pid  3727] <... write resumed> )       = 51
[pid  3727] futex(0xb7ed10d0, FUTEX_WAKE, 1 <unfinished ...>
[pid  3726] <... rt_sigprocmask resumed> [], 8) = 0
[pid  3727] <... futex resumed> )       = 0
[pid  3726] rt_sigaction(SIGCHLD, NULL,  <unfinished ...>
[pid  3727] rt_sigprocmask(SIG_BLOCK, [CHLD],  <unfinished ...>
[pid  3726] <... rt_sigaction resumed> {SIG_DFL}, 8) = 0
[pid  3727] <... rt_sigprocmask resumed> [], 8) = 0
[pid  3726] rt_sigprocmask(SIG_SETMASK, [],  <unfinished ...>
[pid  3727] rt_sigaction(SIGCHLD, NULL,  <unfinished ...>
[pid  3726] <... rt_sigprocmask resumed> NULL, 8) = 0
[pid  3727] <... rt_sigaction resumed> {SIG_DFL}, 8) = 0
[pid  3726] nanosleep({2, 0},  <unfinished ...>
[pid  3727] rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
[pid  3727] nanosleep({2, 0},  <unfinished ...>
[pid  3726] <... nanosleep resumed> {2, 0}) = 0
[pid  3727] <... nanosleep resumed> {2, 0}) = 0
[pid  3726] write(1, "thread 1, thread id : 3084430224"..., 51 <unfinished ...>
[pid  3727] futex(0xb7ed10d0, FUTEX_WAIT, 2, NULL <unfinished ...>
[pid  3726] <... write resumed> )       = 51
[pid  3726] futex(0xb7ed10d0, FUTEX_WAKE, 1 <unfinished ...>
[pid  3727] <... futex resumed> )       = 0
[pid  3726] <... futex resumed> )       = 1
[pid  3727] write(1, "thread 2, thread id : 3076041616"..., 51 <unfinished ...>
[pid  3726] rt_sigprocmask(SIG_BLOCK, [CHLD],  <unfinished ...>
[pid  3727] <... write resumed> )       = 51
[pid  3726] <... rt_sigprocmask resumed> [], 8) = 0
[pid  3727] futex(0xb7ed10d0, FUTEX_WAKE, 1 <unfinished ...>
[pid  3726] rt_sigaction(SIGCHLD, NULL,  <unfinished ...>
[pid  3727] <... futex resumed> )       = 0
[pid  3726] <... rt_sigaction resumed> {SIG_DFL}, 8) = 0
[pid  3727] rt_sigprocmask(SIG_BLOCK, [CHLD],  <unfinished ...>
[pid  3726] rt_sigprocmask(SIG_SETMASK, [],  <unfinished ...>
[pid  3727] <... rt_sigprocmask resumed> [], 8) = 0
[pid  3726] <... rt_sigprocmask resumed> NULL, 8) = 0
[pid  3727] rt_sigaction(SIGCHLD, NULL,  <unfinished ...>
[pid  3726] nanosleep({2, 0},  <unfinished ...>
[pid  3727] <... rt_sigaction resumed> {SIG_DFL}, 8) = 0
[pid  3727] rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
[pid  3727] nanosleep({2, 0},  <unfinished ...>
[pid  3726] <... nanosleep resumed> {2, 0}) = 0
[pid  3727] <... nanosleep resumed> {2, 0}) = 0
[pid  3726] write(1, "thread 1, thread id : 3084430224"..., 51 <unfinished ...>
[pid  3727] futex(0xb7ed10d0, FUTEX_WAIT, 2, NULL <unfinished ...>
[pid  3726] <... write resumed> )       = 51
[pid  3726] futex(0xb7ed10d0, FUTEX_WAKE, 1 <unfinished ...>
[pid  3727] <... futex resumed> )       = 0
[pid  3726] <... futex resumed> )       = 1
[pid  3727] write(1, "thread 2, thread id : 3076041616"..., 51 <unfinished ...>
[pid  3726] rt_sigprocmask(SIG_BLOCK, [CHLD],  <unfinished ...>
[pid  3727] <... write resumed> )       = 51
[pid  3726] <... rt_sigprocmask resumed> [], 8) = 0
[pid  3727] futex(0xb7ed10d0, FUTEX_WAKE, 1 <unfinished ...>
[pid  3726] rt_sigaction(SIGCHLD, NULL,  <unfinished ...>
[pid  3727] <... futex resumed> )       = 0
[pid  3726] <... rt_sigaction resumed> {SIG_DFL}, 8) = 0
[pid  3727] rt_sigprocmask(SIG_BLOCK, [CHLD],  <unfinished ...>
[pid  3726] rt_sigprocmask(SIG_SETMASK, [],  <unfinished ...>
[pid  3727] <... rt_sigprocmask resumed> [], 8) = 0
[pid  3726] <... rt_sigprocmask resumed> NULL, 8) = 0
[pid  3727] rt_sigaction(SIGCHLD, NULL,  <unfinished ...>
[pid  3726] nanosleep({2, 0},  <unfinished ...>
[pid  3727] <... rt_sigaction resumed> {SIG_DFL}, 8) = 0
[pid  3727] rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
[pid  3727] nanosleep({2, 0},  <unfinished ...>
[pid  3726] <... nanosleep resumed> {2, 0}) = 0
[pid  3727] <... nanosleep resumed> {2, 0}) = 0
[pid  3726] write(1, "thread 1, thread id : 3084430224"..., 51 <unfinished ...>
[pid  3727] futex(0xb7ed10d0, FUTEX_WAIT, 2, NULL <unfinished ...>
[pid  3726] <... write resumed> )       = 51
[pid  3726] futex(0xb7ed10d0, FUTEX_WAKE, 1) = 0
[pid  3726] rt_sigprocmask(SIG_BLOCK, [CHLD],  <unfinished ...>
[pid  3727] <... futex resumed> )       = -1 EAGAIN (Resource temporarily unavailable)
[pid  3726] <... rt_sigprocmask resumed> [], 8) = 0
[pid  3727] write(1, "thread 2, thread id : 3076041616"..., 51 <unfinished ...>
[pid  3726] rt_sigaction(SIGCHLD, NULL,  <unfinished ...>
[pid  3727] <... write resumed> )       = 51
[pid  3727] futex(0xb7ed10d0, FUTEX_WAKE, 1) = 0
[pid  3727] rt_sigprocmask(SIG_BLOCK, [CHLD],  <unfinished ...>
[pid  3726] <... rt_sigaction resumed> {SIG_DFL}, 8) = 0
[pid  3727] <... rt_sigprocmask resumed> [], 8) = 0
[pid  3726] rt_sigprocmask(SIG_SETMASK, [],  <unfinished ...>
[pid  3727] rt_sigaction(SIGCHLD, NULL,  <unfinished ...>
[pid  3726] <... rt_sigprocmask resumed> NULL, 8) = 0
[pid  3727] <... rt_sigaction resumed> {SIG_DFL}, 8) = 0
[pid  3726] nanosleep({2, 0},  <unfinished ...>
[pid  3727] rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
[pid  3727] nanosleep({2, 0},  <unfinished ...>
[pid  3725] <... nanosleep resumed> {10, 0}) = 0
[pid  3725] exit_group(0)               = ?
[pid  3726] <... nanosleep resumed> 0xb7d8a3a4) = ? ERESTART_RESTARTBLOCK (To be restarted)
[pid  3727] <... nanosleep resumed> 0xb758a3a4) = ? ERESTART_RESTARTBLOCK (To be restarted)

Process 3726 detached
Process 3727 detached
Process 3725 detached

---------------------
strace -f ./pthread 2>pthread-2.6.23-rc8-mm2.txt

execve("./pthread", ["./pthread"], [/* 28 vars */]) = 0
brk(0) = 0x96a8000
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory)
mmap2(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7f83000
access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory)
open("/etc/ld.so.cache", O_RDONLY) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=137930, ...}) = 0
mmap2(NULL, 137930, PROT_READ, MAP_PRIVATE, 3, 0) = 0xb7f61000

close(3)                                = 0
access("/etc/ld.so.nohwcap", F_OK)      = -1 ENOENT (No such file or directory)
open("/lib/libpthread.so.0", O_RDONLY)  = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0pG\0\000"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0755, st_size=108045, ...}) = 0
mmap2(NULL, 90592, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7f4a000
mmap2(0xb7f5d000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x12) = 0xb7f5d000
mmap2(0xb7f5f000, 4576, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0xb7f5f000
close(3)                                = 0
access("/etc/ld.so.nohwcap", F_OK)      = -1 ENOENT (No such file or directory)
open("/lib/libc.so.6", O_RDONLY)        = 3

read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\260a\1"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0755, st_size=1335912, ...}) = 0
mmap2(NULL, 1340944, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7e02000
mmap2(0xb7f44000, 12288, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x142) = 0xb7f44000
mmap2(0xb7f47000, 9744, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0xb7f47000
close(3) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7e01000
set_thread_area({entry_number:-1 -> 6, base_addr:0xb7e01ac0, limit:1048575, seg_32bit:1, contents:0, read_exec_only:0, limit_in_pages:1, seg_not_present:0, useable:1}) = 0

mprotect(0xb7f44000, 4096, PROT_READ)   = 0
munmap(0xb7f61000, 137930)              = 0
set_tid_address(0xb7e01b08)             = 3815

sendto(-1210049776, umovestr: Input/output error
0xc, 3086344180, MSG_EOR|MSG_DONTWAIT|MSG_CONFIRM|MSG_FIN|MSG_RST|0xb7e00000, NULL, 3215103232) = 0 rt_sigaction(SIGRTMIN, {0xb7f4e2a0, [], SA_SIGINFO}, NULL, 8) = 0 rt_sigaction(SIGRT_1, {0xb7f4e320, [], SA_RESTART|SA_SIGINFO}, NULL, 8) = 0 rt_sigprocmask(SIG_UNBLOCK, [RTMIN RT_1], NULL, 8) = 0
getrlimit(RLIMIT_STACK, {rlim_cur=8192*1024, rlim_max=RLIM_INFINITY}) = 0 uname({sys="Linux", node="dijkstra", ...}) = 0
rt_sigaction(SIGUSR1, {0x8048604, [USR1], 0}, NULL, 8) = 0
mmap2(NULL, 8388608, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7601000

brk(0)                                  = 0x96a8000
brk(0x96c9000)                          = 0x96c9000
mprotect(0xb7601000, 4096, PROT_NONE)   = 0

clone(Process 3816 attached (waiting for parent)
Process 3816 resumed (parent 3815 ready)
child_stack=0xb7e004c4, flags=CLONE_VM|CLONE_FS|CLONE_FILES|CLONE_SIGHAND|CLONE_THREAD|CLONE_SYSVSEM|CLONE_SETTLS|CLONE_PARENT_SETTID|CLONE_CHILD_CLEARTID, parent_tidptr=0xb7e00bd8, {entry_number:6, base_addr:0xb7e00b90, limit:1048575, seg_32bit:1, contents:0, read_exec_only:0, limit_in_pages:1, seg_not_present:0, useable:1}, child_tidptr=0xb7e00bd8) = 3816 [pid 3816] sendto(-1210053664, umovestr: Input/output error
0xc, 3086344180, 0, ptrace: umoven: Input/output error
{...}, 3084911816 <unfinished ...>

[pid  3815] mmap2(NULL, 8388608, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0 <unfinished ...>
[pid  3816] <... sendto resumed> )      = 0
[pid  3815] <... mmap2 resumed> )       = 0xb6e01000
[pid  3816] fstat64(1,  <unfinished ...>
[pid  3815] mprotect(0xb6e01000, 4096, PROT_NONE <unfinished ...>
[pid  3816] <... fstat64 resumed> {st_mode=S_IFCHR|0620, st_rdev=makedev(136, 0), ...}) = 0
[pid  3815] <... mprotect resumed> )    = 0
[pid  3816] mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0 <unfinished ...>
[pid  3815] clone( <unfinished ...>
[pid  3816] <... mmap2 resumed> )       = 0xb7f82000
Process 3817 attached
[pid  3815] <... clone resumed> child_stack=0xb76004c4, flags=CLONE_VM|CLONE_FS|CLONE_FILES|CLONE_SIGHAND|CLONE_THREAD|CLONE_SYSVSEM|CLONE_SETTLS|CLONE_PARENT_SETTID|CLONE_CHILD_CLEARTID, parent_tidptr=0xb7600bd8, {entry_number:6, base_addr:0xb7600b90, limit:1048575, seg_32bit:1, contents:0, read_exec_only:0, limit_in_pages:1, seg_not_present:0, useable:1}, child_tidptr=0xb7600bd8) = 3817
[pid  3816] write(1, "thread 1, thread id : 3084913552"..., 51 <unfinished ...>
[pid  3815] rt_sigprocmask(SIG_BLOCK, [CHLD],  <unfinished ...>
[pid  3816] <... write resumed> )       = 51
[pid  3817] sendto(-1218442272, umovestr: Input/output error
0xc, 3086344180, 0, ptrace: umoven: Input/output error
{...}, 3076523208 <unfinished ...>
[pid  3815] <... rt_sigprocmask resumed> [], 8) = 0
[pid  3816] rt_sigprocmask(SIG_BLOCK, [CHLD],  <unfinished ...>
[pid  3817] <... sendto resumed> )      = 0
[pid  3815] rt_sigaction(SIGCHLD, NULL,  <unfinished ...>
[pid  3816] <... rt_sigprocmask resumed> [], 8) = 0
[pid  3817] write(1, "thread 2, thread id : 3076524944"..., 51 <unfinished ...>
[pid  3815] <... rt_sigaction resumed> {SIG_DFL}, 8) = 0
[pid  3816] rt_sigaction(SIGCHLD, NULL,  <unfinished ...>
[pid  3817] <... write resumed> )       = 51
[pid  3815] rt_sigprocmask(SIG_SETMASK, [],  <unfinished ...>
[pid  3816] <... rt_sigaction resumed> {SIG_DFL}, 8) = 0
[pid  3817] rt_sigprocmask(SIG_BLOCK, [CHLD],  <unfinished ...>
[pid  3815] <... rt_sigprocmask resumed> NULL, 8) = 0
[pid  3816] rt_sigprocmask(SIG_SETMASK, [],  <unfinished ...>
[pid  3817] <... rt_sigprocmask resumed> [], 8) = 0
[pid  3815] nanosleep({10, 0},  <unfinished ...>
[pid  3816] <... rt_sigprocmask resumed> NULL, 8) = 0
[pid  3817] rt_sigaction(SIGCHLD, NULL,  <unfinished ...>
[pid  3816] nanosleep({2, 0},  <unfinished ...>
[pid  3817] <... rt_sigaction resumed> {SIG_DFL}, 8) = 0
[pid  3817] rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
[pid  3817] nanosleep({2, 0},  <unfinished ...>
[pid  3816] <... nanosleep resumed> {2, 0}) = 0
[pid  3817] <... nanosleep resumed> {2, 0}) = 0
[pid  3816] write(1, "thread 1, thread id : 3084913552"..., 51 <unfinished ...>
[pid  3817] futex(0xb7f470d0, FUTEX_WAIT, 2, NULL <unfinished ...>
[pid  3816] <... write resumed> )       = 51
[pid  3816] futex(0xb7f470d0, FUTEX_WAKE, 1) = 1
[pid  3816] rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0
[pid  3816] rt_sigaction(SIGCHLD, NULL, {SIG_DFL}, 8) = 0
[pid  3816] rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
[pid  3816] nanosleep({2, 0},  <unfinished ...>
[pid  3817] <... futex resumed> )       = 0
[pid  3817] write(1, "thread 2, thread id : 3076524944"..., 51) = 51
[pid  3817] futex(0xb7f470d0, FUTEX_WAKE, 1) = 0
[pid  3817] rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0
[pid  3817] rt_sigaction(SIGCHLD, NULL, {SIG_DFL}, 8) = 0
[pid  3817] rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
[pid  3817] nanosleep({2, 0},  <unfinished ...>
[pid  3816] <... nanosleep resumed> {2, 0}) = 0
[pid  3816] write(1, "thread 1, thread id : 3084913552"..., 51) = 51
[pid  3816] rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0
[pid  3816] rt_sigaction(SIGCHLD, NULL, {SIG_DFL}, 8) = 0
[pid  3816] rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
[pid  3816] nanosleep({2, 0},  <unfinished ...>
[pid  3817] <... nanosleep resumed> {2, 0}) = 0
[pid  3817] write(1, "thread 2, thread id : 3076524944"..., 51) = 51
[pid  3817] rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0
[pid  3817] rt_sigaction(SIGCHLD, NULL, {SIG_DFL}, 8) = 0
[pid  3817] rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
[pid  3817] nanosleep({2, 0},  <unfinished ...>
[pid  3816] <... nanosleep resumed> {2, 0}) = 0
[pid  3817] <... nanosleep resumed> {2, 0}) = 0
[pid  3816] write(1, "thread 1, thread id : 3084913552"..., 51 <unfinished ...>
[pid  3817] futex(0xb7f470d0, FUTEX_WAIT, 2, NULL <unfinished ...>
[pid  3816] <... write resumed> )       = 51
[pid  3816] futex(0xb7f470d0, FUTEX_WAKE, 1) = 0
[pid  3816] rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0
[pid  3816] rt_sigaction(SIGCHLD, NULL, {SIG_DFL}, 8) = 0
[pid  3816] rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
[pid  3816] nanosleep({2, 0},  <unfinished ...>
[pid  3817] <... futex resumed> )       = -1 EAGAIN (Resource temporarily unavailable)
[pid  3817] write(1, "thread 2, thread id : 3076524944"..., 51) = 51
[pid  3817] futex(0xb7f470d0, FUTEX_WAKE, 1) = 0
[pid  3817] rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0
[pid  3817] rt_sigaction(SIGCHLD, NULL, {SIG_DFL}, 8) = 0
[pid  3817] rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
[pid  3817] nanosleep({2, 0},  <unfinished ...>
[pid  3816] <... nanosleep resumed> {2, 0}) = 0
[pid  3817] <... nanosleep resumed> {2, 0}) = 0
[pid  3816] write(1, "thread 1, thread id : 3084913552"..., 51 <unfinished ...>
[pid  3817] futex(0xb7f470d0, FUTEX_WAIT, 2, NULL <unfinished ...>
[pid  3816] <... write resumed> )       = 51
[pid  3816] futex(0xb7f470d0, FUTEX_WAKE, 1) = 0
[pid  3816] rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0
[pid  3816] rt_sigaction(SIGCHLD, NULL, {SIG_DFL}, 8) = 0
[pid  3816] rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
[pid  3816] nanosleep({2, 0},  <unfinished ...>
[pid  3817] <... futex resumed> )       = -1 EAGAIN (Resource temporarily unavailable)
[pid  3817] write(1, "thread 2, thread id : 3076524944"..., 51) = 51
[pid  3817] futex(0xb7f470d0, FUTEX_WAKE, 1) = 0
[pid  3817] rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0
[pid  3817] rt_sigaction(SIGCHLD, NULL, {SIG_DFL}, 8) = 0
[pid  3817] rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
[pid  3817] nanosleep({2, 0},  <unfinished ...>
[pid  3815] <... nanosleep resumed> {10, 0}) = 0
[pid  3815] futex(0xb7e00bd8, FUTEX_WAIT, 3816, NULL <unfinished ...>
[pid  3816] <... nanosleep resumed> {2, 0}) = 0
[pid  3817] <... nanosleep resumed> {2, 0}) = 0
[pid  3816] write(1, "thread 1, thread id : 3084913552"..., 51 <unfinished ...>
[pid  3817] futex(0xb7f470d0, FUTEX_WAIT, 2, NULL <unfinished ...>
[pid  3816] <... write resumed> )       = 51
[pid  3816] futex(0xb7f470d0, FUTEX_WAKE, 1 <unfinished ...>
[pid  3817] <... futex resumed> )       = 0
[pid  3816] <... futex resumed> )       = 1
[pid  3817] write(1, "thread 2, thread id : 3076524944"..., 51 <unfinished ...>
[pid  3816] rt_sigprocmask(SIG_BLOCK, [CHLD],  <unfinished ...>
[pid  3817] <... write resumed> )       = 51
[pid  3816] <... rt_sigprocmask resumed> [], 8) = 0
[pid  3817] futex(0xb7f470d0, FUTEX_WAKE, 1 <unfinished ...>
[pid  3816] rt_sigaction(SIGCHLD, NULL,  <unfinished ...>
[pid  3817] <... futex resumed> )       = 0
[pid  3816] <... rt_sigaction resumed> {SIG_DFL}, 8) = 0
[pid  3817] rt_sigprocmask(SIG_BLOCK, [CHLD],  <unfinished ...>
[pid  3816] rt_sigprocmask(SIG_SETMASK, [],  <unfinished ...>
[pid  3817] <... rt_sigprocmask resumed> [], 8) = 0
[pid  3816] <... rt_sigprocmask resumed> NULL, 8) = 0
[pid  3817] rt_sigaction(SIGCHLD, NULL,  <unfinished ...>
[pid  3816] nanosleep({2, 0},  <unfinished ...>
[pid  3817] <... rt_sigaction resumed> {SIG_DFL}, 8) = 0
[pid  3817] rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
[pid  3817] nanosleep({2, 0},  <unfinished ...>
[pid  3816] <... nanosleep resumed> {2, 0}) = 0
[pid  3817] <... nanosleep resumed> {2, 0}) = 0
[pid  3816] write(1, "thread 1, thread id : 3084913552"..., 51 <unfinished ...>
[pid  3817] futex(0xb7f470d0, FUTEX_WAIT, 2, NULL <unfinished ...>
[pid  3816] <... write resumed> )       = 51
[pid  3816] futex(0xb7f470d0, FUTEX_WAKE, 1) = 1
[pid  3816] rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0
[pid  3816] rt_sigaction(SIGCHLD, NULL, {SIG_DFL}, 8) = 0
[pid  3816] rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
[pid  3816] nanosleep({2, 0},  <unfinished ...>
[pid  3817] <... futex resumed> )       = 0
[pid  3817] write(1, "thread 2, thread id : 3076524944"..., 51) = 51
[pid  3817] futex(0xb7f470d0, FUTEX_WAKE, 1) = 0
[pid  3817] rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0
[pid  3817] rt_sigaction(SIGCHLD, NULL, {SIG_DFL}, 8) = 0
[pid  3817] rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
[pid  3817] nanosleep({2, 0},  <unfinished ...>
[pid  3816] <... nanosleep resumed> {2, 0}) = 0
[pid  3817] <... nanosleep resumed> {2, 0}) = 0
[pid  3816] futex(0xb7f470d0, FUTEX_WAIT, 2, NULL <unfinished ...>
[pid  3817] write(1, "thread 2, thread id : 3076524944"..., 51) = 51
[pid  3817] futex(0xb7f470d0, FUTEX_WAKE, 1 <unfinished ...>
[pid  3816] <... futex resumed> )       = 0
[pid  3817] <... futex resumed> )       = 1
[pid  3816] write(1, "thread 1, thread id : 3084913552"..., 51 <unfinished ...>
[pid  3817] rt_sigprocmask(SIG_BLOCK, [CHLD],  <unfinished ...>
[pid  3816] <... write resumed> )       = 51
[pid  3817] <... rt_sigprocmask resumed> [], 8) = 0
[pid  3816] futex(0xb7f470d0, FUTEX_WAKE, 1 <unfinished ...>
[pid  3817] rt_sigaction(SIGCHLD, NULL,  <unfinished ...>
[pid  3816] <... futex resumed> )       = 0
[pid  3817] <... rt_sigaction resumed> {SIG_DFL}, 8) = 0
[pid  3816] rt_sigprocmask(SIG_BLOCK, [CHLD],  <unfinished ...>
[pid  3817] rt_sigprocmask(SIG_SETMASK, [],  <unfinished ...>
[pid  3816] <... rt_sigprocmask resumed> [], 8) = 0
[pid  3817] <... rt_sigprocmask resumed> NULL, 8) = 0
[pid  3816] rt_sigaction(SIGCHLD, NULL,  <unfinished ...>
[pid  3817] nanosleep({2, 0},  <unfinished ...>
[pid  3816] <... rt_sigaction resumed> {SIG_DFL}, 8) = 0
[pid  3816] rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
[pid  3816] nanosleep({2, 0},  <unfinished ...>
[pid  3817] <... nanosleep resumed> {2, 0}) = 0
[pid  3816] <... nanosleep resumed> {2, 0}) = 0
[pid  3817] write(1, "thread 2, thread id : 3076524944"..., 51 <unfinished ...>
[pid  3816] futex(0xb7f470d0, FUTEX_WAIT, 2, NULL <unfinished ...>
[pid  3817] <... write resumed> )       = 51
[pid  3817] futex(0xb7f470d0, FUTEX_WAKE, 1) = 1
[pid  3817] rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0
[pid  3817] rt_sigaction(SIGCHLD, NULL, {SIG_DFL}, 8) = 0
[pid  3817] rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
[pid  3817] nanosleep({2, 0},  <unfinished ...>
[pid  3816] <... futex resumed> )       = 0
[pid  3816] write(1, "thread 1, thread id : 3084913552"..., 51) = 51
[pid  3816] futex(0xb7f470d0, FUTEX_WAKE, 1) = 0
[pid  3816] rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0
[pid  3816] rt_sigaction(SIGCHLD, NULL, {SIG_DFL}, 8) = 0
[pid  3816] rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
[pid  3816] nanosleep({2, 0},  <unfinished ...>
[pid  3817] <... nanosleep resumed> {2, 0}) = 0
[pid  3816] <... nanosleep resumed> {2, 0}) = 0
[pid  3817] write(1, "thread 2, thread id : 3076524944"..., 51 <unfinished ...>
[pid  3816] futex(0xb7f470d0, FUTEX_WAIT, 2, NULL <unfinished ...>
[pid  3817] <... write resumed> )       = 51
[pid  3817] futex(0xb7f470d0, FUTEX_WAKE, 1) = 0
[pid  3817] rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0
[pid  3817] rt_sigaction(SIGCHLD, NULL, {SIG_DFL}, 8) = 0
[pid  3817] rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
[pid  3817] nanosleep({2, 0},  <unfinished ...>
[pid  3816] <... futex resumed> )       = -1 EAGAIN (Resource temporarily unavailable)
[pid  3816] write(1, "thread 1, thread id : 3084913552"..., 51) = 51
[pid  3816] futex(0xb7f470d0, FUTEX_WAKE, 1) = 0
[pid  3816] rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0
[pid  3816] rt_sigaction(SIGCHLD, NULL, {SIG_DFL}, 8) = 0
[pid  3816] rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
[pid  3816] nanosleep({2, 0},  <unfinished ...>

Process 3816 detached
Process 3817 detached

--------------
.config

#
# Automatically generated make config: don't edit # Linux kernel version: 2.6.23-mm1
# Fri Oct 12 15:10:53 2007
#
CONFIG_X86_32=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_QUICKLIST=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION="-testssmp"
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_USER_NS is not set
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_TREE=y
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
# CONFIG_CGROUPS is not set
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_FAIR_USER_SCHED=y
# CONFIG_FAIR_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_RELAY=y
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_PROC_KPAGEMAP=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_LBD=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_LSF=y
# CONFIG_BLK_DEV_BSG is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"

#
# Processor type and features
#
# CONFIG_TICK_ONESHOT is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_PARAVIRT=y
CONFIG_XEN=y
CONFIG_VMI=y
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
CONFIG_MPENTIUMIII=y
# CONFIG_MPENTIUMM is not set
# CONFIG_MCORE2 is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=5
CONFIG_X86_XADD=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=4
# CONFIG_HPET_TIMER is not set
CONFIG_NR_CPUS=8
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=y
# CONFIG_X86_MCE_P4THERMAL is not set
CONFIG_VM86=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_X86_REBOOTFIXUPS is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set

#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_DELL_RBU is not set
CONFIG_DCDBAS=m
CONFIG_DMIID=y
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_3G_OPT is not set
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_2G_OPT is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4096
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_NR_QUICK=1
CONFIG_VIRT_TO_BUS=y
# CONFIG_HIGHPTE is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_EFI is not set
CONFIG_IRQBALANCE=y
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x100000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x100000
CONFIG_HOTPLUG_CPU=y
CONFIG_COMPAT_VDSO=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y

#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND_SMP_POSSIBLE=y
CONFIG_SUSPEND=y
CONFIG_HIBERNATION_SMP_POSSIBLE=y
# CONFIG_HIBERNATION is not set
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
# CONFIG_APM is not set

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
# CONFIG_CPU_IDLE is not set

#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_DEBUG is not set
CONFIG_HT_IRQ=y
CONFIG_ISA_DMA_API=y
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_MISC=y

#
# Networking
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=y
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
# CONFIG_NF_CONNTRACK_ENABLED is not set
# CONFIG_NF_CONNTRACK is not set
# CONFIG_NETFILTER_XTABLES is not set

#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_QUEUE=y
# CONFIG_IP_NF_IPTABLES is not set
# CONFIG_IP_NF_ARPTABLES is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set

#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set

#
# Wireless
#
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_MAC80211 is not set
CONFIG_IEEE80211=m
CONFIG_IEEE80211_DEBUG=y
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
# CONFIG_IEEE80211_CRYPT_TKIP is not set
# CONFIG_IEEE80211_SOFTMAC is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
# CONFIG_MTD is not set
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
# CONFIG_PARPORT_1284 is not set
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set

#
# Protocols
#
# CONFIG_ISAPNP is not set
# CONFIG_PNPBIOS is not set
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_XEN_BLKDEV_FRONTEND is not set
CONFIG_MISC_DEVICES=y
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_SONY_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
CONFIG_IDE=y
CONFIG_IDE_MAX_HWIFS=4
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives #
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_BLK_DEV_IDEACPI is not set
# CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_PLATFORM is not set
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set

#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_RZ1000=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_CS5535 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
# CONFIG_IDE_ARM is not set

#
# Other IDE chipsets support
#

#
# Note: most of these also require special kernel boot parameters #
# CONFIG_BLK_DEV_4DRIVES is not set
# CONFIG_BLK_DEV_ALI14XX is not set
# CONFIG_BLK_DEV_DTC2278 is not set
# CONFIG_BLK_DEV_HT6560B is not set
# CONFIG_BLK_DEV_QD65XX is not set
# CONFIG_BLK_DEV_UMC8672 is not set CONFIG_BLK_DEV_IDEDMA=y
CONFIG_IDE_ARCH_OBSOLETE_INIT=y
# CONFIG_BLK_DEV_HD is not set

#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs #
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set CONFIG_SCSI_WAIT_SCAN=m

#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
CONFIG_SCSI_ISCSI_ATTRS=m
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_BROADSAS is not set
CONFIG_SCSI_DPT_I2O=m
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
CONFIG_SCSI_QLA_ISCSI=m
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_SEAGATE is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SVW is not set
CONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ACPI is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CS5535 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_LEGACY is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_QDI is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_WINBOND_VLB is not set
# CONFIG_PATA_PLATFORM is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
CONFIG_IEEE1394=y

#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set

#
# Controllers
#

#
# Texas Instruments PCILynx requires I2C
#
CONFIG_IEEE1394_OHCI1394=y

#
# Protocols
#
# CONFIG_IEEE1394_VIDEO1394 is not set
# CONFIG_IEEE1394_SBP2 is not set
# CONFIG_IEEE1394_ETH1394_ROM_ENTRY is not set
# CONFIG_IEEE1394_ETH1394 is not set
# CONFIG_IEEE1394_DV1394 is not set
CONFIG_IEEE1394_RAWIO=y
# CONFIG_I2O is not set
CONFIG_MACINTOSH_DRIVERS=y
# CONFIG_MAC_EMUMOUSEBTN is not set
CONFIG_NETDEVICES=y
# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
# CONFIG_VETH is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_NET_TULIP is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_CS89x0 is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
CONFIG_8139TOO=y
CONFIG_8139TOO_PIO=y
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_NET_POCKET is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
CONFIG_SKGE=m
CONFIG_SKY2=m
# CONFIG_SKY2_DEBUG is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
CONFIG_S2IO=m
# CONFIG_S2IO_NAPI is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_TR is not set

#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
CONFIG_XEN_NETDEV_FRONTEND=y
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
CONFIG_INPUT_POLLDEV=m

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set

#
# Character devices
#
CONFIG_VT=y
# CONFIG_VT_UNICODE is not set
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=y
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set
CONFIG_HVC_DRIVER=y
CONFIG_HVC_XEN=y
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
CONFIG_RTC=m
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_NSC_GPIO is not set
# CONFIG_CS5535_GPIO is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set

#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
# CONFIG_WATCHDOG is not set

#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set

#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
CONFIG_DAB=y
# CONFIG_USB_DABUSB is not set

#
# Graphics support
#
CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
CONFIG_AGP_INTEL=y
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_I830 is not set
# CONFIG_DRM_I915 is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set

#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
# CONFIG_VIDEO_SELECT is not set
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y

#
# Sound
#
CONFIG_SOUND=y

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_SEQUENCER=y
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_RTCTIMER is not set
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set

#
# Generic devices
#
CONFIG_SND_AC97_CODEC=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_MTS64 is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
# CONFIG_SND_PORTMAN2X4 is not set

#
# ISA devices
#
# CONFIG_SND_ADLIB is not set
# CONFIG_SND_AD1816A is not set
# CONFIG_SND_AD1848 is not set
# CONFIG_SND_ALS100 is not set
# CONFIG_SND_AZT2320 is not set
# CONFIG_SND_CMI8330 is not set
# CONFIG_SND_CS4231 is not set
# CONFIG_SND_CS4232 is not set
# CONFIG_SND_CS4236 is not set
# CONFIG_SND_DT019X is not set
# CONFIG_SND_ES968 is not set
# CONFIG_SND_ES1688 is not set
# CONFIG_SND_ES18XX is not set
# CONFIG_SND_SC6000 is not set
# CONFIG_SND_GUSCLASSIC is not set
# CONFIG_SND_GUSEXTREME is not set
# CONFIG_SND_GUSMAX is not set
# CONFIG_SND_INTERWAVE is not set
# CONFIG_SND_INTERWAVE_STB is not set
# CONFIG_SND_OPL3SA2 is not set
# CONFIG_SND_OPTI92X_AD1848 is not set
# CONFIG_SND_OPTI92X_CS4231 is not set
# CONFIG_SND_OPTI93X is not set
# CONFIG_SND_MIRO is not set
# CONFIG_SND_SB8 is not set
# CONFIG_SND_SB16 is not set
# CONFIG_SND_SBAWE is not set
# CONFIG_SND_SGALAXY is not set
# CONFIG_SND_SSCAPE is not set
# CONFIG_SND_WAVEFRONT is not set

#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDA_INTEL=m
# CONFIG_SND_HDA_HWDEP is not set
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_VIA=y
CONFIG_SND_HDA_CODEC_ATIHDMI=y
CONFIG_SND_HDA_CODEC_CONEXANT=y
CONFIG_SND_HDA_CODEC_CMEDIA=y
CONFIG_SND_HDA_CODEC_SI3054=y
CONFIG_SND_HDA_GENERIC=y
# CONFIG_SND_HDA_POWER_SAVE is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=y
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_AC97_POWER_SAVE is not set

#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set

#
# System on Chip audio support
#
# CONFIG_SND_SOC is not set

#
# SoC Audio support for SuperH
#

#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=y
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set

#
# USB Input Devices
#
CONFIG_USB_HID=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_PERSIST is not set
# CONFIG_USB_OTG is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set

#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=y

#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' #

# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_LIBUSUAL is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
CONFIG_USB_MON=y

#
# USB port drivers
#
# CONFIG_USB_USS720 is not set

#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
# CONFIG_USB_SERIAL_GENERIC is not set
# CONFIG_USB_SERIAL_AIRCABLE is not set
# CONFIG_USB_SERIAL_AIRPRIME is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP2101 is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
# CONFIG_USB_SERIAL_FUNSOFT is not set
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
CONFIG_USB_SERIAL_PL2303=m
# CONFIG_USB_SERIAL_OTI6858 is not set
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_DEBUG is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
CONFIG_USB_CYTHERM=m
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_GOTEMP is not set

#
# USB DSL modem support
#

#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set

#
# SPI RTC drivers
#

#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set

#
# on-CPU RTC drivers
#
# CONFIG_DMADEVICES is not set
CONFIG_AUXDISPLAY=y
# CONFIG_KS0108 is not set
CONFIG_VIRTUALIZATION=y
# CONFIG_KVM is not set

#
# Userspace I/O
#
# CONFIG_UIO is not set
# CONFIG_LGUEST is not set

#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISER4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=y

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set

#
# Layered filesystems
#
# CONFIG_UNION_FS is not set

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
# CONFIG_NFSD_V3 is not set
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=y
CONFIG_EXPORTFS=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_SUNRPC_BIND34 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
CONFIG_INSTRUMENTATION=y
CONFIG_PROFILING=y
CONFIG_OPROFILE=m
CONFIG_KPROBES=y
CONFIG_MARKERS=y

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_UNUSED_SYMBOLS=y
# CONFIG_PAGE_OWNER is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_SLAB is not set
CONFIG_DEBUG_PREEMPT=y
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_PI_LIST=y
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
CONFIG_LOCKDEP=y
# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_LOCKDEP=y
CONFIG_TRACE_IRQFLAGS=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_HIGHMEM=y
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_VM=y
CONFIG_DEBUG_LIST=y
CONFIG_FRAME_POINTER=y
# CONFIG_PROFILE_LIKELY is not set
CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_DEBUG_SYNCHRO_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_WANT_EXTRA_DEBUG_INFORMATION is not set
# CONFIG_UNWIND_INFO is not set
# CONFIG_KGDB is not set
# CONFIG_KGDB_ATTACH_WAIT is not set
CONFIG_SAMPLES=y
CONFIG_SAMPLE_MARKERS=m
CONFIG_EARLY_PRINTK=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_DEBUG_RODATA=y
# CONFIG_4KSTACKS is not set
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
CONFIG_DOUBLEFAULT=y

#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=y
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_586 is not set
# CONFIG_CRYPTO_SERPENT is not set
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_586 is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_DEFLATE is not set
CONFIG_CRYPTO_MICHAEL_MIC=y
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
# CONFIG_CRYPTO_AUTHENC is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_PADLOCK is not set
CONFIG_CRYPTO_DEV_GEODE=y

#
# Library routines
#
CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_AUDIT_GENERIC=y
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_X86_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_KTIME_SCALAR=y

Signature · 3 lines

Mathieu Desnoyers
Computer Engineering Ph.D. Student, Ecole Polytechnique de Montreal
OpenPGP key fingerprint: 8CD5 52C3 8E3C 4140 715F  BA06 3F25 A8FE 3BAE 9A68

Andrew Morton

author maintainer

2007-10-12 20:01 UTC #8 lore raw

Re: 2.6.23-mm1 thread exit_group issue

Quoted 5 lines · On Fri, 12 Oct 2007 15:47:59 -0400 Mathieu Desnoyers…

I noticed a regression between 2.6.23-rc8-mm2 and 2.6.23-mm1 (with your hotfixes). User space threads seems to receive a ERESTART_RESTARTBLOCK as soon as a thread does a pthread_join on them. The previous behavior was to wait for them to exit by taking a futex.

Quoted 7 lines

I provide a toy program that shows the problem. On 2.6.23-rc8-mm2, it loops forever (as it should). On 2.6.23-mm1, it exits after 10 seconds.
Any idea on what may cause this problem ?
(I also provide complete ptrace -f of a correct and buggy run and my kernel config. Tests were done on i386.)

No idea. But I can reproduce it here so I'll bisect it now. Thanks for the test case!

Andrew Morton

author maintainer

2007-10-13 01:04 UTC #9 lore raw

Re: 2.6.23-mm1 thread exit_group issue

In reply to Mathieu Desnoyers

Quoted 11 lines · On Fri, 12 Oct 2007 15:47:59 -0400 Mathieu Desnoyers…

Hi Andrew,
I noticed a regression between 2.6.23-rc8-mm2 and 2.6.23-mm1 (with your hotfixes). User space threads seems to receive a ERESTART_RESTARTBLOCK as soon as a thread does a pthread_join on them. The previous behavior was to wait for them to exit by taking a futex.
I provide a toy program that shows the problem. On 2.6.23-rc8-mm2, it loops forever (as it should). On 2.6.23-mm1, it exits after 10 seconds.
Any idea on what may cause this problem ?

Bisection shows that this problem is caused by these two patches:

pid-namespaces-allow-cloning-of-new-namespace.patch pid-namespaces-allow-cloning-of-new-namespace-fix-check-for-return-value-of-create_pid_namespace.patch

Quoted 88 lines

(I also provide complete ptrace -f of a correct and buggy run and my kernel config. Tests were done on i386.)
Mathieu
/*
* Thread testing
*
* build with gcc -lpthread -o pthread pthread.c
*
* Mathieu Desnoyers
* License: GPL
*/
#include <stdio.h>
#include <pthread.h>
#include <stdlib.h>
#include <sys/types.h>
#include <sys/wait.h>
#include <unistd.h>
#include <stdio.h>
#include <signal.h>
static int __thread test = 0;
/* signal handler */
void handler(int signo)
{
	printf("Sig handler : TID %lu, pid : %lu\n", pthread_self(), getpid());
}
void *thr1(void *arg)
{
	test = 1;
	
	while(1) {
		printf("thread 1, thread id : %lu, pid %lu, test %d\n",
				pthread_self(), getpid(), test);
		sleep(2);
	}
	return ((void*)1);
}
void *thr2(void *arg)
{
	while(1) { 
		printf("thread 2, thread id : %lu, pid %lu, test %d\n",
				pthread_self(), getpid(), test);
		sleep(2);
	}
	return ((void*)2);
}
int main()
{
	int err;
	pthread_t tid1, tid2;
	void *tret;
	static struct sigaction act;

	act.sa_handler = handler;
	sigemptyset(&(act.sa_mask));
	sigaddset(&(act.sa_mask), SIGUSR1);
	sigaction(SIGUSR1, &act, NULL);

	err = pthread_create(&tid1, NULL, thr1, NULL);
	if (err != 0)
		exit(1);

	err = pthread_create(&tid2, NULL, thr2, NULL);
	if (err != 0)
		exit(1);

	sleep(10);

	err = pthread_join(tid1, &tret);
	if (err != 0)
		exit(1);

	err = pthread_join(tid2, &tret);
	if (err != 0)
		exit(1);

	return 0;
}

Oleg Nesterov

2007-10-13 13:03 UTC #10 lore raw

Re: 2.6.23-mm1 thread exit_group issue

Quoted 10 lines · Andrew Morton

Quoted 6 lines · On Fri, 12 Oct 2007 15:47:59 -0400 Mathieu Desnoyers…
Hi Andrew,
I noticed a regression between 2.6.23-rc8-mm2 and 2.6.23-mm1 (with your hotfixes). User space threads seems to receive a ERESTART_RESTARTBLOCK as soon as a thread does a pthread_join on them. The previous behavior was to wait for them to exit by taking a futex.

No, the reason is that pthread_join() succeeds while it shouldn't. The main thread does exit_group() and kills the sub-thread sleeping in nanosleep. ERESTART_RESTARTBLOCK is not delivered to the user-space (sub-thread is dying), it is just reported by gdb.

Quoted 2 lines

Quoted 2 lines
I provide a toy program that shows the problem. On 2.6.23-rc8-mm2, it loops forever (as it should). On 2.6.23-mm1, it exits after 10 seconds.

I bet something like this

	void *threda(void *arg)
	{
		for (;;)
			pause();
		return NULL;
	}

	int main(void)
	{
		pthread_t tid;

		pthread_create(&tid, NULL, thread, NULL);
		pthread_join(tid, NULL);

		return 0;
	}

won't work as well.

Quoted 1 line

Quoted 1 line
Any idea on what may cause this problem ?

Because do_fork() doesn't use parent_tidptr. At all! So it is very clear why 2.6.23-mm1 is broken.

Quoted 3 lines

Bisection shows that this problem is caused by these two patches:
pid-namespaces-allow-cloning-of-new-namespace.patch

This? http://marc.info/?l=linux-mm-commits&m=118712242002039

Pavel, this patch has a subtle difference compared to what we discussed on containers list. It moves put_user(parent_tidptr) from copy_process() to do_fork(), so we don't report child's pid if copy_process() failed. I do not think this is bad, but Eric seems to disagree with such a change.

But I can't understand why Andrew sees the same problem _after_ this patch!

And which patch removed the "put_user(nr, parent_tidptr)" chunk?

Andrew, could I get the kernel source after bisection somehow? (I am not familiar with guilt, will try to study it later)

Mathieu, could you try the patch below?

Oleg.

fork.c renamed from fork.c~ +3 -0

@@ -1443,6 +1443,9 @@ long do_fork(unsigned long clone_flags,
 			task_pid_nr_ns(p, current->nsproxy->pid_ns) :
 				task_pid_vnr(p);
 
+		if (clone_flags & CLONE_PARENT_SETTID)
+			put_user(nr, parent_tidptr);
+
 		if (clone_flags & CLONE_VFORK) {
 			p->vfork_done = &vfork;
 			init_completion(&vfork);

Oleg Nesterov

2007-10-13 11:58 UTC #11 lore raw

Re: 2.6.23-mm1 thread exit_group issue

Quoted 9 lines · Oleg Nesterov

Quoted 4 lines · Andrew Morton
Bisection shows that this problem is caused by these two patches:
pid-namespaces-allow-cloning-of-new-namespace.patch
This? http://marc.info/?l=linux-mm-commits&m=118712242002039

Quoted 8 lines

Pavel, this patch has a subtle difference compared to what we discussed on containers list. It moves put_user(parent_tidptr) from copy_process() to do_fork(), so we don't report child's pid if copy_process() failed. I do not think this is bad, but Eric seems to disagree with such a change.
But I can't understand why Andrew sees the same problem _after_ this patch!
And which patch removed the "put_user(nr, parent_tidptr)" chunk?

Aha. I am looking at

	ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.23/2.6.23-mm1/broken-out/pid-namespaces-allow-cloning-of-new-namespace.patch

Looks like the original patch was damaged somehow, it doesn't have the "put_user(nr, parent_tidptr)" code.

Oleg.

Andrew Morton

author maintainer

2007-10-13 17:52 UTC #12 lore raw

Re: 2.6.23-mm1 thread exit_group issue

Quoted 17 lines · On Sat, 13 Oct 2007 16:02:30 +0400 Oleg Nesterov <[email protected]> wrote:

Quoted 16 lines · Oleg Nesterov
Quoted 4 lines · Andrew Morton
Bisection shows that this problem is caused by these two patches:
pid-namespaces-allow-cloning-of-new-namespace.patch
This? http://marc.info/?l=linux-mm-commits&m=118712242002039
Pavel, this patch has a subtle difference compared to what we discussed on containers list. It moves put_user(parent_tidptr) from copy_process() to do_fork(), so we don't report child's pid if copy_process() failed. I do not think this is bad, but Eric seems to disagree with such a change.
But I can't understand why Andrew sees the same problem _after_ this patch!

Quoted 8 lines

Quoted 1 line
And which patch removed the "put_user(nr, parent_tidptr)" chunk?
Aha. I am looking at
	ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.23/2.6.23-mm1/broken-out/pid-namespaces-allow-cloning-of-new-namespace.patch
Looks like the original patch was damaged somehow, it doesn't have the "put_user(nr, parent_tidptr)" code.

It does have it, except it moved somewhere else. That would have been me trying to fix yet another reject storm. I thought I had that one right. Could someone fix it please?

Mathieu Desnoyers

2007-10-14 04:04 UTC #13 lore raw

Re: 2.6.23-mm1 thread exit_group issue

In reply to Oleg Nesterov

Quoted 57 lines · * Oleg Nesterov ([email protected]) wrote:

Quoted 10 lines · Andrew Morton
Quoted 6 lines · On Fri, 12 Oct 2007 15:47:59 -0400 Mathieu Desnoyers…
Hi Andrew,
I noticed a regression between 2.6.23-rc8-mm2 and 2.6.23-mm1 (with your hotfixes). User space threads seems to receive a ERESTART_RESTARTBLOCK as soon as a thread does a pthread_join on them. The previous behavior was to wait for them to exit by taking a futex.
No, the reason is that pthread_join() succeeds while it shouldn't. The main thread does exit_group() and kills the sub-thread sleeping in nanosleep. ERESTART_RESTARTBLOCK is not delivered to the user-space (sub-thread is dying), it is just reported by gdb.
Quoted 2 lines
Quoted 2 lines
I provide a toy program that shows the problem. On 2.6.23-rc8-mm2, it loops forever (as it should). On 2.6.23-mm1, it exits after 10 seconds.
I bet something like this
	void *threda(void *arg)
	{
		for (;;)
			pause();
		return NULL;
	}

	int main(void)
	{
		pthread_t tid;

		pthread_create(&tid, NULL, thread, NULL);
		pthread_join(tid, NULL);

		return 0;
	}
won't work as well.
Quoted 1 line
Quoted 1 line
Any idea on what may cause this problem ?
Because do_fork() doesn't use parent_tidptr. At all! So it is very clear why 2.6.23-mm1 is broken.
Quoted 3 lines
Bisection shows that this problem is caused by these two patches:
pid-namespaces-allow-cloning-of-new-namespace.patch
This? http://marc.info/?l=linux-mm-commits&m=118712242002039
Pavel, this patch has a subtle difference compared to what we discussed on containers list. It moves put_user(parent_tidptr) from copy_process() to do_fork(), so we don't report child's pid if copy_process() failed. I do not think this is bad, but Eric seems to disagree with such a change.

Quoted 9 lines

But I can't understand why Andrew sees the same problem _after_ this patch!
And which patch removed the "put_user(nr, parent_tidptr)" chunk?
Andrew, could I get the kernel source after bisection somehow? (I am not familiar with guilt, will try to study it later)
Mathieu, could you try the patch below?

Hi Oleg,

Yes, it runs fine with this patch.

Thanks,

Mathieu

Quoted 15 lines

Oleg.

fork.c renamed from fork.c~ +3 -0

@@ -1443,6 +1443,9 @@ long do_fork(unsigned long clone_flags,
 			task_pid_nr_ns(p, current->nsproxy->pid_ns) :
 				task_pid_vnr(p);
 
+		if (clone_flags & CLONE_PARENT_SETTID)
+			put_user(nr, parent_tidptr);
+
 		if (clone_flags & CLONE_VFORK) {
 			p->vfork_done = &vfork;
 			init_completion(&vfork);

Signature · 3 lines

Mathieu Desnoyers
Computer Engineering Ph.D. Student, Ecole Polytechnique de Montreal
OpenPGP key fingerprint: 8CD5 52C3 8E3C 4140 715F  BA06 3F25 A8FE 3BAE 9A68

KAMEZAWA Hiroyuki

2007-10-12 07:23 UTC #14 lore raw

In reply to Andrew Morton

Quoted 19 lines · On Thu, 11 Oct 2007 23:42:02 -0700 Andrew Morton <[email protected]>…

Quoted 17 lines · On Fri, 12 Oct 2007 14:03:28 +0900 KAMEZAWA Hiroyuki…
Quoted 6 lines · On Thu, 11 Oct 2007 21:31:26 -0700 Andrew Morton <[email protected]>…
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.23/2.6.23-mm1/
- I've been largely avoiding applying anything since rc8-mm2 in an attempt to stabilise things for the 2.6.23 merge.
On RHEL5/x86_64 environment,
==
[kamezawa@hannibal ref-2.6.23-mm1]$ make menuconfig
Makefile:456: /home/kamezawa/ref-2.6.23-mm1/arch//Makefile: No such file or directory
make: *** No rule to make target `/home/kamezawa/ref-2.6.23-mm1/arch//Makefile'. Stop. ==

Quoted 4 lines

Quoted 1 line
$(ARCH) cannot be detected automatically...
So you need to set $ARCH by hand? I always do that so I didn't notice this.

Yes, I need to set it by hand.

This is a quick fix for me......
Maybe $(ARCH) should be undefined until following .kbuild check.

ifneq ($(wildcard .kbuild),)
...
else
ARCH ?= $(SUBARCH)
endif

-Kame

Makefile +0 -1

Index: ref-2.6.23-mm1/Makefile
===================================================================
@@ -191,7 +191,6 @@ SUBARCH := $(shell uname -m | sed -e s/i
 
 # The empty ARCH and CROSS_COMPILE statements exist so it is easy to
 # patch in hardcoded values for ARCH and CROSS_COMPILE
-ARCH		?=
 CROSS_COMPILE	?=
 
 # Kbuild save the ARCH and CROSS_COMPILE setting in .kbuild

Sam Ravnborg

2007-10-12 08:34 UTC #15 lore raw

Quoted 24 lines

Quoted 5 lines
Quoted 2 lines
$(ARCH) cannot be detected automatically...
So you need to set $ARCH by hand? I always do that so I didn't notice this.
Yes, I need to set it by hand.
This is a quick fix for me......
Maybe $(ARCH) should be undefined until following .kbuild check.
ifneq ($(wildcard .kbuild),)
...
else
ARCH ?= $(SUBARCH)
endif
-Kame
--
Index: ref-2.6.23-mm1/Makefile
===================================================================

Makefile SUBARCH := $(shell uname -m | sed -e s/i · line 196

Quoted 7 lines

Makefile +0 -1

@@ -191,7 +191,6 @@ SUBARCH := $(shell uname -m | sed -e s/i
 
 # The empty ARCH and CROSS_COMPILE statements exist so it is easy to
 # patch in hardcoded values for ARCH and CROSS_COMPILE
-ARCH		?=
 CROSS_COMPILE	?=
 
 # Kbuild save the ARCH and CROSS_COMPILE setting in .kbuild

That line came in on request from Andi/Novell.
And I tested it regioursly with several of my cross compile setups. But never with native - silly me.

But that patch has other issues too so I will withdraw it until I have fixed the other annoying issues.
We are simply to gcc happy in the top-lvel makefile and we run it several times for no good reasons when we for example do maouldes_install or headers_isntall.

Sam

Torsten Kaiser

2007-10-12 08:31 UTC #16 lore raw

In reply to Andrew Morton

Quoted 19 lines · Andrew Morton

Quoted 17 lines · On Fri, 12 Oct 2007 14:03:28 +0900 KAMEZAWA Hiroyuki…
Quoted 6 lines · On Thu, 11 Oct 2007 21:31:26 -0700 Andrew Morton <[email protected]>…
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.23/2.6.23-mm1/
- I've been largely avoiding applying anything since rc8-mm2 in an attempt to stabilise things for the 2.6.23 merge.
On RHEL5/x86_64 environment,
==
[kamezawa@hannibal ref-2.6.23-mm1]$ make menuconfig
Makefile:456: /home/kamezawa/ref-2.6.23-mm1/arch//Makefile: No such file or directory
make: *** No rule to make target `/home/kamezawa/ref-2.6.23-mm1/arch//Makefile'. Stop. ==

Quoted 3 lines

Quoted 1 line
$(ARCH) cannot be detected automatically...
So you need to set $ARCH by hand? I always do that so I didn't notice this.

After setting ARCH by hand, it build and booted OK for me. But I did add the patch fromhttp://lkml.org/lkml/2007/10/11/48 as my personal hotfix.

Two things I noted in my logs:

[   16.040000] NET: Registered protocol family 1
[   16.050000] NET: Registered protocol family 17
[   16.060000] NET: Registered protocol family 15
[   16.080000] sysctl table check failed: /sunrpc/transports .7249.14
Missing strategy
[   16.100000] sysctl table check failed: /sunrpc/transports .7249.14
Unknown sysctl binary path
[   16.130000] RPC: Registered udp transport module.
[   16.140000] RPC: Registered tcp transport module.

... but NFSv4 still works.

Oct 12 10:23:03 treogen smartd[6091]: Device: /dev/sdc, not found in
smartd database.
Oct 12 10:23:03 treogen [  105.990000] WARNING: at
drivers/ata/libata-core.c:5752 ata_qc_issue()
Oct 12 10:23:03 treogen [  105.990000]
Oct 12 10:23:03 treogen [  105.990000] Call Trace:
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff804442ef>]
ata_qc_issue+0x47f/0x540
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff80432e60>] scsi_done+0x0/0x20
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff80449c80>]
ata_scsi_flush_xlat+0x0/0x30
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff8044a6ea>]
ata_scsi_translate+0xfa/0x180
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff80432e60>] scsi_done+0x0/0x20
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff8044d84d>]
ata_scsi_queuecmd+0x12d/0x210
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff804333d0>]
scsi_dispatch_cmd+0x150/0x250
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff804391f1>]
scsi_request_fn+0x1f1/0x360
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff8039b827>]
elv_insert+0x167/0x250
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff803a0ac2>]
__make_request+0xe2/0x670
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff8039d560>]
generic_make_request+0x1d0/0x3c0
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff802bc1b9>]
bio_alloc_bioset+0xb9/0x140
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff802bc061>]
__bio_clone+0x91/0xc0
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff8039d7b6>]
submit_bio+0x66/0xf0
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff804cc06e>]
write_page+0x16e/0x2c0
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff80231b01>]
dequeue_task_fair+0x51/0xb0
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff804c482d>]
md_update_sb+0x18d/0x320
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff804caa10>] md_thread+0x0/0x100
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff804c9065>]
md_check_recovery+0x1f5/0x550
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff804caa10>] md_thread+0x0/0x100
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff804bf1d3>] raid5d+0x23/0x490
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff8023eb12>]
try_to_del_timer_sync+0x52/0x60
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff805b0057>]
schedule_timeout+0x67/0xd0
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff8023e740>]
process_timeout+0x0/0x10
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff805b004a>]
schedule_timeout+0x5a/0xd0
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff804caa10>] md_thread+0x0/0x100
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff804caa40>]
md_thread+0x30/0x100
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff8024a710>]
autoremove_wake_function+0x0/0x30
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff804caa10>] md_thread+0x0/0x100
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff8024a32b>] kthread+0x4b/0x80
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff8020c9d8>] child_rip+0xa/0x12
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff8024a2e0>] kthread+0x0/0x80
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff8020c9ce>] child_rip+0x0/0x12
Oct 12 10:23:03 treogen [  105.990000]
Oct 12 10:23:13 treogen [  115.940000] ata3.00: exception Emask 0x0
SAct 0x0 SErr 0x0 action 0x2 frozen
Oct 12 10:23:13 treogen [  115.940000] ata3.00: cmd
b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 0
Oct 12 10:23:13 treogen [  115.940000]          res
40/00:00:01:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
Oct 12 10:23:13 treogen [  115.940000] ata3.00: status: { DRDY }
Oct 12 10:23:14 treogen [  116.270000] ata3: soft resetting link
Oct 12 10:23:14 treogen [  116.430000] ata3: SATA link up 3.0 Gbps
(SStatus 123 SControl 300)
Oct 12 10:23:14 treogen [  116.740000] ata3.00: configured for UDMA/133
Oct 12 10:23:14 treogen [  116.740000] ata3: EH complete
Oct 12 10:23:14 treogen [  116.740000] WARNING: at
drivers/ata/libata-core.c:5752 ata_qc_issue()
Oct 12 10:23:14 treogen [  116.740000]
Oct 12 10:23:14 treogen [  116.740000] Call Trace:
Oct 12 10:23:14 treogen [  116.740000]  [<ffffffff804442ef>]
ata_qc_issue+0x47f/0x540
Oct 12 10:23:14 treogen [  116.740000]  [<ffffffff80432e60>] scsi_done+0x0/0x20
Oct 12 10:23:14 treogen [  116.740000]  [<ffffffff80449c80>]
ata_scsi_flush_xlat+0x0/0x30
Oct 12 10:23:14 treogen [  116.740000]  [<ffffffff8044a6ea>]
ata_scsi_translate+0xfa/0x180
Oct 12 10:23:14 treogen [  116.740000]  [<ffffffff80432e60>] scsi_done+0x0/0x20
Oct 12 10:23:14 treogen [  116.740000]  [<ffffffff8044d84d>]
ata_scsi_queuecmd+0x12d/0x210
Oct 12 10:23:14 treogen [  116.740000]  [<ffffffff804333d0>]
scsi_dispatch_cmd+0x150/0x250
Oct 12 10:23:14 treogen [  116.740000]  [<ffffffff804391f1>]
scsi_request_fn+0x1f1/0x360
Oct 12 10:23:14 treogen [  116.740000]  [<ffffffff80436b80>]
scsi_error_handler+0x0/0x310
Oct 12 10:23:14 treogen [  116.740000]  [<ffffffff8039fe73>]
blk_run_queue+0x43/0x80
Oct 12 10:23:14 treogen [  116.740000]  [<ffffffff80438659>]
scsi_run_host_queues+0x19/0x40
Oct 12 10:23:14 treogen [  116.740000]  [<ffffffff80436d54>]
scsi_error_handler+0x1d4/0x310
Oct 12 10:23:14 treogen [  116.740000]  [<ffffffff80436b80>]
scsi_error_handler+0x0/0x310
Oct 12 10:23:14 treogen [  116.740000]  [<ffffffff8024a32b>] kthread+0x4b/0x80
Oct 12 10:23:14 treogen [  116.740000]  [<ffffffff8020c9d8>] child_rip+0xa/0x12
Oct 12 10:23:14 treogen [  116.740000]  [<ffffffff8024a2e0>] kthread+0x0/0x80
Oct 12 10:23:14 treogen [  116.740000]  [<ffffffff8020c9ce>] child_rip+0x0/0x12
Oct 12 10:23:14 treogen [  116.740000]
Oct 12 10:23:14 treogen [  116.770000] sd 2:0:0:0: [sdc] 625142448
512-byte hardware sectors (320073 MB)
Oct 12 10:23:14 treogen [  116.770000] sd 2:0:0:0: [sdc] Write Protect is off
Oct 12 10:23:14 treogen [  116.770000] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
Oct 12 10:23:14 treogen [  116.770000] sd 2:0:0:0: [sdc] Write cache:
enabled, read cache: enabled, doesn't support DPO or FUA
Oct 12 10:23:24 treogen [  126.740000] ata3.00: exception Emask 0x0
SAct 0x0 SErr 0x0 action 0x2 frozen
Oct 12 10:23:24 treogen [  126.740000] ata3.00: cmd
b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 0
Oct 12 10:23:24 treogen [  126.740000]          res
40/00:00:01:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
Oct 12 10:23:24 treogen [  126.740000] ata3.00: status: { DRDY }
Oct 12 10:23:24 treogen [  127.070000] ata3: soft resetting link
Oct 12 10:23:25 treogen [  127.230000] ata3: SATA link up 3.0 Gbps
(SStatus 123 SControl 300)
Oct 12 10:23:25 treogen [  127.370000] ata3.00: configured for UDMA/133
Oct 12 10:23:25 treogen [  127.370000] ata3: EH complete
Oct 12 10:23:25 treogen [  127.370000] sd 2:0:0:0: [sdc] 625142448
512-byte hardware sectors (320073 MB)
Oct 12 10:23:25 treogen [  127.370000] sd 2:0:0:0: [sdc] Write Protect is off
Oct 12 10:23:25 treogen [  127.370000] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
Oct 12 10:23:25 treogen [  127.370000] sd 2:0:0:0: [sdc] Write cache:
enabled, read cache: enabled, doesn't support DPO or FUA
Oct 12 10:23:25 treogen smartd[6091]: Device: /dev/sdc, is SMART

capable. Adding to "monitor" list.
... but I can still access the filesystem and the RAID device on that drive. (sdc is MAXTOR STM332082 3.AA sata-drive on a MCP55 using sata_nv with swncq activated)

Torsten

Andrew Morton

author maintainer

2007-10-12 08:37 UTC #17 lore raw

Quoted 20 lines · On Fri, 12 Oct 2007 10:31:42 +0200 "Torsten Kaiser"…

Quoted 19 lines · Andrew Morton
Quoted 17 lines · On Fri, 12 Oct 2007 14:03:28 +0900 KAMEZAWA Hiroyuki…
Quoted 6 lines · On Thu, 11 Oct 2007 21:31:26 -0700 Andrew Morton <[email protected]>…
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.23/2.6.23-mm1/
- I've been largely avoiding applying anything since rc8-mm2 in an attempt to stabilise things for the 2.6.23 merge.
On RHEL5/x86_64 environment,
==
[kamezawa@hannibal ref-2.6.23-mm1]$ make menuconfig
Makefile:456: /home/kamezawa/ref-2.6.23-mm1/arch//Makefile: No such file or directory
make: *** No rule to make target `/home/kamezawa/ref-2.6.23-mm1/arch//Makefile'. Stop. ==

Quoted 5 lines

Quoted 3 lines
Quoted 1 line
$(ARCH) cannot be detected automatically...
So you need to set $ARCH by hand? I always do that so I didn't notice this.
After setting ARCH by hand, it build and booted OK for me.

OK.

Quoted 2 lines

But I did add the patch fromhttp://lkml.org/lkml/2007/10/11/48 as my personal hotfix.

I think Jeff has that in hand?

Quoted 11 lines

Two things I noted in my logs:

[   16.040000] NET: Registered protocol family 1
[   16.050000] NET: Registered protocol family 17
[   16.060000] NET: Registered protocol family 15
[   16.080000] sysctl table check failed: /sunrpc/transports .7249.14
Missing strategy
[   16.100000] sysctl table check failed: /sunrpc/transports .7249.14
Unknown sysctl binary path
[   16.130000] RPC: Registered udp transport module.
[   16.140000] RPC: Registered tcp transport module.

... but NFSv4 still works.

Yeah, Bruce will be dropping the relevant patch - when it comes back it should use CTL_UNNUMBERED.

Quoted 2 lines

Oct 12 10:23:03 treogen smartd[6091]: Device: /dev/sdc, not found in

smartd database.

hm.

Quoted 2 lines

Oct 12 10:23:03 treogen [  105.990000] WARNING: at
drivers/ata/libata-core.c:5752 ata_qc_issue()

Let's cc linux-ide.

Quoted 134 lines

Oct 12 10:23:03 treogen [  105.990000]
Oct 12 10:23:03 treogen [  105.990000] Call Trace:
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff804442ef>]
ata_qc_issue+0x47f/0x540
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff80432e60>] scsi_done+0x0/0x20
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff80449c80>]
ata_scsi_flush_xlat+0x0/0x30
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff8044a6ea>]
ata_scsi_translate+0xfa/0x180
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff80432e60>] scsi_done+0x0/0x20
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff8044d84d>]
ata_scsi_queuecmd+0x12d/0x210
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff804333d0>]
scsi_dispatch_cmd+0x150/0x250
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff804391f1>]
scsi_request_fn+0x1f1/0x360
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff8039b827>]
elv_insert+0x167/0x250
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff803a0ac2>]
__make_request+0xe2/0x670
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff8039d560>]
generic_make_request+0x1d0/0x3c0
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff802bc1b9>]
bio_alloc_bioset+0xb9/0x140
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff802bc061>]
__bio_clone+0x91/0xc0
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff8039d7b6>]
submit_bio+0x66/0xf0
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff804cc06e>]
write_page+0x16e/0x2c0
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff80231b01>]
dequeue_task_fair+0x51/0xb0
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff804c482d>]
md_update_sb+0x18d/0x320
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff804caa10>] md_thread+0x0/0x100
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff804c9065>]
md_check_recovery+0x1f5/0x550
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff804caa10>] md_thread+0x0/0x100
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff804bf1d3>] raid5d+0x23/0x490
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff8023eb12>]
try_to_del_timer_sync+0x52/0x60
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff805b0057>]
schedule_timeout+0x67/0xd0
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff8023e740>]
process_timeout+0x0/0x10
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff805b004a>]
schedule_timeout+0x5a/0xd0
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff804caa10>] md_thread+0x0/0x100
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff804caa40>]
md_thread+0x30/0x100
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff8024a710>]
autoremove_wake_function+0x0/0x30
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff804caa10>] md_thread+0x0/0x100
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff8024a32b>] kthread+0x4b/0x80
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff8020c9d8>] child_rip+0xa/0x12
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff8024a2e0>] kthread+0x0/0x80
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff8020c9ce>] child_rip+0x0/0x12
Oct 12 10:23:03 treogen [  105.990000]
Oct 12 10:23:13 treogen [  115.940000] ata3.00: exception Emask 0x0
SAct 0x0 SErr 0x0 action 0x2 frozen
Oct 12 10:23:13 treogen [  115.940000] ata3.00: cmd
b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 0
Oct 12 10:23:13 treogen [  115.940000]          res
40/00:00:01:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
Oct 12 10:23:13 treogen [  115.940000] ata3.00: status: { DRDY }
Oct 12 10:23:14 treogen [  116.270000] ata3: soft resetting link
Oct 12 10:23:14 treogen [  116.430000] ata3: SATA link up 3.0 Gbps
(SStatus 123 SControl 300)
Oct 12 10:23:14 treogen [  116.740000] ata3.00: configured for UDMA/133
Oct 12 10:23:14 treogen [  116.740000] ata3: EH complete
Oct 12 10:23:14 treogen [  116.740000] WARNING: at
drivers/ata/libata-core.c:5752 ata_qc_issue()
Oct 12 10:23:14 treogen [  116.740000]
Oct 12 10:23:14 treogen [  116.740000] Call Trace:
Oct 12 10:23:14 treogen [  116.740000]  [<ffffffff804442ef>]
ata_qc_issue+0x47f/0x540
Oct 12 10:23:14 treogen [  116.740000]  [<ffffffff80432e60>] scsi_done+0x0/0x20
Oct 12 10:23:14 treogen [  116.740000]  [<ffffffff80449c80>]
ata_scsi_flush_xlat+0x0/0x30
Oct 12 10:23:14 treogen [  116.740000]  [<ffffffff8044a6ea>]
ata_scsi_translate+0xfa/0x180
Oct 12 10:23:14 treogen [  116.740000]  [<ffffffff80432e60>] scsi_done+0x0/0x20
Oct 12 10:23:14 treogen [  116.740000]  [<ffffffff8044d84d>]
ata_scsi_queuecmd+0x12d/0x210
Oct 12 10:23:14 treogen [  116.740000]  [<ffffffff804333d0>]
scsi_dispatch_cmd+0x150/0x250
Oct 12 10:23:14 treogen [  116.740000]  [<ffffffff804391f1>]
scsi_request_fn+0x1f1/0x360
Oct 12 10:23:14 treogen [  116.740000]  [<ffffffff80436b80>]
scsi_error_handler+0x0/0x310
Oct 12 10:23:14 treogen [  116.740000]  [<ffffffff8039fe73>]
blk_run_queue+0x43/0x80
Oct 12 10:23:14 treogen [  116.740000]  [<ffffffff80438659>]
scsi_run_host_queues+0x19/0x40
Oct 12 10:23:14 treogen [  116.740000]  [<ffffffff80436d54>]
scsi_error_handler+0x1d4/0x310
Oct 12 10:23:14 treogen [  116.740000]  [<ffffffff80436b80>]
scsi_error_handler+0x0/0x310
Oct 12 10:23:14 treogen [  116.740000]  [<ffffffff8024a32b>] kthread+0x4b/0x80
Oct 12 10:23:14 treogen [  116.740000]  [<ffffffff8020c9d8>] child_rip+0xa/0x12
Oct 12 10:23:14 treogen [  116.740000]  [<ffffffff8024a2e0>] kthread+0x0/0x80
Oct 12 10:23:14 treogen [  116.740000]  [<ffffffff8020c9ce>] child_rip+0x0/0x12
Oct 12 10:23:14 treogen [  116.740000]
Oct 12 10:23:14 treogen [  116.770000] sd 2:0:0:0: [sdc] 625142448
512-byte hardware sectors (320073 MB)
Oct 12 10:23:14 treogen [  116.770000] sd 2:0:0:0: [sdc] Write Protect is off
Oct 12 10:23:14 treogen [  116.770000] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
Oct 12 10:23:14 treogen [  116.770000] sd 2:0:0:0: [sdc] Write cache:
enabled, read cache: enabled, doesn't support DPO or FUA
Oct 12 10:23:24 treogen [  126.740000] ata3.00: exception Emask 0x0
SAct 0x0 SErr 0x0 action 0x2 frozen
Oct 12 10:23:24 treogen [  126.740000] ata3.00: cmd
b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 0
Oct 12 10:23:24 treogen [  126.740000]          res
40/00:00:01:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
Oct 12 10:23:24 treogen [  126.740000] ata3.00: status: { DRDY }
Oct 12 10:23:24 treogen [  127.070000] ata3: soft resetting link
Oct 12 10:23:25 treogen [  127.230000] ata3: SATA link up 3.0 Gbps
(SStatus 123 SControl 300)
Oct 12 10:23:25 treogen [  127.370000] ata3.00: configured for UDMA/133
Oct 12 10:23:25 treogen [  127.370000] ata3: EH complete
Oct 12 10:23:25 treogen [  127.370000] sd 2:0:0:0: [sdc] 625142448
512-byte hardware sectors (320073 MB)
Oct 12 10:23:25 treogen [  127.370000] sd 2:0:0:0: [sdc] Write Protect is off
Oct 12 10:23:25 treogen [  127.370000] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
Oct 12 10:23:25 treogen [  127.370000] sd 2:0:0:0: [sdc] Write cache:
enabled, read cache: enabled, doesn't support DPO or FUA
Oct 12 10:23:25 treogen smartd[6091]: Device: /dev/sdc, is SMART

Torsten

Torsten Kaiser

2007-10-12 12:46 UTC #18 lore raw

Quoted 5 lines · Andrew Morton

Quoted 2 lines · On Fri, 12 Oct 2007 10:31:42 +0200 "Torsten Kaiser"…
But I did add the patch from http://lkml.org/lkml/2007/10/11/48 as my personal hotfix.
I think Jeff has that in hand?

