WARNING: at net/core/dev.c:2161 net_rx_action()
got this warning with Linus' latest -git tree:
WARNING: at net/core/dev.c:2161 net_rx_action() [<80564db4>] net_rx_action+0xce/0x186 [<8011ba98>] __do_softirq+0x6c/0xcf [<8011bb2d>] do_softirq+0x32/0x36 [<8011bcae>] irq_exit+0x35/0x40 [<80104fdb>] do_IRQ+0x5c/0x71 [<801048cd>] do_nmi+0x8f/0x238 [<801033a3>] common_interrupt+0x23/0x30 =======================
box is operating fine otherwise. config and bootlog attached. This warning got introduced by:
commit bea3348eef27e6044b6161fd04c3152215f96411
Author: Stephen Hemminger <[email protected]>
Date: Wed Oct 3 16:41:36 2007 -0700
[NET]: Make NAPI polling independent of struct net_device objects.
Ingo
#
# Automatically generated make config: don't edit # Linux kernel version: 2.6.23
# Mon Oct 15 13:16:46 2007
#CONFIG_X86_32=yCONFIG_GENERIC_TIME=yCONFIG_GENERIC_CMOS_UPDATE=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_SEMAPHORE_SLEEPERS=yCONFIG_X86=yCONFIG_MMU=yCONFIG_ZONE_DMA=yCONFIG_QUICKLIST=yCONFIG_GENERIC_ISA_DMA=yCONFIG_GENERIC_IOMAP=yCONFIG_GENERIC_HWEIGHT=y CONFIG_ARCH_MAY_HAVE_PC_FDC=yCONFIG_DMI=yCONFIG_BOOTPARAM_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#CONFIG_EXPERIMENTAL=yCONFIG_LOCK_KERNEL=yCONFIG_INIT_ENV_ARG_LIMIT=32CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not setCONFIG_SWAP=y
# CONFIG_SYSVIPC is not setCONFIG_POSIX_MQUEUE=yCONFIG_BSD_PROCESS_ACCT=yCONFIG_BSD_PROCESS_ACCT_V3=y
# CONFIG_TASKSTATS is not set
# CONFIG_USER_NS is not setCONFIG_AUDIT=y
# CONFIG_AUDITSYSCALL is not set
# CONFIG_IKCONFIG is not setCONFIG_LOG_BUF_SHIFT=20
# CONFIG_CPUSETS is not set
# CONFIG_BOOTPARAM_MAXCPUS_1 is not set
# CONFIG_BOOTPARAM_NOSMP is not setCONFIG_FAIR_GROUP_SCHED=yCONFIG_FAIR_USER_SCHED=yCONFIG_SYSFS_DEPRECATED=yCONFIG_RELAY=y
# CONFIG_BLK_DEV_INITRD is not setCONFIG_CC_OPTIMIZE_FOR_SIZE=yCONFIG_SYSCTL=yCONFIG_EMBEDDED=yCONFIG_UID16=yCONFIG_SYSCTL_SYSCALL=yCONFIG_KALLSYMS=yCONFIG_KALLSYMS_ALL=yCONFIG_KALLSYMS_EXTRA_PASS=y
# CONFIG_HOTPLUG is not setCONFIG_PRINTK=y
# CONFIG_BUG is not set
# CONFIG_ELF_CORE is not set
# CONFIG_BASE_FULL is not setCONFIG_FUTEX=y
# CONFIG_EPOLL is not set
# CONFIG_SIGNALFD is not set
# CONFIG_EVENTFD is not setCONFIG_SHMEM=yCONFIG_VM_EVENT_COUNTERS=y
# CONFIG_SLAB is not set
# CONFIG_SLUB is not setCONFIG_SLOB=yCONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not setCONFIG_BASE_SMALL=1
# CONFIG_MODULES is not setCONFIG_STOP_MACHINE=yCONFIG_BLOCK=y
# CONFIG_LBD is not setCONFIG_BLK_DEV_IO_TRACE=yCONFIG_LSF=y
# CONFIG_BLK_DEV_BSG is not set
#
# IO Schedulers
#CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not setCONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not setCONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not setCONFIG_DEFAULT_IOSCHED="cfq"
#
# Processor type and features
#
# CONFIG_TICK_ONESHOT is not set
# CONFIG_NO_HZ is not set
# CONFIG_BOOTPARAM_NO_HZ_OFF is not set
# CONFIG_HIGH_RES_TIMERS is not setCONFIG_GENERIC_CLOCKEVENTS_BUILD=yCONFIG_BOOTPARAM_HIGHRES_OFF=yCONFIG_SMP=y
# CONFIG_X86_PC is not set
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not setCONFIG_X86_SUMMIT=y
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not setCONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT is not setCONFIG_X86_CYCLONE_TIMER=y
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MCORE2 is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not setCONFIG_MCRUSOE=y
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_X86_GENERIC is not setCONFIG_X86_CMPXCHG=yCONFIG_X86_L1_CACHE_SHIFT=5CONFIG_X86_XADD=yCONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not setCONFIG_GENERIC_CALIBRATE_DELAY=yCONFIG_X86_WP_WORKS_OK=yCONFIG_X86_INVLPG=yCONFIG_X86_BSWAP=yCONFIG_X86_POPAD_OK=yCONFIG_X86_TSC=yCONFIG_X86_MINIMUM_CPU_FAMILY=4CONFIG_HPET_TIMER=yCONFIG_NR_CPUS=32CONFIG_SCHED_SMT=yCONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not setCONFIG_PREEMPT=y
# CONFIG_PREEMPT_BKL is not setCONFIG_X86_LOCAL_APIC=yCONFIG_X86_IO_APIC=y
# CONFIG_X86_MCE is not set
# CONFIG_VM86 is not setCONFIG_TOSHIBA=y
# CONFIG_I8K is not set
# CONFIG_X86_REBOOTFIXUPS is not setCONFIG_MICROCODE=yCONFIG_MICROCODE_OLD_INTERFACE=yCONFIG_X86_MSR=yCONFIG_X86_CPUID=y
#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not setCONFIG_DMIID=y
# CONFIG_NOHIGHMEM is not set
# CONFIG_HIGHMEM4G is not setCONFIG_HIGHMEM64G=y
# CONFIG_VMSPLIT_3G is not set
# CONFIG_VMSPLIT_3G_OPT is not set
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_2G_OPT is not setCONFIG_VMSPLIT_1G=yCONFIG_PAGE_OFFSET=0x40000000CONFIG_HIGHMEM=yCONFIG_X86_PAE=y
#
# NUMA (Summit) requires SMP, 64GB highmem support, ACPI #CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=yCONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_RESOURCES_64BIT=yCONFIG_ZONE_DMA_FLAG=1CONFIG_BOUNCE=yCONFIG_NR_QUICK=1CONFIG_VIRT_TO_BUS=yCONFIG_HIGHPTE=yCONFIG_MATH_EMULATION=y
# CONFIG_MTRR is not setCONFIG_IRQBALANCE=yCONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not setCONFIG_HZ_300=y
# CONFIG_HZ_1000 is not setCONFIG_HZ=300
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set CONFIG_PHYSICAL_START=0x100000 CONFIG_RELOCATABLE=y CONFIG_PHYSICAL_ALIGN=0x100000 CONFIG_HOTPLUG_CPU=y
# CONFIG_COMPAT_VDSO is not set
# CONFIG_BOOTPARAM_NMI_WATCHDOG_BIT_0 is not set # CONFIG_BOOTPARAM_NMI_WATCHDOG_BIT_1 is not set # CONFIG_BOOTPARAM_NOAPIC is not set CONFIG_BOOTPARAM_NOLAPIC=y
# CONFIG_BOOTPARAM_LAPIC is not set
# CONFIG_BOOTPARAM_HPET_DISABLE is not set CONFIG_BOOTPARAM_IDLE_MWAIT=y CONFIG_BOOTPARAM_IDLE_POLL=y CONFIG_BOOTPARAM_HIGHMEM_512M=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management options (ACPI, APM)
#CONFIG_PM=yCONFIG_PM_LEGACY=y
# CONFIG_PM_DEBUG is not setCONFIG_PM_SLEEP_SMP=yCONFIG_PM_SLEEP=yCONFIG_SUSPEND_SMP_POSSIBLE=y
# CONFIG_SUSPEND is not setCONFIG_HIBERNATION_SMP_POSSIBLE=yCONFIG_HIBERNATION=yCONFIG_PM_STD_PARTITION=""
# CONFIG_ACPI is not setCONFIG_APM=y
# CONFIG_APM_IGNORE_USER_SUSPEND is not setCONFIG_APM_DO_ENABLE=yCONFIG_APM_CPU_IDLE=y
# CONFIG_APM_DISPLAY_BLANK is not set
# CONFIG_APM_ALLOW_INTS is not set
# CONFIG_APM_REAL_MODE_POWER_OFF is not set
#
# CPU Frequency scaling
#CONFIG_CPU_FREQ=yCONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
# CONFIG_CPU_FREQ_STAT is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=y
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set CONFIG_CPU_FREQ_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
#
# CPUFreq processor drivers
#
# CONFIG_X86_POWERNOW_K6 is not setCONFIG_X86_POWERNOW_K7=yCONFIG_X86_POWERNOW_K8=y
# CONFIG_X86_GX_SUSPMOD is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_SPEEDSTEP_ICH is not setCONFIG_X86_SPEEDSTEP_SMI=y
# CONFIG_X86_P4_CLOCKMOD is not set
# CONFIG_X86_CPUFREQ_NFORCE2 is not set
# CONFIG_X86_LONGRUN is not setCONFIG_X86_E_POWERSAVER=y
#
# shared options # CONFIG_X86_SPEEDSTEP_LIB=y # CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK is not set
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not setCONFIG_PCI_GOANY=yCONFIG_PCI_BIOS=yCONFIG_PCI_DIRECT=yCONFIG_PCI_DOMAINS=y
# CONFIG_PCIEPORTBUS is not setCONFIG_ARCH_SUPPORTS_MSI=yCONFIG_PCI_MSI=y
# CONFIG_PCI_DEBUG is not setCONFIG_HT_IRQ=yCONFIG_ISA_DMA_API=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
CONFIG_SCx200=y
# CONFIG_SCx200HR_TIMER is not set
#
# PCCARD (PCMCIA/CardBus) support
#
#
# Executable file formats
#CONFIG_BINFMT_ELF=yCONFIG_BINFMT_AOUT=y
# CONFIG_BINFMT_MISC is not set
#
# Networking
#CONFIG_NET=y
#
# Networking options
#CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not setCONFIG_UNIX=yCONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not setCONFIG_XFRM_MIGRATE=yCONFIG_NET_KEY=yCONFIG_NET_KEY_MIGRATE=yCONFIG_INET=yCONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not setCONFIG_IP_FIB_HASH=yCONFIG_IP_PNP=yCONFIG_IP_PNP_DHCP=y
# CONFIG_IP_PNP_BOOTP is not setCONFIG_IP_PNP_RARP=y
# CONFIG_NET_IPIP is not setCONFIG_NET_IPGRE=y
# CONFIG_NET_IPGRE_BROADCAST is not set
# CONFIG_IP_MROUTE is not setCONFIG_ARPD=y
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not setCONFIG_INET_ESP=y
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not setCONFIG_INET_XFRM_MODE_TRANSPORT=y
# CONFIG_INET_XFRM_MODE_TUNNEL is not setCONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not setCONFIG_TCP_CONG_ADVANCED=y
# CONFIG_TCP_CONG_BIC is not setCONFIG_TCP_CONG_CUBIC=y
# CONFIG_TCP_CONG_WESTWOOD is not setCONFIG_TCP_CONG_HTCP=yCONFIG_TCP_CONG_HSTCP=yCONFIG_TCP_CONG_HYBLA=yCONFIG_TCP_CONG_VEGAS=y
# CONFIG_TCP_CONG_SCALABLE is not set
# CONFIG_TCP_CONG_LP is not setCONFIG_TCP_CONG_VENO=yCONFIG_TCP_CONG_YEAH=yCONFIG_TCP_CONG_ILLINOIS=y
# CONFIG_DEFAULT_BIC is not set
# CONFIG_DEFAULT_CUBIC is not set
# CONFIG_DEFAULT_HTCP is not setCONFIG_DEFAULT_VEGAS=y
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not setCONFIG_DEFAULT_TCP_CONG="vegas"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not setCONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
#
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK is not set
# CONFIG_NF_CONNTRACK_ENABLED is not set
# CONFIG_NF_CONNTRACK is not setCONFIG_NETFILTER_XTABLES=yCONFIG_NETFILTER_XT_TARGET_CLASSIFY=y
# CONFIG_NETFILTER_XT_TARGET_MARK is not setCONFIG_NETFILTER_XT_TARGET_NFQUEUE=yCONFIG_NETFILTER_XT_TARGET_NFLOG=yCONFIG_NETFILTER_XT_TARGET_TCPMSS=yCONFIG_NETFILTER_XT_MATCH_COMMENT=y
# CONFIG_NETFILTER_XT_MATCH_DCCP is not setCONFIG_NETFILTER_XT_MATCH_DSCP=y
# CONFIG_NETFILTER_XT_MATCH_ESP is not setCONFIG_NETFILTER_XT_MATCH_LENGTH=yCONFIG_NETFILTER_XT_MATCH_LIMIT=yCONFIG_NETFILTER_XT_MATCH_MAC=y
# CONFIG_NETFILTER_XT_MATCH_MARK is not set
# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
# CONFIG_NETFILTER_XT_MATCH_QUOTA is not setCONFIG_NETFILTER_XT_MATCH_REALM=y
# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not setCONFIG_NETFILTER_XT_MATCH_STRING=yCONFIG_NETFILTER_XT_MATCH_TCPMSS=y
# CONFIG_NETFILTER_XT_MATCH_TIME is not setCONFIG_NETFILTER_XT_MATCH_U32=yCONFIG_NETFILTER_XT_MATCH_HASHLIMIT=y
#
# IP: Netfilter Configuration
#CONFIG_IP_NF_QUEUE=yCONFIG_IP_NF_IPTABLES=y
# CONFIG_IP_NF_MATCH_IPRANGE is not set
# CONFIG_IP_NF_MATCH_TOS is not set
# CONFIG_IP_NF_MATCH_RECENT is not set
# CONFIG_IP_NF_MATCH_ECN is not set
# CONFIG_IP_NF_MATCH_AH is not setCONFIG_IP_NF_MATCH_TTL=y
# CONFIG_IP_NF_MATCH_OWNER is not setCONFIG_IP_NF_MATCH_ADDRTYPE=yCONFIG_IP_NF_FILTER=yCONFIG_IP_NF_TARGET_REJECT=yCONFIG_IP_NF_TARGET_LOG=y
# CONFIG_IP_NF_TARGET_ULOG is not set
# CONFIG_IP_NF_MANGLE is not set
# CONFIG_IP_NF_RAW is not set
# CONFIG_IP_NF_ARPTABLES is not set
#
# DECnet: Netfilter Configuration
#CONFIG_DECNET_NF_GRABULATOR=yCONFIG_IP_DCCP=y