I would more expect Jens, as the breakage in ata_sg_is_last comes through the sglist patches from the block gittree.

That comment was more to say, that this patch does not blow up. ;)

Quoted 4 lines

Quoted 2 lines
Oct 12 10:23:03 treogen smartd[6091]: Device: /dev/sdc, not found in
smartd database.
hm.

smartd always said that. Never thought that it would matter. And it also say this about the other two identical drives that are connected via the SiI 3132 instead the MCP55. And until now smartd worked with this drive, logging temperature changes into /var/log/messages.

hm: Even with the warnings below it does that:

Oct 12 10:53:25 treogen smartd[6095]: Device: /dev/sdc, SMART Usage
Attribute: 195 Hardware_ECC_Recovered changed from 57 to 58
Oct 12 11:23:26 treogen smartd[6095]: Device: /dev/sdc, SMART Usage
Attribute: 190 Temperature_Celsius changed from 51 to 50
Oct 12 11:23:26 treogen smartd[6095]: Device: /dev/sdc, SMART Usage
Attribute: 194 Temperature_Celsius changed from 49 to 50
Oct 12 13:23:25 treogen smartd[6095]: Device: /dev/sdc, SMART Usage

Attribute: 195 Hardware_ECC_Recovered changed from 58 to 57

But I have not seen any new WARNINGs...

Torsten

Quoted 140 lines

Quoted 2 lines

Oct 12 10:23:03 treogen [  105.990000] WARNING: at
drivers/ata/libata-core.c:5752 ata_qc_issue()

Let's cc linux-ide.

Quoted 134 lines

Oct 12 10:23:03 treogen [  105.990000]
Oct 12 10:23:03 treogen [  105.990000] Call Trace:
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff804442ef>]
ata_qc_issue+0x47f/0x540
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff80432e60>] scsi_done+0x0/0x20
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff80449c80>]
ata_scsi_flush_xlat+0x0/0x30
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff8044a6ea>]
ata_scsi_translate+0xfa/0x180
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff80432e60>] scsi_done+0x0/0x20
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff8044d84d>]
ata_scsi_queuecmd+0x12d/0x210
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff804333d0>]
scsi_dispatch_cmd+0x150/0x250
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff804391f1>]
scsi_request_fn+0x1f1/0x360
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff8039b827>]
elv_insert+0x167/0x250
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff803a0ac2>]
__make_request+0xe2/0x670
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff8039d560>]
generic_make_request+0x1d0/0x3c0
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff802bc1b9>]
bio_alloc_bioset+0xb9/0x140
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff802bc061>]
__bio_clone+0x91/0xc0
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff8039d7b6>]
submit_bio+0x66/0xf0
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff804cc06e>]
write_page+0x16e/0x2c0
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff80231b01>]
dequeue_task_fair+0x51/0xb0
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff804c482d>]
md_update_sb+0x18d/0x320
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff804caa10>] md_thread+0x0/0x100
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff804c9065>]
md_check_recovery+0x1f5/0x550
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff804caa10>] md_thread+0x0/0x100
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff804bf1d3>] raid5d+0x23/0x490
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff8023eb12>]
try_to_del_timer_sync+0x52/0x60
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff805b0057>]
schedule_timeout+0x67/0xd0
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff8023e740>]
process_timeout+0x0/0x10
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff805b004a>]
schedule_timeout+0x5a/0xd0
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff804caa10>] md_thread+0x0/0x100
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff804caa40>]
md_thread+0x30/0x100
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff8024a710>]
autoremove_wake_function+0x0/0x30
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff804caa10>] md_thread+0x0/0x100
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff8024a32b>] kthread+0x4b/0x80
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff8020c9d8>] child_rip+0xa/0x12
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff8024a2e0>] kthread+0x0/0x80
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff8020c9ce>] child_rip+0x0/0x12
Oct 12 10:23:03 treogen [  105.990000]
Oct 12 10:23:13 treogen [  115.940000] ata3.00: exception Emask 0x0
SAct 0x0 SErr 0x0 action 0x2 frozen
Oct 12 10:23:13 treogen [  115.940000] ata3.00: cmd
b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 0
Oct 12 10:23:13 treogen [  115.940000]          res
40/00:00:01:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
Oct 12 10:23:13 treogen [  115.940000] ata3.00: status: { DRDY }
Oct 12 10:23:14 treogen [  116.270000] ata3: soft resetting link
Oct 12 10:23:14 treogen [  116.430000] ata3: SATA link up 3.0 Gbps
(SStatus 123 SControl 300)
Oct 12 10:23:14 treogen [  116.740000] ata3.00: configured for UDMA/133
Oct 12 10:23:14 treogen [  116.740000] ata3: EH complete
Oct 12 10:23:14 treogen [  116.740000] WARNING: at
drivers/ata/libata-core.c:5752 ata_qc_issue()
Oct 12 10:23:14 treogen [  116.740000]
Oct 12 10:23:14 treogen [  116.740000] Call Trace:
Oct 12 10:23:14 treogen [  116.740000]  [<ffffffff804442ef>]
ata_qc_issue+0x47f/0x540
Oct 12 10:23:14 treogen [  116.740000]  [<ffffffff80432e60>] scsi_done+0x0/0x20
Oct 12 10:23:14 treogen [  116.740000]  [<ffffffff80449c80>]
ata_scsi_flush_xlat+0x0/0x30
Oct 12 10:23:14 treogen [  116.740000]  [<ffffffff8044a6ea>]
ata_scsi_translate+0xfa/0x180
Oct 12 10:23:14 treogen [  116.740000]  [<ffffffff80432e60>] scsi_done+0x0/0x20
Oct 12 10:23:14 treogen [  116.740000]  [<ffffffff8044d84d>]
ata_scsi_queuecmd+0x12d/0x210
Oct 12 10:23:14 treogen [  116.740000]  [<ffffffff804333d0>]
scsi_dispatch_cmd+0x150/0x250
Oct 12 10:23:14 treogen [  116.740000]  [<ffffffff804391f1>]
scsi_request_fn+0x1f1/0x360
Oct 12 10:23:14 treogen [  116.740000]  [<ffffffff80436b80>]
scsi_error_handler+0x0/0x310
Oct 12 10:23:14 treogen [  116.740000]  [<ffffffff8039fe73>]
blk_run_queue+0x43/0x80
Oct 12 10:23:14 treogen [  116.740000]  [<ffffffff80438659>]
scsi_run_host_queues+0x19/0x40
Oct 12 10:23:14 treogen [  116.740000]  [<ffffffff80436d54>]
scsi_error_handler+0x1d4/0x310
Oct 12 10:23:14 treogen [  116.740000]  [<ffffffff80436b80>]
scsi_error_handler+0x0/0x310
Oct 12 10:23:14 treogen [  116.740000]  [<ffffffff8024a32b>] kthread+0x4b/0x80
Oct 12 10:23:14 treogen [  116.740000]  [<ffffffff8020c9d8>] child_rip+0xa/0x12
Oct 12 10:23:14 treogen [  116.740000]  [<ffffffff8024a2e0>] kthread+0x0/0x80
Oct 12 10:23:14 treogen [  116.740000]  [<ffffffff8020c9ce>] child_rip+0x0/0x12
Oct 12 10:23:14 treogen [  116.740000]
Oct 12 10:23:14 treogen [  116.770000] sd 2:0:0:0: [sdc] 625142448
512-byte hardware sectors (320073 MB)
Oct 12 10:23:14 treogen [  116.770000] sd 2:0:0:0: [sdc] Write Protect is off
Oct 12 10:23:14 treogen [  116.770000] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
Oct 12 10:23:14 treogen [  116.770000] sd 2:0:0:0: [sdc] Write cache:
enabled, read cache: enabled, doesn't support DPO or FUA
Oct 12 10:23:24 treogen [  126.740000] ata3.00: exception Emask 0x0
SAct 0x0 SErr 0x0 action 0x2 frozen
Oct 12 10:23:24 treogen [  126.740000] ata3.00: cmd
b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 0
Oct 12 10:23:24 treogen [  126.740000]          res
40/00:00:01:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
Oct 12 10:23:24 treogen [  126.740000] ata3.00: status: { DRDY }
Oct 12 10:23:24 treogen [  127.070000] ata3: soft resetting link
Oct 12 10:23:25 treogen [  127.230000] ata3: SATA link up 3.0 Gbps
(SStatus 123 SControl 300)
Oct 12 10:23:25 treogen [  127.370000] ata3.00: configured for UDMA/133
Oct 12 10:23:25 treogen [  127.370000] ata3: EH complete
Oct 12 10:23:25 treogen [  127.370000] sd 2:0:0:0: [sdc] 625142448
512-byte hardware sectors (320073 MB)
Oct 12 10:23:25 treogen [  127.370000] sd 2:0:0:0: [sdc] Write Protect is off
Oct 12 10:23:25 treogen [  127.370000] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
Oct 12 10:23:25 treogen [  127.370000] sd 2:0:0:0: [sdc] Write cache:
enabled, read cache: enabled, doesn't support DPO or FUA
Oct 12 10:23:25 treogen smartd[6091]: Device: /dev/sdc, is SMART

Torsten

Torsten Kaiser

2007-10-13 08:01 UTC #19 lore raw

In reply to Andrew Morton

Quoted 4 lines · Andrew Morton

Quoted 2 lines · On Fri, 12 Oct 2007 10:31:42 +0200 "Torsten Kaiser"…
Oct 12 10:23:03 treogen smartd[6091]: Device: /dev/sdc, not found in
smartd database.

Quoted 142 lines

hm.

Quoted 2 lines

Oct 12 10:23:03 treogen [  105.990000] WARNING: at
drivers/ata/libata-core.c:5752 ata_qc_issue()

Let's cc linux-ide.

Quoted 134 lines

Oct 12 10:23:03 treogen [  105.990000]
Oct 12 10:23:03 treogen [  105.990000] Call Trace:
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff804442ef>]
ata_qc_issue+0x47f/0x540
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff80432e60>] scsi_done+0x0/0x20
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff80449c80>]
ata_scsi_flush_xlat+0x0/0x30
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff8044a6ea>]
ata_scsi_translate+0xfa/0x180
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff80432e60>] scsi_done+0x0/0x20
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff8044d84d>]
ata_scsi_queuecmd+0x12d/0x210
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff804333d0>]
scsi_dispatch_cmd+0x150/0x250
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff804391f1>]
scsi_request_fn+0x1f1/0x360
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff8039b827>]
elv_insert+0x167/0x250
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff803a0ac2>]
__make_request+0xe2/0x670
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff8039d560>]
generic_make_request+0x1d0/0x3c0
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff802bc1b9>]
bio_alloc_bioset+0xb9/0x140
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff802bc061>]
__bio_clone+0x91/0xc0
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff8039d7b6>]
submit_bio+0x66/0xf0
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff804cc06e>]
write_page+0x16e/0x2c0
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff80231b01>]
dequeue_task_fair+0x51/0xb0
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff804c482d>]
md_update_sb+0x18d/0x320
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff804caa10>] md_thread+0x0/0x100
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff804c9065>]
md_check_recovery+0x1f5/0x550
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff804caa10>] md_thread+0x0/0x100
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff804bf1d3>] raid5d+0x23/0x490
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff8023eb12>]
try_to_del_timer_sync+0x52/0x60
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff805b0057>]
schedule_timeout+0x67/0xd0
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff8023e740>]
process_timeout+0x0/0x10
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff805b004a>]
schedule_timeout+0x5a/0xd0
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff804caa10>] md_thread+0x0/0x100
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff804caa40>]
md_thread+0x30/0x100
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff8024a710>]
autoremove_wake_function+0x0/0x30
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff804caa10>] md_thread+0x0/0x100
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff8024a32b>] kthread+0x4b/0x80
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff8020c9d8>] child_rip+0xa/0x12
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff8024a2e0>] kthread+0x0/0x80
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff8020c9ce>] child_rip+0x0/0x12
Oct 12 10:23:03 treogen [  105.990000]
Oct 12 10:23:13 treogen [  115.940000] ata3.00: exception Emask 0x0
SAct 0x0 SErr 0x0 action 0x2 frozen
Oct 12 10:23:13 treogen [  115.940000] ata3.00: cmd
b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 0
Oct 12 10:23:13 treogen [  115.940000]          res
40/00:00:01:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
Oct 12 10:23:13 treogen [  115.940000] ata3.00: status: { DRDY }
Oct 12 10:23:14 treogen [  116.270000] ata3: soft resetting link
Oct 12 10:23:14 treogen [  116.430000] ata3: SATA link up 3.0 Gbps
(SStatus 123 SControl 300)
Oct 12 10:23:14 treogen [  116.740000] ata3.00: configured for UDMA/133
Oct 12 10:23:14 treogen [  116.740000] ata3: EH complete
Oct 12 10:23:14 treogen [  116.740000] WARNING: at
drivers/ata/libata-core.c:5752 ata_qc_issue()
Oct 12 10:23:14 treogen [  116.740000]
Oct 12 10:23:14 treogen [  116.740000] Call Trace:
Oct 12 10:23:14 treogen [  116.740000]  [<ffffffff804442ef>]
ata_qc_issue+0x47f/0x540
Oct 12 10:23:14 treogen [  116.740000]  [<ffffffff80432e60>] scsi_done+0x0/0x20
Oct 12 10:23:14 treogen [  116.740000]  [<ffffffff80449c80>]
ata_scsi_flush_xlat+0x0/0x30
Oct 12 10:23:14 treogen [  116.740000]  [<ffffffff8044a6ea>]
ata_scsi_translate+0xfa/0x180
Oct 12 10:23:14 treogen [  116.740000]  [<ffffffff80432e60>] scsi_done+0x0/0x20
Oct 12 10:23:14 treogen [  116.740000]  [<ffffffff8044d84d>]
ata_scsi_queuecmd+0x12d/0x210
Oct 12 10:23:14 treogen [  116.740000]  [<ffffffff804333d0>]
scsi_dispatch_cmd+0x150/0x250
Oct 12 10:23:14 treogen [  116.740000]  [<ffffffff804391f1>]
scsi_request_fn+0x1f1/0x360
Oct 12 10:23:14 treogen [  116.740000]  [<ffffffff80436b80>]
scsi_error_handler+0x0/0x310
Oct 12 10:23:14 treogen [  116.740000]  [<ffffffff8039fe73>]
blk_run_queue+0x43/0x80
Oct 12 10:23:14 treogen [  116.740000]  [<ffffffff80438659>]
scsi_run_host_queues+0x19/0x40
Oct 12 10:23:14 treogen [  116.740000]  [<ffffffff80436d54>]
scsi_error_handler+0x1d4/0x310
Oct 12 10:23:14 treogen [  116.740000]  [<ffffffff80436b80>]
scsi_error_handler+0x0/0x310
Oct 12 10:23:14 treogen [  116.740000]  [<ffffffff8024a32b>] kthread+0x4b/0x80
Oct 12 10:23:14 treogen [  116.740000]  [<ffffffff8020c9d8>] child_rip+0xa/0x12
Oct 12 10:23:14 treogen [  116.740000]  [<ffffffff8024a2e0>] kthread+0x0/0x80
Oct 12 10:23:14 treogen [  116.740000]  [<ffffffff8020c9ce>] child_rip+0x0/0x12
Oct 12 10:23:14 treogen [  116.740000]
Oct 12 10:23:14 treogen [  116.770000] sd 2:0:0:0: [sdc] 625142448
512-byte hardware sectors (320073 MB)
Oct 12 10:23:14 treogen [  116.770000] sd 2:0:0:0: [sdc] Write Protect is off
Oct 12 10:23:14 treogen [  116.770000] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
Oct 12 10:23:14 treogen [  116.770000] sd 2:0:0:0: [sdc] Write cache:
enabled, read cache: enabled, doesn't support DPO or FUA
Oct 12 10:23:24 treogen [  126.740000] ata3.00: exception Emask 0x0
SAct 0x0 SErr 0x0 action 0x2 frozen
Oct 12 10:23:24 treogen [  126.740000] ata3.00: cmd
b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 0
Oct 12 10:23:24 treogen [  126.740000]          res
40/00:00:01:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
Oct 12 10:23:24 treogen [  126.740000] ata3.00: status: { DRDY }
Oct 12 10:23:24 treogen [  127.070000] ata3: soft resetting link
Oct 12 10:23:25 treogen [  127.230000] ata3: SATA link up 3.0 Gbps
(SStatus 123 SControl 300)
Oct 12 10:23:25 treogen [  127.370000] ata3.00: configured for UDMA/133
Oct 12 10:23:25 treogen [  127.370000] ata3: EH complete
Oct 12 10:23:25 treogen [  127.370000] sd 2:0:0:0: [sdc] 625142448
512-byte hardware sectors (320073 MB)
Oct 12 10:23:25 treogen [  127.370000] sd 2:0:0:0: [sdc] Write Protect is off
Oct 12 10:23:25 treogen [  127.370000] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
Oct 12 10:23:25 treogen [  127.370000] sd 2:0:0:0: [sdc] Write cache:
enabled, read cache: enabled, doesn't support DPO or FUA
Oct 12 10:23:25 treogen smartd[6091]: Device: /dev/sdc, is SMART

Torsten

On the next boot no WARNING show up.
On the third boot with 2.6.23-mm1 the drive failed completely:
First I got this WARNING:

Oct 13 07:46:48 treogen smartd[6081]: Device: /dev/sdc, opened
Oct 13 07:46:48 treogen [   99.850000] WARNING: at
drivers/ata/libata-core.c:5761 ata_qc_issue()
Oct 13 07:46:48 treogen [   99.850000]
Oct 13 07:46:48 treogen [   99.850000] Call Trace:
Oct 13 07:46:48 treogen [   99.850000]  [<ffffffff8044431a>]
ata_qc_issue+0x4aa/0x540
Oct 13 07:46:48 treogen [   99.850000]  [<ffffffff80432e60>] scsi_done+0x0/0x20
Oct 13 07:46:48 treogen [   99.850000]  [<ffffffff8044ce30>]
ata_scsi_pass_thru+0x0/0x2c0
Oct 13 07:46:48 treogen [   99.850000]  [<ffffffff8044a6ea>]
ata_scsi_translate+0xfa/0x180
Oct 13 07:46:48 treogen [   99.850000]  [<ffffffff80432e60>] scsi_done+0x0/0x20
Oct 13 07:46:48 treogen [   99.850000]  [<ffffffff8044d84d>]
ata_scsi_queuecmd+0x12d/0x210
Oct 13 07:46:48 treogen [   99.850000]  [<ffffffff804333d0>]
scsi_dispatch_cmd+0x150/0x250
Oct 13 07:46:48 treogen smartd[6081]: Device: /dev/sdc, not found in
smartd database.
Oct 13 07:46:48 treogen [   99.850000]  [<ffffffff804391f1>]
scsi_request_fn+0x1f1/0x360
Oct 13 07:46:48 treogen [   99.850000]  [<ffffffff8039f362>]
blk_execute_rq_nowait+0x62/0xb0
Oct 13 07:46:48 treogen [   99.850000]  [<ffffffff8039f446>]
blk_execute_rq+0x96/0x110
Oct 13 07:46:48 treogen [   99.850000]  [<ffffffff8039f5b1>]
get_request_wait+0x21/0x1a0
Oct 13 07:46:48 treogen [   99.850000]  [<ffffffff8022c8ea>]
__wake_up_common+0x5a/0x90
Oct 13 07:46:48 treogen [   99.850000]  [<ffffffff80438e14>]
scsi_execute+0xe4/0x120
Oct 13 07:46:48 treogen [   99.850000]  [<ffffffff8044cb14>]
ata_cmd_ioctl+0x124/0x270
Oct 13 07:46:48 treogen [   99.850000]  [<ffffffff8044cd67>]
ata_scsi_ioctl+0x107/0x1d0
Oct 13 07:46:48 treogen [   99.850000]  [<ffffffff8043424c>]
scsi_ioctl+0xbc/0x330
Oct 13 07:46:48 treogen [   99.850000]  [<ffffffff803a14f3>]
blkdev_driver_ioctl+0x93/0xa0
Oct 13 07:46:48 treogen [   99.850000]  [<ffffffff803a1766>]
blkdev_ioctl+0x266/0x7c0
Oct 13 07:46:48 treogen [   99.850000]  [<ffffffff8022c8ea>]
__wake_up_common+0x5a/0x90
Oct 13 07:46:48 treogen [   99.850000]  [<ffffffff8022c8ea>]
__wake_up_common+0x5a/0x90
Oct 13 07:46:48 treogen [   99.850000]  [<ffffffff8022d543>] __wake_up+0x43/0x70
Oct 13 07:46:48 treogen [   99.850000]  [<ffffffff802babba>]
invalidate_inode_buffers+0x2a/0x100
Oct 13 07:46:48 treogen [   99.850000]  [<ffffffff8024a5e0>]
bit_waitqueue+0x10/0xd0
Oct 13 07:46:48 treogen [   99.850000]  [<ffffffff802bd08b>]
block_ioctl+0x1b/0x30
Oct 13 07:46:48 treogen [   99.850000]  [<ffffffff802a08bf>] do_ioctl+0x2f/0xa0
Oct 13 07:46:48 treogen [   99.850000]  [<ffffffff802a0b50>]
vfs_ioctl+0x220/0x2d0
Oct 13 07:46:48 treogen [   99.850000]  [<ffffffff802a0c91>] sys_ioctl+0x91/0xb0
Oct 13 07:46:48 treogen [   99.850000]  [<ffffffff8020bbbe>]
system_call+0x7e/0x83
Oct 13 07:46:48 treogen [   99.850000]
Oct 13 07:46:48 treogen [   99.850000] ata3: EH in SWNCQ
mode,QC:qc_active 0x3 sactive 0x1
Oct 13 07:46:48 treogen [   99.850000] ata3: SWNCQ:qc_active 0x1
defer_bits 0x0 last_issue_tag 0x0
Oct 13 07:46:48 treogen [   99.850000]   dhfis 0x1 dmafis 0x0 sdbfis 0x0
Oct 13 07:46:48 treogen [   99.850000] ata3: ATA_REG 0x51 ERR_REG 0x4
Oct 13 07:46:48 treogen [   99.850000] ata3: tag : dhfis dmafis sdbfis sacitve
Oct 13 07:46:48 treogen [   99.850000] ata3: tag 0x0: 1 0 0 1
Oct 13 07:46:48 treogen [   99.850000] ata3.00: exception Emask 0x1
SAct 0x1 SErr 0x0 action 0x6 frozen
Oct 13 07:46:48 treogen [   99.850000] ata3.00: Ata error. fis:0x41
Oct 13 07:46:48 treogen [   99.850000] ata3.00: cmd
60/30:00:d1:6b:db/00:00:18:00:00/40 tag 0 cdb 0x0 data 24576 in
Oct 13 07:46:48 treogen [   99.850000]          res
51/04:00:01:4f:c2/04:00:d1:6b:db/00 Emask 0x1 (device error)
Oct 13 07:46:48 treogen [   99.850000] ata3.00: status: { DRDY ERR }
Oct 13 07:46:48 treogen [   99.850000] ata3.00: error: { ABRT }
Oct 13 07:46:48 treogen [   99.850000] ata3.00: cmd
b0/d8:00:01:4f:c2/00:00:00:00:00/00 tag 1 cdb 0x0 data 0
Oct 13 07:46:48 treogen [   99.850000]          res
51/04:00:01:4f:c2/00:00:00:00:00/00 Emask 0x1 (device error)
Oct 13 07:46:48 treogen [   99.850000] ata3.00: status: { DRDY ERR }
Oct 13 07:46:48 treogen [   99.850000] ata3.00: error: { ABRT }
Oct 13 07:46:48 treogen [   99.850000] ata3: hard resetting link
Oct 13 07:46:49 treogen [  100.360000] ata3: SATA link up 3.0 Gbps
(SStatus 123 SControl 300)
Oct 13 07:46:49 treogen [  100.510000] ata3.00: configured for UDMA/133
Oct 13 07:46:49 treogen [  100.510000] ata3: EH complete

then the other two WARNINGs again. (drivers/ata/libata-core.c:5752) After that the drive is inaccessible.

The last now "good" kernel for this problem is probable 2.6.23-rc8-mm1. That version only had the sata_sil24-bug (ata_sg_is_last). I only booted 2.6.23-rc8-mm2 one time and that one try did not complete bootup. But was neither able to see the complete OOPS or save it. And as I was still trying to find the other bug, I did not investigate more.

Torsten

Jeff Garzik

2007-10-13 10:55 UTC #20 lore raw

Quoted 18 lines · Torsten Kaiser

Quoted 16 lines · Andrew Morton
Quoted 2 lines · On Fri, 12 Oct 2007 10:31:42 +0200 "Torsten Kaiser"…
Oct 12 10:23:03 treogen smartd[6091]: Device: /dev/sdc, not found in
smartd database.
hm.
Quoted 2 lines
Oct 12 10:23:03 treogen [  105.990000] WARNING: at
drivers/ata/libata-core.c:5752 ata_qc_issue()
Let's cc linux-ide.
Quoted 7 lines
Oct 12 10:23:03 treogen [  105.990000]
Oct 12 10:23:03 treogen [  105.990000] Call Trace:
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff804442ef>]
ata_qc_issue+0x47f/0x540
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff80432e60>] scsi_done+0x0/0x20
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff80449c80>]
ata_scsi_flush_xlat+0x0/0x30

Quoted 5 lines

Oct 13 07:46:48 treogen [   99.850000]
Oct 13 07:46:48 treogen [   99.850000] ata3: EH in SWNCQ
mode,QC:qc_active 0x3 sactive 0x1
Oct 13 07:46:48 treogen [   99.850000] ata3: SWNCQ:qc_active 0x1

defer_bits 0x0 last_issue_tag 0x0

The WARNING indicates that there is a SWNCQ bug in sata_nv. Given that the problem appears when SYNCHRONIZE CACHE is being issued, I would guess that sata_nv is not properly handling non-queued commands.

NVIDIA CC'd.

This is a patch from libata-dev.git#nv-swncq (via #ALL).

Jeff

Torsten Kaiser

2007-10-13 12:03 UTC #21 lore raw

Quoted 19 lines · Jeff Garzik

Quoted 17 lines · Torsten Kaiser
Quoted 16 lines · Andrew Morton
Quoted 2 lines · On Fri, 12 Oct 2007 10:31:42 +0200 "Torsten Kaiser"…
Oct 12 10:23:03 treogen smartd[6091]: Device: /dev/sdc, not found in
smartd database.
hm.
Quoted 2 lines
Oct 12 10:23:03 treogen [  105.990000] WARNING: at
drivers/ata/libata-core.c:5752 ata_qc_issue()
Let's cc linux-ide.
Quoted 7 lines
Oct 12 10:23:03 treogen [  105.990000]
Oct 12 10:23:03 treogen [  105.990000] Call Trace:
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff804442ef>]
ata_qc_issue+0x47f/0x540
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff80432e60>] scsi_done+0x0/0x20
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff80449c80>]
ata_scsi_flush_xlat+0x0/0x30

Quoted 8 lines

Quoted 5 lines
Oct 13 07:46:48 treogen [   99.850000]
Oct 13 07:46:48 treogen [   99.850000] ata3: EH in SWNCQ
mode,QC:qc_active 0x3 sactive 0x1
Oct 13 07:46:48 treogen [   99.850000] ata3: SWNCQ:qc_active 0x1
defer_bits 0x0 last_issue_tag 0x0
The WARNING indicates that there is a SWNCQ bug in sata_nv. Given that the problem appears when SYNCHRONIZE CACHE is being issued, I would

I can't follow you on SYNCHRONIZE CACHE.
The only command written to the syslog in the errors where 0x60==ATA_CMD_FPDMA_READ and 0xB0 (which is not in include/linux/ata.h, but ATA-6 says that this is SMART related. That makes sense, as smartd is failing).

Quoted 1 line

guess that sata_nv is not properly handling non-queued commands.

But that still seems correct, as I would not expect that SMART commands get queued. (Thats just a guess, as I did not try to find the code that does this distinction)

Quoted 1 line

This is a patch from libata-dev.git#nv-swncq (via #ALL).

Comparing sata_nv.c from 2.6.23-rc8-mm1 and 2.6.23-mm1 I see two changes, that look suspicious:

http://git.kernel.org/?p=linux/kernel/git/jgarzik/libata-dev.git;a=commitdiff;h=31cc23b34913bc173680bdc87af79e551bf8cc0d

The comment says: "ahci and sata_sil24 are converted to use ata_std_qc_defer()." But the patch also adds ".qc_defer = ata_std_qc_defer," to sata_nv.c

The second change is the removal of the 'lock' spinlock from sata_nv.c that was used in nv_swncq_qc_issue and nv_swncq_host_interrupt.

Should I try to revert one or both of these changes?

Torsten

Jeff Garzik

2007-10-13 12:19 UTC #22 lore raw

Quoted 24 lines · Torsten Kaiser

Quoted 23 lines · Jeff Garzik
Quoted 22 lines · Torsten Kaiser
Quoted 16 lines · Andrew Morton
Quoted 2 lines · On Fri, 12 Oct 2007 10:31:42 +0200 "Torsten Kaiser"…
Oct 12 10:23:03 treogen smartd[6091]: Device: /dev/sdc, not found in
smartd database.
hm.
Quoted 2 lines
Oct 12 10:23:03 treogen [  105.990000] WARNING: at
drivers/ata/libata-core.c:5752 ata_qc_issue()
Let's cc linux-ide.
Quoted 7 lines
Oct 12 10:23:03 treogen [  105.990000]
Oct 12 10:23:03 treogen [  105.990000] Call Trace:
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff804442ef>]
ata_qc_issue+0x47f/0x540
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff80432e60>] scsi_done+0x0/0x20
Oct 12 10:23:03 treogen [  105.990000]  [<ffffffff80449c80>]
ata_scsi_flush_xlat+0x0/0x30
Oct 13 07:46:48 treogen [   99.850000]
Oct 13 07:46:48 treogen [   99.850000] ata3: EH in SWNCQ
mode,QC:qc_active 0x3 sactive 0x1
Oct 13 07:46:48 treogen [   99.850000] ata3: SWNCQ:qc_active 0x1
defer_bits 0x0 last_issue_tag 0x0

Quoted 8 lines

Quoted 2 lines
The WARNING indicates that there is a SWNCQ bug in sata_nv. Given that the problem appears when SYNCHRONIZE CACHE is being issued, I would
I can't follow you on SYNCHRONIZE CACHE.
The only command written to the syslog in the errors where 0x60==ATA_CMD_FPDMA_READ and 0xB0 (which is not in include/linux/ata.h, but ATA-6 says that this is SMART related. That makes sense, as smartd is failing).

In the traceback you have "ata_scsi_flush_xlat", which is the function that translates a SCSI sync-cache command into an ATA flush-cache command.

The "WARNING: at drivers/ata/libata-core.c:5752 ata_qc_issue()" also guides us to the code comment

/* Make sure only one non-NCQ command is outstanding. The
* check is skipped for old EH because it reuses active qc to
* request ATAPI sense.
*/

which is a check related to NCQ->off and off->NCQ edge cases.

So those are the two bits of information I found interesting.

Quoted 13 lines

Quoted 1 line
guess that sata_nv is not properly handling non-queued commands.
But that still seems correct, as I would not expect that SMART commands get queued. (Thats just a guess, as I did not try to find the code that does this distinction)
Quoted 1 line
This is a patch from libata-dev.git#nv-swncq (via #ALL).
Comparing sata_nv.c from 2.6.23-rc8-mm1 and 2.6.23-mm1 I see two changes, that look suspicious:
http://git.kernel.org/?p=linux/kernel/git/jgarzik/libata-dev.git;a=commitdiff;h=31cc23b34913bc173680bdc87af79e551bf8cc0d

Quoted 7 lines

The comment says: "ahci and sata_sil24 are converted to use ata_std_qc_defer()." But the patch also adds ".qc_defer = ata_std_qc_defer," to sata_nv.c
The second change is the removal of the 'lock' spinlock from sata_nv.c that was used in nv_swncq_qc_issue and nv_swncq_host_interrupt.
Should I try to revert one or both of these changes?

If you are git-capable, IMO the next steps in problem elimination should be

* download latest linux-2.6.git (currently 752097cec53eea111d087c545179b421e2bde98a)
* build and test linux-2.6.git, to establish a new baseline
* download latest libata-dev.git#nv-swncq (currently 3cb664c2d319a4fde5028c3c5dab6221fe70bd2d)
* build and test, with sata_nv module option swncq=0
* build and test, with sata_nv module option swncq=1

That will get -mm out of the picture, use the same baseline kernel for all three tests (nv-swncq is based off of 752097cec53eea111d087c545179b421e2bde98a) and narrow things down to the precise changes that went upstream (or are on the 'nv-swncq' branch, waiting to go upstream).

My gut feeling is that there is a lingering bug in sata_nv SWNCQ somewhere.

Jeff

Torsten Kaiser

2007-10-13 14:32 UTC #23 lore raw

Quoted 11 lines · Jeff Garzik

Quoted 7 lines · Torsten Kaiser
Quoted 1 line · Jeff Garzik
Torsten Kaiser wrote:
I can't follow you on SYNCHRONIZE CACHE.
The only command written to the syslog in the errors where 0x60==ATA_CMD_FPDMA_READ and 0xB0 (which is not in include/linux/ata.h, but ATA-6 says that this is SMART related. That makes sense, as smartd is failing).
In the traceback you have "ata_scsi_flush_xlat", which is the function that translates a SCSI sync-cache command into an ATA flush-cache command.

Aha. That makes sense.
But on the second error, where the drive was kicked out completely all three traces did not have ata_scsi_flush_xlat.
First WARNING:

Oct 13 07:46:48 treogen [   99.850000] Call Trace:
Oct 13 07:46:48 treogen [   99.850000]  [<ffffffff8044431a>]
ata_qc_issue+0x4aa/0x540
Oct 13 07:46:48 treogen [   99.850000]  [<ffffffff80432e60>] scsi_done+0x0/0x20
Oct 13 07:46:48 treogen [   99.850000]  [<ffffffff8044ce30>]
ata_scsi_pass_thru+0x0/0x2c0
Oct 13 07:46:48 treogen [   99.850000]  [<ffffffff8044a6ea>]
ata_scsi_translate+0xfa/0x180
Oct 13 07:46:48 treogen [   99.850000]  [<ffffffff80432e60>] scsi_done+0x0/0x20

...

Second+Third:

Oct 13 07:46:49 treogen [  100.510000]  [<ffffffff804442ef>]
ata_qc_issue+0x47f/0x540
Oct 13 07:46:49 treogen [  100.510000]  [<ffffffff80432e60>] scsi_done+0x0/0x20
Oct 13 07:46:49 treogen [  100.510000]  [<ffffffff80432e60>] scsi_done+0x0/0x20
Oct 13 07:46:49 treogen [  100.510000]  [<ffffffff8044a440>]
ata_scsi_rw_xlat+0x0/0x1b0
Oct 13 07:46:49 treogen [  100.510000]  [<ffffffff8044a6ea>]
ata_scsi_translate+0xfa/0x180
Oct 13 07:46:49 treogen [  100.510000]  [<ffffffff80432e60>] scsi_done+0x0/0x20

...

So the commands that generate the WARNINGs seem only later collateral damage.

Quoted 11 lines

The "WARNING: at drivers/ata/libata-core.c:5752 ata_qc_issue()" also guides us to the code comment
/* Make sure only one non-NCQ command is outstanding. The
* check is skipped for old EH because it reuses active qc to
* request ATAPI sense.
*/
which is a check related to NCQ->off and off->NCQ edge cases.
So those are the two bits of information I found interesting.

But I very much agree about this. But rather than 'normal' edges with the cache flushes, I would blame it on the SMART commands from smartd that trigger the switch.
Both errors happend during the startup of smartd.

Quoted 8 lines

Quoted 8 lines
Quoted 1 line
guess that sata_nv is not properly handling non-queued commands.
But that still seems correct, as I would not expect that SMART commands get queued. (Thats just a guess, as I did not try to find the code that does this distinction)
Quoted 1 line
This is a patch from libata-dev.git#nv-swncq (via #ALL).

Quoted 7 lines

Quoted 7 lines
Comparing sata_nv.c from 2.6.23-rc8-mm1 and 2.6.23-mm1 I see two changes, that look suspicious:
http://git.kernel.org/?p=linux/kernel/git/jgarzik/libata-dev.git;a=commitdiff;h=31cc23b34913bc173680bdc87af79e551bf8cc0d
The comment says: "ahci and sata_sil24 are converted to use ata_std_qc_defer()." But the patch also adds ".qc_defer = ata_std_qc_defer," to sata_nv.c

Looking more at this patch, I thing the code change is correct and only the comment is missing sata_nv. (Only ahci, sil24 and nv seem to use NCQ und so need the logic from qc_defer)

Quoted 6 lines

Quoted 4 lines
The second change is the removal of the 'lock' spinlock from sata_nv.c that was used in nv_swncq_qc_issue and nv_swncq_host_interrupt.
Should I try to revert one or both of these changes?
If you are git-capable, IMO the next steps in problem elimination should be

... I should really take the time install this, but I don't think git will help in this special case, because:

Quoted 3 lines

* download latest linux-2.6.git (currently 752097cec53eea111d087c545179b421e2bde98a)
* build and test linux-2.6.git, to establish a new baseline

2.6.23-rc8-mm1 worked.

Quoted 2 lines

* download latest libata-dev.git#nv-swncq (currently 3cb664c2d319a4fde5028c3c5dab6221fe70bd2d)

That commit (3cb664c2d319a4fde5028c3c5dab6221fe70bd2d) seems to be the only commit relevant to swncq, as it adds it completely without any partial steps that could be bisected.

Quoted 2 lines

* build and test, with sata_nv module option swncq=0
* build and test, with sata_nv module option swncq=1

I will try this. Currently I have sata_nv.swncq=1 in my kernel commandline so its trivial to change that.
But as only 2 out of 3 boots failed, I think I hit another heisenbug.

Quoted 1 line

My gut feeling is that there is a lingering bug in sata_nv SWNCQ somewhere.

Older versions of SWNCQ already worked for me, so I don't think its a general problem.
And as the symptoms would nicely fit into a race condition when manipulating the NCQ state, the removal of the lock protecting the private sata_nv defer_queue between 2.6.23-rc8-mm1 and 2.6.23-mm1 looks like the prime suspect.

So now booting with and without swncq and if swncq=0 works, I will try to add the lock back...

Torsten

Torsten Kaiser

2007-10-13 14:40 UTC #24 lore raw

Quoted 5 lines · Torsten Kaiser

Quoted 4 lines · Jeff Garzik
Quoted 3 lines · Torsten Kaiser
Comparing sata_nv.c from 2.6.23-rc8-mm1 and 2.6.23-mm1 I see two changes, that look suspicious:

Quoted 8 lines

Quoted 4 lines
Quoted 4 lines
http://git.kernel.org/?p=linux/kernel/git/jgarzik/libata-dev.git;a=commitdiff;h=31cc23b34913bc173680bdc87af79e551bf8cc0d
The comment says: "ahci and sata_sil24 are converted to use ata_std_qc_defer()." But the patch also adds ".qc_defer = ata_std_qc_defer," to sata_nv.c
Looking more at this patch, I thing the code change is correct and only the comment is missing sata_nv. (Only ahci, sil24 and nv seem to use NCQ und so need the logic from qc_defer)

Wait!

I think I found the bug: Its a evil interaction between the above patch and the swncq patch that is applied later.
The qc_defer patch removes the old ata_scmd_need_defer that was always called for all drivers and substitutes it for ata_std_qc_defer and adds it as aops->qc_defer to all drivers that support NCQ *at that point*.
Then the swncq patch adds a new NCQ capable driver, but the nobody added the qc_defer-ops to the ops-structure that is added. So swncq will never defer any commands and the first command that would need to be defered (the SMART commands) blows up, if there is still another command in flight.

I will only add the qc_defer and try this...

Torsten

Torsten Kaiser

2007-10-13 15:13 UTC #25 lore raw

Quoted 14 lines · Torsten Kaiser

Wait!
I think I found the bug: Its a evil interaction between the above patch and the swncq patch that is applied later.
The qc_defer patch removes the old ata_scmd_need_defer that was always called for all drivers and substitutes it for ata_std_qc_defer and adds it as aops->qc_defer to all drivers that support NCQ *at that point*.
Then the swncq patch adds a new NCQ capable driver, but the nobody added the qc_defer-ops to the ops-structure that is added. So swncq will never defer any commands and the first command that would need to be defered (the SMART commands) blows up, if there is still another command in flight.

Quoted 1 line

I will only add the qc_defer and try this...

3 boots, all worked. So I'm very sure that was the bug, but I will now do a little load testing...

The only strange thing about 2.6.23-mm1 is, that it takes ~4 second more to boot.

2.6.23-rc8-mm1:

[    3.720000] scsi0 : sata_sil24
[    3.730000] scsi1 : sata_sil24
[    3.740000] ata1: SATA max UDMA/100 irq 17
[    3.750000] ata2: SATA max UDMA/100 irq 17
[    4.110000] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    4.160000] ata1.00: ATA-7: MAXTOR STM3320820AS, 3.AAE, max UDMA/133
[    4.180000] ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32)
[    4.240000] ata1.00: configured for UDMA/100
[    4.600000] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    4.660000] ata2.00: ATA-7: MAXTOR STM3320820AS, 3.AAE, max UDMA/133
[    4.680000] ata2.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32)
[    4.730000] ata2.00: configured for UDMA/100

2.6.23-mm1:

[    3.650000] scsi0 : sata_sil24
[    3.660000] scsi1 : sata_sil24
[    3.660000] ata1: SATA max UDMA/100 host m128@0xefeffc00 port
0xefef8000 irq 17
[    3.690000] ata2: SATA max UDMA/100 host m128@0xefeffc00 port
0xefefa000 irq 17
[    5.930000] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
[    5.980000] ata1.00: ATA-7: MAXTOR STM3320820AS, 3.AAE, max UDMA/133
[    6.000000] ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32)
[    6.060000] ata1.00: configured for UDMA/100
[    8.290000] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
[    8.340000] ata2.00: ATA-7: MAXTOR STM3320820AS, 3.AAE, max UDMA/133
[    8.360000] ata2.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32)
[    8.420000] ata2.00: configured for UDMA/100

Torsten

Jeff Garzik

2007-10-13 17:48 UTC #26 lore raw

Quoted 15 lines · Torsten Kaiser

Quoted 14 lines · Torsten Kaiser
Wait!
I think I found the bug: Its a evil interaction between the above patch and the swncq patch that is applied later.
The qc_defer patch removes the old ata_scmd_need_defer that was always called for all drivers and substitutes it for ata_std_qc_defer and adds it as aops->qc_defer to all drivers that support NCQ *at that point*.
Then the swncq patch adds a new NCQ capable driver, but the nobody added the qc_defer-ops to the ops-structure that is added. So swncq will never defer any commands and the first command that would need to be defered (the SMART commands) blows up, if there is still another command in flight.

Quoted 7 lines

Quoted 1 line
I will only add the qc_defer and try this...
3 boots, all worked. So I'm very sure that was the bug, but I will now do a little load testing...
The only strange thing about 2.6.23-mm1 is, that it takes ~4 second more to boot.

So, you basically applied the attached patch?

Yeah, absence of qc_defer for an NCQ-capable chip would do it.

Jeff

drivers/ata/sata_nv.c +1 -0

index cf5c85e..240a892 100644
@@ -554,6 +554,7 @@ static const struct ata_port_operations nv_swncq_ops = {
 	.bmdma_start		= ata_bmdma_start,
 	.bmdma_stop		= ata_bmdma_stop,
 	.bmdma_status		= ata_bmdma_status,
+	.qc_defer		= ata_std_qc_defer,
 	.qc_prep		= nv_swncq_qc_prep,
 	.qc_issue		= nv_swncq_qc_issue,
 	.freeze			= nv_mcp55_freeze,

Torsten Kaiser

2007-10-13 18:05 UTC #27 lore raw

Quoted 10 lines · Jeff Garzik

Quoted 5 lines · Torsten Kaiser
3 boots, all worked. So I'm very sure that was the bug, but I will now do a little load testing...
The only strange thing about 2.6.23-mm1 is, that it takes ~4 second more to boot.
So, you basically applied the attached patch?
Yeah, absence of qc_defer for an NCQ-capable chip would do it.

Yes. The system seems to work correctly now.

The only thing I noted during load testing (updating Gentoo == compiling and installing) was, that there seems to be memory leak. After ~2h 2.5 of my 4Gb where gone. But there where to many things going on to pinpoint it... (NFSv4 over eth1394?)

Quoted 14 lines

drivers/ata/sata_nv.c +1 -0

index cf5c85e..240a892 100644
@@ -554,6 +554,7 @@ static const struct ata_port_operations nv_swncq_ops = {
        .bmdma_start            = ata_bmdma_start,
        .bmdma_stop             = ata_bmdma_stop,
        .bmdma_status           = ata_bmdma_status,
+       .qc_defer               = ata_std_qc_defer,
        .qc_prep                = nv_swncq_qc_prep,
        .qc_issue               = nv_swncq_qc_issue,
        .freeze                 = nv_mcp55_freeze,

Andrew Morton

author maintainer

2007-10-13 18:18 UTC #28 lore raw

Quoted 4 lines · On Sat, 13 Oct 2007 20:05:19 +0200 "Torsten Kaiser"…

The only thing I noted during load testing (updating Gentoo == compiling and installing) was, that there seems to be memory leak. After ~2h 2.5 of my 4Gb where gone. But there where to many things going on to pinpoint it... (NFSv4 over eth1394?)

Please send /proc/meminfo and /proc/slabinfo after the leak has been happening for a while.

Sometimes `echo m > /proc/sysrq_trigger ; dmesg -s 1000000' will provide useful info.

The page-owner code can pinpoint a leak source. See ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.23/2.6.23-mm1/broken-out/page-owner-tracking-leak-detector.patch

Enable CONFIG_DEBUG_SLAB_LEAK, check out /proc/slab_allocators

Torsten Kaiser

2007-10-13 18:35 UTC #29 lore raw

Quoted 7 lines · Andrew Morton

Quoted 4 lines · On Sat, 13 Oct 2007 20:05:19 +0200 "Torsten Kaiser"…
The only thing I noted during load testing (updating Gentoo == compiling and installing) was, that there seems to be memory leak. After ~2h 2.5 of my 4Gb where gone. But there where to many things going on to pinpoint it... (NFSv4 over eth1394?)

Quoted 5 lines

Please send /proc/meminfo and /proc/slabinfo after the leak has been happening for a while.
Sometimes `echo m > /proc/sysrq_trigger ; dmesg -s 1000000' will provide useful info.

I don't have the meminfo or slabinfo, only the output from SysRq+M:

SysRq : Show Memory
Mem-info:
Node 0 DMA per-cpu:
CPU 0: Hot: hi: 0, btch: 1 usd: 0 Cold: hi: 0, btch: 1 usd: 0
CPU 1: Hot: hi: 0, btch: 1 usd: 0 Cold: hi: 0, btch: 1 usd: 0
CPU 2: Hot: hi: 0, btch: 1 usd: 0 Cold: hi: 0, btch: 1 usd: 0
CPU 3: Hot: hi: 0, btch: 1 usd: 0 Cold: hi: 0, btch: 1 usd: 0
Node 0 DMA32 per-cpu:
CPU 0: Hot: hi: 186, btch: 31 usd: 173 Cold: hi: 62, btch: 15 usd: 29
CPU 1: Hot: hi: 186, btch: 31 usd: 69 Cold: hi: 62, btch: 15 usd: 4
CPU 2: Hot: hi: 186, btch: 31 usd: 82 Cold: hi: 62, btch: 15 usd: 13
CPU 3: Hot: hi: 186, btch: 31 usd: 71 Cold: hi: 62, btch: 15 usd: 3
Node 1 DMA32 per-cpu:
CPU 0: Hot: hi: 186, btch: 31 usd: 171 Cold: hi: 62, btch: 15 usd: 0
CPU 1: Hot: hi: 186, btch: 31 usd: 57 Cold: hi: 62, btch: 15 usd: 0
CPU 2: Hot: hi: 186, btch: 31 usd: 171 Cold: hi: 62, btch: 15 usd: 6
CPU 3: Hot: hi: 186, btch: 31 usd: 158 Cold: hi: 62, btch: 15 usd: 7
Node 1 Normal per-cpu:
CPU 0: Hot: hi: 186, btch: 31 usd: 0 Cold: hi: 62, btch: 15 usd: 0
CPU 1: Hot: hi: 186, btch: 31 usd: 0 Cold: hi: 62, btch: 15 usd: 0
CPU 2: Hot: hi: 186, btch: 31 usd: 170 Cold: hi: 62, btch: 15 usd: 13
CPU 3: Hot: hi: 186, btch: 31 usd: 172 Cold: hi: 62, btch: 15 usd: 19
Active:236368 inactive:63289 dirty:365 writeback:0 unstable:0
free:28366 slab:43372 mapped:13718 pagetables:2356 bounce:0
Node 0 DMA free:8048kB min:16kB low:20kB high:24kB active:0kB inactive:0kB present:8876kB pages_scanned:0 all_unreclaimable? no lowmem_reserve[]: 0 2004 2004 2004
Node 0 DMA32 free:98364kB min:4040kB low:5048kB high:6060kB active:527764kB inactive:107636kB present:2052320kB pages_scanned:0 all_unreclaimable? no
lowmem_reserve[]: 0 0 0 0
Node 1 DMA32 free:5824kB min:3040kB low:3800kB high:4560kB active:223216kB inactive:135068kB present:1544000kB pages_scanned:0 all_unreclaimable? no
lowmem_reserve[]: 0 0 505 505
Node 1 Normal free:1228kB min:1016kB low:1268kB high:1524kB active:194492kB inactive:10452kB present:517120kB pages_scanned:0 all_unreclaimable? no
lowmem_reserve[]: 0 0 0 0
Node 0 DMA: 6*4kB 7*8kB 4*16kB 5*32kB 3*64kB 3*128kB 4*256kB 2*512kB 1*1024kB 2*2048kB 0*4096kB = 8048kB
Node 0 DMA32: 10629*4kB 4229*8kB 1240*16kB 4*32kB 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 1*2048kB 0*4096kB = 98364kB
Node 1 DMA32: 442*4kB 5*8kB 3*16kB 2*32kB 1*64kB 0*128kB 1*256kB 1*512kB 1*1024kB 1*2048kB 0*4096kB = 5824kB
Node 1 Normal: 182*4kB 17*8kB 9*16kB 1*32kB 3*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 1232kB
Swap cache: add 64, delete 64, find 35/40, race 0+0
Free swap = 9775416kB
Total swap = 9775416kB
Free swap: 9775416kB
1048576 pages of RAM
35172 reserved pages
106120 pages shared
0 pages swap cached

When I noticed the leak, I stopped the emerge (the Gentoo update aka the compiling tasks) and cleared the tmpfs that was used for it. I also stopped X.
~1Gb was used as pagecache, slubinfo showed around 200..300 Mb used for slab, but only ~350Mb free out of 4Gb.
I did not see any tasks with abnormal memory sizes.

Quoted 5 lines

The page-owner code can pinpoint a leak source. See ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.23/2.6.23-mm1/broken-out/page-owner-tracking-leak-detector.patch
Enable CONFIG_DEBUG_SLAB_LEAK, check out /proc/slab_allocators

I suspected that I need more debugging options to track this. Currently compiling more packages again, but no obvious leak. When the leak occurred I noticed the disk throughput falling / stalling several second and this appeared in the syslog:
ohci1394: fw-host0: Waking dma ctx=0 ... processing is probably too slow
ohci1394: fw-host0: Waking dma ctx=0 ... processing is probably too slow

I'm still using the old firewire stack because of eth1394.

I will mail again, when I have more info.

Torsten

Torsten Kaiser

2007-10-14 11:54 UTC #30 lore raw

In reply to Andrew Morton

Quoted 5 lines · Andrew Morton

Please send /proc/meminfo and /proc/slabinfo after the leak has been happening for a while.
Sometimes `echo m > /proc/sysrq_trigger ; dmesg -s 1000000' will provide useful info.

As I'm using SLUB there is no /proc/slabinfo.

I have attached any files that looked remotely related. After I have seen ~2Gb leaked again, I took the first set of outputs. atop showed at that point:

MEM | tot    3.9G | free  648.7M | cache 814.5M | buff    0.0M | slab 131.5M |
SWP | tot    9.3G | free    9.3G |              | vmcom  16.7M | vmlim 11.3G |

free showed:
total used free shared buffers cached
Mem: 4061808 3396852 664956 0 28 834012
-/+ buffers/cache: 2562812 1498996
Swap: 9775416 60 9775356

I then tried to build 2.6.23-mm1 with PAGE_OWNER enabled. During modpost the system started swapping like mad, I needed to abort the build, but was still able to shut down the system normal. At that point I took the secound set of outputs (files called *.end) free showed at that time:
total used free shared buffers cached

Mem:       4061808    3777084     284724          0          0       2032
-/+ buffers/cache:    3775052     286756

Swap: 9775416 4904 9770512

The slubinfo-files are the output of Documentation/vm/slabinfo.c

Quoted 4 lines

The page-owner code can pinpoint a leak source. See ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.23/2.6.23-mm1/broken-out/page-owner-tracking-leak-detector.patch
Enable CONFIG_DEBUG_SLAB_LEAK, check out /proc/slab_allocators

Did that. The output of /proc/page_owner is ~350Mb, gzipped still ~7Mb.

Taking only the first line from each stackdump it shows the following counts:

     73 [0xffffffff8020a13e] __switch_to+430
      6 [0xffffffff8020a236] __switch_to+678
      8 [0xffffffff8020ac30] default_idle+0
      1 [0xffffffff8020ba3f] sys_rt_sigreturn+879
      3 [0xffffffff8020bbbe] system_call+126
    115 [0xffffffff802132e1] dma_alloc_pages+177
      1 [0xffffffff802191fb] __smp_call_function_mask+235
      1 [0xffffffff8021970b] flush_tlb_page+75
      8 [0xffffffff8021c1b7] mp_register_gsi+71
      3 [0xffffffff8021c25b] mp_register_gsi+235
     26 [0xffffffff8021ec6d] flush_gart+13
      2 [0xffffffff8021ec7f] flush_gart+31
     28 [0xffffffff8021ecda] gart_map_simple+58
      1 [0xffffffff8021f048] gart_map_sg+680
     15 [0xffffffff8021f2af] k8_flush_garts+191
      4 [0xffffffff8022078b] do_page_fault+683
      1 [0xffffffff80220cc8] ioremap_change_attr+88
      1 [0xffffffff80220db1] __ioremap+225
      2 [0xffffffff8022123d] __change_page_attr+525
      1 [0xffffffff80222d2e] twofish_dec_blk+1557
     20 [0xffffffff80227e15] load_elf32_binary+181
    123 [0xffffffff8022c223] enqueue_task+19
      2 [0xffffffff8022c2a2] activate_task+50
     31 [0xffffffff8022c3f4] source_load+52
     54 [0xffffffff8022c464] target_load+52
     25 [0xffffffff8022c5b6] move_tasks+118
      4 [0xffffffff8022c684] __wake_up_common+20
     23 [0xffffffff8022c6ca] __wake_up_common+90
     38 [0xffffffff8022cb31] update_curr+97
      5 [0xffffffff8022cb78] update_curr+168
      1 [0xffffffff8022cd35] balance_tasks+117
     12 [0xffffffff8022cde3] balance_tasks+291
      2 [0xffffffff8022cee8] load_balance_fair+88
      3 [0xffffffff8022cff0] load_balance_next_fair+0
    137 [0xffffffff8022d04d] __dequeue_entity+61
      4 [0xffffffff8022d083] set_next_entity+35
   1101 [0xffffffff8022d0f5] pick_next_task_fair+69
    319 [0xffffffff8022d3e3] __wake_up+67
      6 [0xffffffff8022d4bc] task_rq_lock+76
     17 [0xffffffff8022d693] try_to_wake_up+99
    211 [0xffffffff8022d910] default_wake_function+0
    575 [0xffffffff8022df58] find_busiest_group+472
      1 [0xffffffff80230844] finish_task_switch+164
    217 [0xffffffff802318f4] enqueue_task_fair+132
    335 [0xffffffff80231981] dequeue_task_fair+81
      8 [0xffffffff80231ca4] check_preempt_wakeup+212
      6 [0xffffffff80231cba] check_preempt_wakeup+234
      2 [0xffffffff8023252c] dup_fd+44
     31 [0xffffffff8023273b] dup_fd+571
      1 [0xffffffff80233393] copy_process+1811
      1 [0xffffffff8023549e] release_console_sem+494
      5 [0xffffffff80235b0e] printk+78
      1 [0xffffffff80237dd6] do_wait+1558
      1 [0xffffffff8023a2a6] on_each_cpu+38
      5 [0xffffffff8023e844] lock_timer_base+52
      1 [0xffffffff8023e8d2] try_to_del_timer_sync+82
      5 [0xffffffff8023e8f0] del_timer_sync+16
     10 [0xffffffff8023ea12] __mod_timer+194
     65 [0xffffffff8023ec4d] mod_timer+29
      1 [0xffffffff8023ecee] del_timer+110
      2 [0xffffffff8023ff98] __dequeue_signal+344
      1 [0xffffffff8024003e] signal_wake_up+30
      3 [0xffffffff80242090] sys_rt_sigprocmask+128
      2 [0xffffffff802457f9] call_usermodehelper_exec+153
    525 [0xffffffff802462c0] __queue_work+48
     28 [0xffffffff80246347] queue_work+55
      4 [0xffffffff802467b0] worker_thread+0
      1 [0xffffffff80246845] worker_thread+149
    132 [0xffffffff80247e99] __kernel_text_address+9
    151 [0xffffffff80247eaa] __kernel_text_address+26
     62 [0xffffffff8024a2c0] bit_waitqueue+16
     23 [0xffffffff8024a398] __wake_up_bit+40
     24 [0xffffffff8024a3b8] wake_up_bit+24
    254 [0xffffffff8024a3e0] autoremove_wake_function+0
    106 [0xffffffff8024a3e9] autoremove_wake_function+9
      1 [0xffffffff8024a6b9] remove_wait_queue+41
      2 [0xffffffff8024f245] sysctl_check_lookup+197
      4 [0xffffffff8024f554] sysctl_check_table+756
      1 [0xffffffff8024f5bc] sysctl_check_table+860
      1 [0xffffffff80254603] get_futex_key+83
     21 [0xffffffff8025595c] futex_wake+204
      6 [0xffffffff80257eeb] __module_text_address+91
   1221 [0xffffffff80263734] file_read_actor+324
     89 [0xffffffff80263821] find_get_page+33
      1 [0xffffffff80263850] find_get_page+80
   2009 [0xffffffff802638bf] __lock_page+95
     57 [0xffffffff802638e0] sync_page+0
      1 [0xffffffff80263a92] find_lock_page+2
    206 [0xffffffff80263ab9] find_lock_page+41
      1 [0xffffffff80263b03] find_lock_page+115
  13762 [0xffffffff80263cda] add_to_page_cache+186
  33836 [0xffffffff80263d93] __grab_cache_page+99
      4 [0xffffffff802640f9] do_generic_mapping_read+489
   7431 [0xffffffff802641b2] do_generic_mapping_read+674
      1 [0xffffffff8026421d] do_generic_mapping_read+781
    678 [0xffffffff802643a6] find_or_create_page+54
  12884 [0xffffffff802643b6] find_or_create_page+70
      1 [0xffffffff80265bbe] generic_file_aio_read+254
    122 [0xffffffff80265e13] filemap_fault+419
    227 [0xffffffff80266240] mempool_free_slab+0
 354042 [0xffffffff80266373] mempool_alloc+83
    113 [0xffffffff802689e8] __rmqueue_smallest+216
     76 [0xffffffff80268a39] __rmqueue_smallest+297
      3 [0xffffffff80269043] free_pages_bulk+611
      6 [0xffffffff80269253] __pagevec_free+35
    249 [0xffffffff802693fe] __get_free_pages+14
   2002 [0xffffffff80269457] get_zeroed_page+23
    221 [0xffffffff802694bf] __rmqueue+47
      1 [0xffffffff802695dc] __rmqueue+332
     40 [0xffffffff8026977e] rmqueue_bulk+110
     41 [0xffffffff80269b30] get_page_from_freelist+896
   7323 [0xffffffff80269b3b] get_page_from_freelist+907
      2 [0xffffffff80269d13] get_page_from_freelist+1379
     11 [0xffffffff80269d26] get_page_from_freelist+1398
      6 [0xffffffff80269eb2] __alloc_pages+2
      1 [0xffffffff80269eba] __alloc_pages+10
      1 [0xffffffff80269ec2] __alloc_pages+18
      1 [0xffffffff8026a0fe] __alloc_pages+590
     24 [0xffffffff8026a205] __alloc_pages+853
 105887 [0xffffffff8026c246] __do_page_cache_readahead+230
     15 [0xffffffff8026ca6f] release_pages+367
      6 [0xffffffff8026cb84] __pagevec_lru_add_active+212
    638 [0xffffffff8026cc79] __pagevec_lru_add+201
      1 [0xffffffff8026ccf4] activate_page+100
    165 [0xffffffff8026cd3f] activate_page+175
      2 [0xffffffff8026d07b] mark_page_accessed+43
     78 [0xffffffff8026d1d7] pagevec_lookup+23
     79 [0xffffffff8026d9a8] truncate_inode_pages_range+392
    128 [0xffffffff80270f62] zone_statistics+66
   2426 [0xffffffff80270f9d] zone_statistics+125
    236 [0xffffffff80272c60] __do_fault+480
      1 [0xffffffff80272c85] __do_fault+517
   5233 [0xffffffff80272cb8] __do_fault+568
     32 [0xffffffff80272d62] __do_fault+738
   4744 [0xffffffff80273233] do_wp_page+211
     97 [0xffffffff80273cd5] unmap_vmas+933
      1 [0xffffffff802743dc] unmap_mapping_range+140
     43 [0xffffffff80274978] handle_mm_fault+456
 103412 [0xffffffff80274ae4] handle_mm_fault+820
      4 [0xffffffff80274baa] handle_mm_fault+1018
     15 [0xffffffff80274d81] handle_mm_fault+1489
      2 [0xffffffff80277f6a] unmap_region+250
      5 [0xffffffff802783b4] find_extend_vma+36
      1 [0xffffffff8027886e] vma_adjust+606
      4 [0xffffffff80278ef6] do_munmap+662
    732 [0xffffffff80279292] vma_link+130
      1 [0xffffffff80279c8e] mmap_region+750
    343 [0xffffffff8027cb45] page_dup_rmap+21
   3613 [0xffffffff8027db83] __vmalloc_area_node+371
   4096 [0xffffffff8027dbc8] __vmalloc_area_node+440
      1 [0xffffffff80283348] zonelist_policy+8
      8 [0xffffffff8028339a] zonelist_policy+90
      1 [0xffffffff802833a2] zonelist_policy+98
      3 [0xffffffff802833c3] zonelist_policy+131
      1 [0xffffffff802833e3] zonelist_policy+163
     12 [0xffffffff802833ef] zonelist_policy+175
      1 [0xffffffff802833f8] zonelist_policy+184
   1040 [0xffffffff80284256] alloc_page_interleave+86
      9 [0xffffffff802842cd] alloc_page_interleave+205
      4 [0xffffffff80285411] alloc_pages_current+1
      2 [0xffffffff80285423] alloc_pages_current+19
     19 [0xffffffff8028542a] alloc_pages_current+26
     13 [0xffffffff8028542d] alloc_pages_current+29
      3 [0xffffffff80285452] alloc_pages_current+66
      4 [0xffffffff8028545b] alloc_pages_current+75
      2 [0xffffffff8028545f] alloc_pages_current+79
      1 [0xffffffff80285464] alloc_pages_current+84
  10948 [0xffffffff80287c7a] shmem_getpage+394
     37 [0xffffffff80287d30] shmem_getpage+576
     51 [0xffffffff8028a66b] add_partial+43
     26 [0xffffffff8028bddc] new_slab+172
     26 [0xffffffff8028befa] new_slab+458
  41349 [0xffffffff8028bf67] new_slab+567
     62 [0xffffffff8028c008] get_partial_node+104
   1332 [0xffffffff8028c217] __slab_free+487
    157 [0xffffffff8028c4f9] __slab_alloc+441
     34 [0xffffffff8028c561] __slab_alloc+545
      2 [0xffffffff8028c67f] __slab_alloc+831
    341 [0xffffffff8028c697] __slab_alloc+855
      4 [0xffffffff8028cbfb] kmem_cache_alloc+155
      1 [0xffffffff8028dfbe] sysfs_slab_alias+46
      1 [0xffffffff802905d4] filp_close+84
     19 [0xffffffff80290687] get_unused_fd_flags+119
      1 [0xffffffff80291ae0] vfs_statfs_native+64
      1 [0xffffffff80292449] do_sync_write+217
      2 [0xffffffff802958c0] chrdev_open+0
      2 [0xffffffff802961e7] sys_newlstat+39
     15 [0xffffffff802961f6] sys_newlstat+54
      1 [0xffffffff80296387] sys_newstat+39
     71 [0xffffffff80296396] sys_newstat+54
      2 [0xffffffff80298f70] pipe_ioctl+128
     11 [0xffffffff802998e6] pipe_write+742
     23 [0xffffffff80299e5f] pipe_read+687
   1225 [0xffffffff80299eae] pipe_read+766
     10 [0xffffffff8029a3f3] generic_permission+99
      3 [0xffffffff8029a869] __follow_mount+41
   8501 [0xffffffff8029aabf] do_lookup+143
     42 [0xffffffff8029c325] deny_write_access+21
     12 [0xffffffff8029c3bb] lookup_one_len+91
     10 [0xffffffff8029c5d6] __link_path_walk+134
      5 [0xffffffff8029c829] __link_path_walk+729
    508 [0xffffffff8029d056] __link_path_walk+2822
      3 [0xffffffff8029d269] __link_path_walk+3353
    486 [0xffffffff8029d460] link_path_walk+128
     29 [0xffffffff8029d739] do_path_lookup+137
     15 [0xffffffff8029ff94] do_ioctl+132
      7 [0xffffffff802a08e1] free_poll_entry+17
      1 [0xffffffff802a0c68] do_sys_poll+744
      1 [0xffffffff802a14f2] core_sys_select+562
     10 [0xffffffff802a1870] __pollwait+0
     77 [0xffffffff802a4b21] d_rehash+33
     48 [0xffffffff802a4db5] d_kill+53
     23 [0xffffffff802a588f] __d_lookup+175
      1 [0xffffffff802a5908] __d_lookup+296
    472 [0xffffffff802a5ef6] dput+38
      8 [0xffffffff802a725f] __iget+79
      1 [0xffffffff802a796e] alloc_inode+318
      2 [0xffffffff802a7ed4] iget_locked+68
      1 [0xffffffff802a863c] new_inode+92
      4 [0xffffffff802a88af] touch_atime+31
      3 [0xffffffff802a8978] touch_atime+232
      1 [0xffffffff802a8e52] notify_change+466
     29 [0xffffffff802aa80f] mntput_no_expire+31
     76 [0xffffffff802ac485] mnt_drop_write+37
      2 [0xffffffff802ac8cd] mnt_want_write+45
      7 [0xffffffff802afd0d] seq_open+77
      1 [0xffffffff802b33b5] __mark_inode_dirty+101
  68796 [0xffffffff802b7d7b] __set_page_dirty+219
      1 [0xffffffff802b7e00] mark_buffer_dirty+32
      1 [0xffffffff802b7edc] __block_commit_write+92
      1 [0xffffffff802b7f08] __block_commit_write+136
      1 [0xffffffff802b7f10] __block_commit_write+144
    311 [0xffffffff802b7f15] __block_commit_write+149
      1 [0xffffffff802b8346] unmap_underlying_metadata+6
      3 [0xffffffff802ba04e] generic_write_end+94
      2 [0xffffffff802bc347] check_disk_change+39
      5 [0xffffffff802bffb0] mpage_end_io_read+0
      3 [0xffffffff802d6ed2] proc_alloc_inode+18
      1 [0xffffffff802d6f40] pde_users_dec+16
      1 [0xffffffff802d7860] proc_reg_open+0
      1 [0xffffffff802d94fd] proc_flush_task_mnt+285
    132 [0xffffffff802d9b10] proc_fd_instantiate+0
      3 [0xffffffff802db798] create_proc_entry+88
      1 [0xffffffff802dc1a7] proc_lookup+247
      1 [0xffffffff802de5a8] show_stat+1064
      1 [0xffffffff802e289a] sysfs_add_file+106
      8 [0xffffffff802e2c30] sysfs_ilookup_test+0
      2 [0xffffffff802e2ed9] sysfs_find_dirent+41
      1 [0xffffffff802e327d] sysfs_addrm_finish+29
      1 [0xffffffff802e3641] sysfs_create_dir+49
    272 [0xffffffff802e8cc3] nfs_lookup_revalidate+579
      1 [0xffffffff802e9d41] nfs_do_access+241
   1615 [0xffffffff802ea2f0] nfs_readdir_filler+0
      1 [0xffffffff802f9ded] _nfs4_proc_lookupfh+125
     14 [0xffffffff802ff415] decode_op_hdr+21
      1 [0xffffffff8032190d] xfs_alloc_vextent+637
      1 [0xffffffff80321c15] xfs_alloc_log_block+69
      5 [0xffffffff80325622] xfs_attr_leaf_get+98
     28 [0xffffffff8032575b] xfs_attr_fetch+235
      8 [0xffffffff8032bec1] xfs_bmap_last_offset+273
      1 [0xffffffff8032c5a5] xfs_bmap_search_multi_extents+117
      8 [0xffffffff8032c5c6] xfs_bmap_search_multi_extents+150
     92 [0xffffffff8032c5df] xfs_bmap_search_multi_extents+175
    569 [0xffffffff8032c6bd] xfs_bmap_search_extents+109
      5 [0xffffffff8033358c] xfs_bmapi+540
      1 [0xffffffff80333a54] xfs_bmapi+1764
      1 [0xffffffff803393b5] xfs_btree_init_cursor+69
     49 [0xffffffff8033a084] xfs_buf_item_init+100
      1 [0xffffffff8033ab3f] xfs_da_brelse+111
   5066 [0xffffffff8033ad57] xfs_da_buf_make+231
      7 [0xffffffff8033ba64] xfs_da_do_buf+1444
      5 [0xffffffff8033e76b] xfs_dir_lookup+299
     12 [0xffffffff8033e79f] xfs_dir_lookup+351
      4 [0xffffffff8033eb9b] xfs_dir_createname+379
      2 [0xffffffff8033ec37] xfs_dir_init+103
      1 [0xffffffff8033ee1a] xfs_dir2_block_lookup_int+90
      1 [0xffffffff8033eeb9] xfs_dir2_block_lookup_int+249
      1 [0xffffffff803416d4] xfs_dir2_leaf_lookup_int+516
      1 [0xffffffff80343234] xfs_dir2_leafn_order+4
     63 [0xffffffff8034e2bc] xfs_iunlock+92
     24 [0xffffffff8034e31c] xfs_iunlock+188
      1 [0xffffffff8034ed57] xfs_iget_core+1063
    511 [0xffffffff8034f96b] xfs_iext_bno_to_ext+155
      5 [0xffffffff80350869] xfs_iext_add+361
     11 [0xffffffff803512cd] xfs_itobp+381
      5 [0xffffffff80351657] xfs_itruncate_finish+679
    810 [0xffffffff80351a22] xfs_iformat_local+258
    886 [0xffffffff803528d1] xfs_iformat_extents+177
      1 [0xffffffff803529c7] xfs_iformat_extents+423
      1 [0xffffffff80354a7e] xfs_inode_item_init+30
   2924 [0xffffffff803555b6] xfs_iomap+406
      3 [0xffffffff80355e55] xfs_iomap_write_delay+389
    140 [0xffffffff8035a4d6] xlog_state_release_iclog+38
    195 [0xffffffff8035a59b] xlog_state_get_iclog_space+59
      4 [0xffffffff8035aac8] xlog_write+920
    248 [0xffffffff8035aea0] xfs_log_release_iclog+16
      1 [0xffffffff803620a9] xfs_icsb_sync_counters_flags+121
      4 [0xffffffff80362931] xfs_icsb_modify_counters+113
      1 [0xffffffff80362b01] xfs_mod_incore_sb_batch+161
      3 [0xffffffff8036600f] xfs_trans_unreserve_and_mod_sb+207
     10 [0xffffffff80366967] _xfs_trans_commit+823
      2 [0xffffffff80366bbb] xfs_trans_unlocked_item+59
   1016 [0xffffffff80367654] xfs_trans_read_buf+100
      1 [0xffffffff80367657] xfs_trans_read_buf+103
     12 [0xffffffff80367786] xfs_trans_read_buf+406
      1 [0xffffffff80367c4d] xfs_trans_ijoin+61
      5 [0xffffffff80367e94] xfs_trans_unlock_chunk+132
      1 [0xffffffff8036b284] xfs_statvfs+292
      2 [0xffffffff80370db3] xfs_release+339
   1143 [0xffffffff80371592] xfs_readlink+130
    366 [0xffffffff80371f6c] kmem_zone_alloc+92
    128 [0xffffffff803720bd] kmem_alloc+93
   1812 [0xffffffff80374156] xfs_buf_iowait+70
      1 [0xffffffff80374a0e] xfs_buf_rele+46
      1 [0xffffffff80374cbe] xfs_buf_delwri_queue+94
   4252 [0xffffffff803751fd] _xfs_buf_lookup_pages+637
     31 [0xffffffff80376170] _xfs_buf_find+256
    666 [0xffffffff80376357] xfs_buf_get_flags+183
    118 [0xffffffff80376442] xfs_buf_read_flags+18
      2 [0xffffffff80376495] xfs_buf_read_flags+101
    278 [0xffffffff803790d5] xfs_vn_permission+21
     24 [0xffffffff80379872] xfs_vn_lookup+66
     21 [0xffffffff8037a9c5] xfs_read+405
     14 [0xffffffff80386c60] dummy_inode_alloc_security+0
      1 [0xffffffff80386d10] dummy_inode_readlink+0
     36 [0xffffffff80386d30] dummy_inode_permission+0
      1 [0xffffffff80388e60] cap_capable+0
      1 [0xffffffff80388e6f] cap_capable+15
      1 [0xffffffff80388fca] cap_syslog+42
     32 [0xffffffff8038e045] crypto_cbc_init_tfm+69
     49 [0xffffffff8039b14d] blk_recount_segments+61
      5 [0xffffffff8039c230] generic_make_request+464
      2 [0xffffffff8039c486] submit_bio+102
     23 [0xffffffff8039f108] generic_unplug_device+24
      2 [0xffffffff803a16ec] exact_lock+12
      1 [0xffffffff803a3e70] cfq_queue_empty+0
      5 [0xffffffff803a8908] _atomic_dec_and_lock+72
      5 [0xffffffff803a8f85] ida_get_new_above+165
     63 [0xffffffff803a90f9] idr_get_new_above_int+73
      1 [0xffffffff803a911b] idr_get_new+11
      1 [0xffffffff803a9a50] kobject_release+0
      2 [0xffffffff803a9ac2] kobject_get+18
      7 [0xffffffff803aa006] kobject_set_name+278
      2 [0xffffffff803aa73a] kobject_uevent_env+298
      2 [0xffffffff803ab2e3] prio_tree_insert+35
      5 [0xffffffff803ab33c] prio_tree_insert+124
      4 [0xffffffff803ab4be] prio_tree_insert+510
     18 [0xffffffff803abeb2] radix_tree_node_alloc+50
      1 [0xffffffff803ac6fa] radix_tree_delete+426
     14 [0xffffffff803ac94d] rb_insert_color+141
     14 [0xffffffff803ac99e] rb_insert_color+222
   2699 [0xffffffff803ad047] __up_read+39
      4 [0xffffffff803ad0e7] __up_write+39
     10 [0xffffffff803ae2ea] number+682
     20 [0xffffffff803aee3b] vsnprintf+811
      3 [0xffffffff803aee7b] vsnprintf+875
      4 [0xffffffff803af241] sprintf+81
      1 [0xffffffff803af304] snprintf+68
      1 [0xffffffff803af535] clear_page_c+5
      4 [0xffffffff803af537] clear_page_c+7
     11 [0xffffffff803c8218] vgacon_init+200
      1 [0xffffffff803c8981] vgacon_scroll+289
      3 [0xffffffff803c8e80] vgacon_cursor+0
      2 [0xffffffff803c9450] acpi_os_release_object+9
      1 [0xffffffff803ce3b5] acpi_ev_address_space_dispatch+360
      1 [0xffffffff803d26ba] acpi_ex_field_datum_io+231
      2 [0xffffffff803d282e] acpi_ex_extract_from_field+224
     11 [0xffffffff803d7412] acpi_ns_lookup+578
      1 [0xffffffff803d7858] acpi_ns_search_one_scope+28
     10 [0xffffffff803d7944] acpi_ns_search_and_enter+196
      1 [0xffffffff803ddddd] acpi_ut_evaluate_object+390
      1 [0xffffffff803de372] acpi_ut_valid_acpi_name+39
      1 [0xffffffff803df43c] acpi_ut_update_ref_count+82
      2 [0xffffffff803df564] acpi_ut_update_object_reference+219
      1 [0xffffffff803dfbcd] acpi_ut_allocate_object_desc_dbg+52
      1 [0xffffffff803dfe89] acpi_ut_create_generic_state+65
      1 [0xffffffff803e4250] acpi_pci_link_get_current+116
     28 [0xffffffff803f14c8] secure_ip_id+72
      2 [0xffffffff803f20e1] tty_ldisc_deref+81
      1 [0xffffffff803f30c3] init_dev+675
      1 [0xffffffff803f312d] init_dev+781
      1 [0xffffffff8040e6db] uart_console_write+43
      1 [0xffffffff8041224c] serial8250_start_tx+124
      1 [0xffffffff80431560] scsi_done+0
      1 [0xffffffff804352d6] scsi_error_handler+102
      1 [0xffffffff80439041] scsi_target_reap+49
      5 [0xffffffff80440cb3] ata_dev_init+83
      6 [0xffffffff804424f8] ata_qc_issue+312
      1 [0xffffffff80449376] ata_scsi_qc_complete+246
      2 [0xffffffff8044c79f] ata_exec_command+31
     22 [0xffffffff8044cc6c] ata_tf_load+236
      1 [0xffffffff80466b87] dma_trm_flush+359
      1 [0xffffffff8046a445] ether1394_data_handler+661
      1 [0xffffffff8047388b] usb_start_wait_urb+139
      1 [0xffffffff80473b4f] usb_control_msg+239
    669 [0xffffffff804b5c66] __release_stripe+198
     96 [0xffffffff804b7f49] grow_one_stripe+153
      5 [0xffffffff804c115d] md_import_device+125
      1 [0xffffffff804c18e4] mddev_find+372
     12 [0xffffffff804c9103] read_sb_page+35
    191 [0xffffffff804cb74d] __map_bio+61
    135 [0xffffffff804cc4ba] __split_bio+906
     13 [0xffffffff804cc8ad] dm_request+269
     44 [0xffffffff804ce33e] dm_table_any_congested+46
     23 [0xffffffff804d2589] crypt_map+105
      1 [0xffffffff804ddf85] snd_card_file_remove+101
      1 [0xffffffff804f6f4d] snd_hda_codec_write+109
      8 [0xffffffff8050ab1c] pci_conf1_read+204
     12 [0xffffffff8050d8e1] sockfd_lookup_light+65
     35 [0xffffffff8050e1bb] sock_sendmsg+203
     14 [0xffffffff8051044f] sk_reset_timer+15
    203 [0xffffffff80513f82] skb_dequeue+82
      1 [0xffffffff80515006] __alloc_skb+150
     18 [0xffffffff8051687d] memcpy_toiovec+77
      3 [0xffffffff805168cf] verify_iovec+47
      2 [0xffffffff80519630] dev_seq_open+96
      2 [0xffffffff8051cd1d] netdev_run_todo+333
      3 [0xffffffff8051d2fa] dev_queue_xmit+170
      1 [0xffffffff8052a2e8] __qdisc_run+152
      1 [0xffffffff8053c39f] ip_output+447
      5 [0xffffffff80543710] tcp_sendmsg+1904
      1 [0xffffffff80580318] unix_release_sock+408
      1 [0xffffffff805813e3] unix_stream_sendmsg+483
      2 [0xffffffff8058e069] xprt_end_transmit+57
      2 [0xffffffff80593207] rpc_wake_up_task+103
     17 [0xffffffff80593993] rpc_wake_up_next+147
      2 [0xffffffff805ac844] wait_for_common+292
     57 [0xffffffff805acb3f] __switch_to_end+24
     12 [0xffffffff805aced9] __switch_to_end+946
  11861 [0xffffffff805ad128] io_schedule+40
      8 [0xffffffff805ad235] schedule_timeout+149
      9 [0xffffffff805ad2d4] __wait_on_bit_lock+36
      2 [0xffffffff805ad315] __wait_on_bit_lock+101
     15 [0xffffffff805ad43b] __wait_on_bit+107
  46337 [0xffffffff805ae2c2] __down_read+18
    206 [0xffffffff805ae388] __down_failed+53
     17 [0xffffffff805ae725] __down+229
      2 [0xffffffff805ae8ec] _read_lock_irq+12
     25 [0xffffffff805aeaed] error_exit+0
      1 [0xffffffff807c2000] _sinittext+0
      1 [0xffffffff88047000] __videobuf_mmap_free+0
      1 [0xffffffff88096000] tda9855_volume+0
      1 [0xffffffff880bb000] w83792d_detach_client+0
      1 [0xffffffff880da570] ndisc_ifinfo_sysctl_change+0
      1 [0xffffffff8810e000] nfsd_vers+0
      1 [0xffffffff8814fa1a] drm_addmap_core+1098
      2 [0xffffffff88157650] drm_sg_alloc_ioctl+0

Torsten

Node 0, zone      DMA     10     10      5      8      4      4      6      3      3      1      0 
Node 0, zone    DMA32   6808   8403   9564   4697   1296    100     24      7      0      1      0 
Node 1, zone    DMA32   4441   1388    618    167     72     26     12     10      4      3      2 
Node 1, zone   Normal    824    472    333    225    112     26     14     12     11      6      2 
Node 0, zone      DMA      6      7      4      6      4      2      4      2      1      2      0 
Node 0, zone    DMA32  66334     23      8      1      0      0      0      0      0      1      0 
Node 1, zone    DMA32    417      4      2      3      1      2      0      1      1      1      0 
Node 1, zone   Normal    120     30      6      5      3      0      0      0      0      0      0 
MemTotal:      4061808 kB
MemFree:        664880 kB
Buffers:            28 kB
Cached:         833996 kB
SwapCached:         28 kB
Active:         241576 kB
Inactive:       601436 kB
SwapTotal:     9775416 kB
SwapFree:      9775356 kB
Dirty:               4 kB
Writeback:           0 kB
AnonPages:        8996 kB
Mapped:           4776 kB
Slab:           134612 kB
SReclaimable:   100168 kB
SUnreclaim:      34444 kB
PageTables:       1272 kB
NFS_Unstable:        0 kB
Bounce:              0 kB
CommitLimit:  11806320 kB
Committed_AS:    16580 kB
VmallocTotal: 34359738367 kB
VmallocUsed:     26672 kB
VmallocChunk: 34359710643 kB
HugePages_Total:     0
HugePages_Free:      0
HugePages_Rsvd:      0
HugePages_Surp:      0
Hugepagesize:     2048 kB
MemTotal:      4061808 kB
MemFree:        285032 kB
Buffers:             0 kB
Cached:           2156 kB
SwapCached:        408 kB
Active:            100 kB
Inactive:         2072 kB
SwapTotal:     9775416 kB
SwapFree:      9770508 kB
Dirty:               0 kB
Writeback:           0 kB
AnonPages:           0 kB
Mapped:            396 kB
Slab:             7884 kB
SReclaimable:     1084 kB
SUnreclaim:       6800 kB
PageTables:        588 kB
NFS_Unstable:        0 kB
Bounce:              0 kB
CommitLimit:  11806320 kB
Committed_AS:     8536 kB
VmallocTotal: 34359738367 kB
VmallocUsed:     26672 kB
VmallocChunk: 34359710643 kB
HugePages_Total:     0
HugePages_Free:      0
HugePages_Rsvd:      0
HugePages_Surp:      0
Hugepagesize:     2048 kB
Page block order: 9
Pages per block:  512

Free pages count per migrate type at order       0      1      2      3      4      5      6      7      8      9     10 
Node    0, zone      DMA, type    Unmovable      3      2      0      2      0      1      1      1      1      0      0 
Node    0, zone      DMA, type  Reclaimable      1      1      1      1      1      1      1      1      1      0      0 
Node    0, zone      DMA, type      Movable      6      7      4      5      3      2      4      1      1      0      0 
Node    0, zone      DMA, type      Reserve      0      0      0      0      0      0      0      0      0      1      0 
Node    0, zone      DMA, type       <NULL>      0      0      0      0      0      0      0      0      0      0      0 
Node    0, zone    DMA32, type    Unmovable    326     66     43     40     32      7      1      0      0      0      0 
Node    0, zone    DMA32, type  Reclaimable     32     22      5      3      2      0      0      0      0      0      0 
Node    0, zone    DMA32, type      Movable   6423   8296   9508   4653   1262     93     23      7      0      0      0 
Node    0, zone    DMA32, type      Reserve     27     19      8      1      0      0      0      0      0      1      0 
Node    0, zone    DMA32, type       <NULL>      0      0      0      0      0      0      0      0      0      0      0

Number of blocks type Unmovable Reclaimable Movable Reserve <NULL>

Node 0, zone      DMA            1            1            5            1            0 
Node 0, zone    DMA32          453           28          533            2            0 
Page block order: 9
Pages per block:  512

Free pages count per migrate type at order       0      1      2      3      4      5      6      7      8      9     10 
Node    1, zone    DMA32, type    Unmovable   1503    431    229     71     30     12      2      1      1      0      0 
Node    1, zone    DMA32, type  Reclaimable     56     23     12      2      1      0      0      0      0      0      0 
Node    1, zone    DMA32, type      Movable   2882    934    377     94     41     14     10      9      3      3      1 
Node    1, zone    DMA32, type      Reserve      0      0      0      0      0      0      0      0      0      0      1 
Node    1, zone    DMA32, type       <NULL>      0      0      0      0      0      0      0      0      0      0      0 
Node    1, zone   Normal, type    Unmovable      1      1     21      8      9      4      0      0      0      0      0 
Node    1, zone   Normal, type  Reclaimable      0      0      1      8      7      2      1      0      0      0      0 
Node    1, zone   Normal, type      Movable    834    460    303    202     93     20     13     12     11      6      2 
Node    1, zone   Normal, type      Reserve     19     10      5      5      3      0      0      0      0      0      0 
Node    1, zone   Normal, type       <NULL>      0      0      0      0      0      0      0      0      0      0      0

Number of blocks type Unmovable Reclaimable Movable Reserve <NULL>

Node 1, zone    DMA32          439            6          321            2            0 
Node 1, zone   Normal           73            5          177            1            0 
Page block order: 9
Pages per block:  512

Free pages count per migrate type at order       0      1      2      3      4      5      6      7      8      9     10 
Node    0, zone      DMA, type    Unmovable      0      0      0      1      1      0      0      1      0      0      0 
Node    0, zone      DMA, type  Reclaimable      0      0      0      0      0      0      0      0      0      1      0 
Node    0, zone      DMA, type      Movable      6      7      4      5      3      2      4      1      1      0      0 
Node    0, zone      DMA, type      Reserve      0      0      0      0      0      0      0      0      0      1      0 
Node    0, zone      DMA, type       <NULL>      0      0      0      0      0      0      0      0      0      0      0 
Node    0, zone    DMA32, type    Unmovable      3      0      0      0      0      0      0      0      0      0      0 
Node    0, zone    DMA32, type  Reclaimable      0      0      0      0      0      0      0      0      0      0      0 
Node    0, zone    DMA32, type      Movable  66649      4      0      0      0      0      0      0      0      0      0 
Node    0, zone    DMA32, type      Reserve     27     19      8      1      0      0      0      0      0      1      0 
Node    0, zone    DMA32, type       <NULL>      0      0      0      0      0      0      0      0      0      0      0

Number of blocks type Unmovable Reclaimable Movable Reserve <NULL>

Node 0, zone      DMA            1            1            5            1            0 
Node 0, zone    DMA32          485           22          507            2            0 
Page block order: 9
Pages per block:  512

Free pages count per migrate type at order       0      1      2      3      4      5      6      7      8      9     10 
Node    1, zone    DMA32, type    Unmovable      0      0      0      0      0      0      0      0      0      0      0 
Node    1, zone    DMA32, type  Reclaimable      2      0      0      0      0      0      0      0      0      0      0 
Node    1, zone    DMA32, type      Movable    445      0      0      0      0      0      0      0      0      0      0 
Node    1, zone    DMA32, type      Reserve      1      4      2      3      1      2      0      1      1      1      0 
Node    1, zone    DMA32, type       <NULL>      0      0      0      0      0      0      0      0      0      0      0 
Node    1, zone   Normal, type    Unmovable     68     18      1      0      0      0      0      0      0      0      0 
Node    1, zone   Normal, type  Reclaimable     15      1      0      0      0      0      0      0      0      0      0 
Node    1, zone   Normal, type      Movable     16      5      0      0      0      0      0      0      0      0      0 
Node    1, zone   Normal, type      Reserve     19     10      5      5      3      0      0      0      0      0      0 
Node    1, zone   Normal, type       <NULL>      0      0      0      0      0      0      0      0      0      0      0

Number of blocks type Unmovable Reclaimable Movable Reserve <NULL>

Node 1, zone    DMA32          441            6          319            2            0 
Node 1, zone   Normal           84            6          165            1            0 
Name                   Objects Objsize    Space Slabs/Part/Cpu  O/S O %Fr %Ef Flg
:0000016                  2497      16    61.4K         15/7/4  256 0  46  65 *
:0000024                   854      24    28.6K          7/2/4  170 0  28  71 *
:0000032                 47932      32     1.5M       375/16/4  128 0   4  99 *
:0000040                   528      40    24.5K          6/0/4  102 0   0  85 *
:0000056                   142      56    16.3K          4/0/4   73 0   0  48 *
:0000064                 30292      64     2.1M      532/168/4   64 0  31  88 *
:0000072                   145      72    12.2K          3/0/3   56 0   0  84 *
:0000080                  7171      80   577.5K        141/1/4   51 0   0  99 *
:0000096                  1968      96   204.8K         50/6/4   42 0  12  92 *
:0000128                   855     128   204.8K        50/37/4   32 0  74  53 *
:0000192                 14659     192     6.4M    1569/1197/4   21 0  76  43 *
:0000256                   417     256   122.8K         30/6/4   16 0  20  86 *
:0000272                   525     272   143.3K         35/0/1   15 0   0  99 *
:0000320                    12     320     4.0K          1/0/1   12 0   0  93 *A
:0000384                    50     376    32.7K          8/3/4   10 0  37  57 *A
:0000448                    33     420    20.4K          5/1/4    9 0  20  67 *A
:0000512                   447     512   253.9K        62/11/4    8 0  17  90 *
:0000704                   136     704   180.2K        22/13/4   11 1  59  53 *A
:0000768                    80     760    94.2K        23/12/4    5 0  52  64 *A
:0000832                   171     832   212.9K         26/9/4    9 1  34  66 *A
:0000960                    15     912    16.3K          4/0/3    4 0   0  83 *A
:0001024                   393    1024   442.3K       108/15/4    4 0  13  90 *
:0002048                   507    2048     1.1M       137/18/4    4 1  13  92 *
:0004096                    42    4096   180.2K         22/0/4    2 1   0  95 *A
anon_vma                   622      24    53.2K         13/9/4  128 0  69  28 
bdev_cache                  33     760    28.6K          7/0/4    5 0   0  87 Aa
blkdev_queue                19    1632    32.7K          4/0/4    5 1   0  94 
blkdev_requests             45     288    20.4K          5/1/4   14 0  20  63 
buffer_head              84536     104     9.0M      2211/90/4   39 0   4  97 a
cfq_io_context              63     152    16.3K          4/0/4   26 0   0  58 
cfq_queue                   85     136    16.3K          4/0/4   30 0   0  70 
dentry                  103088     200    23.6M    5769/1187/4   20 0  20  87 a
file_lock_cache             77     176    16.3K          4/0/4   22 0   0  82 
hugetlbfs_inode_cache        7     576     4.0K          1/0/1    7 0   0  98 
idr_layer_cache            199     528   131.0K         32/5/4    7 0  15  80 
inode_cache               3219     560     1.9M       465/10/4    7 0   2  94 a
kmalloc-8                 2698       8    32.7K          8/3/4  512 0  37  65 
kmem_cache_node            252      56    20.4K          5/2/3   73 0  40  68 *
mqueue_inode_cache           4     848     4.0K          1/0/1    4 0   0  82 A
nfs_inode_cache          14768     928    15.1M       3692/0/4    4 0   0  90 a
proc_inode_cache          1902     592     1.3M       327/24/4    6 0   7  84 a
radix_tree_node          29226     552    18.8M     4614/962/4    7 0  20  85 
revokefs_inode_cache         6     584     4.0K          1/0/1    6 0   0  85 Aa
rpc_inode_cache             18     784    16.3K          2/0/2    9 1   0  86 Aa
shmem_inode_cache          944     768   794.6K        194/6/4    5 0   3  91 
sighand_cache              124    2088   417.7K        51/15/4    3 1  29  61 A
sigqueue                    74     160    16.3K          4/0/4   25 0   0  72 
sock_inode_cache           136     640   172.0K         21/9/4   11 1  42  50 Aa
task_struct                126    1808   352.2K        43/18/4    4 1  41  64 
TCP                         13    1584    32.7K          4/0/4    5 1   0  62 A
TCPv6                        8    1728    16.3K          2/0/2    4 1   0  84 A
vm_area_struct            1028     176   303.1K        74/50/4   23 0  67  59 
xfs_acl                     52     304    16.3K          4/0/4   13 0   0  96 
xfs_buf_item                53     184    16.3K          4/0/4   22 0   0  59 
xfs_da_state                29     488    16.3K          4/0/4    8 0   0  86 
xfs_efd_item                22     360    16.3K          4/0/4   11 0   0  48 
xfs_efi_item                22     352    16.3K          4/0/4   11 0   0  47 
xfs_inode                46712     504    23.9M      5846/26/4    8 0   0  98 Aa
xfs_vnode                46717     560    27.3M      6679/19/4    7 0   0  95 Aa
Name                   Objects Objsize    Space Slabs/Part/Cpu  O/S O %Fr %Ef Flg
:0000016                  2356      16    57.3K         14/6/4  256 0  42  65 *
:0000024                   564      24    24.5K          6/1/4  170 0  16  55 *
:0000032                  1744      32   118.7K        29/20/4  128 0  68  46 *
:0000040                   434      40    28.6K          7/1/4  102 0  14  60 *
:0000056                   145      56    16.3K          4/0/4   73 0   0  49 *
:0000064                  3423      64   266.2K        65/17/4   64 0  26  82 *
:0000072                    92      72    12.2K          3/0/3   56 0   0  53 *
:0000080                  7171      80   577.5K        141/1/4   51 0   0  99 *
:0000096                  1764      96   180.2K         44/4/4   42 0   9  93 *
:0000128                   545     128   122.8K        30/18/4   32 0  60  56 *
:0000192                  1597     192   442.3K       108/37/4   21 0  34  69 *
:0000256                   391     256   110.5K         27/3/4   16 0  11  90 *
:0000272                   525     272   143.3K         35/0/1   15 0   0  99 *
:0000320                    12     320     4.0K          1/0/1   12 0   0  93 *A
:0000384                    59     376    36.8K          9/4/4   10 0  44  60 *A
:0000448                    27     420    24.5K          6/2/4    9 0  33  46 *A
:0000512                   437     512   245.7K        60/12/4    8 0  20  91 *
:0000704                    46     704    81.9K         10/6/4   11 1  60  39 *A
:0000768                    62     760    77.8K         19/8/4    5 0  42  60 *A
:0000832                   159     832   229.3K        28/12/4    9 1  42  57 *A
:0000960                    15     912    16.3K          4/0/3    4 0   0  83 *A
:0001024                   389    1024   442.3K       108/18/4    4 0  16  90 *
:0002048                   503    2048     1.0M       134/16/4    4 1  11  93 *
:0004096                    41    4096   180.2K         22/0/4    2 1   0  93 *A
anon_vma                   395      24    45.0K         11/7/4  128 0  63  21 
bdev_cache                  33     760    28.6K          7/0/4    5 0   0  87 Aa
blkdev_queue                19    1632    32.7K          4/0/4    5 1   0  94 
blkdev_requests             52     288    24.5K          6/2/4   14 0  33  60 
buffer_head                 94     104    16.3K          4/0/4   39 0   0  59 a
cfq_io_context              71     152    20.4K          5/1/4   26 0  20  52 
cfq_queue                   80     136    20.4K          5/1/4   30 0  20  53 
dentry                    1552     200   512.0K       125/80/4   20 0  64  60 a
file_lock_cache             72     176    16.3K          4/0/4   22 0   0  77 
hugetlbfs_inode_cache        7     576     4.0K          1/0/1    7 0   0  98 
idr_layer_cache            197     528   131.0K         32/6/4    7 0  18  79 
inode_cache                420     560   262.1K         64/2/4    7 0   3  89 a
kmalloc-8                 2692       8    32.7K          8/3/4  512 0  37  65 
kmem_cache_node            252      56    20.4K          5/2/3   73 0  40  68 *
mqueue_inode_cache           4     848     4.0K          1/0/1    4 0   0  82 A
nfs_inode_cache              9     928    16.3K          4/0/4    4 0   0  50 a
proc_inode_cache            49     592    57.3K         14/4/4    6 0  28  50 a
radix_tree_node            310     552   389.1K        95/81/4    7 0  85  43 
revokefs_inode_cache         6     584     4.0K          1/0/1    6 0   0  85 Aa
rpc_inode_cache             12     784    16.3K          2/0/2    9 1   0  57 Aa
shmem_inode_cache          944     768   794.6K        194/6/4    5 0   3  91 
sighand_cache              114    2088   360.4K        44/11/4    3 1  25  66 A
sigqueue                    33     160    16.3K          4/0/4   25 0   0  32 
sock_inode_cache            39     640    73.7K          9/4/4   11 1  44  33 Aa
task_struct                116    1808   319.4K        39/16/4    4 1  41  65 
TCP                          7    1584    32.7K          4/0/4    5 1   0  33 A
TCPv6                        7    1728    16.3K          2/0/2    4 1   0  73 A
vm_area_struct             491     176   155.6K        38/30/4   23 0  78  55 
xfs_acl                     52     304    16.3K          4/0/4   13 0   0  96 
xfs_buf_item                36     184    16.3K          4/0/4   22 0   0  40 
xfs_da_state                25     488    16.3K          4/0/4    8 0   0  74 
xfs_efd_item                 3     360    16.3K          4/0/4   11 0   0   6 
xfs_efi_item                 3     352    16.3K          4/0/4   11 0   0   6 
xfs_inode                  111     504   147.4K        36/30/4    8 0  83  37 Aa
xfs_vnode                  117     560   147.4K        36/27/4    7 0  75  44 Aa
[ 8482.010000] SysRq : Show Memory
[ 8482.020000] Mem-info:
[ 8482.020000] Node 0 DMA per-cpu:
[ 8482.020000] CPU    0: Hot: hi:    0, btch:   1 usd:   0   Cold: hi:    0, btch:   1 usd:   0
[ 8482.020000] CPU    1: Hot: hi:    0, btch:   1 usd:   0   Cold: hi:    0, btch:   1 usd:   0
[ 8482.020000] CPU    2: Hot: hi:    0, btch:   1 usd:   0   Cold: hi:    0, btch:   1 usd:   0
[ 8482.020000] CPU    3: Hot: hi:    0, btch:   1 usd:   0   Cold: hi:    0, btch:   1 usd:   0
[ 8482.020000] Node 0 DMA32 per-cpu:
[ 8482.020000] CPU    0: Hot: hi:  186, btch:  31 usd: 172   Cold: hi:   62, btch:  15 usd:   3
[ 8482.020000] CPU    1: Hot: hi:  186, btch:  31 usd: 155   Cold: hi:   62, btch:  15 usd:  13
[ 8482.020000] CPU    2: Hot: hi:  186, btch:  31 usd:   0   Cold: hi:   62, btch:  15 usd:   0
[ 8482.020000] CPU    3: Hot: hi:  186, btch:  31 usd:   0   Cold: hi:   62, btch:  15 usd:   0
[ 8482.020000] Node 1 DMA32 per-cpu:
[ 8482.020000] CPU    0: Hot: hi:  186, btch:  31 usd:  61   Cold: hi:   62, btch:  15 usd:   0
[ 8482.020000] CPU    1: Hot: hi:  186, btch:  31 usd:   0   Cold: hi:   62, btch:  15 usd:   0
[ 8482.020000] CPU    2: Hot: hi:  186, btch:  31 usd: 160   Cold: hi:   62, btch:  15 usd:  15
[ 8482.020000] CPU    3: Hot: hi:  186, btch:  31 usd: 165   Cold: hi:   62, btch:  15 usd:  10
[ 8482.020000] Node 1 Normal per-cpu:
[ 8482.020000] CPU    0: Hot: hi:  186, btch:  31 usd:   0   Cold: hi:   62, btch:  15 usd:   0
[ 8482.020000] CPU    1: Hot: hi:  186, btch:  31 usd:   0   Cold: hi:   62, btch:  15 usd:   0
[ 8482.020000] CPU    2: Hot: hi:  186, btch:  31 usd: 142   Cold: hi:   62, btch:  15 usd:  23
[ 8482.020000] CPU    3: Hot: hi:  186, btch:  31 usd: 154   Cold: hi:   62, btch:  15 usd:   9
[ 8482.020000] Active:60448 inactive:150421 dirty:3 writeback:0 unstable:0
[ 8482.020000]  free:166065 slab:33652 mapped:1197 pagetables:318 bounce:0
[ 8482.020000] Node 0 DMA free:9416kB min:16kB low:20kB high:24kB active:0kB inactive:0kB present:8876kB pages_scanned:0 all_unreclaimable? no
[ 8482.020000] lowmem_reserve[]: 0 2004 2004 2004
[ 8482.020000] Node 0 DMA32 free:505572kB min:4040kB low:5048kB high:6060kB active:149304kB inactive:347476kB present:2052320kB pages_scanned:0 all_unreclaimable? no
[ 8482.020000] lowmem_reserve[]: 0 0 0 0
[ 8482.020000] Node 1 DMA32 free:78660kB min:3040kB low:3800kB high:4560kB active:37044kB inactive:125728kB present:1544000kB pages_scanned:0 all_unreclaimable? no
[ 8482.020000] lowmem_reserve[]: 0 0 505 505
[ 8482.020000] Node 1 Normal free:70612kB min:1016kB low:1268kB high:1524kB active:55444kB inactive:128480kB present:517120kB pages_scanned:0 all_unreclaimable? no
[ 8482.020000] lowmem_reserve[]: 0 0 0 0
[ 8482.020000] Node 0 DMA: 10*4kB 10*8kB 5*16kB 8*32kB 4*64kB 4*128kB 6*256kB 3*512kB 3*1024kB 1*2048kB 0*4096kB = 9416kB
[ 8482.020000] Node 0 DMA32: 6823*4kB 8419*8kB 9567*16kB 4698*32kB 1296*64kB 100*128kB 24*256kB 7*512kB 0*1024kB 1*2048kB 0*4096kB = 505572kB
[ 8482.020000] Node 1 DMA32: 4441*4kB 1388*8kB 618*16kB 167*32kB 72*64kB 26*128kB 12*256kB 10*512kB 4*1024kB 3*2048kB 2*4096kB = 78660kB
[ 8482.020000] Node 1 Normal: 617*4kB 484*8kB 319*16kB 225*32kB 112*64kB 26*128kB 14*256kB 12*512kB 11*1024kB 6*2048kB 2*4096kB = 70612kB
[ 8482.020000] Swap cache: add 10949, delete 10942, find 3781/4195, race 0+0
[ 8482.020000] Free swap  = 9775356kB
[ 8482.020000] Total swap = 9775416kB
[ 8482.020000] Free swap:       9775356kB
[ 8482.080000] 1048576 pages of RAM
[ 8482.080000] 33124 reserved pages
[ 8482.080000] 89800 pages shared
[ 8482.080000] 7 pages swap cached
[11255.020000] SysRq : Show Memory
[11255.030000] Mem-info:
[11255.030000] Node 0 DMA per-cpu:
[11255.030000] CPU    0: Hot: hi:    0, btch:   1 usd:   0   Cold: hi:    0, btch:   1 usd:   0
[11255.030000] CPU    1: Hot: hi:    0, btch:   1 usd:   0   Cold: hi:    0, btch:   1 usd:   0
[11255.030000] CPU    2: Hot: hi:    0, btch:   1 usd:   0   Cold: hi:    0, btch:   1 usd:   0
[11255.030000] CPU    3: Hot: hi:    0, btch:   1 usd:   0   Cold: hi:    0, btch:   1 usd:   0
[11255.030000] Node 0 DMA32 per-cpu:
[11255.030000] CPU    0: Hot: hi:  186, btch:  31 usd: 167   Cold: hi:   62, btch:  15 usd:  50
[11255.030000] CPU    1: Hot: hi:  186, btch:  31 usd: 163   Cold: hi:   62, btch:  15 usd:  56
[11255.030000] CPU    2: Hot: hi:  186, btch:  31 usd: 140   Cold: hi:   62, btch:  15 usd:   0
[11255.030000] CPU    3: Hot: hi:  186, btch:  31 usd:  22   Cold: hi:   62, btch:  15 usd:   0
[11255.030000] Node 1 DMA32 per-cpu:
[11255.030000] CPU    0: Hot: hi:  186, btch:  31 usd:   0   Cold: hi:   62, btch:  15 usd:   0
[11255.030000] CPU    1: Hot: hi:  186, btch:  31 usd:   0   Cold: hi:   62, btch:  15 usd:   0
[11255.030000] CPU    2: Hot: hi:  186, btch:  31 usd: 105   Cold: hi:   62, btch:  15 usd:  50
[11255.030000] CPU    3: Hot: hi:  186, btch:  31 usd:  77   Cold: hi:   62, btch:  15 usd:  16
[11255.030000] Node 1 Normal per-cpu:
[11255.030000] CPU    0: Hot: hi:  186, btch:  31 usd:   0   Cold: hi:   62, btch:  15 usd:   0
[11255.030000] CPU    1: Hot: hi:  186, btch:  31 usd:   0   Cold: hi:   62, btch:  15 usd:   0
[11255.030000] CPU    2: Hot: hi:  186, btch:  31 usd: 159   Cold: hi:   62, btch:  15 usd:   5
[11255.030000] CPU    3: Hot: hi:  186, btch:  31 usd:  99   Cold: hi:   62, btch:  15 usd:  15
[11255.030000] Active:139 inactive:781 dirty:1 writeback:0 unstable:0
[11255.030000]  free:70942 slab:1967 mapped:192 pagetables:143 bounce:0
[11255.030000] Node 0 DMA free:8016kB min:16kB low:20kB high:24kB active:0kB inactive:0kB present:8876kB pages_scanned:0 all_unreclaimable? yes
[11255.030000] lowmem_reserve[]: 0 2004 2004 2004
[11255.030000] Node 0 DMA32 free:268808kB min:4040kB low:5048kB high:6060kB active:376kB inactive:2024kB present:2052320kB pages_scanned:0 all_unreclaimable? no
[11255.030000] lowmem_reserve[]: 0 0 0 0
[11255.030000] Node 1 DMA32 free:5816kB min:3040kB low:3800kB high:4560kB active:64kB inactive:308kB present:1544000kB pages_scanned:177 all_unreclaimable? no
[11255.030000] lowmem_reserve[]: 0 0 505 505
[11255.030000] Node 1 Normal free:1128kB min:1016kB low:1268kB high:1524kB active:116kB inactive:792kB present:517120kB pages_scanned:0 all_unreclaimable? no
[11255.030000] lowmem_reserve[]: 0 0 0 0
[11255.030000] Node 0 DMA: 6*4kB 7*8kB 4*16kB 6*32kB 4*64kB 2*128kB 4*256kB 2*512kB 1*1024kB 2*2048kB 0*4096kB = 8016kB
[11255.030000] Node 0 DMA32: 66610*4kB 20*8kB 8*16kB 1*32kB 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 1*2048kB 0*4096kB = 268808kB
[11255.030000] Node 1 DMA32: 436*4kB 5*8kB 2*16kB 3*32kB 1*64kB 2*128kB 0*256kB 1*512kB 1*1024kB 1*2048kB 0*4096kB = 5816kB
[11255.030000] Node 1 Normal: 102*4kB 34*8kB 6*16kB 5*32kB 3*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 1128kB
[11255.030000] Swap cache: add 606569, delete 606407, find 129878/215652, race 2+9
[11255.030000] Free swap  = 9770512kB
[11255.030000] Total swap = 9775416kB
[11255.030000] Free swap:       9770512kB
[11255.090000] 1048576 pages of RAM
[11255.090000] 33124 reserved pages
[11255.090000] 297 pages shared
[11255.090000] 163 pages swap cached
Node 0, zone      DMA
  pages free     2354
        min      4
        low      5
        high     6
        scanned  0 (a: 11 i: 11)
        spanned  4096
        present  2219
    nr_free_pages 2354
    nr_inactive  0
    nr_active    0
    nr_anon_pages 0
    nr_mapped    0
    nr_file_pages 0
    nr_dirty     0
    nr_writeback 0
    nr_slab_reclaimable 1
    nr_slab_unreclaimable 0
    nr_page_table_pages 0
    nr_unstable  0
    nr_bounce    0
    nr_vmscan_write 91
    numa_hit     2974
    numa_miss    5283
    numa_foreign 0
    numa_interleave 0
    numa_local   2974
    numa_other   5283
        protection: (0, 2004, 2004, 2004)
  pagesets
    cpu: 0 pcp: 0
              count: 0
              high:  0
              batch: 1
    cpu: 0 pcp: 1
              count: 0
              high:  0
              batch: 1
  vm stats threshold: 6
    cpu: 1 pcp: 0
              count: 0
              high:  0
              batch: 1
    cpu: 1 pcp: 1
              count: 0
              high:  0
              batch: 1
  vm stats threshold: 6
    cpu: 2 pcp: 0
              count: 0
              high:  0
              batch: 1
    cpu: 2 pcp: 1
              count: 0
              high:  0
              batch: 1
  vm stats threshold: 6
    cpu: 3 pcp: 0
              count: 0
              high:  0
              batch: 1
    cpu: 3 pcp: 1
              count: 0
              high:  0
              batch: 1

vm stats threshold: 6
all_unreclaimable: 0
prev_priority: 12
start_pfn: 0
Node 0, zone DMA32

  pages free     126326
        min      1010
        low      1262
        high     1515
        scanned  0 (a: 0 i: 0)
        spanned  520192
        present  513080
    nr_free_pages 126326
    nr_inactive  86946
    nr_active    37249
    nr_anon_pages 1506
    nr_mapped    974
    nr_file_pages 122689
    nr_dirty     0
    nr_writeback 0
    nr_slab_reclaimable 17106
    nr_slab_unreclaimable 5184
    nr_page_table_pages 212
    nr_unstable  0
    nr_bounce    0
    nr_vmscan_write 0
    numa_hit     150802043
    numa_miss    14802772
    numa_foreign 335606
    numa_interleave 3463
    numa_local   150801929
    numa_other   14802886
        protection: (0, 0, 0, 0)
  pagesets
    cpu: 0 pcp: 0
              count: 172
              high:  186
              batch: 31
    cpu: 0 pcp: 1
              count: 3
              high:  62
              batch: 15
  vm stats threshold: 30
    cpu: 1 pcp: 0
              count: 155
              high:  186
              batch: 31
    cpu: 1 pcp: 1
              count: 13
              high:  62
              batch: 15
  vm stats threshold: 30
    cpu: 2 pcp: 0
              count: 67
              high:  186
              batch: 31
    cpu: 2 pcp: 1
              count: 0
              high:  62
              batch: 15
  vm stats threshold: 30
    cpu: 3 pcp: 0
              count: 0
              high:  186
              batch: 31
    cpu: 3 pcp: 1
              count: 0
              high:  62
              batch: 15

vm stats threshold: 30
all_unreclaimable: 0
prev_priority: 12
start_pfn: 4096
Node 1, zone DMA32

  pages free     19665
        min      760
        low      950
        high     1140
        scanned  0 (a: 0 i: 22)
        spanned  524288
        present  386000
    nr_free_pages 19665
    nr_inactive  31432
    nr_active    9261
    nr_anon_pages 2
    nr_mapped    0
    nr_file_pages 40691
    nr_dirty     0
    nr_writeback 0
    nr_slab_reclaimable 4678
    nr_slab_unreclaimable 1413
    nr_page_table_pages 0
    nr_unstable  0
    nr_bounce    0
    nr_vmscan_write 1999
    numa_hit     79992534
    numa_miss    192158
    numa_foreign 0
    numa_interleave 8
    numa_local   79992526
    numa_other   192166
        protection: (0, 0, 505, 505)
  pagesets
    cpu: 0 pcp: 0
              count: 61
              high:  186
              batch: 31
    cpu: 0 pcp: 1
              count: 0
              high:  62
              batch: 15
  vm stats threshold: 30
    cpu: 1 pcp: 0
              count: 0
              high:  186
              batch: 31
    cpu: 1 pcp: 1
              count: 0
              high:  62
              batch: 15
  vm stats threshold: 30
    cpu: 2 pcp: 0
              count: 160
              high:  186
              batch: 31
    cpu: 2 pcp: 1
              count: 15
              high:  62
              batch: 15
  vm stats threshold: 30
    cpu: 3 pcp: 0
              count: 165
              high:  186
              batch: 31
    cpu: 3 pcp: 1
              count: 10
              high:  62
              batch: 15

vm stats threshold: 30
all_unreclaimable: 0
prev_priority: 12
start_pfn: 524288
Node 1, zone Normal

  pages free     17894
        min      254
        low      317
        high     381
        scanned  0 (a: 0 i: 0)
        spanned  131072
        present  129280
    nr_free_pages 17894
    nr_inactive  31983
    nr_active    13865
    nr_anon_pages 741
    nr_mapped    220
    nr_file_pages 45135
    nr_dirty     1
    nr_writeback 0
    nr_slab_reclaimable 3258
    nr_slab_unreclaimable 2014
    nr_page_table_pages 106
    nr_unstable  0
    nr_bounce    0
    nr_vmscan_write 11906
    numa_hit     20852363
    numa_miss    143448
    numa_foreign 14808055
    numa_interleave 3453
    numa_local   20849005
    numa_other   146806
        protection: (0, 0, 0, 0)
  pagesets
    cpu: 0 pcp: 0
              count: 0
              high:  186
              batch: 31
    cpu: 0 pcp: 1
              count: 0
              high:  62
              batch: 15
  vm stats threshold: 18
    cpu: 1 pcp: 0
              count: 0
              high:  186
              batch: 31
    cpu: 1 pcp: 1
              count: 0
              high:  62
              batch: 15
  vm stats threshold: 18
    cpu: 2 pcp: 0
              count: 120
              high:  186
              batch: 31
    cpu: 2 pcp: 1
              count: 11
              high:  62
              batch: 15
  vm stats threshold: 18
    cpu: 3 pcp: 0
              count: 99
              high:  186
              batch: 31
    cpu: 3 pcp: 1
              count: 3
              high:  62
              batch: 15

vm stats threshold: 18
all_unreclaimable: 0
prev_priority: 12
start_pfn: 1048576

Node 0, zone DMA

  pages free     2004
        min      4
        low      5
        high     6
        scanned  0 (a: 5 i: 5)
        spanned  4096
        present  2219
    nr_free_pages 2004
    nr_inactive  0
    nr_active    0
    nr_anon_pages 0
    nr_mapped    0
    nr_file_pages 0
    nr_dirty     0
    nr_writeback 0
    nr_slab_reclaimable 0
    nr_slab_unreclaimable 0
    nr_page_table_pages 0
    nr_unstable  0
    nr_bounce    0
    nr_vmscan_write 91
    numa_hit     7439
    numa_miss    12311
    numa_foreign 0
    numa_interleave 0
    numa_local   7439
    numa_other   12311
        protection: (0, 2004, 2004, 2004)
  pagesets
    cpu: 0 pcp: 0
              count: 0
              high:  0
              batch: 1
    cpu: 0 pcp: 1
              count: 0
              high:  0
              batch: 1
  vm stats threshold: 6
    cpu: 1 pcp: 0
              count: 0
              high:  0
              batch: 1
    cpu: 1 pcp: 1
              count: 0
              high:  0
              batch: 1
  vm stats threshold: 6
    cpu: 2 pcp: 0
              count: 0
              high:  0
              batch: 1
    cpu: 2 pcp: 1
              count: 0
              high:  0
              batch: 1
  vm stats threshold: 6
    cpu: 3 pcp: 0
              count: 0
              high:  0
              batch: 1
    cpu: 3 pcp: 1
              count: 0
              high:  0
              batch: 1

vm stats threshold: 6
all_unreclaimable: 1
prev_priority: 12
start_pfn: 0
Node 0, zone DMA32

  pages free     67771
        min      1010
        low      1262
        high     1515
        scanned  579 (a: 13 i: 1)
        spanned  520192
        present  513080
    nr_free_pages 67771
    nr_inactive  178
    nr_active    2
    nr_anon_pages 0
    nr_mapped    5
    nr_file_pages 151
    nr_dirty     0
    nr_writeback 0
    nr_slab_reclaimable 157
    nr_slab_unreclaimable 854
    nr_page_table_pages 138
    nr_unstable  0
    nr_bounce    0
    nr_vmscan_write 219556
    numa_hit     160297810
    numa_miss    21130360
    numa_foreign 402418
    numa_interleave 3463
    numa_local   160297696
    numa_other   21130474
        protection: (0, 0, 0, 0)
  pagesets
    cpu: 0 pcp: 0
              count: 176
              high:  186
              batch: 31
    cpu: 0 pcp: 1
              count: 53
              high:  62
              batch: 15
  vm stats threshold: 30
    cpu: 1 pcp: 0
              count: 155
              high:  186
              batch: 31
    cpu: 1 pcp: 1
              count: 35
              high:  62
              batch: 15
  vm stats threshold: 30
    cpu: 2 pcp: 0
              count: 58
              high:  186
              batch: 31
    cpu: 2 pcp: 1
              count: 13
              high:  62
              batch: 15
  vm stats threshold: 30
    cpu: 3 pcp: 0
              count: 29
              high:  186
              batch: 31
    cpu: 3 pcp: 1
              count: 0
              high:  62
              batch: 15

vm stats threshold: 30
all_unreclaimable: 1
prev_priority: 12
start_pfn: 4096
Node 1, zone DMA32

  pages free     1435
        min      760
        low      950
        high     1140
        scanned  60 (a: 0 i: 4)
        spanned  524288
        present  386000
    nr_free_pages 1435
    nr_inactive  3
    nr_active    30
    nr_anon_pages 0
    nr_mapped    0
    nr_file_pages 4
    nr_dirty     1
    nr_writeback 0
    nr_slab_reclaimable 19
    nr_slab_unreclaimable 17
    nr_page_table_pages 0
    nr_unstable  0
    nr_bounce    0
    nr_vmscan_write 3476
    numa_hit     82078765
    numa_miss    249206
    numa_foreign 0
    numa_interleave 8
    numa_local   82078757
    numa_other   249214
        protection: (0, 0, 505, 505)
  pagesets
    cpu: 0 pcp: 0
              count: 0
              high:  186
              batch: 31
    cpu: 0 pcp: 1
              count: 0
              high:  62
              batch: 15
  vm stats threshold: 30
    cpu: 1 pcp: 0
              count: 0
              high:  186
              batch: 31
    cpu: 1 pcp: 1
              count: 0
              high:  62
              batch: 15
  vm stats threshold: 30
    cpu: 2 pcp: 0
              count: 103
              high:  186
              batch: 31
    cpu: 2 pcp: 1
              count: 58
              high:  62
              batch: 15
  vm stats threshold: 30
    cpu: 3 pcp: 0
              count: 105
              high:  186
              batch: 31
    cpu: 3 pcp: 1
              count: 55
              high:  62
              batch: 15

vm stats threshold: 30
all_unreclaimable: 0
prev_priority: 1
start_pfn: 524288
Node 1, zone Normal

  pages free     315
        min      254
        low      317
        high     381
        scanned  186 (a: 25 i: 0)
        spanned  131072
        present  129280
    nr_free_pages 315
    nr_inactive  224
    nr_active    28
    nr_anon_pages 11
    nr_mapped    72
    nr_file_pages 244
    nr_dirty     0
    nr_writeback 0
    nr_slab_reclaimable 99
    nr_slab_unreclaimable 824
    nr_page_table_pages 16
    nr_unstable  0
    nr_bounce    0
    nr_vmscan_write 18978
    numa_hit     23281331
    numa_miss    153212
    numa_foreign 21142691
    numa_interleave 3453
    numa_local   23277973
    numa_other   156570
        protection: (0, 0, 0, 0)
  pagesets
    cpu: 0 pcp: 0
              count: 0
              high:  186
              batch: 31
    cpu: 0 pcp: 1
              count: 0
              high:  62
              batch: 15
  vm stats threshold: 18
    cpu: 1 pcp: 0
              count: 0
              high:  186
              batch: 31
    cpu: 1 pcp: 1
              count: 0
              high:  62
              batch: 15
  vm stats threshold: 18
    cpu: 2 pcp: 0
              count: 98
              high:  186
              batch: 31
    cpu: 2 pcp: 1
              count: 14
              high:  62
              batch: 15
  vm stats threshold: 18
    cpu: 3 pcp: 0
              count: 63
              high:  186
              batch: 31
    cpu: 3 pcp: 1
              count: 43
              high:  62
              batch: 15

vm stats threshold: 18
all_unreclaimable: 1
prev_priority: 1
start_pfn: 1048576

Andrew Morton

author maintainer

2007-10-14 18:40 UTC #31 lore raw

Quoted 5 lines · On Sun, 14 Oct 2007 13:54:26 +0200 "Torsten Kaiser"…

Quoted 4 lines
The page-owner code can pinpoint a leak source. See ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.23/2.6.23-mm1/broken-out/page-owner-tracking-leak-detector.patch
Enable CONFIG_DEBUG_SLAB_LEAK, check out /proc/slab_allocators

Quoted 7 lines

Did that. The output of /proc/page_owner is ~350Mb, gzipped still ~7Mb.
Taking only the first line from each stackdump it shows the following counts:
...
354042 [0xffffffff80266373] mempool_alloc+83

This one is suspicious. Can you find the whole record for it?

The other info shows a tremendous memory leak, not via slab. Looks like someone is running alloc_pages() directly and isnb't giving them back.

Torsten Kaiser

2007-10-14 19:12 UTC #32 lore raw

Quoted 9 lines · Andrew Morton

Quoted 7 lines · On Sun, 14 Oct 2007 13:54:26 +0200 "Torsten Kaiser"…
Quoted 4 lines
The page-owner code can pinpoint a leak source. See ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.23/2.6.23-mm1/broken-out/page-owner-tracking-leak-detector.patch
Enable CONFIG_DEBUG_SLAB_LEAK, check out /proc/slab_allocators
Did that. The output of /proc/page_owner is ~350Mb, gzipped still ~7Mb.

Quoted 7 lines

Quoted 5 lines
Taking only the first line from each stackdump it shows the following counts:
...
354042 [0xffffffff80266373] mempool_alloc+83
This one is suspicious. Can you find the whole record for it?

I still have all 354042 records of it. ;)
The first column is the times I found this line in page_owner. I divided the counts for the duplicate lines (mempool_alloc+83 and kcryptd_do_crypt+0) by two, so normalize them. There still are some false positive counts in there, so it does not match the 354042 precisely.

354036 Page allocated via order 0, mask 0x11202
1 (PFN/Block always differ) PFN 3072 Block 6 type 0 Flags
354338 [0xffffffff80266373] mempool_alloc+83
354338 [0xffffffff80266373] mempool_alloc+83
354025 [0xffffffff802bb389] bio_alloc_bioset+185
354058 [0xffffffff804d2b40] kcryptd_do_crypt+0
354052 [0xffffffff804d2cc7] kcryptd_do_crypt+391
354058 [0xffffffff804d2b40] kcryptd_do_crypt+0
354052 [0xffffffff80245d3c] run_workqueue+204
354062 [0xffffffff802467b0] worker_thread+0

I'm using dm-crypt with CONFIG_CRYPTO_TWOFISH_X86_64

Quoted 2 lines

The other info shows a tremendous memory leak, not via slab. Looks like someone is running alloc_pages() directly and isnb't giving them back.

Blaming it on dm-crypt looks right, as the leak seems to happens, if there is (heavy) disk activity.
(updatedb just ate ~500 Mb)

Torsten

Andrew Morton

author maintainer

2007-10-14 19:26 UTC #33 lore raw

Quoted 12 lines · On Sun, 14 Oct 2007 21:12:08 +0200 "Torsten Kaiser"…

Quoted 11 lines · Andrew Morton
Quoted 9 lines · On Sun, 14 Oct 2007 13:54:26 +0200 "Torsten Kaiser"…
Quoted 4 lines
The page-owner code can pinpoint a leak source. See ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.23/2.6.23-mm1/broken-out/page-owner-tracking-leak-detector.patch
Enable CONFIG_DEBUG_SLAB_LEAK, check out /proc/slab_allocators
Did that. The output of /proc/page_owner is ~350Mb, gzipped still ~7Mb.
Taking only the first line from each stackdump it shows the following counts:

Quoted 8 lines

Quoted 5 lines
Quoted 3 lines
...
354042 [0xffffffff80266373] mempool_alloc+83
This one is suspicious. Can you find the whole record for it?
I still have all 354042 records of it. ;)
The first column is the times I found this line in page_owner.

err, take another look at the changelog in page-owner-tracking-leak-detector.patch. It directs you to Documentation/page_owner.c which aggregates the contents of /proc/page_owner.

Quoted 16 lines

I divided the counts for the duplicate lines (mempool_alloc+83 and kcryptd_do_crypt+0) by two, so normalize them. There still are some false positive counts in there, so it does not match the 354042 precisely.
354036 Page allocated via order 0, mask 0x11202
1 (PFN/Block always differ) PFN 3072 Block 6 type 0 Flags
354338 [0xffffffff80266373] mempool_alloc+83
354338 [0xffffffff80266373] mempool_alloc+83
354025 [0xffffffff802bb389] bio_alloc_bioset+185
354058 [0xffffffff804d2b40] kcryptd_do_crypt+0
354052 [0xffffffff804d2cc7] kcryptd_do_crypt+391
354058 [0xffffffff804d2b40] kcryptd_do_crypt+0
354052 [0xffffffff80245d3c] run_workqueue+204
354062 [0xffffffff802467b0] worker_thread+0

Quoted 9 lines

I'm using dm-crypt with CONFIG_CRYPTO_TWOFISH_X86_64
Quoted 2 lines
The other info shows a tremendous memory leak, not via slab. Looks like someone is running alloc_pages() directly and isnb't giving them back.
Blaming it on dm-crypt looks right, as the leak seems to happens, if there is (heavy) disk activity.
(updatedb just ate ~500 Mb)

Yup, it does appear that dm-crypt is leaking. Let's add some cc's.

Thanks for testing -mm and for reporting this.

Torsten Kaiser

2007-10-14 19:40 UTC #34 lore raw

Quoted 7 lines · Andrew Morton

Quoted 1 line · On Sun, 14 Oct 2007 21:12:08 +0200 "Torsten Kaiser"…
The first column is the times I found this line in page_owner.
err, take another look at the changelog in page-owner-tracking-leak-detector.patch. It directs you to Documentation/page_owner.c which aggregates the contents of /proc/page_owner.

Noting the -v on the grep command, now I understand that this program does in fact what I need.
Not reading this correctly I assumed it collects information only about the PFN lines.

Quoted 21 lines

Quoted 21 lines
I divided the counts for the duplicate lines (mempool_alloc+83 and kcryptd_do_crypt+0) by two, so normalize them. There still are some false positive counts in there, so it does not match the 354042 precisely.
354036 Page allocated via order 0, mask 0x11202
1 (PFN/Block always differ) PFN 3072 Block 6 type 0 Flags
354338 [0xffffffff80266373] mempool_alloc+83
354338 [0xffffffff80266373] mempool_alloc+83
354025 [0xffffffff802bb389] bio_alloc_bioset+185
354058 [0xffffffff804d2b40] kcryptd_do_crypt+0
354052 [0xffffffff804d2cc7] kcryptd_do_crypt+391
354058 [0xffffffff804d2b40] kcryptd_do_crypt+0
354052 [0xffffffff80245d3c] run_workqueue+204
354062 [0xffffffff802467b0] worker_thread+0
I'm using dm-crypt with CONFIG_CRYPTO_TWOFISH_X86_64
Quoted 2 lines
The other info shows a tremendous memory leak, not via slab. Looks like someone is running alloc_pages() directly and isnb't giving them back.

Quoted 6 lines

Quoted 4 lines
Blaming it on dm-crypt looks right, as the leak seems to happens, if there is (heavy) disk activity.
(updatedb just ate ~500 Mb)
Yup, it does appear that dm-crypt is leaking. Let's add some cc's.

Top3 from the page_owner-util:

353978 times:
Page allocated via order 0, mask 0x11202
[0xffffffff80266373] mempool_alloc+83
[0xffffffff80266373] mempool_alloc+83
[0xffffffff802bb389] bio_alloc_bioset+185
[0xffffffff804d2b40] kcryptd_do_crypt+0
[0xffffffff804d2cc7] kcryptd_do_crypt+391
[0xffffffff804d2b40] kcryptd_do_crypt+0
[0xffffffff80245d3c] run_workqueue+204
[0xffffffff802467b0] worker_thread+0

45065 times:
Page allocated via order 0, mask 0x1201d2 [0xffffffff805ae2c2] __down_read+18 [0xffffffff8026c246] __do_page_cache_readahead+230 [0xffffffff8026c576] ondemand_readahead+278 [0xffffffff80264185] do_generic_mapping_read+629 [0xffffffff802635f0] file_read_actor+0 [0xffffffff80265bbe] generic_file_aio_read+254 [0xffffffff8037a98b] xfs_read+347 [0xffffffff8036b793] xfs_access+67

33008 times:
Page allocated via order 0, mask 0x1201d2 [0xffffffff8026c246] __do_page_cache_readahead+230 [0xffffffff8026c576] ondemand_readahead+278 [0xffffffff8026404e] do_generic_mapping_read+318 [0xffffffff802635f0] file_read_actor+0 [0xffffffff80265bbe] generic_file_aio_read+254 [0xffffffff8037a98b] xfs_read+347 [0xffffffff8036b793] xfs_access+67 [0xffffffff80292569] do_sync_read+217

Quoted 1 line

Thanks for testing -mm and for reporting this.

:-)

Torsten

Milan Broz

2007-10-14 22:03 UTC #35 lore raw

In reply to Andrew Morton

Quoted 1 line · Andrew Morton

On Sun, 14 Oct 2007 21:12:08 +0200 "Torsten Kaiser" <[email protected]> wrote:

...

Quoted 13 lines

Quoted 13 lines
354036 Page allocated via order 0, mask 0x11202
1 (PFN/Block always differ) PFN 3072 Block 6 type 0 Flags
354338 [0xffffffff80266373] mempool_alloc+83
354338 [0xffffffff80266373] mempool_alloc+83
354025 [0xffffffff802bb389] bio_alloc_bioset+185
354058 [0xffffffff804d2b40] kcryptd_do_crypt+0
354052 [0xffffffff804d2cc7] kcryptd_do_crypt+391
354058 [0xffffffff804d2b40] kcryptd_do_crypt+0
354052 [0xffffffff80245d3c] run_workqueue+204
354062 [0xffffffff802467b0] worker_thread+0
I'm using dm-crypt with CONFIG_CRYPTO_TWOFISH_X86_64

Quoted 8 lines

Quoted 6 lines
Quoted 2 lines
The other info shows a tremendous memory leak, not via slab. Looks like someone is running alloc_pages() directly and isnb't giving them back.
Blaming it on dm-crypt looks right, as the leak seems to happens, if there is (heavy) disk activity.
(updatedb just ate ~500 Mb)
Yup, it does appear that dm-crypt is leaking. Let's add some cc's.

More precisely - change below from git-block.patch update caused that pages are not deallocated at all. (cc-ing Jens)

-static int crypt_endio(struct bio *clone, unsigned int done, int error) +static void crypt_endio(struct bio *clone, int error)
...
- * free the processed pages, even if
- * it's only a partially completed write
+ * free the processed pages
*/
- if (!read_io)
- crypt_free_buffer_pages(cc, clone, done);
-
- /* keep going - not finished yet */
- if (unlikely(clone->bi_size))
- return 1;
-
- if (!read_io)
+ if (!read_io) {
+ crypt_free_buffer_pages(cc, clone, clone->bi_size);
goto out;
+ }

clone->bi_size is zero here now, so crypt_free_buffer_pages will not work correctly (previously there was count of processed bytes).

But because it seems that bio cannot be processed partially now, we can simplify crypt_free_buffer_pages to always remove all allocated pages.

Milan
--
[email protected]

Jens Axboe

2007-10-15 06:50 UTC #36 lore raw

Quoted 49 lines · Milan Broz

Quoted 1 line · Andrew Morton
On Sun, 14 Oct 2007 21:12:08 +0200 "Torsten Kaiser" <[email protected]> wrote:
...
Quoted 13 lines
Quoted 13 lines
354036 Page allocated via order 0, mask 0x11202
1 (PFN/Block always differ) PFN 3072 Block 6 type 0 Flags
354338 [0xffffffff80266373] mempool_alloc+83
354338 [0xffffffff80266373] mempool_alloc+83
354025 [0xffffffff802bb389] bio_alloc_bioset+185
354058 [0xffffffff804d2b40] kcryptd_do_crypt+0
354052 [0xffffffff804d2cc7] kcryptd_do_crypt+391
354058 [0xffffffff804d2b40] kcryptd_do_crypt+0
354052 [0xffffffff80245d3c] run_workqueue+204
354062 [0xffffffff802467b0] worker_thread+0
I'm using dm-crypt with CONFIG_CRYPTO_TWOFISH_X86_64
Quoted 8 lines
Quoted 6 lines
Quoted 2 lines
The other info shows a tremendous memory leak, not via slab. Looks like someone is running alloc_pages() directly and isnb't giving them back.
Blaming it on dm-crypt looks right, as the leak seems to happens, if there is (heavy) disk activity.
(updatedb just ate ~500 Mb)
Yup, it does appear that dm-crypt is leaking. Let's add some cc's.
More precisely - change below from git-block.patch update caused that pages are not deallocated at all. (cc-ing Jens)
(quoted diff) +5 ~~-11~~
-static int crypt_endio(struct bio *clone, unsigned int done, int error)
+static void crypt_endio(struct bio *clone, int error)
...
-	 * free the processed pages, even if
-	 * it's only a partially completed write
+	 * free the processed pages
 	 */
-	if (!read_io)
-		crypt_free_buffer_pages(cc, clone, done);
-
-	/* keep going - not finished yet */
-	if (unlikely(clone->bi_size))
-		return 1;
-
-	if (!read_io)
+	if (!read_io) {
+		crypt_free_buffer_pages(cc, clone, clone->bi_size);
 		goto out;
+	}

Quoted 5 lines

clone->bi_size is zero here now, so crypt_free_buffer_pages will not work correctly (previously there was count of processed bytes).
But because it seems that bio cannot be processed partially now, we can simplify crypt_free_buffer_pages to always remove all allocated pages.

Neil, this doesn't look very good. dm-crypt needs to know the clone io size, so ->bi_size was definitely used properly in this context before. Now it's gone. Suggestions on how to fix that up?

I've been less than impressed with the bi_end_io() patchset so far, it's been full of typos and bad conversions. I'm tempted to revert the whole thing, clearly it wasn't ready for merge.

Signature · 1 line

Jens Axboe

Neil Brown

2007-10-15 07:31 UTC #37 lore raw

Quoted 11 lines · On Monday October 15, [email protected] wrote:

Quoted 6 lines · Milan Broz
clone->bi_size is zero here now, so crypt_free_buffer_pages will not work correctly (previously there was count of processed bytes).
But because it seems that bio cannot be processed partially now, we can simplify crypt_free_buffer_pages to always remove all allocated pages.
Neil, this doesn't look very good. dm-crypt needs to know the clone io size, so ->bi_size was definitely used properly in this context before. Now it's gone. Suggestions on how to fix that up?

How about the following - even more code simplification gained by this approach :-)

I originally had the patch for removing the 'size' argument after a
patch (series) that made bi_size unchanged. It seemed that patch
would face a harder path upstream so I re-ordered them and missed this dependency. Mea Culpa.

Quoted 4 lines

I've been less than impressed with the bi_end_io() patchset so far, it's been full of typos and bad conversions. I'm tempted to revert the whole thing, clearly it wasn't ready for merge.

I must have missed something ....

I've seen: A fix for a bi_end_io in jfs that I missed.
A correction for that fix ("return 0" was remove instead
of just the '0' removed)
Some fixed for code that is only in -mm (which I didn't do
because I thought you wanted it against a non-mm tree).

I think it was definitely ready for merging in -mm. Possibly not for mainline just yet.

NeilBrown

Signed-off-by Neil Brown <[email protected]>

### Diffstat output

 ./drivers/md/dm-crypt.c |   30 +++++-------------------------
 1 file changed, 5 insertions(+), 25 deletions(-)

drivers/md/dm-crypt.c +5 ~~-25~~

diff .prev/drivers/md/dm-crypt.c ./drivers/md/dm-crypt.c
@@ -444,32 +444,12 @@ static struct bio *crypt_alloc_buffer(st
 }
 
 static void crypt_free_buffer_pages(struct crypt_config *cc,
-				    struct bio *clone, unsigned int bytes)
+				    struct bio *clone)
 {
-	unsigned int i, start, end;
+	unsigned int i;
 	struct bio_vec *bv;
 
-	/*
-	 * This is ugly, but Jens Axboe thinks that using bi_idx in the
-	 * endio function is too dangerous at the moment, so I calculate the
-	 * correct position using bi_vcnt and bi_size.
-	 * The bv_offset and bv_len fields might already be modified but we
-	 * know that we always allocated whole pages.
-	 * A fix to the bi_idx issue in the kernel is in the works, so
-	 * we will hopefully be able to revert to the cleaner solution soon.
-	 */
-	i = clone->bi_vcnt - 1;
-	bv = bio_iovec_idx(clone, i);
-	end = (i << PAGE_SHIFT) + (bv->bv_offset + bv->bv_len) - clone->bi_size;
-	start = end - bytes;
-
-	start >>= PAGE_SHIFT;
-	if (!clone->bi_size)
-		end = clone->bi_vcnt;
-	else
-		end >>= PAGE_SHIFT;
-
-	for (i = start; i < end; i++) {
+	for (i = 0; i < clone->bi_vcnt; i++) {
 		bv = bio_iovec_idx(clone, i);
 		BUG_ON(!bv->bv_page);
 		mempool_free(bv->bv_page, cc->page_pool);

@@ -539,7 +519,7 @@ static void crypt_endio(struct bio *clon
 	 * free the processed pages
 	 */
 	if (!read_io) {
-		crypt_free_buffer_pages(cc, clone, clone->bi_size);
+		crypt_free_buffer_pages(cc, clone);
 		goto out;
 	}

@@ -628,7 +608,7 @@ static void process_write(struct dm_cryp
 		ctx.idx_out = 0;
 
 		if (unlikely(crypt_convert(cc, &ctx) < 0)) {
-			crypt_free_buffer_pages(cc, clone, clone->bi_size);
+			crypt_free_buffer_pages(cc, clone);
 			bio_put(clone);
 			crypt_dec_pending(io, -EIO);
 			return;

Jens Axboe

2007-10-15 07:45 UTC #38 lore raw

Quoted 9 lines · Neil Brown

Quoted 8 lines · On Monday October 15, [email protected] wrote:
Quoted 6 lines · Milan Broz
clone->bi_size is zero here now, so crypt_free_buffer_pages will not work correctly (previously there was count of processed bytes).
But because it seems that bio cannot be processed partially now, we can simplify crypt_free_buffer_pages to always remove all allocated pages.

Quoted 6 lines

Quoted 3 lines
Neil, this doesn't look very good. dm-crypt needs to know the clone io size, so ->bi_size was definitely used properly in this context before. Now it's gone. Suggestions on how to fix that up?
How about the following - even more code simplification gained by this approach :-)

Looks good to me.

Quoted 10 lines

I originally had the patch for removing the 'size' argument after a
patch (series) that made bi_size unchanged. It seemed that patch
would face a harder path upstream so I re-ordered them and missed this dependency. Mea Culpa.
Quoted 4 lines
I've been less than impressed with the bi_end_io() patchset so far, it's been full of typos and bad conversions. I'm tempted to revert the whole thing, clearly it wasn't ready for merge.

Quoted 7 lines

I must have missed something ....
I've seen: A fix for a bi_end_io in jfs that I missed.
A correction for that fix ("return 0" was remove instead
of just the '0' removed)
Some fixed for code that is only in -mm (which I didn't do
because I thought you wanted it against a non-mm tree).

XFS update, s390 block driver, gfs2 update, ocfs2 update, powerpc axonram block driver.

Quoted 2 lines

I think it was definitely ready for merging in -mm. Possibly not for mainline just yet.

What's done is done, I just hope we've seen the last of it now.

Signature · 1 line

Jens Axboe

Jeff Garzik

2007-10-13 18:41 UTC #39 lore raw

In reply to Torsten Kaiser

Quoted 5 lines · Torsten Kaiser

Quoted 4 lines · Jeff Garzik
Quoted 3 lines · Torsten Kaiser
3 boots, all worked. So I'm very sure that was the bug, but I will now do a little load testing...

Quoted 7 lines

Quoted 5 lines
Quoted 2 lines
The only strange thing about 2.6.23-mm1 is, that it takes ~4 second more to boot.
So, you basically applied the attached patch?
Yeah, absence of qc_defer for an NCQ-capable chip would do it.
Yes. The system seems to work correctly now.

Thanks for helping track this down. Fix pushed out to libata-dev.git.

Jeff

Cedric Le Goater

2007-10-12 06:48 UTC #40 lore raw

In reply to KAMEZAWA Hiroyuki

Quoted 16 lines · KAMEZAWA Hiroyuki

Quoted 5 lines · On Thu, 11 Oct 2007 21:31:26 -0700 Andrew Morton <[email protected]>…
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.23/2.6.23-mm1/
- I've been largely avoiding applying anything since rc8-mm2 in an attempt to stabilise things for the 2.6.23 merge.
On RHEL5/x86_64 environment,
==
[kamezawa@hannibal ref-2.6.23-mm1]$ make menuconfig
Makefile:456: /home/kamezawa/ref-2.6.23-mm1/arch//Makefile: No such file or directory
make: *** No rule to make target `/home/kamezawa/ref-2.6.23-mm1/arch//Makefile'. Stop. ==

Quoted 3 lines

$(ARCH) cannot be detected automatically...
What information is useful for fixing this ?

cross compile work but native compile doesn't anymore :(

Here's a tmp fix.

Thanks,

Signed-off-by Cedric Le Goater <[email protected]>

---
 Makefile |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Makefile +1 -1

Index: 2.6.23-mm1/Makefile
===================================================================
@@ -191,7 +191,7 @@ SUBARCH := $(shell uname -m | sed -e s/i
 
 # The empty ARCH and CROSS_COMPILE statements exist so it is easy to
 # patch in hardcoded values for ARCH and CROSS_COMPILE
-ARCH           ?=
+ARCH           ?= $(SUBARCH)
 CROSS_COMPILE  ?=
 
 # Kbuild save the ARCH and CROSS_COMPILE setting in .kbuild

Quoted 10 lines

Thanks,
(quoted diff) +0 -2
-Kame
 
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Mariusz Kozlowski

2007-10-12 06:51 UTC #41 lore raw

PATCH 1/1 add missing parenthesis in cfe_writeblk() macro

In reply to Andrew Morton

Add missing parenthesis in cfe_writeblk() macro.

Signed-off-by Mariusz Kozlowski <[email protected]>

 include/asm-mips/fw/cfe/cfe_api.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

include/asm-mips/fw/cfe/cfe_api.h +1 -1

@@ -154,7 +154,7 @@ int64_t cfe_getticks(void);
 #define cfe_readblk(a, b, c, d)		__cfe_readblk(a, b, c, d)
 #define cfe_setenv(a, b)		__cfe_setenv(a, b)
 #define cfe_write(a, b, c)		__cfe_write(a, b, c)
-#define cfe_writeblk(a, b, c, d		__cfe_writeblk(a, b, c, d)
+#define cfe_writeblk(a, b, c, d)	__cfe_writeblk(a, b, c, d)
 #endif				/* CFE_API_IMPL_NAMESPACE */
 
 int cfe_close(int handle);

Kamalesh Babulal

2007-10-12 07:45 UTC #42 lore raw

Re: 2.6.23-mm1 - build failure on axonram

In reply to Andrew Morton

Hi Andrew,

The build fails with the following error message.

CC arch/powerpc/sysdev/axonram.o
arch/powerpc/sysdev/axonram.c:120:34: error: macro "bio_io_error" passed 2 arguments, but takes just 1 arch/powerpc/sysdev/axonram.c: In function ‘axon_ram_make_request’:
arch/powerpc/sysdev/axonram.c:120: error: ‘bio_io_error’ undeclared (first use in this function) arch/powerpc/sysdev/axonram.c:120: error: (Each undeclared identifier is reported only once arch/powerpc/sysdev/axonram.c:120: error: for each function it appears in.) arch/powerpc/sysdev/axonram.c:134: error: too many arguments to function ‘bio_endio’ make[1]: *** [arch/powerpc/sysdev/axonram.o] Error 1
make: *** [arch/powerpc/sysdev] Error 2

The patch fixes the build failure.

Signed-off-by Kamalesh Babulal <[email protected]>

---

arch/powerpc/sysdev/~axonram.c 2007-10-12 12:51:43.000000000 +0530 renamed from arch/powerpc/sysdev/axonram.c 2007-10-12 12:58:14.000000000 +0530 +2 -2

@@ -117,7 +117,7 @@ axon_ram_make_request(struct request_que
        transfered = 0;
        bio_for_each_segment(vec, bio, idx) {
                if (unlikely(phys_mem + vec->bv_len > phys_end)) {
-                       bio_io_error(bio, bio->bi_size);
+                       bio_io_error(bio);
                        rc = -ERANGE;
                        break;
                }

@@ -131,7 +131,7 @@ axon_ram_make_request(struct request_que
                phys_mem += vec->bv_len;
                transfered += vec->bv_len;
        }
-       bio_endio(bio, transfered, 0);
+       bio_endio(bio, 0); 
 
        return rc;
 }

Signature · 4 lines

Thanks & Regards,
Kamalesh Babulal,
Linux Technology Center,
IBM, ISTL.