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP_CCID2 is not set
# CONFIG_IP_DCCP_CCID3 is not set
#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not setCONFIG_IP_SCTP=y
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not setCONFIG_SCTP_HMAC_MD5=y
# CONFIG_TIPC is not setCONFIG_ATM=y
# CONFIG_ATM_CLIP is not setCONFIG_ATM_LANE=yCONFIG_ATM_MPOA=y
# CONFIG_ATM_BR2684 is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not setCONFIG_DECNET=y
# CONFIG_DECNET_ROUTER is not setCONFIG_LLC=y
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not setCONFIG_X25=yCONFIG_LAPB=yCONFIG_ECONET=yCONFIG_ECONET_AUNUDP=y
# CONFIG_ECONET_NATIVE is not setCONFIG_WAN_ROUTER=y
#
# QoS and/or fair queueing
#CONFIG_NET_SCHED=yCONFIG_NET_SCH_FIFO=y
#
# Queueing/Scheduling
#
# CONFIG_NET_SCH_CBQ is not set
# CONFIG_NET_SCH_HTB is not setCONFIG_NET_SCH_HFSC=y
# CONFIG_NET_SCH_ATM is not setCONFIG_NET_SCH_PRIO=yCONFIG_NET_SCH_RR=yCONFIG_NET_SCH_RED=yCONFIG_NET_SCH_SFQ=y
# CONFIG_NET_SCH_TEQL is not setCONFIG_NET_SCH_TBF=yCONFIG_NET_SCH_GRED=y
# CONFIG_NET_SCH_DSMARK is not setCONFIG_NET_SCH_NETEM=y
# CONFIG_NET_SCH_INGRESS is not set
#
# Classification
#CONFIG_NET_CLS=yCONFIG_NET_CLS_BASIC=y
# CONFIG_NET_CLS_TCINDEX is not setCONFIG_NET_CLS_ROUTE4=yCONFIG_NET_CLS_ROUTE=y
# CONFIG_NET_CLS_FW is not set
# CONFIG_NET_CLS_U32 is not set
# CONFIG_NET_CLS_RSVP is not set
# CONFIG_NET_CLS_RSVP6 is not set
# CONFIG_NET_EMATCH is not setCONFIG_NET_CLS_ACT=yCONFIG_NET_ACT_POLICE=y
# CONFIG_NET_ACT_GACT is not setCONFIG_NET_ACT_MIRRED=y
# CONFIG_NET_ACT_IPT is not setCONFIG_NET_ACT_NAT=y
# CONFIG_NET_ACT_PEDIT is not set
# CONFIG_NET_ACT_SIMP is not set
# CONFIG_NET_CLS_POLICE is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not setCONFIG_IRDA=y
#
# IrDA protocols
#
# CONFIG_IRLAN is not setCONFIG_IRCOMM=y
# CONFIG_IRDA_ULTRA is not set
#
# IrDA options
#
# CONFIG_IRDA_CACHE_LAST_LSAP is not set
# CONFIG_IRDA_FAST_RR is not set
# CONFIG_IRDA_DEBUG is not set
#
# Infrared-port device drivers
#
#
# SIR device drivers
#
# CONFIG_IRTTY_SIR is not set
#
# Dongle support
#
# CONFIG_KINGSUN_DONGLE is not set
# CONFIG_KSDAZZLE_DONGLE is not setCONFIG_KS959_DONGLE=y
#
# Old SIR device drivers
#
#
# Old Serial dongle support
#
#
# FIR device drivers
#
# CONFIG_USB_IRDA is not set
# CONFIG_SIGMATEL_FIR is not set
# CONFIG_NSC_FIR is not setCONFIG_WINBOND_FIR=y
# CONFIG_TOSHIBA_FIR is not set
# CONFIG_SMC_IRCC_FIR is not setCONFIG_ALI_FIR=yCONFIG_VLSI_FIR=y
# CONFIG_VIA_FIR is not set
# CONFIG_MCS_FIR is not set
# CONFIG_BT is not setCONFIG_AF_RXRPC=y
# CONFIG_AF_RXRPC_DEBUG is not set
# CONFIG_RXKAD is not set
#
# Wireless
#
# CONFIG_CFG80211 is not setCONFIG_WIRELESS_EXT=y
# CONFIG_MAC80211 is not setCONFIG_IEEE80211=y
# CONFIG_IEEE80211_DEBUG is not set
# CONFIG_IEEE80211_CRYPT_WEP is not set
# CONFIG_IEEE80211_CRYPT_CCMP is not set
# CONFIG_IEEE80211_CRYPT_TKIP is not set
# CONFIG_IEEE80211_SOFTMAC is not setCONFIG_RFKILL=yCONFIG_RFKILL_INPUT=yCONFIG_RFKILL_LEDS=y
# CONFIG_NET_9P is not set
#
# Device Drivers
#
#
# Generic Driver Options
#CONFIG_STANDALONE=yCONFIG_PREVENT_FIRMWARE_BUILD=yCONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not setCONFIG_DEBUG_DEVRES=y
# CONFIG_SYS_HYPERVISOR is not setCONFIG_CONNECTOR=yCONFIG_PROC_EVENTS=y
# CONFIG_PARPORT is not setCONFIG_BLK_DEV=yCONFIG_BLK_DEV_FD=yCONFIG_BLK_CPQ_DA=y
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not setCONFIG_BLK_DEV_UMEM=y
# CONFIG_BLK_DEV_COW_COMMON is not setCONFIG_BLK_DEV_LOOP=yCONFIG_BLK_DEV_CRYPTOLOOP=yCONFIG_BLK_DEV_NBD=y
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not setCONFIG_ATA_OVER_ETH=yCONFIG_MISC_DEVICES=y
# CONFIG_IBM_ASM is not setCONFIG_PHANTOM=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
#
# SCSI device support
#CONFIG_RAID_ATTRS=yCONFIG_SCSI=yCONFIG_SCSI_DMA=yCONFIG_SCSI_TGT=y
# CONFIG_SCSI_NETLINK is not setCONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not setCONFIG_CHR_DEV_OSST=yCONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not setCONFIG_CHR_DEV_SG=yCONFIG_CHR_DEV_SCH=y
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs #
# CONFIG_SCSI_MULTI_LUN is not set CONFIG_SCSI_CONSTANTS=yCONFIG_SCSI_LOGGING=yCONFIG_SCSI_SCAN_ASYNC=y
#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not setCONFIG_SCSI_ISCSI_ATTRS=yCONFIG_SCSI_SAS_ATTRS=yCONFIG_SCSI_SAS_LIBSAS=yCONFIG_SCSI_SAS_ATA=yCONFIG_SCSI_SAS_LIBSAS_DEBUG=y
# CONFIG_SCSI_LOWLEVEL is not setCONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not setCONFIG_SATA_AHCI=y
# CONFIG_SATA_SVW is not setCONFIG_ATA_PIIX=yCONFIG_SATA_MV=y
# CONFIG_SATA_NV is not setCONFIG_PDC_ADMA=y
# CONFIG_SATA_QSTOR is not setCONFIG_SATA_PROMISE=y
# CONFIG_SATA_SX4 is not setCONFIG_SATA_SIL=yCONFIG_SATA_SIL24=yCONFIG_SATA_SIS=y
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not setCONFIG_SATA_VITESSE=yCONFIG_SATA_INIC162X=yCONFIG_PATA_ALI=yCONFIG_PATA_AMD=yCONFIG_PATA_ARTOP=yCONFIG_PATA_ATIIXP=yCONFIG_PATA_CMD640_PCI=y
# CONFIG_PATA_CMD64X is not setCONFIG_PATA_CS5520=yCONFIG_PATA_CS5530=yCONFIG_PATA_CS5535=y
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_ATA_GENERIC is not setCONFIG_PATA_HPT366=y
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not setCONFIG_PATA_IT821X=y
# CONFIG_PATA_IT8213 is not setCONFIG_PATA_JMICRON=y
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not setCONFIG_PATA_OLDPIIX=yCONFIG_PATA_NETCELL=y
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not setCONFIG_PATA_OPTIDMA=y
# CONFIG_PATA_PDC_OLD is not setCONFIG_PATA_RADISYS=y
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not setCONFIG_PATA_SERVERWORKS=y
# CONFIG_PATA_PDC2027X is not setCONFIG_PATA_SIL680=yCONFIG_PATA_SIS=y
# CONFIG_PATA_VIA is not setCONFIG_PATA_WINBOND=y
# CONFIG_PATA_PLATFORM is not setCONFIG_MD=yCONFIG_BLK_DEV_MD=y
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_RAID0 is not set
# CONFIG_MD_RAID1 is not set
# CONFIG_MD_RAID10 is not setCONFIG_MD_RAID456=y
# CONFIG_MD_RAID5_RESHAPE is not setCONFIG_MD_MULTIPATH=y
# CONFIG_MD_FAULTY is not set
# CONFIG_BLK_DEV_DM is not set
#
# Fusion MPT device support
#CONFIG_FUSION=y
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not setCONFIG_FUSION_SAS=yCONFIG_FUSION_MAX_SGE=128CONFIG_FUSION_CTL=yCONFIG_FUSION_LOGGING=y
#
# IEEE 1394 (FireWire) support
#CONFIG_FIREWIRE=y
# CONFIG_FIREWIRE_OHCI is not setCONFIG_FIREWIRE_SBP2=yCONFIG_IEEE1394=y
#
# Subsystem Options
#CONFIG_IEEE1394_VERBOSEDEBUG=y
#
# Controllers
#
#
# Texas Instruments PCILynx requires I2C
#
# CONFIG_IEEE1394_OHCI1394 is not set
#
# Protocols
#
# CONFIG_IEEE1394_SBP2 is not set
# CONFIG_IEEE1394_ETH1394_ROM_ENTRY is not set
# CONFIG_IEEE1394_ETH1394 is not set
# CONFIG_IEEE1394_RAWIO is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not setCONFIG_NETDEVICES=yCONFIG_NETDEVICES_MULTIQUEUE=yCONFIG_IFB=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not setCONFIG_TUN=yCONFIG_VETH=y
# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not setCONFIG_PHYLIB=y
#
# MII PHY device drivers
#CONFIG_MARVELL_PHY=yCONFIG_DAVICOM_PHY=y
# CONFIG_QSEMI_PHY is not setCONFIG_LXT_PHY=yCONFIG_CICADA_PHY=y
# CONFIG_VITESSE_PHY is not setCONFIG_SMSC_PHY=yCONFIG_BROADCOM_PHY=yCONFIG_ICPLUS_PHY=yCONFIG_FIXED_PHY=y
# CONFIG_FIXED_MII_10_FDX is not setCONFIG_FIXED_MII_100_FDX=yCONFIG_FIXED_MII_1000_FDX=yCONFIG_FIXED_MII_AMNT=1CONFIG_MDIO_BITBANG=yCONFIG_NET_ETHERNET=yCONFIG_MII=yCONFIG_HAPPYMEAL=y
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not setCONFIG_NET_VENDOR_3COM=y
# CONFIG_VORTEX is not set
# CONFIG_TYPHOON is not setCONFIG_NET_TULIP=yCONFIG_DE2104X=y
# CONFIG_TULIP is not set
# CONFIG_DE4X5 is not setCONFIG_WINBOND_840=yCONFIG_DM9102=yCONFIG_ULI526X=yCONFIG_HP100=y
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not setCONFIG_NET_PCI=yCONFIG_PCNET32=y
# CONFIG_PCNET32_NAPI is not set
# CONFIG_AMD8111_ETH is not setCONFIG_ADAPTEC_STARFIRE=yCONFIG_ADAPTEC_STARFIRE_NAPI=y
# CONFIG_B44 is not setCONFIG_FORCEDETH=yCONFIG_FORCEDETH_NAPI=yCONFIG_EEPRO100=yCONFIG_E100=yCONFIG_FEALNX=yCONFIG_NATSEMI=y
# CONFIG_NE2K_PCI is not setCONFIG_8139CP=yCONFIG_8139TOO=yCONFIG_8139TOO_PIO=yCONFIG_8139TOO_TUNE_TWISTER=yCONFIG_8139TOO_8129=yCONFIG_8139_OLD_RX_RESET=y
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not setCONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not setCONFIG_DL2K=yCONFIG_E1000=y
# CONFIG_E1000_NAPI is not set
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
# CONFIG_E1000E is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not setCONFIG_R8169=y
# CONFIG_R8169_NAPI is not setCONFIG_SIS190=y
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not setCONFIG_SK98LIN=y
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not setCONFIG_BNX2=yCONFIG_QLA3XXX=yCONFIG_ATL1=yCONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not setCONFIG_CHELSIO_T3=yCONFIG_IXGBE=y
# CONFIG_IXGB is not setCONFIG_S2IO=y
# CONFIG_S2IO_NAPI is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not setCONFIG_NIU=yCONFIG_MLX4_CORE=yCONFIG_MLX4_DEBUG=y
# CONFIG_TEHUTI is not setCONFIG_TR=yCONFIG_IBMOL=y
# CONFIG_IBMLS is not setCONFIG_3C359=y
# CONFIG_TMS380TR is not set
#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
#
# USB Network Adapters
#CONFIG_USB_CATC=y
# CONFIG_USB_KAWETH is not setCONFIG_USB_PEGASUS=yCONFIG_USB_RTL8150=y
# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not setCONFIG_WAN=y
# CONFIG_LANMEDIA is not set
# CONFIG_HDLC is not set
# CONFIG_DLCI is not set
# CONFIG_WAN_ROUTER_DRIVERS is not set
# CONFIG_LAPBETHER is not setCONFIG_X25_ASY=y
# CONFIG_SBNI is not setCONFIG_ATM_DRIVERS=yCONFIG_ATM_DUMMY=y
# CONFIG_ATM_TCP is not set
# CONFIG_ATM_LANAI is not setCONFIG_ATM_ENI=yCONFIG_ATM_ENI_DEBUG=yCONFIG_ATM_ENI_TUNE_BURST=y
# CONFIG_ATM_ENI_BURST_TX_16W is not setCONFIG_ATM_ENI_BURST_TX_8W=y
# CONFIG_ATM_ENI_BURST_TX_4W is not set
# CONFIG_ATM_ENI_BURST_TX_2W is not setCONFIG_ATM_ENI_BURST_RX_16W=yCONFIG_ATM_ENI_BURST_RX_8W=yCONFIG_ATM_ENI_BURST_RX_4W=y
# CONFIG_ATM_ENI_BURST_RX_2W is not set
# CONFIG_ATM_FIRESTREAM is not set
# CONFIG_ATM_ZATM is not setCONFIG_ATM_NICSTAR=yCONFIG_ATM_NICSTAR_USE_SUNI=y
# CONFIG_ATM_NICSTAR_USE_IDT77105 is not setCONFIG_ATM_IDT77252=yCONFIG_ATM_IDT77252_DEBUG=yCONFIG_ATM_IDT77252_RCV_ALL=yCONFIG_ATM_IDT77252_USE_SUNI=y
# CONFIG_ATM_AMBASSADOR is not setCONFIG_ATM_HORIZON=y
# CONFIG_ATM_HORIZON_DEBUG is not setCONFIG_ATM_IA=y
# CONFIG_ATM_IA_DEBUG is not setCONFIG_ATM_FORE200E_MAYBE=yCONFIG_ATM_FORE200E_PCA=yCONFIG_ATM_FORE200E_PCA_DEFAULT_FW=y
# CONFIG_ATM_FORE200E_USE_TASKLET is not setCONFIG_ATM_FORE200E_TX_RETRY=16CONFIG_ATM_FORE200E_DEBUG=0CONFIG_ATM_FORE200E=y
# CONFIG_ATM_HE is not setCONFIG_FDDI=y
# CONFIG_DEFXX is not setCONFIG_SKFP=y
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not setCONFIG_SHAPER=yCONFIG_NETCONSOLE=yCONFIG_NETCONSOLE_DYNAMIC=yCONFIG_NETPOLL=yCONFIG_NETPOLL_TRAP=yCONFIG_NET_POLL_CONTROLLER=yCONFIG_ISDN=y