Dhaval Giani

2007-10-12 09:49 UTC #43 lore raw

Build Failure (Was Re: 2.6.23-mm1)

In reply to Andrew Morton

Quoted 3 lines · Andrew Morton

ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.23/2.6.23-mm1/

Hi Andrew

My compile just failed with

drivers/scsi/gdth.c: In function ‘gdth_search_dev’:
drivers/scsi/gdth.c:646: warning: ‘pci_find_device’ is deprecated (declared at include/linux/pci.h:482)
drivers/scsi/gdth.c: In function ‘gdth_init_isa’:
drivers/scsi/gdth.c:857: error: ‘gdth_irq_tab’ undeclared (first use in this function)
drivers/scsi/gdth.c:857: error: (Each undeclared identifier is reported only once
drivers/scsi/gdth.c:857: error: for each function it appears in.) drivers/scsi/gdth.c: In function ‘gdth_copy_internal_data’:
drivers/scsi/gdth.c:2362: warning: unused variable ‘sg’ make[2]: *** [drivers/scsi/gdth.o] Error 1
make[1]: *** [drivers/scsi] Error 2
make: *** [drivers] Error 2
[dhaval@gondor linux-2.6.23]$

Looking into the code I notice that gdth_irq_tab is not declared with CONFIG_ISA=y and !CONFIG_EISA.

The values seem to be same in 2.6.23 (I am not sure why it has been put with #ifdefs in -mm) so I have just modified the #ifdef to take care of CONFIG_ISA as well.

(Compile tested only)

Thanks,

Signed-off-by Dhaval Giani <[email protected]>

drivers/scsi/gdth.c +1 -1

Index: linux-2.6.23/drivers/scsi/gdth.c
===================================================================
@@ -288,7 +288,7 @@ static struct timer_list gdth_timer;
 #ifdef CONFIG_ISA
 static unchar   gdth_drq_tab[4] = {5,6,7,7};            /* DRQ table */
 #endif
-#ifdef CONFIG_EISA
+#if defined(CONFIG_EISA) || defined(CONFIG_ISA)
 static unchar   gdth_irq_tab[6] = {0,10,11,12,14,0};    /* IRQ table */
 #endif
 static unchar   gdth_polling;                           /* polling if TRUE */

Signature · 6 lines

regards,
Dhaval
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Laurent Riffard

2007-10-12 20:38 UTC #44 lore raw

In reply to Andrew Morton

Quoted 1 line · Andrew Morton

ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.23/2.6.23-mm1/

Mounting reiser4 fs does hang with these messages in dmesg:

Loading Reiser4. See www.namesys.com for a description of Reiser4. reiser4[swapper(0)]: end_bio_single_page_read (fs/reiser4/page_cache.c:331)[nikita-3332]:
WARNING: Truncated single page read: 4096

Hitting SysRq-W produces this output:

SysRq : Show Blocked State
task PC stack pid father
mount D c20d6b70 1592 2509 2495

         c229bbd8 00000046 c239d684 c20d6b70 e0824b8d c229bc10 00000000 c229bc18 
         c229bbe0 c02ac14e c229bbe8 c0141b7b c229bc04 c02ac344 c0141b45 c1402654 
         c1045f60 c1045f60 c229bc10 c229bc30 c0141d6e 00000002 c1045f60 00000000 
  Call Trace:
   [<c02ac14e>] io_schedule+0xe/0x16
   [<c0141b7b>] sync_page+0x36/0x3a
   [<c02ac344>] __wait_on_bit+0x36/0x5d
   [<c0141d6e>] wait_on_page_bit+0x55/0x5b
   [<e1c0e1a6>] jload_gfp+0x73/0x163 [reiser4]
   [<e1c1c7f8>] load_journal_control_block+0x4d/0x77 [reiser4]
   [<e1c1c86e>] reiser4_init_journal_info+0x2b/0x54 [reiser4]
   [<e1c454e6>] init_format_format40+0x79/0x4ab [reiser4]
   [<e1c21cf8>] fill_super+0xce/0x1ee [reiser4]
   [<c015f731>] get_sb_bdev+0xe0/0x11e
   [<e1c21a8f>] reiser4_get_sb+0x13/0x15 [reiser4]
   [<c015f336>] vfs_kern_mount+0x3b/0x76
   [<c0171621>] do_mount+0x68a/0x7a3
   [<c01717a2>] sys_mount+0x68/0xa4
   [<c0103dee>] sysenter_past_esp+0x5f/0x99
   =======================

.config attached.
Feel free to ask for more info.

~~
laurent

#
# Automatically generated make config: don't edit # Linux kernel version: 2.6.23-mm1
# Fri Oct 12 20:44:24 2007
#
CONFIG_X86_32=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_QUICKLIST=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_USER_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=15
# CONFIG_CGROUPS is not set
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_FAIR_USER_SCHED=y
# CONFIG_FAIR_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_PROC_KPAGEMAP=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"

#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_SMP is not set
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MCORE2 is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
CONFIG_MK7=y
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_XADD=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_USE_3DNOW=y
CONFIG_X86_TSC=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=4
CONFIG_HPET_TIMER=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
CONFIG_X86_UP_APIC=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=m
CONFIG_X86_MCE_P4THERMAL=y
CONFIG_VM86=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
CONFIG_X86_REBOOTFIXUPS=y
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=m
# CONFIG_X86_CPUID is not set

#
# Firmware Drivers
#
CONFIG_EDD=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_3G_OPT is not set
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_2G_OPT is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
# CONFIG_X86_PAE is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_NR_QUICK=1
CONFIG_VIRT_TO_BUS=y
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_EFI is not set
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_KEXEC=y
CONFIG_PHYSICAL_START=0x100000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x100000
# CONFIG_COMPAT_VDSO is not set

#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND_UP_POSSIBLE=y
CONFIG_SUSPEND=y
CONFIG_HIBERNATION_UP_POSSIBLE=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION="/dev/hdb6"
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS is not set
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
CONFIG_ACPI_DEBUG=y
# CONFIG_ACPI_DEBUG_FUNC_TRACE is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_CONTAINER is not set
# CONFIG_APM is not set

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
# CONFIG_CPU_IDLE is not set

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m

#
# Networking
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=m
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_MULTIPLE_TABLES is not set
# CONFIG_IP_ROUTE_MULTIPATH is not set
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
# CONFIG_NF_CONNTRACK_ENABLED is not set
# CONFIG_NF_CONNTRACK is not set
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
# CONFIG_NETFILTER_XT_MATCH_REALM is not set
CONFIG_NETFILTER_XT_MATCH_SCTP=m
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
# CONFIG_NETFILTER_XT_MATCH_TIME is not set
# CONFIG_NETFILTER_XT_MATCH_U32 is not set
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set

#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
# CONFIG_IP_NF_MATCH_ECN is not set
# CONFIG_IP_NF_MATCH_AH is not set
# CONFIG_IP_NF_MATCH_TTL is not set
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
# CONFIG_IP_NF_RAW is not set
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
# CONFIG_IP_NF_ARP_MANGLE is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
# CONFIG_ATM_CLIP_NO_ICMP is not set
# CONFIG_ATM_LANE is not set
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set

#
# QoS and/or fair queueing
#
CONFIG_NET_SCHED=y
CONFIG_NET_SCH_FIFO=y

#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
# CONFIG_NET_SCH_ATM is not set
CONFIG_NET_SCH_PRIO=m
# CONFIG_NET_SCH_RR is not set
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
# CONFIG_NET_SCH_NETEM is not set
CONFIG_NET_SCH_INGRESS=m

#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
# CONFIG_NET_CLS_RSVP6 is not set
# CONFIG_NET_EMATCH is not set
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=y
# CONFIG_NET_ACT_GACT is not set
# CONFIG_NET_ACT_MIRRED is not set
# CONFIG_NET_ACT_IPT is not set
# CONFIG_NET_ACT_NAT is not set
# CONFIG_NET_ACT_PEDIT is not set
# CONFIG_NET_ACT_SIMP is not set
CONFIG_NET_CLS_POLICE=y
# CONFIG_NET_CLS_IND is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set

#
# Wireless
#
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set

#
# Protocols
#
# CONFIG_ISAPNP is not set
# CONFIG_PNPBIOS is not set
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=m
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MISC_DEVICES is not set
# CONFIG_IDE is not set

#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=m
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs #
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set CONFIG_SCSI_WAIT_SCAN=m

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_ATA=m
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ACPI is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CS5535 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
CONFIG_ATA_GENERIC=m
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_LEGACY is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_QDI is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
CONFIG_PATA_VIA=m
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_WINBOND_VLB is not set
CONFIG_PATA_PLATFORM=m
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
# CONFIG_DM_ZERO is not set
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_OHCI=m
# CONFIG_FIREWIRE_SBP2 is not set
CONFIG_IEEE1394=m

#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set

#
# Controllers
#
# CONFIG_IEEE1394_PCILYNX is not set
CONFIG_IEEE1394_OHCI1394=m

#
# Protocols
#
CONFIG_IEEE1394_VIDEO1394=m
# CONFIG_IEEE1394_SBP2 is not set
# CONFIG_IEEE1394_ETH1394_ROM_ENTRY is not set
# CONFIG_IEEE1394_ETH1394 is not set
CONFIG_IEEE1394_DV1394=m
CONFIG_IEEE1394_RAWIO=m
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_IFB is not set
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
# CONFIG_VETH is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_NET_TULIP is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_CS89x0 is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
CONFIG_NE2K_PCI=m
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_NET_POCKET is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set

#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
CONFIG_WLAN_80211=y
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_LIBERTAS is not set
# CONFIG_AIRO is not set
# CONFIG_HERMES is not set
# CONFIG_USB_ATMEL is not set
# CONFIG_ATMEL is not set
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_HOSTAP is not set

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_ATM_DRIVERS is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
# CONFIG_PPP_MPPE is not set
CONFIG_PPPOE=m
CONFIG_PPPOATM=m
# CONFIG_PPPOL2TP is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=m
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_PS2_ALPS is not set
# CONFIG_MOUSE_PS2_LOGIPS2PP is not set
# CONFIG_MOUSE_PS2_SYNAPTICS is not set
# CONFIG_MOUSE_PS2_LIFEBOOK is not set
# CONFIG_MOUSE_PS2_TRACKPOINT is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_MOUSE_VSXXXAA is not set
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GRIP_MP is not set
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
# CONFIG_JOYSTICK_SIDEWINDER is not set
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDJOY is not set
# CONFIG_JOYSTICK_DB9 is not set
# CONFIG_JOYSTICK_GAMECON is not set
# CONFIG_JOYSTICK_TURBOGRAFX is not set
# CONFIG_JOYSTICK_JOYDUMP is not set
# CONFIG_JOYSTICK_XPAD is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=m
# CONFIG_INPUT_WISTRON_BTNS is not set
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
CONFIG_INPUT_UINPUT=m

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
CONFIG_GAMEPORT=m
# CONFIG_GAMEPORT_NS558 is not set
# CONFIG_GAMEPORT_L4 is not set
# CONFIG_GAMEPORT_EMU10K1 is not set
# CONFIG_GAMEPORT_FM801 is not set

#
# Character devices
#
CONFIG_VT=y
# CONFIG_VT_UNICODE is not set
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=m
CONFIG_FIX_EARLYCON_MEM=y
# CONFIG_SERIAL_8250_PCI is not set
CONFIG_SERIAL_8250_PNP=m
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=m
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
CONFIG_RTC=m
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_NSC_GPIO is not set
# CONFIG_CS5535_GPIO is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ALGOPCA=m

#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_ELEKTOR is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_TINY_USB is not set
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set

#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
CONFIG_SENSORS_EEPROM=m
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set

#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_CORETEMP is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
CONFIG_SENSORS_LM80=m
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_THMC50 is not set
CONFIG_SENSORS_VIA686A=m
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
CONFIG_SENSORS_W83781D=m
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_SENSORS_APPLESMC is not set
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
# CONFIG_WATCHDOG is not set

#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set

#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L1=y
CONFIG_VIDEO_V4L1_COMPAT=y
CONFIG_VIDEO_V4L2=y
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
# CONFIG_VIDEO_VIVI is not set
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_PMS is not set
# CONFIG_VIDEO_BWQCAM is not set
# CONFIG_VIDEO_CQCAM is not set
# CONFIG_VIDEO_W9966 is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_CPIA2 is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
# CONFIG_VIDEO_IVTV is not set
# CONFIG_VIDEO_CAFE_CCIC is not set
CONFIG_V4L_USB_DRIVERS=y
# CONFIG_VIDEO_PVRUSB2 is not set
# CONFIG_VIDEO_EM28XX is not set
# CONFIG_VIDEO_USBVISION is not set
# CONFIG_USB_VICAM is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_KONICAWC is not set
# CONFIG_USB_QUICKCAM_MESSENGER is not set
# CONFIG_USB_ET61X251 is not set
# CONFIG_VIDEO_OVCAMCHIP is not set
# CONFIG_USB_W9968CF is not set
# CONFIG_USB_OV511 is not set
# CONFIG_USB_SE401 is not set
# CONFIG_USB_SN9C102 is not set
# CONFIG_USB_STV680 is not set
# CONFIG_USB_ZC0301 is not set
# CONFIG_USB_PWC is not set
# CONFIG_USB_ZR364XX is not set
# CONFIG_USB_STK11XX is not set
# CONFIG_RADIO_ADAPTERS is not set
# CONFIG_DVB_CORE is not set
# CONFIG_DAB is not set

#
# Graphics support
#
CONFIG_AGP=m
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
CONFIG_AGP_VIA=m
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=m
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=m
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_DDC=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_SYS_FOPS is not set
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_VESA=y
# CONFIG_FB_HECUBA is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
CONFIG_FB_RADEON=y
CONFIG_FB_RADEON_I2C=y
# CONFIG_FB_RADEON_BACKLIGHT is not set
# CONFIG_FB_RADEON_DEBUG is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set

#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set CONFIG_VIDEO_SELECT=y
# CONFIG_MDA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set # CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y

#
# Sound
#
CONFIG_SOUND=m

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
# CONFIG_SND_SUPPORT_OLD_API is not set
# CONFIG_SND_VERBOSE_PROCFS is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set

#
# Generic devices
#
CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_MTS64 is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
# CONFIG_SND_PORTMAN2X4 is not set

#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
CONFIG_SND_ENS1371=m
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0

#
# USB devices
#
CONFIG_SND_USB_AUDIO=m
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set

#
# System on Chip audio support
#
# CONFIG_SND_SOC is not set

#
# SoC Audio support for SuperH
#

#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set

#
# USB Input Devices
#
CONFIG_USB_HID=m
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set

#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
CONFIG_USB_DYNAMIC_MINORS=y
CONFIG_USB_SUSPEND=y
# CONFIG_USB_PERSIST is not set
# CONFIG_USB_OTG is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_SPLIT_ISO is not set
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set

#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=m

#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' #

# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_LIBUSUAL is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_MON is not set

#
# USB port drivers
#
# CONFIG_USB_USS720 is not set

#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_GOTEMP is not set

#
# USB DSL modem support
#
CONFIG_USB_ATM=m
# CONFIG_USB_SPEEDTOUCH is not set
# CONFIG_USB_CXACRU is not set
CONFIG_USB_UEAGLEATM=m
# CONFIG_USB_XUSBATM is not set

#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC=y

#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=m
CONFIG_EDAC_AMD76X=m
# CONFIG_EDAC_E7XXX is not set
# CONFIG_EDAC_E752X is not set
# CONFIG_EDAC_I82875P is not set
# CONFIG_EDAC_I82975X is not set
# CONFIG_EDAC_I3000 is not set
# CONFIG_EDAC_I82860 is not set
# CONFIG_EDAC_R82600 is not set
# CONFIG_EDAC_I5000 is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_VIRTUALIZATION is not set

#
# Userspace I/O
#
# CONFIG_UIO is not set

#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
# CONFIG_EXT2_FS_POSIX_ACL is not set
# CONFIG_EXT2_FS_SECURITY is not set
CONFIG_EXT2_FS_XIP=y
CONFIG_FS_XIP=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISER4_FS=m
# CONFIG_REISER4_DEBUG is not set
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
# CONFIG_REISERFS_FS_POSIX_ACL is not set
# CONFIG_REISERFS_FS_SECURITY is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=m
# CONFIG_FUSE_FS is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=850
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set

#
# Layered filesystems
#
CONFIG_ECRYPT_FS=m
# CONFIG_UNION_FS is not set

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_SMB_FS is not set
CONFIG_CIFS=m
CONFIG_CIFS_STATS=y
# CONFIG_CIFS_STATS2 is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
CONFIG_INSTRUMENTATION=y
CONFIG_PROFILING=y
CONFIG_OPROFILE=m
# CONFIG_KPROBES is not set
# CONFIG_MARKERS is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_PAGE_OWNER is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_DETECT_SOFTLOCKUP is not set
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
CONFIG_DEBUG_SLAB=y
CONFIG_DEBUG_SLAB_LEAK=y
CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
CONFIG_LOCKDEP=y
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_LOCKDEP is not set
CONFIG_TRACE_IRQFLAGS=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
CONFIG_FRAME_POINTER=y
# CONFIG_PROFILE_LIKELY is not set
# CONFIG_FORCED_INLINING is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_DEBUG_SYNCHRO_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_WANT_EXTRA_DEBUG_INFORMATION is not set
# CONFIG_UNWIND_INFO is not set
# CONFIG_KGDB is not set
# CONFIG_KGDB_ATTACH_WAIT is not set
# CONFIG_SAMPLES is not set
CONFIG_EARLY_PRINTK=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACK_USAGE=y

#
# Page alloc debug is incompatible with Software Suspend on i386 #
CONFIG_DEBUG_RODATA=y
CONFIG_4KSTACKS=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
CONFIG_DOUBLEFAULT=y

#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_FCRYPT is not set
CONFIG_CRYPTO_BLOWFISH=m
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_586 is not set
# CONFIG_CRYPTO_SERPENT is not set
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_AES_586=m
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
CONFIG_CRYPTO_ARC4=m
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_HW is not set

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_KTIME_SCALAR=y

Andrew Morton

author maintainer

2007-10-12 21:00 UTC #45 lore raw

Quoted 26 lines · On Fri, 12 Oct 2007 22:38:25 +0200 Laurent Riffard <[email protected]>…

Quoted 1 line · Andrew Morton
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.23/2.6.23-mm1/
Mounting reiser4 fs does hang with these messages in dmesg:
Loading Reiser4. See www.namesys.com for a description of Reiser4. reiser4[swapper(0)]: end_bio_single_page_read (fs/reiser4/page_cache.c:331)[nikita-3332]:
WARNING: Truncated single page read: 4096
Hitting SysRq-W produces this output:
SysRq : Show Blocked State
task PC stack pid father
mount D c20d6b70 1592 2509 2495
         c229bbd8 00000046 c239d684 c20d6b70 e0824b8d c229bc10 00000000 c229bc18 
         c229bbe0 c02ac14e c229bbe8 c0141b7b c229bc04 c02ac344 c0141b45 c1402654 
         c1045f60 c1045f60 c229bc10 c229bc30 c0141d6e 00000002 c1045f60 00000000 
  Call Trace:
   [<c02ac14e>] io_schedule+0xe/0x16
   [<c0141b7b>] sync_page+0x36/0x3a
   [<c02ac344>] __wait_on_bit+0x36/0x5d
   [<c0141d6e>] wait_on_page_bit+0x55/0x5b
   [<e1c0e1a6>] jload_gfp+0x73/0x163 [reiser4]
   [<e1c1c7f8>] load_journal_control_block+0x4d/0x77 [reiser4]
   [<e1c1c86e>] reiser4_init_journal_info+0x2b/0x54 [reiser4]
   [<e1c454e6>] init_format_format40+0x79/0x4ab [reiser4]

Quoted 8 lines

   [<e1c21cf8>] fill_super+0xce/0x1ee [reiser4]
   [<c015f731>] get_sb_bdev+0xe0/0x11e
   [<e1c21a8f>] reiser4_get_sb+0x13/0x15 [reiser4]
   [<c015f336>] vfs_kern_mount+0x3b/0x76
   [<c0171621>] do_mount+0x68a/0x7a3
   [<c01717a2>] sys_mount+0x68/0xa4
   [<c0103dee>] sysenter_past_esp+0x5f/0x99
   =======================

ho hum. Maybe reiser4 needs updating for the git-block changes.

I don't recall having seen a useful description of what's going on in git-block so some reverse-engineering might be needed.

Laurent Riffard

2007-10-13 09:29 UTC #46 lore raw

PATCH 1/1 Reiser4: Drop 'size' argument from bio_endio and bi_end_io

Reiser4: Drop 'size' argument from bio_endio and bi_end_io

This patch pushes into Reiser4 the changes introduced by commit 6712ecf8f648118c3363c142196418f89a510b90:

As bi_end_io is only called once when the request is complete, the 'size' argument is now redundant. Remove it.

Now there is no need for bio_endio to subtract the size completed from bi_size. So don't do that either.

While we are at it, change bi_end_io to return void.

Please review.

Signed-off-by Laurent Riffard <[email protected]>

---
 fs/reiser4/flush_queue.c  |   10 ++--------
 fs/reiser4/page_cache.c   |   24 ++++--------------------
 fs/reiser4/status_flags.c |    7 +------
 3 files changed, 7 insertions(+), 34 deletions(-)

fs/reiser4/flush_queue.c +2 -8

Index: linux-2.6-mm/fs/reiser4/flush_queue.c
===================================================================
@@ -391,9 +391,8 @@ int atom_fq_parts_are_clean(txn_atom * a
 }
 #endif
 /* Bio i/o completion routine for reiser4 write operations. */
-static int
-end_io_handler(struct bio *bio, unsigned int bytes_done UNUSED_ARG,
-	       int err)
+static void
+end_io_handler(struct bio *bio, int err)
 {
 	int i;
 	int nr_errors = 0;

@@ -401,10 +400,6 @@ end_io_handler(struct bio *bio, unsigned
 
 	assert("zam-958", bio->bi_rw & WRITE);
 
-	/* i/o op. is not fully completed */
-	if (bio->bi_size != 0)
-		return 1;
-
 	if (err == -EOPNOTSUPP)
 		set_bit(BIO_EOPNOTSUPP, &bio->bi_flags);

@@ -447,7 +442,6 @@ end_io_handler(struct bio *bio, unsigned
 	}
 
 	bio_put(bio);
-	return 0;
 }
 
 /* Count I/O requests which will be submitted by @bio in given flush queues

fs/reiser4/page_cache.c +4 ~~-20~~

Index: linux-2.6-mm/fs/reiser4/page_cache.c
===================================================================
@@ -320,18 +320,11 @@ reiser4_tree *reiser4_tree_by_page(const
    mpage_end_io_read() would also do. But it's static.
 
 */
-static int
-end_bio_single_page_read(struct bio *bio, unsigned int bytes_done UNUSED_ARG,
-			 int err UNUSED_ARG)
+static void
+end_bio_single_page_read(struct bio *bio, int err UNUSED_ARG)
 {
 	struct page *page;
 
-	if (bio->bi_size != 0) {
-		warning("nikita-3332", "Truncated single page read: %i",
-			bio->bi_size);
-		return 1;
-	}
-
 	page = bio->bi_io_vec[0].bv_page;
 
 	if (test_bit(BIO_UPTODATE, &bio->bi_flags)) {

@@ -342,7 +335,6 @@ end_bio_single_page_read(struct bio *bio
 	}
 	unlock_page(page);
 	bio_put(bio);
-	return 0;
 }
 
 /* completion handler for single page bio-based write.

@@ -350,25 +342,17 @@ end_bio_single_page_read(struct bio *bio
    mpage_end_io_write() would also do. But it's static.
 
 */
-static int
-end_bio_single_page_write(struct bio *bio, unsigned int bytes_done UNUSED_ARG,
-			  int err UNUSED_ARG)
+static void
+end_bio_single_page_write(struct bio *bio, int err UNUSED_ARG)
 {
 	struct page *page;
 
-	if (bio->bi_size != 0) {
-		warning("nikita-3333", "Truncated single page write: %i",
-			bio->bi_size);
-		return 1;
-	}
-
 	page = bio->bi_io_vec[0].bv_page;
 
 	if (!test_bit(BIO_UPTODATE, &bio->bi_flags))
 		SetPageError(page);
 	end_page_writeback(page);
 	bio_put(bio);
-	return 0;
 }
 
 /* ->readpage() method for formatted nodes */

fs/reiser4/status_flags.c +1 -6

Index: linux-2.6-mm/fs/reiser4/status_flags.c
===================================================================
@@ -15,12 +15,8 @@
 /* This is our end I/O handler that marks page uptodate if IO was successful. It also
    unconditionally unlocks the page, so we can see that io was done.
    We do not free bio, because we hope to reuse that. */
-static int reiser4_status_endio(struct bio *bio, unsigned int bytes_done,
-				int err)
+static void reiser4_status_endio(struct bio *bio, int err)
 {
-	if (bio->bi_size)
-		return 1;
-
 	if (test_bit(BIO_UPTODATE, &bio->bi_flags)) {
 		SetPageUptodate(bio->bi_io_vec->bv_page);
 	} else {

@@ -28,7 +24,6 @@ static int reiser4_status_endio(struct b
 		SetPageError(bio->bi_io_vec->bv_page);
 	}
 	unlock_page(bio->bi_io_vec->bv_page);
-	return 0;
 }
 
 /* Initialise status code. This is expected to be called from the disk format

Jens Axboe

Acked-by on v1 1/1

2007-10-13 10:10 UTC #47 lore raw

Re: [PATCH] Reiser4: Drop 'size' argument from bio_endio and bi_end_io

Quoted 5 lines · Laurent Riffard

Reiser4: Drop 'size' argument from bio_endio and bi_end_io
This patch pushes into Reiser4 the changes introduced by commit 6712ecf8f648118c3363c142196418f89a510b90:

Quoted 7 lines

As bi_end_io is only called once when the request is complete, the 'size' argument is now redundant. Remove it.
Now there is no need for bio_endio to subtract the size completed from bi_size. So don't do that either.
While we are at it, change bi_end_io to return void.

Looks correct to me.

Acked-by Jens Axboe <[email protected]>

Signature · 1 line

Jens Axboe

Edward Shishkin

2007-10-14 13:09 UTC #48 lore raw

Re: [PATCH] Reiser4: Drop 'size' argument from bio_endio and bi_end_io

In reply to Laurent Riffard

Quoted 7 lines · Laurent Riffard

Reiser4: Drop 'size' argument from bio_endio and bi_end_io
This patch pushes into Reiser4 the changes introduced by commit 6712ecf8f648118c3363c142196418f89a510b90:
As bi_end_io is only called once when the request is complete, the 'size' argument is now redundant. Remove it.

Quoted 8 lines

Now there is no need for bio_endio to subtract the size completed from bi_size. So don't do that either.
While we are at it, change bi_end_io to return void.
Please review.

Thanks!

Signed-off-by Edward Shishkin <[email protected]>

Quoted 139 lines

Signed-off-by Laurent Riffard <[email protected]>

---

fs/reiser4/flush_queue.c  |   10 ++--------
fs/reiser4/page_cache.c   |   24 ++++--------------------
fs/reiser4/status_flags.c |    7 +------
3 files changed, 7 insertions(+), 34 deletions(-)

Index: linux-2.6-mm/fs/reiser4/flush_queue.c
===================================================================

fs/reiser4/flush_queue.c +2 -8

@@ -391,9 +391,8 @@ int atom_fq_parts_are_clean(txn_atom * a
 }
 #endif
 /* Bio i/o completion routine for reiser4 write operations. */
-static int
-end_io_handler(struct bio *bio, unsigned int bytes_done UNUSED_ARG,
-	       int err)
+static void
+end_io_handler(struct bio *bio, int err)
 {
 	int i;
 	int nr_errors = 0;

@@ -401,10 +400,6 @@ end_io_handler(struct bio *bio, unsigned
 
 	assert("zam-958", bio->bi_rw & WRITE);
 
-	/* i/o op. is not fully completed */
-	if (bio->bi_size != 0)
-		return 1;
-
 	if (err == -EOPNOTSUPP)
 		set_bit(BIO_EOPNOTSUPP, &bio->bi_flags);

@@ -447,7 +442,6 @@ end_io_handler(struct bio *bio, unsigned
 	}
 
 	bio_put(bio);
-	return 0;
 }
 
 /* Count I/O requests which will be submitted by @bio in given flush queues

Index: linux-2.6-mm/fs/reiser4/page_cache.c
===================================================================

fs/reiser4/page_cache.c +4 ~~-20~~

@@ -320,18 +320,11 @@ reiser4_tree *reiser4_tree_by_page(const
   mpage_end_io_read() would also do. But it's static.
 
 */
-static int
-end_bio_single_page_read(struct bio *bio, unsigned int bytes_done UNUSED_ARG,
-			 int err UNUSED_ARG)
+static void
+end_bio_single_page_read(struct bio *bio, int err UNUSED_ARG)
 {
 	struct page *page;
 
-	if (bio->bi_size != 0) {
-		warning("nikita-3332", "Truncated single page read: %i",
-			bio->bi_size);
-		return 1;
-	}
-
 	page = bio->bi_io_vec[0].bv_page;
 
 	if (test_bit(BIO_UPTODATE, &bio->bi_flags)) {

@@ -342,7 +335,6 @@ end_bio_single_page_read(struct bio *bio
 	}
 	unlock_page(page);
 	bio_put(bio);
-	return 0;
 }
 
 /* completion handler for single page bio-based write.

@@ -350,25 +342,17 @@ end_bio_single_page_read(struct bio *bio
   mpage_end_io_write() would also do. But it's static.
 
 */
-static int
-end_bio_single_page_write(struct bio *bio, unsigned int bytes_done UNUSED_ARG,
-			  int err UNUSED_ARG)
+static void
+end_bio_single_page_write(struct bio *bio, int err UNUSED_ARG)
 {
 	struct page *page;
 
-	if (bio->bi_size != 0) {
-		warning("nikita-3333", "Truncated single page write: %i",
-			bio->bi_size);
-		return 1;
-	}
-
 	page = bio->bi_io_vec[0].bv_page;
 
 	if (!test_bit(BIO_UPTODATE, &bio->bi_flags))
 		SetPageError(page);
 	end_page_writeback(page);
 	bio_put(bio);
-	return 0;
 }
 
 /* ->readpage() method for formatted nodes */

Index: linux-2.6-mm/fs/reiser4/status_flags.c
===================================================================

fs/reiser4/status_flags.c +1 -7

@@ -15,12 +15,8 @@
 /* This is our end I/O handler that marks page uptodate if IO was successful. It also
   unconditionally unlocks the page, so we can see that io was done.
   We do not free bio, because we hope to reuse that. */
-static int reiser4_status_endio(struct bio *bio, unsigned int bytes_done,
-				int err)
+static void reiser4_status_endio(struct bio *bio, int err)
 {
-	if (bio->bi_size)
-		return 1;
-
 	if (test_bit(BIO_UPTODATE, &bio->bi_flags)) {
 		SetPageUptodate(bio->bi_io_vec->bv_page);
 	} else {

@@ -28,7 +24,6 @@ static int reiser4_status_endio(struct b
 		SetPageError(bio->bi_io_vec->bv_page);
 	}
 	unlock_page(bio->bi_io_vec->bv_page);
-	return 0;
 }
 
 /* Initialise status code. This is expected to be called from the disk format
 
 
-

To unsubscribe from this list: send the line "unsubscribe reiserfs-devel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

Zan Lynx

2007-10-15 16:13 UTC #49 lore raw

In reply to Andrew Morton

Quoted 38 lines · Andrew Morton

Quoted 26 lines · On Fri, 12 Oct 2007 22:38:25 +0200 Laurent Riffard <[email protected]>…
Quoted 1 line · Andrew Morton
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.23/2.6.23-mm1/
Mounting reiser4 fs does hang with these messages in dmesg:
Loading Reiser4. See www.namesys.com for a description of Reiser4. reiser4[swapper(0)]: end_bio_single_page_read (fs/reiser4/page_cache.c:331)[nikita-3332]:
WARNING: Truncated single page read: 4096
Hitting SysRq-W produces this output:
SysRq : Show Blocked State
task PC stack pid father
mount D c20d6b70 1592 2509 2495
         c229bbd8 00000046 c239d684 c20d6b70 e0824b8d c229bc10 00000000 c229bc18 
         c229bbe0 c02ac14e c229bbe8 c0141b7b c229bc04 c02ac344 c0141b45 c1402654 
         c1045f60 c1045f60 c229bc10 c229bc30 c0141d6e 00000002 c1045f60 00000000 
  Call Trace:
   [<c02ac14e>] io_schedule+0xe/0x16
   [<c0141b7b>] sync_page+0x36/0x3a
   [<c02ac344>] __wait_on_bit+0x36/0x5d
   [<c0141d6e>] wait_on_page_bit+0x55/0x5b
   [<e1c0e1a6>] jload_gfp+0x73/0x163 [reiser4]
   [<e1c1c7f8>] load_journal_control_block+0x4d/0x77 [reiser4]
   [<e1c1c86e>] reiser4_init_journal_info+0x2b/0x54 [reiser4]
   [<e1c454e6>] init_format_format40+0x79/0x4ab [reiser4]
Quoted 8 lines
   [<e1c21cf8>] fill_super+0xce/0x1ee [reiser4]
   [<c015f731>] get_sb_bdev+0xe0/0x11e
   [<e1c21a8f>] reiser4_get_sb+0x13/0x15 [reiser4]
   [<c015f336>] vfs_kern_mount+0x3b/0x76
   [<c0171621>] do_mount+0x68a/0x7a3
   [<c01717a2>] sys_mount+0x68/0xa4
   [<c0103dee>] sysenter_past_esp+0x5f/0x99
   =======================

Quoted 4 lines

ho hum. Maybe reiser4 needs updating for the git-block changes.
I don't recall having seen a useful description of what's going on in git-block so some reverse-engineering might be needed.

Hmm. I can add more data to this. My x86_64 mode laptop is running 2.6.23-mm1 with Reiser4 and does not experience problems.

I am using 64-bit kernel, libata (I think, whatever the SCSI-like PATA is called), and Reiser4. Both libata and Reiser4 are built-in, not modules.

Signature · 1 line

Zan Lynx <[email protected]>

Rafael J. Wysocki

2007-10-12 21:18 UTC #50 lore raw

In reply to Andrew Morton

Quoted 9 lines · Andrew Morton

ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.23/2.6.23-mm1/
- I've been largely avoiding applying anything since rc8-mm2 in an attempt to stabilise things for the 2.6.23 merge.
But that didn't stop all the subsystem maintainers from going nuts, with the usual accuracy. We're up to a 37MB diff now, but it seems to be working a bit better.

I get many traces similar to the one below from it (w/ hotfixes):

WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()

Call Trace:
 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
 [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2
 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
 [<ffffffff8024ee6d>] update_target+0x71/0x76
 [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2
 [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382
 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
 [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
 [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
 [<ffffffff8022f18e>] default_wake_function+0x0/0xf
 [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
 [<ffffffff80282e91>] vma_link+0xdd/0x10b
 [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
 [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
 [<ffffffff802a0896>] do_ioctl+0x2a/0x77
 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
 [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
 [<ffffffff8020bfde>] system_call+0x7e/0x83

Full dmesg attached.

Greetings,
Rafael

Linux version 2.6.23-mm1 (rafael@albercik) (gcc version 4.1.2 20061115 (prerelease) (SUSE Linux)) #26 SMP Fri Oct 12 22:59:33 CEST 2007 Command line: root=/dev/sda3 vga=792 resume=/dev/sda1 no_console_suspend
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000077fd0000 (usable)
BIOS-e820: 0000000077fd0000 - 0000000077fe5600 (reserved)
BIOS-e820: 0000000077fe5600 - 0000000077ff8000 (ACPI NVS)
BIOS-e820: 0000000077ff8000 - 0000000080000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec02000 (reserved)
BIOS-e820: 00000000ffbc0000 - 00000000ffcc0000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
Entering add_active_range(0, 0, 159) 0 entries of 256 used
Entering add_active_range(0, 256, 491472) 1 entries of 256 used
end_pfn_map = 1048576
DMI 2.4 present.
ACPI: RSDP 000F7D30, 0024 (r2 HP )
ACPI: XSDT 77FE57B4, 0054 (r1 HP 0944 6070620 HP 1)
ACPI: FACP 77FE5684, 00F4 (r4 HP 0944 3 HP 1)
ACPI: DSDT 77FE58DC, EE7A (r1 HP SB400 10000 MSFT 100000E)
ACPI: FACS 77FF7E80, 0040
ACPI: APIC 77FE5808, 0062 (r1 HP 0944 1 HP 1)
ACPI: MCFG 77FE586C, 003C (r1 HP 0944 1 HP 1)
ACPI: TCPA 77FE58A8, 0032 (r2 HP 0944 1 HP 1)
ACPI: SSDT 77FF4756, 0059 (r1 HP HPQNLP 1 MSFT 100000E)
ACPI: SSDT 77FF47AF, 0206 (r1 HP PSSTBLID 1 HP 1)
Entering add_active_range(0, 0, 159) 0 entries of 256 used
Entering add_active_range(0, 256, 491472) 1 entries of 256 used
No mptable found.
sizeof(struct page) = 56
Zone PFN ranges:
DMA 0 -> 4096
DMA32 4096 -> 1048576
Normal 1048576 -> 1048576
Movable zone start PFN for each node
early_node_map[2] active PFN ranges

    0:        0 ->      159
    0:      256 ->   491472

On node 0 totalpages: 491375
Node 0 memmap at 0xffff810001000000 size 27525120 first pfn 0xffff810001000000
DMA zone: 56 pages used for memmap
DMA zone: 1481 pages reserved
DMA zone: 2462 pages, LIFO batch:0
DMA32 zone: 6663 pages used for memmap
DMA32 zone: 480713 pages, LIFO batch:31
Normal zone: 0 pages used for memmap
Movable zone: 0 pages used for memmap
ATI board detected. Disabling timer routing over 8254.
ACPI: PM-Timer IO Port: 0x8008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
Setting APIC routing to flat
Using ACPI (MADT) for SMP configuration information
swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
SMP: Allowing 2 CPUs, 0 hotplug CPUs
PERCPU: Allocating 46704 bytes of per cpu data
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 483175
Kernel command line: root=/dev/sda3 vga=792 resume=/dev/sda1 no_console_suspend
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Extended CMOS year: 2000
TSC calibrated against PM_TIMER
Marking TSC unstable due to TSCs unsynchronized
time.c: Detected 1995.006 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Checking aperture...
CPU 0: aperture @ 108000000 size 32 MB
Aperture too small (32 MB)
No AGP bridge found
Memory: 1923916k/1965888k available (2285k kernel code, 41360k reserved, 1517k data, 252k init)
Calibrating delay using timer specific routine.. 3994.14 BogoMIPS (lpj=7988280)
Security Framework initialized
Capability LSM initialized
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
SMP alternatives: switching to UP code
ACPI: Core revision 20070126
Parsing all Control Methods:
Table [DSDT](id 0001) - 1153 Objects with 113 Devices 337 Methods 33 Regions
Parsing all Control Methods:
Table [SSDT](id 0002) - 2 Objects with 0 Devices 2 Methods 0 Regions
Parsing all Control Methods:
Table [SSDT](id 0003) - 8 Objects with 0 Devices 0 Methods 0 Regions
tbxface-0598 [00] tb_load_namespace : ACPI Tables successfully acquired
evxfevnt-0091 [00] enable : Transition to ACPI mode successful
..MP-BIOS bug: 8254 timer not connected to IO-APIC
Disabling APIC timer
SMP alternatives: switching to SMP code
Booting processor 1/2 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 3990.29 BogoMIPS (lpj=7980587)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping 02
Brought up 2 CPUs
CPU0 attaching sched-domain:
domain 0: span 00000000,00000000,00000000,00000003
groups: 00000000,00000000,00000000,00000001 00000000,00000000,00000000,00000002
CPU1 attaching sched-domain:
domain 0: span 00000000,00000000,00000000,00000003
groups: 00000000,00000000,00000000,00000002 00000000,00000000,00000000,00000001
net_namespace: 120 bytes
Time: 21:13:03 Date: 10/12/07
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1
evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x15
evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 3 Wake, Enabled 11 Runtime GPEs in this block
ACPI: EC: Look up EC in DSDT
Completing Region/Field/Buffer/Package initialization:................................................................................................................................................................ Initialized 29/33 Regions 0/0 Fields 63/64 Buffers 68/78 Packages (1172 nodes)
Initializing Device/Processor/Thermal objects by executing _INI methods:.......
Executed 7 _INI methods requiring 2 _STA executions (examined 120 objects)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base 3758096384 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG at e0000000 - efffffff
PCI: No mmconfig possible on device 00:18
ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
ACPI: PCI Root Bridge [C074] (0000:00)
PCI: Transparent bridge - 0000:00:14.4
ACPI: PCI Interrupt Routing Table [\_SB_.C074._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C074.C075._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C074.C0DF._PRT]
ACPI: PCI Interrupt Link [C125] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [C126] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [C127] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [C128] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [C129] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [C12A] (IRQs 9) *0, disabled.
ACPI: PCI Interrupt Link [C12B] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [C12C] (IRQs *10 11)
ACPI: Power Resource [C223] (off)
ACPI: Power Resource [C1FE] (off)
ACPI: Power Resource [C217] (on)
ACPI: Power Resource [C34B] (off)
ACPI: Power Resource [C34C] (off)
ACPI: Power Resource [C34D] (off)
ACPI: Power Resource [C34E] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
libata version 3.00 loaded.

PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
PCI: Cannot allocate resource region 0 of device 0000:00:14.2
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default

DMAR:No DMAR devices found
ACPI: RTC can wake from S4
system 00:00: iomem range 0x0-0x9ffff could not be reserved
system 00:00: iomem range 0xe0000-0xfffff could not be reserved
system 00:00: iomem range 0x100000-0x77ffffff could not be reserved
system 00:0a: ioport range 0x40b-0x40b has been reserved
system 00:0a: ioport range 0x4d0-0x4d1 has been reserved
system 00:0a: ioport range 0x4d6-0x4d6 has been reserved
system 00:0a: iomem range 0xffb00000-0xffbfffff could not be reserved
system 00:0a: iomem range 0xfff00000-0xffffffff could not be reserved
system 00:0b: ioport range 0x8000-0x802f has been reserved
system 00:0b: ioport range 0x8100-0x811f has been reserved
system 00:0b: iomem range 0xe0000000-0xefffffff could not be reserved
system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:0c: iomem range 0xcf000-0xcffff has been reserved
system 00:0c: iomem range 0x78000000-0x7fffffff could not be reserved
system 00:0c: iomem range 0xfee00000-0xfee00fff could not be reserved
PCI: Bridge: 0000:00:01.0
IO window: 6000-6fff
MEM window: d4300000-d43fffff
PREFETCH window: c0000000-c7ffffff
PCI: Bridge: 0000:00:04.0
IO window: 4000-5fff
MEM window: d0000000-d3ffffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:05.0
IO window: 2000-3fff
MEM window: cc000000-cfffffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:06.0
IO window: disabled.
MEM window: c8000000-c80fffff
PREFETCH window: disabled.
PCI: Bus 3, cardbus bridge: 0000:02:04.0
IO window: 00001000-000010ff
IO window: 00001400-000014ff
PREFETCH window: 8c000000-8fffffff
MEM window: 90000000-93ffffff
PCI: Bridge: 0000:00:14.4
IO window: disabled.
MEM window: d4000000-d42fffff
PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:04.0 to 64
PCI: Setting latency timer of device 0000:00:05.0 to 64
PCI: Setting latency timer of device 0000:00:06.0 to 64
ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 20 (level, low) -> IRQ 20
NET: Registered protocol family 2
Time: acpi_pm clocksource has been installed.
Clockevents: could not switch to one-shot mode:<6>Clockevents: could not switch to one-shot mode: lapic is not functional. Could not switch to high resolution mode on CPU 1
lapic is not functional.
Could not switch to high resolution mode on CPU 0
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 131072 (order: 9, 3145728 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 5282k freed
audit: initializing netlink socket (disabled)
audit(1192223582.968:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: MSI quirk detected. MSI deactivated.
Boot video device is 0000:01:05.0
PCI: Setting latency timer of device 0000:00:04.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:04.0:pcie00]
Allocate Port Service[0000:00:04.0:pcie01]
Allocate Port Service[0000:00:04.0:pcie03]
PCI: Setting latency timer of device 0000:00:05.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:05.0:pcie00]
Allocate Port Service[0000:00:05.0:pcie01]
Allocate Port Service[0000:00:05.0:pcie03]
PCI: Setting latency timer of device 0000:00:06.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:06.0:pcie00]
Allocate Port Service[0000:00:06.0:pcie01]
Allocate Port Service[0000:00:06.0:pcie03]
AER service couldn't init device 0000:00:04.0:pcie01 - no _OSC support
AER service couldn't init device 0000:00:05.0:pcie01 - no _OSC support
AER service couldn't init device 0000:00:06.0:pcie01 - no _OSC support
vesafb: framebuffer at 0xc0000000, mapped to 0xffffc20010100000, using 4608k, total 16384k
vesafb: mode is 1024x768x24, linelength=3072, pages=6
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.102
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
RAMDISK driver initialized: 16 RAM disks of 128000K size 1024 blocksize
sata_sil 0000:00:12.0: version 2.3
ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 16 (level, low) -> IRQ 16
scsi0 : sata_sil
scsi1 : sata_sil
ata1: SATA max UDMA/100 mmio m512@0xd4409000 tf 0xd4409080 irq 16
ata2: SATA max UDMA/100 mmio m512@0xd4409000 tf 0xd44090c0 irq 16
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-7: FUJITSU MHV2080BH, 892C, max UDMA/100
ata1.00: 156301488 sectors, multi 16: LBA48
ata1.00: configured for UDMA/100
ata2: SATA link down (SStatus 0 SControl 300)
scsi 0:0:0:0: Direct-Access ATA FUJITSU MHV2080B 892C PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
sd 0:0:0:0: [sda] Attached SCSI disk
PNP: PS/2 Controller [PNP0303:C214,PNP0f13:C215] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: PC Speaker as /class/input/input0
input: AT Translated Set 2 keyboard as /class/input/input1
NET: Registered protocol family 1
swsusp: Resume From Partition /dev/sda1
PM: Checking swsusp image.
PM: Resume from disk failed.
registered taskstats version 1
Magic number: 11:322:247
Freeing unused kernel memory: 252k freed
Write protecting the kernel read-only data: 1124k
sd 0:0:0:0: Attached scsi generic sg0 type 0
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ATIIXP: IDE controller (0x1002:0x4376 rev 0x80) at PCI slot 0000:00:14.1
ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16
ATIIXP: not 100% native mode: will probe irqs later

    ide0: BM-DMA at 0x7040-0x7047, BIOS settings: hda:DMA, hdb:pio

ATIIXP: simplex device: DMA disabled
ide1: ATIIXP Bus-Master DMA disabled (BIOS)
Probing IDE interface ide0...
hda: HL-DT-ST DVDRAM GMA-4082N, ATAPI CD/DVD-ROM drive
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: selected mode 0x22
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
swsusp: Marking nosave pages: 000000000009f000 - 0000000000100000
swsusp: Basic memory bitmaps created
swsusp: Basic memory bitmaps freed
Attempting manual resume
swsusp: Resume From Partition 8:1
PM: Checking swsusp image.
PM: Resume from disk failed.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
ieee80211_crypt: registered algorithm 'NULL'
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <[email protected]> Floppy drive(s): fd0 is 1.44M
bcm43xx driver
ACPI: PCI Interrupt 0000:30:00.0[A] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:30:00.0 to 64
bcm43xx: Chip ID 0x4311, rev 0x1
bcm43xx: Number of cores: 4
bcm43xx: Core 0: ID 0x800, rev 0x11, vendor 0x4243
bcm43xx: Core 1: ID 0x812, rev 0xa, vendor 0x4243
bcm43xx: Core 2: ID 0x817, rev 0x3, vendor 0x4243
bcm43xx: Core 3: ID 0x820, rev 0x1, vendor 0x4243
bcm43xx: PHY connected
bcm43xx: Detected PHY: Analog: 4, Type 2, Revision 8
bcm43xx: Detected Radio: ID: 2205017f (Manuf: 17f Ver: 2050 Rev: 2)
bcm43xx: Radio initialized
bcm43xx: Radio initialized
ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
tg3.c:v3.82 (October 5, 2007)
eth0 renamed to eth1
sysfs: duplicate filename 'eth1' can not be created

WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/fs/sysfs/dir.c:416 sysfs_add_one()

Call Trace:
 [<ffffffff802da54e>] sysfs_add_one+0x5c/0xc9
 [<ffffffff802db415>] sysfs_create_link+0xd1/0x12c
 [<ffffffff80382e0a>] device_rename+0x17a/0x1db
 [<ffffffff803d6c9d>] dev_change_name+0x13c/0x234
 [<ffffffff803d6f99>] dev_ifsioc+0x204/0x2d0
 [<ffffffff803d7585>] dev_ioctl+0x520/0x633
 [<ffffffff8027ef6a>] handle_mm_fault+0x1f6/0x6e5
 [<ffffffff8030cb16>] __up_read+0x8f/0x97
 [<ffffffff803c9d4d>] sock_ioctl+0x1fe/0x20c
 [<ffffffff802a0896>] do_ioctl+0x2a/0x77
 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
 [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
 [<ffffffff8020bfde>] system_call+0x7e/0x83

net eth1: device_rename: sysfs_create_symlink failed (-17)
ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 23 (level, low) -> IRQ 23
eth0: Tigon3 [partno(BCM95788A50) rev 3003 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000Base-T Ethernet 00:17:08:2e:2e:f3
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[1]
eth0: dma_rwctrl[763f0000] dma_mask[32-bit]
piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
sdhci: SDHCI controller found at 0000:02:04.3 [104c:803c] (rev 0)
ACPI: PCI Interrupt 0000:02:04.3[A] -> GSI 20 (level, low) -> IRQ 20
mmc0: SDHCI at 0xd4019000 irq 20 PIO
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ACPI: PCI Interrupt 0000:02:04.1[A] -> GSI 20 (level, low) -> IRQ 20
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[d4011000-d40117ff] Max Packet=[2048] IR/IT contexts=[4/8]
ehci_hcd: block sizes: qh 160 qtd 96 itd 192 sitd 96
ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:13.2: EHCI Host Controller /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file 'devices' /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file '001'
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:13.2: reset hcs_params 0x2408 dbg=0 cc=2 pcc=4 ordered !ppc ports=8
ehci_hcd 0000:00:13.2: reset hcc_params a012 thresh 1 uframes 256/512/1024
ehci_hcd 0000:00:13.2: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
ehci_hcd 0000:00:13.2: MWI active
ehci_hcd 0000:00:13.2: irq 19, io mem 0xd4403000
ehci_hcd 0000:00:13.2: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
ehci_hcd 0000:00:13.2: init command 010009 (park)=0 ithresh=1 period=256 RUN
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: default language 0x0409
usb usb1: uevent
usb usb1: usb_probe_device
usb usb1: configuration #1 chosen from 1 choice
usb usb1: adding 1-0:1.0 (config #1, interface 0)
usb 1-0:1.0: uevent
usb 1-0:1.0: uevent
hub 1-0:1.0: usb_probe_interface
hub 1-0:1.0: usb_probe_interface - got id
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
hub 1-0:1.0: standalone hub
hub 1-0:1.0: no power switching (usb 1.0)
hub 1-0:1.0: individual port over-current protection
hub 1-0:1.0: Single TT
hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
hub 1-0:1.0: power on to power good time: 20ms
hub 1-0:1.0: local power source is good
hub 1-0:1.0: trying to enable port power on non-switchable hub
hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, DMA
Uniform CD-ROM driver Revision: 3.20
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd: block sizes: ed 80 td 96
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0000 /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file '001'
usb usb1: new device found, idVendor=0000, idProduct=0000
ehci_hcd 0000:00:13.2: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT
hub 1-0:1.0: port 2, status 0501, change 0001, 480 Mb/s
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.23-mm1 ehci_hcd
usb usb1: SerialNumber: 0000:00:13.2
hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x501
ACPI: PCI Interrupt 0000:02:04.2[A] -> GSI 20 (level, low) -> IRQ 20
Yenta: CardBus bridge found at 0000:02:04.0 [103c:30b0]
ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 19
Yenta: Enabling burst memory read transactions
ohci_hcd 0000:00:13.0: OHCI Host Controller /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file '002'
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:13.0: created debug files
ohci_hcd 0000:00:13.0: irq 19, io mem 0xd4401000
Yenta: Using INTVAL to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:02:04.0, mfunc 0x01a11002, devctl 0x64
ehci_hcd 0000:00:13.2: port 2 full speed --> companion
ehci_hcd 0000:00:13.2: GetStatus port 2 status 003801 POWER OWNER sig=j CONNECT
hub 1-0:1.0: port 2 not reset yet, waiting 50ms
ohci_hcd 0000:00:13.0: OHCI controller state
ohci_hcd 0000:00:13.0: OHCI 1.0, NO legacy support registers
ohci_hcd 0000:00:13.0: control 0x083 HCFS=operational CBSR=3
ohci_hcd 0000:00:13.0: cmdstatus 0x00000 SOC=0
ohci_hcd 0000:00:13.0: intrstatus 0x00000004 SF
ohci_hcd 0000:00:13.0: intrenable 0x8000005a MIE RHSC UE RD WDH
ohci_hcd 0000:00:13.0: hcca frame #0005
ohci_hcd 0000:00:13.0: roothub.a 02000204 POTPGT=2 NPS NDP=4(4)
ohci_hcd 0000:00:13.0: roothub.b 00000000 PPCM=0000 DR=0000
ohci_hcd 0000:00:13.0: roothub.status 00008000 DRWE
ohci_hcd 0000:00:13.0: roothub.portstatus [0] 0x00000100 PPS
ohci_hcd 0000:00:13.0: roothub.portstatus [1] 0x00010100 CSC PPS
ohci_hcd 0000:00:13.0: roothub.portstatus [2] 0x00000100 PPS
ohci_hcd 0000:00:13.0: roothub.portstatus [3] 0x00000100 PPS
usb usb2: default language 0x0409
usb usb2: uevent
usb usb2: usb_probe_device
usb usb2: configuration #1 chosen from 1 choice
ehci_hcd 0000:00:13.2: GetStatus port 2 status 003002 POWER OWNER sig=se0 CSC
ehci_hcd 0000:00:13.2: GetStatus port 3 status 001803 POWER sig=j CSC CONNECT
hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s
usb usb2: adding 2-0:1.0 (config #1, interface 0)
usb 2-0:1.0: uevent
usb 2-0:1.0: uevent
hub 2-0:1.0: usb_probe_interface
hub 2-0:1.0: usb_probe_interface - got id
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
hub 2-0:1.0: standalone hub
hub 2-0:1.0: no power switching (usb 1.0)
hub 2-0:1.0: global over-current protection
hub 2-0:1.0: power on to power good time: 4ms
hub 2-0:1.0: local power source is good
hub 2-0:1.0: no over-current condition exists
hub 2-0:1.0: trying to enable port power on non-switchable hub
rtc_cmos: probe of 00:07 failed with error -16
hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x501
Yenta: ISA IRQ mask 0x0eb8, PCI irq 20
ehci_hcd 0000:00:13.2: port 3 full speed --> companion
ehci_hcd 0000:00:13.2: GetStatus port 3 status 003801 POWER OWNER sig=j CONNECT
hub 1-0:1.0: port 3 not reset yet, waiting 50ms
Socket status: 30000006
/home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file '001'
usb usb2: new device found, idVendor=0000, idProduct=0000
usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.23-mm1 ohci_hcd
usb usb2: SerialNumber: 0000:00:13.0
ehci_hcd 0000:00:13.2: GetStatus port 3 status 003002 POWER OWNER sig=se0 CSC
ehci_hcd 0000:00:13.2: GetStatus port 6 status 001403 POWER sig=k CSC CONNECT
hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
Yenta: Raising subordinate bus# of parent bus (#02) from #03 to #06
hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:13.2: port 6 low speed --> companion
pcmcia: parent PCI bridge Memory window: 0xd4000000 - 0xd42fffff
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 19
ohci_hcd 0000:00:13.1: OHCI Host Controller
ehci_hcd 0000:00:13.2: GetStatus port 6 status 003002 POWER OWNER sig=se0 CSC
hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0040
hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0004
ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [1] = 0x00010101 CSC PPS CCS
hub 2-0:1.0: port 2, status 0101, change 0001, 12 Mb/s /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file '003'
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:13.1: created debug files
ohci_hcd 0000:00:13.1: irq 19, io mem 0xd4402000
hub 2-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101
ohci_hcd 0000:00:13.1: OHCI controller state
ohci_hcd 0000:00:13.1: OHCI 1.0, NO legacy support registers
ohci_hcd 0000:00:13.1: control 0x083 HCFS=operational CBSR=3
ohci_hcd 0000:00:13.1: cmdstatus 0x00000 SOC=0
ohci_hcd 0000:00:13.1: intrstatus 0x00000004 SF
ohci_hcd 0000:00:13.1: intrenable 0x8000005a MIE RHSC UE RD WDH
ohci_hcd 0000:00:13.1: hcca frame #0005
ohci_hcd 0000:00:13.1: roothub.a 02000204 POTPGT=2 NPS NDP=4(4)
ohci_hcd 0000:00:13.1: roothub.b 00000000 PPCM=0000 DR=0000
ohci_hcd 0000:00:13.1: roothub.status 00008000 DRWE
ohci_hcd 0000:00:13.1: roothub.portstatus [0] 0x00010100 CSC PPS
ohci_hcd 0000:00:13.1: roothub.portstatus [1] 0x00000100 PPS
ohci_hcd 0000:00:13.1: roothub.portstatus [2] 0x00010100 CSC PPS
ohci_hcd 0000:00:13.1: roothub.portstatus [3] 0x00000100 PPS
usb usb3: default language 0x0409
usb usb3: uevent
usb usb3: usb_probe_device
usb usb3: configuration #1 chosen from 1 choice
usb usb3: adding 3-0:1.0 (config #1, interface 0)
usb 3-0:1.0: uevent
usb 3-0:1.0: uevent
hub 3-0:1.0: usb_probe_interface
hub 3-0:1.0: usb_probe_interface - got id
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
hub 3-0:1.0: standalone hub
hub 3-0:1.0: no power switching (usb 1.0)
hub 3-0:1.0: global over-current protection
hub 3-0:1.0: power on to power good time: 4ms
hub 3-0:1.0: local power source is good
hub 3-0:1.0: no over-current condition exists
hub 3-0:1.0: trying to enable port power on non-switchable hub
ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f9929613f0c]
usb 2-2: new full speed USB device using ohci_hcd and address 2 /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file '001'
usb usb3: new device found, idVendor=0000, idProduct=0000
usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.23-mm1 ohci_hcd
usb usb3: SerialNumber: 0000:00:13.1
ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS
usb 2-2: skipped 1 descriptor after interface
usb 2-2: default language 0x0409
usb 2-2: uevent
usb 2-2: usb_probe_device
usb 2-2: configuration #1 chosen from 1 choice
usb 2-2: adding 2-2:1.0 (config #1, interface 0)
usb 2-2:1.0: uevent
usb 2-2:1.0: uevent
usb 2-2: adding 2-2:1.1 (config #1, interface 1)
usb 2-2:1.1: uevent
usb 2-2:1.1: uevent
usb 2-2: adding 2-2:1.2 (config #1, interface 2)
usb 2-2:1.2: uevent
usb 2-2:1.2: uevent
usb 2-2: adding 2-2:1.3 (config #1, interface 3)
usb 2-2:1.3: uevent
usb 2-2:1.3: uevent
/home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file '002'
usb 2-2: new device found, idVendor=03f0, idProduct=171d
usb 2-2: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-2: Product: HP Integrated Module
usb 2-2: Manufacturer: Broadcom Corp
floppy0: no floppy controllers found
hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0044
ehci_hcd 0000:00:13.2: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT
hub 1-0:1.0: port 2, status 0501, change 0001, 480 Mb/s
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x501
Bluetooth: HCI USB driver ver 2.9
ehci_hcd 0000:00:13.2: port 2 full speed --> companion
ehci_hcd 0000:00:13.2: GetStatus port 2 status 003801 POWER OWNER sig=j CONNECT
hub 1-0:1.0: port 2 not reset yet, waiting 50ms
ehci_hcd 0000:00:13.2: GetStatus port 2 status 003002 POWER OWNER sig=se0 CSC
ehci_hcd 0000:00:13.2: GetStatus port 6 status 001403 POWER sig=k CSC CONNECT
hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:13.2: port 6 low speed --> companion
ehci_hcd 0000:00:13.2: GetStatus port 6 status 003002 POWER OWNER sig=se0 CSC
hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0004
hub 3-0:1.0: state 7 ports 4 chg 0000 evt 000a
ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [0] = 0x00010101 CSC PPS CCS
hci_usb 2-2:1.0: usb_probe_interface
hci_usb 2-2:1.0: usb_probe_interface - got id
hub 3-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
hci_usb 2-2:1.2: usb_probe_interface
hci_usb 2-2:1.2: usb_probe_interface - got id
hci_usb 2-2:1.3: usb_probe_interface
hci_usb 2-2:1.3: usb_probe_interface - got id
usbcore: registered new interface driver hci_usb
hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
usb 3-1: new full speed USB device using ohci_hcd and address 2
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
Bluetooth: RFCOMM socket layer initialized
usb 3-1: ep0 maxpacket = 8
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
usb 3-1: default language 0x0409
usb 3-1: uevent
usb 3-1: usb_probe_device
usb 3-1: configuration #1 chosen from 1 choice
usb 3-1: adding 3-1:1.0 (config #1, interface 0)
usb 3-1:1.0: uevent
usb 3-1:1.0: uevent
/home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file '002'
usb 3-1: new device found, idVendor=08ff, idProduct=2580
usb 3-1: new device strings: Mfr=0, Product=1, SerialNumber=0
usb 3-1: Product: Fingerprint Sensor
ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [2] = 0x00010301 CSC LSDA PPS CCS
hub 3-0:1.0: port 3, status 0301, change 0001, 1.5 Mb/s
hub 3-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x301
ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [2] = 0x00100303 PRSC LSDA PPS PES CCS
usb 3-3: new low speed USB device using ohci_hcd and address 3
ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [2] = 0x00100303 PRSC LSDA PPS PES CCS
usb 3-3: skipped 1 descriptor after interface
usb 3-3: skipped 1 descriptor after interface
usb 3-3: default language 0x0409
usb 3-3: uevent
usb 3-3: usb_probe_device
usb 3-3: configuration #1 chosen from 1 choice
usb 3-3: adding 3-3:1.0 (config #1, interface 0)
usb 3-3:1.0: uevent
usb 3-3:1.0: uevent
usb 3-3: adding 3-3:1.1 (config #1, interface 1)
usb 3-3:1.1: uevent
usb 3-3:1.1: uevent
/home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file '003'
usb 3-3: new device found, idVendor=046d, idProduct=c521
usb 3-3: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-3: Product: USB Receiver
usb 3-3: Manufacturer: Logitech
hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0040
hub 3-0:1.0: state 7 ports 4 chg 0000 evt 0000
usbcore: registered new interface driver hiddev
usbhid 3-3:1.0: usb_probe_interface
usbhid 3-3:1.0: usb_probe_interface - got id
input: Logitech USB Receiver as /class/input/input2
input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:13.1-3
usbhid 3-3:1.1: usb_probe_interface
usbhid 3-3:1.1: usb_probe_interface - got id
input: Logitech USB Receiver as /class/input/input3 /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/file.c: looking for a minor, starting at 96 input,hiddev96: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:13.1-3
usbcore: registered new interface driver usbhid /home/rafael/src/mm/linux-2.6.23-mm1/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04793/0x300000
serio: Synaptics pass-through port at isa0060/serio4/input0
input: SynPS/2 Synaptics TouchPad as /class/input/input4
device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: [email protected]
hub 1-0:1.0: hub_suspend
usb usb1: bus auto-suspend
ehci_hcd 0000:00:13.2: suspend root hub
loop: module loaded
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Floppy drive(s): fd0 is 1.44M
floppy0: no floppy controllers found
Adding 1052216k swap on /dev/sda1. Priority:-1 extents:1 across:1052216k
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)

ACPI: AC Adapter [C1BD] (on-line)
ACPI: Battery Slot [C1BF] (battery present)
ACPI: Battery Slot [C1BE] (battery absent)
input: Power Button (FF) as /class/input/input5
ACPI: Power Button (FF) [PWRF]
input: Sleep Button (CM) as /class/input/input6
ACPI: Sleep Button (CM) [C25A]
input: Lid Switch as /class/input/input7
ACPI: Lid Switch [C25B]
ACPI: Transitioning device [C34F] to D3
ACPI: Transitioning device [C34F] to D3
ACPI: Fan [C34F] (off)
ACPI: Transitioning device [C350] to D3
ACPI: Transitioning device [C350] to D3
ACPI: Fan [C350] (off)
ACPI: Transitioning device [C351] to D3
ACPI: Transitioning device [C351] to D3
ACPI: Fan [C351] (off)
ACPI: Transitioning device [C352] to D3
ACPI: Transitioning device [C352] to D3
ACPI: Fan [C352] (off)
ACPI: Processor [C000] (supports 8 throttling states)
ACPI: Processor [C001] (supports 8 throttling states)
ACPI: Thermal Zone [TZ1] (62 C)
ACPI: Thermal Zone [TZ2] (52 C)
ACPI: Thermal Zone [TZ3] (32 C)
powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-60 processors (2 cpu cores) (version 2.00.00)
powernow-k8:    0 : fid 0xc (2000 MHz), vid 0x13
powernow-k8:    1 : fid 0xa (1800 MHz), vid 0x15
powernow-k8:    2 : fid 0x8 (1600 MHz), vid 0x17
powernow-k8:    3 : fid 0x0 (800 MHz), vid 0x1e
powernow-k8: ph2 null fid transition 0xc
mtrr: no more MTRRs available
APIC error on CPU1: 00(40)
APIC error on CPU0: 00(40)
WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()

Call Trace:
 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
 [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2
 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
 [<ffffffff8024ee6d>] update_target+0x71/0x76
 [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2
 [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382
 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
 [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
 [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
 [<ffffffff80270cbe>] find_lock_page+0x2a/0xa6
 [<ffffffff80272bce>] filemap_fault+0x1d3/0x35b
 [<ffffffff80270bab>] unlock_page+0x2d/0x31
 [<ffffffff8027d6ec>] __do_fault+0x38e/0x3c4
 [<ffffffff8027ef6a>] handle_mm_fault+0x1f6/0x6e5
 [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
 [<ffffffff8024e56b>] up_read+0x9/0xb
 [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
 [<ffffffff802a0896>] do_ioctl+0x2a/0x77
 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
 [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
 [<ffffffff8020bfde>] system_call+0x7e/0x83

hda-intel: Invalid position buffer, using LPIB read method instead.

WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()

Call Trace:
 [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9
 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
 [<ffffffff8024ee6d>] update_target+0x71/0x76
 [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0
 [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382
 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
 [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
 [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
 [<ffffffff8022f18e>] default_wake_function+0x0/0xf
 [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
 [<ffffffff80282e91>] vma_link+0xdd/0x10b
 [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
 [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
 [<ffffffff802a0896>] do_ioctl+0x2a/0x77
 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
 [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
 [<ffffffff8020bfde>] system_call+0x7e/0x83

WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()

Call Trace:
 [<ffffffff8021b2b2>] smp_call_function_mask+0x6d/0x82
 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
 [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2
 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
 [<ffffffff8024ee6d>] update_target+0x71/0x76
 [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2
 [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382
 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
 [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
 [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
 [<ffffffff8022f18e>] default_wake_function+0x0/0xf
 [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
 [<ffffffff80282e91>] vma_link+0xdd/0x10b
 [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
 [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
 [<ffffffff802a0896>] do_ioctl+0x2a/0x77
 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
 [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
 [<ffffffff8020bfde>] system_call+0x7e/0x83

WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()

Call Trace:
 [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9
 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
 [<ffffffff8024ee6d>] update_target+0x71/0x76
 [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0
 [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382
 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
 [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
 [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
 [<ffffffff8022f18e>] default_wake_function+0x0/0xf
 [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
 [<ffffffff80282e91>] vma_link+0xdd/0x10b
 [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
 [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
 [<ffffffff802a0896>] do_ioctl+0x2a/0x77
 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
 [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
 [<ffffffff8020bfde>] system_call+0x7e/0x83

WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()

Call Trace:
 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
 [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2
 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
 [<ffffffff8024ee6d>] update_target+0x71/0x76
 [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2
 [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382
 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
 [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
 [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
 [<ffffffff8022f18e>] default_wake_function+0x0/0xf
 [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
 [<ffffffff80282e91>] vma_link+0xdd/0x10b
 [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
 [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
 [<ffffffff802a0896>] do_ioctl+0x2a/0x77
 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
 [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
 [<ffffffff8020bfde>] system_call+0x7e/0x83

ACPI: PCI interrupt for device 0000:30:00.0 disabled
bcm43xx driver
ACPI: PCI Interrupt 0000:30:00.0[A] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:30:00.0 to 64
bcm43xx: Chip ID 0x4311, rev 0x1
bcm43xx: Number of cores: 4
bcm43xx: Core 0: ID 0x800, rev 0x11, vendor 0x4243
bcm43xx: Core 1: ID 0x812, rev 0xa, vendor 0x4243
bcm43xx: Core 2: ID 0x817, rev 0x3, vendor 0x4243
bcm43xx: Core 3: ID 0x820, rev 0x1, vendor 0x4243
bcm43xx: PHY connected
bcm43xx: Detected PHY: Analog: 4, Type 2, Revision 8
bcm43xx: Detected Radio: ID: 2205017f (Manuf: 17f Ver: 2050 Rev: 2)
bcm43xx: Radio initialized
bcm43xx: Radio initialized
bcm43xx: PHY connected
bcm43xx: Microcode rev 0x127, pl 0xe (2005-04-18 02:36:27)
bcm43xx: Radio turned on
bcm43xx: Radio enabled by hardware
bcm43xx: Chip initialized
bcm43xx: 32-bit DMA initialized
bcm43xx: Keys cleared
bcm43xx: Selected 802.11 core (phytype 2)
ADDRCONF(NETDEV_UP): eth1: link is not ready
SoftMAC: Scanning finished: scanned 13 channels starting with channel 1
SoftMAC: Associate: Scanning for networks first.
SoftMAC: Scanning finished: scanned 13 channels starting with channel 1
SoftMAC: Queueing Authentication Request to 00:17:9a:f3:b5:75
SoftMAC: Cannot associate without being authenticated, requested authentication
SoftMAC: Sent Authentication Request to 00:17:9a:f3:b5:75.
SoftMAC: Open Authentication completed with 00:17:9a:f3:b5:75
SoftMAC: sent association request!
SoftMAC: associated!
ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
SFW2-OUT-ERROR IN= OUT=eth1 SRC=0000:0000:0000:0000:0000:0000:0000:0000 DST=ff02:0000:0000:0000:0000:0000:0000:0016 LEN=76 TC=0 HOPLIMIT=1 FLOWLBL=0 OPT ( ) PROTO=ICMPv6 TYPE=143 CODE=0
SoftMAC: Getting essid from req_essid
SFW2-OUT-ERROR IN= OUT=eth1 SRC=0000:0000:0000:0000:0000:0000:0000:0000 DST=ff02:0000:0000:0000:0000:0001:ffbe:9531 LEN=64 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=ICMPv6 TYPE=135 CODE=0
NET: Registered protocol family 17
SoftMAC: Getting essid from req_essid
SFW2-OUT-ERROR IN= OUT=eth1 SRC=fe80:0000:0000:0000:0214:a5ff:febe:9531 DST=ff02:0000:0000:0000:0000:0000:0000:0002 LEN=56 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=ICMPv6 TYPE=133 CODE=0
SoftMAC: Getting essid from req_essid
SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:17:9a:f3:b5:75:08:00 SRC=62.121.83.254 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=7883 PROTO=2
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SFW2-OUT-ERROR IN= OUT=eth1 SRC=fe80:0000:0000:0000:0214:a5ff:febe:9531 DST=ff02:0000:0000:0000:0000:0000:0000:0002 LEN=56 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=ICMPv6 TYPE=133 CODE=0
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SFW2-OUT-ERROR IN= OUT=eth1 SRC=fe80:0000:0000:0000:0214:a5ff:febe:9531 DST=ff02:0000:0000:0000:0000:0000:0000:0002 LEN=56 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=ICMPv6 TYPE=133 CODE=0 SFW2-OUT-ERROR IN= OUT=eth1 SRC=fe80:0000:0000:0000:0214:a5ff:febe:9531 DST=ff02:0000:0000:0000:0000:0000:0000:0016 LEN=76 TC=0 HOPLIMIT=1 FLOWLBL=0 OPT ( ) PROTO=ICMPv6 TYPE=143 CODE=0
SoftMAC: Getting essid from req_essid
eth1: no IPv6 routers present
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
bcm43xx: Radio initialized
bcm43xx: DMA-32 0x0200 (RX) max used slots: 1/64
bcm43xx: DMA-32 0x02A0 (TX) max used slots: 0/512
bcm43xx: DMA-32 0x0280 (TX) max used slots: 0/512
bcm43xx: DMA-32 0x0260 (TX) max used slots: 0/512
bcm43xx: DMA-32 0x0240 (TX) max used slots: 0/512
bcm43xx: DMA-32 0x0220 (TX) max used slots: 2/512
bcm43xx: DMA-32 0x0200 (TX) max used slots: 0/512
ACPI: PCI interrupt for device 0000:30:00.0 disabled
Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.00 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
PM: Entering mem sleep
Suspending device vcsa10
Suspending device vcs10
Suspending device vcsa4
Suspending device vcs4
Suspending device vcsa2
Suspending device vcs2
Suspending device vcsa6
Suspending device vcs6
Suspending device vcsa5
Suspending device vcs5
Suspending device vcsa3
Suspending device vcs3
Suspending device vcsa7
Suspending device vcs7
Suspending device audio
Suspending device dsp
Suspending device mixer
Suspending device event7
Suspending device input7
Suspending device event6
Suspending device input6
Suspending device event5
Suspending device input5
Suspending device seq
Suspending device C1BE
Suspending device C1BF
Suspending device C1BD
Suspending device device-mapper
Suspending device serio5
Suspending device event4
Suspending device mouse1
Suspending device input4
Suspending device hiddev0
Suspending device event3
Suspending device input3
Suspending device event2
Suspending device mouse0
Suspending device input2
Suspending device usbdev3.3
Suspending device usbdev3.3_ep82
Suspending device 3-3:1.1
Suspending device usbdev3.3_ep81
Suspending device 3-3:1.0
Suspending device usbdev3.3_ep00
Suspending device 3-3
usb 3-3: usb suspend
Suspending device usbdev3.2
Suspending device usbdev3.2_ep02
Suspending device usbdev3.2_ep81
Suspending device 3-1:1.0
Suspending device usbdev3.2_ep00
Suspending device 3-1
usb 3-1: usb suspend
Suspending device hci0
Suspending device usbdev2.2_ep03
Suspending device usbdev2.2_ep83
Suspending device bluetooth
Suspending device usbdev2.2
Suspending device 2-2:1.3
Suspending device usbdev2.2_ep04
Suspending device usbdev2.2_ep84
Suspending device 2-2:1.2
Suspending device 2-2:1.1
Suspending device usbdev2.2_ep02
Suspending device usbdev2.2_ep82
Suspending device usbdev2.2_ep81
Suspending device 2-2:1.0
Suspending device usbdev2.2_ep00
Suspending device 2-2
usb 2-2: usb suspend
Suspending device usbdev3.1
Suspending device usbdev3.1_ep81
Suspending device 00023f9929613f0c
Suspending device 00023f9929613f0c
Suspending device 3-0:1.0
Suspending device usbdev3.1_ep00
Suspending device usb3
hub 3-0:1.0: hub_suspend
usb usb3: bus suspend
ohci_hcd 0000:00:13.1: suspend root hub
Suspending device pcmcia_socket0
Suspending device usbdev2.1
Suspending device usbdev2.1_ep81
Suspending device 2-0:1.0
Suspending device usbdev2.1_ep00
Suspending device usb2
hub 2-0:1.0: hub_suspend
usb usb2: bus suspend
ohci_hcd 0000:00:13.0: suspend root hub
Suspending device hwmon0
Suspending device usbdev1.1
Suspending device usbdev1.1_ep81
Suspending device 1-0:1.0
Suspending device usbdev1.1_ep00
Suspending device usb1
Suspending device fw-host0
Suspending device fw-host0
Suspending device mmc0
Suspending device i2c-0
Suspending device eth0
Suspending device controlC0
Suspending device hwC0D0
Suspending device hwC0D1
Suspending device pcmC0D0c
Suspending device pcmC0D0p
Suspending device timer
Suspending device vcsa1
Suspending device vcs1
Suspending device 0.0
Suspending device ide0
Suspending device network_throughput
Suspending device network_latency
Suspending device cpu_dma_latency
Suspending device event1
Suspending device event0
Suspending device input1
Suspending device input0
Suspending device psaux
Suspending device mice
Suspending device serio4
Suspending device serio3
Suspending device serio2
Suspending device serio1
Suspending device serio0
Suspending device i8042
Suspending device 0:0:0:0
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
Suspending device target0:0:0
Suspending device host1
Suspending device host0
Suspending device ttyS3
Suspending device ttyS2
Suspending device ttyS1
Suspending device ttyS0
Suspending device serial8250
Suspending device nvram
Suspending device hpet
Suspending device rtc
Suspending device ttysf
Suspending device ttyse
Suspending device ttysd
Suspending device ttysc
Suspending device ttysb
Suspending device ttysa
Suspending device ttys9
Suspending device ttys8
Suspending device ttys7
Suspending device ttys6
Suspending device ttys5
Suspending device ttys4
Suspending device ttys3
Suspending device ttys2
Suspending device ttys1
Suspending device ttys0
Suspending device ttyrf
Suspending device ttyre
Suspending device ttyrd
Suspending device ttyrc
Suspending device ttyrb
Suspending device ttyra
Suspending device ttyr9
Suspending device ttyr8
Suspending device ttyr7
Suspending device ttyr6
Suspending device ttyr5
Suspending device ttyr4
Suspending device ttyr3
Suspending device ttyr2
Suspending device ttyr1
Suspending device ttyr0
Suspending device ttyqf
Suspending device ttyqe
Suspending device ttyqd
Suspending device ttyqc
Suspending device ttyqb
Suspending device ttyqa
Suspending device ttyq9
Suspending device ttyq8
Suspending device ttyq7
Suspending device ttyq6
Suspending device ttyq5
Suspending device ttyq4
Suspending device ttyq3
Suspending device ttyq2
Suspending device ttyq1
Suspending device ttyq0
Suspending device ttypf
Suspending device ttype
Suspending device ttypd
Suspending device ttypc
Suspending device ttypb
Suspending device ttypa
Suspending device ttyp9
Suspending device ttyp8
Suspending device ttyp7
Suspending device ttyp6
Suspending device ttyp5
Suspending device ttyp4
Suspending device ttyp3
Suspending device ttyp2
Suspending device ttyp1
Suspending device ttyp0
Suspending device ptysf
Suspending device ptyse
Suspending device ptysd
Suspending device ptysc
Suspending device ptysb
Suspending device ptysa
Suspending device ptys9
Suspending device ptys8
Suspending device ptys7
Suspending device ptys6
Suspending device ptys5
Suspending device ptys4
Suspending device ptys3
Suspending device ptys2
Suspending device ptys1
Suspending device ptys0
Suspending device ptyrf
Suspending device ptyre
Suspending device ptyrd
Suspending device ptyrc
Suspending device ptyrb
Suspending device ptyra
Suspending device ptyr9
Suspending device ptyr8
Suspending device ptyr7
Suspending device ptyr6
Suspending device ptyr5
Suspending device ptyr4
Suspending device ptyr3
Suspending device ptyr2
Suspending device ptyr1
Suspending device ptyr0
Suspending device ptyqf
Suspending device ptyqe
Suspending device ptyqd
Suspending device ptyqc
Suspending device ptyqb
Suspending device ptyqa
Suspending device ptyq9
Suspending device ptyq8
Suspending device ptyq7
Suspending device ptyq6
Suspending device ptyq5
Suspending device ptyq4
Suspending device ptyq3
Suspending device ptyq2
Suspending device ptyq1
Suspending device ptyq0
Suspending device ptypf
Suspending device ptype
Suspending device ptypd
Suspending device ptypc
Suspending device ptypb
Suspending device ptypa
Suspending device ptyp9
Suspending device ptyp8
Suspending device ptyp7
Suspending device ptyp6
Suspending device ptyp5
Suspending device ptyp4
Suspending device ptyp3
Suspending device ptyp2
Suspending device ptyp1
Suspending device ptyp0
Suspending device tty63
Suspending device tty62
Suspending device tty61
Suspending device tty60
Suspending device tty59
Suspending device tty58
Suspending device tty57
Suspending device tty56
Suspending device tty55
Suspending device tty54
Suspending device tty53
Suspending device tty52
Suspending device tty51
Suspending device tty50
Suspending device tty49
Suspending device tty48
Suspending device tty47
Suspending device tty46
Suspending device tty45
Suspending device tty44
Suspending device tty43
Suspending device tty42
Suspending device tty41
Suspending device tty40
Suspending device tty39
Suspending device tty38
Suspending device tty37
Suspending device tty36
Suspending device tty35
Suspending device tty34
Suspending device tty33
Suspending device tty32
Suspending device tty31
Suspending device tty30
Suspending device tty29
Suspending device tty28
Suspending device tty27
Suspending device tty26
Suspending device tty25
Suspending device tty24
Suspending device tty23
Suspending device tty22
Suspending device tty21
Suspending device tty20
Suspending device tty19
Suspending device tty18
Suspending device tty17
Suspending device tty16
Suspending device tty15
Suspending device tty14
Suspending device tty13
Suspending device tty12
Suspending device tty11
Suspending device tty10
Suspending device tty9
Suspending device tty8
Suspending device tty7
Suspending device tty6
Suspending device tty5
Suspending device tty4
Suspending device tty3
Suspending device tty2
Suspending device tty1
Suspending device vcsa
Suspending device vcs
Suspending device tty0
Suspending device ptmx
Suspending device console
Suspending device tty
Suspending device vtcon1
Suspending device fb0
Suspending device vesafb.0
Suspending device fbcon
Suspending device 0000:00:06.0:pcie03
Suspending device 0000:00:06.0:pcie01
Suspending device 0000:00:06.0:pcie00
Suspending device 0000:00:05.0:pcie03
Suspending device 0000:00:05.0:pcie01
Suspending device 0000:00:05.0:pcie00
Suspending device 0000:00:04.0:pcie03
Suspending device 0000:00:04.0:pcie01
Suspending device 0000:00:04.0:pcie00
Suspending device snapshot
Suspending device pcspkr
Suspending device mcelog
Suspending device lo
Suspending device kmsg
Suspending device urandom
Suspending device random
Suspending device full
Suspending device zero
Suspending device port
Suspending device null
Suspending device kmem
Suspending device mem
Suspending device 00:0c
ACPI handle has no context!
Suspending device 00:0b
Suspending device 00:0a
Suspending device 00:09
Suspending device 00:08
Suspending device 00:07
Suspending device 00:06
Suspending device 00:05
Suspending device 00:04
Suspending device 00:03
Suspending device 00:02
Suspending device 00:01
Suspending device 00:00
Suspending device pnp0
Suspending device 0000:02
Suspending device 0000:03
Suspending device 0000:02:04.3
ACPI handle has no context!
ACPI: PCI interrupt for device 0000:02:04.3 disabled
ACPI handle has no context!
Suspending device 0000:02:04.2
ACPI handle has no context!
ACPI: PCI interrupt for device 0000:02:04.2 disabled
ACPI handle has no context!
Suspending device 0000:02:04.1
ACPI handle has no context!
Suspending device 0000:02:04.0
Suspending device 0000:02:01.0
Suspending device 0000:30
Suspending device 0000:30:00.0
Suspending device 0000:20
Suspending device 0000:10
Suspending device 0000:01
Suspending device 0000:01:05.0
Suspending device 0000:00:18.3
Suspending device 0000:00:18.2
Suspending device 0000:00:18.1
Suspending device 0000:00:18.0
Suspending device 0000:00:14.4
Suspending device 0000:00:14.3
Suspending device 0000:00:14.2
ACPI: PCI interrupt for device 0000:00:14.2 disabled
Suspending device 0000:00:14.1
Suspending device 0000:00:14.0
Suspending device 0000:00:13.2
ACPI: PCI interrupt for device 0000:00:13.2 disabled
ehci_hcd 0000:00:13.2: --> PCI D3
Suspending device 0000:00:13.1
ACPI: PCI interrupt for device 0000:00:13.1 disabled
ohci_hcd 0000:00:13.1: --> PCI D0/legacy
Suspending device 0000:00:13.0
ACPI: PCI interrupt for device 0000:00:13.0 disabled
ohci_hcd 0000:00:13.0: --> PCI D0/legacy
Suspending device 0000:00:12.0
ACPI: PCI interrupt for device 0000:00:12.0 disabled
Suspending device 0000:00:06.0
Suspending device 0000:00:05.0
Suspending device 0000:00:04.0
Suspending device 0000:00:01.0
Suspending device 0000:00:00.0
Suspending device 0000:00
Suspending device pci0000:00
Suspending device LNXTHERM:03
Suspending device LNXTHERM:02
Suspending device LNXTHERM:01
Suspending device PNP0C0B:03
Suspending device PNP0C0B:02
ACPI: Transitioning device [C351] to D0
ACPI: Transitioning device [C351] to D0
Suspending device PNP0C0B:01
ACPI: Transitioning device [C350] to D0
ACPI: Transitioning device [C350] to D0
Suspending device PNP0C0B:00
ACPI: Transitioning device [C34F] to D0
ACPI: Transitioning device [C34F] to D0
Suspending device LNXPOWER:06
Suspending device LNXPOWER:05
Suspending device LNXPOWER:04
Suspending device LNXPOWER:03
Suspending device LNXTHERM:00
Suspending device PNP0C02:02
Suspending device PNP0C14:00
Suspending device PNP0C0D:00
Suspending device PNP0C0E:00
Suspending device ACPI0003:00
Suspending device PNP0C0A:01
Suspending device PNP0C0A:00
Suspending device HPQ0006:00
Suspending device PNP0C02:01
Suspending device device:49
Suspending device device:48
Suspending device device:47
Suspending device device:46
Suspending device device:45
Suspending device device:44
Suspending device device:43
Suspending device device:42
Suspending device device:41
Suspending device device:40
Suspending device device:3f
Suspending device device:3e
Suspending device device:3d
Suspending device device:3c
Suspending device device:3b
Suspending device device:3a
Suspending device device:39
Suspending device device:38
Suspending device device:37
Suspending device device:36
Suspending device device:35
Suspending device device:34
Suspending device device:33
Suspending device PNP0C0F:07
Suspending device PNP0C0F:06
Suspending device PNP0C0F:05
Suspending device PNP0C0F:04
Suspending device PNP0C0F:03
Suspending device PNP0C0F:02
Suspending device PNP0C0F:01
Suspending device PNP0C0F:00
Suspending device device:32
Suspending device device:31
Suspending device device:30
Suspending device device:2f
Suspending device device:2e
Suspending device device:2d
Suspending device device:2c
Suspending device device:2b
Suspending device device:2a
Suspending device device:29
Suspending device device:28
Suspending device device:27
Suspending device device:26
Suspending device device:25
Suspending device device:24
Suspending device device:23
Suspending device device:22
Suspending device device:21
Suspending device device:20
Suspending device device:1f
Suspending device device:1e
Suspending device device:1d
Suspending device device:1c
Suspending device device:1b
Suspending device device:1a
Suspending device device:19
Suspending device device:18
Suspending device device:17
Suspending device device:16
Suspending device device:15
Suspending device device:14
Suspending device device:13
Suspending device device:12
Suspending device device:11
Suspending device device:10
Suspending device PNP0C02:00
Suspending device PNP0000:00
Suspending device LNXPOWER:02
Suspending device SYN0118:00
Suspending device PNP0303:00
Suspending device PNP0B00:00
Suspending device PNP0800:00
Suspending device PNP0200:00
Suspending device PNP0100:00
Suspending device PNP0C04:00
Suspending device IFX0102:00
Suspending device LNXPOWER:01
Suspending device PNP0401:00
Suspending device PNP0A06:00
Suspending device PNP0C09:00
Suspending device device:0f
Suspending device device:0e
Suspending device LNXPOWER:00
Suspending device device:0d
Suspending device device:0c
Suspending device device:0b
Suspending device device:0a
Suspending device device:09
Suspending device device:08
Suspending device device:07
Suspending device device:06
Suspending device device:05
Suspending device device:04
Suspending device device:03
Suspending device device:02
Suspending device LNXVIDEO:00
Suspending device device:01
Suspending device PNP0A03:00
Suspending device PNP0C01:00
Suspending device device:00
Suspending device ACPI0007:01
Suspending device ACPI0007:00
Suspending device LNXPWRBN:00
Suspending device LNXSYSTM:00
Suspending device id
Suspending device vtcon0
Suspending device platform
Disabling non-boot CPUs ...
CPU0 attaching NULL sched-domain.
CPU1 attaching NULL sched-domain.
Cannot set affinity for irq 0
CPU 1 is now offline
SMP alternatives: switching to UP code
CPU0 attaching NULL sched-domain.
CPU1 is down
Extended CMOS year: 2000
hwsleep-0317 [00] enter_sleep_state : Entering sleep state [S3]
Back to C!

WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:427 smp_call_function_single()

Call Trace:
 [<ffffffff8022ecc6>] task_rq_lock+0x3d/0x6f
 [<ffffffff8021b51b>] smp_call_function_single+0x52/0xa0
 [<ffffffff80232f59>] set_cpus_allowed+0xbf/0xcc
 [<ffffffff80214c61>] sc_freq_event+0x71/0x75
 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
 [<ffffffff803c1b1d>] cpufreq_resume+0x131/0x157
 [<ffffffff80383128>] __sysdev_resume+0x34/0x4a
 [<ffffffff8038366e>] sysdev_resume+0x1f/0x61
 [<ffffffff80388050>] device_power_up+0x9/0x10
 [<ffffffff8025bba4>] suspend_devices_and_enter+0xbf/0xf7
 [<ffffffff8025bd3f>] enter_state+0x163/0x1e5
 [<ffffffff8025be65>] state_store+0xa4/0xc2
 [<ffffffff802d98a1>] subsys_attr_store+0x31/0x33
 [<ffffffff802d9ccd>] sysfs_write_file+0xe0/0x11c
 [<ffffffff80294d07>] vfs_write+0xc7/0x150
 [<ffffffff80295288>] sys_write+0x47/0x70
 [<ffffffff8020bfde>] system_call+0x7e/0x83

Extended CMOS year: 2000
Enabling non-boot CPUs ...
CPU0 attaching NULL sched-domain.
SMP alternatives: switching to SMP code
Booting processor 1/2 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 3990.28 BogoMIPS (lpj=7980574)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping 02
Machine check events logged
CPU0 attaching sched-domain:
domain 0: span 00000000,00000000,00000000,00000003
groups: 00000000,00000000,00000000,00000001 00000000,00000000,00000000,00000002
CPU1 attaching sched-domain:
domain 0: span 00000000,00000000,00000000,00000003
groups: 00000000,00000000,00000000,00000002 00000000,00000000,00000000,00000001
CPU1 is up
Clockevents: could not switch to one-shot mode: lapic is not functional.
Could not switch to high resolution mode on CPU 1
ACPI: Transitioning device [C34F] to D3
ACPI: Transitioning device [C34F] to D3
ACPI: Transitioning device [C350] to D3
ACPI: Transitioning device [C350] to D3
ACPI: Transitioning device [C351] to D3
ACPI: Transitioning device [C351] to D3
PM: Writing back config space on device 0000:00:01.0 at offset 7 (was 22206161, writing 2206161)
PM: Writing back config space on device 0000:00:04.0 at offset 9 (was 10001, writing 1fff1)
PM: Writing back config space on device 0000:00:04.0 at offset 8 (was 0, writing d3f0d000)
PM: Writing back config space on device 0000:00:04.0 at offset 7 (was 101, writing 5141)
PM: Writing back config space on device 0000:00:04.0 at offset 3 (was 10000, writing 10010)
PM: Writing back config space on device 0000:00:04.0 at offset 1 (was 100000, writing 100007)
PCI: Setting latency timer of device 0000:00:04.0 to 64
PM: Writing back config space on device 0000:00:05.0 at offset 9 (was 10001, writing 1fff1)
PM: Writing back config space on device 0000:00:05.0 at offset 8 (was 0, writing cff0cc00)
PM: Writing back config space on device 0000:00:05.0 at offset 7 (was 101, writing 3121)
PM: Writing back config space on device 0000:00:05.0 at offset 3 (was 10000, writing 10010)
PM: Writing back config space on device 0000:00:05.0 at offset 1 (was 100000, writing 100007)
PCI: Setting latency timer of device 0000:00:05.0 to 64
PM: Writing back config space on device 0000:00:06.0 at offset 9 (was 10001, writing 1fff1)
PM: Writing back config space on device 0000:00:06.0 at offset 8 (was 0, writing c800c800)
PM: Writing back config space on device 0000:00:06.0 at offset 7 (was 101, writing 1f1)
PM: Writing back config space on device 0000:00:06.0 at offset 3 (was 10000, writing 10010)
PM: Writing back config space on device 0000:00:06.0 at offset 1 (was 100000, writing 100007)
PCI: Setting latency timer of device 0000:00:06.0 to 64
PM: Writing back config space on device 0000:00:12.0 at offset f (was 100, writing 10a)
PM: Writing back config space on device 0000:00:12.0 at offset 3 (was 0, writing 4010)
ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 16 (level, low) -> IRQ 16
ohci_hcd 0000:00:13.0: PCI legacy resume
PCI: Enabling device 0000:00:13.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:13.0 to 64
PM: Writing back config space on device 0000:00:13.0 at offset f (was 100, writing 10b)
PM: Writing back config space on device 0000:00:13.0 at offset 4 (was 0, writing d4401000)
PM: Writing back config space on device 0000:00:13.0 at offset 3 (was 804000, writing 804010)
PM: Writing back config space on device 0000:00:13.0 at offset 1 (was 2b00006, writing 2b00007)
ohci_hcd 0000:00:13.1: PCI legacy resume
PCI: Enabling device 0000:00:13.1 (0000 -> 0002)
ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:13.1 to 64
PM: Writing back config space on device 0000:00:13.1 at offset f (was 100, writing 10b)
PM: Writing back config space on device 0000:00:13.1 at offset 4 (was 0, writing d4402000)
PM: Writing back config space on device 0000:00:13.1 at offset 1 (was 2b00006, writing 2b00007)
ehci_hcd 0000:00:13.2: PCI D0, from previous PCI D3
ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:13.2 to 64
PM: Writing back config space on device 0000:00:13.2 at offset f (was 100, writing 10b)
ehci_hcd 0000:00:13.2: lost power, restarting
usb usb1: root hub lost power or was reset
ehci_hcd 0000:00:13.2: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
ehci_hcd 0000:00:13.2: MWI active
PM: Writing back config space on device 0000:00:14.1 at offset f (was 100, writing 10a)
PM: Writing back config space on device 0000:00:14.1 at offset 8 (was 1, writing 7041)
PM: Writing back config space on device 0000:00:14.1 at offset 3 (was 0, writing 4010)
PM: Writing back config space on device 0000:00:14.1 at offset 1 (was 2300000, writing 2300005)
ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16
PM: Writing back config space on device 0000:00:14.2 at offset f (was 10a, writing a)
PM: Writing back config space on device 0000:00:14.2 at offset 1 (was 4100000, writing 4100002)
ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16
PM: Writing back config space on device 0000:00:14.4 at offset 3 (was 816000, writing 814000)
PM: Writing back config space on device 0000:30:00.0 at offset f (was 100, writing 10a)
PM: Writing back config space on device 0000:30:00.0 at offset 4 (was 0, writing c8000000)
PM: Writing back config space on device 0000:30:00.0 at offset 3 (was 0, writing 10)
PM: Writing back config space on device 0000:30:00.0 at offset 1 (was 100000, writing 100003)
PM: Writing back config space on device 0000:02:01.0 at offset 3 (was 0, writing 4010)
PM: Writing back config space on device 0000:02:01.0 at offset 1 (was 2b00000, writing 2b00006)
PM: Writing back config space on device 0000:02:04.0 at offset f (was 34001ff, writing 5c0010a)
PM: Writing back config space on device 0000:02:04.0 at offset e (was 0, writing 14fc)
PM: Writing back config space on device 0000:02:04.0 at offset d (was 0, writing 1400)
PM: Writing back config space on device 0000:02:04.0 at offset c (was 0, writing 10fc)
PM: Writing back config space on device 0000:02:04.0 at offset b (was 0, writing 1000)
PM: Writing back config space on device 0000:02:04.0 at offset a (was 0, writing 93fff000)
PM: Writing back config space on device 0000:02:04.0 at offset 9 (was 0, writing 90000000)
PM: Writing back config space on device 0000:02:04.0 at offset 8 (was 0, writing 8ffff000)
PM: Writing back config space on device 0000:02:04.0 at offset 7 (was 0, writing 8c000000)
PM: Writing back config space on device 0000:02:04.0 at offset 6 (was 0, writing b0060302)
PM: Writing back config space on device 0000:02:04.0 at offset 4 (was 0, writing d4010000)
PM: Writing back config space on device 0000:02:04.0 at offset 3 (was 820000, writing 82a810)
PM: Writing back config space on device 0000:02:04.0 at offset 1 (was 2100000, writing 2100007)
PM: Writing back config space on device 0000:02:04.1 at offset f (was 4020100, writing 402010a)
PM: Writing back config space on device 0000:02:04.1 at offset 5 (was 0, writing d4014000)
PM: Writing back config space on device 0000:02:04.1 at offset 4 (was 0, writing d4011000)
PM: Writing back config space on device 0000:02:04.1 at offset 3 (was 800000, writing 804010)
PM: Writing back config space on device 0000:02:04.1 at offset 1 (was 2100000, writing 2100006)
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[d4011000-d40117ff] Max Packet=[2048] IR/IT contexts=[4/8]
PM: Writing back config space on device 0000:02:04.2 at offset f (was 40701ff, writing 407010a)
PM: Writing back config space on device 0000:02:04.2 at offset 4 (was 0, writing d4018000)
PM: Writing back config space on device 0000:02:04.2 at offset 3 (was 800000, writing 804010)
PM: Writing back config space on device 0000:02:04.2 at offset 1 (was 2100000, writing 2100006)
ACPI: PCI Interrupt 0000:02:04.2[A] -> GSI 20 (level, low) -> IRQ 20
PM: Writing back config space on device 0000:02:04.3 at offset f (was 40701ff, writing 407010a)
PM: Writing back config space on device 0000:02:04.3 at offset 4 (was 0, writing d4019000)
PM: Writing back config space on device 0000:02:04.3 at offset 3 (was 800000, writing 804010)
PM: Writing back config space on device 0000:02:04.3 at offset 1 (was 2100000, writing 2100006)
ACPI: PCI Interrupt 0000:02:04.3[A] -> GSI 20 (level, low) -> IRQ 20
sd 0:0:0:0: [sda] Starting disk
ata2: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: configured for UDMA/100
sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: selected mode 0x22
usb usb1: usb resume
ehci_hcd 0000:00:13.2: resume root hub after power loss
hub 1-0:1.0: trying to enable port power on non-switchable hub
usb usb2: usb resume
ohci_hcd 0000:00:13.0: lost power
ohci_hcd 0000:00:13.0: OHCI controller state
ohci_hcd 0000:00:13.0: OHCI 1.0, NO legacy support registers
ohci_hcd 0000:00:13.0: control 0x083 HCFS=operational CBSR=3
ohci_hcd 0000:00:13.0: cmdstatus 0x00000 SOC=0
ohci_hcd 0000:00:13.0: intrstatus 0x00000004 SF
ohci_hcd 0000:00:13.0: intrenable 0x8000005a MIE RHSC UE RD WDH
ohci_hcd 0000:00:13.0: hcca frame #0005
ohci_hcd 0000:00:13.0: roothub.a 02000204 POTPGT=2 NPS NDP=4(4)
ohci_hcd 0000:00:13.0: roothub.b 00000000 PPCM=0000 DR=0000
ohci_hcd 0000:00:13.0: roothub.status 00008000 DRWE
ohci_hcd 0000:00:13.0: roothub.portstatus [0] 0x00000100 PPS
ohci_hcd 0000:00:13.0: roothub.portstatus [1] 0x00000100 PPS
ohci_hcd 0000:00:13.0: roothub.portstatus [2] 0x00000100 PPS
ohci_hcd 0000:00:13.0: roothub.portstatus [3] 0x00000100 PPS
ohci_hcd 0000:00:13.0: restart complete
usb usb2: root hub lost power or was reset
hub 2-0:1.0: trying to enable port power on non-switchable hub
hub 2-0:1.0: logical disconnect on port 2
usb usb3: usb resume
ohci_hcd 0000:00:13.1: lost power
ohci_hcd 0000:00:13.1: OHCI controller state
ohci_hcd 0000:00:13.1: OHCI 1.0, NO legacy support registers
ohci_hcd 0000:00:13.1: control 0x083 HCFS=operational CBSR=3
ohci_hcd 0000:00:13.1: cmdstatus 0x00000 SOC=0
ohci_hcd 0000:00:13.1: intrstatus 0x00000004 SF
ohci_hcd 0000:00:13.1: intrenable 0x8000005a MIE RHSC UE RD WDH
ohci_hcd 0000:00:13.1: hcca frame #000b
ohci_hcd 0000:00:13.1: roothub.a 02000204 POTPGT=2 NPS NDP=4(4)
ohci_hcd 0000:00:13.1: roothub.b 00000000 PPCM=0000 DR=0000
ohci_hcd 0000:00:13.1: roothub.status 00008000 DRWE
ohci_hcd 0000:00:13.1: roothub.portstatus [0] 0x00000100 PPS
ohci_hcd 0000:00:13.1: roothub.portstatus [1] 0x00000100 PPS
ohci_hcd 0000:00:13.1: roothub.portstatus [2] 0x00000100 PPS
ohci_hcd 0000:00:13.1: roothub.portstatus [3] 0x00000100 PPS
ohci_hcd 0000:00:13.1: restart complete
usb usb3: root hub lost power or was reset
hub 3-0:1.0: trying to enable port power on non-switchable hub
hub 3-0:1.0: logical disconnect on port 1
hub 3-0:1.0: logical disconnect on port 3
PM: Finishing wakeup.
Restarting tasks ... done.
hub 1-0:1.0: state 7 ports 8 chg 0000 evt 004c
ehci_hcd 0000:00:13.2: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT
hub 1-0:1.0: port 2, status 0501, change 0001, 480 Mb/s
hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:13.2: port 2 full speed --> companion
ehci_hcd 0000:00:13.2: GetStatus port 2 status 003801 POWER OWNER sig=j CONNECT
hub 1-0:1.0: port 2 not reset yet, waiting 50ms
ehci_hcd 0000:00:13.2: GetStatus port 2 status 003002 POWER OWNER sig=se0 CSC
ehci_hcd 0000:00:13.2: GetStatus port 3 status 001803 POWER sig=j CSC CONNECT
hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s
hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:13.2: port 3 full speed --> companion
ehci_hcd 0000:00:13.2: GetStatus port 3 status 003801 POWER OWNER sig=j CONNECT
hub 1-0:1.0: port 3 not reset yet, waiting 50ms
ehci_hcd 0000:00:13.2: GetStatus port 3 status 003002 POWER OWNER sig=se0 CSC
ehci_hcd 0000:00:13.2: GetStatus port 6 status 001403 POWER sig=k CSC CONNECT
hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:13.2: port 6 low speed --> companion
ehci_hcd 0000:00:13.2: GetStatus port 6 status 003002 POWER OWNER sig=se0 CSC
hub 2-0:1.0: state 7 ports 4 chg 0004 evt 0004
ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [1] = 0x00010101 CSC PPS CCS
hub 2-0:1.0: port 2, status 0101, change 0001, 12 Mb/s
usb 2-2: USB disconnect, address 2
usb 2-2: unregistering device
usb 2-2: usb_disable_device nuking all URBs
usb 2-2: unregistering interface 2-2:1.0
usb 2-2:1.0: uevent
usb 2-2:1.0: uevent
usb 2-2: unregistering interface 2-2:1.1
usb 2-2:1.1: uevent
usb 2-2:1.1: uevent
usb 2-2: unregistering interface 2-2:1.2
usb 2-2:1.2: uevent
usb 2-2:1.2: uevent
usb 2-2: unregistering interface 2-2:1.3
usb 2-2:1.3: uevent
usb 2-2:1.3: uevent
usb 2-2: uevent
hub 2-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101
ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS
usb 2-2: new full speed USB device using ohci_hcd and address 3
ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS
usb 2-2: skipped 1 descriptor after interface
usb 2-2: default language 0x0409
usb 2-2: uevent
usb 2-2: usb_probe_device
usb 2-2: configuration #1 chosen from 1 choice
usb 2-2: adding 2-2:1.0 (config #1, interface 0)
usb 2-2:1.0: uevent
usb 2-2:1.0: uevent
hci_usb 2-2:1.0: usb_probe_interface
hci_usb 2-2:1.0: usb_probe_interface - got id
usb 2-2: adding 2-2:1.1 (config #1, interface 1)
usb 2-2:1.1: uevent
usb 2-2:1.1: uevent
usb 2-2: adding 2-2:1.2 (config #1, interface 2)
usb 2-2:1.2: uevent
usb 2-2:1.2: uevent
hci_usb 2-2:1.2: usb_probe_interface
hci_usb 2-2:1.2: usb_probe_interface - got id
usb 2-2: adding 2-2:1.3 (config #1, interface 3)
usb 2-2:1.3: uevent
usb 2-2:1.3: uevent
hci_usb 2-2:1.3: usb_probe_interface
hci_usb 2-2:1.3: usb_probe_interface - got id
/home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file '003'
usb 2-2: new device found, idVendor=03f0, idProduct=171d
usb 2-2: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-2: Product: HP Integrated Module
usb 2-2: Manufacturer: Broadcom Corp
hub 3-0:1.0: state 7 ports 4 chg 000a evt 000a
ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [0] = 0x00010101 CSC PPS CCS
hub 3-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
usb 3-1: USB disconnect, address 2
usb 3-1: unregistering device
usb 3-1: usb_disable_device nuking all URBs
usb 3-1: unregistering interface 3-1:1.0
usb 3-1:1.0: uevent
usb 3-1:1.0: uevent
usb 3-1: uevent
hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
usb 3-1: new full speed USB device using ohci_hcd and address 4
ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
usb 3-1: ep0 maxpacket = 8
usb 3-1: default language 0x0409
usb 3-1: uevent
usb 3-1: usb_probe_device
usb 3-1: configuration #1 chosen from 1 choice
usb 3-1: adding 3-1:1.0 (config #1, interface 0)
usb 3-1:1.0: uevent
usb 3-1:1.0: uevent
/home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file '004'
usb 3-1: new device found, idVendor=08ff, idProduct=2580
usb 3-1: new device strings: Mfr=0, Product=1, SerialNumber=0
usb 3-1: Product: Fingerprint Sensor
ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [2] = 0x00010301 CSC LSDA PPS CCS
hub 3-0:1.0: port 3, status 0301, change 0001, 1.5 Mb/s
usb 3-3: USB disconnect, address 3
usb 3-3: unregistering device
usb 3-3: usb_disable_device nuking all URBs
usb 3-3: unregistering interface 3-3:1.0
usb 3-3:1.0: uevent
usb 3-3:1.0: uevent
usb 3-3: unregistering interface 3-3:1.1
/home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/file.c: removing 96 minor
usb 3-3:1.1: uevent
usb 3-3:1.1: uevent
usb 3-3: uevent
hub 3-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x301
ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [2] = 0x00100303 PRSC LSDA PPS PES CCS
usb 3-3: new low speed USB device using ohci_hcd and address 5
ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [2] = 0x00100303 PRSC LSDA PPS PES CCS
usb 3-3: skipped 1 descriptor after interface
usb 3-3: skipped 1 descriptor after interface
usb 3-3: default language 0x0409
usb 3-3: uevent
usb 3-3: usb_probe_device
usb 3-3: configuration #1 chosen from 1 choice
usb 3-3: adding 3-3:1.0 (config #1, interface 0)
usb 3-3:1.0: uevent
usb 3-3:1.0: uevent
usbhid 3-3:1.0: usb_probe_interface
usbhid 3-3:1.0: usb_probe_interface - got id
input: Logitech USB Receiver as /class/input/input8
input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:13.1-3
usb 3-3: adding 3-3:1.1 (config #1, interface 1)
usb 3-3:1.1: uevent
usb 3-3:1.1: uevent
usbhid 3-3:1.1: usb_probe_interface
usbhid 3-3:1.1: usb_probe_interface - got id
input: Logitech USB Receiver as /class/input/input9
/home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/file.c: looking for a minor, starting at 96
input,hiddev96: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:13.1-3
/home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file '005'
usb 3-3: new device found, idVendor=046d, idProduct=c521
usb 3-3: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-3: Product: USB Receiver
usb 3-3: Manufacturer: Logitech
hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0040
hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0004
hub 3-0:1.0: state 7 ports 4 chg 0000 evt 0008
hub 1-0:1.0: hub_suspend
usb usb1: bus auto-suspend
ehci_hcd 0000:00:13.2: suspend root hub
bcm43xx driver
ACPI: PCI Interrupt 0000:30:00.0[A] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:30:00.0 to 64
bcm43xx: Chip ID 0x4311, rev 0x1
bcm43xx: Number of cores: 4
bcm43xx: Core 0: ID 0x800, rev 0x11, vendor 0x4243
bcm43xx: Core 1: ID 0x812, rev 0xa, vendor 0x4243
bcm43xx: Core 2: ID 0x817, rev 0x3, vendor 0x4243
bcm43xx: Core 3: ID 0x820, rev 0x1, vendor 0x4243
bcm43xx: PHY connected
bcm43xx: Detected PHY: Analog: 4, Type 2, Revision 8
bcm43xx: Detected Radio: ID: 2205017f (Manuf: 17f Ver: 2050 Rev: 2)
bcm43xx: Radio initialized
bcm43xx: Radio initialized
bcm43xx: PHY connected
bcm43xx: Microcode rev 0x127, pl 0xe (2005-04-18 02:36:27)
bcm43xx: Radio turned on
bcm43xx: Radio enabled by hardware
bcm43xx: Chip initialized
bcm43xx: 32-bit DMA initialized
bcm43xx: Keys cleared
bcm43xx: Selected 802.11 core (phytype 2)
ADDRCONF(NETDEV_UP): eth1: link is not ready
SoftMAC: Scanning finished: scanned 13 channels starting with channel 1
SoftMAC: Associate: Scanning for networks first.
SoftMAC: Scanning finished: scanned 13 channels starting with channel 1
SoftMAC: Queueing Authentication Request to 00:17:9a:f3:b5:75
SoftMAC: Cannot associate without being authenticated, requested authentication
SoftMAC: Sent Authentication Request to 00:17:9a:f3:b5:75.
SoftMAC: Open Authentication completed with 00:17:9a:f3:b5:75
SoftMAC: sent association request!
SoftMAC: associated!
ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
SFW2-OUT-ERROR IN= OUT=eth1 SRC=0000:0000:0000:0000:0000:0000:0000:0000 DST=ff02:0000:0000:0000:0000:0000:0000:0016 LEN=76 TC=0 HOPLIMIT=1 FLOWLBL=0 OPT ( ) PROTO=ICMPv6 TYPE=143 CODE=0
SoftMAC: Getting essid from req_essid
SFW2-OUT-ERROR IN= OUT=eth1 SRC=0000:0000:0000:0000:0000:0000:0000:0000 DST=ff02:0000:0000:0000:0000:0001:ffbe:9531 LEN=64 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=ICMPv6 TYPE=135 CODE=0
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SFW2-OUT-ERROR IN= OUT=eth1 SRC=fe80:0000:0000:0000:0214:a5ff:febe:9531 DST=ff02:0000:0000:0000:0000:0000:0000:0002 LEN=56 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=ICMPv6 TYPE=133 CODE=0
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SFW2-OUT-ERROR IN= OUT=eth1 SRC=fe80:0000:0000:0000:0214:a5ff:febe:9531 DST=ff02:0000:0000:0000:0000:0000:0000:0002 LEN=56 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=ICMPv6 TYPE=133 CODE=0
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SFW2-OUT-ERROR IN= OUT=eth1 SRC=fe80:0000:0000:0000:0214:a5ff:febe:9531 DST=ff02:0000:0000:0000:0000:0000:0000:0016 LEN=76 TC=0 HOPLIMIT=1 FLOWLBL=0 OPT ( ) PROTO=ICMPv6 TYPE=143 CODE=0
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SFW2-OUT-ERROR IN= OUT=eth1 SRC=fe80:0000:0000:0000:0214:a5ff:febe:9531 DST=ff02:0000:0000:0000:0000:0000:0000:0002 LEN=56 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=ICMPv6 TYPE=133 CODE=0
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
eth1: no IPv6 routers present

WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()

Call Trace:
 [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9
 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
 [<ffffffff8024ee6d>] update_target+0x71/0x76
 [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0
 [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382
 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
 [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
 [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
 [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
 [<ffffffff80282e91>] vma_link+0xdd/0x10b
 [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
 [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
 [<ffffffff802a0896>] do_ioctl+0x2a/0x77
 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
 [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
 [<ffffffff8020bfde>] system_call+0x7e/0x83

WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()

Call Trace:
 [<ffffffff8021b2b2>] smp_call_function_mask+0x6d/0x82
 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
 [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2
 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
 [<ffffffff8024ee6d>] update_target+0x71/0x76
 [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2
 [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382
 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
 [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
 [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
 [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
 [<ffffffff80282e91>] vma_link+0xdd/0x10b
 [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
 [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
 [<ffffffff802a0896>] do_ioctl+0x2a/0x77
 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
 [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
 [<ffffffff8020bfde>] system_call+0x7e/0x83

SoftMAC: Getting essid from req_essid

WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()

Call Trace:
 [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9
 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
 [<ffffffff8024ee6d>] update_target+0x71/0x76
 [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0
 [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382
 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
 [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
 [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
 [<ffffffff8022f18e>] default_wake_function+0x0/0xf
 [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
 [<ffffffff80282e91>] vma_link+0xdd/0x10b
 [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
 [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
 [<ffffffff802a0896>] do_ioctl+0x2a/0x77
 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
 [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
 [<ffffffff8020bfde>] system_call+0x7e/0x83

WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()

Call Trace:
 [<ffffffff8021b2b2>] smp_call_function_mask+0x6d/0x82
 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
 [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2
 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
 [<ffffffff8024ee6d>] update_target+0x71/0x76
 [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2
 [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382
 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
 [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
 [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
 [<ffffffff8022f18e>] default_wake_function+0x0/0xf
 [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
 [<ffffffff80282e91>] vma_link+0xdd/0x10b
 [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
 [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
 [<ffffffff802a0896>] do_ioctl+0x2a/0x77
 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
 [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
 [<ffffffff8020bfde>] system_call+0x7e/0x83

WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()

Call Trace:
 [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9
 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
 [<ffffffff8024ee6d>] update_target+0x71/0x76
 [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0
 [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382
 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
 [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
 [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
 [<ffffffff8022f18e>] default_wake_function+0x0/0xf
 [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
 [<ffffffff80282e91>] vma_link+0xdd/0x10b
 [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
 [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
 [<ffffffff802a0896>] do_ioctl+0x2a/0x77
 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
 [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
 [<ffffffff8020bfde>] system_call+0x7e/0x83

WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()

Call Trace:
 [<ffffffff8021b2b2>] smp_call_function_mask+0x6d/0x82
 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
 [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2
 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
 [<ffffffff8024ee6d>] update_target+0x71/0x76
 [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2
 [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382
 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
 [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
 [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
 [<ffffffff8022f18e>] default_wake_function+0x0/0xf
 [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
 [<ffffffff80282e91>] vma_link+0xdd/0x10b
 [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
 [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
 [<ffffffff802a0896>] do_ioctl+0x2a/0x77
 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
 [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
 [<ffffffff8020bfde>] system_call+0x7e/0x83

SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid

WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()

Call Trace:
 [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9
 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
 [<ffffffff8024ee6d>] update_target+0x71/0x76
 [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0
 [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382
 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
 [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
 [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
 [<ffffffff8022f18e>] default_wake_function+0x0/0xf
 [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
 [<ffffffff80282e91>] vma_link+0xdd/0x10b
 [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
 [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
 [<ffffffff802a0896>] do_ioctl+0x2a/0x77
 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
 [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
 [<ffffffff8020bfde>] system_call+0x7e/0x83

WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()

Call Trace:
 [<ffffffff8021b2b2>] smp_call_function_mask+0x6d/0x82
 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
 [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2
 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
 [<ffffffff8024ee6d>] update_target+0x71/0x76
 [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2
 [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382
 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
 [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
 [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
 [<ffffffff8022f18e>] default_wake_function+0x0/0xf
 [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
 [<ffffffff80282e91>] vma_link+0xdd/0x10b
 [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
 [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
 [<ffffffff802a0896>] do_ioctl+0x2a/0x77
 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
 [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
 [<ffffffff8020bfde>] system_call+0x7e/0x83

SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
bcm43xx: Radio initialized
bcm43xx: DMA-32 0x0200 (RX) max used slots: 1/64
bcm43xx: DMA-32 0x02A0 (TX) max used slots: 0/512
bcm43xx: DMA-32 0x0280 (TX) max used slots: 0/512
bcm43xx: DMA-32 0x0260 (TX) max used slots: 0/512
bcm43xx: DMA-32 0x0240 (TX) max used slots: 0/512
bcm43xx: DMA-32 0x0220 (TX) max used slots: 2/512
bcm43xx: DMA-32 0x0200 (TX) max used slots: 0/512
ACPI: PCI interrupt for device 0000:30:00.0 disabled
swsusp: Marking nosave pages: 000000000009f000 - 0000000000100000
swsusp: Basic memory bitmaps created
Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.00 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.19 seconds) done.
Shrinking memory... -\done (15072 pages freed)
Freed 60288 kbytes in 0.22 seconds (274.03 MB/s)
Suspending device vcsa8
Suspending device vcs8
Suspending device vcsa10
Suspending device vcs10
Suspending device usbdev3.5
Suspending device usbdev3.5_ep82
Suspending device hiddev0
Suspending device event3
Suspending device input9
Suspending device 3-3:1.1
Suspending device usbdev3.5_ep81
Suspending device event2
Suspending device mouse0
Suspending device input8
Suspending device 3-3:1.0
Suspending device usbdev3.5_ep00
Suspending device 3-3
Suspending device usbdev3.4
Suspending device usbdev3.4_ep02
Suspending device usbdev3.4_ep81
Suspending device 3-1:1.0
Suspending device usbdev3.4_ep00
Suspending device 3-1
Suspending device usbdev2.3
Suspending device 2-2:1.3
Suspending device usbdev2.3_ep04
Suspending device usbdev2.3_ep84
Suspending device 2-2:1.2
Suspending device usbdev2.3_ep03
Suspending device usbdev2.3_ep83
Suspending device 2-2:1.1
Suspending device usbdev2.3_ep02
Suspending device usbdev2.3_ep82
Suspending device usbdev2.3_ep81
Suspending device hci0
Suspending device 2-2:1.0
Suspending device usbdev2.3_ep00
Suspending device 2-2
Suspending device vcsa4
Suspending device vcs4
Suspending device vcsa2
Suspending device vcs2
Suspending device vcsa6
Suspending device vcs6
Suspending device vcsa5
Suspending device vcs5
Suspending device vcsa3
Suspending device vcs3
Suspending device vcsa7
Suspending device vcs7
Suspending device audio
Suspending device dsp
Suspending device mixer
Suspending device event7
Suspending device input7
Suspending device event6
Suspending device input6
Suspending device event5
Suspending device input5
Suspending device seq
Suspending device C1BE
Suspending device C1BF
Suspending device C1BD
Suspending device device-mapper
Suspending device serio5
Suspending device event4
Suspending device mouse1
Suspending device input4
Suspending device bluetooth
Suspending device usbdev3.1
Suspending device usbdev3.1_ep81
Suspending device 00023f9929613f0c
Suspending device 00023f9929613f0c
Suspending device 3-0:1.0
Suspending device usbdev3.1_ep00
Suspending device usb3
hub 3-0:1.0: hub_suspend
usb usb3: bus suspend
ohci_hcd 0000:00:13.1: suspend root hub
Suspending device pcmcia_socket0
Suspending device usbdev2.1
Suspending device usbdev2.1_ep81
Suspending device 2-0:1.0
Suspending device usbdev2.1_ep00
Suspending device usb2
hub 2-0:1.0: hub_suspend
usb usb2: bus suspend
ohci_hcd 0000:00:13.0: suspend root hub
Suspending device hwmon0
Suspending device usbdev1.1
Suspending device usbdev1.1_ep81
Suspending device 1-0:1.0
Suspending device usbdev1.1_ep00
Suspending device usb1
Suspending device fw-host0
Suspending device fw-host0
Suspending device mmc0
Suspending device i2c-0
Suspending device eth0
Suspending device controlC0
Suspending device hwC0D0
Suspending device hwC0D1
Suspending device pcmC0D0c
Suspending device pcmC0D0p
Suspending device timer
Suspending device vcsa1
Suspending device vcs1
Suspending device 0.0
Suspending device ide0
Suspending device network_throughput
Suspending device network_latency
Suspending device cpu_dma_latency
Suspending device event1
Suspending device event0
Suspending device input1
Suspending device input0
Suspending device psaux
Suspending device mice
Suspending device serio4
Suspending device serio3
Suspending device serio2
Suspending device serio1
Suspending device serio0
Suspending device i8042
Suspending device 0:0:0:0
sd 0:0:0:0: [sda] Synchronizing SCSI cache
Suspending device target0:0:0
Suspending device host1
Suspending device host0
Suspending device ttyS3
Suspending device ttyS2
Suspending device ttyS1
Suspending device ttyS0
Suspending device serial8250
Suspending device nvram
Suspending device hpet
Suspending device rtc
Suspending device ttysf
Suspending device ttyse
Suspending device ttysd
Suspending device ttysc
Suspending device ttysb
Suspending device ttysa
Suspending device ttys9
Suspending device ttys8
Suspending device ttys7
Suspending device ttys6
Suspending device ttys5
Suspending device ttys4
Suspending device ttys3
Suspending device ttys2
Suspending device ttys1
Suspending device ttys0
Suspending device ttyrf
Suspending device ttyre
Suspending device ttyrd
Suspending device ttyrc
Suspending device ttyrb
Suspending device ttyra
Suspending device ttyr9
Suspending device ttyr8
Suspending device ttyr7
Suspending device ttyr6
Suspending device ttyr5
Suspending device ttyr4
Suspending device ttyr3
Suspending device ttyr2
Suspending device ttyr1
Suspending device ttyr0
Suspending device ttyqf
Suspending device ttyqe
Suspending device ttyqd
Suspending device ttyqc
Suspending device ttyqb
Suspending device ttyqa
Suspending device ttyq9
Suspending device ttyq8
Suspending device ttyq7
Suspending device ttyq6
Suspending device ttyq5
Suspending device ttyq4
Suspending device ttyq3
Suspending device ttyq2
Suspending device ttyq1
Suspending device ttyq0
Suspending device ttypf
Suspending device ttype
Suspending device ttypd
Suspending device ttypc
Suspending device ttypb
Suspending device ttypa
Suspending device ttyp9
Suspending device ttyp8
Suspending device ttyp7
Suspending device ttyp6
Suspending device ttyp5
Suspending device ttyp4
Suspending device ttyp3
Suspending device ttyp2
Suspending device ttyp1
Suspending device ttyp0
Suspending device ptysf
Suspending device ptyse
Suspending device ptysd
Suspending device ptysc
Suspending device ptysb
Suspending device ptysa
Suspending device ptys9
Suspending device ptys8
Suspending device ptys7
Suspending device ptys6
Suspending device ptys5
Suspending device ptys4
Suspending device ptys3
Suspending device ptys2
Suspending device ptys1
Suspending device ptys0
Suspending device ptyrf
Suspending device ptyre
Suspending device ptyrd
Suspending device ptyrc
Suspending device ptyrb
Suspending device ptyra
Suspending device ptyr9
Suspending device ptyr8
Suspending device ptyr7
Suspending device ptyr6
Suspending device ptyr5
Suspending device ptyr4
Suspending device ptyr3
Suspending device ptyr2
Suspending device ptyr1
Suspending device ptyr0
Suspending device ptyqf
Suspending device ptyqe
Suspending device ptyqd
Suspending device ptyqc
Suspending device ptyqb
Suspending device ptyqa
Suspending device ptyq9
Suspending device ptyq8
Suspending device ptyq7
Suspending device ptyq6
Suspending device ptyq5
Suspending device ptyq4
Suspending device ptyq3
Suspending device ptyq2
Suspending device ptyq1
Suspending device ptyq0
Suspending device ptypf
Suspending device ptype
Suspending device ptypd
Suspending device ptypc
Suspending device ptypb
Suspending device ptypa
Suspending device ptyp9
Suspending device ptyp8
Suspending device ptyp7
Suspending device ptyp6
Suspending device ptyp5
Suspending device ptyp4
Suspending device ptyp3
Suspending device ptyp2
Suspending device ptyp1
Suspending device ptyp0
Suspending device tty63
Suspending device tty62
Suspending device tty61
Suspending device tty60
Suspending device tty59
Suspending device tty58
Suspending device tty57
Suspending device tty56
Suspending device tty55
Suspending device tty54
Suspending device tty53
Suspending device tty52
Suspending device tty51
Suspending device tty50
Suspending device tty49
Suspending device tty48
Suspending device tty47
Suspending device tty46
Suspending device tty45
Suspending device tty44
Suspending device tty43
Suspending device tty42
Suspending device tty41
Suspending device tty40
Suspending device tty39
Suspending device tty38
Suspending device tty37
Suspending device tty36
Suspending device tty35
Suspending device tty34
Suspending device tty33
Suspending device tty32
Suspending device tty31
Suspending device tty30
Suspending device tty29
Suspending device tty28
Suspending device tty27
Suspending device tty26
Suspending device tty25
Suspending device tty24
Suspending device tty23
Suspending device tty22
Suspending device tty21
Suspending device tty20
Suspending device tty19
Suspending device tty18
Suspending device tty17
Suspending device tty16
Suspending device tty15
Suspending device tty14
Suspending device tty13
Suspending device tty12
Suspending device tty11
Suspending device tty10
Suspending device tty9
Suspending device tty8
Suspending device tty7
Suspending device tty6
Suspending device tty5
Suspending device tty4
Suspending device tty3
Suspending device tty2
Suspending device tty1
Suspending device vcsa
Suspending device vcs
Suspending device tty0
Suspending device ptmx
Suspending device console
Suspending device tty
Suspending device vtcon1
Suspending device fb0
Suspending device vesafb.0
Suspending device fbcon
Suspending device 0000:00:06.0:pcie03
Suspending device 0000:00:06.0:pcie01
Suspending device 0000:00:06.0:pcie00
Suspending device 0000:00:05.0:pcie03
Suspending device 0000:00:05.0:pcie01
Suspending device 0000:00:05.0:pcie00
Suspending device 0000:00:04.0:pcie03
Suspending device 0000:00:04.0:pcie01
Suspending device 0000:00:04.0:pcie00
Suspending device snapshot
Suspending device pcspkr
Suspending device mcelog
Suspending device lo
Suspending device kmsg
Suspending device urandom
Suspending device random
Suspending device full
Suspending device zero
Suspending device port
Suspending device null
Suspending device kmem
Suspending device mem
Suspending device 00:0c
ACPI handle has no context!
Suspending device 00:0b
Suspending device 00:0a
Suspending device 00:09
Suspending device 00:08
Suspending device 00:07
Suspending device 00:06
Suspending device 00:05
Suspending device 00:04
Suspending device 00:03
Suspending device 00:02
Suspending device 00:01
Suspending device 00:00
Suspending device pnp0
Suspending device 0000:02
Suspending device 0000:03
Suspending device 0000:02:04.3
ACPI handle has no context!
ACPI: PCI interrupt for device 0000:02:04.3 disabled
ACPI handle has no context!
Suspending device 0000:02:04.2
ACPI handle has no context!
ACPI: PCI interrupt for device 0000:02:04.2 disabled
ACPI handle has no context!
Suspending device 0000:02:04.1
ACPI handle has no context!
Suspending device 0000:02:04.0
Suspending device 0000:02:01.0
Suspending device 0000:30
Suspending device 0000:30:00.0
Suspending device 0000:20
Suspending device 0000:10
Suspending device 0000:01
Suspending device 0000:01:05.0
Suspending device 0000:00:18.3
Suspending device 0000:00:18.2
Suspending device 0000:00:18.1
Suspending device 0000:00:18.0
Suspending device 0000:00:14.4
Suspending device 0000:00:14.3
Suspending device 0000:00:14.2
ACPI: PCI interrupt for device 0000:00:14.2 disabled
Suspending device 0000:00:14.1
Suspending device 0000:00:14.0
Suspending device 0000:00:13.2
ACPI: PCI interrupt for device 0000:00:13.2 disabled
ehci_hcd 0000:00:13.2: --> PCI D3
Suspending device 0000:00:13.1
ACPI: PCI interrupt for device 0000:00:13.1 disabled
ohci_hcd 0000:00:13.1: --> PCI D0/legacy
Suspending device 0000:00:13.0
ACPI: PCI interrupt for device 0000:00:13.0 disabled
ohci_hcd 0000:00:13.0: --> PCI D0/legacy
Suspending device 0000:00:12.0
ACPI: PCI interrupt for device 0000:00:12.0 disabled
Suspending device 0000:00:06.0
Suspending device 0000:00:05.0
Suspending device 0000:00:04.0
Suspending device 0000:00:01.0
Suspending device 0000:00:00.0
Suspending device 0000:00
Suspending device pci0000:00
Suspending device LNXTHERM:03
Suspending device LNXTHERM:02
Suspending device LNXTHERM:01
Suspending device PNP0C0B:03
Suspending device PNP0C0B:02
ACPI: Transitioning device [C351] to D0
ACPI: Transitioning device [C351] to D0
Suspending device PNP0C0B:01
ACPI: Transitioning device [C350] to D0
ACPI: Transitioning device [C350] to D0
Suspending device PNP0C0B:00
ACPI: Transitioning device [C34F] to D0
ACPI: Transitioning device [C34F] to D0
Suspending device LNXPOWER:06
Suspending device LNXPOWER:05
Suspending device LNXPOWER:04
Suspending device LNXPOWER:03
Suspending device LNXTHERM:00
Suspending device PNP0C02:02
Suspending device PNP0C14:00
Suspending device PNP0C0D:00
Suspending device PNP0C0E:00
Suspending device ACPI0003:00
Suspending device PNP0C0A:01
Suspending device PNP0C0A:00
Suspending device HPQ0006:00
Suspending device PNP0C02:01
Suspending device device:49
Suspending device device:48
Suspending device device:47
Suspending device device:46
Suspending device device:45
Suspending device device:44
Suspending device device:43
Suspending device device:42
Suspending device device:41
Suspending device device:40
Suspending device device:3f
Suspending device device:3e
Suspending device device:3d
Suspending device device:3c
Suspending device device:3b
Suspending device device:3a
Suspending device device:39
Suspending device device:38
Suspending device device:37
Suspending device device:36
Suspending device device:35
Suspending device device:34
Suspending device device:33
Suspending device PNP0C0F:07
Suspending device PNP0C0F:06
Suspending device PNP0C0F:05
Suspending device PNP0C0F:04
Suspending device PNP0C0F:03
Suspending device PNP0C0F:02
Suspending device PNP0C0F:01
Suspending device PNP0C0F:00
Suspending device device:32
Suspending device device:31
Suspending device device:30
Suspending device device:2f
Suspending device device:2e
Suspending device device:2d
Suspending device device:2c
Suspending device device:2b
Suspending device device:2a
Suspending device device:29
Suspending device device:28
Suspending device device:27
Suspending device device:26
Suspending device device:25
Suspending device device:24
Suspending device device:23
Suspending device device:22
Suspending device device:21
Suspending device device:20
Suspending device device:1f
Suspending device device:1e
Suspending device device:1d
Suspending device device:1c
Suspending device device:1b
Suspending device device:1a
Suspending device device:19
Suspending device device:18
Suspending device device:17
Suspending device device:16
Suspending device device:15
Suspending device device:14
Suspending device device:13
Suspending device device:12
Suspending device device:11
Suspending device device:10
Suspending device PNP0C02:00
Suspending device PNP0000:00
Suspending device LNXPOWER:02
Suspending device SYN0118:00
Suspending device PNP0303:00
Suspending device PNP0B00:00
Suspending device PNP0800:00
Suspending device PNP0200:00
Suspending device PNP0100:00
Suspending device PNP0C04:00
Suspending device IFX0102:00
Suspending device LNXPOWER:01
Suspending device PNP0401:00
Suspending device PNP0A06:00
Suspending device PNP0C09:00
Suspending device device:0f
Suspending device device:0e
Suspending device LNXPOWER:00
Suspending device device:0d
Suspending device device:0c
Suspending device device:0b
Suspending device device:0a
Suspending device device:09
Suspending device device:08
Suspending device device:07
Suspending device device:06
Suspending device device:05
Suspending device device:04
Suspending device device:03
Suspending device device:02
Suspending device LNXVIDEO:00
Suspending device device:01
Suspending device PNP0A03:00
Suspending device PNP0C01:00
Suspending device device:00
Suspending device ACPI0007:01
Suspending device ACPI0007:00
Suspending device LNXPWRBN:00
Suspending device LNXSYSTM:00
Suspending device id
Suspending device vtcon0
Suspending device platform
Disabling non-boot CPUs ...
CPU0 attaching NULL sched-domain.
CPU1 attaching NULL sched-domain.
CPU 1 is now offline
SMP alternatives: switching to UP code
CPU0 attaching NULL sched-domain.
CPU1 is down
Extended CMOS year: 2000
swsusp: critical section:
swsusp: Need to copy 149622 pages
swsusp: Normal pages needed: 149622 + 1024 + 36, available pages: 341743
evxfevnt-0079 [00] enable : System is already in ACPI mode
Extended CMOS year: 2000
Enabling non-boot CPUs ...
CPU0 attaching NULL sched-domain.
SMP alternatives: switching to SMP code
Booting processor 1/2 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 3990.20 BogoMIPS (lpj=7980408)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping 02
Clockevents: could not switch to one-shot mode: lapic is not functional.
CPU0 attaching sched-domain:
Could not switch to high resolution mode on CPU 1
domain 0: span 00000000,00000000,00000000,00000003
groups: 00000000,00000000,00000000,00000001 00000000,00000000,00000000,00000002
CPU1 attaching sched-domain:
domain 0: span 00000000,00000000,00000000,00000003
groups: 00000000,00000000,00000000,00000002 00000000,00000000,00000000,00000001
CPU1 is up
ACPI: Transitioning device [C34F] to D3
ACPI: Transitioning device [C34F] to D3
ACPI: Transitioning device [C350] to D3
ACPI: Transitioning device [C350] to D3
PM: Writing back config space on device 0000:00:01.0 at offset 7 (was 2206161, writing 22206161)
PCI: Setting latency timer of device 0000:00:04.0 to 64
PCI: Setting latency timer of device 0000:00:05.0 to 64
PCI: Setting latency timer of device 0000:00:06.0 to 64
PM: Writing back config space on device 0000:00:12.0 at offset 1 (was 2b00003, writing 2b00007)
ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 16 (level, low) -> IRQ 16
ohci_hcd 0000:00:13.0: PCI legacy resume
ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 19
ohci_hcd 0000:00:13.1: PCI legacy resume
ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:13.2: PCI D0, from previous PCI D3
ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 19
PM: Writing back config space on device 0000:00:13.2 at offset 1 (was 2b00007, writing 2b00017)
ehci_hcd 0000:00:13.2: lost power, restarting
usb usb1: root hub lost power or was reset
ehci_hcd 0000:00:13.2: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
ehci_hcd 0000:00:13.2: MWI active
ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16
PM: Writing back config space on device 0000:00:14.2 at offset f (was 10a, writing a)
PM: Writing back config space on device 0000:00:14.2 at offset 1 (was 4100006, writing 4100002)
ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16
PM: Writing back config space on device 0000:00:14.4 at offset 6 (was 40030200, writing 40060200)
PM: Writing back config space on device 0000:30:00.0 at offset 1 (was 100007, writing 100003)
PM: Writing back config space on device 0000:02:04.0 at offset f (was 3c4010a, writing 5c0010a)
PM: Writing back config space on device 0000:02:04.0 at offset 3 (was 824010, writing 82a810)
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[d4011000-d40117ff] Max Packet=[2048] IR/IT contexts=[4/8]
ACPI: PCI Interrupt 0000:02:04.2[A] -> GSI 20 (level, low) -> IRQ 20
ACPI: PCI Interrupt 0000:02:04.3[A] -> GSI 20 (level, low) -> IRQ 20
sd 0:0:0:0: [sda] Starting disk
ata2: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: configured for UDMA/100
sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: selected mode 0x22
usb usb1: usb resume
ehci_hcd 0000:00:13.2: resume root hub after power loss
hub 1-0:1.0: trying to enable port power on non-switchable hub
usb usb2: usb resume
ohci_hcd 0000:00:13.0: BIOS/SMM active, control 008
ohci_hcd 0000:00:13.0: OHCI controller state
ohci_hcd 0000:00:13.0: OHCI 1.0, NO legacy support registers
ohci_hcd 0000:00:13.0: control 0x083 HCFS=operational CBSR=3
ohci_hcd 0000:00:13.0: cmdstatus 0x00000 SOC=0
ohci_hcd 0000:00:13.0: intrstatus 0x00000004 SF
ohci_hcd 0000:00:13.0: intrenable 0x8000005a MIE RHSC UE RD WDH
ohci_hcd 0000:00:13.0: hcca frame #0005
ohci_hcd 0000:00:13.0: roothub.a 02000204 POTPGT=2 NPS NDP=4(4)
ohci_hcd 0000:00:13.0: roothub.b 00000000 PPCM=0000 DR=0000
ohci_hcd 0000:00:13.0: roothub.status 00008000 DRWE
ohci_hcd 0000:00:13.0: roothub.portstatus [0] 0x00000100 PPS
ohci_hcd 0000:00:13.0: roothub.portstatus [1] 0x00010100 CSC PPS
ohci_hcd 0000:00:13.0: roothub.portstatus [2] 0x00000100 PPS
ohci_hcd 0000:00:13.0: roothub.portstatus [3] 0x00000100 PPS
ohci_hcd 0000:00:13.0: restart complete
usb usb2: root hub lost power or was reset
hub 2-0:1.0: trying to enable port power on non-switchable hub
hub 2-0:1.0: logical disconnect on port 2
usb usb3: usb resume
ohci_hcd 0000:00:13.1: BIOS/SMM active, control 008
ohci_hcd 0000:00:13.1: OHCI controller state
ohci_hcd 0000:00:13.1: OHCI 1.0, NO legacy support registers
ohci_hcd 0000:00:13.1: control 0x083 HCFS=operational CBSR=3
ohci_hcd 0000:00:13.1: cmdstatus 0x00000 SOC=0
ohci_hcd 0000:00:13.1: intrstatus 0x00000004 SF
ohci_hcd 0000:00:13.1: intrenable 0x8000005a MIE RHSC UE RD WDH
ohci_hcd 0000:00:13.1: hcca frame #0005
ohci_hcd 0000:00:13.1: roothub.a 02000204 POTPGT=2 NPS NDP=4(4)
ohci_hcd 0000:00:13.1: roothub.b 00000000 PPCM=0000 DR=0000
ohci_hcd 0000:00:13.1: roothub.status 00008000 DRWE
ohci_hcd 0000:00:13.1: roothub.portstatus [0] 0x00010100 CSC PPS
ohci_hcd 0000:00:13.1: roothub.portstatus [1] 0x00000100 PPS
ohci_hcd 0000:00:13.1: roothub.portstatus [2] 0x00010100 CSC PPS
ohci_hcd 0000:00:13.1: roothub.portstatus [3] 0x00000100 PPS
ohci_hcd 0000:00:13.1: restart complete
usb usb3: root hub lost power or was reset
hub 3-0:1.0: trying to enable port power on non-switchable hub
hub 3-0:1.0: logical disconnect on port 1
hub 3-0:1.0: logical disconnect on port 3
Restarting tasks ... <7>hub 1-0:1.0: state 7 ports 8 chg 0000 evt 004c
ehci_hcd 0000:00:13.2: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT
hub 1-0:1.0: port 2, status 0501, change 0001, 480 Mb/s
done.
swsusp: Basic memory bitmaps freed
hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:13.2: port 2 full speed --> companion
ehci_hcd 0000:00:13.2: GetStatus port 2 status 003801 POWER OWNER sig=j CONNECT
hub 1-0:1.0: port 2 not reset yet, waiting 50ms
ehci_hcd 0000:00:13.2: GetStatus port 2 status 003002 POWER OWNER sig=se0 CSC
ehci_hcd 0000:00:13.2: GetStatus port 3 status 001803 POWER sig=j CSC CONNECT
hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s
hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:13.2: port 3 full speed --> companion
ehci_hcd 0000:00:13.2: GetStatus port 3 status 003801 POWER OWNER sig=j CONNECT
hub 1-0:1.0: port 3 not reset yet, waiting 50ms
ehci_hcd 0000:00:13.2: GetStatus port 3 status 003002 POWER OWNER sig=se0 CSC
ehci_hcd 0000:00:13.2: GetStatus port 6 status 001403 POWER sig=k CSC CONNECT
hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:13.2: port 6 low speed --> companion
ehci_hcd 0000:00:13.2: GetStatus port 6 status 003002 POWER OWNER sig=se0 CSC
hub 2-0:1.0: state 7 ports 4 chg 0004 evt 0004
ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [1] = 0x00010101 CSC PPS CCS
hub 2-0:1.0: port 2, status 0101, change 0001, 12 Mb/s
usb 2-2: USB disconnect, address 3
usb 2-2: unregistering device
usb 2-2: usb_disable_device nuking all URBs
usb 2-2: unregistering interface 2-2:1.0
usb 2-2:1.0: uevent
usb 2-2:1.0: uevent
usb 2-2: unregistering interface 2-2:1.1
usb 2-2:1.1: uevent
usb 2-2:1.1: uevent
usb 2-2: unregistering interface 2-2:1.2
usb 2-2:1.2: uevent
usb 2-2:1.2: uevent
usb 2-2: unregistering interface 2-2:1.3
usb 2-2:1.3: uevent
usb 2-2:1.3: uevent
usb 2-2: uevent
hub 2-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101
ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS
usb 2-2: new full speed USB device using ohci_hcd and address 4
ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS
usb 2-2: skipped 1 descriptor after interface
usb 2-2: default language 0x0409
usb 2-2: uevent
usb 2-2: usb_probe_device
usb 2-2: configuration #1 chosen from 1 choice
usb 2-2: adding 2-2:1.0 (config #1, interface 0)
usb 2-2:1.0: uevent
usb 2-2:1.0: uevent
hci_usb 2-2:1.0: usb_probe_interface
hci_usb 2-2:1.0: usb_probe_interface - got id
usb 2-2: adding 2-2:1.1 (config #1, interface 1)
usb 2-2:1.1: uevent
usb 2-2:1.1: uevent
usb 2-2: adding 2-2:1.2 (config #1, interface 2)
usb 2-2:1.2: uevent
usb 2-2:1.2: uevent
hci_usb 2-2:1.2: usb_probe_interface
hci_usb 2-2:1.2: usb_probe_interface - got id
usb 2-2: adding 2-2:1.3 (config #1, interface 3)
usb 2-2:1.3: uevent
usb 2-2:1.3: uevent
hci_usb 2-2:1.3: usb_probe_interface
hci_usb 2-2:1.3: usb_probe_interface - got id
/home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file '004'
usb 2-2: new device found, idVendor=03f0, idProduct=171d
usb 2-2: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-2: Product: HP Integrated Module
usb 2-2: Manufacturer: Broadcom Corp
hub 3-0:1.0: state 7 ports 4 chg 000a evt 000a
ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [0] = 0x00010101 CSC PPS CCS
hub 3-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
usb 3-1: USB disconnect, address 4
usb 3-1: unregistering device
usb 3-1: usb_disable_device nuking all URBs
usb 3-1: unregistering interface 3-1:1.0
usb 3-1:1.0: uevent
usb 3-1:1.0: uevent
usb 3-1: uevent
hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
usb 3-1: new full speed USB device using ohci_hcd and address 6
ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
usb 3-1: ep0 maxpacket = 8
usb 3-1: default language 0x0409
usb 3-1: uevent
usb 3-1: usb_probe_device
usb 3-1: configuration #1 chosen from 1 choice
usb 3-1: adding 3-1:1.0 (config #1, interface 0)
usb 3-1:1.0: uevent
usb 3-1:1.0: uevent
/home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file '006'
usb 3-1: new device found, idVendor=08ff, idProduct=2580
usb 3-1: new device strings: Mfr=0, Product=1, SerialNumber=0
usb 3-1: Product: Fingerprint Sensor
ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [2] = 0x00010301 CSC LSDA PPS CCS
hub 3-0:1.0: port 3, status 0301, change 0001, 1.5 Mb/s
usb 3-3: USB disconnect, address 5
usb 3-3: unregistering device
usb 3-3: usb_disable_device nuking all URBs
usb 3-3: unregistering interface 3-3:1.0
usb 3-3:1.0: uevent
usb 3-3:1.0: uevent
usb 3-3: unregistering interface 3-3:1.1
/home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/file.c: removing 96 minor
usb 3-3:1.1: uevent
usb 3-3:1.1: uevent
usb 3-3: uevent
hub 3-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x301
ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [2] = 0x00100303 PRSC LSDA PPS PES CCS
usb 3-3: new low speed USB device using ohci_hcd and address 7
ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [2] = 0x00100303 PRSC LSDA PPS PES CCS
usb 3-3: skipped 1 descriptor after interface
usb 3-3: skipped 1 descriptor after interface
usb 3-3: default language 0x0409
usb 3-3: uevent
usb 3-3: usb_probe_device
usb 3-3: configuration #1 chosen from 1 choice
usb 3-3: adding 3-3:1.0 (config #1, interface 0)
usb 3-3:1.0: uevent
usb 3-3:1.0: uevent
usbhid 3-3:1.0: usb_probe_interface
usbhid 3-3:1.0: usb_probe_interface - got id
input: Logitech USB Receiver as /class/input/input10
input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:13.1-3
usb 3-3: adding 3-3:1.1 (config #1, interface 1)
usb 3-3:1.1: uevent
usb 3-3:1.1: uevent
usbhid 3-3:1.1: usb_probe_interface
usbhid 3-3:1.1: usb_probe_interface - got id
input: Logitech USB Receiver as /class/input/input11
/home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/file.c: looking for a minor, starting at 96
input,hiddev96: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:13.1-3
/home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file '007'
usb 3-3: new device found, idVendor=046d, idProduct=c521
usb 3-3: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-3: Product: USB Receiver
usb 3-3: Manufacturer: Logitech
hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0040
hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0004
hub 3-0:1.0: state 7 ports 4 chg 0000 evt 0008
hub 1-0:1.0: hub_suspend
usb usb1: bus auto-suspend
ehci_hcd 0000:00:13.2: suspend root hub
bcm43xx driver
ACPI: PCI Interrupt 0000:30:00.0[A] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:30:00.0 to 64
bcm43xx: Chip ID 0x4311, rev 0x1
bcm43xx: Number of cores: 4
bcm43xx: Core 0: ID 0x800, rev 0x11, vendor 0x4243
bcm43xx: Core 1: ID 0x812, rev 0xa, vendor 0x4243
bcm43xx: Core 2: ID 0x817, rev 0x3, vendor 0x4243
bcm43xx: Core 3: ID 0x820, rev 0x1, vendor 0x4243
bcm43xx: PHY connected
bcm43xx: Detected PHY: Analog: 4, Type 2, Revision 8
bcm43xx: Detected Radio: ID: 2205017f (Manuf: 17f Ver: 2050 Rev: 2)
bcm43xx: Radio initialized
bcm43xx: Radio initialized
bcm43xx: PHY connected
bcm43xx: Microcode rev 0x127, pl 0xe (2005-04-18 02:36:27)
bcm43xx: Radio turned on
bcm43xx: Radio enabled by hardware
bcm43xx: Chip initialized
bcm43xx: 32-bit DMA initialized
bcm43xx: Keys cleared
bcm43xx: Selected 802.11 core (phytype 2)
ADDRCONF(NETDEV_UP): eth1: link is not ready
SoftMAC: Scanning finished: scanned 13 channels starting with channel 1
SoftMAC: Associate: Scanning for networks first.
SoftMAC: Scanning finished: scanned 13 channels starting with channel 1
SoftMAC: Queueing Authentication Request to 00:17:9a:f3:b5:75
SoftMAC: Cannot associate without being authenticated, requested authentication
SoftMAC: Sent Authentication Request to 00:17:9a:f3:b5:75.
SoftMAC: Open Authentication completed with 00:17:9a:f3:b5:75
SoftMAC: sent association request!
SoftMAC: associated!
ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
SFW2-OUT-ERROR IN= OUT=eth1 SRC=0000:0000:0000:0000:0000:0000:0000:0000 DST=ff02:0000:0000:0000:0000:0000:0000:0016 LEN=76 TC=0 HOPLIMIT=1 FLOWLBL=0 OPT ( ) PROTO=ICMPv6 TYPE=143 CODE=0
SoftMAC: Getting essid from req_essid
SFW2-OUT-ERROR IN= OUT=eth1 SRC=0000:0000:0000:0000:0000:0000:0000:0000 DST=ff02:0000:0000:0000:0000:0001:ffbe:9531 LEN=64 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=ICMPv6 TYPE=135 CODE=0
SoftMAC: Getting essid from req_essid
SFW2-OUT-ERROR IN= OUT=eth1 SRC=fe80:0000:0000:0000:0214:a5ff:febe:9531 DST=ff02:0000:0000:0000:0000:0000:0000:0002 LEN=56 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=ICMPv6 TYPE=133 CODE=0
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SFW2-OUT-ERROR IN= OUT=eth1 SRC=fe80:0000:0000:0000:0214:a5ff:febe:9531 DST=ff02:0000:0000:0000:0000:0000:0000:0016 LEN=76 TC=0 HOPLIMIT=1 FLOWLBL=0 OPT ( ) PROTO=ICMPv6 TYPE=143 CODE=0
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SFW2-OUT-ERROR IN= OUT=eth1 SRC=fe80:0000:0000:0000:0214:a5ff:febe:9531 DST=ff02:0000:0000:0000:0000:0000:0000:0002 LEN=56 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=ICMPv6 TYPE=133 CODE=0
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:17:9a:f3:b5:75:08:00 SRC=62.121.83.254 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=19492 PROTO=2
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SFW2-OUT-ERROR IN= OUT=eth1 SRC=fe80:0000:0000:0000:0214:a5ff:febe:9531 DST=ff02:0000:0000:0000:0000:0000:0000:0002 LEN=56 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=ICMPv6 TYPE=133 CODE=0
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
eth1: no IPv6 routers present

WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()

Call Trace:
 [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9
 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
 [<ffffffff8024ee6d>] update_target+0x71/0x76
 [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0
 [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382
 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
 [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
 [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
 [<ffffffff8022f18e>] default_wake_function+0x0/0xf
 [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
 [<ffffffff80282e91>] vma_link+0xdd/0x10b
 [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
 [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
 [<ffffffff802a0896>] do_ioctl+0x2a/0x77
 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
 [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
 [<ffffffff8020bfde>] system_call+0x7e/0x83

WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()

Call Trace:
 [<ffffffff8021b2b2>] smp_call_function_mask+0x6d/0x82
 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
 [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2
 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
 [<ffffffff8024ee6d>] update_target+0x71/0x76
 [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2
 [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382
 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
 [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
 [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
 [<ffffffff8022f18e>] default_wake_function+0x0/0xf
 [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
 [<ffffffff80282e91>] vma_link+0xdd/0x10b
 [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
 [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
 [<ffffffff802a0896>] do_ioctl+0x2a/0x77
 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
 [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
 [<ffffffff8020bfde>] system_call+0x7e/0x83

SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid

WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()

Call Trace:
 [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9
 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
 [<ffffffff8024ee6d>] update_target+0x71/0x76
 [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0
 [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382
 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
 [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
 [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
 [<ffffffff8022f18e>] default_wake_function+0x0/0xf
 [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
 [<ffffffff80282e91>] vma_link+0xdd/0x10b
 [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
 [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
 [<ffffffff802a0896>] do_ioctl+0x2a/0x77
 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
 [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
 [<ffffffff8020bfde>] system_call+0x7e/0x83

WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()

Call Trace:
 [<ffffffff8021b2b2>] smp_call_function_mask+0x6d/0x82
 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
 [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2
 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
 [<ffffffff8024ee6d>] update_target+0x71/0x76
 [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2
 [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382
 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
 [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
 [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
 [<ffffffff8022f18e>] default_wake_function+0x0/0xf
 [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
 [<ffffffff80282e91>] vma_link+0xdd/0x10b
 [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
 [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
 [<ffffffff802a0896>] do_ioctl+0x2a/0x77
 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
 [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
 [<ffffffff8020bfde>] system_call+0x7e/0x83

SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:17:9a:f3:b5:75:08:00 SRC=62.121.83.254 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=21260 PROTO=2
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:17:9a:f3:b5:75:08:00 SRC=62.121.83.254 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=23324 PROTO=2
SoftMAC: Getting essid from req_essid

WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()

Call Trace:
 [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9
 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
 [<ffffffff8024ee6d>] update_target+0x71/0x76
 [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0
 [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382
 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
 [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
 [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
 [<ffffffff8022f18e>] default_wake_function+0x0/0xf
 [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
 [<ffffffff80282e91>] vma_link+0xdd/0x10b
 [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
 [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
 [<ffffffff802a0896>] do_ioctl+0x2a/0x77
 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
 [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
 [<ffffffff8020bfde>] system_call+0x7e/0x83

WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()

Call Trace:
 [<ffffffff8021b2b2>] smp_call_function_mask+0x6d/0x82
 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
 [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2
 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
 [<ffffffff8024ee6d>] update_target+0x71/0x76
 [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2
 [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382
 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
 [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
 [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
 [<ffffffff8022f18e>] default_wake_function+0x0/0xf
 [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
 [<ffffffff80282e91>] vma_link+0xdd/0x10b
 [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
 [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
 [<ffffffff802a0896>] do_ioctl+0x2a/0x77
 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
 [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
 [<ffffffff8020bfde>] system_call+0x7e/0x83

WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()

Call Trace:
 [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9
 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
 [<ffffffff8024ee6d>] update_target+0x71/0x76
 [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0
 [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382
 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
 [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
 [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
 [<ffffffff8022f18e>] default_wake_function+0x0/0xf
 [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
 [<ffffffff80282e91>] vma_link+0xdd/0x10b
 [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
 [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
 [<ffffffff802a0896>] do_ioctl+0x2a/0x77
 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
 [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
 [<ffffffff8020bfde>] system_call+0x7e/0x83

WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()

Call Trace:
 [<ffffffff8021b2b2>] smp_call_function_mask+0x6d/0x82
 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
 [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2
 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
 [<ffffffff8024ee6d>] update_target+0x71/0x76
 [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2
 [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382
 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
 [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
 [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
 [<ffffffff8022f18e>] default_wake_function+0x0/0xf
 [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
 [<ffffffff80282e91>] vma_link+0xdd/0x10b
 [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
 [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
 [<ffffffff802a0896>] do_ioctl+0x2a/0x77
 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
 [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
 [<ffffffff8020bfde>] system_call+0x7e/0x83

SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid

WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()

Call Trace:
 [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9
 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
 [<ffffffff8024ee6d>] update_target+0x71/0x76
 [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0
 [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382
 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
 [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
 [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
 [<ffffffff8022f18e>] default_wake_function+0x0/0xf
 [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
 [<ffffffff80282e91>] vma_link+0xdd/0x10b
 [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
 [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
 [<ffffffff802a0896>] do_ioctl+0x2a/0x77
 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
 [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
 [<ffffffff8020bfde>] system_call+0x7e/0x83

WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()

Call Trace:
 [<ffffffff8021b2b2>] smp_call_function_mask+0x6d/0x82
 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
 [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2
 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
 [<ffffffff8024ee6d>] update_target+0x71/0x76
 [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2
 [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382
 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
 [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
 [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
 [<ffffffff8022f18e>] default_wake_function+0x0/0xf
 [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
 [<ffffffff80282e91>] vma_link+0xdd/0x10b
 [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
 [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
 [<ffffffff802a0896>] do_ioctl+0x2a/0x77
 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
 [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
 [<ffffffff8020bfde>] system_call+0x7e/0x83

SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid

WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()

Call Trace:
 [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9
 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
 [<ffffffff8024ee6d>] update_target+0x71/0x76
 [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0
 [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382
 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
 [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
 [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
 [<ffffffff8022f18e>] default_wake_function+0x0/0xf
 [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
 [<ffffffff80282e91>] vma_link+0xdd/0x10b
 [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
 [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
 [<ffffffff802a0896>] do_ioctl+0x2a/0x77
 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
 [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
 [<ffffffff8020bfde>] system_call+0x7e/0x83

WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()

Call Trace:
 [<ffffffff8021b2b2>] smp_call_function_mask+0x6d/0x82
 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
 [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2
 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
 [<ffffffff8024ee6d>] update_target+0x71/0x76
 [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2
 [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382
 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
 [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
 [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
 [<ffffffff8022f18e>] default_wake_function+0x0/0xf
 [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
 [<ffffffff80282e91>] vma_link+0xdd/0x10b
 [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
 [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
 [<ffffffff802a0896>] do_ioctl+0x2a/0x77
 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
 [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
 [<ffffffff8020bfde>] system_call+0x7e/0x83

SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid

WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()

Call Trace:
 [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9
 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
 [<ffffffff8024ee6d>] update_target+0x71/0x76
 [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0
 [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382
 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
 [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
 [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
 [<ffffffff8022f18e>] default_wake_function+0x0/0xf
 [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
 [<ffffffff80282e91>] vma_link+0xdd/0x10b
 [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
 [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
 [<ffffffff802a0896>] do_ioctl+0x2a/0x77
 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
 [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
 [<ffffffff8020bfde>] system_call+0x7e/0x83

WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()

Call Trace:
 [<ffffffff8021b2b2>] smp_call_function_mask+0x6d/0x82
 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
 [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2
 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
 [<ffffffff8024ee6d>] update_target+0x71/0x76
 [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2
 [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382
 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
 [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
 [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
 [<ffffffff8022f18e>] default_wake_function+0x0/0xf
 [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
 [<ffffffff80282e91>] vma_link+0xdd/0x10b
 [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
 [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
 [<ffffffff802a0896>] do_ioctl+0x2a/0x77
 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
 [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
 [<ffffffff8020bfde>] system_call+0x7e/0x83

SoftMAC: Getting essid from req_essid
SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:17:9a:f3:b5:75:08:00 SRC=62.121.83.254 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=25180 PROTO=2
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid

WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()

Call Trace:
 [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9
 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
 [<ffffffff8024ee6d>] update_target+0x71/0x76
 [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0
 [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382
 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
 [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
 [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
 [<ffffffff8022f18e>] default_wake_function+0x0/0xf
 [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
 [<ffffffff80282e91>] vma_link+0xdd/0x10b
 [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
 [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
 [<ffffffff802a0896>] do_ioctl+0x2a/0x77
 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
 [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
 [<ffffffff8020bfde>] system_call+0x7e/0x83

WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()

Call Trace:
 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
 [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2
 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
 [<ffffffff8024ee6d>] update_target+0x71/0x76
 [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2
 [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382
 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
 [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
 [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
 [<ffffffff8022f18e>] default_wake_function+0x0/0xf
 [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
 [<ffffffff80282e91>] vma_link+0xdd/0x10b
 [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
 [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
 [<ffffffff802a0896>] do_ioctl+0x2a/0x77
 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
 [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
 [<ffffffff8020bfde>] system_call+0x7e/0x83

SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid

WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()

Call Trace:
 [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9
 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
 [<ffffffff8024ee6d>] update_target+0x71/0x76
 [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0
 [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382
 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
 [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
 [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
 [<ffffffff8022f18e>] default_wake_function+0x0/0xf
 [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
 [<ffffffff80282e91>] vma_link+0xdd/0x10b
 [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
 [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
 [<ffffffff802a0896>] do_ioctl+0x2a/0x77
 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
 [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
 [<ffffffff8020bfde>] system_call+0x7e/0x83

WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()

Call Trace:
 [<ffffffff8021b2b2>] smp_call_function_mask+0x6d/0x82
 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
 [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2
 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
 [<ffffffff8024ee6d>] update_target+0x71/0x76
 [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2
 [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382
 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
 [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
 [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
 [<ffffffff8022f18e>] default_wake_function+0x0/0xf
 [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
 [<ffffffff80282e91>] vma_link+0xdd/0x10b
 [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
 [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
 [<ffffffff802a0896>] do_ioctl+0x2a/0x77
 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
 [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
 [<ffffffff8020bfde>] system_call+0x7e/0x83

SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid

WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()

Call Trace:
 [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9
 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
 [<ffffffff8024ee6d>] update_target+0x71/0x76
 [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0
 [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382
 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
 [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
 [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
 [<ffffffff8022f18e>] default_wake_function+0x0/0xf
 [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
 [<ffffffff80282e91>] vma_link+0xdd/0x10b
 [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
 [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
 [<ffffffff802a0896>] do_ioctl+0x2a/0x77
 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
 [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
 [<ffffffff8020bfde>] system_call+0x7e/0x83

WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()

Call Trace:
 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
 [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2
 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
 [<ffffffff8024ee6d>] update_target+0x71/0x76
 [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2
 [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382
 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
 [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
 [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
 [<ffffffff8022f18e>] default_wake_function+0x0/0xf
 [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
 [<ffffffff80282e91>] vma_link+0xdd/0x10b
 [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
 [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
 [<ffffffff802a0896>] do_ioctl+0x2a/0x77
 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
 [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
 [<ffffffff8020bfde>] system_call+0x7e/0x83

SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:17:9a:f3:b5:75:08:00 SRC=62.121.83.254 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=26892 PROTO=2
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid

WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()

Call Trace:
 [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9
 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
 [<ffffffff8024ee6d>] update_target+0x71/0x76
 [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0
 [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382
 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
 [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
 [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
 [<ffffffff8022f18e>] default_wake_function+0x0/0xf
 [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
 [<ffffffff80282e91>] vma_link+0xdd/0x10b
 [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
 [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
 [<ffffffff802a0896>] do_ioctl+0x2a/0x77
 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
 [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
 [<ffffffff8020bfde>] system_call+0x7e/0x83

WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()

Call Trace:
 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
 [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2
 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
 [<ffffffff8024ee6d>] update_target+0x71/0x76
 [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2
 [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382
 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
 [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
 [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
 [<ffffffff8022f18e>] default_wake_function+0x0/0xf
 [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
 [<ffffffff80282e91>] vma_link+0xdd/0x10b
 [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
 [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
 [<ffffffff802a0896>] do_ioctl+0x2a/0x77
 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
 [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
 [<ffffffff8020bfde>] system_call+0x7e/0x83

SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid

WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()

Call Trace:
 [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9
 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
 [<ffffffff8024ee6d>] update_target+0x71/0x76
 [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0
 [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382
 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
 [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
 [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
 [<ffffffff8022f18e>] default_wake_function+0x0/0xf
 [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
 [<ffffffff80282e91>] vma_link+0xdd/0x10b
 [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
 [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
 [<ffffffff802a0896>] do_ioctl+0x2a/0x77
 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
 [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
 [<ffffffff8020bfde>] system_call+0x7e/0x83

WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()

Call Trace:
 [<ffffffff8021b2b2>] smp_call_function_mask+0x6d/0x82
 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
 [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2
 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
 [<ffffffff8024ee6d>] update_target+0x71/0x76
 [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2
 [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382
 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
 [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
 [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
 [<ffffffff8022f18e>] default_wake_function+0x0/0xf
 [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
 [<ffffffff80282e91>] vma_link+0xdd/0x10b
 [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
 [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
 [<ffffffff802a0896>] do_ioctl+0x2a/0x77
 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
 [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
 [<ffffffff8020bfde>] system_call+0x7e/0x83

SoftMAC: Getting essid from req_essid

WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()

Call Trace:
 [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9
 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
 [<ffffffff8024ee6d>] update_target+0x71/0x76
 [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0
 [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382
 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
 [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
 [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
 [<ffffffff8022f18e>] default_wake_function+0x0/0xf
 [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
 [<ffffffff80282e91>] vma_link+0xdd/0x10b
 [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
 [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
 [<ffffffff802a0896>] do_ioctl+0x2a/0x77
 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
 [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
 [<ffffffff8020bfde>] system_call+0x7e/0x83

WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()

Call Trace:
 [<ffffffff8021b2b2>] smp_call_function_mask+0x6d/0x82
 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
 [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2
 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
 [<ffffffff8024ee6d>] update_target+0x71/0x76
 [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2
 [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382
 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
 [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
 [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
 [<ffffffff8022f18e>] default_wake_function+0x0/0xf
 [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
 [<ffffffff80282e91>] vma_link+0xdd/0x10b
 [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
 [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
 [<ffffffff802a0896>] do_ioctl+0x2a/0x77
 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
 [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
 [<ffffffff8020bfde>] system_call+0x7e/0x83

SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid

Mark Gross

2007-10-15 16:09 UTC #51 lore raw

Quoted 7 lines · Rafael J. Wysocki

Quoted 6 lines · Andrew Morton
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.23/2.6.23-mm1/
- I've been largely avoiding applying anything since rc8-mm2 in an attempt to stabilise things for the 2.6.23 merge.

Quoted 7 lines

Quoted 3 lines
But that didn't stop all the subsystem maintainers from going nuts, with the usual accuracy. We're up to a 37MB diff now, but it seems to be working a bit better.
I get many traces similar to the one below from it (w/ hotfixes):
WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()

This is from : WARN_ON(irqs_disabled()) in the cmp_call_function_mask processor_idle.c is registering a acpi_processor_latency_notify

my code changed the notifier call from blocking_notifier_call_chain to srcu_notifier_call_chain, because dynamic creation of notifier chains at runtime where easier with the srcu_notifier_call_chain than the blocking_notifier_call_chain.

As dynamic creation of PM_QOS parameters are no longer needed I can change the notifiers back to match what was in lanency.c

However; looking at the call tree differences between blockin_notifier_call_chain and srcu_notifier_call_chain I cannot see a difference in irq enabling / disabling. I'm not confident this will address this yet.

I'll change the PM_QOS params patch to use blocking notifiers and test on a 64bit boot and see what happens. I've been needing to setup my x86_64 dev box for a while now anyway.

thanks,

--mgross

Quoted 4,244 lines

Call Trace:
 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
 [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2
 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
 [<ffffffff8024ee6d>] update_target+0x71/0x76
 [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2
 [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382
 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
 [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
 [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
 [<ffffffff8022f18e>] default_wake_function+0x0/0xf
 [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
 [<ffffffff80282e91>] vma_link+0xdd/0x10b
 [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
 [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
 [<ffffffff802a0896>] do_ioctl+0x2a/0x77
 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
 [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
 [<ffffffff8020bfde>] system_call+0x7e/0x83
Full dmesg attached.
Greetings,
Rafael
Linux version 2.6.23-mm1 (rafael@albercik) (gcc version 4.1.2 20061115 (prerelease) (SUSE Linux)) #26 SMP Fri Oct 12 22:59:33 CEST 2007 Command line: root=/dev/sda3 vga=792 resume=/dev/sda1 no_console_suspend
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000077fd0000 (usable)
BIOS-e820: 0000000077fd0000 - 0000000077fe5600 (reserved)
BIOS-e820: 0000000077fe5600 - 0000000077ff8000 (ACPI NVS)
BIOS-e820: 0000000077ff8000 - 0000000080000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec02000 (reserved)
BIOS-e820: 00000000ffbc0000 - 00000000ffcc0000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
Entering add_active_range(0, 0, 159) 0 entries of 256 used
Entering add_active_range(0, 256, 491472) 1 entries of 256 used
end_pfn_map = 1048576
DMI 2.4 present.
ACPI: RSDP 000F7D30, 0024 (r2 HP )
ACPI: XSDT 77FE57B4, 0054 (r1 HP 0944 6070620 HP 1)
ACPI: FACP 77FE5684, 00F4 (r4 HP 0944 3 HP 1)
ACPI: DSDT 77FE58DC, EE7A (r1 HP SB400 10000 MSFT 100000E)
ACPI: FACS 77FF7E80, 0040
ACPI: APIC 77FE5808, 0062 (r1 HP 0944 1 HP 1)
ACPI: MCFG 77FE586C, 003C (r1 HP 0944 1 HP 1)
ACPI: TCPA 77FE58A8, 0032 (r2 HP 0944 1 HP 1)
ACPI: SSDT 77FF4756, 0059 (r1 HP HPQNLP 1 MSFT 100000E)
ACPI: SSDT 77FF47AF, 0206 (r1 HP PSSTBLID 1 HP 1)
Entering add_active_range(0, 0, 159) 0 entries of 256 used
Entering add_active_range(0, 256, 491472) 1 entries of 256 used
No mptable found.
sizeof(struct page) = 56
Zone PFN ranges:
DMA 0 -> 4096
DMA32 4096 -> 1048576
Normal 1048576 -> 1048576
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0:        0 ->      159
    0:      256 ->   491472
On node 0 totalpages: 491375
Node 0 memmap at 0xffff810001000000 size 27525120 first pfn 0xffff810001000000
DMA zone: 56 pages used for memmap
DMA zone: 1481 pages reserved
DMA zone: 2462 pages, LIFO batch:0
DMA32 zone: 6663 pages used for memmap
DMA32 zone: 480713 pages, LIFO batch:31
Normal zone: 0 pages used for memmap
Movable zone: 0 pages used for memmap
ATI board detected. Disabling timer routing over 8254.
ACPI: PM-Timer IO Port: 0x8008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
Setting APIC routing to flat
Using ACPI (MADT) for SMP configuration information
swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
SMP: Allowing 2 CPUs, 0 hotplug CPUs
PERCPU: Allocating 46704 bytes of per cpu data
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 483175
Kernel command line: root=/dev/sda3 vga=792 resume=/dev/sda1 no_console_suspend
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Extended CMOS year: 2000
TSC calibrated against PM_TIMER
Marking TSC unstable due to TSCs unsynchronized
time.c: Detected 1995.006 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Checking aperture...
CPU 0: aperture @ 108000000 size 32 MB
Aperture too small (32 MB)
No AGP bridge found
Memory: 1923916k/1965888k available (2285k kernel code, 41360k reserved, 1517k data, 252k init)
Calibrating delay using timer specific routine.. 3994.14 BogoMIPS (lpj=7988280)
Security Framework initialized
Capability LSM initialized
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
SMP alternatives: switching to UP code
ACPI: Core revision 20070126
Parsing all Control Methods:
Table [DSDT](id 0001) - 1153 Objects with 113 Devices 337 Methods 33 Regions
Parsing all Control Methods:
Table [SSDT](id 0002) - 2 Objects with 0 Devices 2 Methods 0 Regions
Parsing all Control Methods:
Table [SSDT](id 0003) - 8 Objects with 0 Devices 0 Methods 0 Regions
tbxface-0598 [00] tb_load_namespace : ACPI Tables successfully acquired
evxfevnt-0091 [00] enable : Transition to ACPI mode successful
..MP-BIOS bug: 8254 timer not connected to IO-APIC
Disabling APIC timer
SMP alternatives: switching to SMP code
Booting processor 1/2 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 3990.29 BogoMIPS (lpj=7980587)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping 02
Brought up 2 CPUs
CPU0 attaching sched-domain:
domain 0: span 00000000,00000000,00000000,00000003
groups: 00000000,00000000,00000000,00000001 00000000,00000000,00000000,00000002
CPU1 attaching sched-domain:
domain 0: span 00000000,00000000,00000000,00000003
groups: 00000000,00000000,00000000,00000002 00000000,00000000,00000000,00000001
net_namespace: 120 bytes
Time: 21:13:03 Date: 10/12/07
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1
evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x15
evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 3 Wake, Enabled 11 Runtime GPEs in this block
ACPI: EC: Look up EC in DSDT
Completing Region/Field/Buffer/Package initialization:................................................................................................................................................................ Initialized 29/33 Regions 0/0 Fields 63/64 Buffers 68/78 Packages (1172 nodes)
Initializing Device/Processor/Thermal objects by executing _INI methods:.......
Executed 7 _INI methods requiring 2 _STA executions (examined 120 objects)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base 3758096384 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG at e0000000 - efffffff
PCI: No mmconfig possible on device 00:18
ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
ACPI: PCI Root Bridge [C074] (0000:00)
PCI: Transparent bridge - 0000:00:14.4
ACPI: PCI Interrupt Routing Table [\_SB_.C074._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C074.C075._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C074.C0DF._PRT]
ACPI: PCI Interrupt Link [C125] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [C126] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [C127] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [C128] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [C129] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [C12A] (IRQs 9) *0, disabled.
ACPI: PCI Interrupt Link [C12B] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [C12C] (IRQs *10 11)
ACPI: Power Resource [C223] (off)
ACPI: Power Resource [C1FE] (off)
ACPI: Power Resource [C217] (on)
ACPI: Power Resource [C34B] (off)
ACPI: Power Resource [C34C] (off)
ACPI: Power Resource [C34D] (off)
ACPI: Power Resource [C34E] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
libata version 3.00 loaded.
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
PCI: Cannot allocate resource region 0 of device 0000:00:14.2
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
DMAR:No DMAR devices found
ACPI: RTC can wake from S4
system 00:00: iomem range 0x0-0x9ffff could not be reserved
system 00:00: iomem range 0xe0000-0xfffff could not be reserved
system 00:00: iomem range 0x100000-0x77ffffff could not be reserved
system 00:0a: ioport range 0x40b-0x40b has been reserved
system 00:0a: ioport range 0x4d0-0x4d1 has been reserved
system 00:0a: ioport range 0x4d6-0x4d6 has been reserved
system 00:0a: iomem range 0xffb00000-0xffbfffff could not be reserved
system 00:0a: iomem range 0xfff00000-0xffffffff could not be reserved
system 00:0b: ioport range 0x8000-0x802f has been reserved
system 00:0b: ioport range 0x8100-0x811f has been reserved
system 00:0b: iomem range 0xe0000000-0xefffffff could not be reserved
system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:0c: iomem range 0xcf000-0xcffff has been reserved
system 00:0c: iomem range 0x78000000-0x7fffffff could not be reserved
system 00:0c: iomem range 0xfee00000-0xfee00fff could not be reserved
PCI: Bridge: 0000:00:01.0
IO window: 6000-6fff
MEM window: d4300000-d43fffff
PREFETCH window: c0000000-c7ffffff
PCI: Bridge: 0000:00:04.0
IO window: 4000-5fff
MEM window: d0000000-d3ffffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:05.0
IO window: 2000-3fff
MEM window: cc000000-cfffffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:06.0
IO window: disabled.
MEM window: c8000000-c80fffff
PREFETCH window: disabled.
PCI: Bus 3, cardbus bridge: 0000:02:04.0
IO window: 00001000-000010ff
IO window: 00001400-000014ff
PREFETCH window: 8c000000-8fffffff
MEM window: 90000000-93ffffff
PCI: Bridge: 0000:00:14.4
IO window: disabled.
MEM window: d4000000-d42fffff
PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:04.0 to 64
PCI: Setting latency timer of device 0000:00:05.0 to 64
PCI: Setting latency timer of device 0000:00:06.0 to 64
ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 20 (level, low) -> IRQ 20
NET: Registered protocol family 2
Time: acpi_pm clocksource has been installed.
Clockevents: could not switch to one-shot mode:<6>Clockevents: could not switch to one-shot mode: lapic is not functional. Could not switch to high resolution mode on CPU 1
lapic is not functional.
Could not switch to high resolution mode on CPU 0
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 131072 (order: 9, 3145728 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 5282k freed
audit: initializing netlink socket (disabled)
audit(1192223582.968:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: MSI quirk detected. MSI deactivated.
Boot video device is 0000:01:05.0
PCI: Setting latency timer of device 0000:00:04.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:04.0:pcie00]
Allocate Port Service[0000:00:04.0:pcie01]
Allocate Port Service[0000:00:04.0:pcie03]
PCI: Setting latency timer of device 0000:00:05.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:05.0:pcie00]
Allocate Port Service[0000:00:05.0:pcie01]
Allocate Port Service[0000:00:05.0:pcie03]
PCI: Setting latency timer of device 0000:00:06.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:06.0:pcie00]
Allocate Port Service[0000:00:06.0:pcie01]
Allocate Port Service[0000:00:06.0:pcie03]
AER service couldn't init device 0000:00:04.0:pcie01 - no _OSC support
AER service couldn't init device 0000:00:05.0:pcie01 - no _OSC support
AER service couldn't init device 0000:00:06.0:pcie01 - no _OSC support
vesafb: framebuffer at 0xc0000000, mapped to 0xffffc20010100000, using 4608k, total 16384k
vesafb: mode is 1024x768x24, linelength=3072, pages=6
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.102
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
RAMDISK driver initialized: 16 RAM disks of 128000K size 1024 blocksize
sata_sil 0000:00:12.0: version 2.3
ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 16 (level, low) -> IRQ 16
scsi0 : sata_sil
scsi1 : sata_sil
ata1: SATA max UDMA/100 mmio m512@0xd4409000 tf 0xd4409080 irq 16
ata2: SATA max UDMA/100 mmio m512@0xd4409000 tf 0xd44090c0 irq 16
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-7: FUJITSU MHV2080BH, 892C, max UDMA/100
ata1.00: 156301488 sectors, multi 16: LBA48
ata1.00: configured for UDMA/100
ata2: SATA link down (SStatus 0 SControl 300)
scsi 0:0:0:0: Direct-Access ATA FUJITSU MHV2080B 892C PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
sd 0:0:0:0: [sda] Attached SCSI disk
PNP: PS/2 Controller [PNP0303:C214,PNP0f13:C215] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: PC Speaker as /class/input/input0
input: AT Translated Set 2 keyboard as /class/input/input1
NET: Registered protocol family 1
swsusp: Resume From Partition /dev/sda1
PM: Checking swsusp image.
PM: Resume from disk failed.
registered taskstats version 1
Magic number: 11:322:247
Freeing unused kernel memory: 252k freed
Write protecting the kernel read-only data: 1124k
sd 0:0:0:0: Attached scsi generic sg0 type 0
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ATIIXP: IDE controller (0x1002:0x4376 rev 0x80) at PCI slot 0000:00:14.1
ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16
ATIIXP: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x7040-0x7047, BIOS settings: hda:DMA, hdb:pio
ATIIXP: simplex device: DMA disabled
ide1: ATIIXP Bus-Master DMA disabled (BIOS)
Probing IDE interface ide0...
hda: HL-DT-ST DVDRAM GMA-4082N, ATAPI CD/DVD-ROM drive
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: selected mode 0x22
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
swsusp: Marking nosave pages: 000000000009f000 - 0000000000100000
swsusp: Basic memory bitmaps created
swsusp: Basic memory bitmaps freed
Attempting manual resume
swsusp: Resume From Partition 8:1
PM: Checking swsusp image.
PM: Resume from disk failed.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
ieee80211_crypt: registered algorithm 'NULL'
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <[email protected]> Floppy drive(s): fd0 is 1.44M
bcm43xx driver
ACPI: PCI Interrupt 0000:30:00.0[A] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:30:00.0 to 64
bcm43xx: Chip ID 0x4311, rev 0x1
bcm43xx: Number of cores: 4
bcm43xx: Core 0: ID 0x800, rev 0x11, vendor 0x4243
bcm43xx: Core 1: ID 0x812, rev 0xa, vendor 0x4243
bcm43xx: Core 2: ID 0x817, rev 0x3, vendor 0x4243
bcm43xx: Core 3: ID 0x820, rev 0x1, vendor 0x4243
bcm43xx: PHY connected
bcm43xx: Detected PHY: Analog: 4, Type 2, Revision 8
bcm43xx: Detected Radio: ID: 2205017f (Manuf: 17f Ver: 2050 Rev: 2)
bcm43xx: Radio initialized
bcm43xx: Radio initialized
ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
tg3.c:v3.82 (October 5, 2007)
eth0 renamed to eth1
sysfs: duplicate filename 'eth1' can not be created
WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/fs/sysfs/dir.c:416 sysfs_add_one()

Call Trace:
 [<ffffffff802da54e>] sysfs_add_one+0x5c/0xc9
 [<ffffffff802db415>] sysfs_create_link+0xd1/0x12c
 [<ffffffff80382e0a>] device_rename+0x17a/0x1db
 [<ffffffff803d6c9d>] dev_change_name+0x13c/0x234
 [<ffffffff803d6f99>] dev_ifsioc+0x204/0x2d0
 [<ffffffff803d7585>] dev_ioctl+0x520/0x633
 [<ffffffff8027ef6a>] handle_mm_fault+0x1f6/0x6e5
 [<ffffffff8030cb16>] __up_read+0x8f/0x97
 [<ffffffff803c9d4d>] sock_ioctl+0x1fe/0x20c
 [<ffffffff802a0896>] do_ioctl+0x2a/0x77
 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
 [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
 [<ffffffff8020bfde>] system_call+0x7e/0x83
net eth1: device_rename: sysfs_create_symlink failed (-17)
ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 23 (level, low) -> IRQ 23
eth0: Tigon3 [partno(BCM95788A50) rev 3003 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000Base-T Ethernet 00:17:08:2e:2e:f3
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[1]
eth0: dma_rwctrl[763f0000] dma_mask[32-bit]
piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
sdhci: SDHCI controller found at 0000:02:04.3 [104c:803c] (rev 0)
ACPI: PCI Interrupt 0000:02:04.3[A] -> GSI 20 (level, low) -> IRQ 20
mmc0: SDHCI at 0xd4019000 irq 20 PIO
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ACPI: PCI Interrupt 0000:02:04.1[A] -> GSI 20 (level, low) -> IRQ 20
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[d4011000-d40117ff] Max Packet=[2048] IR/IT contexts=[4/8]
ehci_hcd: block sizes: qh 160 qtd 96 itd 192 sitd 96
ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:13.2: EHCI Host Controller /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file 'devices' /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file '001'
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:13.2: reset hcs_params 0x2408 dbg=0 cc=2 pcc=4 ordered !ppc ports=8
ehci_hcd 0000:00:13.2: reset hcc_params a012 thresh 1 uframes 256/512/1024
ehci_hcd 0000:00:13.2: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
ehci_hcd 0000:00:13.2: MWI active
ehci_hcd 0000:00:13.2: irq 19, io mem 0xd4403000
ehci_hcd 0000:00:13.2: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
ehci_hcd 0000:00:13.2: init command 010009 (park)=0 ithresh=1 period=256 RUN
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: default language 0x0409
usb usb1: uevent
usb usb1: usb_probe_device
usb usb1: configuration #1 chosen from 1 choice
usb usb1: adding 1-0:1.0 (config #1, interface 0)
usb 1-0:1.0: uevent
usb 1-0:1.0: uevent
hub 1-0:1.0: usb_probe_interface
hub 1-0:1.0: usb_probe_interface - got id
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
hub 1-0:1.0: standalone hub
hub 1-0:1.0: no power switching (usb 1.0)
hub 1-0:1.0: individual port over-current protection
hub 1-0:1.0: Single TT
hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
hub 1-0:1.0: power on to power good time: 20ms
hub 1-0:1.0: local power source is good
hub 1-0:1.0: trying to enable port power on non-switchable hub
hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, DMA
Uniform CD-ROM driver Revision: 3.20
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd: block sizes: ed 80 td 96
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0000 /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file '001'
usb usb1: new device found, idVendor=0000, idProduct=0000
ehci_hcd 0000:00:13.2: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT
hub 1-0:1.0: port 2, status 0501, change 0001, 480 Mb/s
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.23-mm1 ehci_hcd
usb usb1: SerialNumber: 0000:00:13.2
hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x501
ACPI: PCI Interrupt 0000:02:04.2[A] -> GSI 20 (level, low) -> IRQ 20
Yenta: CardBus bridge found at 0000:02:04.0 [103c:30b0]
ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 19
Yenta: Enabling burst memory read transactions
ohci_hcd 0000:00:13.0: OHCI Host Controller /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file '002'
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:13.0: created debug files
ohci_hcd 0000:00:13.0: irq 19, io mem 0xd4401000
Yenta: Using INTVAL to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:02:04.0, mfunc 0x01a11002, devctl 0x64
ehci_hcd 0000:00:13.2: port 2 full speed --> companion
ehci_hcd 0000:00:13.2: GetStatus port 2 status 003801 POWER OWNER sig=j CONNECT
hub 1-0:1.0: port 2 not reset yet, waiting 50ms
ohci_hcd 0000:00:13.0: OHCI controller state
ohci_hcd 0000:00:13.0: OHCI 1.0, NO legacy support registers
ohci_hcd 0000:00:13.0: control 0x083 HCFS=operational CBSR=3
ohci_hcd 0000:00:13.0: cmdstatus 0x00000 SOC=0
ohci_hcd 0000:00:13.0: intrstatus 0x00000004 SF
ohci_hcd 0000:00:13.0: intrenable 0x8000005a MIE RHSC UE RD WDH
ohci_hcd 0000:00:13.0: hcca frame #0005
ohci_hcd 0000:00:13.0: roothub.a 02000204 POTPGT=2 NPS NDP=4(4)
ohci_hcd 0000:00:13.0: roothub.b 00000000 PPCM=0000 DR=0000
ohci_hcd 0000:00:13.0: roothub.status 00008000 DRWE
ohci_hcd 0000:00:13.0: roothub.portstatus [0] 0x00000100 PPS
ohci_hcd 0000:00:13.0: roothub.portstatus [1] 0x00010100 CSC PPS
ohci_hcd 0000:00:13.0: roothub.portstatus [2] 0x00000100 PPS
ohci_hcd 0000:00:13.0: roothub.portstatus [3] 0x00000100 PPS
usb usb2: default language 0x0409
usb usb2: uevent
usb usb2: usb_probe_device
usb usb2: configuration #1 chosen from 1 choice
ehci_hcd 0000:00:13.2: GetStatus port 2 status 003002 POWER OWNER sig=se0 CSC
ehci_hcd 0000:00:13.2: GetStatus port 3 status 001803 POWER sig=j CSC CONNECT
hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s
usb usb2: adding 2-0:1.0 (config #1, interface 0)
usb 2-0:1.0: uevent
usb 2-0:1.0: uevent
hub 2-0:1.0: usb_probe_interface
hub 2-0:1.0: usb_probe_interface - got id
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
hub 2-0:1.0: standalone hub
hub 2-0:1.0: no power switching (usb 1.0)
hub 2-0:1.0: global over-current protection
hub 2-0:1.0: power on to power good time: 4ms
hub 2-0:1.0: local power source is good
hub 2-0:1.0: no over-current condition exists
hub 2-0:1.0: trying to enable port power on non-switchable hub
rtc_cmos: probe of 00:07 failed with error -16
hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x501
Yenta: ISA IRQ mask 0x0eb8, PCI irq 20
ehci_hcd 0000:00:13.2: port 3 full speed --> companion
ehci_hcd 0000:00:13.2: GetStatus port 3 status 003801 POWER OWNER sig=j CONNECT
hub 1-0:1.0: port 3 not reset yet, waiting 50ms
Socket status: 30000006
/home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file '001'
usb usb2: new device found, idVendor=0000, idProduct=0000
usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.23-mm1 ohci_hcd
usb usb2: SerialNumber: 0000:00:13.0
ehci_hcd 0000:00:13.2: GetStatus port 3 status 003002 POWER OWNER sig=se0 CSC
ehci_hcd 0000:00:13.2: GetStatus port 6 status 001403 POWER sig=k CSC CONNECT
hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
Yenta: Raising subordinate bus# of parent bus (#02) from #03 to #06
hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:13.2: port 6 low speed --> companion
pcmcia: parent PCI bridge Memory window: 0xd4000000 - 0xd42fffff
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 19
ohci_hcd 0000:00:13.1: OHCI Host Controller
ehci_hcd 0000:00:13.2: GetStatus port 6 status 003002 POWER OWNER sig=se0 CSC
hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0040
hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0004
ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [1] = 0x00010101 CSC PPS CCS
hub 2-0:1.0: port 2, status 0101, change 0001, 12 Mb/s /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file '003'
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:13.1: created debug files
ohci_hcd 0000:00:13.1: irq 19, io mem 0xd4402000
hub 2-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101
ohci_hcd 0000:00:13.1: OHCI controller state
ohci_hcd 0000:00:13.1: OHCI 1.0, NO legacy support registers
ohci_hcd 0000:00:13.1: control 0x083 HCFS=operational CBSR=3
ohci_hcd 0000:00:13.1: cmdstatus 0x00000 SOC=0
ohci_hcd 0000:00:13.1: intrstatus 0x00000004 SF
ohci_hcd 0000:00:13.1: intrenable 0x8000005a MIE RHSC UE RD WDH
ohci_hcd 0000:00:13.1: hcca frame #0005
ohci_hcd 0000:00:13.1: roothub.a 02000204 POTPGT=2 NPS NDP=4(4)
ohci_hcd 0000:00:13.1: roothub.b 00000000 PPCM=0000 DR=0000
ohci_hcd 0000:00:13.1: roothub.status 00008000 DRWE
ohci_hcd 0000:00:13.1: roothub.portstatus [0] 0x00010100 CSC PPS
ohci_hcd 0000:00:13.1: roothub.portstatus [1] 0x00000100 PPS
ohci_hcd 0000:00:13.1: roothub.portstatus [2] 0x00010100 CSC PPS
ohci_hcd 0000:00:13.1: roothub.portstatus [3] 0x00000100 PPS
usb usb3: default language 0x0409
usb usb3: uevent
usb usb3: usb_probe_device
usb usb3: configuration #1 chosen from 1 choice
usb usb3: adding 3-0:1.0 (config #1, interface 0)
usb 3-0:1.0: uevent
usb 3-0:1.0: uevent
hub 3-0:1.0: usb_probe_interface
hub 3-0:1.0: usb_probe_interface - got id
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
hub 3-0:1.0: standalone hub
hub 3-0:1.0: no power switching (usb 1.0)
hub 3-0:1.0: global over-current protection
hub 3-0:1.0: power on to power good time: 4ms
hub 3-0:1.0: local power source is good
hub 3-0:1.0: no over-current condition exists
hub 3-0:1.0: trying to enable port power on non-switchable hub
ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f9929613f0c]
usb 2-2: new full speed USB device using ohci_hcd and address 2 /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file '001'
usb usb3: new device found, idVendor=0000, idProduct=0000
usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.23-mm1 ohci_hcd
usb usb3: SerialNumber: 0000:00:13.1
ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS
usb 2-2: skipped 1 descriptor after interface
usb 2-2: default language 0x0409
usb 2-2: uevent
usb 2-2: usb_probe_device
usb 2-2: configuration #1 chosen from 1 choice
usb 2-2: adding 2-2:1.0 (config #1, interface 0)
usb 2-2:1.0: uevent
usb 2-2:1.0: uevent
usb 2-2: adding 2-2:1.1 (config #1, interface 1)
usb 2-2:1.1: uevent
usb 2-2:1.1: uevent
usb 2-2: adding 2-2:1.2 (config #1, interface 2)
usb 2-2:1.2: uevent
usb 2-2:1.2: uevent
usb 2-2: adding 2-2:1.3 (config #1, interface 3)
usb 2-2:1.3: uevent
usb 2-2:1.3: uevent
/home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file '002'
usb 2-2: new device found, idVendor=03f0, idProduct=171d
usb 2-2: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-2: Product: HP Integrated Module
usb 2-2: Manufacturer: Broadcom Corp
floppy0: no floppy controllers found
hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0044
ehci_hcd 0000:00:13.2: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT
hub 1-0:1.0: port 2, status 0501, change 0001, 480 Mb/s
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x501
Bluetooth: HCI USB driver ver 2.9
ehci_hcd 0000:00:13.2: port 2 full speed --> companion
ehci_hcd 0000:00:13.2: GetStatus port 2 status 003801 POWER OWNER sig=j CONNECT
hub 1-0:1.0: port 2 not reset yet, waiting 50ms
ehci_hcd 0000:00:13.2: GetStatus port 2 status 003002 POWER OWNER sig=se0 CSC
ehci_hcd 0000:00:13.2: GetStatus port 6 status 001403 POWER sig=k CSC CONNECT
hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:13.2: port 6 low speed --> companion
ehci_hcd 0000:00:13.2: GetStatus port 6 status 003002 POWER OWNER sig=se0 CSC
hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0004
hub 3-0:1.0: state 7 ports 4 chg 0000 evt 000a
ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [0] = 0x00010101 CSC PPS CCS
hci_usb 2-2:1.0: usb_probe_interface
hci_usb 2-2:1.0: usb_probe_interface - got id
hub 3-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
hci_usb 2-2:1.2: usb_probe_interface
hci_usb 2-2:1.2: usb_probe_interface - got id
hci_usb 2-2:1.3: usb_probe_interface
hci_usb 2-2:1.3: usb_probe_interface - got id
usbcore: registered new interface driver hci_usb
hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
usb 3-1: new full speed USB device using ohci_hcd and address 2
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
Bluetooth: RFCOMM socket layer initialized
usb 3-1: ep0 maxpacket = 8
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
usb 3-1: default language 0x0409
usb 3-1: uevent
usb 3-1: usb_probe_device
usb 3-1: configuration #1 chosen from 1 choice
usb 3-1: adding 3-1:1.0 (config #1, interface 0)
usb 3-1:1.0: uevent
usb 3-1:1.0: uevent
/home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file '002'
usb 3-1: new device found, idVendor=08ff, idProduct=2580
usb 3-1: new device strings: Mfr=0, Product=1, SerialNumber=0
usb 3-1: Product: Fingerprint Sensor
ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [2] = 0x00010301 CSC LSDA PPS CCS
hub 3-0:1.0: port 3, status 0301, change 0001, 1.5 Mb/s
hub 3-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x301
ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [2] = 0x00100303 PRSC LSDA PPS PES CCS
usb 3-3: new low speed USB device using ohci_hcd and address 3
ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [2] = 0x00100303 PRSC LSDA PPS PES CCS
usb 3-3: skipped 1 descriptor after interface
usb 3-3: skipped 1 descriptor after interface
usb 3-3: default language 0x0409
usb 3-3: uevent
usb 3-3: usb_probe_device
usb 3-3: configuration #1 chosen from 1 choice
usb 3-3: adding 3-3:1.0 (config #1, interface 0)
usb 3-3:1.0: uevent
usb 3-3:1.0: uevent
usb 3-3: adding 3-3:1.1 (config #1, interface 1)
usb 3-3:1.1: uevent
usb 3-3:1.1: uevent
/home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file '003'
usb 3-3: new device found, idVendor=046d, idProduct=c521
usb 3-3: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-3: Product: USB Receiver
usb 3-3: Manufacturer: Logitech
hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0040
hub 3-0:1.0: state 7 ports 4 chg 0000 evt 0000
usbcore: registered new interface driver hiddev
usbhid 3-3:1.0: usb_probe_interface
usbhid 3-3:1.0: usb_probe_interface - got id
input: Logitech USB Receiver as /class/input/input2
input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:13.1-3
usbhid 3-3:1.1: usb_probe_interface
usbhid 3-3:1.1: usb_probe_interface - got id
input: Logitech USB Receiver as /class/input/input3 /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/file.c: looking for a minor, starting at 96 input,hiddev96: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:13.1-3
usbcore: registered new interface driver usbhid /home/rafael/src/mm/linux-2.6.23-mm1/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04793/0x300000
serio: Synaptics pass-through port at isa0060/serio4/input0
input: SynPS/2 Synaptics TouchPad as /class/input/input4
device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: [email protected]
hub 1-0:1.0: hub_suspend
usb usb1: bus auto-suspend
ehci_hcd 0000:00:13.2: suspend root hub
loop: module loaded
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Floppy drive(s): fd0 is 1.44M
floppy0: no floppy controllers found
Adding 1052216k swap on /dev/sda1. Priority:-1 extents:1 across:1052216k
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ACPI: AC Adapter [C1BD] (on-line)
ACPI: Battery Slot [C1BF] (battery present)
ACPI: Battery Slot [C1BE] (battery absent)
input: Power Button (FF) as /class/input/input5
ACPI: Power Button (FF) [PWRF]
input: Sleep Button (CM) as /class/input/input6
ACPI: Sleep Button (CM) [C25A]
input: Lid Switch as /class/input/input7
ACPI: Lid Switch [C25B]
ACPI: Transitioning device [C34F] to D3
ACPI: Transitioning device [C34F] to D3
ACPI: Fan [C34F] (off)
ACPI: Transitioning device [C350] to D3
ACPI: Transitioning device [C350] to D3
ACPI: Fan [C350] (off)
ACPI: Transitioning device [C351] to D3
ACPI: Transitioning device [C351] to D3
ACPI: Fan [C351] (off)
ACPI: Transitioning device [C352] to D3
ACPI: Transitioning device [C352] to D3
ACPI: Fan [C352] (off)
ACPI: Processor [C000] (supports 8 throttling states)
ACPI: Processor [C001] (supports 8 throttling states)
ACPI: Thermal Zone [TZ1] (62 C)
ACPI: Thermal Zone [TZ2] (52 C)
ACPI: Thermal Zone [TZ3] (32 C)
powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-60 processors (2 cpu cores) (version 2.00.00)
powernow-k8:    0 : fid 0xc (2000 MHz), vid 0x13
powernow-k8:    1 : fid 0xa (1800 MHz), vid 0x15
powernow-k8:    2 : fid 0x8 (1600 MHz), vid 0x17
powernow-k8:    3 : fid 0x0 (800 MHz), vid 0x1e
powernow-k8: ph2 null fid transition 0xc
mtrr: no more MTRRs available
APIC error on CPU1: 00(40)
APIC error on CPU0: 00(40)
WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()

Call Trace:
 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
 [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2
 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
 [<ffffffff8024ee6d>] update_target+0x71/0x76
 [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2
 [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382
 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
 [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
 [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
 [<ffffffff80270cbe>] find_lock_page+0x2a/0xa6
 [<ffffffff80272bce>] filemap_fault+0x1d3/0x35b
 [<ffffffff80270bab>] unlock_page+0x2d/0x31
 [<ffffffff8027d6ec>] __do_fault+0x38e/0x3c4
 [<ffffffff8027ef6a>] handle_mm_fault+0x1f6/0x6e5
 [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
 [<ffffffff8024e56b>] up_read+0x9/0xb
 [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
 [<ffffffff802a0896>] do_ioctl+0x2a/0x77
 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
 [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
 [<ffffffff8020bfde>] system_call+0x7e/0x83
hda-intel: Invalid position buffer, using LPIB read method instead.
WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()

Call Trace:
 [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9
 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
 [<ffffffff8024ee6d>] update_target+0x71/0x76
 [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0
 [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382
 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
 [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
 [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
 [<ffffffff8022f18e>] default_wake_function+0x0/0xf
 [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
 [<ffffffff80282e91>] vma_link+0xdd/0x10b
 [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
 [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
 [<ffffffff802a0896>] do_ioctl+0x2a/0x77
 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
 [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
 [<ffffffff8020bfde>] system_call+0x7e/0x83

WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()

Call Trace:
 [<ffffffff8021b2b2>] smp_call_function_mask+0x6d/0x82
 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
 [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2
 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
 [<ffffffff8024ee6d>] update_target+0x71/0x76
 [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2
 [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382
 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
 [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
 [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
 [<ffffffff8022f18e>] default_wake_function+0x0/0xf
 [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
 [<ffffffff80282e91>] vma_link+0xdd/0x10b
 [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
 [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
 [<ffffffff802a0896>] do_ioctl+0x2a/0x77
 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
 [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
 [<ffffffff8020bfde>] system_call+0x7e/0x83

WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()

Call Trace:
 [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9
 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
 [<ffffffff8024ee6d>] update_target+0x71/0x76
 [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0
 [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382
 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
 [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
 [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
 [<ffffffff8022f18e>] default_wake_function+0x0/0xf
 [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
 [<ffffffff80282e91>] vma_link+0xdd/0x10b
 [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
 [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
 [<ffffffff802a0896>] do_ioctl+0x2a/0x77
 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
 [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
 [<ffffffff8020bfde>] system_call+0x7e/0x83

WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()

Call Trace:
 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
 [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2
 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
 [<ffffffff8024ee6d>] update_target+0x71/0x76
 [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2
 [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382
 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
 [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
 [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
 [<ffffffff8022f18e>] default_wake_function+0x0/0xf
 [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
 [<ffffffff80282e91>] vma_link+0xdd/0x10b
 [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
 [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
 [<ffffffff802a0896>] do_ioctl+0x2a/0x77
 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
 [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
 [<ffffffff8020bfde>] system_call+0x7e/0x83
ACPI: PCI interrupt for device 0000:30:00.0 disabled
bcm43xx driver
ACPI: PCI Interrupt 0000:30:00.0[A] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:30:00.0 to 64
bcm43xx: Chip ID 0x4311, rev 0x1
bcm43xx: Number of cores: 4
bcm43xx: Core 0: ID 0x800, rev 0x11, vendor 0x4243
bcm43xx: Core 1: ID 0x812, rev 0xa, vendor 0x4243
bcm43xx: Core 2: ID 0x817, rev 0x3, vendor 0x4243
bcm43xx: Core 3: ID 0x820, rev 0x1, vendor 0x4243
bcm43xx: PHY connected
bcm43xx: Detected PHY: Analog: 4, Type 2, Revision 8
bcm43xx: Detected Radio: ID: 2205017f (Manuf: 17f Ver: 2050 Rev: 2)
bcm43xx: Radio initialized
bcm43xx: Radio initialized
bcm43xx: PHY connected
bcm43xx: Microcode rev 0x127, pl 0xe (2005-04-18 02:36:27)
bcm43xx: Radio turned on
bcm43xx: Radio enabled by hardware
bcm43xx: Chip initialized
bcm43xx: 32-bit DMA initialized
bcm43xx: Keys cleared
bcm43xx: Selected 802.11 core (phytype 2)
ADDRCONF(NETDEV_UP): eth1: link is not ready
SoftMAC: Scanning finished: scanned 13 channels starting with channel 1
SoftMAC: Associate: Scanning for networks first.
SoftMAC: Scanning finished: scanned 13 channels starting with channel 1
SoftMAC: Queueing Authentication Request to 00:17:9a:f3:b5:75
SoftMAC: Cannot associate without being authenticated, requested authentication
SoftMAC: Sent Authentication Request to 00:17:9a:f3:b5:75.
SoftMAC: Open Authentication completed with 00:17:9a:f3:b5:75
SoftMAC: sent association request!
SoftMAC: associated!
ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
SFW2-OUT-ERROR IN= OUT=eth1 SRC=0000:0000:0000:0000:0000:0000:0000:0000 DST=ff02:0000:0000:0000:0000:0000:0000:0016 LEN=76 TC=0 HOPLIMIT=1 FLOWLBL=0 OPT ( ) PROTO=ICMPv6 TYPE=143 CODE=0
SoftMAC: Getting essid from req_essid
SFW2-OUT-ERROR IN= OUT=eth1 SRC=0000:0000:0000:0000:0000:0000:0000:0000 DST=ff02:0000:0000:0000:0000:0001:ffbe:9531 LEN=64 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=ICMPv6 TYPE=135 CODE=0
NET: Registered protocol family 17
SoftMAC: Getting essid from req_essid
SFW2-OUT-ERROR IN= OUT=eth1 SRC=fe80:0000:0000:0000:0214:a5ff:febe:9531 DST=ff02:0000:0000:0000:0000:0000:0000:0002 LEN=56 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=ICMPv6 TYPE=133 CODE=0
SoftMAC: Getting essid from req_essid
SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:17:9a:f3:b5:75:08:00 SRC=62.121.83.254 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=7883 PROTO=2
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SFW2-OUT-ERROR IN= OUT=eth1 SRC=fe80:0000:0000:0000:0214:a5ff:febe:9531 DST=ff02:0000:0000:0000:0000:0000:0000:0002 LEN=56 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=ICMPv6 TYPE=133 CODE=0
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SFW2-OUT-ERROR IN= OUT=eth1 SRC=fe80:0000:0000:0000:0214:a5ff:febe:9531 DST=ff02:0000:0000:0000:0000:0000:0000:0002 LEN=56 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=ICMPv6 TYPE=133 CODE=0 SFW2-OUT-ERROR IN= OUT=eth1 SRC=fe80:0000:0000:0000:0214:a5ff:febe:9531 DST=ff02:0000:0000:0000:0000:0000:0000:0016 LEN=76 TC=0 HOPLIMIT=1 FLOWLBL=0 OPT ( ) PROTO=ICMPv6 TYPE=143 CODE=0
SoftMAC: Getting essid from req_essid
eth1: no IPv6 routers present
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
bcm43xx: Radio initialized
bcm43xx: DMA-32 0x0200 (RX) max used slots: 1/64
bcm43xx: DMA-32 0x02A0 (TX) max used slots: 0/512
bcm43xx: DMA-32 0x0280 (TX) max used slots: 0/512
bcm43xx: DMA-32 0x0260 (TX) max used slots: 0/512
bcm43xx: DMA-32 0x0240 (TX) max used slots: 0/512
bcm43xx: DMA-32 0x0220 (TX) max used slots: 2/512
bcm43xx: DMA-32 0x0200 (TX) max used slots: 0/512
ACPI: PCI interrupt for device 0000:30:00.0 disabled
Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.00 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
PM: Entering mem sleep
Suspending device vcsa10
Suspending device vcs10
Suspending device vcsa4
Suspending device vcs4
Suspending device vcsa2
Suspending device vcs2
Suspending device vcsa6
Suspending device vcs6
Suspending device vcsa5
Suspending device vcs5
Suspending device vcsa3
Suspending device vcs3
Suspending device vcsa7
Suspending device vcs7
Suspending device audio
Suspending device dsp
Suspending device mixer
Suspending device event7
Suspending device input7
Suspending device event6
Suspending device input6
Suspending device event5
Suspending device input5
Suspending device seq
Suspending device C1BE
Suspending device C1BF
Suspending device C1BD
Suspending device device-mapper
Suspending device serio5
Suspending device event4
Suspending device mouse1
Suspending device input4
Suspending device hiddev0
Suspending device event3
Suspending device input3
Suspending device event2
Suspending device mouse0
Suspending device input2
Suspending device usbdev3.3
Suspending device usbdev3.3_ep82
Suspending device 3-3:1.1
Suspending device usbdev3.3_ep81
Suspending device 3-3:1.0
Suspending device usbdev3.3_ep00
Suspending device 3-3
usb 3-3: usb suspend
Suspending device usbdev3.2
Suspending device usbdev3.2_ep02
Suspending device usbdev3.2_ep81
Suspending device 3-1:1.0
Suspending device usbdev3.2_ep00
Suspending device 3-1
usb 3-1: usb suspend
Suspending device hci0
Suspending device usbdev2.2_ep03
Suspending device usbdev2.2_ep83
Suspending device bluetooth
Suspending device usbdev2.2
Suspending device 2-2:1.3
Suspending device usbdev2.2_ep04
Suspending device usbdev2.2_ep84
Suspending device 2-2:1.2
Suspending device 2-2:1.1
Suspending device usbdev2.2_ep02
Suspending device usbdev2.2_ep82
Suspending device usbdev2.2_ep81
Suspending device 2-2:1.0
Suspending device usbdev2.2_ep00
Suspending device 2-2
usb 2-2: usb suspend
Suspending device usbdev3.1
Suspending device usbdev3.1_ep81
Suspending device 00023f9929613f0c
Suspending device 00023f9929613f0c
Suspending device 3-0:1.0
Suspending device usbdev3.1_ep00
Suspending device usb3
hub 3-0:1.0: hub_suspend
usb usb3: bus suspend
ohci_hcd 0000:00:13.1: suspend root hub
Suspending device pcmcia_socket0
Suspending device usbdev2.1
Suspending device usbdev2.1_ep81
Suspending device 2-0:1.0
Suspending device usbdev2.1_ep00
Suspending device usb2
hub 2-0:1.0: hub_suspend
usb usb2: bus suspend
ohci_hcd 0000:00:13.0: suspend root hub
Suspending device hwmon0
Suspending device usbdev1.1
Suspending device usbdev1.1_ep81
Suspending device 1-0:1.0
Suspending device usbdev1.1_ep00
Suspending device usb1
Suspending device fw-host0
Suspending device fw-host0
Suspending device mmc0
Suspending device i2c-0
Suspending device eth0
Suspending device controlC0
Suspending device hwC0D0
Suspending device hwC0D1
Suspending device pcmC0D0c
Suspending device pcmC0D0p
Suspending device timer
Suspending device vcsa1
Suspending device vcs1
Suspending device 0.0
Suspending device ide0
Suspending device network_throughput
Suspending device network_latency
Suspending device cpu_dma_latency
Suspending device event1
Suspending device event0
Suspending device input1
Suspending device input0
Suspending device psaux
Suspending device mice
Suspending device serio4
Suspending device serio3
Suspending device serio2
Suspending device serio1
Suspending device serio0
Suspending device i8042
Suspending device 0:0:0:0
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
Suspending device target0:0:0
Suspending device host1
Suspending device host0
Suspending device ttyS3
Suspending device ttyS2
Suspending device ttyS1
Suspending device ttyS0
Suspending device serial8250
Suspending device nvram
Suspending device hpet
Suspending device rtc
Suspending device ttysf
Suspending device ttyse
Suspending device ttysd
Suspending device ttysc
Suspending device ttysb
Suspending device ttysa
Suspending device ttys9
Suspending device ttys8
Suspending device ttys7
Suspending device ttys6
Suspending device ttys5
Suspending device ttys4
Suspending device ttys3
Suspending device ttys2
Suspending device ttys1
Suspending device ttys0
Suspending device ttyrf
Suspending device ttyre
Suspending device ttyrd
Suspending device ttyrc
Suspending device ttyrb
Suspending device ttyra
Suspending device ttyr9
Suspending device ttyr8
Suspending device ttyr7
Suspending device ttyr6
Suspending device ttyr5
Suspending device ttyr4
Suspending device ttyr3
Suspending device ttyr2
Suspending device ttyr1
Suspending device ttyr0
Suspending device ttyqf
Suspending device ttyqe
Suspending device ttyqd
Suspending device ttyqc
Suspending device ttyqb
Suspending device ttyqa
Suspending device ttyq9
Suspending device ttyq8
Suspending device ttyq7
Suspending device ttyq6
Suspending device ttyq5
Suspending device ttyq4
Suspending device ttyq3
Suspending device ttyq2
Suspending device ttyq1
Suspending device ttyq0
Suspending device ttypf
Suspending device ttype
Suspending device ttypd
Suspending device ttypc
Suspending device ttypb
Suspending device ttypa
Suspending device ttyp9
Suspending device ttyp8
Suspending device ttyp7
Suspending device ttyp6
Suspending device ttyp5
Suspending device ttyp4
Suspending device ttyp3
Suspending device ttyp2
Suspending device ttyp1
Suspending device ttyp0
Suspending device ptysf
Suspending device ptyse
Suspending device ptysd
Suspending device ptysc
Suspending device ptysb
Suspending device ptysa
Suspending device ptys9
Suspending device ptys8
Suspending device ptys7
Suspending device ptys6
Suspending device ptys5
Suspending device ptys4
Suspending device ptys3
Suspending device ptys2
Suspending device ptys1
Suspending device ptys0
Suspending device ptyrf
Suspending device ptyre
Suspending device ptyrd
Suspending device ptyrc
Suspending device ptyrb
Suspending device ptyra
Suspending device ptyr9
Suspending device ptyr8
Suspending device ptyr7
Suspending device ptyr6
Suspending device ptyr5
Suspending device ptyr4
Suspending device ptyr3
Suspending device ptyr2
Suspending device ptyr1
Suspending device ptyr0
Suspending device ptyqf
Suspending device ptyqe
Suspending device ptyqd
Suspending device ptyqc
Suspending device ptyqb
Suspending device ptyqa
Suspending device ptyq9
Suspending device ptyq8
Suspending device ptyq7
Suspending device ptyq6
Suspending device ptyq5
Suspending device ptyq4
Suspending device ptyq3
Suspending device ptyq2
Suspending device ptyq1
Suspending device ptyq0
Suspending device ptypf
Suspending device ptype
Suspending device ptypd
Suspending device ptypc
Suspending device ptypb
Suspending device ptypa
Suspending device ptyp9
Suspending device ptyp8
Suspending device ptyp7
Suspending device ptyp6
Suspending device ptyp5
Suspending device ptyp4
Suspending device ptyp3
Suspending device ptyp2
Suspending device ptyp1
Suspending device ptyp0
Suspending device tty63
Suspending device tty62
Suspending device tty61
Suspending device tty60
Suspending device tty59
Suspending device tty58
Suspending device tty57
Suspending device tty56
Suspending device tty55
Suspending device tty54
Suspending device tty53
Suspending device tty52
Suspending device tty51
Suspending device tty50
Suspending device tty49
Suspending device tty48
Suspending device tty47
Suspending device tty46
Suspending device tty45
Suspending device tty44
Suspending device tty43
Suspending device tty42
Suspending device tty41
Suspending device tty40
Suspending device tty39
Suspending device tty38
Suspending device tty37
Suspending device tty36
Suspending device tty35
Suspending device tty34
Suspending device tty33
Suspending device tty32
Suspending device tty31
Suspending device tty30
Suspending device tty29
Suspending device tty28
Suspending device tty27
Suspending device tty26
Suspending device tty25
Suspending device tty24
Suspending device tty23
Suspending device tty22
Suspending device tty21
Suspending device tty20
Suspending device tty19
Suspending device tty18
Suspending device tty17
Suspending device tty16
Suspending device tty15
Suspending device tty14
Suspending device tty13
Suspending device tty12
Suspending device tty11
Suspending device tty10
Suspending device tty9
Suspending device tty8
Suspending device tty7
Suspending device tty6
Suspending device tty5
Suspending device tty4
Suspending device tty3
Suspending device tty2
Suspending device tty1
Suspending device vcsa
Suspending device vcs
Suspending device tty0
Suspending device ptmx
Suspending device console
Suspending device tty
Suspending device vtcon1
Suspending device fb0
Suspending device vesafb.0
Suspending device fbcon
Suspending device 0000:00:06.0:pcie03
Suspending device 0000:00:06.0:pcie01
Suspending device 0000:00:06.0:pcie00
Suspending device 0000:00:05.0:pcie03
Suspending device 0000:00:05.0:pcie01
Suspending device 0000:00:05.0:pcie00
Suspending device 0000:00:04.0:pcie03
Suspending device 0000:00:04.0:pcie01
Suspending device 0000:00:04.0:pcie00
Suspending device snapshot
Suspending device pcspkr
Suspending device mcelog
Suspending device lo
Suspending device kmsg
Suspending device urandom
Suspending device random
Suspending device full
Suspending device zero
Suspending device port
Suspending device null
Suspending device kmem
Suspending device mem
Suspending device 00:0c
ACPI handle has no context!
Suspending device 00:0b
Suspending device 00:0a
Suspending device 00:09
Suspending device 00:08
Suspending device 00:07
Suspending device 00:06
Suspending device 00:05
Suspending device 00:04
Suspending device 00:03
Suspending device 00:02
Suspending device 00:01
Suspending device 00:00
Suspending device pnp0
Suspending device 0000:02
Suspending device 0000:03
Suspending device 0000:02:04.3
ACPI handle has no context!
ACPI: PCI interrupt for device 0000:02:04.3 disabled
ACPI handle has no context!
Suspending device 0000:02:04.2
ACPI handle has no context!
ACPI: PCI interrupt for device 0000:02:04.2 disabled
ACPI handle has no context!
Suspending device 0000:02:04.1
ACPI handle has no context!
Suspending device 0000:02:04.0
Suspending device 0000:02:01.0
Suspending device 0000:30
Suspending device 0000:30:00.0
Suspending device 0000:20
Suspending device 0000:10
Suspending device 0000:01
Suspending device 0000:01:05.0
Suspending device 0000:00:18.3
Suspending device 0000:00:18.2
Suspending device 0000:00:18.1
Suspending device 0000:00:18.0
Suspending device 0000:00:14.4
Suspending device 0000:00:14.3
Suspending device 0000:00:14.2
ACPI: PCI interrupt for device 0000:00:14.2 disabled
Suspending device 0000:00:14.1
Suspending device 0000:00:14.0
Suspending device 0000:00:13.2
ACPI: PCI interrupt for device 0000:00:13.2 disabled
ehci_hcd 0000:00:13.2: --> PCI D3
Suspending device 0000:00:13.1
ACPI: PCI interrupt for device 0000:00:13.1 disabled
ohci_hcd 0000:00:13.1: --> PCI D0/legacy
Suspending device 0000:00:13.0
ACPI: PCI interrupt for device 0000:00:13.0 disabled
ohci_hcd 0000:00:13.0: --> PCI D0/legacy
Suspending device 0000:00:12.0
ACPI: PCI interrupt for device 0000:00:12.0 disabled
Suspending device 0000:00:06.0
Suspending device 0000:00:05.0
Suspending device 0000:00:04.0
Suspending device 0000:00:01.0
Suspending device 0000:00:00.0
Suspending device 0000:00
Suspending device pci0000:00
Suspending device LNXTHERM:03
Suspending device LNXTHERM:02
Suspending device LNXTHERM:01
Suspending device PNP0C0B:03
Suspending device PNP0C0B:02
ACPI: Transitioning device [C351] to D0
ACPI: Transitioning device [C351] to D0
Suspending device PNP0C0B:01
ACPI: Transitioning device [C350] to D0
ACPI: Transitioning device [C350] to D0
Suspending device PNP0C0B:00
ACPI: Transitioning device [C34F] to D0
ACPI: Transitioning device [C34F] to D0
Suspending device LNXPOWER:06
Suspending device LNXPOWER:05
Suspending device LNXPOWER:04
Suspending device LNXPOWER:03
Suspending device LNXTHERM:00
Suspending device PNP0C02:02
Suspending device PNP0C14:00
Suspending device PNP0C0D:00
Suspending device PNP0C0E:00
Suspending device ACPI0003:00
Suspending device PNP0C0A:01
Suspending device PNP0C0A:00
Suspending device HPQ0006:00
Suspending device PNP0C02:01
Suspending device device:49
Suspending device device:48
Suspending device device:47
Suspending device device:46
Suspending device device:45
Suspending device device:44
Suspending device device:43
Suspending device device:42
Suspending device device:41
Suspending device device:40
Suspending device device:3f
Suspending device device:3e
Suspending device device:3d
Suspending device device:3c
Suspending device device:3b
Suspending device device:3a
Suspending device device:39
Suspending device device:38
Suspending device device:37
Suspending device device:36
Suspending device device:35
Suspending device device:34
Suspending device device:33
Suspending device PNP0C0F:07
Suspending device PNP0C0F:06
Suspending device PNP0C0F:05
Suspending device PNP0C0F:04
Suspending device PNP0C0F:03
Suspending device PNP0C0F:02
Suspending device PNP0C0F:01
Suspending device PNP0C0F:00
Suspending device device:32
Suspending device device:31
Suspending device device:30
Suspending device device:2f
Suspending device device:2e
Suspending device device:2d
Suspending device device:2c
Suspending device device:2b
Suspending device device:2a
Suspending device device:29
Suspending device device:28
Suspending device device:27
Suspending device device:26
Suspending device device:25
Suspending device device:24
Suspending device device:23
Suspending device device:22
Suspending device device:21
Suspending device device:20
Suspending device device:1f
Suspending device device:1e
Suspending device device:1d
Suspending device device:1c
Suspending device device:1b
Suspending device device:1a
Suspending device device:19
Suspending device device:18
Suspending device device:17
Suspending device device:16
Suspending device device:15
Suspending device device:14
Suspending device device:13
Suspending device device:12
Suspending device device:11
Suspending device device:10
Suspending device PNP0C02:00
Suspending device PNP0000:00
Suspending device LNXPOWER:02
Suspending device SYN0118:00
Suspending device PNP0303:00
Suspending device PNP0B00:00
Suspending device PNP0800:00
Suspending device PNP0200:00
Suspending device PNP0100:00
Suspending device PNP0C04:00
Suspending device IFX0102:00
Suspending device LNXPOWER:01
Suspending device PNP0401:00
Suspending device PNP0A06:00
Suspending device PNP0C09:00
Suspending device device:0f
Suspending device device:0e
Suspending device LNXPOWER:00
Suspending device device:0d
Suspending device device:0c
Suspending device device:0b
Suspending device device:0a
Suspending device device:09
Suspending device device:08
Suspending device device:07
Suspending device device:06
Suspending device device:05
Suspending device device:04
Suspending device device:03
Suspending device device:02
Suspending device LNXVIDEO:00
Suspending device device:01
Suspending device PNP0A03:00
Suspending device PNP0C01:00
Suspending device device:00
Suspending device ACPI0007:01
Suspending device ACPI0007:00
Suspending device LNXPWRBN:00
Suspending device LNXSYSTM:00
Suspending device id
Suspending device vtcon0
Suspending device platform
Disabling non-boot CPUs ...
CPU0 attaching NULL sched-domain.
CPU1 attaching NULL sched-domain.
Cannot set affinity for irq 0
CPU 1 is now offline
SMP alternatives: switching to UP code
CPU0 attaching NULL sched-domain.
CPU1 is down
Extended CMOS year: 2000
hwsleep-0317 [00] enter_sleep_state : Entering sleep state [S3]
Back to C!
WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:427 smp_call_function_single()