# CONFIG_ISDN_I4L is not setCONFIG_ISDN_CAPI=y
# CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON is not set
# CONFIG_CAPI_TRACE is not set
# CONFIG_ISDN_CAPI_MIDDLEWARE is not set
# CONFIG_ISDN_CAPI_CAPI20 is not set
#
# CAPI hardware drivers
#
# CONFIG_CAPI_AVM is not setCONFIG_CAPI_EICON=y
# CONFIG_ISDN_DIVAS is not set
# CONFIG_PHONE is not set
#
# Input device support
#CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not setCONFIG_INPUT_POLLDEV=y
#
# Userland interfaces
#CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not setCONFIG_INPUT_MOUSEDEV_SCREEN_X=1024CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768CONFIG_INPUT_JOYDEV=y
# CONFIG_INPUT_TSDEV is not setCONFIG_INPUT_EVDEV=yCONFIG_INPUT_EVBUG=y
#
# Input Device Drivers
#CONFIG_INPUT_KEYBOARD=yCONFIG_KEYBOARD_ATKBD=yCONFIG_KEYBOARD_SUNKBD=y
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not setCONFIG_KEYBOARD_STOWAWAY=y
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not setCONFIG_INPUT_TABLET=yCONFIG_TABLET_USB_ACECAD=y
# CONFIG_TABLET_USB_AIPTEK is not setCONFIG_TABLET_USB_GTCO=y
# CONFIG_TABLET_USB_KBTAB is not setCONFIG_TABLET_USB_WACOM=y
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#CONFIG_SERIO=yCONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not setCONFIG_SERIO_CT82C710=y
# CONFIG_SERIO_PCIPS2 is not setCONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not setCONFIG_GAMEPORT=y
# CONFIG_GAMEPORT_NS558 is not set
# CONFIG_GAMEPORT_L4 is not set
# CONFIG_GAMEPORT_EMU10K1 is not set
# CONFIG_GAMEPORT_FM801 is not set
#
# Character devices
#CONFIG_VT=yCONFIG_VT_CONSOLE=yCONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#CONFIG_SERIAL_8250=yCONFIG_SERIAL_8250_CONSOLE=yCONFIG_FIX_EARLYCON_MEM=yCONFIG_SERIAL_8250_PCI=yCONFIG_SERIAL_8250_NR_UARTS=4CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#CONFIG_SERIAL_CORE=yCONFIG_SERIAL_CORE_CONSOLE=yCONFIG_SERIAL_JSM=yCONFIG_UNIX98_PTYS=yCONFIG_LEGACY_PTYS=yCONFIG_LEGACY_PTY_COUNT=256CONFIG_IPMI_HANDLER=y
# CONFIG_IPMI_PANIC_EVENT is not set
# CONFIG_IPMI_DEVICE_INTERFACE is not setCONFIG_IPMI_SI=yCONFIG_IPMI_WATCHDOG=yCONFIG_IPMI_POWEROFF=y
# CONFIG_WATCHDOG is not setCONFIG_HW_RANDOM=yCONFIG_HW_RANDOM_INTEL=y
# CONFIG_HW_RANDOM_AMD is not setCONFIG_HW_RANDOM_GEODE=y
# CONFIG_HW_RANDOM_VIA is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not setCONFIG_SONYPI=yCONFIG_AGP=y
# CONFIG_AGP_ALI is not setCONFIG_AGP_ATI=y
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
# CONFIG_AGP_INTEL is not setCONFIG_AGP_NVIDIA=yCONFIG_AGP_SIS=yCONFIG_AGP_SWORKS=y
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
# CONFIG_DRM is not setCONFIG_MWAVE=y
# CONFIG_SCx200_GPIO is not set
CONFIG_PC8736x_GPIO=yCONFIG_NSC_GPIO=y
# CONFIG_CS5535_GPIO is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not setCONFIG_DEVPORT=y
# CONFIG_I2C is not set
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not setCONFIG_HWMON=yCONFIG_HWMON_VID=yCONFIG_SENSORS_ABITUGURU=yCONFIG_SENSORS_ABITUGURU3=y
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_F71805F is not setCONFIG_SENSORS_F71882FG=yCONFIG_SENSORS_CORETEMP=yCONFIG_SENSORS_IBMPEX=y
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not setCONFIG_SENSORS_SMSC47B397=yCONFIG_SENSORS_VIA686A=yCONFIG_SENSORS_VT1211=yCONFIG_SENSORS_VT8231=y
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_HDAPS is not setCONFIG_SENSORS_APPLESMC=yCONFIG_HWMON_DEBUG_CHIP=y
#
# Sonics Silicon Backplane
#CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#CONFIG_MFD_SM501=y
#
# Multimedia devices
#CONFIG_VIDEO_DEV=yCONFIG_VIDEO_V4L1=yCONFIG_VIDEO_V4L1_COMPAT=yCONFIG_VIDEO_V4L2=y
# CONFIG_VIDEO_CAPTURE_DRIVERS is not set
# CONFIG_RADIO_ADAPTERS is not setCONFIG_DVB_CORE=y
# CONFIG_DVB_CAPTURE_DRIVERS is not setCONFIG_DAB=y
# CONFIG_USB_DABUSB is not set
#
# Graphics support
#
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
# CONFIG_VGASTATE is not setCONFIG_VIDEO_OUTPUT_CONTROL=y
# CONFIG_FB is not set
#
# Console display driver support
#CONFIG_VGA_CONSOLE=yCONFIG_VGACON_SOFT_SCROLLBACK=yCONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
# CONFIG_VIDEO_SELECT is not setCONFIG_DUMMY_CONSOLE=y
#
# Sound
#CONFIG_SOUND=y
#
# Advanced Linux Sound Architecture
#
# CONFIG_SND is not set
#
# Open Sound System
#CONFIG_SOUND_PRIME=y
# CONFIG_SOUND_TRIDENT is not setCONFIG_HID_SUPPORT=yCONFIG_HID=y
# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
#
# USB Input Devices
#CONFIG_USB_HID=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not setCONFIG_USB_HIDDEV=yCONFIG_USB_MOUSE=yCONFIG_USB_SUPPORT=yCONFIG_USB_ARCH_HAS_HCD=yCONFIG_USB_ARCH_HAS_OHCI=yCONFIG_USB_ARCH_HAS_EHCI=yCONFIG_USB=yCONFIG_USB_DEBUG=y
#
# Miscellaneous USB options
#
# CONFIG_USB_DEVICEFS is not set
# CONFIG_USB_DEVICE_CLASS is not setCONFIG_USB_DYNAMIC_MINORS=yCONFIG_USB_SUSPEND=y
# CONFIG_USB_PERSIST is not set
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#CONFIG_USB_EHCI_HCD=yCONFIG_USB_EHCI_SPLIT_ISO=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_ISP116X_HCD is not setCONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not setCONFIG_USB_OHCI_LITTLE_ENDIAN=yCONFIG_USB_UHCI_HCD=y
# CONFIG_USB_U132_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not setCONFIG_USB_PRINTER=y
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' #
#
# may also be needed; see USB_STORAGE Help for more information # # CONFIG_USB_STORAGE is not set CONFIG_USB_LIBUSUAL=y
#
# USB Imaging devices
#CONFIG_USB_MDC800=yCONFIG_USB_MICROTEK=y
# CONFIG_USB_MON is not set
#
# USB port drivers
#
#
# USB Serial Converter support
#CONFIG_USB_SERIAL=y
# CONFIG_USB_SERIAL_CONSOLE is not set
# CONFIG_USB_SERIAL_GENERIC is not set
# CONFIG_USB_SERIAL_AIRCABLE is not setCONFIG_USB_SERIAL_AIRPRIME=yCONFIG_USB_SERIAL_ARK3116=yCONFIG_USB_SERIAL_BELKIN=yCONFIG_USB_SERIAL_CH341=yCONFIG_USB_SERIAL_WHITEHEAT=yCONFIG_USB_SERIAL_DIGI_ACCELEPORT=y
# CONFIG_USB_SERIAL_CP2101 is not setCONFIG_USB_SERIAL_CYPRESS_M8=yCONFIG_USB_SERIAL_EMPEG=y
# CONFIG_USB_SERIAL_FTDI_SIO is not set
# CONFIG_USB_SERIAL_FUNSOFT is not setCONFIG_USB_SERIAL_VISOR=yCONFIG_USB_SERIAL_IPAQ=y
# CONFIG_USB_SERIAL_IR is not setCONFIG_USB_SERIAL_EDGEPORT=yCONFIG_USB_SERIAL_EDGEPORT_TI=yCONFIG_USB_SERIAL_GARMIN=y
# CONFIG_USB_SERIAL_IPW is not setCONFIG_USB_SERIAL_KEYSPAN_PDA=y
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not setCONFIG_USB_SERIAL_KOBIL_SCT=yCONFIG_USB_SERIAL_MCT_U232=yCONFIG_USB_SERIAL_MOS7720=yCONFIG_USB_SERIAL_MOS7840=yCONFIG_USB_SERIAL_NAVMAN=y
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_OTI6858 is not set
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not setCONFIG_USB_SERIAL_SIERRAWIRELESS=yCONFIG_USB_SERIAL_TI=yCONFIG_USB_SERIAL_CYBERJACK=y
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OPTION is not setCONFIG_USB_SERIAL_OMNINET=yCONFIG_USB_SERIAL_DEBUG=yCONFIG_USB_EZUSB=y
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not setCONFIG_USB_EMI26=y
# CONFIG_USB_ADUTUX is not setCONFIG_USB_AUERSWALD=yCONFIG_USB_RIO500=y
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not setCONFIG_USB_BERRY_CHARGE=y
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not setCONFIG_USB_IDMOUSE=yCONFIG_USB_FTDI_ELAN=y
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
#
# USB DSL modem support
#CONFIG_USB_ATM=yCONFIG_USB_SPEEDTOUCH=y
# CONFIG_USB_CXACRU is not setCONFIG_USB_UEAGLEATM=yCONFIG_USB_XUSBATM=y
#
# USB Gadget Support
#CONFIG_USB_GADGET=yCONFIG_USB_GADGET_DEBUG=y
# CONFIG_USB_GADGET_DEBUG_FILES is not setCONFIG_USB_GADGET_DEBUG_FS=yCONFIG_USB_GADGET_SELECTED=y
# CONFIG_USB_GADGET_AMD5536UDC is not set
# CONFIG_USB_GADGET_ATMEL_USBA is not set
# CONFIG_USB_GADGET_FSL_USB2 is not setCONFIG_USB_GADGET_NET2280=yCONFIG_USB_NET2280=y
# CONFIG_USB_GADGET_PXA2XX is not set
# CONFIG_USB_GADGET_M66592 is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
# CONFIG_USB_GADGET_S3C2410 is not set
# CONFIG_USB_GADGET_AT91 is not set
# CONFIG_USB_GADGET_DUMMY_HCD is not setCONFIG_USB_GADGET_DUALSPEED=y
# CONFIG_USB_ZERO is not setCONFIG_USB_ETH=yCONFIG_USB_ETH_RNDIS=y
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FILE_STORAGE is not set
# CONFIG_USB_G_SERIAL is not set
# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_MMC is not setCONFIG_NEW_LEDS=yCONFIG_LEDS_CLASS=y
#
# LED drivers
#
#
# LED Triggers
#CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not setCONFIG_LEDS_TRIGGER_HEARTBEAT=yCONFIG_INFINIBAND=yCONFIG_INFINIBAND_USER_MAD=y
# CONFIG_INFINIBAND_USER_ACCESS is not setCONFIG_INFINIBAND_ADDR_TRANS=y
# CONFIG_INFINIBAND_MTHCA is not setCONFIG_INFINIBAND_AMSO1100=y
# CONFIG_INFINIBAND_AMSO1100_DEBUG is not set
# CONFIG_INFINIBAND_CXGB3 is not setCONFIG_MLX4_INFINIBAND=yCONFIG_INFINIBAND_IPOIB=y
# CONFIG_INFINIBAND_IPOIB_CM is not set
# CONFIG_INFINIBAND_IPOIB_DEBUG is not setCONFIG_INFINIBAND_SRP=yCONFIG_INFINIBAND_ISER=yCONFIG_EDAC=y
#
# Reporting subsystems
#CONFIG_EDAC_DEBUG=y
# CONFIG_EDAC_MM_EDAC is not set
# CONFIG_RTC_CLASS is not set
#
# DMA Engine support
#CONFIG_DMA_ENGINE=y
#
# DMA Clients
#CONFIG_NET_DMA=y
#
# DMA Devices
#CONFIG_INTEL_IOATDMA=y
# CONFIG_VIRTUALIZATION is not set
#
# Userspace I/O
#
# CONFIG_UIO is not set
#
# File systems
#CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not setCONFIG_EXT2_FS_XIP=yCONFIG_FS_XIP=yCONFIG_EXT3_FS=yCONFIG_EXT3_FS_XATTR=yCONFIG_EXT3_FS_POSIX_ACL=yCONFIG_EXT3_FS_SECURITY=yCONFIG_EXT4DEV_FS=y
# CONFIG_EXT4DEV_FS_XATTR is not setCONFIG_JBD=yCONFIG_JBD_DEBUG=yCONFIG_JBD2=yCONFIG_JBD2_DEBUG=yCONFIG_FS_MBCACHE=yCONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not setCONFIG_REISERFS_PROC_INFO=yCONFIG_REISERFS_FS_XATTR=y
# CONFIG_REISERFS_FS_POSIX_ACL is not set
# CONFIG_REISERFS_FS_SECURITY is not set
# CONFIG_JFS_FS is not setCONFIG_FS_POSIX_ACL=yCONFIG_XFS_FS=yCONFIG_XFS_QUOTA=yCONFIG_XFS_SECURITY=y
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not setCONFIG_GFS2_FS=y
# CONFIG_GFS2_FS_LOCKING_NOLOCK is not setCONFIG_GFS2_FS_LOCKING_DLM=y
# CONFIG_OCFS2_FS is not setCONFIG_MINIX_FS=yCONFIG_ROMFS_FS=y
# CONFIG_INOTIFY is not set
# CONFIG_QUOTA is not setCONFIG_QUOTACTL=yCONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not setCONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not setCONFIG_UDF_FS=yCONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#CONFIG_FAT_FS=y
# CONFIG_MSDOS_FS is not setCONFIG_VFAT_FS=yCONFIG_FAT_DEFAULT_CODEPAGE=437CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#CONFIG_PROC_FS=yCONFIG_PROC_KCORE=yCONFIG_PROC_SYSCTL=yCONFIG_SYSFS=y
# CONFIG_TMPFS is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not setCONFIG_RAMFS=yCONFIG_CONFIGFS_FS=y
#
# Miscellaneous filesystems
#CONFIG_ADFS_FS=yCONFIG_ADFS_FS_RW=yCONFIG_AFFS_FS=y