Call Trace:
 [<ffffffff8022ecc6>] task_rq_lock+0x3d/0x6f
 [<ffffffff8021b51b>] smp_call_function_single+0x52/0xa0
 [<ffffffff80232f59>] set_cpus_allowed+0xbf/0xcc
 [<ffffffff80214c61>] sc_freq_event+0x71/0x75
 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
 [<ffffffff803c1b1d>] cpufreq_resume+0x131/0x157
 [<ffffffff80383128>] __sysdev_resume+0x34/0x4a
 [<ffffffff8038366e>] sysdev_resume+0x1f/0x61
 [<ffffffff80388050>] device_power_up+0x9/0x10
 [<ffffffff8025bba4>] suspend_devices_and_enter+0xbf/0xf7
 [<ffffffff8025bd3f>] enter_state+0x163/0x1e5
 [<ffffffff8025be65>] state_store+0xa4/0xc2
 [<ffffffff802d98a1>] subsys_attr_store+0x31/0x33
 [<ffffffff802d9ccd>] sysfs_write_file+0xe0/0x11c
 [<ffffffff80294d07>] vfs_write+0xc7/0x150
 [<ffffffff80295288>] sys_write+0x47/0x70
 [<ffffffff8020bfde>] system_call+0x7e/0x83
Extended CMOS year: 2000
Enabling non-boot CPUs ...
CPU0 attaching NULL sched-domain.
SMP alternatives: switching to SMP code
Booting processor 1/2 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 3990.28 BogoMIPS (lpj=7980574)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping 02
Machine check events logged
CPU0 attaching sched-domain:
domain 0: span 00000000,00000000,00000000,00000003
groups: 00000000,00000000,00000000,00000001 00000000,00000000,00000000,00000002
CPU1 attaching sched-domain:
domain 0: span 00000000,00000000,00000000,00000003
groups: 00000000,00000000,00000000,00000002 00000000,00000000,00000000,00000001
CPU1 is up
Clockevents: could not switch to one-shot mode: lapic is not functional.
Could not switch to high resolution mode on CPU 1
ACPI: Transitioning device [C34F] to D3
ACPI: Transitioning device [C34F] to D3
ACPI: Transitioning device [C350] to D3
ACPI: Transitioning device [C350] to D3
ACPI: Transitioning device [C351] to D3
ACPI: Transitioning device [C351] to D3
PM: Writing back config space on device 0000:00:01.0 at offset 7 (was 22206161, writing 2206161)
PM: Writing back config space on device 0000:00:04.0 at offset 9 (was 10001, writing 1fff1)
PM: Writing back config space on device 0000:00:04.0 at offset 8 (was 0, writing d3f0d000)
PM: Writing back config space on device 0000:00:04.0 at offset 7 (was 101, writing 5141)
PM: Writing back config space on device 0000:00:04.0 at offset 3 (was 10000, writing 10010)
PM: Writing back config space on device 0000:00:04.0 at offset 1 (was 100000, writing 100007)
PCI: Setting latency timer of device 0000:00:04.0 to 64
PM: Writing back config space on device 0000:00:05.0 at offset 9 (was 10001, writing 1fff1)
PM: Writing back config space on device 0000:00:05.0 at offset 8 (was 0, writing cff0cc00)
PM: Writing back config space on device 0000:00:05.0 at offset 7 (was 101, writing 3121)
PM: Writing back config space on device 0000:00:05.0 at offset 3 (was 10000, writing 10010)
PM: Writing back config space on device 0000:00:05.0 at offset 1 (was 100000, writing 100007)
PCI: Setting latency timer of device 0000:00:05.0 to 64
PM: Writing back config space on device 0000:00:06.0 at offset 9 (was 10001, writing 1fff1)
PM: Writing back config space on device 0000:00:06.0 at offset 8 (was 0, writing c800c800)
PM: Writing back config space on device 0000:00:06.0 at offset 7 (was 101, writing 1f1)
PM: Writing back config space on device 0000:00:06.0 at offset 3 (was 10000, writing 10010)
PM: Writing back config space on device 0000:00:06.0 at offset 1 (was 100000, writing 100007)
PCI: Setting latency timer of device 0000:00:06.0 to 64
PM: Writing back config space on device 0000:00:12.0 at offset f (was 100, writing 10a)
PM: Writing back config space on device 0000:00:12.0 at offset 3 (was 0, writing 4010)
ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 16 (level, low) -> IRQ 16
ohci_hcd 0000:00:13.0: PCI legacy resume
PCI: Enabling device 0000:00:13.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:13.0 to 64
PM: Writing back config space on device 0000:00:13.0 at offset f (was 100, writing 10b)
PM: Writing back config space on device 0000:00:13.0 at offset 4 (was 0, writing d4401000)
PM: Writing back config space on device 0000:00:13.0 at offset 3 (was 804000, writing 804010)
PM: Writing back config space on device 0000:00:13.0 at offset 1 (was 2b00006, writing 2b00007)
ohci_hcd 0000:00:13.1: PCI legacy resume
PCI: Enabling device 0000:00:13.1 (0000 -> 0002)
ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:13.1 to 64
PM: Writing back config space on device 0000:00:13.1 at offset f (was 100, writing 10b)
PM: Writing back config space on device 0000:00:13.1 at offset 4 (was 0, writing d4402000)
PM: Writing back config space on device 0000:00:13.1 at offset 1 (was 2b00006, writing 2b00007)
ehci_hcd 0000:00:13.2: PCI D0, from previous PCI D3
ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:13.2 to 64
PM: Writing back config space on device 0000:00:13.2 at offset f (was 100, writing 10b)
ehci_hcd 0000:00:13.2: lost power, restarting
usb usb1: root hub lost power or was reset
ehci_hcd 0000:00:13.2: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
ehci_hcd 0000:00:13.2: MWI active
PM: Writing back config space on device 0000:00:14.1 at offset f (was 100, writing 10a)
PM: Writing back config space on device 0000:00:14.1 at offset 8 (was 1, writing 7041)
PM: Writing back config space on device 0000:00:14.1 at offset 3 (was 0, writing 4010)
PM: Writing back config space on device 0000:00:14.1 at offset 1 (was 2300000, writing 2300005)
ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16
PM: Writing back config space on device 0000:00:14.2 at offset f (was 10a, writing a)
PM: Writing back config space on device 0000:00:14.2 at offset 1 (was 4100000, writing 4100002)
ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16
PM: Writing back config space on device 0000:00:14.4 at offset 3 (was 816000, writing 814000)
PM: Writing back config space on device 0000:30:00.0 at offset f (was 100, writing 10a)
PM: Writing back config space on device 0000:30:00.0 at offset 4 (was 0, writing c8000000)
PM: Writing back config space on device 0000:30:00.0 at offset 3 (was 0, writing 10)
PM: Writing back config space on device 0000:30:00.0 at offset 1 (was 100000, writing 100003)
PM: Writing back config space on device 0000:02:01.0 at offset 3 (was 0, writing 4010)
PM: Writing back config space on device 0000:02:01.0 at offset 1 (was 2b00000, writing 2b00006)
PM: Writing back config space on device 0000:02:04.0 at offset f (was 34001ff, writing 5c0010a)
PM: Writing back config space on device 0000:02:04.0 at offset e (was 0, writing 14fc)
PM: Writing back config space on device 0000:02:04.0 at offset d (was 0, writing 1400)
PM: Writing back config space on device 0000:02:04.0 at offset c (was 0, writing 10fc)
PM: Writing back config space on device 0000:02:04.0 at offset b (was 0, writing 1000)
PM: Writing back config space on device 0000:02:04.0 at offset a (was 0, writing 93fff000)
PM: Writing back config space on device 0000:02:04.0 at offset 9 (was 0, writing 90000000)
PM: Writing back config space on device 0000:02:04.0 at offset 8 (was 0, writing 8ffff000)
PM: Writing back config space on device 0000:02:04.0 at offset 7 (was 0, writing 8c000000)
PM: Writing back config space on device 0000:02:04.0 at offset 6 (was 0, writing b0060302)
PM: Writing back config space on device 0000:02:04.0 at offset 4 (was 0, writing d4010000)
PM: Writing back config space on device 0000:02:04.0 at offset 3 (was 820000, writing 82a810)
PM: Writing back config space on device 0000:02:04.0 at offset 1 (was 2100000, writing 2100007)
PM: Writing back config space on device 0000:02:04.1 at offset f (was 4020100, writing 402010a)
PM: Writing back config space on device 0000:02:04.1 at offset 5 (was 0, writing d4014000)
PM: Writing back config space on device 0000:02:04.1 at offset 4 (was 0, writing d4011000)
PM: Writing back config space on device 0000:02:04.1 at offset 3 (was 800000, writing 804010)
PM: Writing back config space on device 0000:02:04.1 at offset 1 (was 2100000, writing 2100006)
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[d4011000-d40117ff] Max Packet=[2048] IR/IT contexts=[4/8]
PM: Writing back config space on device 0000:02:04.2 at offset f (was 40701ff, writing 407010a)
PM: Writing back config space on device 0000:02:04.2 at offset 4 (was 0, writing d4018000)
PM: Writing back config space on device 0000:02:04.2 at offset 3 (was 800000, writing 804010)
PM: Writing back config space on device 0000:02:04.2 at offset 1 (was 2100000, writing 2100006)
ACPI: PCI Interrupt 0000:02:04.2[A] -> GSI 20 (level, low) -> IRQ 20
PM: Writing back config space on device 0000:02:04.3 at offset f (was 40701ff, writing 407010a)
PM: Writing back config space on device 0000:02:04.3 at offset 4 (was 0, writing d4019000)
PM: Writing back config space on device 0000:02:04.3 at offset 3 (was 800000, writing 804010)
PM: Writing back config space on device 0000:02:04.3 at offset 1 (was 2100000, writing 2100006)
ACPI: PCI Interrupt 0000:02:04.3[A] -> GSI 20 (level, low) -> IRQ 20
sd 0:0:0:0: [sda] Starting disk
ata2: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: configured for UDMA/100
sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: selected mode 0x22
usb usb1: usb resume
ehci_hcd 0000:00:13.2: resume root hub after power loss
hub 1-0:1.0: trying to enable port power on non-switchable hub
usb usb2: usb resume
ohci_hcd 0000:00:13.0: lost power
ohci_hcd 0000:00:13.0: OHCI controller state
ohci_hcd 0000:00:13.0: OHCI 1.0, NO legacy support registers
ohci_hcd 0000:00:13.0: control 0x083 HCFS=operational CBSR=3
ohci_hcd 0000:00:13.0: cmdstatus 0x00000 SOC=0
ohci_hcd 0000:00:13.0: intrstatus 0x00000004 SF
ohci_hcd 0000:00:13.0: intrenable 0x8000005a MIE RHSC UE RD WDH
ohci_hcd 0000:00:13.0: hcca frame #0005
ohci_hcd 0000:00:13.0: roothub.a 02000204 POTPGT=2 NPS NDP=4(4)
ohci_hcd 0000:00:13.0: roothub.b 00000000 PPCM=0000 DR=0000
ohci_hcd 0000:00:13.0: roothub.status 00008000 DRWE
ohci_hcd 0000:00:13.0: roothub.portstatus [0] 0x00000100 PPS
ohci_hcd 0000:00:13.0: roothub.portstatus [1] 0x00000100 PPS
ohci_hcd 0000:00:13.0: roothub.portstatus [2] 0x00000100 PPS
ohci_hcd 0000:00:13.0: roothub.portstatus [3] 0x00000100 PPS
ohci_hcd 0000:00:13.0: restart complete
usb usb2: root hub lost power or was reset
hub 2-0:1.0: trying to enable port power on non-switchable hub
hub 2-0:1.0: logical disconnect on port 2
usb usb3: usb resume
ohci_hcd 0000:00:13.1: lost power
ohci_hcd 0000:00:13.1: OHCI controller state
ohci_hcd 0000:00:13.1: OHCI 1.0, NO legacy support registers
ohci_hcd 0000:00:13.1: control 0x083 HCFS=operational CBSR=3
ohci_hcd 0000:00:13.1: cmdstatus 0x00000 SOC=0
ohci_hcd 0000:00:13.1: intrstatus 0x00000004 SF
ohci_hcd 0000:00:13.1: intrenable 0x8000005a MIE RHSC UE RD WDH
ohci_hcd 0000:00:13.1: hcca frame #000b
ohci_hcd 0000:00:13.1: roothub.a 02000204 POTPGT=2 NPS NDP=4(4)
ohci_hcd 0000:00:13.1: roothub.b 00000000 PPCM=0000 DR=0000
ohci_hcd 0000:00:13.1: roothub.status 00008000 DRWE
ohci_hcd 0000:00:13.1: roothub.portstatus [0] 0x00000100 PPS
ohci_hcd 0000:00:13.1: roothub.portstatus [1] 0x00000100 PPS
ohci_hcd 0000:00:13.1: roothub.portstatus [2] 0x00000100 PPS
ohci_hcd 0000:00:13.1: roothub.portstatus [3] 0x00000100 PPS
ohci_hcd 0000:00:13.1: restart complete
usb usb3: root hub lost power or was reset
hub 3-0:1.0: trying to enable port power on non-switchable hub
hub 3-0:1.0: logical disconnect on port 1
hub 3-0:1.0: logical disconnect on port 3
PM: Finishing wakeup.
Restarting tasks ... done.
hub 1-0:1.0: state 7 ports 8 chg 0000 evt 004c
ehci_hcd 0000:00:13.2: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT
hub 1-0:1.0: port 2, status 0501, change 0001, 480 Mb/s
hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:13.2: port 2 full speed --> companion
ehci_hcd 0000:00:13.2: GetStatus port 2 status 003801 POWER OWNER sig=j CONNECT
hub 1-0:1.0: port 2 not reset yet, waiting 50ms
ehci_hcd 0000:00:13.2: GetStatus port 2 status 003002 POWER OWNER sig=se0 CSC
ehci_hcd 0000:00:13.2: GetStatus port 3 status 001803 POWER sig=j CSC CONNECT
hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s
hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:13.2: port 3 full speed --> companion
ehci_hcd 0000:00:13.2: GetStatus port 3 status 003801 POWER OWNER sig=j CONNECT
hub 1-0:1.0: port 3 not reset yet, waiting 50ms
ehci_hcd 0000:00:13.2: GetStatus port 3 status 003002 POWER OWNER sig=se0 CSC
ehci_hcd 0000:00:13.2: GetStatus port 6 status 001403 POWER sig=k CSC CONNECT
hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:13.2: port 6 low speed --> companion
ehci_hcd 0000:00:13.2: GetStatus port 6 status 003002 POWER OWNER sig=se0 CSC
hub 2-0:1.0: state 7 ports 4 chg 0004 evt 0004
ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [1] = 0x00010101 CSC PPS CCS
hub 2-0:1.0: port 2, status 0101, change 0001, 12 Mb/s
usb 2-2: USB disconnect, address 2
usb 2-2: unregistering device
usb 2-2: usb_disable_device nuking all URBs
usb 2-2: unregistering interface 2-2:1.0
usb 2-2:1.0: uevent
usb 2-2:1.0: uevent
usb 2-2: unregistering interface 2-2:1.1
usb 2-2:1.1: uevent
usb 2-2:1.1: uevent
usb 2-2: unregistering interface 2-2:1.2
usb 2-2:1.2: uevent
usb 2-2:1.2: uevent
usb 2-2: unregistering interface 2-2:1.3
usb 2-2:1.3: uevent
usb 2-2:1.3: uevent
usb 2-2: uevent
hub 2-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101
ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS
usb 2-2: new full speed USB device using ohci_hcd and address 3
ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS
usb 2-2: skipped 1 descriptor after interface
usb 2-2: default language 0x0409
usb 2-2: uevent
usb 2-2: usb_probe_device
usb 2-2: configuration #1 chosen from 1 choice
usb 2-2: adding 2-2:1.0 (config #1, interface 0)
usb 2-2:1.0: uevent
usb 2-2:1.0: uevent
hci_usb 2-2:1.0: usb_probe_interface
hci_usb 2-2:1.0: usb_probe_interface - got id
usb 2-2: adding 2-2:1.1 (config #1, interface 1)
usb 2-2:1.1: uevent
usb 2-2:1.1: uevent
usb 2-2: adding 2-2:1.2 (config #1, interface 2)
usb 2-2:1.2: uevent
usb 2-2:1.2: uevent
hci_usb 2-2:1.2: usb_probe_interface
hci_usb 2-2:1.2: usb_probe_interface - got id
usb 2-2: adding 2-2:1.3 (config #1, interface 3)
usb 2-2:1.3: uevent
usb 2-2:1.3: uevent
hci_usb 2-2:1.3: usb_probe_interface
hci_usb 2-2:1.3: usb_probe_interface - got id
/home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file '003'
usb 2-2: new device found, idVendor=03f0, idProduct=171d
usb 2-2: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-2: Product: HP Integrated Module
usb 2-2: Manufacturer: Broadcom Corp
hub 3-0:1.0: state 7 ports 4 chg 000a evt 000a
ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [0] = 0x00010101 CSC PPS CCS
hub 3-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
usb 3-1: USB disconnect, address 2
usb 3-1: unregistering device
usb 3-1: usb_disable_device nuking all URBs
usb 3-1: unregistering interface 3-1:1.0
usb 3-1:1.0: uevent
usb 3-1:1.0: uevent
usb 3-1: uevent
hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
usb 3-1: new full speed USB device using ohci_hcd and address 4
ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
usb 3-1: ep0 maxpacket = 8
usb 3-1: default language 0x0409
usb 3-1: uevent
usb 3-1: usb_probe_device
usb 3-1: configuration #1 chosen from 1 choice
usb 3-1: adding 3-1:1.0 (config #1, interface 0)
usb 3-1:1.0: uevent
usb 3-1:1.0: uevent
/home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file '004'
usb 3-1: new device found, idVendor=08ff, idProduct=2580
usb 3-1: new device strings: Mfr=0, Product=1, SerialNumber=0
usb 3-1: Product: Fingerprint Sensor
ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [2] = 0x00010301 CSC LSDA PPS CCS
hub 3-0:1.0: port 3, status 0301, change 0001, 1.5 Mb/s
usb 3-3: USB disconnect, address 3
usb 3-3: unregistering device
usb 3-3: usb_disable_device nuking all URBs
usb 3-3: unregistering interface 3-3:1.0
usb 3-3:1.0: uevent
usb 3-3:1.0: uevent
usb 3-3: unregistering interface 3-3:1.1
/home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/file.c: removing 96 minor
usb 3-3:1.1: uevent
usb 3-3:1.1: uevent
usb 3-3: uevent
hub 3-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x301
ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [2] = 0x00100303 PRSC LSDA PPS PES CCS
usb 3-3: new low speed USB device using ohci_hcd and address 5
ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [2] = 0x00100303 PRSC LSDA PPS PES CCS
usb 3-3: skipped 1 descriptor after interface
usb 3-3: skipped 1 descriptor after interface
usb 3-3: default language 0x0409
usb 3-3: uevent
usb 3-3: usb_probe_device
usb 3-3: configuration #1 chosen from 1 choice
usb 3-3: adding 3-3:1.0 (config #1, interface 0)
usb 3-3:1.0: uevent
usb 3-3:1.0: uevent
usbhid 3-3:1.0: usb_probe_interface
usbhid 3-3:1.0: usb_probe_interface - got id
input: Logitech USB Receiver as /class/input/input8
input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:13.1-3
usb 3-3: adding 3-3:1.1 (config #1, interface 1)
usb 3-3:1.1: uevent
usb 3-3:1.1: uevent
usbhid 3-3:1.1: usb_probe_interface
usbhid 3-3:1.1: usb_probe_interface - got id
input: Logitech USB Receiver as /class/input/input9
/home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/file.c: looking for a minor, starting at 96
input,hiddev96: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:13.1-3
/home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file '005'
usb 3-3: new device found, idVendor=046d, idProduct=c521
usb 3-3: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-3: Product: USB Receiver
usb 3-3: Manufacturer: Logitech
hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0040
hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0004
hub 3-0:1.0: state 7 ports 4 chg 0000 evt 0008
hub 1-0:1.0: hub_suspend
usb usb1: bus auto-suspend
ehci_hcd 0000:00:13.2: suspend root hub
bcm43xx driver
ACPI: PCI Interrupt 0000:30:00.0[A] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:30:00.0 to 64
bcm43xx: Chip ID 0x4311, rev 0x1
bcm43xx: Number of cores: 4
bcm43xx: Core 0: ID 0x800, rev 0x11, vendor 0x4243
bcm43xx: Core 1: ID 0x812, rev 0xa, vendor 0x4243
bcm43xx: Core 2: ID 0x817, rev 0x3, vendor 0x4243
bcm43xx: Core 3: ID 0x820, rev 0x1, vendor 0x4243
bcm43xx: PHY connected
bcm43xx: Detected PHY: Analog: 4, Type 2, Revision 8
bcm43xx: Detected Radio: ID: 2205017f (Manuf: 17f Ver: 2050 Rev: 2)
bcm43xx: Radio initialized
bcm43xx: Radio initialized
bcm43xx: PHY connected
bcm43xx: Microcode rev 0x127, pl 0xe (2005-04-18 02:36:27)
bcm43xx: Radio turned on
bcm43xx: Radio enabled by hardware
bcm43xx: Chip initialized
bcm43xx: 32-bit DMA initialized
bcm43xx: Keys cleared
bcm43xx: Selected 802.11 core (phytype 2)
ADDRCONF(NETDEV_UP): eth1: link is not ready
SoftMAC: Scanning finished: scanned 13 channels starting with channel 1
SoftMAC: Associate: Scanning for networks first.
SoftMAC: Scanning finished: scanned 13 channels starting with channel 1
SoftMAC: Queueing Authentication Request to 00:17:9a:f3:b5:75
SoftMAC: Cannot associate without being authenticated, requested authentication
SoftMAC: Sent Authentication Request to 00:17:9a:f3:b5:75.
SoftMAC: Open Authentication completed with 00:17:9a:f3:b5:75
SoftMAC: sent association request!
SoftMAC: associated!
ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
SFW2-OUT-ERROR IN= OUT=eth1 SRC=0000:0000:0000:0000:0000:0000:0000:0000 DST=ff02:0000:0000:0000:0000:0000:0000:0016 LEN=76 TC=0 HOPLIMIT=1 FLOWLBL=0 OPT ( ) PROTO=ICMPv6 TYPE=143 CODE=0
SoftMAC: Getting essid from req_essid
SFW2-OUT-ERROR IN= OUT=eth1 SRC=0000:0000:0000:0000:0000:0000:0000:0000 DST=ff02:0000:0000:0000:0000:0001:ffbe:9531 LEN=64 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=ICMPv6 TYPE=135 CODE=0
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SFW2-OUT-ERROR IN= OUT=eth1 SRC=fe80:0000:0000:0000:0214:a5ff:febe:9531 DST=ff02:0000:0000:0000:0000:0000:0000:0002 LEN=56 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=ICMPv6 TYPE=133 CODE=0
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SFW2-OUT-ERROR IN= OUT=eth1 SRC=fe80:0000:0000:0000:0214:a5ff:febe:9531 DST=ff02:0000:0000:0000:0000:0000:0000:0002 LEN=56 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=ICMPv6 TYPE=133 CODE=0
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SFW2-OUT-ERROR IN= OUT=eth1 SRC=fe80:0000:0000:0000:0214:a5ff:febe:9531 DST=ff02:0000:0000:0000:0000:0000:0000:0016 LEN=76 TC=0 HOPLIMIT=1 FLOWLBL=0 OPT ( ) PROTO=ICMPv6 TYPE=143 CODE=0
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SFW2-OUT-ERROR IN= OUT=eth1 SRC=fe80:0000:0000:0000:0214:a5ff:febe:9531 DST=ff02:0000:0000:0000:0000:0000:0000:0002 LEN=56 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=ICMPv6 TYPE=133 CODE=0
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
eth1: no IPv6 routers present
WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()

Call Trace:
 [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9
 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
 [<ffffffff8024ee6d>] update_target+0x71/0x76
 [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0
 [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382
 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
 [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
 [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
 [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
 [<ffffffff80282e91>] vma_link+0xdd/0x10b
 [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
 [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
 [<ffffffff802a0896>] do_ioctl+0x2a/0x77
 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
 [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
 [<ffffffff8020bfde>] system_call+0x7e/0x83

WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()

Call Trace:
 [<ffffffff8021b2b2>] smp_call_function_mask+0x6d/0x82
 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
 [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2
 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
 [<ffffffff8024ee6d>] update_target+0x71/0x76
 [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2
 [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382
 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
 [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
 [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
 [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
 [<ffffffff80282e91>] vma_link+0xdd/0x10b
 [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
 [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
 [<ffffffff802a0896>] do_ioctl+0x2a/0x77
 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
 [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
 [<ffffffff8020bfde>] system_call+0x7e/0x83
SoftMAC: Getting essid from req_essid
WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()

Call Trace:
 [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9
 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
 [<ffffffff8024ee6d>] update_target+0x71/0x76
 [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0
 [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382
 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
 [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
 [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
 [<ffffffff8022f18e>] default_wake_function+0x0/0xf
 [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
 [<ffffffff80282e91>] vma_link+0xdd/0x10b
 [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
 [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
 [<ffffffff802a0896>] do_ioctl+0x2a/0x77
 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
 [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
 [<ffffffff8020bfde>] system_call+0x7e/0x83

WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()

Call Trace:
 [<ffffffff8021b2b2>] smp_call_function_mask+0x6d/0x82
 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
 [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2
 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
 [<ffffffff8024ee6d>] update_target+0x71/0x76
 [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2
 [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382
 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
 [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
 [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
 [<ffffffff8022f18e>] default_wake_function+0x0/0xf
 [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
 [<ffffffff80282e91>] vma_link+0xdd/0x10b
 [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
 [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
 [<ffffffff802a0896>] do_ioctl+0x2a/0x77
 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
 [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
 [<ffffffff8020bfde>] system_call+0x7e/0x83
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()

Call Trace:
 [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9
 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
 [<ffffffff8024ee6d>] update_target+0x71/0x76
 [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0
 [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382
 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
 [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
 [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
 [<ffffffff8022f18e>] default_wake_function+0x0/0xf
 [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
 [<ffffffff80282e91>] vma_link+0xdd/0x10b
 [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
 [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
 [<ffffffff802a0896>] do_ioctl+0x2a/0x77
 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
 [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
 [<ffffffff8020bfde>] system_call+0x7e/0x83

WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()

Call Trace:
 [<ffffffff8021b2b2>] smp_call_function_mask+0x6d/0x82
 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
 [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2
 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
 [<ffffffff8024ee6d>] update_target+0x71/0x76
 [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2
 [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382
 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
 [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
 [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
 [<ffffffff8022f18e>] default_wake_function+0x0/0xf
 [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
 [<ffffffff80282e91>] vma_link+0xdd/0x10b
 [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
 [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
 [<ffffffff802a0896>] do_ioctl+0x2a/0x77
 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
 [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
 [<ffffffff8020bfde>] system_call+0x7e/0x83
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()

Call Trace:
 [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9
 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
 [<ffffffff8024ee6d>] update_target+0x71/0x76
 [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0
 [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382
 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
 [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
 [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
 [<ffffffff8022f18e>] default_wake_function+0x0/0xf
 [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
 [<ffffffff80282e91>] vma_link+0xdd/0x10b
 [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
 [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
 [<ffffffff802a0896>] do_ioctl+0x2a/0x77
 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
 [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
 [<ffffffff8020bfde>] system_call+0x7e/0x83

WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()

Call Trace:
 [<ffffffff8021b2b2>] smp_call_function_mask+0x6d/0x82
 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
 [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2
 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
 [<ffffffff8024ee6d>] update_target+0x71/0x76
 [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2
 [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382
 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
 [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
 [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
 [<ffffffff8022f18e>] default_wake_function+0x0/0xf
 [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
 [<ffffffff80282e91>] vma_link+0xdd/0x10b
 [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
 [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
 [<ffffffff802a0896>] do_ioctl+0x2a/0x77
 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
 [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
 [<ffffffff8020bfde>] system_call+0x7e/0x83
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
bcm43xx: Radio initialized
bcm43xx: DMA-32 0x0200 (RX) max used slots: 1/64
bcm43xx: DMA-32 0x02A0 (TX) max used slots: 0/512
bcm43xx: DMA-32 0x0280 (TX) max used slots: 0/512
bcm43xx: DMA-32 0x0260 (TX) max used slots: 0/512
bcm43xx: DMA-32 0x0240 (TX) max used slots: 0/512
bcm43xx: DMA-32 0x0220 (TX) max used slots: 2/512
bcm43xx: DMA-32 0x0200 (TX) max used slots: 0/512
ACPI: PCI interrupt for device 0000:30:00.0 disabled
swsusp: Marking nosave pages: 000000000009f000 - 0000000000100000
swsusp: Basic memory bitmaps created
Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.00 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.19 seconds) done.
Shrinking memory... -\done (15072 pages freed)
Freed 60288 kbytes in 0.22 seconds (274.03 MB/s)
Suspending device vcsa8
Suspending device vcs8
Suspending device vcsa10
Suspending device vcs10
Suspending device usbdev3.5
Suspending device usbdev3.5_ep82
Suspending device hiddev0
Suspending device event3
Suspending device input9
Suspending device 3-3:1.1
Suspending device usbdev3.5_ep81
Suspending device event2
Suspending device mouse0
Suspending device input8
Suspending device 3-3:1.0
Suspending device usbdev3.5_ep00
Suspending device 3-3
Suspending device usbdev3.4
Suspending device usbdev3.4_ep02
Suspending device usbdev3.4_ep81
Suspending device 3-1:1.0
Suspending device usbdev3.4_ep00
Suspending device 3-1
Suspending device usbdev2.3
Suspending device 2-2:1.3
Suspending device usbdev2.3_ep04
Suspending device usbdev2.3_ep84
Suspending device 2-2:1.2
Suspending device usbdev2.3_ep03
Suspending device usbdev2.3_ep83
Suspending device 2-2:1.1
Suspending device usbdev2.3_ep02
Suspending device usbdev2.3_ep82
Suspending device usbdev2.3_ep81
Suspending device hci0
Suspending device 2-2:1.0
Suspending device usbdev2.3_ep00
Suspending device 2-2
Suspending device vcsa4
Suspending device vcs4
Suspending device vcsa2
Suspending device vcs2
Suspending device vcsa6
Suspending device vcs6
Suspending device vcsa5
Suspending device vcs5
Suspending device vcsa3
Suspending device vcs3
Suspending device vcsa7
Suspending device vcs7
Suspending device audio
Suspending device dsp
Suspending device mixer
Suspending device event7
Suspending device input7
Suspending device event6
Suspending device input6
Suspending device event5
Suspending device input5
Suspending device seq
Suspending device C1BE
Suspending device C1BF
Suspending device C1BD
Suspending device device-mapper
Suspending device serio5
Suspending device event4
Suspending device mouse1
Suspending device input4
Suspending device bluetooth
Suspending device usbdev3.1
Suspending device usbdev3.1_ep81
Suspending device 00023f9929613f0c
Suspending device 00023f9929613f0c
Suspending device 3-0:1.0
Suspending device usbdev3.1_ep00
Suspending device usb3
hub 3-0:1.0: hub_suspend
usb usb3: bus suspend
ohci_hcd 0000:00:13.1: suspend root hub
Suspending device pcmcia_socket0
Suspending device usbdev2.1
Suspending device usbdev2.1_ep81
Suspending device 2-0:1.0
Suspending device usbdev2.1_ep00
Suspending device usb2
hub 2-0:1.0: hub_suspend
usb usb2: bus suspend
ohci_hcd 0000:00:13.0: suspend root hub
Suspending device hwmon0
Suspending device usbdev1.1
Suspending device usbdev1.1_ep81
Suspending device 1-0:1.0
Suspending device usbdev1.1_ep00
Suspending device usb1
Suspending device fw-host0
Suspending device fw-host0
Suspending device mmc0
Suspending device i2c-0
Suspending device eth0
Suspending device controlC0
Suspending device hwC0D0
Suspending device hwC0D1
Suspending device pcmC0D0c
Suspending device pcmC0D0p
Suspending device timer
Suspending device vcsa1
Suspending device vcs1
Suspending device 0.0
Suspending device ide0
Suspending device network_throughput
Suspending device network_latency
Suspending device cpu_dma_latency
Suspending device event1
Suspending device event0
Suspending device input1
Suspending device input0
Suspending device psaux
Suspending device mice
Suspending device serio4
Suspending device serio3
Suspending device serio2
Suspending device serio1
Suspending device serio0
Suspending device i8042
Suspending device 0:0:0:0
sd 0:0:0:0: [sda] Synchronizing SCSI cache
Suspending device target0:0:0
Suspending device host1
Suspending device host0
Suspending device ttyS3
Suspending device ttyS2
Suspending device ttyS1
Suspending device ttyS0
Suspending device serial8250
Suspending device nvram
Suspending device hpet
Suspending device rtc
Suspending device ttysf
Suspending device ttyse
Suspending device ttysd
Suspending device ttysc
Suspending device ttysb
Suspending device ttysa
Suspending device ttys9
Suspending device ttys8
Suspending device ttys7
Suspending device ttys6
Suspending device ttys5
Suspending device ttys4
Suspending device ttys3
Suspending device ttys2
Suspending device ttys1
Suspending device ttys0
Suspending device ttyrf
Suspending device ttyre
Suspending device ttyrd
Suspending device ttyrc
Suspending device ttyrb
Suspending device ttyra
Suspending device ttyr9
Suspending device ttyr8
Suspending device ttyr7
Suspending device ttyr6
Suspending device ttyr5
Suspending device ttyr4
Suspending device ttyr3
Suspending device ttyr2
Suspending device ttyr1
Suspending device ttyr0
Suspending device ttyqf
Suspending device ttyqe
Suspending device ttyqd
Suspending device ttyqc
Suspending device ttyqb
Suspending device ttyqa
Suspending device ttyq9
Suspending device ttyq8
Suspending device ttyq7
Suspending device ttyq6
Suspending device ttyq5
Suspending device ttyq4
Suspending device ttyq3
Suspending device ttyq2
Suspending device ttyq1
Suspending device ttyq0
Suspending device ttypf
Suspending device ttype
Suspending device ttypd
Suspending device ttypc
Suspending device ttypb
Suspending device ttypa
Suspending device ttyp9
Suspending device ttyp8
Suspending device ttyp7
Suspending device ttyp6
Suspending device ttyp5
Suspending device ttyp4
Suspending device ttyp3
Suspending device ttyp2
Suspending device ttyp1
Suspending device ttyp0
Suspending device ptysf
Suspending device ptyse
Suspending device ptysd
Suspending device ptysc
Suspending device ptysb
Suspending device ptysa
Suspending device ptys9
Suspending device ptys8
Suspending device ptys7
Suspending device ptys6
Suspending device ptys5
Suspending device ptys4
Suspending device ptys3
Suspending device ptys2
Suspending device ptys1
Suspending device ptys0
Suspending device ptyrf
Suspending device ptyre
Suspending device ptyrd
Suspending device ptyrc
Suspending device ptyrb
Suspending device ptyra
Suspending device ptyr9
Suspending device ptyr8
Suspending device ptyr7
Suspending device ptyr6
Suspending device ptyr5
Suspending device ptyr4
Suspending device ptyr3
Suspending device ptyr2
Suspending device ptyr1
Suspending device ptyr0
Suspending device ptyqf
Suspending device ptyqe
Suspending device ptyqd
Suspending device ptyqc
Suspending device ptyqb
Suspending device ptyqa
Suspending device ptyq9
Suspending device ptyq8
Suspending device ptyq7
Suspending device ptyq6
Suspending device ptyq5
Suspending device ptyq4
Suspending device ptyq3
Suspending device ptyq2
Suspending device ptyq1
Suspending device ptyq0
Suspending device ptypf
Suspending device ptype
Suspending device ptypd
Suspending device ptypc
Suspending device ptypb
Suspending device ptypa
Suspending device ptyp9
Suspending device ptyp8
Suspending device ptyp7
Suspending device ptyp6
Suspending device ptyp5
Suspending device ptyp4
Suspending device ptyp3
Suspending device ptyp2
Suspending device ptyp1
Suspending device ptyp0
Suspending device tty63
Suspending device tty62
Suspending device tty61
Suspending device tty60
Suspending device tty59
Suspending device tty58
Suspending device tty57
Suspending device tty56
Suspending device tty55
Suspending device tty54
Suspending device tty53
Suspending device tty52
Suspending device tty51
Suspending device tty50
Suspending device tty49
Suspending device tty48
Suspending device tty47
Suspending device tty46
Suspending device tty45
Suspending device tty44
Suspending device tty43
Suspending device tty42
Suspending device tty41
Suspending device tty40
Suspending device tty39
Suspending device tty38
Suspending device tty37
Suspending device tty36
Suspending device tty35
Suspending device tty34
Suspending device tty33
Suspending device tty32
Suspending device tty31
Suspending device tty30
Suspending device tty29
Suspending device tty28
Suspending device tty27
Suspending device tty26
Suspending device tty25
Suspending device tty24
Suspending device tty23
Suspending device tty22
Suspending device tty21
Suspending device tty20
Suspending device tty19
Suspending device tty18
Suspending device tty17
Suspending device tty16
Suspending device tty15
Suspending device tty14
Suspending device tty13
Suspending device tty12
Suspending device tty11
Suspending device tty10
Suspending device tty9
Suspending device tty8
Suspending device tty7
Suspending device tty6
Suspending device tty5
Suspending device tty4
Suspending device tty3
Suspending device tty2
Suspending device tty1
Suspending device vcsa
Suspending device vcs
Suspending device tty0
Suspending device ptmx
Suspending device console
Suspending device tty
Suspending device vtcon1
Suspending device fb0
Suspending device vesafb.0
Suspending device fbcon
Suspending device 0000:00:06.0:pcie03
Suspending device 0000:00:06.0:pcie01
Suspending device 0000:00:06.0:pcie00
Suspending device 0000:00:05.0:pcie03
Suspending device 0000:00:05.0:pcie01
Suspending device 0000:00:05.0:pcie00
Suspending device 0000:00:04.0:pcie03
Suspending device 0000:00:04.0:pcie01
Suspending device 0000:00:04.0:pcie00
Suspending device snapshot
Suspending device pcspkr
Suspending device mcelog
Suspending device lo
Suspending device kmsg
Suspending device urandom
Suspending device random
Suspending device full
Suspending device zero
Suspending device port
Suspending device null
Suspending device kmem
Suspending device mem
Suspending device 00:0c
ACPI handle has no context!
Suspending device 00:0b
Suspending device 00:0a
Suspending device 00:09
Suspending device 00:08
Suspending device 00:07
Suspending device 00:06
Suspending device 00:05
Suspending device 00:04
Suspending device 00:03
Suspending device 00:02
Suspending device 00:01
Suspending device 00:00
Suspending device pnp0
Suspending device 0000:02
Suspending device 0000:03
Suspending device 0000:02:04.3
ACPI handle has no context!
ACPI: PCI interrupt for device 0000:02:04.3 disabled
ACPI handle has no context!
Suspending device 0000:02:04.2
ACPI handle has no context!
ACPI: PCI interrupt for device 0000:02:04.2 disabled
ACPI handle has no context!
Suspending device 0000:02:04.1
ACPI handle has no context!
Suspending device 0000:02:04.0
Suspending device 0000:02:01.0
Suspending device 0000:30
Suspending device 0000:30:00.0
Suspending device 0000:20
Suspending device 0000:10
Suspending device 0000:01
Suspending device 0000:01:05.0
Suspending device 0000:00:18.3
Suspending device 0000:00:18.2
Suspending device 0000:00:18.1
Suspending device 0000:00:18.0
Suspending device 0000:00:14.4
Suspending device 0000:00:14.3
Suspending device 0000:00:14.2
ACPI: PCI interrupt for device 0000:00:14.2 disabled
Suspending device 0000:00:14.1
Suspending device 0000:00:14.0
Suspending device 0000:00:13.2
ACPI: PCI interrupt for device 0000:00:13.2 disabled
ehci_hcd 0000:00:13.2: --> PCI D3
Suspending device 0000:00:13.1
ACPI: PCI interrupt for device 0000:00:13.1 disabled
ohci_hcd 0000:00:13.1: --> PCI D0/legacy
Suspending device 0000:00:13.0
ACPI: PCI interrupt for device 0000:00:13.0 disabled
ohci_hcd 0000:00:13.0: --> PCI D0/legacy
Suspending device 0000:00:12.0
ACPI: PCI interrupt for device 0000:00:12.0 disabled
Suspending device 0000:00:06.0
Suspending device 0000:00:05.0
Suspending device 0000:00:04.0
Suspending device 0000:00:01.0
Suspending device 0000:00:00.0
Suspending device 0000:00
Suspending device pci0000:00
Suspending device LNXTHERM:03
Suspending device LNXTHERM:02
Suspending device LNXTHERM:01
Suspending device PNP0C0B:03
Suspending device PNP0C0B:02
ACPI: Transitioning device [C351] to D0
ACPI: Transitioning device [C351] to D0
Suspending device PNP0C0B:01
ACPI: Transitioning device [C350] to D0
ACPI: Transitioning device [C350] to D0
Suspending device PNP0C0B:00
ACPI: Transitioning device [C34F] to D0
ACPI: Transitioning device [C34F] to D0
Suspending device LNXPOWER:06
Suspending device LNXPOWER:05
Suspending device LNXPOWER:04
Suspending device LNXPOWER:03
Suspending device LNXTHERM:00
Suspending device PNP0C02:02
Suspending device PNP0C14:00
Suspending device PNP0C0D:00
Suspending device PNP0C0E:00
Suspending device ACPI0003:00
Suspending device PNP0C0A:01
Suspending device PNP0C0A:00
Suspending device HPQ0006:00
Suspending device PNP0C02:01
Suspending device device:49
Suspending device device:48
Suspending device device:47
Suspending device device:46
Suspending device device:45
Suspending device device:44
Suspending device device:43
Suspending device device:42
Suspending device device:41
Suspending device device:40
Suspending device device:3f
Suspending device device:3e
Suspending device device:3d
Suspending device device:3c
Suspending device device:3b
Suspending device device:3a
Suspending device device:39
Suspending device device:38
Suspending device device:37
Suspending device device:36
Suspending device device:35
Suspending device device:34
Suspending device device:33
Suspending device PNP0C0F:07
Suspending device PNP0C0F:06
Suspending device PNP0C0F:05
Suspending device PNP0C0F:04
Suspending device PNP0C0F:03
Suspending device PNP0C0F:02
Suspending device PNP0C0F:01
Suspending device PNP0C0F:00
Suspending device device:32
Suspending device device:31
Suspending device device:30
Suspending device device:2f
Suspending device device:2e
Suspending device device:2d
Suspending device device:2c
Suspending device device:2b
Suspending device device:2a
Suspending device device:29
Suspending device device:28
Suspending device device:27
Suspending device device:26
Suspending device device:25
Suspending device device:24
Suspending device device:23
Suspending device device:22
Suspending device device:21
Suspending device device:20
Suspending device device:1f
Suspending device device:1e
Suspending device device:1d
Suspending device device:1c
Suspending device device:1b
Suspending device device:1a
Suspending device device:19
Suspending device device:18
Suspending device device:17
Suspending device device:16
Suspending device device:15
Suspending device device:14
Suspending device device:13
Suspending device device:12
Suspending device device:11
Suspending device device:10
Suspending device PNP0C02:00
Suspending device PNP0000:00
Suspending device LNXPOWER:02
Suspending device SYN0118:00
Suspending device PNP0303:00
Suspending device PNP0B00:00
Suspending device PNP0800:00
Suspending device PNP0200:00
Suspending device PNP0100:00
Suspending device PNP0C04:00
Suspending device IFX0102:00
Suspending device LNXPOWER:01
Suspending device PNP0401:00
Suspending device PNP0A06:00
Suspending device PNP0C09:00
Suspending device device:0f
Suspending device device:0e
Suspending device LNXPOWER:00
Suspending device device:0d
Suspending device device:0c
Suspending device device:0b
Suspending device device:0a
Suspending device device:09
Suspending device device:08
Suspending device device:07
Suspending device device:06
Suspending device device:05
Suspending device device:04
Suspending device device:03
Suspending device device:02
Suspending device LNXVIDEO:00
Suspending device device:01
Suspending device PNP0A03:00
Suspending device PNP0C01:00
Suspending device device:00
Suspending device ACPI0007:01
Suspending device ACPI0007:00
Suspending device LNXPWRBN:00
Suspending device LNXSYSTM:00
Suspending device id
Suspending device vtcon0
Suspending device platform
Disabling non-boot CPUs ...
CPU0 attaching NULL sched-domain.
CPU1 attaching NULL sched-domain.
CPU 1 is now offline
SMP alternatives: switching to UP code
CPU0 attaching NULL sched-domain.
CPU1 is down
Extended CMOS year: 2000
swsusp: critical section:
swsusp: Need to copy 149622 pages
swsusp: Normal pages needed: 149622 + 1024 + 36, available pages: 341743
evxfevnt-0079 [00] enable : System is already in ACPI mode
Extended CMOS year: 2000
Enabling non-boot CPUs ...
CPU0 attaching NULL sched-domain.
SMP alternatives: switching to SMP code
Booting processor 1/2 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 3990.20 BogoMIPS (lpj=7980408)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping 02
Clockevents: could not switch to one-shot mode: lapic is not functional.
CPU0 attaching sched-domain:
Could not switch to high resolution mode on CPU 1
domain 0: span 00000000,00000000,00000000,00000003
groups: 00000000,00000000,00000000,00000001 00000000,00000000,00000000,00000002
CPU1 attaching sched-domain:
domain 0: span 00000000,00000000,00000000,00000003
groups: 00000000,00000000,00000000,00000002 00000000,00000000,00000000,00000001
CPU1 is up
ACPI: Transitioning device [C34F] to D3
ACPI: Transitioning device [C34F] to D3
ACPI: Transitioning device [C350] to D3
ACPI: Transitioning device [C350] to D3
PM: Writing back config space on device 0000:00:01.0 at offset 7 (was 2206161, writing 22206161)
PCI: Setting latency timer of device 0000:00:04.0 to 64
PCI: Setting latency timer of device 0000:00:05.0 to 64
PCI: Setting latency timer of device 0000:00:06.0 to 64
PM: Writing back config space on device 0000:00:12.0 at offset 1 (was 2b00003, writing 2b00007)
ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 16 (level, low) -> IRQ 16
ohci_hcd 0000:00:13.0: PCI legacy resume
ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 19
ohci_hcd 0000:00:13.1: PCI legacy resume
ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:13.2: PCI D0, from previous PCI D3
ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 19
PM: Writing back config space on device 0000:00:13.2 at offset 1 (was 2b00007, writing 2b00017)
ehci_hcd 0000:00:13.2: lost power, restarting
usb usb1: root hub lost power or was reset
ehci_hcd 0000:00:13.2: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
ehci_hcd 0000:00:13.2: MWI active
ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16
PM: Writing back config space on device 0000:00:14.2 at offset f (was 10a, writing a)
PM: Writing back config space on device 0000:00:14.2 at offset 1 (was 4100006, writing 4100002)
ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16
PM: Writing back config space on device 0000:00:14.4 at offset 6 (was 40030200, writing 40060200)
PM: Writing back config space on device 0000:30:00.0 at offset 1 (was 100007, writing 100003)
PM: Writing back config space on device 0000:02:04.0 at offset f (was 3c4010a, writing 5c0010a)
PM: Writing back config space on device 0000:02:04.0 at offset 3 (was 824010, writing 82a810)
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[d4011000-d40117ff] Max Packet=[2048] IR/IT contexts=[4/8]
ACPI: PCI Interrupt 0000:02:04.2[A] -> GSI 20 (level, low) -> IRQ 20
ACPI: PCI Interrupt 0000:02:04.3[A] -> GSI 20 (level, low) -> IRQ 20
sd 0:0:0:0: [sda] Starting disk
ata2: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: configured for UDMA/100
sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: selected mode 0x22
usb usb1: usb resume
ehci_hcd 0000:00:13.2: resume root hub after power loss
hub 1-0:1.0: trying to enable port power on non-switchable hub
usb usb2: usb resume
ohci_hcd 0000:00:13.0: BIOS/SMM active, control 008
ohci_hcd 0000:00:13.0: OHCI controller state
ohci_hcd 0000:00:13.0: OHCI 1.0, NO legacy support registers
ohci_hcd 0000:00:13.0: control 0x083 HCFS=operational CBSR=3
ohci_hcd 0000:00:13.0: cmdstatus 0x00000 SOC=0
ohci_hcd 0000:00:13.0: intrstatus 0x00000004 SF
ohci_hcd 0000:00:13.0: intrenable 0x8000005a MIE RHSC UE RD WDH
ohci_hcd 0000:00:13.0: hcca frame #0005
ohci_hcd 0000:00:13.0: roothub.a 02000204 POTPGT=2 NPS NDP=4(4)
ohci_hcd 0000:00:13.0: roothub.b 00000000 PPCM=0000 DR=0000
ohci_hcd 0000:00:13.0: roothub.status 00008000 DRWE
ohci_hcd 0000:00:13.0: roothub.portstatus [0] 0x00000100 PPS
ohci_hcd 0000:00:13.0: roothub.portstatus [1] 0x00010100 CSC PPS
ohci_hcd 0000:00:13.0: roothub.portstatus [2] 0x00000100 PPS
ohci_hcd 0000:00:13.0: roothub.portstatus [3] 0x00000100 PPS
ohci_hcd 0000:00:13.0: restart complete
usb usb2: root hub lost power or was reset
hub 2-0:1.0: trying to enable port power on non-switchable hub
hub 2-0:1.0: logical disconnect on port 2
usb usb3: usb resume
ohci_hcd 0000:00:13.1: BIOS/SMM active, control 008
ohci_hcd 0000:00:13.1: OHCI controller state
ohci_hcd 0000:00:13.1: OHCI 1.0, NO legacy support registers
ohci_hcd 0000:00:13.1: control 0x083 HCFS=operational CBSR=3
ohci_hcd 0000:00:13.1: cmdstatus 0x00000 SOC=0
ohci_hcd 0000:00:13.1: intrstatus 0x00000004 SF
ohci_hcd 0000:00:13.1: intrenable 0x8000005a MIE RHSC UE RD WDH
ohci_hcd 0000:00:13.1: hcca frame #0005
ohci_hcd 0000:00:13.1: roothub.a 02000204 POTPGT=2 NPS NDP=4(4)
ohci_hcd 0000:00:13.1: roothub.b 00000000 PPCM=0000 DR=0000
ohci_hcd 0000:00:13.1: roothub.status 00008000 DRWE
ohci_hcd 0000:00:13.1: roothub.portstatus [0] 0x00010100 CSC PPS
ohci_hcd 0000:00:13.1: roothub.portstatus [1] 0x00000100 PPS
ohci_hcd 0000:00:13.1: roothub.portstatus [2] 0x00010100 CSC PPS
ohci_hcd 0000:00:13.1: roothub.portstatus [3] 0x00000100 PPS
ohci_hcd 0000:00:13.1: restart complete
usb usb3: root hub lost power or was reset
hub 3-0:1.0: trying to enable port power on non-switchable hub
hub 3-0:1.0: logical disconnect on port 1
hub 3-0:1.0: logical disconnect on port 3
Restarting tasks ... <7>hub 1-0:1.0: state 7 ports 8 chg 0000 evt 004c
ehci_hcd 0000:00:13.2: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT
hub 1-0:1.0: port 2, status 0501, change 0001, 480 Mb/s
done.
swsusp: Basic memory bitmaps freed
hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:13.2: port 2 full speed --> companion
ehci_hcd 0000:00:13.2: GetStatus port 2 status 003801 POWER OWNER sig=j CONNECT
hub 1-0:1.0: port 2 not reset yet, waiting 50ms
ehci_hcd 0000:00:13.2: GetStatus port 2 status 003002 POWER OWNER sig=se0 CSC
ehci_hcd 0000:00:13.2: GetStatus port 3 status 001803 POWER sig=j CSC CONNECT
hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s
hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:13.2: port 3 full speed --> companion
ehci_hcd 0000:00:13.2: GetStatus port 3 status 003801 POWER OWNER sig=j CONNECT
hub 1-0:1.0: port 3 not reset yet, waiting 50ms
ehci_hcd 0000:00:13.2: GetStatus port 3 status 003002 POWER OWNER sig=se0 CSC
ehci_hcd 0000:00:13.2: GetStatus port 6 status 001403 POWER sig=k CSC CONNECT
hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:13.2: port 6 low speed --> companion
ehci_hcd 0000:00:13.2: GetStatus port 6 status 003002 POWER OWNER sig=se0 CSC
hub 2-0:1.0: state 7 ports 4 chg 0004 evt 0004
ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [1] = 0x00010101 CSC PPS CCS
hub 2-0:1.0: port 2, status 0101, change 0001, 12 Mb/s
usb 2-2: USB disconnect, address 3
usb 2-2: unregistering device
usb 2-2: usb_disable_device nuking all URBs
usb 2-2: unregistering interface 2-2:1.0
usb 2-2:1.0: uevent
usb 2-2:1.0: uevent
usb 2-2: unregistering interface 2-2:1.1
usb 2-2:1.1: uevent
usb 2-2:1.1: uevent
usb 2-2: unregistering interface 2-2:1.2
usb 2-2:1.2: uevent
usb 2-2:1.2: uevent
usb 2-2: unregistering interface 2-2:1.3
usb 2-2:1.3: uevent
usb 2-2:1.3: uevent
usb 2-2: uevent
hub 2-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101
ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS
usb 2-2: new full speed USB device using ohci_hcd and address 4
ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS
usb 2-2: skipped 1 descriptor after interface
usb 2-2: default language 0x0409
usb 2-2: uevent
usb 2-2: usb_probe_device
usb 2-2: configuration #1 chosen from 1 choice
usb 2-2: adding 2-2:1.0 (config #1, interface 0)
usb 2-2:1.0: uevent
usb 2-2:1.0: uevent
hci_usb 2-2:1.0: usb_probe_interface
hci_usb 2-2:1.0: usb_probe_interface - got id
usb 2-2: adding 2-2:1.1 (config #1, interface 1)
usb 2-2:1.1: uevent
usb 2-2:1.1: uevent
usb 2-2: adding 2-2:1.2 (config #1, interface 2)
usb 2-2:1.2: uevent
usb 2-2:1.2: uevent
hci_usb 2-2:1.2: usb_probe_interface
hci_usb 2-2:1.2: usb_probe_interface - got id
usb 2-2: adding 2-2:1.3 (config #1, interface 3)
usb 2-2:1.3: uevent
usb 2-2:1.3: uevent
hci_usb 2-2:1.3: usb_probe_interface
hci_usb 2-2:1.3: usb_probe_interface - got id
/home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file '004'
usb 2-2: new device found, idVendor=03f0, idProduct=171d
usb 2-2: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-2: Product: HP Integrated Module
usb 2-2: Manufacturer: Broadcom Corp
hub 3-0:1.0: state 7 ports 4 chg 000a evt 000a
ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [0] = 0x00010101 CSC PPS CCS
hub 3-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
usb 3-1: USB disconnect, address 4
usb 3-1: unregistering device
usb 3-1: usb_disable_device nuking all URBs
usb 3-1: unregistering interface 3-1:1.0
usb 3-1:1.0: uevent
usb 3-1:1.0: uevent
usb 3-1: uevent
hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
usb 3-1: new full speed USB device using ohci_hcd and address 6
ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
usb 3-1: ep0 maxpacket = 8
usb 3-1: default language 0x0409
usb 3-1: uevent
usb 3-1: usb_probe_device
usb 3-1: configuration #1 chosen from 1 choice
usb 3-1: adding 3-1:1.0 (config #1, interface 0)
usb 3-1:1.0: uevent
usb 3-1:1.0: uevent
/home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file '006'
usb 3-1: new device found, idVendor=08ff, idProduct=2580
usb 3-1: new device strings: Mfr=0, Product=1, SerialNumber=0
usb 3-1: Product: Fingerprint Sensor
ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [2] = 0x00010301 CSC LSDA PPS CCS
hub 3-0:1.0: port 3, status 0301, change 0001, 1.5 Mb/s
usb 3-3: USB disconnect, address 5
usb 3-3: unregistering device
usb 3-3: usb_disable_device nuking all URBs
usb 3-3: unregistering interface 3-3:1.0
usb 3-3:1.0: uevent
usb 3-3:1.0: uevent
usb 3-3: unregistering interface 3-3:1.1
/home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/file.c: removing 96 minor
usb 3-3:1.1: uevent
usb 3-3:1.1: uevent
usb 3-3: uevent
hub 3-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x301
ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [2] = 0x00100303 PRSC LSDA PPS PES CCS
usb 3-3: new low speed USB device using ohci_hcd and address 7
ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [2] = 0x00100303 PRSC LSDA PPS PES CCS
usb 3-3: skipped 1 descriptor after interface
usb 3-3: skipped 1 descriptor after interface
usb 3-3: default language 0x0409
usb 3-3: uevent
usb 3-3: usb_probe_device
usb 3-3: configuration #1 chosen from 1 choice
usb 3-3: adding 3-3:1.0 (config #1, interface 0)
usb 3-3:1.0: uevent
usb 3-3:1.0: uevent
usbhid 3-3:1.0: usb_probe_interface
usbhid 3-3:1.0: usb_probe_interface - got id
input: Logitech USB Receiver as /class/input/input10
input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:13.1-3
usb 3-3: adding 3-3:1.1 (config #1, interface 1)
usb 3-3:1.1: uevent
usb 3-3:1.1: uevent
usbhid 3-3:1.1: usb_probe_interface
usbhid 3-3:1.1: usb_probe_interface - got id
input: Logitech USB Receiver as /class/input/input11
/home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/file.c: looking for a minor, starting at 96
input,hiddev96: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:13.1-3
/home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file '007'
usb 3-3: new device found, idVendor=046d, idProduct=c521
usb 3-3: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-3: Product: USB Receiver
usb 3-3: Manufacturer: Logitech
hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0040
hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0004
hub 3-0:1.0: state 7 ports 4 chg 0000 evt 0008
hub 1-0:1.0: hub_suspend
usb usb1: bus auto-suspend
ehci_hcd 0000:00:13.2: suspend root hub
bcm43xx driver
ACPI: PCI Interrupt 0000:30:00.0[A] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:30:00.0 to 64
bcm43xx: Chip ID 0x4311, rev 0x1
bcm43xx: Number of cores: 4
bcm43xx: Core 0: ID 0x800, rev 0x11, vendor 0x4243
bcm43xx: Core 1: ID 0x812, rev 0xa, vendor 0x4243
bcm43xx: Core 2: ID 0x817, rev 0x3, vendor 0x4243
bcm43xx: Core 3: ID 0x820, rev 0x1, vendor 0x4243
bcm43xx: PHY connected
bcm43xx: Detected PHY: Analog: 4, Type 2, Revision 8
bcm43xx: Detected Radio: ID: 2205017f (Manuf: 17f Ver: 2050 Rev: 2)
bcm43xx: Radio initialized
bcm43xx: Radio initialized
bcm43xx: PHY connected
bcm43xx: Microcode rev 0x127, pl 0xe (2005-04-18 02:36:27)
bcm43xx: Radio turned on
bcm43xx: Radio enabled by hardware
bcm43xx: Chip initialized
bcm43xx: 32-bit DMA initialized
bcm43xx: Keys cleared
bcm43xx: Selected 802.11 core (phytype 2)
ADDRCONF(NETDEV_UP): eth1: link is not ready
SoftMAC: Scanning finished: scanned 13 channels starting with channel 1
SoftMAC: Associate: Scanning for networks first.
SoftMAC: Scanning finished: scanned 13 channels starting with channel 1
SoftMAC: Queueing Authentication Request to 00:17:9a:f3:b5:75
SoftMAC: Cannot associate without being authenticated, requested authentication
SoftMAC: Sent Authentication Request to 00:17:9a:f3:b5:75.
SoftMAC: Open Authentication completed with 00:17:9a:f3:b5:75
SoftMAC: sent association request!
SoftMAC: associated!
ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
SFW2-OUT-ERROR IN= OUT=eth1 SRC=0000:0000:0000:0000:0000:0000:0000:0000 DST=ff02:0000:0000:0000:0000:0000:0000:0016 LEN=76 TC=0 HOPLIMIT=1 FLOWLBL=0 OPT ( ) PROTO=ICMPv6 TYPE=143 CODE=0
SoftMAC: Getting essid from req_essid
SFW2-OUT-ERROR IN= OUT=eth1 SRC=0000:0000:0000:0000:0000:0000:0000:0000 DST=ff02:0000:0000:0000:0000:0001:ffbe:9531 LEN=64 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=ICMPv6 TYPE=135 CODE=0
SoftMAC: Getting essid from req_essid
SFW2-OUT-ERROR IN= OUT=eth1 SRC=fe80:0000:0000:0000:0214:a5ff:febe:9531 DST=ff02:0000:0000:0000:0000:0000:0000:0002 LEN=56 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=ICMPv6 TYPE=133 CODE=0
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SFW2-OUT-ERROR IN= OUT=eth1 SRC=fe80:0000:0000:0000:0214:a5ff:febe:9531 DST=ff02:0000:0000:0000:0000:0000:0000:0016 LEN=76 TC=0 HOPLIMIT=1 FLOWLBL=0 OPT ( ) PROTO=ICMPv6 TYPE=143 CODE=0
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SFW2-OUT-ERROR IN= OUT=eth1 SRC=fe80:0000:0000:0000:0214:a5ff:febe:9531 DST=ff02:0000:0000:0000:0000:0000:0000:0002 LEN=56 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=ICMPv6 TYPE=133 CODE=0
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:17:9a:f3:b5:75:08:00 SRC=62.121.83.254 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=19492 PROTO=2
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SFW2-OUT-ERROR IN= OUT=eth1 SRC=fe80:0000:0000:0000:0214:a5ff:febe:9531 DST=ff02:0000:0000:0000:0000:0000:0000:0002 LEN=56 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=ICMPv6 TYPE=133 CODE=0
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
eth1: no IPv6 routers present
WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()

Call Trace:
 [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9
 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
 [<ffffffff8024ee6d>] update_target+0x71/0x76
 [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0
 [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382
 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
 [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
 [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
 [<ffffffff8022f18e>] default_wake_function+0x0/0xf
 [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
 [<ffffffff80282e91>] vma_link+0xdd/0x10b
 [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
 [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
 [<ffffffff802a0896>] do_ioctl+0x2a/0x77
 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
 [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
 [<ffffffff8020bfde>] system_call+0x7e/0x83

WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()

Call Trace:
 [<ffffffff8021b2b2>] smp_call_function_mask+0x6d/0x82
 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
 [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2
 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
 [<ffffffff8024ee6d>] update_target+0x71/0x76
 [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2
 [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382
 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
 [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
 [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
 [<ffffffff8022f18e>] default_wake_function+0x0/0xf
 [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
 [<ffffffff80282e91>] vma_link+0xdd/0x10b
 [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
 [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
 [<ffffffff802a0896>] do_ioctl+0x2a/0x77
 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
 [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
 [<ffffffff8020bfde>] system_call+0x7e/0x83
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()

Call Trace:
 [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9
 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
 [<ffffffff8024ee6d>] update_target+0x71/0x76
 [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0
 [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382
 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
 [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
 [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
 [<ffffffff8022f18e>] default_wake_function+0x0/0xf
 [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
 [<ffffffff80282e91>] vma_link+0xdd/0x10b
 [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
 [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
 [<ffffffff802a0896>] do_ioctl+0x2a/0x77
 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
 [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
 [<ffffffff8020bfde>] system_call+0x7e/0x83

WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()

Call Trace:
 [<ffffffff8021b2b2>] smp_call_function_mask+0x6d/0x82
 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
 [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2
 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
 [<ffffffff8024ee6d>] update_target+0x71/0x76
 [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2
 [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382
 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
 [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
 [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
 [<ffffffff8022f18e>] default_wake_function+0x0/0xf
 [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
 [<ffffffff80282e91>] vma_link+0xdd/0x10b
 [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
 [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
 [<ffffffff802a0896>] do_ioctl+0x2a/0x77
 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
 [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
 [<ffffffff8020bfde>] system_call+0x7e/0x83
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:17:9a:f3:b5:75:08:00 SRC=62.121.83.254 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=21260 PROTO=2
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:17:9a:f3:b5:75:08:00 SRC=62.121.83.254 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=23324 PROTO=2
SoftMAC: Getting essid from req_essid
WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()

Call Trace:
 [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9
 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
 [<ffffffff8024ee6d>] update_target+0x71/0x76
 [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0
 [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382
 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
 [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
 [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
 [<ffffffff8022f18e>] default_wake_function+0x0/0xf
 [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
 [<ffffffff80282e91>] vma_link+0xdd/0x10b
 [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
 [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
 [<ffffffff802a0896>] do_ioctl+0x2a/0x77
 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
 [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
 [<ffffffff8020bfde>] system_call+0x7e/0x83

WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()

Call Trace:
 [<ffffffff8021b2b2>] smp_call_function_mask+0x6d/0x82
 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
 [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2
 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
 [<ffffffff8024ee6d>] update_target+0x71/0x76
 [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2
 [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382
 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
 [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
 [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
 [<ffffffff8022f18e>] default_wake_function+0x0/0xf
 [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
 [<ffffffff80282e91>] vma_link+0xdd/0x10b
 [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
 [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
 [<ffffffff802a0896>] do_ioctl+0x2a/0x77
 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
 [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
 [<ffffffff8020bfde>] system_call+0x7e/0x83
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()

Call Trace:
 [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9
 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
 [<ffffffff8024ee6d>] update_target+0x71/0x76
 [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0
 [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382
 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
 [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
 [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
 [<ffffffff8022f18e>] default_wake_function+0x0/0xf
 [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
 [<ffffffff80282e91>] vma_link+0xdd/0x10b
 [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
 [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
 [<ffffffff802a0896>] do_ioctl+0x2a/0x77
 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
 [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
 [<ffffffff8020bfde>] system_call+0x7e/0x83

WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()

Call Trace:
 [<ffffffff8021b2b2>] smp_call_function_mask+0x6d/0x82
 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
 [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2
 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
 [<ffffffff8024ee6d>] update_target+0x71/0x76
 [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2
 [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382
 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
 [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
 [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
 [<ffffffff8022f18e>] default_wake_function+0x0/0xf
 [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
 [<ffffffff80282e91>] vma_link+0xdd/0x10b
 [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
 [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
 [<ffffffff802a0896>] do_ioctl+0x2a/0x77
 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
 [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
 [<ffffffff8020bfde>] system_call+0x7e/0x83
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()

Call Trace:
 [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9
 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
 [<ffffffff8024ee6d>] update_target+0x71/0x76
 [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0
 [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382
 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
 [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
 [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
 [<ffffffff8022f18e>] default_wake_function+0x0/0xf
 [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
 [<ffffffff80282e91>] vma_link+0xdd/0x10b
 [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
 [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
 [<ffffffff802a0896>] do_ioctl+0x2a/0x77
 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
 [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
 [<ffffffff8020bfde>] system_call+0x7e/0x83

WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()

Call Trace:
 [<ffffffff8021b2b2>] smp_call_function_mask+0x6d/0x82
 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
 [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2
 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
 [<ffffffff8024ee6d>] update_target+0x71/0x76
 [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2
 [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382
 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
 [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
 [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
 [<ffffffff8022f18e>] default_wake_function+0x0/0xf
 [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
 [<ffffffff80282e91>] vma_link+0xdd/0x10b
 [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
 [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
 [<ffffffff802a0896>] do_ioctl+0x2a/0x77
 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
 [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
 [<ffffffff8020bfde>] system_call+0x7e/0x83
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()

Call Trace:
 [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9
 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
 [<ffffffff8024ee6d>] update_target+0x71/0x76
 [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0
 [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382
 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
 [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
 [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
 [<ffffffff8022f18e>] default_wake_function+0x0/0xf
 [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
 [<ffffffff80282e91>] vma_link+0xdd/0x10b
 [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
 [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
 [<ffffffff802a0896>] do_ioctl+0x2a/0x77
 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
 [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
 [<ffffffff8020bfde>] system_call+0x7e/0x83

WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()

Call Trace:
 [<ffffffff8021b2b2>] smp_call_function_mask+0x6d/0x82
 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
 [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2
 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
 [<ffffffff8024ee6d>] update_target+0x71/0x76
 [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2
 [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382
 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
 [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
 [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
 [<ffffffff8022f18e>] default_wake_function+0x0/0xf
 [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
 [<ffffffff80282e91>] vma_link+0xdd/0x10b
 [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
 [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
 [<ffffffff802a0896>] do_ioctl+0x2a/0x77
 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
 [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
 [<ffffffff8020bfde>] system_call+0x7e/0x83
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()

Call Trace:
 [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9
 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
 [<ffffffff8024ee6d>] update_target+0x71/0x76
 [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0
 [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382
 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
 [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
 [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
 [<ffffffff8022f18e>] default_wake_function+0x0/0xf
 [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
 [<ffffffff80282e91>] vma_link+0xdd/0x10b
 [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
 [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
 [<ffffffff802a0896>] do_ioctl+0x2a/0x77
 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
 [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
 [<ffffffff8020bfde>] system_call+0x7e/0x83

WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()

Call Trace:
 [<ffffffff8021b2b2>] smp_call_function_mask+0x6d/0x82
 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
 [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2
 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
 [<ffffffff8024ee6d>] update_target+0x71/0x76
 [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2
 [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382
 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
 [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
 [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
 [<ffffffff8022f18e>] default_wake_function+0x0/0xf
 [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
 [<ffffffff80282e91>] vma_link+0xdd/0x10b
 [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
 [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
 [<ffffffff802a0896>] do_ioctl+0x2a/0x77
 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
 [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
 [<ffffffff8020bfde>] system_call+0x7e/0x83
SoftMAC: Getting essid from req_essid
SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:17:9a:f3:b5:75:08:00 SRC=62.121.83.254 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=25180 PROTO=2
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()

Call Trace:
 [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9
 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
 [<ffffffff8024ee6d>] update_target+0x71/0x76
 [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0
 [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382
 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
 [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
 [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
 [<ffffffff8022f18e>] default_wake_function+0x0/0xf
 [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
 [<ffffffff80282e91>] vma_link+0xdd/0x10b
 [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
 [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
 [<ffffffff802a0896>] do_ioctl+0x2a/0x77
 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
 [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
 [<ffffffff8020bfde>] system_call+0x7e/0x83

WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()

Call Trace:
 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
 [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2
 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
 [<ffffffff8024ee6d>] update_target+0x71/0x76
 [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2
 [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382
 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
 [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
 [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
 [<ffffffff8022f18e>] default_wake_function+0x0/0xf
 [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
 [<ffffffff80282e91>] vma_link+0xdd/0x10b
 [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
 [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
 [<ffffffff802a0896>] do_ioctl+0x2a/0x77
 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
 [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
 [<ffffffff8020bfde>] system_call+0x7e/0x83
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()

Call Trace:
 [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9
 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
 [<ffffffff8024ee6d>] update_target+0x71/0x76
 [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0
 [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382
 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
 [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
 [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
 [<ffffffff8022f18e>] default_wake_function+0x0/0xf
 [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
 [<ffffffff80282e91>] vma_link+0xdd/0x10b
 [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
 [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
 [<ffffffff802a0896>] do_ioctl+0x2a/0x77
 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
 [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
 [<ffffffff8020bfde>] system_call+0x7e/0x83

WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()

Call Trace:
 [<ffffffff8021b2b2>] smp_call_function_mask+0x6d/0x82
 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
 [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2
 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
 [<ffffffff8024ee6d>] update_target+0x71/0x76
 [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2
 [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382
 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
 [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
 [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
 [<ffffffff8022f18e>] default_wake_function+0x0/0xf
 [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
 [<ffffffff80282e91>] vma_link+0xdd/0x10b
 [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
 [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
 [<ffffffff802a0896>] do_ioctl+0x2a/0x77
 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
 [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
 [<ffffffff8020bfde>] system_call+0x7e/0x83
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()

Call Trace:
 [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9
 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
 [<ffffffff8024ee6d>] update_target+0x71/0x76
 [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0
 [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382
 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
 [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
 [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
 [<ffffffff8022f18e>] default_wake_function+0x0/0xf
 [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
 [<ffffffff80282e91>] vma_link+0xdd/0x10b
 [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
 [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
 [<ffffffff802a0896>] do_ioctl+0x2a/0x77
 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
 [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
 [<ffffffff8020bfde>] system_call+0x7e/0x83

WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()

Call Trace:
 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
 [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2
 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
 [<ffffffff8024ee6d>] update_target+0x71/0x76
 [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2
 [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382
 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
 [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
 [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
 [<ffffffff8022f18e>] default_wake_function+0x0/0xf
 [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
 [<ffffffff80282e91>] vma_link+0xdd/0x10b
 [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
 [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
 [<ffffffff802a0896>] do_ioctl+0x2a/0x77
 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
 [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
 [<ffffffff8020bfde>] system_call+0x7e/0x83
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:17:9a:f3:b5:75:08:00 SRC=62.121.83.254 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=26892 PROTO=2
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()

Call Trace:
 [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9
 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
 [<ffffffff8024ee6d>] update_target+0x71/0x76
 [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0
 [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382
 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
 [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
 [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
 [<ffffffff8022f18e>] default_wake_function+0x0/0xf
 [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
 [<ffffffff80282e91>] vma_link+0xdd/0x10b
 [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
 [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
 [<ffffffff802a0896>] do_ioctl+0x2a/0x77
 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
 [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
 [<ffffffff8020bfde>] system_call+0x7e/0x83

WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()

Call Trace:
 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
 [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2
 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
 [<ffffffff8024ee6d>] update_target+0x71/0x76
 [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2
 [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382
 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
 [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
 [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
 [<ffffffff8022f18e>] default_wake_function+0x0/0xf
 [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
 [<ffffffff80282e91>] vma_link+0xdd/0x10b
 [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
 [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
 [<ffffffff802a0896>] do_ioctl+0x2a/0x77
 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
 [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
 [<ffffffff8020bfde>] system_call+0x7e/0x83
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()

Call Trace:
 [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9
 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
 [<ffffffff8024ee6d>] update_target+0x71/0x76
 [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0
 [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382
 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
 [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
 [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
 [<ffffffff8022f18e>] default_wake_function+0x0/0xf
 [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
 [<ffffffff80282e91>] vma_link+0xdd/0x10b
 [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
 [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
 [<ffffffff802a0896>] do_ioctl+0x2a/0x77
 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
 [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
 [<ffffffff8020bfde>] system_call+0x7e/0x83

WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()

Call Trace:
 [<ffffffff8021b2b2>] smp_call_function_mask+0x6d/0x82
 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
 [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2
 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
 [<ffffffff8024ee6d>] update_target+0x71/0x76
 [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2
 [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382
 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
 [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
 [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
 [<ffffffff8022f18e>] default_wake_function+0x0/0xf
 [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
 [<ffffffff80282e91>] vma_link+0xdd/0x10b
 [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
 [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
 [<ffffffff802a0896>] do_ioctl+0x2a/0x77
 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
 [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
 [<ffffffff8020bfde>] system_call+0x7e/0x83
SoftMAC: Getting essid from req_essid
WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()

Call Trace:
 [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9
 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
 [<ffffffff8024ee6d>] update_target+0x71/0x76
 [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0
 [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382
 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
 [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
 [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
 [<ffffffff8022f18e>] default_wake_function+0x0/0xf
 [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
 [<ffffffff80282e91>] vma_link+0xdd/0x10b
 [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
 [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
 [<ffffffff802a0896>] do_ioctl+0x2a/0x77
 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
 [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
 [<ffffffff8020bfde>] system_call+0x7e/0x83

WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()

Call Trace:
 [<ffffffff8021b2b2>] smp_call_function_mask+0x6d/0x82
 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
 [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2
 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
 [<ffffffff8024ee6d>] update_target+0x71/0x76
 [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2
 [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382
 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
 [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
 [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
 [<ffffffff8022f18e>] default_wake_function+0x0/0xf
 [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
 [<ffffffff80282e91>] vma_link+0xdd/0x10b
 [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
 [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
 [<ffffffff802a0896>] do_ioctl+0x2a/0x77
 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
 [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
 [<ffffffff8020bfde>] system_call+0x7e/0x83
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid
SoftMAC: Getting essid from req_essid

Rafael J. Wysocki

2007-10-15 20:24 UTC #52 lore raw

Quoted 24 lines · Mark Gross

Quoted 7 lines · Rafael J. Wysocki
Quoted 6 lines · Andrew Morton
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.23/2.6.23-mm1/
- I've been largely avoiding applying anything since rc8-mm2 in an attempt to stabilise things for the 2.6.23 merge.
Quoted 7 lines
Quoted 3 lines
But that didn't stop all the subsystem maintainers from going nuts, with the usual accuracy. We're up to a 37MB diff now, but it seems to be working a bit better.
I get many traces similar to the one below from it (w/ hotfixes):
WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()
This is from : WARN_ON(irqs_disabled()) in the cmp_call_function_mask processor_idle.c is registering a acpi_processor_latency_notify
my code changed the notifier call from blocking_notifier_call_chain to srcu_notifier_call_chain, because dynamic creation of notifier chains at runtime where easier with the srcu_notifier_call_chain than the blocking_notifier_call_chain.

Quoted 7 lines

As dynamic creation of PM_QOS parameters are no longer needed I can change the notifiers back to match what was in lanency.c
However; looking at the call tree differences between blockin_notifier_call_chain and srcu_notifier_call_chain I cannot see a difference in irq enabling / disabling. I'm not confident this will address this yet.

Well, you can send me a patch to check. :-)

Quoted 3 lines

I'll change the PM_QOS params patch to use blocking notifiers and test on a 64bit boot and see what happens. I've been needing to setup my x86_64 dev box for a while now anyway.

OK, thanks.

Greetings,
Rafael

Mark Gross

2007-10-16 19:59 UTC #53 lore raw

Quoted 28 lines · Rafael J. Wysocki

Quoted 27 lines · Mark Gross
Quoted 7 lines · Rafael J. Wysocki
Quoted 6 lines · Andrew Morton
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.23/2.6.23-mm1/
- I've been largely avoiding applying anything since rc8-mm2 in an attempt to stabilise things for the 2.6.23 merge.
Quoted 7 lines
Quoted 3 lines
But that didn't stop all the subsystem maintainers from going nuts, with the usual accuracy. We're up to a 37MB diff now, but it seems to be working a bit better.
I get many traces similar to the one below from it (w/ hotfixes):
WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()
This is from : WARN_ON(irqs_disabled()) in the cmp_call_function_mask processor_idle.c is registering a acpi_processor_latency_notify
my code changed the notifier call from blocking_notifier_call_chain to srcu_notifier_call_chain, because dynamic creation of notifier chains at runtime where easier with the srcu_notifier_call_chain than the blocking_notifier_call_chain.
As dynamic creation of PM_QOS parameters are no longer needed I can change the notifiers back to match what was in lanency.c

Quoted 6 lines

Quoted 4 lines
However; looking at the call tree differences between blockin_notifier_call_chain and srcu_notifier_call_chain I cannot see a difference in irq enabling / disabling. I'm not confident this will address this yet.
Well, you can send me a patch to check. :-)

I think I'll have to send you a patch that changes the notifiers but I doubt it will fix it.

After a bit of messing around I have the 2.6.23-mm1 running on my core-2 box note: Ubuntu's make-kpkg on the mm1 tree resulted in a system that wouldn't boot past the intrd. Looks like the pivot root failed or something.

Anyway, I'm not reproducing your experience, snd_pcm is loaded. I don't know none of the WARN's are not hitting on my box.

do you have some configuration information that could help me reproduce the issue?

Quoted 6 lines

Quoted 4 lines
I'll change the PM_QOS params patch to use blocking notifiers and test on a 64bit boot and see what happens. I've been needing to setup my x86_64 dev box for a while now anyway.
OK, thanks.

well its booting but I'm not reproducing the trace messages.

I'll do the patch for you to test.

--mgross

Rafael J. Wysocki

2007-10-16 20:12 UTC #54 lore raw

Quoted 44 lines · Mark Gross

Quoted 28 lines · Rafael J. Wysocki
Quoted 27 lines · Mark Gross
Quoted 7 lines · Rafael J. Wysocki
Quoted 6 lines · Andrew Morton
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.23/2.6.23-mm1/
- I've been largely avoiding applying anything since rc8-mm2 in an attempt to stabilise things for the 2.6.23 merge.
Quoted 7 lines
Quoted 3 lines
But that didn't stop all the subsystem maintainers from going nuts, with the usual accuracy. We're up to a 37MB diff now, but it seems to be working a bit better.
I get many traces similar to the one below from it (w/ hotfixes):
WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()
This is from : WARN_ON(irqs_disabled()) in the cmp_call_function_mask processor_idle.c is registering a acpi_processor_latency_notify
my code changed the notifier call from blocking_notifier_call_chain to srcu_notifier_call_chain, because dynamic creation of notifier chains at runtime where easier with the srcu_notifier_call_chain than the blocking_notifier_call_chain.
As dynamic creation of PM_QOS parameters are no longer needed I can change the notifiers back to match what was in lanency.c
Quoted 6 lines
Quoted 4 lines
However; looking at the call tree differences between blockin_notifier_call_chain and srcu_notifier_call_chain I cannot see a difference in irq enabling / disabling. I'm not confident this will address this yet.
Well, you can send me a patch to check. :-)
I think I'll have to send you a patch that changes the notifiers but I doubt it will fix it.
After a bit of messing around I have the 2.6.23-mm1 running on my core-2 box note: Ubuntu's make-kpkg on the mm1 tree resulted in a system that wouldn't boot past the intrd. Looks like the pivot root failed or something.

Quoted 5 lines

Anyway, I'm not reproducing your experience, snd_pcm is loaded. I don't know none of the WARN's are not hitting on my box.
do you have some configuration information that could help me reproduce the issue?

Well, I can send you the .config, but the box is AMD-based (Turion 64 X2), with an ATI chipset and an HP BIOS, so it seems to be much different from yours.

Greetings,
Rafael

Mark Gross

2007-10-16 23:33 UTC #55 lore raw

Quoted 48 lines · Rafael J. Wysocki

Quoted 47 lines · Mark Gross
Quoted 28 lines · Rafael J. Wysocki
Quoted 27 lines · Mark Gross
Quoted 7 lines · Rafael J. Wysocki
Quoted 6 lines · Andrew Morton
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.23/2.6.23-mm1/
- I've been largely avoiding applying anything since rc8-mm2 in an attempt to stabilise things for the 2.6.23 merge.
Quoted 7 lines
Quoted 3 lines
But that didn't stop all the subsystem maintainers from going nuts, with the usual accuracy. We're up to a 37MB diff now, but it seems to be working a bit better.
I get many traces similar to the one below from it (w/ hotfixes):
WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()
This is from : WARN_ON(irqs_disabled()) in the cmp_call_function_mask processor_idle.c is registering a acpi_processor_latency_notify
my code changed the notifier call from blocking_notifier_call_chain to srcu_notifier_call_chain, because dynamic creation of notifier chains at runtime where easier with the srcu_notifier_call_chain than the blocking_notifier_call_chain.
As dynamic creation of PM_QOS parameters are no longer needed I can change the notifiers back to match what was in lanency.c
Quoted 6 lines
Quoted 4 lines
However; looking at the call tree differences between blockin_notifier_call_chain and srcu_notifier_call_chain I cannot see a difference in irq enabling / disabling. I'm not confident this will address this yet.
Well, you can send me a patch to check. :-)
I think I'll have to send you a patch that changes the notifiers but I doubt it will fix it.
After a bit of messing around I have the 2.6.23-mm1 running on my core-2 box note: Ubuntu's make-kpkg on the mm1 tree resulted in a system that wouldn't boot past the intrd. Looks like the pivot root failed or something.
Anyway, I'm not reproducing your experience, snd_pcm is loaded. I don't know none of the WARN's are not hitting on my box.

Quoted 6 lines

Quoted 2 lines
do you have some configuration information that could help me reproduce the issue?
Well, I can send you the .config, but the box is AMD-based (Turion 64 X2), with an ATI chipset and an HP BIOS, so it seems to be much different from yours.

it may be worth a shot anyway.

BTW while changing my code to use the blocking notifiers I found that there is a initialization race between cpu-idle and pm_qos I have to fix.

I need to re factor my start up code to handle cpuidle registering itself in as a notifier at core_initcall time.

I'll have a patch ready tomorrow.

thanks,

--mgross

Mark Gross

2007-10-17 21:22 UTC #56 lore raw

PATCH 1/1 static initialization with blocking notifiers. was :wqRe: 2.6.23-mm1

In reply to Rafael J. Wysocki

I didn't see my patch show up on the list so I'm resending it.

Quoted 32 lines · Rafael J. Wysocki

Quoted 31 lines · Mark Gross
Quoted 30 lines · Rafael J. Wysocki
Quoted 29 lines · Mark Gross
Quoted 28 lines · Rafael J. Wysocki
Quoted 27 lines · Mark Gross
Quoted 7 lines · Rafael J. Wysocki
Quoted 6 lines · Andrew Morton
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.23/2.6.23-mm1/
- I've been largely avoiding applying anything since rc8-mm2 in an attempt to stabilise things for the 2.6.23 merge.
Quoted 7 lines
Quoted 3 lines
But that didn't stop all the subsystem maintainers from going nuts, with the usual accuracy. We're up to a 37MB diff now, but it seems to be working a bit better.
I get many traces similar to the one below from it (w/ hotfixes):
WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()
This is from : WARN_ON(irqs_disabled()) in the cmp_call_function_mask processor_idle.c is registering a acpi_processor_latency_notify
my code changed the notifier call from blocking_notifier_call_chain to srcu_notifier_call_chain, because dynamic creation of notifier chains at runtime where easier with the srcu_notifier_call_chain than the blocking_notifier_call_chain.
As dynamic creation of PM_QOS parameters are no longer needed I can change the notifiers back to match what was in lanency.c

Quoted 6 lines

Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Quoted 4 lines
However; looking at the call tree differences between blockin_notifier_call_chain and srcu_notifier_call_chain I cannot see a difference in irq enabling / disabling. I'm not confident this will address this yet.
Well, you can send me a patch to check. :-)

The following is a patch to update the pm_qos code in the mm1 tree. It removes the PM_QOS_CPUIDLE parameter (replacing it with PM_CPU_DMA_LATENCY), It changes the notifications from srcu to blocking in hopes of fixing the WARNS reported by xxx, and it changes the initialization to me largely static to avoid initialization race with cpu-idle.

I think we will have to re-visit the static vrs dynamic initialization and this init race in a while to support pm_qos parameters per power domain (i.e. per cpu-socket) based on platform information (ACPI) but for now lets see if this fixes the warning's reported.

Thanks,

Signed-off-by mark gross <[email protected]>

Binary files linux-2.6.23-mm1/arch/x86_64/ia32/vsyscall-syscall.so.dbg and linux-2.6.23-mm1-pmqos/arch/x86_64/ia32/vsyscall-syscall.so.dbg differ Binary files linux-2.6.23-mm1/arch/x86_64/ia32/vsyscall-sysenter.so.dbg and linux-2.6.23-mm1-pmqos/arch/x86_64/ia32/vsyscall-sysenter.so.dbg differ Binary files linux-2.6.23-mm1/arch/x86_64/vdso/vdso.so.dbg and linux-2.6.23-mm1-pmqos/arch/x86_64/vdso/vdso.so.dbg differ

drivers/cpuidle/cpuidle.c +1 -1

diff -urN -X linux-2.6.23-mm1/Documentation/dontdiff linux-2.6.23-mm1/drivers/cpuidle/cpuidle.c linux-2.6.23-mm1-pmqos/drivers/cpuidle/cpuidle.c
@@ -268,7 +268,7 @@
 
 static inline void latency_notifier_init(struct notifier_block *n)
 {
-        pm_qos_add_notifier(PM_QOS_CPUIDLE, n);
+        pm_qos_add_notifier(PM_QOS_CPU_DMA_LATENCY, n);
 }
 
 #else /* CONFIG_SMP */

drivers/cpuidle/governors/ladder.c +1 -1

diff -urN -X linux-2.6.23-mm1/Documentation/dontdiff linux-2.6.23-mm1/drivers/cpuidle/governors/ladder.c linux-2.6.23-mm1-pmqos/drivers/cpuidle/governors/ladder.c
@@ -82,7 +82,7 @@
 	if (last_idx < dev->state_count - 1 &&
 	    last_residency > last_state->threshold.promotion_time &&
 	    dev->states[last_idx + 1].exit_latency <=
-			pm_qos_requirement(PM_QOS_CPUIDLE)) {
+			pm_qos_requirement(PM_QOS_CPU_DMA_LATENCY)) {
 		last_state->stats.promotion_count++;
 		last_state->stats.demotion_count = 0;
 		if (last_state->stats.promotion_count >= last_state->threshold.promotion_count) {

drivers/cpuidle/governors/menu.c +1 -1

diff -urN -X linux-2.6.23-mm1/Documentation/dontdiff linux-2.6.23-mm1/drivers/cpuidle/governors/menu.c linux-2.6.23-mm1-pmqos/drivers/cpuidle/governors/menu.c
@@ -48,7 +48,7 @@
 			break;
 		if (s->target_residency > data->predicted_us)
 			break;
-		if (s->exit_latency > pm_qos_requirement(PM_QOS_CPUIDLE))
+		if (s->exit_latency > pm_qos_requirement(PM_QOS_CPU_DMA_LATENCY))
 			break;
 	}

include/linux/pm_qos_params.h +1 ~~-12~~

diff -urN -X linux-2.6.23-mm1/Documentation/dontdiff linux-2.6.23-mm1/include/linux/pm_qos_params.h linux-2.6.23-mm1-pmqos/include/linux/pm_qos_params.h
@@ -6,23 +6,12 @@
 #include <linux/notifier.h>
 #include <linux/miscdevice.h>
 
-struct requirement_list {
-	struct list_head list;
-	union {
-		s32 value;
-		s32 usec;
-		s32 kbps;
-	};
-	char *name;
-};
-
 #define PM_QOS_RESERVED 0
 #define PM_QOS_CPU_DMA_LATENCY 1
 #define PM_QOS_NETWORK_LATENCY 2
 #define PM_QOS_NETWORK_THROUGHPUT 3
-#define PM_QOS_CPUIDLE 4
 
-#define PM_QOS_NUM_CLASSES 5
+#define PM_QOS_NUM_CLASSES 4
 #define PM_QOS_DEFAULT_VALUE -1
 
 int pm_qos_add_requirement(int qos, char *name, s32 value);

kernel/pm_qos_params.c +81 ~~-70~~

262 lines not on this page · raw message

Mark Gross

2007-10-17 17:21 UTC #57 lore raw

PATCH 1/1 static initialization and blocking notification for pm_qos... was Re: 2.6.23-mm1

In reply to Rafael J. Wysocki

Quoted 44 lines · Rafael J. Wysocki

Quoted 9 lines · Andrew Morton

ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.23/2.6.23-mm1/
- I've been largely avoiding applying anything since rc8-mm2 in an attempt to stabilise things for the 2.6.23 merge.
But that didn't stop all the subsystem maintainers from going nuts, with the usual accuracy. We're up to a 37MB diff now, but it seems to be working a bit better.

I get many traces similar to the one below from it (w/ hotfixes):

WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()

Call Trace:
 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
 [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2
 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
 [<ffffffff8024ee6d>] update_target+0x71/0x76
 [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2
 [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382
 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
 [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
 [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
 [<ffffffff8022f18e>] default_wake_function+0x0/0xf
 [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
 [<ffffffff80282e91>] vma_link+0xdd/0x10b
 [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
 [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
 [<ffffffff802a0896>] do_ioctl+0x2a/0x77
 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
 [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
 [<ffffffff8020bfde>] system_call+0x7e/0x83

Quoted 2 lines

Full dmesg attached.

ubject: [PATCH] static initialization and blocking notification for pm_qos... was Re: 2.6.23-mm1

please try this patch and let me know if the warnings go away. (I have not been able to reproduce your issue.)

Thanks,

Signed-off-by mark gross <[email protected]>

drivers/cpuidle/cpuidle.c +1 -1

diff -urN -X linux-2.6.23-mm1/Documentation/dontdiff linux-2.6.23-mm1/drivers/cpuidle/cpuidle.c linux-2.6.23-mm1-pmqos/drivers/cpuidle/cpuidle.c
@@ -268,7 +268,7 @@
 
 static inline void latency_notifier_init(struct notifier_block *n)
 {
-        pm_qos_add_notifier(PM_QOS_CPUIDLE, n);
+        pm_qos_add_notifier(PM_QOS_CPU_DMA_LATENCY, n);
 }
 
 #else /* CONFIG_SMP */

drivers/cpuidle/governors/ladder.c +1 -1

diff -urN -X linux-2.6.23-mm1/Documentation/dontdiff linux-2.6.23-mm1/drivers/cpuidle/governors/ladder.c linux-2.6.23-mm1-pmqos/drivers/cpuidle/governors/ladder.c
@@ -82,7 +82,7 @@
 	if (last_idx < dev->state_count - 1 &&
 	    last_residency > last_state->threshold.promotion_time &&
 	    dev->states[last_idx + 1].exit_latency <=
-			pm_qos_requirement(PM_QOS_CPUIDLE)) {
+			pm_qos_requirement(PM_QOS_CPU_DMA_LATENCY)) {
 		last_state->stats.promotion_count++;
 		last_state->stats.demotion_count = 0;
 		if (last_state->stats.promotion_count >= last_state->threshold.promotion_count) {

drivers/cpuidle/governors/menu.c +1 -1

diff -urN -X linux-2.6.23-mm1/Documentation/dontdiff linux-2.6.23-mm1/drivers/cpuidle/governors/menu.c linux-2.6.23-mm1-pmqos/drivers/cpuidle/governors/menu.c
@@ -48,7 +48,7 @@
 			break;
 		if (s->target_residency > data->predicted_us)
 			break;
-		if (s->exit_latency > pm_qos_requirement(PM_QOS_CPUIDLE))
+		if (s->exit_latency > pm_qos_requirement(PM_QOS_CPU_DMA_LATENCY))
 			break;
 	}

include/linux/pm_qos_params.h +1 ~~-12~~

diff -urN -X linux-2.6.23-mm1/Documentation/dontdiff linux-2.6.23-mm1/include/linux/pm_qos_params.h linux-2.6.23-mm1-pmqos/include/linux/pm_qos_params.h
@@ -6,23 +6,12 @@
 #include <linux/notifier.h>
 #include <linux/miscdevice.h>
 
-struct requirement_list {
-	struct list_head list;
-	union {
-		s32 value;
-		s32 usec;
-		s32 kbps;
-	};
-	char *name;
-};
-
 #define PM_QOS_RESERVED 0
 #define PM_QOS_CPU_DMA_LATENCY 1
 #define PM_QOS_NETWORK_LATENCY 2
 #define PM_QOS_NETWORK_THROUGHPUT 3
-#define PM_QOS_CPUIDLE 4
 
-#define PM_QOS_NUM_CLASSES 5
+#define PM_QOS_NUM_CLASSES 4
 #define PM_QOS_DEFAULT_VALUE -1
 
 int pm_qos_add_requirement(int qos, char *name, s32 value);

kernel/pm_qos_params.c +81 ~~-70~~

262 lines not on this page · raw message

Kamalesh Babulal

2007-10-13 04:35 UTC #58 lore raw

Re: 2.6.23-mm1 - Build failure on rgmii

In reply to Andrew Morton

Hi Andrew,

The build fails with following message

CC drivers/net/ibm_newemac/zmii.o
CC drivers/net/ibm_newemac/rgmii.o drivers/net/ibm_newemac/rgmii.c: In function ‘rgmii_probe’:
drivers/net/ibm_newemac/rgmii.c:254: error: implicit declaration of function ‘device_is_compatible’
make[3]: *** [drivers/net/ibm_newemac/rgmii.o] Error 1 make[2]: *** [drivers/net/ibm_newemac] Error 2
make[1]: *** [drivers/net] Error 2
make: *** [drivers] Error 2

The function device_is_compatible does not exist, and seems to called instead of
of_device_compatible. This patch replace the function.

Signed-off-by Kamalesh Babulal <[email protected]>

---

drivers/net/ibm_newemac/~rgmii.c 2007-10-12 14:37:21.000000000 +0530 renamed from drivers/net/ibm_newemac/rgmii.c 2007-10-12 12:10:48.000000000 +0530 +1 -1

@@ -251,7 +251,7 @@ static int __devinit rgmii_probe(struct 
        }
 
        /* Check for RGMII type */
-       if (device_is_compatible(ofdev->node, "ibm,rgmii-axon"))
+       if (of_device_is_compatible(ofdev->node, "ibm,rgmii-axon"))
                dev->type = RGMII_AXON;
        else
                dev->type = RGMII_STANDARD;

Signature · 4 lines

Thanks & Regards,
Kamalesh Babulal,
Linux Technology Center,
IBM, ISTL.

Kamalesh Babulal

2007-10-13 04:45 UTC #59 lore raw

Re: 2.6.23-mm1 - build failure with advansys

In reply to Andrew Morton

Hi Andrew,

Another build failure with following message

CC drivers/scsi/advansys.o
drivers/scsi/advansys.c:71:2: warning: #warning this driver is still not properly converted to the DMA API drivers/scsi/advansys.c: In function ‘AdvBuildCarrierFreelist’:
drivers/scsi/advansys.c:6486: error: implicit declaration of function ‘virt_to_bus’ drivers/scsi/advansys.c: In function ‘AdvInitAsc3550Driver’:
drivers/scsi/advansys.c:6974: error: implicit declaration of function ‘bus_to_virt’ drivers/scsi/advansys.c:6974: warning: cast to pointer from integer of different size drivers/scsi/advansys.c:6994: warning: cast to pointer from integer of different size drivers/scsi/advansys.c: In function ‘AdvInitAsc38C0800Driver’:
drivers/scsi/advansys.c:7450: warning: cast to pointer from integer of different size drivers/scsi/advansys.c:7471: warning: cast to pointer from integer of different size drivers/scsi/advansys.c: In function ‘AdvInitAsc38C1600Driver’:
drivers/scsi/advansys.c:7939: warning: cast to pointer from integer of different size drivers/scsi/advansys.c:7963: warning: cast to pointer from integer of different size drivers/scsi/advansys.c: In function ‘adv_isr_callback’:
drivers/scsi/advansys.c:8175: warning: cast to pointer from integer of different size drivers/scsi/advansys.c: In function ‘AdvISR’:
drivers/scsi/advansys.c:8392: warning: cast to pointer from integer of different size drivers/scsi/advansys.c:8412: warning: cast to pointer from integer of different size drivers/scsi/advansys.c: In function ‘AdvExeScsiQueue’:
drivers/scsi/advansys.c:10845: warning: cast to pointer from integer of different size make[2]: *** [drivers/scsi/advansys.o] Error 1
make[1]: *** [drivers/scsi] Error 2
make: *** [drivers] Error 2

The functions virt_to_bus and bus_to_virt are begin defined between ifdef CONFIG_PPC32 but when i compile allyesconfig with ppc64 box,i get this error. This patch removes the ifdef.

Signed-off-by Kamalesh Babulal <[email protected]>

---

include/asm-powerpc/~io.h 2007-10-12 15:46:00.000000000 +0530 renamed from include/asm-powerpc/io.h 2007-10-12 15:46:14.000000000 +0530 +0 -2

@@ -690,7 +690,6 @@ static inline void * phys_to_virt(unsign
  * drivers (shame shame shame) that use bus_to_virt() and haven't been
  * fixed yet so I need to define it here.
  */
-#ifdef CONFIG_PPC32
 
 static inline unsigned long virt_to_bus(volatile void * address)
 {

@@ -708,7 +707,6 @@ static inline void * bus_to_virt(unsigne
 
 #define page_to_bus(page)      (page_to_phys(page) + PCI_DRAM_OFFSET)
 
-#endif /* CONFIG_PPC32 */
 
 /* access ports */
 #define setbits32(_addr, _v) out_be32((_addr), in_be32(_addr) |  (_v))

Andrew Morton

author maintainer

2007-10-13 06:53 UTC #60 lore raw

Re: 2.6.23-mm1 - build failure with advansys

Quoted 30 lines · On Sat, 13 Oct 2007 10:14:22 +0530 Kamalesh Babulal…

Hi Andrew,
Another build failure with following message
CC drivers/scsi/advansys.o
drivers/scsi/advansys.c:71:2: warning: #warning this driver is still not properly converted to the DMA API drivers/scsi/advansys.c: In function ‘AdvBuildCarrierFreelist’:
drivers/scsi/advansys.c:6486: error: implicit declaration of function ‘virt_to_bus’ drivers/scsi/advansys.c: In function ‘AdvInitAsc3550Driver’:
drivers/scsi/advansys.c:6974: error: implicit declaration of function ‘bus_to_virt’ drivers/scsi/advansys.c:6974: warning: cast to pointer from integer of different size drivers/scsi/advansys.c:6994: warning: cast to pointer from integer of different size drivers/scsi/advansys.c: In function ‘AdvInitAsc38C0800Driver’:
drivers/scsi/advansys.c:7450: warning: cast to pointer from integer of different size drivers/scsi/advansys.c:7471: warning: cast to pointer from integer of different size drivers/scsi/advansys.c: In function ‘AdvInitAsc38C1600Driver’:
drivers/scsi/advansys.c:7939: warning: cast to pointer from integer of different size drivers/scsi/advansys.c:7963: warning: cast to pointer from integer of different size drivers/scsi/advansys.c: In function ‘adv_isr_callback’:
drivers/scsi/advansys.c:8175: warning: cast to pointer from integer of different size drivers/scsi/advansys.c: In function ‘AdvISR’:
drivers/scsi/advansys.c:8392: warning: cast to pointer from integer of different size drivers/scsi/advansys.c:8412: warning: cast to pointer from integer of different size drivers/scsi/advansys.c: In function ‘AdvExeScsiQueue’:
drivers/scsi/advansys.c:10845: warning: cast to pointer from integer of different size make[2]: *** [drivers/scsi/advansys.o] Error 1
make[1]: *** [drivers/scsi] Error 2
make: *** [drivers] Error 2

Quoted 3 lines

The functions virt_to_bus and bus_to_virt are begin defined between ifdef CONFIG_PPC32 but when i compile allyesconfig with ppc64 box,i get this error. This patch removes the ifdef.

Please copy the powerpc developers on powerpc patches.

Quoted 14 lines

Signed-off-by Kamalesh Babulal <[email protected]>
---
include/asm-powerpc/~io.h 2007-10-12 15:46:00.000000000 +0530 renamed from include/asm-powerpc/io.h 2007-10-12 15:46:14.000000000 +0530 +0 -1
@@ -690,7 +690,6 @@ static inline void * phys_to_virt(unsign
  * drivers (shame shame shame) that use bus_to_virt() and haven't been
  * fixed yet so I need to define it here.
  */
-#ifdef CONFIG_PPC32
 
 static inline unsigned long virt_to_bus(volatile void * address)
 {

include/asm-powerpc/~io.h 2007-10-12 15:46:00.000000000 +0530 static inline void * bus_to_virt(unsigne · line 712

Quoted 7 lines

include/asm-powerpc/~io.h 2007-10-12 15:46:00.000000000 +0530 renamed from include/asm-powerpc/io.h 2007-10-12 15:46:14.000000000 +0530 +0 -1
@@ -708,7 +707,6 @@ static inline void * bus_to_virt(unsigne
 
 #define page_to_bus(page)      (page_to_phys(page) + PCI_DRAM_OFFSET)
 
-#endif /* CONFIG_PPC32 */
 
 /* access ports */
 #define setbits32(_addr, _v) out_be32((_addr), in_be32(_addr) |  (_v))

especially ones like that ;)

Matthew has proposed that advansys should be dependent upon CONFIG_VIRT_TO_BUS. I don't think anyone's done a patch yet though.

(Actually, the code which you've altered there should probably be using CONFIG_VIRT_TO_BUS, too).

Paul Mackerras

2007-10-18 00:07 UTC #61 lore raw

Re: 2.6.23-mm1 - build failure with advansys

Quoted 5 lines · Andrew Morton

Quoted 3 lines · On Sat, 13 Oct 2007 10:14:22 +0530 Kamalesh Babulal…
The functions virt_to_bus and bus_to_virt are begin defined between ifdef CONFIG_PPC32 but when i compile allyesconfig with ppc64 box,i get this error. This patch removes the ifdef.

Which is totally bogus, because virt_to_bus/bus_to_virt only work on systems without an IOMMU. Most if not all ppc64 systems have one or more IOMMUs. This patch is nacked.

The correct fix is to make advansys depend on CONFIG_VIRT_TO_BUS, or alternatively fix advansys.c properly by making it use the interfaces described in Documentation/DMA-mapping.txt (or the equivalent scsi helpers).

Quoted 1 line

Please copy the powerpc developers on powerpc patches.

Definitely.

Paul.

Matthew Wilcox

2007-10-18 01:48 UTC #62 lore raw

Re: 2.6.23-mm1 - build failure with advansys

Quoted 4 lines · Paul Mackerras

The correct fix is to make advansys depend on CONFIG_VIRT_TO_BUS, or alternatively fix advansys.c properly by making it use the interfaces described in Documentation/DMA-mapping.txt (or the equivalent scsi helpers).

If you look at the git logs, you'll notice there's some progress towards this. It's already the case for the narrow boards. I have a patch to rip it all out for the wide boards, but there's clearly a bug because it crashes my parisc machine. Works fine on x86 though. I can't work on it this week because I'm travelling and the parisc machine with remote power died on me last week.

I think I already suggested a temporary CONFIG_VIRT_TO_BUS dependency to akpm last week.

Signature · 4 lines

Intel are signing my paycheques ... these opinions are still mine
"Bill, look, we understand that you're interested in selling us this
operating system, but compare it to ours.  We can't possibly take such
a retrograde step."

Joseph Fannin

2007-10-13 15:50 UTC #63 lore raw

Re: 2.6.23-mm1 pm_prepare() and _finish() w/ args vs. without

In reply to Andrew Morton

Quoted 2 lines · Andrew Morton

ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.23/2.6.23-mm1/

Domen Puncer's change to support "MPC5200 low power mode" (in powerpc-git, which is in Linus's tree now) adds new code calling mpc52xx_pm_prepare and _finish with suspend_state_t as an argument, while Rafael Wysocki's pm-rework-struct-platform_suspend_ops.patch converts those to take no arguments. So the build fails:

arch/powerpc/platforms/52xx/mpc52xx_pm.c:61: error: conflicting types for ‘mpc52xx_pm_prepare’

include/asm/mpc52xx.h:270: error: previous declaration of ‘mpc52xx_pm_prepare’ was here

arch/powerpc/platforms/52xx/mpc52xx_pm.c:167: error: conflicting types for ‘mpc52xx_pm_finish’

include/asm/mpc52xx.h:272: error: previous declaration of ‘mpc52xx_pm_finish’ was here

Sorting this out is beyond my abilities; I don't know how to deal with stuff like this (in arch/powerpc/platforms/52xx/lite5200_pm.c):

static int lite5200_pm_prepare(suspend_state_t state)

{
	/* deep sleep? let mpc52xx code handle that */
	if (state == PM_SUSPEND_STANDBY)
	       return mpc52xx_pm_prepare(state);

Patch authors CC'd.

--
Joseph Fannin
[email protected]

Rafael J. Wysocki

2007-10-13 17:07 UTC #64 lore raw

Re: 2.6.23-mm1 pm_prepare() and _finish() w/ args vs. without

Quoted 10 lines · Joseph Fannin

Quoted 2 lines · Andrew Morton
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.23/2.6.23-mm1/
Domen Puncer's change to support "MPC5200 low power mode" (in powerpc-git, which is in Linus's tree now) adds new code calling mpc52xx_pm_prepare and _finish with suspend_state_t as an argument, while Rafael Wysocki's pm-rework-struct-platform_suspend_ops.patch converts those to take no arguments. So the build fails:

Ouch.

I think that the appended patch is needed. Unfortunately, I can't test it here.

Greetings,
Rafael

Signed-off-by Rafael J. Wysocki <[email protected]>

---
 arch/powerpc/platforms/52xx/lite5200_pm.c |   35 +++++++++++++++++++-----------
 include/asm-powerpc/mpc52xx.h             |    4 +--
 2 files changed, 25 insertions(+), 14 deletions(-)

include/asm-powerpc/mpc52xx.h +2 -2

Index: linux-2.6.23-mm1/include/asm-powerpc/mpc52xx.h
===================================================================
@@ -267,9 +267,9 @@ extern int mpc52xx_set_wakeup_gpio(u8 pi
 extern int __init lite5200_pm_init(void);
 
 /* lite5200 calls mpc5200 suspend functions, so here they are */
-extern int mpc52xx_pm_prepare(suspend_state_t);
+extern int mpc52xx_pm_prepare(void);
 extern int mpc52xx_pm_enter(suspend_state_t);
-extern int mpc52xx_pm_finish(suspend_state_t);
+extern void mpc52xx_pm_finish(void);
 extern char saved_sram[0x4000]; /* reuse buffer from mpc52xx suspend */
 #endif
 #endif /* CONFIG_PM */

arch/powerpc/platforms/52xx/lite5200_pm.c +23 ~~-12~~

Index: linux-2.6.23-mm1/arch/powerpc/platforms/52xx/lite5200_pm.c
===================================================================
@@ -1,5 +1,5 @@
 #include <linux/init.h>
-#include <linux/pm.h>
+#include <linux/suspend.h>
 #include <asm/io.h>
 #include <asm/time.h>
 #include <asm/mpc52xx.h>

@@ -18,6 +18,8 @@ static void __iomem *sram;
 static const int sram_size = 0x4000;	/* 16 kBytes */
 static void __iomem *mbar;
 
+static suspend_state_t lite5200_pm_target_state;
+
 static int lite5200_pm_valid(suspend_state_t state)
 {
 	switch (state) {

@@ -29,13 +31,22 @@ static int lite5200_pm_valid(suspend_sta
 	}
 }
 
-static int lite5200_pm_prepare(suspend_state_t state)
+static int lite5200_pm_set_target(suspend_state_t state)
+{
+	if (lite5200_pm_valid(state)) {
+		lite5200_pm_target_state = state;
+		return 0;
+	}
+	return -EINVAL;
+}
+
+static int lite5200_pm_prepare(void)
 {
 	/* deep sleep? let mpc52xx code handle that */
-	if (state == PM_SUSPEND_STANDBY)
-		return mpc52xx_pm_prepare(state);
+	if (lite5200_pm_target_state == PM_SUSPEND_STANDBY)
+		return mpc52xx_pm_prepare();
 
-	if (state != PM_SUSPEND_MEM)
+	if (lite5200_pm_target_state != PM_SUSPEND_MEM)
 		return -EINVAL;
 
 	/* map registers */

@@ -190,24 +201,24 @@ static int lite5200_pm_enter(suspend_sta
 	return 0;
 }
 
-static int lite5200_pm_finish(suspend_state_t state)
+static void lite5200_pm_finish(void)
 {
 	/* deep sleep? let mpc52xx code handle that */
-	if (state == PM_SUSPEND_STANDBY) {
-		return mpc52xx_pm_finish(state);
+	if (lite5200_pm_target_state == PM_SUSPEND_STANDBY) {
+		mpc52xx_pm_finish();
 	}
-	return 0;
 }
 
-static struct pm_ops lite5200_pm_ops = {
+static struct platform_suspend_ops lite5200_pm_ops = {
 	.valid		= lite5200_pm_valid,
+	.set_target	= lite5200_pm_set_target,
 	.prepare	= lite5200_pm_prepare,
 	.enter		= lite5200_pm_enter,
 	.finish		= lite5200_pm_finish,
 };
 
-int __init lite5200_pm_init(void)
+int __init lite5200_suspend_init(void)
 {
-	pm_set_ops(&lite5200_pm_ops);
+	suspend_set_ops(&lite5200_pm_ops);
 	return 0;
 }

Joseph Fannin

2007-10-13 18:45 UTC #65 lore raw

Re: 2.6.23-mm1 pm_prepare() and _finish() w/ args vs. without

Quoted 20 lines · Rafael J. Wysocki

Quoted 10 lines · Joseph Fannin
Quoted 2 lines · Andrew Morton
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.23/2.6.23-mm1/
Domen Puncer's change to support "MPC5200 low power mode" (in powerpc-git, which is in Linus's tree now) adds new code calling mpc52xx_pm_prepare and _finish with suspend_state_t as an argument, while Rafael Wysocki's pm-rework-struct-platform_suspend_ops.patch converts those to take no arguments. So the build fails:
Ouch.
I think that the appended patch is needed. Unfortunately, I can't test it here.

include/asm-powerpc/mpc52xx.h extern int mpc52xx_set_wakeup_gpio(u8 pi · line 272

Quoted 8 lines

include/asm-powerpc/mpc52xx.h +2 -2

@@ -267,9 +267,9 @@ extern int mpc52xx_set_wakeup_gpio(u8 pi
 extern int __init lite5200_pm_init(void);
 
 /* lite5200 calls mpc5200 suspend functions, so here they are */
-extern int mpc52xx_pm_prepare(suspend_state_t);
+extern int mpc52xx_pm_prepare(void);
 extern int mpc52xx_pm_enter(suspend_state_t);
-extern int mpc52xx_pm_finish(suspend_state_t);
+extern void mpc52xx_pm_finish(void);

These declarations are extern, but pm-rework-struct-platform_suspend_ops.patch makes the function definitions static, which doesn't seem to be allowed.

After removing the static bits from those two functions in mpc52xx_pm.c it builds, but there are lots of warnings, which seem to be related:

CC arch/powerpc/kernel/prom.o
In file included from arch/powerpc/platforms/52xx/mpc52xx_pic.c:34:
include/asm/mpc52xx.h:271: warning: parameter names (without types) in function declaration
CC arch/powerpc/platforms/52xx/mpc52xx_common.o
arch/powerpc/kernel/prom.c: In function ‘early_init_dt_scan_chosen’:
arch/powerpc/kernel/prom.c:784: warning: assignment from incompatible pointer type
arch/powerpc/kernel/prom.c:788: warning: assignment from incompatible pointer type
In file included from arch/powerpc/platforms/52xx/mpc52xx_common.c:20:
include/asm/mpc52xx.h:271: warning: parameter names (without types) in function declaration
CC arch/powerpc/platforms/52xx/mpc52xx_pci.o
CC arch/powerpc/kernel/traps.o
In file included from arch/powerpc/platforms/52xx/mpc52xx_pci.c:16:
include/asm/mpc52xx.h:271: warning: parameter names (without types) in function declaration arch/powerpc/platforms/52xx/mpc52xx_pci.c: In function ‘mpc52xx_pci_setup’:
arch/powerpc/platforms/52xx/mpc52xx_pci.c:262: warning: format ‘%x’ expects type ‘unsigned int’, but argument 2 has type ‘resource_size_t’ arch/powerpc/platforms/52xx/mpc52xx_pci.c:262: warning: format ‘%x’ expects type ‘unsigned int’, but argument 3 has type ‘resource_size_t’ arch/powerpc/platforms/52xx/mpc52xx_pci.c:276: warning: format ‘%x’ expects type ‘unsigned int’, but argument 2 has type ‘resource_size_t’ arch/powerpc/platforms/52xx/mpc52xx_pci.c:276: warning: format ‘%x’ expects type ‘unsigned int’, but argument 3 has type ‘resource_size_t’ arch/powerpc/platforms/52xx/mpc52xx_pci.c:295: warning: cast to pointer from integer of different size arch/powerpc/platforms/52xx/mpc52xx_pci.c:295: warning: format ‘%x’ expects type ‘unsigned int’, but argument 2 has type ‘resource_size_t’ arch/powerpc/platforms/52xx/mpc52xx_pci.c:295: warning: format ‘%x’ expects type ‘unsigned int’, but argument 3 has type ‘resource_size_t’
CC arch/powerpc/platforms/52xx/efika.o
In file included from arch/powerpc/platforms/52xx/efika.c:36:
include/asm/mpc52xx.h:271: warning: parameter names (without types) in function declaration
CC arch/powerpc/kernel/setup-common.o
CC arch/powerpc/platforms/52xx/lite5200.o
In file included from arch/powerpc/platforms/52xx/lite5200.c:44:
include/asm/mpc52xx.h:271: warning: parameter names (without types) in function declaration

The build is moving though, and I don't actually have this platform -- I just can't avoid building it when building for powermac. Thanks.

--
Joseph Fannin
[email protected]

Rafael J. Wysocki

2007-10-13 18:58 UTC #66 lore raw

Re: 2.6.23-mm1 pm_prepare() and _finish() w/ args vs. without

Quoted 23 lines · Joseph Fannin

Quoted 22 lines · Rafael J. Wysocki
Quoted 10 lines · Joseph Fannin
Quoted 2 lines · Andrew Morton
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.23/2.6.23-mm1/
Domen Puncer's change to support "MPC5200 low power mode" (in powerpc-git, which is in Linus's tree now) adds new code calling mpc52xx_pm_prepare and _finish with suspend_state_t as an argument, while Rafael Wysocki's pm-rework-struct-platform_suspend_ops.patch converts those to take no arguments. So the build fails:
Ouch.
I think that the appended patch is needed. Unfortunately, I can't test it here.
include/asm-powerpc/mpc52xx.h +0 -0
@@ -267,9 +267,9 @@ extern int mpc52xx_set_wakeup_gpio(u8 pi
 extern int __init lite5200_pm_init(void);
 

Quoted 10 lines

include/asm-powerpc/mpc52xx.h extern int mpc52xx_set_wakeup_gpio(u8 pi · line 272
Quoted 6 lines
include/asm-powerpc/mpc52xx.h +2 -2
 /* lite5200 calls mpc5200 suspend functions, so here they are */
-extern int mpc52xx_pm_prepare(suspend_state_t);
+extern int mpc52xx_pm_prepare(void);
 extern int mpc52xx_pm_enter(suspend_state_t);
-extern int mpc52xx_pm_finish(suspend_state_t);
+extern void mpc52xx_pm_finish(void);
These declarations are extern, but pm-rework-struct-platform_suspend_ops.patch makes the function definitions static, which doesn't seem to be allowed.

Yes. Corrected patch follows.

Quoted 3 lines

After removing the static bits from those two functions in mpc52xx_pm.c it builds, but there are lots of warnings, which seem to be related:

Well, suspend_state_t is undefined in mpc52xx.h . I've added #include <linux/suspend.h> to the corrected patch below, although I'm not sure if that's the right thing to do here.

Greetings,
Rafael

Signed-off-by Rafael J. Wysocki <[email protected]>

---
 arch/powerpc/platforms/52xx/lite5200_pm.c |   35 +++++++++++++++++++-----------
 arch/powerpc/platforms/52xx/mpc52xx_pm.c  |    4 +--
 include/asm-powerpc/mpc52xx.h             |    6 +++--
 3 files changed, 29 insertions(+), 16 deletions(-)

include/asm-powerpc/mpc52xx.h +4 -2

Index: linux-2.6.23-mm1/include/asm-powerpc/mpc52xx.h
===================================================================
@@ -18,6 +18,8 @@
 #include <asm/prom.h>
 #endif /* __ASSEMBLY__ */
 
+#include <linux/suspend.h>
+
 
 /* ======================================================================== */
 /* Structures mapping of some unit register set                             */

@@ -267,9 +269,9 @@ extern int mpc52xx_set_wakeup_gpio(u8 pi
 extern int __init lite5200_pm_init(void);
 
 /* lite5200 calls mpc5200 suspend functions, so here they are */
-extern int mpc52xx_pm_prepare(suspend_state_t);
+extern int mpc52xx_pm_prepare(void);
 extern int mpc52xx_pm_enter(suspend_state_t);
-extern int mpc52xx_pm_finish(suspend_state_t);
+extern void mpc52xx_pm_finish(void);
 extern char saved_sram[0x4000]; /* reuse buffer from mpc52xx suspend */
 #endif
 #endif /* CONFIG_PM */

arch/powerpc/platforms/52xx/lite5200_pm.c +23 ~~-12~~

Index: linux-2.6.23-mm1/arch/powerpc/platforms/52xx/lite5200_pm.c
===================================================================
@@ -1,5 +1,5 @@
 #include <linux/init.h>
-#include <linux/pm.h>
+#include <linux/suspend.h>
 #include <asm/io.h>
 #include <asm/time.h>
 #include <asm/mpc52xx.h>

@@ -18,6 +18,8 @@ static void __iomem *sram;
 static const int sram_size = 0x4000;	/* 16 kBytes */
 static void __iomem *mbar;
 
+static suspend_state_t lite5200_pm_target_state;
+
 static int lite5200_pm_valid(suspend_state_t state)
 {
 	switch (state) {

@@ -29,13 +31,22 @@ static int lite5200_pm_valid(suspend_sta
 	}
 }
 
-static int lite5200_pm_prepare(suspend_state_t state)
+static int lite5200_pm_set_target(suspend_state_t state)
+{
+	if (lite5200_pm_valid(state)) {
+		lite5200_pm_target_state = state;
+		return 0;
+	}
+	return -EINVAL;
+}
+
+static int lite5200_pm_prepare(void)
 {
 	/* deep sleep? let mpc52xx code handle that */
-	if (state == PM_SUSPEND_STANDBY)
-		return mpc52xx_pm_prepare(state);
+	if (lite5200_pm_target_state == PM_SUSPEND_STANDBY)
+		return mpc52xx_pm_prepare();
 
-	if (state != PM_SUSPEND_MEM)
+	if (lite5200_pm_target_state != PM_SUSPEND_MEM)
 		return -EINVAL;
 
 	/* map registers */

@@ -190,24 +201,24 @@ static int lite5200_pm_enter(suspend_sta
 	return 0;
 }
 
-static int lite5200_pm_finish(suspend_state_t state)
+static void lite5200_pm_finish(void)
 {
 	/* deep sleep? let mpc52xx code handle that */
-	if (state == PM_SUSPEND_STANDBY) {
-		return mpc52xx_pm_finish(state);
+	if (lite5200_pm_target_state == PM_SUSPEND_STANDBY) {
+		mpc52xx_pm_finish();
 	}
-	return 0;
 }
 
-static struct pm_ops lite5200_pm_ops = {
+static struct platform_suspend_ops lite5200_pm_ops = {
 	.valid		= lite5200_pm_valid,
+	.set_target	= lite5200_pm_set_target,
 	.prepare	= lite5200_pm_prepare,
 	.enter		= lite5200_pm_enter,
 	.finish		= lite5200_pm_finish,
 };
 
-int __init lite5200_pm_init(void)
+int __init lite5200_suspend_init(void)
 {
-	pm_set_ops(&lite5200_pm_ops);
+	suspend_set_ops(&lite5200_pm_ops);
 	return 0;
 }

arch/powerpc/platforms/52xx/mpc52xx_pm.c +2 -2

Index: linux-2.6.23-mm1/arch/powerpc/platforms/52xx/mpc52xx_pm.c
===================================================================
@@ -57,7 +57,7 @@ int mpc52xx_set_wakeup_gpio(u8 pin, u8 l
 	return 0;
 }
 
-static int mpc52xx_pm_prepare(void)
+int mpc52xx_pm_prepare(void)
 {
 	/* map the whole register space */
 	mbar = mpc52xx_find_and_map("mpc5200");

@@ -163,7 +163,7 @@ int mpc52xx_pm_enter(suspend_state_t sta
 	return 0;
 }
 
-static void mpc52xx_pm_finish(void)
+void mpc52xx_pm_finish(void)
 {
 	/* call board resume code */
 	if (mpc52xx_suspend.board_resume_finish)

Joseph Fannin

2007-10-14 19:47 UTC #67 lore raw

Re: 2.6.23-mm1 pm_prepare() and _finish() w/ args vs. without

Quoted 1 line · Rafael J. Wysocki

Yes. Corrected patch follows.

A bit more is needed due to the rename of lite5200_pm_init() to lite5200_suspend_init(). An amended patch follows that builds and boots on my powermac.

---

arch/powerpc/platforms/52xx/lite5200.c +1 -1

diff -aurN linux-2.6.23-mm1.orig/arch/powerpc/platforms/52xx/lite5200.c linux-2.6.23-mm1/arch/powerpc/platforms/52xx/lite5200.c
@@ -126,7 +126,7 @@
 #ifdef CONFIG_PM
 	mpc52xx_suspend.board_suspend_prepare = lite5200_suspend_prepare;
 	mpc52xx_suspend.board_resume_finish = lite5200_resume_finish;
-	lite5200_pm_init();
+	lite5200_suspend_init();
 #endif
 
 #ifdef CONFIG_PCI

arch/powerpc/platforms/52xx/lite5200_pm.c +23 ~~-12~~

diff -aurN linux-2.6.23-mm1.orig/arch/powerpc/platforms/52xx/lite5200_pm.c linux-2.6.23-mm1/arch/powerpc/platforms/52xx/lite5200_pm.c
@@ -1,5 +1,5 @@
 #include <linux/init.h>
-#include <linux/pm.h>
+#include <linux/suspend.h>
 #include <asm/io.h>
 #include <asm/time.h>
 #include <asm/mpc52xx.h>

@@ -18,6 +18,8 @@
 static const int sram_size = 0x4000;	/* 16 kBytes */
 static void __iomem *mbar;
 
+static suspend_state_t lite5200_pm_target_state;
+
 static int lite5200_pm_valid(suspend_state_t state)
 {
 	switch (state) {

@@ -29,13 +31,22 @@
 	}
 }
 
-static int lite5200_pm_prepare(suspend_state_t state)
+static int lite5200_pm_set_target(suspend_state_t state)
+{
+	if (lite5200_pm_valid(state)) {
+		lite5200_pm_target_state = state;
+		return 0;
+	}
+	return -EINVAL;
+}
+
+static int lite5200_pm_prepare(void)
 {
 	/* deep sleep? let mpc52xx code handle that */
-	if (state == PM_SUSPEND_STANDBY)
-		return mpc52xx_pm_prepare(state);
+	if (lite5200_pm_target_state == PM_SUSPEND_STANDBY)
+		return mpc52xx_pm_prepare();
 
-	if (state != PM_SUSPEND_MEM)
+	if (lite5200_pm_target_state != PM_SUSPEND_MEM)
 		return -EINVAL;
 
 	/* map registers */

@@ -190,24 +201,24 @@
 	return 0;
 }
 
-static int lite5200_pm_finish(suspend_state_t state)
+static void lite5200_pm_finish(void)
 {
 	/* deep sleep? let mpc52xx code handle that */
-	if (state == PM_SUSPEND_STANDBY) {
-		return mpc52xx_pm_finish(state);
+	if (lite5200_pm_target_state == PM_SUSPEND_STANDBY) {
+		mpc52xx_pm_finish();
 	}
-	return 0;
 }
 
-static struct pm_ops lite5200_pm_ops = {
+static struct platform_suspend_ops lite5200_pm_ops = {
 	.valid		= lite5200_pm_valid,
+	.set_target	= lite5200_pm_set_target,
 	.prepare	= lite5200_pm_prepare,
 	.enter		= lite5200_pm_enter,
 	.finish		= lite5200_pm_finish,
 };
 
-int __init lite5200_pm_init(void)
+int __init lite5200_suspend_init(void)
 {
-	pm_set_ops(&lite5200_pm_ops);
+	suspend_set_ops(&lite5200_pm_ops);
 	return 0;
 }

arch/powerpc/platforms/52xx/mpc52xx_pm.c +2 -2

diff -aurN linux-2.6.23-mm1.orig/arch/powerpc/platforms/52xx/mpc52xx_pm.c linux-2.6.23-mm1/arch/powerpc/platforms/52xx/mpc52xx_pm.c
@@ -57,7 +57,7 @@
 	return 0;
 }
 
-static int mpc52xx_pm_prepare(void)
+int mpc52xx_pm_prepare(void)
 {
 	/* map the whole register space */
 	mbar = mpc52xx_find_and_map("mpc5200");

@@ -163,7 +163,7 @@
 	return 0;
 }
 
-static void mpc52xx_pm_finish(void)
+void mpc52xx_pm_finish(void)
 {
 	/* call board resume code */
 	if (mpc52xx_suspend.board_resume_finish)

include/asm-powerpc/mpc52xx.h +5 -3

diff -aurN linux-2.6.23-mm1.orig/include/asm-powerpc/mpc52xx.h linux-2.6.23-mm1/include/asm-powerpc/mpc52xx.h
@@ -18,6 +18,8 @@
 #include <asm/prom.h>
 #endif /* __ASSEMBLY__ */
 
+#include <linux/suspend.h>
+
 
 /* ======================================================================== */
 /* Structures mapping of some unit register set                             */

@@ -264,12 +266,12 @@
 extern int mpc52xx_set_wakeup_gpio(u8 pin, u8 level);
 
 #ifdef CONFIG_PPC_LITE5200
-extern int __init lite5200_pm_init(void);
+extern int __init lite5200_suspend_init(void);
 
 /* lite5200 calls mpc5200 suspend functions, so here they are */
-extern int mpc52xx_pm_prepare(suspend_state_t);
+extern int mpc52xx_pm_prepare(void);
 extern int mpc52xx_pm_enter(suspend_state_t);
-extern int mpc52xx_pm_finish(suspend_state_t);
+extern void mpc52xx_pm_finish(void);
 extern char saved_sram[0x4000]; /* reuse buffer from mpc52xx suspend */
 #endif
 #endif /* CONFIG_PM */

--
Joseph Fannin
[email protected]

Rafael J. Wysocki

2007-10-14 20:05 UTC #68 lore raw

Re: 2.6.23-mm1 pm_prepare() and _finish() w/ args vs. without

Quoted 6 lines · Joseph Fannin

Quoted 1 line · Rafael J. Wysocki
Yes. Corrected patch follows.
A bit more is needed due to the rename of lite5200_pm_init() to lite5200_suspend_init().

Well, I didn't intend to change it. :-)

Quoted 1 line

An amended patch follows that builds and boots on my powermac.

Thanks.

Can you please try the alternative one below?

I just removed the renaming of lite5200_pm_init() from it.

Greetings,
Rafael

Signed-off-by Rafael J. Wysocki <[email protected]>

---
 arch/powerpc/platforms/52xx/lite5200_pm.c |   33 ++++++++++++++++++++----------
 arch/powerpc/platforms/52xx/mpc52xx_pm.c  |    4 +--
 include/asm-powerpc/mpc52xx.h             |    6 +++--
 3 files changed, 28 insertions(+), 15 deletions(-)

include/asm-powerpc/mpc52xx.h +4 -2

Index: linux-2.6.23-mm1/include/asm-powerpc/mpc52xx.h
===================================================================
@@ -18,6 +18,8 @@
 #include <asm/prom.h>
 #endif /* __ASSEMBLY__ */
 
+#include <linux/suspend.h>
+
 
 /* ======================================================================== */
 /* Structures mapping of some unit register set                             */

@@ -267,9 +269,9 @@ extern int mpc52xx_set_wakeup_gpio(u8 pi
 extern int __init lite5200_pm_init(void);
 
 /* lite5200 calls mpc5200 suspend functions, so here they are */
-extern int mpc52xx_pm_prepare(suspend_state_t);
+extern int mpc52xx_pm_prepare(void);
 extern int mpc52xx_pm_enter(suspend_state_t);
-extern int mpc52xx_pm_finish(suspend_state_t);
+extern void mpc52xx_pm_finish(void);
 extern char saved_sram[0x4000]; /* reuse buffer from mpc52xx suspend */
 #endif
 #endif /* CONFIG_PM */

arch/powerpc/platforms/52xx/lite5200_pm.c +22 ~~-11~~

Index: linux-2.6.23-mm1/arch/powerpc/platforms/52xx/lite5200_pm.c
===================================================================
@@ -1,5 +1,5 @@
 #include <linux/init.h>
-#include <linux/pm.h>
+#include <linux/suspend.h>
 #include <asm/io.h>
 #include <asm/time.h>
 #include <asm/mpc52xx.h>

@@ -18,6 +18,8 @@ static void __iomem *sram;
 static const int sram_size = 0x4000;	/* 16 kBytes */
 static void __iomem *mbar;
 
+static suspend_state_t lite5200_pm_target_state;
+
 static int lite5200_pm_valid(suspend_state_t state)
 {
 	switch (state) {

@@ -29,13 +31,22 @@ static int lite5200_pm_valid(suspend_sta
 	}
 }
 
-static int lite5200_pm_prepare(suspend_state_t state)
+static int lite5200_pm_set_target(suspend_state_t state)
+{
+	if (lite5200_pm_valid(state)) {
+		lite5200_pm_target_state = state;
+		return 0;
+	}
+	return -EINVAL;
+}
+
+static int lite5200_pm_prepare(void)
 {
 	/* deep sleep? let mpc52xx code handle that */
-	if (state == PM_SUSPEND_STANDBY)
-		return mpc52xx_pm_prepare(state);
+	if (lite5200_pm_target_state == PM_SUSPEND_STANDBY)
+		return mpc52xx_pm_prepare();
 
-	if (state != PM_SUSPEND_MEM)
+	if (lite5200_pm_target_state != PM_SUSPEND_MEM)
 		return -EINVAL;
 
 	/* map registers */

@@ -190,17 +201,17 @@ static int lite5200_pm_enter(suspend_sta
 	return 0;
 }
 
-static int lite5200_pm_finish(suspend_state_t state)
+static void lite5200_pm_finish(void)
 {
 	/* deep sleep? let mpc52xx code handle that */
-	if (state == PM_SUSPEND_STANDBY) {
-		return mpc52xx_pm_finish(state);
+	if (lite5200_pm_target_state == PM_SUSPEND_STANDBY) {
+		mpc52xx_pm_finish();
 	}
-	return 0;
 }
 
-static struct pm_ops lite5200_pm_ops = {
+static struct platform_suspend_ops lite5200_pm_ops = {
 	.valid		= lite5200_pm_valid,
+	.set_target	= lite5200_pm_set_target,
 	.prepare	= lite5200_pm_prepare,
 	.enter		= lite5200_pm_enter,
 	.finish		= lite5200_pm_finish,

@@ -208,6 +219,6 @@ static struct pm_ops lite5200_pm_ops = {
 
 int __init lite5200_pm_init(void)
 {
-	pm_set_ops(&lite5200_pm_ops);
+	suspend_set_ops(&lite5200_pm_ops);
 	return 0;
 }

arch/powerpc/platforms/52xx/mpc52xx_pm.c +2 -2

Index: linux-2.6.23-mm1/arch/powerpc/platforms/52xx/mpc52xx_pm.c
===================================================================
@@ -57,7 +57,7 @@ int mpc52xx_set_wakeup_gpio(u8 pin, u8 l
 	return 0;
 }
 
-static int mpc52xx_pm_prepare(void)
+int mpc52xx_pm_prepare(void)
 {
 	/* map the whole register space */
 	mbar = mpc52xx_find_and_map("mpc5200");

@@ -163,7 +163,7 @@ int mpc52xx_pm_enter(suspend_state_t sta
 	return 0;
 }
 
-static void mpc52xx_pm_finish(void)
+void mpc52xx_pm_finish(void)
 {
 	/* call board resume code */
 	if (mpc52xx_suspend.board_resume_finish)

Rafael J. Wysocki

2007-10-15 20:39 UTC #69 lore raw

Re: 2.6.23-mm1 pm_prepare() and _finish() w/ args vs. without

Quoted 10 lines · Rafael J. Wysocki

Quoted 6 lines · Joseph Fannin
Quoted 1 line · Rafael J. Wysocki
Yes. Corrected patch follows.
A bit more is needed due to the rename of lite5200_pm_init() to lite5200_suspend_init().
Well, I didn't intend to change it. :-)

Quoted 7 lines

Quoted 1 line
An amended patch follows that builds and boots on my powermac.
Thanks.
Can you please try the alternative one below?
I just removed the renaming of lite5200_pm_init() from it.

Well, from the lack of response I gather it works. :-)

I'm going to send it in a separate thread with a changelog. Please object if it doesn't work.

Greetings,
Rafael

Joseph Fannin

2007-10-16 17:30 UTC #70 lore raw

Re: 2.6.23-mm1 pm_prepare() and _finish() w/ args vs. without

Quoted 15 lines · Rafael J. Wysocki

Quoted 14 lines · Rafael J. Wysocki
Quoted 6 lines · Joseph Fannin
Quoted 1 line · Rafael J. Wysocki
Yes. Corrected patch follows.
A bit more is needed due to the rename of lite5200_pm_init() to lite5200_suspend_init().
Well, I didn't intend to change it. :-)
Quoted 1 line
An amended patch follows that builds and boots on my powermac.
Thanks.

Quoted 8 lines

Quoted 3 lines
Can you please try the alternative one below?
I just removed the renaming of lite5200_pm_init() from it.
Well, from the lack of response I gather it works. :-)
I'm going to send it in a separate thread with a changelog. Please object if it doesn't work.

This patch builds and boots on my powermac. Also, I checked, and the remaning warnings from gcc in this general area are also present in Linus's -git.

Quoted 2 lines

Greetings,
Rafael

Thanks!

--
Joseph Fannin
[email protected]

Gabriel C

2007-10-13 17:16 UTC #71 lore raw

In reply to Andrew Morton

Andrew Morton wrote:

Hi,

Quoted 8 lines

ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.23/2.6.23-mm1/
- I've been largely avoiding applying anything since rc8-mm2 in an attempt to stabilise things for the 2.6.23 merge.
But that didn't stop all the subsystem maintainers from going nuts, with the usual accuracy. We're up to a 37MB diff now, but it seems to be working a bit better.

Works a bit better right :) At least it boots here but I have a strange problem with it.

It seems 2.6.23-mm1 kills off java. Every program needs java here does not work anymore telling 'my java' installation is incorrect. Also I noticed firefox is acting weird as well thunderbird. Gtk apps just random freeze and need be killed with -11.

Running 'java -version' manually returns nothing , 'java -jar some.jar' does nothing as well. ( not even a error or anything else )

( I've also tested sun's java 1.5 and 1.6 and openjre as well all with same result )

I only have a WARNING in my dmesg but i don't think this is related to this :

Oct 13 01:44:52 lara [10722.146448] WARNING: at fs/namespace.c:586 __mntput()
Oct 13 01:44:52 lara [10722.146478]  [<c0167cb2>] mntput_no_expire+0x5d/0xab
Oct 13 01:44:52 lara [10722.146503]  [<c01683d1>] sys_umount+0x1f8/0x202
Oct 13 01:44:52 lara [10722.146511]  [<c010f368>] check_pgt_cache+0x13/0x15
Oct 13 01:44:52 lara [10722.146529]  [<c0158cd0>] sys_stat64+0xf/0x23
Oct 13 01:44:52 lara [10722.146549]  [<c0147a9c>] remove_vma+0x31/0x36
Oct 13 01:44:52 lara [10722.146574]  [<c010fbf6>] do_page_fault+0x180/0x4ea
Oct 13 01:44:52 lara [10722.146600]  [<c01683e6>] sys_oldumount+0xb/0xe
Oct 13 01:44:52 lara [10722.146614]  [<c010258e>] sysenter_past_esp+0x5f/0x85
Oct 13 01:44:52 lara [10722.146639]  [<c02e0000>] xfrm_tmpl_resolve+0x2bd/0x37b
Oct 13 01:44:52 lara [10722.146656]  =======================

I also noticed some programs like vlc segfaults :

vlc[20506]: segfault at 01950000 eip 01950000 esp b4876368 error 4

Booting 2.6.23 makes all these go away.

I don't have anything else in my logs. Any idea what patches could cause this problem(s) ?

Config can be found there -> http://194.231.229.228/2.6.23-mm1-config

Regards,

Gabriel C

Andrew Morton

author maintainer

2007-10-13 18:02 UTC #72 lore raw

Quoted 15 lines · On Sat, 13 Oct 2007 19:12:49 +0200 Gabriel C <[email protected]> wrote:

Andrew Morton wrote:
Hi,
Quoted 8 lines
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.23/2.6.23-mm1/
- I've been largely avoiding applying anything since rc8-mm2 in an attempt to stabilise things for the 2.6.23 merge.
But that didn't stop all the subsystem maintainers from going nuts, with the usual accuracy. We're up to a 37MB diff now, but it seems to be working a bit better.
Works a bit better right :) At least it boots here but I have a strange problem with it.

Quoted 7 lines

It seems 2.6.23-mm1 kills off java. Every program needs java here does not work anymore telling 'my java' installation is incorrect. Also I noticed firefox is acting weird as well thunderbird. Gtk apps just random freeze and need be killed with -11.
Running 'java -version' manually returns nothing , 'java -jar some.jar' does nothing as well. ( not even a error or anything else )
( I've also tested sun's java 1.5 and 1.6 and openjre as well all with same result )

We have a screwup in thread handling which might have caused this.

Quoted 13 lines

I only have a WARNING in my dmesg but i don't think this is related to this :

Oct 13 01:44:52 lara [10722.146448] WARNING: at fs/namespace.c:586 __mntput()
Oct 13 01:44:52 lara [10722.146478]  [<c0167cb2>] mntput_no_expire+0x5d/0xab
Oct 13 01:44:52 lara [10722.146503]  [<c01683d1>] sys_umount+0x1f8/0x202
Oct 13 01:44:52 lara [10722.146511]  [<c010f368>] check_pgt_cache+0x13/0x15
Oct 13 01:44:52 lara [10722.146529]  [<c0158cd0>] sys_stat64+0xf/0x23
Oct 13 01:44:52 lara [10722.146549]  [<c0147a9c>] remove_vma+0x31/0x36
Oct 13 01:44:52 lara [10722.146574]  [<c010fbf6>] do_page_fault+0x180/0x4ea
Oct 13 01:44:52 lara [10722.146600]  [<c01683e6>] sys_oldumount+0xb/0xe
Oct 13 01:44:52 lara [10722.146614]  [<c010258e>] sysenter_past_esp+0x5f/0x85
Oct 13 01:44:52 lara [10722.146639]  [<c02e0000>] xfrm_tmpl_resolve+0x2bd/0x37b
Oct 13 01:44:52 lara [10722.146656]  =======================

I guess that's the r-o-bind-mounts stuff.

Quoted 10 lines

I also noticed some programs like vlc segfaults :
vlc[20506]: segfault at 01950000 eip 01950000 esp b4876368 error 4
Booting 2.6.23 makes all these go away.
I don't have anything else in my logs. Any idea what patches could cause this problem(s) ?
Config can be found there -> http://194.231.229.228/2.6.23-mm1-config

what is vlc?

Gabriel C

2007-10-13 18:11 UTC #73 lore raw

Quoted 46 lines · Andrew Morton

Quoted 14 lines · On Sat, 13 Oct 2007 19:12:49 +0200 Gabriel C <[email protected]> wrote:
Andrew Morton wrote:
Hi,
Quoted 8 lines
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.23/2.6.23-mm1/
- I've been largely avoiding applying anything since rc8-mm2 in an attempt to stabilise things for the 2.6.23 merge.
But that didn't stop all the subsystem maintainers from going nuts, with the usual accuracy. We're up to a 37MB diff now, but it seems to be working a bit better.
Works a bit better right :) At least it boots here but I have a strange problem with it.
Quoted 7 lines
It seems 2.6.23-mm1 kills off java. Every program needs java here does not work anymore telling 'my java' installation is incorrect. Also I noticed firefox is acting weird as well thunderbird. Gtk apps just random freeze and need be killed with -11.
Running 'java -version' manually returns nothing , 'java -jar some.jar' does nothing as well. ( not even a error or anything else )
( I've also tested sun's java 1.5 and 1.6 and openjre as well all with same result )
We have a screwup in thread handling which might have caused this.
Quoted 13 lines
I only have a WARNING in my dmesg but i don't think this is related to this :
Oct 13 01:44:52 lara [10722.146448] WARNING: at fs/namespace.c:586 __mntput()
Oct 13 01:44:52 lara [10722.146478]  [<c0167cb2>] mntput_no_expire+0x5d/0xab
Oct 13 01:44:52 lara [10722.146503]  [<c01683d1>] sys_umount+0x1f8/0x202
Oct 13 01:44:52 lara [10722.146511]  [<c010f368>] check_pgt_cache+0x13/0x15
Oct 13 01:44:52 lara [10722.146529]  [<c0158cd0>] sys_stat64+0xf/0x23
Oct 13 01:44:52 lara [10722.146549]  [<c0147a9c>] remove_vma+0x31/0x36
Oct 13 01:44:52 lara [10722.146574]  [<c010fbf6>] do_page_fault+0x180/0x4ea
Oct 13 01:44:52 lara [10722.146600]  [<c01683e6>] sys_oldumount+0xb/0xe
Oct 13 01:44:52 lara [10722.146614]  [<c010258e>] sysenter_past_esp+0x5f/0x85
Oct 13 01:44:52 lara [10722.146639]  [<c02e0000>] xfrm_tmpl_resolve+0x2bd/0x37b
Oct 13 01:44:52 lara [10722.146656]  =======================
I guess that's the r-o-bind-mounts stuff.
Quoted 4 lines
I also noticed some programs like vlc segfaults :
vlc[20506]: segfault at 01950000 eip 01950000 esp b4876368 error 4

Quoted 7 lines

Quoted 5 lines
Booting 2.6.23 makes all these go away.
I don't have anything else in my logs. Any idea what patches could cause this problem(s) ?
Config can be found there -> http://194.231.229.228/2.6.23-mm1-config
what is vlc?

Media player -> http://www.videolan.org/vlc/