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not setCONFIG_HFSPLUS_FS=y
# CONFIG_BEFS_FS is not setCONFIG_BFS_FS=yCONFIG_EFS_FS=y
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not setCONFIG_QNX4FS_FS=yCONFIG_SYSV_FS=yCONFIG_UFS_FS=yCONFIG_UFS_FS_WRITE=y
# CONFIG_UFS_DEBUG is not set
#
# Network File Systems
#
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not setCONFIG_SMB_FS=yCONFIG_SMB_NLS_DEFAULT=yCONFIG_SMB_NLS_REMOTE="cp437"CONFIG_CIFS=y
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not setCONFIG_CIFS_XATTR=yCONFIG_CIFS_POSIX=yCONFIG_CIFS_DEBUG2=y
# CONFIG_CIFS_EXPERIMENTAL is not setCONFIG_NCP_FS=y
# CONFIG_NCPFS_PACKET_SIGNING is not setCONFIG_NCPFS_IOCTL_LOCKING=yCONFIG_NCPFS_STRONG=y
# CONFIG_NCPFS_NFS_NS is not set
# CONFIG_NCPFS_OS2_NS is not set
# CONFIG_NCPFS_SMALLDOS is not set
# CONFIG_NCPFS_NLS is not setCONFIG_NCPFS_EXTRAS=y
# CONFIG_CODA_FS is not setCONFIG_AFS_FS=yCONFIG_AFS_DEBUG=y
#
# Partition Types
#CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not setCONFIG_ATARI_PARTITION=y
# CONFIG_MAC_PARTITION is not setCONFIG_MSDOS_PARTITION=yCONFIG_BSD_DISKLABEL=yCONFIG_MINIX_SUBPARTITION=yCONFIG_SOLARIS_X86_PARTITION=y
# CONFIG_UNIXWARE_DISKLABEL is not setCONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not setCONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not setCONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
#
# Native Language Support
#CONFIG_NLS=yCONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not setCONFIG_NLS_CODEPAGE_737=y
# CONFIG_NLS_CODEPAGE_775 is not setCONFIG_NLS_CODEPAGE_850=yCONFIG_NLS_CODEPAGE_852=yCONFIG_NLS_CODEPAGE_855=y
# CONFIG_NLS_CODEPAGE_857 is not setCONFIG_NLS_CODEPAGE_860=y
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not setCONFIG_NLS_CODEPAGE_863=y
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not setCONFIG_NLS_CODEPAGE_866=yCONFIG_NLS_CODEPAGE_869=yCONFIG_NLS_CODEPAGE_936=y
# CONFIG_NLS_CODEPAGE_950 is not setCONFIG_NLS_CODEPAGE_932=yCONFIG_NLS_CODEPAGE_949=y
# CONFIG_NLS_CODEPAGE_874 is not setCONFIG_NLS_ISO8859_8=yCONFIG_NLS_CODEPAGE_1250=yCONFIG_NLS_CODEPAGE_1251=y
# CONFIG_NLS_ASCII is not setCONFIG_NLS_ISO8859_1=yCONFIG_NLS_ISO8859_2=yCONFIG_NLS_ISO8859_3=yCONFIG_NLS_ISO8859_4=yCONFIG_NLS_ISO8859_5=y
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not setCONFIG_NLS_ISO8859_13=yCONFIG_NLS_ISO8859_14=y
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not setCONFIG_NLS_KOI8_U=yCONFIG_NLS_UTF8=y
#
# Distributed Lock Manager
#CONFIG_DLM=y
# CONFIG_DLM_DEBUG is not setCONFIG_INSTRUMENTATION=y
# CONFIG_PROFILING is not set
#
# Kernel hacking
#CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not setCONFIG_ENABLE_MUST_CHECK=yCONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not setCONFIG_DEBUG_FS=yCONFIG_HEADERS_CHECK=yCONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not setCONFIG_DETECT_SOFTLOCKUP=yCONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not setCONFIG_TIMER_STATS=yCONFIG_DEBUG_PREEMPT=yCONFIG_DEBUG_RT_MUTEXES=yCONFIG_DEBUG_PI_LIST=y
# CONFIG_RT_MUTEX_TESTER is not setCONFIG_DEBUG_SPINLOCK=yCONFIG_DEBUG_MUTEXES=yCONFIG_DEBUG_LOCK_ALLOC=y
# CONFIG_PROVE_LOCKING is not setCONFIG_LOCKDEP=yCONFIG_LOCK_STAT=y
# CONFIG_DEBUG_LOCKDEP is not setCONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not setCONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_HIGHMEM is not set
# CONFIG_DEBUG_VM is not setCONFIG_DEBUG_LIST=yCONFIG_FRAME_POINTER=y
# CONFIG_FORCED_INLINING is not set
# CONFIG_FAULT_INJECTION is not setCONFIG_EARLY_PRINTK=yCONFIG_DEBUG_STACKOVERFLOW=yCONFIG_DEBUG_STACK_USAGE=y
#
# Page alloc debug is incompatible with Software Suspend on i386 #
# CONFIG_DEBUG_RODATA is not set
# CONFIG_4KSTACKS is not set CONFIG_X86_FIND_SMP_CONFIG=yCONFIG_X86_MPPARSE=yCONFIG_DOUBLEFAULT=y
#
# Security options
#CONFIG_KEYS=yCONFIG_KEYS_DEBUG_PROC_KEYS=y
# CONFIG_SECURITY is not setCONFIG_XOR_BLOCKS=yCONFIG_ASYNC_CORE=yCONFIG_ASYNC_MEMCPY=yCONFIG_ASYNC_XOR=yCONFIG_CRYPTO=yCONFIG_CRYPTO_ALGAPI=yCONFIG_CRYPTO_ABLKCIPHER=yCONFIG_CRYPTO_BLKCIPHER=yCONFIG_CRYPTO_HASH=yCONFIG_CRYPTO_MANAGER=yCONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not setCONFIG_CRYPTO_NULL=yCONFIG_CRYPTO_MD4=yCONFIG_CRYPTO_MD5=yCONFIG_CRYPTO_SHA1=yCONFIG_CRYPTO_SHA256=yCONFIG_CRYPTO_SHA512=y
# CONFIG_CRYPTO_WP512 is not setCONFIG_CRYPTO_TGR192=yCONFIG_CRYPTO_GF128MUL=y
# CONFIG_CRYPTO_ECB is not setCONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_LRW is not setCONFIG_CRYPTO_XTS=yCONFIG_CRYPTO_CRYPTD=yCONFIG_CRYPTO_DES=yCONFIG_CRYPTO_FCRYPT=yCONFIG_CRYPTO_BLOWFISH=yCONFIG_CRYPTO_TWOFISH=yCONFIG_CRYPTO_TWOFISH_COMMON=y
# CONFIG_CRYPTO_TWOFISH_586 is not set
# CONFIG_CRYPTO_SERPENT is not setCONFIG_CRYPTO_AES=yCONFIG_CRYPTO_AES_586=y
# CONFIG_CRYPTO_CAST5 is not setCONFIG_CRYPTO_CAST6=yCONFIG_CRYPTO_TEA=y
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not setCONFIG_CRYPTO_ANUBIS=yCONFIG_CRYPTO_SEED=y
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not setCONFIG_CRYPTO_CAMELLIA=y
# CONFIG_CRYPTO_AUTHENC is not setCONFIG_CRYPTO_HW=yCONFIG_CRYPTO_DEV_PADLOCK=yCONFIG_CRYPTO_DEV_PADLOCK_AES=yCONFIG_CRYPTO_DEV_PADLOCK_SHA=yCONFIG_CRYPTO_DEV_GEODE=y
#
# Library routines
#CONFIG_BITREVERSE=yCONFIG_CRC_CCITT=yCONFIG_CRC16=yCONFIG_CRC_ITU_T=yCONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not setCONFIG_AUDIT_GENERIC=yCONFIG_ZLIB_INFLATE=yCONFIG_TEXTSEARCH=yCONFIG_TEXTSEARCH_KMP=yCONFIG_TEXTSEARCH_BM=yCONFIG_TEXTSEARCH_FSM=yCONFIG_PLIST=yCONFIG_HAS_IOMEM=yCONFIG_HAS_IOPORT=yCONFIG_HAS_DMA=yCONFIG_GENERIC_HARDIRQS=yCONFIG_GENERIC_IRQ_PROBE=yCONFIG_GENERIC_PENDING_IRQ=yCONFIG_X86_SMP=yCONFIG_X86_HT=yCONFIG_X86_BIOS_REBOOT=yCONFIG_X86_TRAMPOLINE=yCONFIG_KTIME_SCALAR=y
Linux version 2.6.23 (mingo@dione) (gcc version 4.2.2) #28 SMP PREEMPT Mon Oct 15 13:15:07 CEST 2007 BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
console [earlyser0] enabled
using polling idle threads.
using polling idle threads.
0MB HIGHMEM available.
1023MB LOWMEM available.
found SMP MP-table at 000f5680
Entering add_active_range(0, 0, 262128) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 262128
HighMem 262128 -> 262128
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 262128
On node 0 totalpages: 262128
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 2015 pages used for memmap
Normal zone: 256017 pages, LIFO batch:31
HighMem zone: 0 pages used for memmap
Movable zone: 0 pages used for memmap
DMI 2.3 present.
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
Processor #0 15:3 APIC version 17
Processor #1 15:3 APIC version 17
I/O APIC #2 Version 17 at 0xFEC00000.
Enabling APIC mode: Physflat. Using 1 I/O APICs
Processors: 2
Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
Built 1 zonelists in Zone order. Total pages: 260081
Kernel command line: root=/dev/sda1 console=tty 3 debug profile=0 initcall_debug selinux=0 enforcing=0 apic=verbose ignore_loglevel sysrq_always_enabled earlyprintk=serial,ttyS0,115200,keep idle=poll nmi_watchdog=2 nolapic idle=mwait idle=poll kernel profiling enabled (shift: 0)
debug: ignoring loglevel setting.
debug: sysrq always enabled.
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 2160.210 MHz processor.
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1007548k/1048512k available (5448k kernel code, 40460k reserved, 2157k data, 400k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xffe1a000 - 0xfffff000 (1940 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xc0800000 - 0xff7fe000 (1007 MB)
lowmem : 0x80000000 - 0xbfff0000 (1023 MB)
.init : 0x80876000 - 0x808da000 ( 400 kB)
.data : 0x8065216a - 0x8086d7e8 (2157 kB)
.text : 0x80100000 - 0x8065216a (5448 kB)Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 4323.16 BogoMIPS (lpj=7203456)
Security Framework v1.0.0 initialized
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 178bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000003 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 0(2) -> Core 0
CPU: After all inits, caps: 178bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000003 00000000 Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
Freeing SMP alternatives: 21k freed
CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
enabled ExtINT on CPU#0
Leaving ESR disabled.
Booting processor 1/1 eip 2000
Initializing CPU#1
masked ExtINT on CPU#1
Leaving ESR disabled.
Calibrating delay using timer specific routine.. 4321.15 BogoMIPS (lpj=7200245)
CPU: After generic identify, caps: 178bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000003 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 1(2) -> Core 1
CPU: After all inits, caps: 178bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000003 00000000
CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
Total of 2 processors activated (8645.31 BogoMIPS).
ExtINT not setup in hardware but reported by MP table
ENABLING IO-APIC IRQs
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected.
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
..MP-BIOS bug: 8254 timer not connected to IO-APIC
...trying to set up timer (IRQ0) through the 8259A ...
..... (found pin 0) ...works.
number of MP IRQ sources: 17.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 00000000
....... : physical APIC id: 00 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 00170011 ....... : max redirection entries: 0017 ....... : PRQ implemented: 0 ....... : IO APIC version: 0011
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 0 0 0 0 0 0 0 31 01 000 00 0 0 0 0 0 0 0 39 02 000 00 1 0 0 0 0 0 0 00 03 000 00 1 1 0 1 0 0 0 41 04 000 00 0 0 0 0 0 0 0 49 05 000 00 1 1 0 1 0 0 0 51 06 000 00 0 0 0 0 0 0 0 59 07 000 00 1 0 0 0 0 0 0 61 08 000 00 0 0 0 0 0 0 0 69 09 000 00 0 0 0 0 0 0 0 71 0a 000 00 0 0 0 0 0 0 0 79 0b 000 00 1 1 0 1 0 0 0 81 0c 000 00 0 0 0 0 0 0 0 89 0d 000 00 0 0 0 0 0 0 0 91 0e 000 00 0 0 0 0 0 0 0 99 0f 000 00 0 0 0 0 0 0 0 A1 10 000 00 1 0 0 0 0 0 0 00 11 000 00 1 0 0 0 0 0 0 00 12 000 00 1 0 0 0 0 0 0 00 13 000 00 1 0 0 0 0 0 0 00 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 0:0
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
... lapic delta = 1350029
... PM timer delta = 0
..... delta 1350029
..... mult: 57987084
..... calibration result: 720015
..... CPU clock speed is 2160.0876 MHz.
..... host bus clock speed is 216.0087 MHz.
... verify APIC timer
... jiffies delta = 30
... jiffies result ok
Brought up 2 CPUs
Calling initcall 0x808b77c3: net_ns_init+0x0/0x100()net_namespace: 64 bytes
initcall 0x808b77c3: net_ns_init+0x0/0x100() returned 0.
initcall 0x808b77c3 ran for 3 msecs: net_ns_init+0x0/0x100()
Calling initcall 0x8088024b: reboot_init+0x0/0xd()
initcall 0x8088024b: reboot_init+0x0/0xd() returned 0.
initcall 0x8088024b ran for 0 msecs: reboot_init+0x0/0xd()
Calling initcall 0x8088648c: sysctl_init+0x0/0xf()
initcall 0x8088648c: sysctl_init+0x0/0xf() returned 0.
initcall 0x8088648c ran for 0 msecs: sysctl_init+0x0/0xf()
Calling initcall 0x80886e53: init_jiffies_clocksource+0x0/0xa()
initcall 0x80886e53: init_jiffies_clocksource+0x0/0xa() returned 0.
initcall 0x80886e53 ran for 0 msecs: init_jiffies_clocksource+0x0/0xa()
Calling initcall 0x808871af: ksysfs_init+0x0/0x46()
initcall 0x808871af: ksysfs_init+0x0/0x46() returned 0.
initcall 0x808871af ran for 0 msecs: ksysfs_init+0x0/0x46()
Calling initcall 0x80888f80: filelock_init+0x0/0x2d()
initcall 0x80888f80: filelock_init+0x0/0x2d() returned 0.
initcall 0x80888f80 ran for 0 msecs: filelock_init+0x0/0x2d()
Calling initcall 0x80889816: init_script_binfmt+0x0/0xa()
initcall 0x80889816: init_script_binfmt+0x0/0xa() returned 0.
initcall 0x80889816 ran for 0 msecs: init_script_binfmt+0x0/0xa()
Calling initcall 0x80889820: init_elf_binfmt+0x0/0xa()
initcall 0x80889820: init_elf_binfmt+0x0/0xa() returned 0.
initcall 0x80889820 ran for 0 msecs: init_elf_binfmt+0x0/0xa()
Calling initcall 0x8088b0ba: debugfs_init+0x0/0x39()
initcall 0x8088b0ba: debugfs_init+0x0/0x39() returned 0.
initcall 0x8088b0ba ran for 0 msecs: debugfs_init+0x0/0x39()
Calling initcall 0x8088b97e: securityfs_init+0x0/0x39()
initcall 0x8088b97e: securityfs_init+0x0/0x39() returned 0.
initcall 0x8088b97e ran for 0 msecs: securityfs_init+0x0/0x39()
Calling initcall 0x8088c1e0: random32_init+0x0/0x44()
initcall 0x8088c1e0: random32_init+0x0/0x44() returned 0.
initcall 0x8088c1e0 ran for 0 msecs: random32_init+0x0/0x44()
Calling initcall 0x808b76aa: sock_init+0x0/0x50()
initcall 0x808b76aa: sock_init+0x0/0x50() returned 0.
initcall 0x808b76aa ran for 0 msecs: sock_init+0x0/0x50()
Calling initcall 0x808b8111: netpoll_init+0x0/0x35()
initcall 0x808b8111: netpoll_init+0x0/0x35() returned 0.
initcall 0x808b8111 ran for 0 msecs: netpoll_init+0x0/0x35()
Calling initcall 0x808b82b0: netlink_proto_init+0x0/0x10e()
NET: Registered protocol family 16
initcall 0x808b82b0: netlink_proto_init+0x0/0x10e() returned 0.
initcall 0x808b82b0 ran for 3 msecs: netlink_proto_init+0x0/0x10e()
Calling initcall 0x8088c2b9: pcibus_class_init+0x0/0xa()
initcall 0x8088c2b9: pcibus_class_init+0x0/0xa() returned 0.
initcall 0x8088c2b9 ran for 0 msecs: pcibus_class_init+0x0/0xa()
Calling initcall 0x8088d36c: pci_driver_init+0x0/0xa()
initcall 0x8088d36c: pci_driver_init+0x0/0xa() returned 0.
initcall 0x8088d36c ran for 0 msecs: pci_driver_init+0x0/0xa()
Calling initcall 0x8088d45e: lcd_class_init+0x0/0x41()
initcall 0x8088d45e: lcd_class_init+0x0/0x41() returned 0.
initcall 0x8088d45e ran for 0 msecs: lcd_class_init+0x0/0x41()
Calling initcall 0x8088d53d: video_output_class_init+0x0/0xa()
initcall 0x8088d53d: video_output_class_init+0x0/0xa() returned 0.
initcall 0x8088d53d ran for 0 msecs: video_output_class_init+0x0/0xa()
Calling initcall 0x8088e7ec: tty_class_init+0x0/0x23()
initcall 0x8088e7ec: tty_class_init+0x0/0x23() returned 0.
initcall 0x8088e7ec ran for 0 msecs: tty_class_init+0x0/0x23()
Calling initcall 0x8088f216: vtconsole_class_init+0x0/0xb1()
initcall 0x8088f216: vtconsole_class_init+0x0/0xb1() returned 0.
initcall 0x8088f216 ran for 0 msecs: vtconsole_class_init+0x0/0xb1()
Calling initcall 0x808b5029: eisa_init+0x0/0x25()
EISA bus registered
initcall 0x808b5029: eisa_init+0x0/0x25() returned 0.
initcall 0x808b5029 ran for 3 msecs: eisa_init+0x0/0x25()
Calling initcall 0x8087d3f7: init_pit_clocksource+0x0/0x5b()
initcall 0x8087d3f7: init_pit_clocksource+0x0/0x5b() returned 0.
initcall 0x8087d3f7 ran for 0 msecs: init_pit_clocksource+0x0/0x5b()
Calling initcall 0x808b5cb6: dmi_id_init+0x0/0x265()
initcall 0x808b5cb6: dmi_id_init+0x0/0x265() returned 0.
initcall 0x808b5cb6 ran for 0 msecs: dmi_id_init+0x0/0x265()
Calling initcall 0x808b625c: pci_access_init+0x0/0x2a()
PCI: PCI BIOS revision 3.00 entry at 0xf21d0, last bus=5
initcall 0x808b625c: pci_access_init+0x0/0x2a() returned 0.
initcall 0x808b625c ran for 6 msecs: pci_access_init+0x0/0x2a()
Calling initcall 0x8087cdd5: request_standard_resources+0x0/0x32a()
Setting up standard PCI resources
initcall 0x8087cdd5: request_standard_resources+0x0/0x32a() returned 0.
initcall 0x8087cdd5 ran for 6 msecs: request_standard_resources+0x0/0x32a()
Calling initcall 0x8087d32b: topology_init+0x0/0x2b()
initcall 0x8087d32b: topology_init+0x0/0x2b() returned 0.
initcall 0x8087d32b ran for 0 msecs: topology_init+0x0/0x2b()
Calling initcall 0x8088696b: param_sysfs_init+0x0/0x134()
initcall 0x8088696b: param_sysfs_init+0x0/0x134() returned 0.
initcall 0x8088696b ran for 0 msecs: param_sysfs_init+0x0/0x134()
Calling initcall 0x80889578: init_bio+0x0/0xb6()
initcall 0x80889578: init_bio+0x0/0xb6() returned 0.
initcall 0x80889578 ran for 0 msecs: init_bio+0x0/0xb6()
Calling initcall 0x8088bfa9: genhd_device_init+0x0/0x4c()
initcall 0x8088bfa9: genhd_device_init+0x0/0x4c() returned 0.
initcall 0x8088bfa9 ran for 0 msecs: genhd_device_init+0x0/0x4c()
Calling initcall 0x8088d547: pnp_init+0x0/0x1a()
Linux Plug and Play Support v0.97 (c) Adam Belay
initcall 0x8088d547: pnp_init+0x0/0x1a() returned 0.
initcall 0x8088d547 ran for 3 msecs: pnp_init+0x0/0x1a()
Calling initcall 0x8088ed94: misc_init+0x0/0x78()
initcall 0x8088ed94: misc_init+0x0/0x78() returned 0.
initcall 0x8088ed94 ran for 0 msecs: misc_init+0x0/0x78()
Calling initcall 0x8089c32b: phy_init+0x0/0x25()
Generic PHY: Registered new driver
initcall 0x8089c32b: phy_init+0x0/0x25() returned 0.
initcall 0x8089c32b ran for 0 msecs: phy_init+0x0/0x25()
Calling initcall 0x808a2c36: init_dvbdev+0x0/0xaa()
initcall 0x808a2c36: init_dvbdev+0x0/0xaa() returned 0.
initcall 0x808a2c36 ran for 0 msecs: init_dvbdev+0x0/0xaa()
Calling initcall 0x808a5fbf: init_scsi+0x0/0x7c()
SCSI subsystem initialized
initcall 0x808a5fbf: init_scsi+0x0/0x7c() returned 0.
initcall 0x808a5fbf ran for 3 msecs: init_scsi+0x0/0x7c()
Calling initcall 0x808aea2e: ata_init+0x0/0x6b()
libata version 3.00 loaded.
initcall 0x808aea2e: ata_init+0x0/0x6b() returned 0.
initcall 0x808aea2e ran for 3 msecs: ata_init+0x0/0x6b()
Calling initcall 0x808af6e6: spi_init+0x0/0x67()
initcall 0x808af6e6: spi_init+0x0/0x67() returned 0.
initcall 0x808af6e6 ran for 0 msecs: spi_init+0x0/0x67()
Calling initcall 0x808af9ba: usb_init+0x0/0xbc()
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
initcall 0x808af9ba: usb_init+0x0/0xbc() returned 0.
initcall 0x808af9ba ran for 9 msecs: usb_init+0x0/0xbc()
Calling initcall 0x808b0f29: serio_init+0x0/0x91()
initcall 0x808b0f29: serio_init+0x0/0x91() returned 0.
initcall 0x808b0f29 ran for 0 msecs: serio_init+0x0/0x91()
Calling initcall 0x808b1b13: gameport_init+0x0/0x91()
initcall 0x808b1b13: gameport_init+0x0/0x91() returned 0.
initcall 0x808b1b13 ran for 0 msecs: gameport_init+0x0/0x91()
Calling initcall 0x808b1de9: input_init+0x0/0xf9()
initcall 0x808b1de9: input_init+0x0/0xf9() returned 0.
initcall 0x808b1de9 ran for 0 msecs: input_init+0x0/0xf9()
Calling initcall 0x808b2337: hwmon_init+0x0/0x33()
initcall 0x808b2337: hwmon_init+0x0/0x33() returned 0.
initcall 0x808b2337 ran for 0 msecs: hwmon_init+0x0/0x33()
Calling initcall 0x808b5634: leds_init+0x0/0x23()
initcall 0x808b5634: leds_init+0x0/0x23() returned 0.
initcall 0x808b5634 ran for 0 msecs: leds_init+0x0/0x23()
Calling initcall 0x808b5f1b: dma_bus_init+0x0/0x1e()
initcall 0x808b5f1b: dma_bus_init+0x0/0x1e() returned 0.
initcall 0x808b5f1b ran for 0 msecs: dma_bus_init+0x0/0x1e()
Calling initcall 0x808b5f39: ssb_modinit+0x0/0x56()
initcall 0x808b5f39: ssb_modinit+0x0/0x56() returned 0.
initcall 0x808b5f39 ran for 0 msecs: ssb_modinit+0x0/0x56()
Calling initcall 0x808b692e: pci_legacy_init+0x0/0xe3()
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Transparent bridge - 0000:00:09.0
initcall 0x808b692e: pci_legacy_init+0x0/0xe3() returned 0.
initcall 0x808b692e ran for 12 msecs: pci_legacy_init+0x0/0xe3()
Calling initcall 0x808b6dde: pcibios_irq_init+0x0/0x47f()
PCI: Using IRQ router default [10de/005e] at 0000:00:00.0PCI->APIC IRQ transform: 0000:00:04.0[A] -> IRQ 3PCI->APIC IRQ transform: 0000:00:0a.0[A] -> IRQ 11PCI->APIC IRQ transform: 0000:05:07.0[A] -> IRQ 11PCI->APIC IRQ transform: 0000:01:00.0[A] -> IRQ 5
initcall 0x808b6dde: pcibios_irq_init+0x0/0x47f() returned 0.
initcall 0x808b6dde ran for 15 msecs: pcibios_irq_init+0x0/0x47f()
Calling initcall 0x808b72b0: pcibios_init+0x0/0x7b()
initcall 0x808b72b0: pcibios_init+0x0/0x7b() returned 0.
initcall 0x808b72b0 ran for 50 msecs: pcibios_init+0x0/0x7b()
Calling initcall 0x808b774b: proto_init+0x0/0x28()
initcall 0x808b774b: proto_init+0x0/0x28() returned 0.
initcall 0x808b774b ran for 0 msecs: proto_init+0x0/0x28()
Calling initcall 0x808b7a62: net_dev_init+0x0/0x127()
initcall 0x808b7a62: net_dev_init+0x0/0x127() returned 0.
initcall 0x808b7a62 ran for 0 msecs: net_dev_init+0x0/0x127()
Calling initcall 0x808b7bbd: neigh_init+0x0/0x79()
initcall 0x808b7bbd: neigh_init+0x0/0x79() returned 0.
initcall 0x808b7bbd ran for 0 msecs: neigh_init+0x0/0x79()
Calling initcall 0x808b8146: fib_rules_init+0x0/0x53()
initcall 0x808b8146: fib_rules_init+0x0/0x53() returned 0.
initcall 0x808b8146 ran for 0 msecs: fib_rules_init+0x0/0x53()
Calling initcall 0x808b83be: genl_init+0x0/0xc3()
initcall 0x808b83be: genl_init+0x0/0xc3() returned 0.
initcall 0x808b83be ran for 9 msecs: genl_init+0x0/0xc3()
Calling initcall 0x808ba800: irda_init+0x0/0x9d()irda_init()
NET: Registered protocol family 23
initcall 0x808ba800: irda_init+0x0/0x9d() returned 0.
initcall 0x808ba800 ran for 3 msecs: irda_init+0x0/0x9d()
Calling initcall 0x808bab66: bt_init+0x0/0x53()
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
initcall 0x808bab66: bt_init+0x0/0x53() returned 0.
initcall 0x808bab66 ran for 12 msecs: bt_init+0x0/0x53()
Calling initcall 0x808bb082: atm_init+0x0/0xab()
NET: Registered protocol family 8
NET: Registered protocol family 20
initcall 0x808bb082: atm_init+0x0/0xab() returned 0.
initcall 0x808bb082 ran for 6 msecs: atm_init+0x0/0xab()
Calling initcall 0x808bbd2e: wireless_nlevent_init+0x0/0x35()
initcall 0x808bbd2e: wireless_nlevent_init+0x0/0x35() returned 0.
initcall 0x808bbd2e ran for 0 msecs: wireless_nlevent_init+0x0/0x35()
Calling initcall 0x80633a78: cfg80211_init+0x0/0x4d()
initcall 0x80633a78: cfg80211_init+0x0/0x4d() returned 0.
initcall 0x80633a78 ran for 9 msecs: cfg80211_init+0x0/0x4d()
Calling initcall 0x808bbd63: ieee80211_init+0x0/0x8()
initcall 0x808bbd63: ieee80211_init+0x0/0x8() returned 0.
initcall 0x808bbd63 ran for 0 msecs: ieee80211_init+0x0/0x8()
Calling initcall 0x808bbd6b: rate_control_simple_init+0x0/0xa()
initcall 0x808bbd6b: rate_control_simple_init+0x0/0xa() returned 0.
initcall 0x808bbd6b ran for 0 msecs: rate_control_simple_init+0x0/0xa()
Calling initcall 0x80884abc: hpet_late_init+0x0/0x3e()
initcall 0x80884abc: hpet_late_init+0x0/0x3e() returned -19.
initcall 0x80884abc ran for 0 msecs: hpet_late_init+0x0/0x3e()
Calling initcall 0x80886d95: clocksource_done_booting+0x0/0xd()
initcall 0x80886d95: clocksource_done_booting+0x0/0xd() returned 0.
initcall 0x80886d95 ran for 0 msecs: clocksource_done_booting+0x0/0xd()
Calling initcall 0x80888f18: init_pipe_fs+0x0/0x3b()
initcall 0x80888f18: init_pipe_fs+0x0/0x3b() returned 0.
initcall 0x80888f18 ran for 0 msecs: init_pipe_fs+0x0/0x3b()
Calling initcall 0x808896a7: eventpoll_init+0x0/0x8e()
initcall 0x808896a7: eventpoll_init+0x0/0x8e() returned 0.
initcall 0x808896a7 ran for 0 msecs: eventpoll_init+0x0/0x8e()
Calling initcall 0x80889735: anon_inode_init+0x0/0xe1()
initcall 0x80889735: anon_inode_init+0x0/0xe1() returned 0.
initcall 0x80889735 ran for 0 msecs: anon_inode_init+0x0/0xe1()
Calling initcall 0x8088d61d: pnp_system_init+0x0/0xa()
pnp: the driver 'system' has been registered
initcall 0x8088d61d: pnp_system_init+0x0/0xa() returned 0.
initcall 0x8088d61d ran for 3 msecs: pnp_system_init+0x0/0xa()
Calling initcall 0x8088e73c: chr_dev_init+0x0/0x85()
initcall 0x8088e73c: chr_dev_init+0x0/0x85() returned 0.
initcall 0x8088e73c ran for 0 msecs: chr_dev_init+0x0/0x85()
Calling initcall 0x80893ff8: firmware_class_init+0x0/0x63()
initcall 0x80893ff8: firmware_class_init+0x0/0x63() returned 0.
initcall 0x80893ff8 ran for 0 msecs: firmware_class_init+0x0/0x63()
Calling initcall 0x8089cc17: loopback_init+0x0/0xa()
initcall 0x8089cc17: loopback_init+0x0/0xa() returned 0.
initcall 0x8089cc17 ran for 0 msecs: loopback_init+0x0/0xa()
Calling initcall 0x808b5fec: pcibios_assign_resources+0x0/0x72()
PCI: Bridge: 0000:00:09.0
IO window: c000-cfff
MEM window: da000000-da0fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0b.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0c.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0d.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0e.0
IO window: b000-bfff
MEM window: d8000000-d9ffffff
PREFETCH window: d0000000-d7ffffff
PCI: Setting latency timer of device 0000:00:09.0 to 64
PCI: Setting latency timer of device 0000:00:0b.0 to 64
PCI: Setting latency timer of device 0000:00:0c.0 to 64
PCI: Setting latency timer of device 0000:00:0d.0 to 64
PCI: Setting latency timer of device 0000:00:0e.0 to 64
initcall 0x808b5fec: pcibios_assign_resources+0x0/0x72() returned 0.
initcall 0x808b5fec ran for 63 msecs: pcibios_assign_resources+0x0/0x72()
Calling initcall 0x808b8d32: inet_init+0x0/0x300()
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
IPv4 FIB: Using LC-trie version 0.408
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
initcall 0x808b8d32: inet_init+0x0/0x300() returned 0.
initcall 0x808b8d32 ran for 57 msecs: inet_init+0x0/0x300()
Calling initcall 0x8087b6bb: populate_rootfs+0x0/0xe0()
initcall 0x8087b6bb: populate_rootfs+0x0/0xe0() returned 0.
initcall 0x8087b6bb ran for 0 msecs: populate_rootfs+0x0/0xe0()
Calling initcall 0x8087c3d0: i8259A_init_sysfs+0x0/0x19()
initcall 0x8087c3d0: i8259A_init_sysfs+0x0/0x19() returned 0.
initcall 0x8087c3d0 ran for 0 msecs: i8259A_init_sysfs+0x0/0x19()
Calling initcall 0x8087c4d0: sbf_init+0x0/0xc1()
initcall 0x8087c4d0: sbf_init+0x0/0xc1() returned 0.
initcall 0x8087c4d0 ran for 0 msecs: sbf_init+0x0/0xc1()
Calling initcall 0x8087d312: i8237A_init_sysfs+0x0/0x19()
initcall 0x8087d312: i8237A_init_sysfs+0x0/0x19() returned 0.
initcall 0x8087d312 ran for 0 msecs: i8237A_init_sysfs+0x0/0x19()
Calling initcall 0x8087fba7: cache_sysfs_init+0x0/0x3f()
initcall 0x8087fba7: cache_sysfs_init+0x0/0x3f() returned 0.
initcall 0x8087fba7 ran for 0 msecs: cache_sysfs_init+0x0/0x3f()
Calling initcall 0x80880286: cpuid_init+0x0/0x107()
initcall 0x80880286: cpuid_init+0x0/0x107() returned 0.
initcall 0x80880286 ran for 0 msecs: cpuid_init+0x0/0x107()
Calling initcall 0x8088038d: microcode_init+0x0/0x95()
microcode: CPU0 not a capable Intel processor
microcode: CPU1 not a capable Intel processor
IA-32 Microcode Update Driver: v1.14a <[email protected]>
initcall 0x8088038d: microcode_init+0x0/0x95() returned 0.
initcall 0x8088038d ran for 12 msecs: microcode_init+0x0/0x95()
Calling initcall 0x80882f2c: ioapic_init_sysfs+0x0/0xb8()
initcall 0x80882f2c: ioapic_init_sysfs+0x0/0xb8() returned 0.
initcall 0x80882f2c ran for 0 msecs: ioapic_init_sysfs+0x0/0xb8()
Calling initcall 0x80884b29: add_pcspkr+0x0/0x31()
initcall 0x80884b29: add_pcspkr+0x0/0x31() returned 0.
initcall 0x80884b29 ran for 0 msecs: add_pcspkr+0x0/0x31()
Calling initcall 0x80885438: aes_init+0x0/0x265()
initcall 0x80885438: aes_init+0x0/0x265() returned 0.
initcall 0x80885438 ran for 0 msecs: aes_init+0x0/0x265()
Calling initcall 0x8088610c: create_proc_profile+0x0/0x172()
initcall 0x8088610c: create_proc_profile+0x0/0x172() returned 0.
initcall 0x8088610c ran for 0 msecs: create_proc_profile+0x0/0x172()
Calling initcall 0x808863b4: ioresources_init+0x0/0x35()
initcall 0x808863b4: ioresources_init+0x0/0x35() returned 0.
initcall 0x808863b4 ran for 0 msecs: ioresources_init+0x0/0x35()
Calling initcall 0x80886633: uid_cache_init+0x0/0x7d()
initcall 0x80886633: uid_cache_init+0x0/0x7d() returned 0.
initcall 0x80886633 ran for 0 msecs: uid_cache_init+0x0/0x7d()
Calling initcall 0x80886a9f: init_posix_timers+0x0/0x89()
initcall 0x80886a9f: init_posix_timers+0x0/0x89() returned 0.
initcall 0x80886a9f ran for 0 msecs: init_posix_timers+0x0/0x89()
Calling initcall 0x80886b28: init_posix_cpu_timers+0x0/0x9c()
initcall 0x80886b28: init_posix_cpu_timers+0x0/0x9c() returned 0.
initcall 0x80886b28 ran for 0 msecs: init_posix_cpu_timers+0x0/0x9c()
Calling initcall 0x80886c13: latency_init+0x0/0x1c()
initcall 0x80886c13: latency_init+0x0/0x1c() returned 0.
initcall 0x80886c13 ran for 0 msecs: latency_init+0x0/0x1c()
Calling initcall 0x80886c2f: nsproxy_cache_init+0x0/0x2d()
initcall 0x80886c2f: nsproxy_cache_init+0x0/0x2d() returned 0.
initcall 0x80886c2f ran for 0 msecs: nsproxy_cache_init+0x0/0x2d()
Calling initcall 0x80886c5c: timekeeping_init_device+0x0/0x19()
initcall 0x80886c5c: timekeeping_init_device+0x0/0x19() returned 0.
initcall 0x80886c5c ran for 0 msecs: timekeeping_init_device+0x0/0x19()
Calling initcall 0x80886da2: init_clocksource_sysfs+0x0/0x3f()
initcall 0x80886da2: init_clocksource_sysfs+0x0/0x3f() returned 0.
initcall 0x80886da2 ran for 0 msecs: init_clocksource_sysfs+0x0/0x3f()
Calling initcall 0x80886e5d: init_timer_list_procfs+0x0/0x26()
initcall 0x80886e5d: init_timer_list_procfs+0x0/0x26() returned 0.
initcall 0x80886e5d ran for 0 msecs: init_timer_list_procfs+0x0/0x26()
Calling initcall 0x80886e8d: init+0x0/0x88()
initcall 0x80886e8d: init+0x0/0x88() returned 0.
initcall 0x80886e8d ran for 0 msecs: init+0x0/0x88()
Calling initcall 0x80886f15: proc_dma_init+0x0/0x1c()
initcall 0x80886f15: proc_dma_init+0x0/0x1c() returned 0.
initcall 0x80886f15 ran for 0 msecs: proc_dma_init+0x0/0x1c()
Calling initcall 0x8012f602: percpu_modinit+0x0/0x68()
initcall 0x8012f602: percpu_modinit+0x0/0x68() returned 0.
initcall 0x8012f602 ran for 0 msecs: percpu_modinit+0x0/0x68()
Calling initcall 0x8088708f: kallsyms_init+0x0/0x1f()
initcall 0x8088708f: kallsyms_init+0x0/0x1f() returned 0.
initcall 0x8088708f ran for 0 msecs: kallsyms_init+0x0/0x1f()
Calling initcall 0x8088724d: relay_init+0x0/0x3()
initcall 0x8088724d: relay_init+0x0/0x3() returned 0.
initcall 0x8088724d ran for 0 msecs: relay_init+0x0/0x3()
Calling initcall 0x80887250: utsname_sysctl_init+0x0/0xd()
initcall 0x80887250: utsname_sysctl_init+0x0/0xd() returned 0.
initcall 0x80887250 ran for 0 msecs: utsname_sysctl_init+0x0/0xd()
Calling initcall 0x8088804a: init_per_zone_pages_min+0x0/0x44()
initcall 0x8088804a: init_per_zone_pages_min+0x0/0x44() returned 0.
initcall 0x8088804a ran for 0 msecs: init_per_zone_pages_min+0x0/0x44()
Calling initcall 0x80888b29: pdflush_init+0x0/0x12()
initcall 0x80888b29: pdflush_init+0x0/0x12() returned 0.
initcall 0x80888b29 ran for 0 msecs: pdflush_init+0x0/0x12()
Calling initcall 0x80888b51: kswapd_init+0x0/0x18()
initcall 0x80888b51: kswapd_init+0x0/0x18() returned 0.
initcall 0x80888b51 ran for 0 msecs: kswapd_init+0x0/0x18()
Calling initcall 0x80888ba8: setup_vmstat+0x0/0x3a()
initcall 0x80888ba8: setup_vmstat+0x0/0x3a() returned 0.
initcall 0x80888ba8 ran for 0 msecs: setup_vmstat+0x0/0x3a()
Calling initcall 0x80888d03: init_emergency_pool+0x0/0x60()
initcall 0x80888d03: init_emergency_pool+0x0/0x60() returned 0.
initcall 0x80888d03 ran for 0 msecs: init_emergency_pool+0x0/0x60()
Calling initcall 0x80888d63: procswaps_init+0x0/0x1c()
initcall 0x80888d63: procswaps_init+0x0/0x1c() returned 0.
initcall 0x80888d63 ran for 0 msecs: procswaps_init+0x0/0x1c()
Calling initcall 0x80888d7f: hugetlb_init+0x0/0x56()
Total HugeTLB memory allocated, 0
initcall 0x80888d7f: hugetlb_init+0x0/0x56() returned 0.
initcall 0x80888d7f ran for 3 msecs: hugetlb_init+0x0/0x56()
Calling initcall 0x80888e07: init_tmpfs+0x0/0xb0()
initcall 0x80888e07: init_tmpfs+0x0/0xb0() returned 0.
initcall 0x80888e07 ran for 0 msecs: init_tmpfs+0x0/0xb0()
Calling initcall 0x80888f53: fasync_init+0x0/0x2d()
initcall 0x80888f53: fasync_init+0x0/0x2d() returned 0.
initcall 0x80888f53 ran for 0 msecs: fasync_init+0x0/0x2d()
Calling initcall 0x808894c4: aio_setup+0x0/0x6b()
initcall 0x808894c4: aio_setup+0x0/0x6b() returned 0.
initcall 0x808894c4 ran for 0 msecs: aio_setup+0x0/0x6b()
Calling initcall 0x8088969a: inotify_setup+0x0/0xd()
initcall 0x8088969a: inotify_setup+0x0/0xd() returned 0.
initcall 0x8088969a ran for 0 msecs: inotify_setup+0x0/0xd()
Calling initcall 0x8088982a: init_mbcache+0x0/0xd()
initcall 0x8088982a: init_mbcache+0x0/0xd() returned 0.
initcall 0x8088982a ran for 0 msecs: init_mbcache+0x0/0xd()
Calling initcall 0x80889837: dquot_init+0x0/0xdb()
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
initcall 0x80889837: dquot_init+0x0/0xdb() returned 0.
initcall 0x80889837 ran for 6 msecs: dquot_init+0x0/0xdb()
Calling initcall 0x80889912: dnotify_init+0x0/0x2d()
initcall 0x80889912: dnotify_init+0x0/0x2d() returned 0.
initcall 0x80889912 ran for 0 msecs: dnotify_init+0x0/0x2d()
Calling initcall 0x80889d30: configfs_init+0x0/0x8c()
initcall 0x80889d30: configfs_init+0x0/0x8c() returned 0.
initcall 0x80889d30 ran for 0 msecs: configfs_init+0x0/0x8c()
Calling initcall 0x80889dbc: init_devpts_fs+0x0/0x2d()
initcall 0x80889dbc: init_devpts_fs+0x0/0x2d() returned 0.
initcall 0x80889dbc ran for 0 msecs: init_devpts_fs+0x0/0x2d()
Calling initcall 0x80889de9: init_dlm+0x0/0x84()
DLM (built Oct 15 2007 13:14:21) installed
initcall 0x80889de9: init_dlm+0x0/0x84() returned 0.
initcall 0x80889de9 ran for 3 msecs: init_dlm+0x0/0x84()
Calling initcall 0x80889e6d: init_reiserfs_fs+0x0/0x86()
initcall 0x80889e6d: init_reiserfs_fs+0x0/0x86() returned 0.
initcall 0x80889e6d ran for 0 msecs: init_reiserfs_fs+0x0/0x86()
Calling initcall 0x80889fb6: init_ext3_fs+0x0/0x61()
initcall 0x80889fb6: init_ext3_fs+0x0/0x61() returned 0.
initcall 0x80889fb6 ran for 0 msecs: init_ext3_fs+0x0/0x61()
Calling initcall 0x8088a0c4: journal_init+0x0/0xc4()
initcall 0x8088a0c4: journal_init+0x0/0xc4() returned 0.
initcall 0x8088a0c4 ran for 0 msecs: journal_init+0x0/0xc4()
Calling initcall 0x8088a188: init_ext2_fs+0x0/0x51()
initcall 0x8088a188: init_ext2_fs+0x0/0x51() returned 0.
initcall 0x8088a188 ran for 0 msecs: init_ext2_fs+0x0/0x51()
Calling initcall 0x8088a1d9: init_cramfs_fs+0x0/0x25()
initcall 0x8088a1d9: init_cramfs_fs+0x0/0x25() returned 0.
initcall 0x8088a1d9 ran for 0 msecs: init_cramfs_fs+0x0/0x25()
Calling initcall 0x8088a208: init_ramfs_fs+0x0/0xa()
initcall 0x8088a208: init_ramfs_fs+0x0/0xa() returned 0.
initcall 0x8088a208 ran for 0 msecs: init_ramfs_fs+0x0/0xa()
Calling initcall 0x8088a212: init_hugetlbfs_fs+0x0/0x76()
initcall 0x8088a212: init_hugetlbfs_fs+0x0/0x76() returned 0.
initcall 0x8088a212 ran for 0 msecs: init_hugetlbfs_fs+0x0/0x76()
Calling initcall 0x8088a288: init_minix_fs+0x0/0x51()
initcall 0x8088a288: init_minix_fs+0x0/0x51() returned 0.
initcall 0x8088a288 ran for 0 msecs: init_minix_fs+0x0/0x51()
Calling initcall 0x8088a30c: init_fat_fs+0x0/0x48()
initcall 0x8088a30c: init_fat_fs+0x0/0x48() returned 0.
initcall 0x8088a30c ran for 0 msecs: init_fat_fs+0x0/0x48()
Calling initcall 0x8088a354: init_msdos_fs+0x0/0xa()
initcall 0x8088a354: init_msdos_fs+0x0/0xa() returned 0.
initcall 0x8088a354 ran for 0 msecs: init_msdos_fs+0x0/0xa()
Calling initcall 0x8088a3f6: init_nfs_fs+0x0/0xa6()
initcall 0x8088a3f6: init_nfs_fs+0x0/0xa6() returned 0.
initcall 0x8088a3f6 ran for 0 msecs: init_nfs_fs+0x0/0xa6()
Calling initcall 0x8088a601: init_nfsd+0x0/0x98()
Installing knfsd (copyright (C) 1996 [email protected]).
initcall 0x8088a601: init_nfsd+0x0/0x98() returned 0.
initcall 0x8088a601 ran for 3 msecs: init_nfsd+0x0/0x98()
Calling initcall 0x8088a699: init_nlm+0x0/0x18()
initcall 0x8088a699: init_nlm+0x0/0x18() returned 0.
initcall 0x8088a699 ran for 0 msecs: init_nlm+0x0/0x18()
Calling initcall 0x8088a6b1: init_nls_cp850+0x0/0xa()
initcall 0x8088a6b1: init_nls_cp850+0x0/0xa() returned 0.
initcall 0x8088a6b1 ran for 0 msecs: init_nls_cp850+0x0/0xa()
Calling initcall 0x8088a6bb: init_nls_cp860+0x0/0xa()
initcall 0x8088a6bb: init_nls_cp860+0x0/0xa() returned 0.
initcall 0x8088a6bb ran for 0 msecs: init_nls_cp860+0x0/0xa()
Calling initcall 0x8088a6c5: init_nls_cp863+0x0/0xa()
initcall 0x8088a6c5: init_nls_cp863+0x0/0xa() returned 0.
initcall 0x8088a6c5 ran for 0 msecs: init_nls_cp863+0x0/0xa()
Calling initcall 0x8088a6cf: init_nls_cp866+0x0/0xa()
initcall 0x8088a6cf: init_nls_cp866+0x0/0xa() returned 0.
initcall 0x8088a6cf ran for 0 msecs: init_nls_cp866+0x0/0xa()
Calling initcall 0x8088a6d9: init_nls_cp874+0x0/0xa()
initcall 0x8088a6d9: init_nls_cp874+0x0/0xa() returned 0.
initcall 0x8088a6d9 ran for 0 msecs: init_nls_cp874+0x0/0xa()
Calling initcall 0x8088a6e3: init_nls_cp936+0x0/0xa()
initcall 0x8088a6e3: init_nls_cp936+0x0/0xa() returned 0.
initcall 0x8088a6e3 ran for 0 msecs: init_nls_cp936+0x0/0xa()
Calling initcall 0x8088a6ed: init_nls_iso8859_2+0x0/0xa()
initcall 0x8088a6ed: init_nls_iso8859_2+0x0/0xa() returned 0.
initcall 0x8088a6ed ran for 0 msecs: init_nls_iso8859_2+0x0/0xa()
Calling initcall 0x8088a6f7: init_nls_iso8859_3+0x0/0xa()
initcall 0x8088a6f7: init_nls_iso8859_3+0x0/0xa() returned 0.
initcall 0x8088a6f7 ran for 0 msecs: init_nls_iso8859_3+0x0/0xa()
Calling initcall 0x8088a701: init_nls_iso8859_13+0x0/0xa()
initcall 0x8088a701: init_nls_iso8859_13+0x0/0xa() returned 0.
initcall 0x8088a701 ran for 0 msecs: init_nls_iso8859_13+0x0/0xa()
Calling initcall 0x8088a70b: init_nls_iso8859_14+0x0/0xa()
initcall 0x8088a70b: init_nls_iso8859_14+0x0/0xa() returned 0.
initcall 0x8088a70b ran for 0 msecs: init_nls_iso8859_14+0x0/0xa()
Calling initcall 0x8088a748: init_sysv_fs+0x0/0x3f()
initcall 0x8088a748: init_sysv_fs+0x0/0x3f() returned 0.
initcall 0x8088a748 ran for 0 msecs: init_sysv_fs+0x0/0x3f()
Calling initcall 0x8088a787: init_smb_fs+0x0/0x63()
initcall 0x8088a787: init_smb_fs+0x0/0x63() returned 0.
initcall 0x8088a787 ran for 0 msecs: init_smb_fs+0x0/0x63()
Calling initcall 0x8088a7ea: init_cifs+0x0/0x497()
initcall 0x8088a7ea: init_cifs+0x0/0x497() returned 0.
initcall 0x8088a7ea ran for 0 msecs: init_cifs+0x0/0x497()
Calling initcall 0x8088ac81: init_hpfs_fs+0x0/0x51()
initcall 0x8088ac81: init_hpfs_fs+0x0/0x51() returned 0.
initcall 0x8088ac81 ran for 0 msecs: init_hpfs_fs+0x0/0x51()
Calling initcall 0x8088acd2: init_ntfs_fs+0x0/0x22c()
NTFS driver 2.1.29 [Flags: R/O DEBUG].
initcall 0x8088acd2: init_ntfs_fs+0x0/0x22c() returned 0.
initcall 0x8088acd2 ran for 3 msecs: init_ntfs_fs+0x0/0x22c()
Calling initcall 0x8088aefe: init_autofs_fs+0x0/0xa()
initcall 0x8088aefe: init_autofs_fs+0x0/0xa() returned 0.
initcall 0x8088aefe ran for 0 msecs: init_autofs_fs+0x0/0xa()
Calling initcall 0x8088af08: init_udf_fs+0x0/0x51()
initcall 0x8088af08: init_udf_fs+0x0/0x51() returned 0.
initcall 0x8088af08 ran for 0 msecs: init_udf_fs+0x0/0x51()
Calling initcall 0x8088afe1: init_xfs_fs+0x0/0x68()
SGI XFS with realtime, no debug enabled
initcall 0x8088afe1: init_xfs_fs+0x0/0x68() returned 0.
initcall 0x8088afe1 ran for 3 msecs: init_xfs_fs+0x0/0x68()
Calling initcall 0x8088b049: init_befs_fs+0x0/0x71()
BeFS version: 0.9.3
initcall 0x8088b049: init_befs_fs+0x0/0x71() returned 0.
initcall 0x8088b049 ran for 3 msecs: init_befs_fs+0x0/0x71()
Calling initcall 0x8088b0f3: ocfs2_init+0x0/0x376()
OCFS2 1.3.3
initcall 0x8088b0f3: ocfs2_init+0x0/0x376() returned 0.
initcall 0x8088b0f3 ran for 3 msecs: ocfs2_init+0x0/0x376()
Calling initcall 0x8088b50e: init_o2nm+0x0/0xb3()
OCFS2 Node Manager 1.3.3
initcall 0x8088b50e: init_o2nm+0x0/0xb3() returned 0.
initcall 0x8088b50e ran for 3 msecs: init_o2nm+0x0/0xb3()
Calling initcall 0x8088b5c1: dlm_init+0x0/0xd6()
OCFS2 DLM 1.3.3
initcall 0x8088b5c1: dlm_init+0x0/0xd6() returned 0.
initcall 0x8088b5c1 ran for 0 msecs: dlm_init+0x0/0xd6()
Calling initcall 0x8088b697: init_dlmfs_fs+0x0/0x98()
OCFS2 DLMFS 1.3.3
OCFS2 User DLM kernel interface loaded
initcall 0x8088b697: init_dlmfs_fs+0x0/0x98() returned 0.
initcall 0x8088b697 ran for 3 msecs: init_dlmfs_fs+0x0/0x98()
Calling initcall 0x8088b72f: init_mqueue_fs+0x0/0xb5()
initcall 0x8088b72f: init_mqueue_fs+0x0/0xb5() returned 0.
initcall 0x8088b72f ran for 0 msecs: init_mqueue_fs+0x0/0xb5()
Calling initcall 0x8088b915: key_proc_init+0x0/0x2c()
initcall 0x8088b915: key_proc_init+0x0/0x2c() returned 0.
initcall 0x8088b915 ran for 0 msecs: key_proc_init+0x0/0x2c()
Calling initcall 0x8088ba37: crypto_algapi_init+0x0/0x8()
initcall 0x8088ba37: crypto_algapi_init+0x0/0x8() returned 0.
initcall 0x8088ba37 ran for 0 msecs: crypto_algapi_init+0x0/0x8()
Calling initcall 0x8088ba59: cryptomgr_init+0x0/0xa()
initcall 0x8088ba59: cryptomgr_init+0x0/0xa() returned 0.
initcall 0x8088ba59 ran for 0 msecs: cryptomgr_init+0x0/0xa()
Calling initcall 0x8088ba63: init+0x0/0x49()
initcall 0x8088ba63: init+0x0/0x49() returned 0.
initcall 0x8088ba63 ran for 0 msecs: init+0x0/0x49()
Calling initcall 0x8088baac: init+0x0/0xa()
initcall 0x8088baac: init+0x0/0xa() returned 0.
initcall 0x8088baac ran for 0 msecs: init+0x0/0xa()
Calling initcall 0x8088bab6: init+0x0/0xa()
initcall 0x8088bab6: init+0x0/0xa() returned 0.
initcall 0x8088bab6 ran for 0 msecs: init+0x0/0xa()
Calling initcall 0x8088bac0: crypto_ecb_module_init+0x0/0xa()
initcall 0x8088bac0: crypto_ecb_module_init+0x0/0xa() returned 0.
initcall 0x8088bac0 ran for 0 msecs: crypto_ecb_module_init+0x0/0xa()
Calling initcall 0x8088baca: crypto_cbc_module_init+0x0/0xa()
initcall 0x8088baca: crypto_cbc_module_init+0x0/0xa() returned 0.
initcall 0x8088baca ran for 0 msecs: crypto_cbc_module_init+0x0/0xa()
Calling initcall 0x8088bad4: cryptd_init+0x0/0xa0()
initcall 0x8088bad4: cryptd_init+0x0/0xa0() returned 0.
initcall 0x8088bad4 ran for 0 msecs: cryptd_init+0x0/0xa0()
Calling initcall 0x8088bb74: init+0x0/0x2f()
initcall 0x8088bb74: init+0x0/0x2f() returned 0.
initcall 0x8088bb74 ran for 0 msecs: init+0x0/0x2f()
Calling initcall 0x8088bba3: aes_init+0x0/0x2ad()
initcall 0x8088bba3: aes_init+0x0/0x2ad() returned 0.
initcall 0x8088bba3 ran for 0 msecs: aes_init+0x0/0x2ad()
Calling initcall 0x8088be50: init+0x0/0xa()
initcall 0x8088be50: init+0x0/0xa() returned 0.
initcall 0x8088be50 ran for 0 msecs: init+0x0/0xa()
Calling initcall 0x8088be5a: arc4_init+0x0/0xa()
initcall 0x8088be5a: arc4_init+0x0/0xa() returned 0.
initcall 0x8088be5a ran for 0 msecs: arc4_init+0x0/0xa()
Calling initcall 0x8088be64: init+0x0/0xa()
initcall 0x8088be64: init+0x0/0xa() returned 0.
initcall 0x8088be64 ran for 0 msecs: init+0x0/0xa()
Calling initcall 0x8088be6e: init+0x0/0xa()
initcall 0x8088be6e: init+0x0/0xa() returned 0.
initcall 0x8088be6e ran for 0 msecs: init+0x0/0xa()
Calling initcall 0x8088c124: noop_init+0x0/0xa()
io scheduler noop registered
initcall 0x8088c124: noop_init+0x0/0xa() returned 0.
initcall 0x8088c124 ran for 3 msecs: noop_init+0x0/0xa()
Calling initcall 0x8088c12e: as_init+0x0/0xa()
io scheduler anticipatory registered (default)
initcall 0x8088c12e: as_init+0x0/0xa() returned 0.
initcall 0x8088c12e ran for 3 msecs: as_init+0x0/0xa()
Calling initcall 0x8088c138: blk_trace_init+0x0/0x33()
initcall 0x8088c138: blk_trace_init+0x0/0x33() returned 0.
initcall 0x8088c138 ran for 0 msecs: blk_trace_init+0x0/0x33()
Calling initcall 0x8088c592: pci_init+0x0/0x28()
Boot video device is 0000:01:00.0
initcall 0x8088c592: pci_init+0x0/0x28() returned 0.
initcall 0x8088c592 ran for 12 msecs: pci_init+0x0/0x28()
Calling initcall 0x8088d3a7: pci_proc_init+0x0/0x5b()
initcall 0x8088d3a7: pci_proc_init+0x0/0x5b() returned 0.
initcall 0x8088d3a7 ran for 0 msecs: pci_proc_init+0x0/0x5b()
Calling initcall 0x8088d49f: ltv350qv_init+0x0/0xa()
initcall 0x8088d49f: ltv350qv_init+0x0/0xa() returned 0.
initcall 0x8088d49f ran for 0 msecs: ltv350qv_init+0x0/0xa()
Calling initcall 0x8088d8fa: isapnp_init+0x0/0xd1c()
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
initcall 0x8088d8fa: isapnp_init+0x0/0xd1c() returned 0.
initcall 0x8088d8fa ran for 343 msecs: isapnp_init+0x0/0xd1c()
Calling initcall 0x8088e7c1: rand_initialize+0x0/0x21()
initcall 0x8088e7c1: rand_initialize+0x0/0x21() returned 0.
initcall 0x8088e7c1 ran for 0 msecs: rand_initialize+0x0/0x21()
Calling initcall 0x8088e80f: tty_init+0x0/0x1c8()
initcall 0x8088e80f: tty_init+0x0/0x1c8() returned 0.
initcall 0x8088e80f ran for 0 msecs: tty_init+0x0/0x1c8()
Calling initcall 0x8088e9fa: pty_init+0x0/0x39a()
initcall 0x8088e9fa: pty_init+0x0/0x39a() returned 0.
initcall 0x8088e9fa ran for 6 msecs: pty_init+0x0/0x39a()
Calling initcall 0x8088f2e7: espserial_init+0x0/0x5b0()
ESP serial driver version 2.2 (DMA 0)
initcall 0x8088f2e7: espserial_init+0x0/0x5b0() returned 0.
initcall 0x8088f2e7 ran for 3 msecs: espserial_init+0x0/0x5b0()
Calling initcall 0x8088feeb: cy_init+0x0/0x3e5()
Cyclades driver 2.5 (built Oct 15 2007 13:14:20)
initcall 0x8088feeb: cy_init+0x0/0x3e5() returned 0.
initcall 0x8088feeb ran for 15 msecs: cy_init+0x0/0x3e5()
Calling initcall 0x80890c45: epca_module_init+0x0/0x416()
DIGI epca driver version 1.3.0.1-LK2.6 loaded.
initcall 0x80890c45: epca_module_init+0x0/0x416() returned 0.
initcall 0x80890c45 ran for 19 msecs: epca_module_init+0x0/0x416()
Calling initcall 0x80891260: n_hdlc_init+0x0/0x8b()
HDLC line discipline: version $Revision: 4.8 $, maxframe=4096N_HDLC line discipline registered.
initcall 0x80891260: n_hdlc_init+0x0/0x8b() returned 0.
initcall 0x80891260 ran for 9 msecs: n_hdlc_init+0x0/0x8b()
Calling initcall 0x80891b61: sx_init+0x0/0x2d0()
initcall 0x80891b61: sx_init+0x0/0x2d0() returned 0.
initcall 0x80891b61 ran for 0 msecs: sx_init+0x0/0x2d0()
Calling initcall 0x80891e31: rio_init+0x0/0xb2c()
initcall 0x80891e31: rio_init+0x0/0xb2c() returned -5.
initcall 0x80891e31 ran for 0 msecs: rio_init+0x0/0xb2c()
initcall at 0x80891e31: rio_init+0x0/0xb2c(): returned with error code -5
Calling initcall 0x8089295d: nvram_init+0x0/0x79()
Non-volatile memory driver v1.2
initcall 0x8089295d: nvram_init+0x0/0x79() returned 0.
initcall 0x8089295d ran for 0 msecs: nvram_init+0x0/0x79()
Calling initcall 0x808929d6: toshiba_init+0x0/0x30b()
toshiba: not a supported Toshiba laptop
initcall 0x808929d6: toshiba_init+0x0/0x30b() returned -19.
initcall 0x808929d6 ran for 3 msecs: toshiba_init+0x0/0x30b()
Calling initcall 0x80892ce1: mod_init+0x0/0x1b3()
initcall 0x80892ce1: mod_init+0x0/0x1b3() returned -19.
initcall 0x80892ce1 ran for 0 msecs: mod_init+0x0/0x1b3()
Calling initcall 0x80892f5e: mod_init+0x0/0xa3()
initcall 0x80892f5e: mod_init+0x0/0xa3() returned -19.
initcall 0x80892f5e ran for 0 msecs: mod_init+0x0/0xa3()
Calling initcall 0x80893001: mod_init+0x0/0x95()
initcall 0x80893001: mod_init+0x0/0x95() returned -19.
initcall 0x80893001 ran for 0 msecs: mod_init+0x0/0x95()
Calling initcall 0x80893096: pc8736x_gpio_init+0x0/0x322()
platform pc8736x_gpio.0: NatSemi pc8736x GPIO Driver Initializing
platform pc8736x_gpio.0: no device found
initcall 0x80893096: pc8736x_gpio_init+0x0/0x322() returned -19.
initcall 0x80893096 ran for 6 msecs: pc8736x_gpio_init+0x0/0x322()
Calling initcall 0x808933b8: nsc_gpio_init+0x0/0x13()nsc_gpio initializing
initcall 0x808933b8: nsc_gpio_init+0x0/0x13() returned 0.
initcall 0x808933b8 ran for 3 msecs: nsc_gpio_init+0x0/0x13()
Calling initcall 0x808933cb: cs5535_gpio_init+0x0/0x14b()cs5535_gpio: DIVIL not found
initcall 0x808933cb: cs5535_gpio_init+0x0/0x14b() returned -19.
initcall 0x808933cb ran for 0 msecs: cs5535_gpio_init+0x0/0x14b()
Calling initcall 0x8089389f: serial8250_init+0x0/0x10e()
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
initcall 0x8089389f: serial8250_init+0x0/0x10e() returned 0.
initcall 0x8089389f ran for 12 msecs: serial8250_init+0x0/0x10e()
Calling initcall 0x80893fc9: isa_bus_init+0x0/0x2f()
initcall 0x80893fc9: isa_bus_init+0x0/0x2f() returned 0.
initcall 0x80893fc9 ran for 0 msecs: isa_bus_init+0x0/0x2f()
Calling initcall 0x8089405b: topology_sysfs_init+0x0/0x44()
initcall 0x8089405b: topology_sysfs_init+0x0/0x44() returned 0.
initcall 0x8089405b ran for 0 msecs: topology_sysfs_init+0x0/0x44()
Calling initcall 0x8089409f: rd_init+0x0/0x17c()
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
initcall 0x8089409f: rd_init+0x0/0x17c() returned 0.
initcall 0x8089409f ran for 6 msecs: rd_init+0x0/0x17c()
Calling initcall 0x80894245: loop_init+0x0/0x140()
loop: module loaded
initcall 0x80894245: loop_init+0x0/0x140() returned 0.
initcall 0x80894245 ran for 3 msecs: loop_init+0x0/0x140()
Calling initcall 0x803bceae: DAC960_init_module+0x0/0x43()
initcall 0x803bceae: DAC960_init_module+0x0/0x43() returned 0.
initcall 0x803bceae ran for 0 msecs: DAC960_init_module+0x0/0x43()
Calling initcall 0x80894399: init_cryptoloop+0x0/0x25()
initcall 0x80894399: init_cryptoloop+0x0/0x25() returned 0.
initcall 0x80894399 ran for 0 msecs: init_cryptoloop+0x0/0x25()
Calling initcall 0x808943be: carm_init+0x0/0x11()
initcall 0x808943be: carm_init+0x0/0x11() returned 0.
initcall 0x808943be ran for 0 msecs: carm_init+0x0/0x11()
Calling initcall 0x808943cf: e1000_init_module+0x0/0x7c()
Intel(R) PRO/1000 Network Driver - version 7.3.20-k2
Copyright (c) 1999-2006 Intel Corporation.
initcall 0x808943cf: e1000_init_module+0x0/0x7c() returned 0.
initcall 0x808943cf ran for 9 msecs: e1000_init_module+0x0/0x7c()
Calling initcall 0x80895da6: bonding_init+0x0/0x771()
Ethernet Channel Bonding Driver: v3.1.3 (June 13, 2007)
bonding: Warning: either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.txt for details. initcall 0x80895da6: bonding_init+0x0/0x771() returned 0.
initcall 0x80895da6 ran for 19 msecs: bonding_init+0x0/0x771()
Calling initcall 0x80896e02: gem_init+0x0/0x11()
initcall 0x80896e02: gem_init+0x0/0x11() returned 0.
initcall 0x80896e02 ran for 0 msecs: gem_init+0x0/0x11()
Calling initcall 0x80896e13: cas_init+0x0/0x31()
initcall 0x80896e13: cas_init+0x0/0x31() returned 0.
initcall 0x80896e13 ran for 0 msecs: cas_init+0x0/0x31()
Calling initcall 0x8089881f: vortex_init+0x0/0xc1()
initcall 0x8089881f: vortex_init+0x0/0xc1() returned 0.
initcall 0x8089881f ran for 0 msecs: vortex_init+0x0/0xc1()
Calling initcall 0x8089897e: ne2k_pci_init+0x0/0x11()
initcall 0x8089897e: ne2k_pci_init+0x0/0x11() returned 0.
initcall 0x8089897e ran for 0 msecs: ne2k_pci_init+0x0/0x11()
Calling initcall 0x80899b83: pcnet32_init_module+0x0/0x104()
pcnet32.c:v1.34 14.Aug.2007 [email protected]
initcall 0x80899b83: pcnet32_init_module+0x0/0x104() returned 0.
initcall 0x80899b83 ran for 6 msecs: pcnet32_init_module+0x0/0x104()
Calling initcall 0x80899c87: e100_init_module+0x0/0x58()
e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
initcall 0x80899c87: e100_init_module+0x0/0x58() returned 0.
initcall 0x80899c87 ran for 6 msecs: e100_init_module+0x0/0x58()
Calling initcall 0x8089aa16: tlan_probe+0x0/0x2c3()
ThunderLAN driver v1.15
TLAN: 0 devices installed, PCI: 0 EISA: 0
initcall 0x8089aa16: tlan_probe+0x0/0x2c3() returned -19.
initcall 0x8089aa16 ran for 6 msecs: tlan_probe+0x0/0x2c3()
Calling initcall 0x8089ad54: sis900_init_module+0x0/0x11()
initcall 0x8089ad54: sis900_init_module+0x0/0x11() returned 0.
initcall 0x8089ad54 ran for 0 msecs: sis900_init_module+0x0/0x11()
Calling initcall 0x8089b638: fealnx_init+0x0/0x11()
initcall 0x8089b638: fealnx_init+0x0/0x11() returned 0.
initcall 0x8089b638 ran for 0 msecs: fealnx_init+0x0/0x11()
Calling initcall 0x8089bc30: rhine_init+0x0/0x5d()
initcall 0x8089bc30: rhine_init+0x0/0x5d() returned 0.
initcall 0x8089bc30 ran for 0 msecs: rhine_init+0x0/0x5d()
Calling initcall 0x8089c35a: marvell_init+0x0/0x4b()
Marvell 88E1101: Registered new driver
Marvell 88E1112: Registered new driver
Marvell 88E1111: Registered new driver
Marvell 88E1145: Registered new driver
initcall 0x8089c35a: marvell_init+0x0/0x4b() returned 0.
initcall 0x8089c35a ran for 15 msecs: marvell_init+0x0/0x4b()
Calling initcall 0x8089c3a5: davicom_init+0x0/0x49()
Davicom DM9161E: Registered new driver
Davicom DM9161A: Registered new driver
Davicom DM9131: Registered new driver
initcall 0x8089c3a5: davicom_init+0x0/0x49() returned 0.
initcall 0x8089c3a5 ran for 9 msecs: davicom_init+0x0/0x49()
Calling initcall 0x8089c3ee: qs6612_init+0x0/0xa()
QS6612: Registered new driver
initcall 0x8089c3ee: qs6612_init+0x0/0xa() returned 0.
initcall 0x8089c3ee ran for 3 msecs: qs6612_init+0x0/0xa()
Calling initcall 0x8089c3f8: vsc8244_init+0x0/0xa()
Vitesse VSC8244: Registered new driver
initcall 0x8089c3f8: vsc8244_init+0x0/0xa() returned 0.
initcall 0x8089c3f8 ran for 3 msecs: vsc8244_init+0x0/0xa()
Calling initcall 0x8089c402: ip175c_init+0x0/0xa()
ICPlus IP175C: Registered new driver
initcall 0x8089c402: ip175c_init+0x0/0xa() returned 0.
initcall 0x8089c402 ran for 3 msecs: ip175c_init+0x0/0xa()
Calling initcall 0x8089c40c: sundance_init+0x0/0x11()
initcall 0x8089c40c: sundance_init+0x0/0x11() returned 0.
initcall 0x8089c40c ran for 0 msecs: sundance_init+0x0/0x11()
Calling initcall 0x8089cb8b: net_olddevs_init+0x0/0x8c()
initcall 0x8089cb8b: net_olddevs_init+0x0/0x8c() returned 0.
initcall 0x8089cb8b ran for 3 msecs: net_olddevs_init+0x0/0x8c()
Calling initcall 0x8089cc83: init_nic+0x0/0x2b()forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
PCI: Setting latency timer of device 0000:00:0a.0 to 64
forcedeth: using HIGHDMA
eth0: forcedeth.c: subsystem: 01043:8141 bound to 0000:00:0a.0
initcall 0x8089cc83: init_nic+0x0/0x2b() returned 0.
initcall 0x8089cc83 ran for 508 msecs: init_nic+0x0/0x2b()
Calling initcall 0x8089e024: rtl8139_init_module+0x0/0x11()
8139too Fast Ethernet driver 0.9.28
eth1: RealTek RTL8139 at 0xc000, 00:c0:df:03:68:5d, IRQ 11
eth1: Identified 8139 chip type 'RTL-8139B'
initcall 0x8089e024: rtl8139_init_module+0x0/0x11() returned 0.
initcall 0x8089e024 ran for 12 msecs: rtl8139_init_module+0x0/0x11()
Calling initcall 0x8089e92d: eql_init_module+0x0/0x53()
Equalizer2002: Simon Janes ([email protected]) and David S. Miller ([email protected])
initcall 0x8089e92d: eql_init_module+0x0/0x53() returned 0.
initcall 0x8089e92d ran for 6 msecs: eql_init_module+0x0/0x53()
Calling initcall 0x8089ec67: olympic_pci_init+0x0/0x11()
initcall 0x8089ec67: olympic_pci_init+0x0/0x11() returned 0.
initcall 0x8089ec67 ran for 0 msecs: olympic_pci_init+0x0/0x11()
Calling initcall 0x8089eebe: hdlc_module_init+0x0/0x39()
HDLC support module revision 1.21
initcall 0x8089eebe: hdlc_module_init+0x0/0x39() returned 0.
initcall 0x8089eebe ran for 3 msecs: hdlc_module_init+0x0/0x39()
Calling initcall 0x8089eef7: mod_init+0x0/0xd()
initcall 0x8089eef7: mod_init+0x0/0xd() returned 0.
initcall 0x8089eef7 ran for 0 msecs: mod_init+0x0/0xd()
Calling initcall 0x8089ef04: mod_init+0x0/0xd()
initcall 0x8089ef04: mod_init+0x0/0xd() returned 0.
initcall 0x8089ef04 ran for 0 msecs: mod_init+0x0/0xd()
Calling initcall 0x8089ef11: init_dlci+0x0/0x30()
DLCI driver v0.35, 4 Jan 1997, [email protected].
initcall 0x8089ef11: init_dlci+0x0/0x30() returned 0.
initcall 0x8089ef11 ran for 6 msecs: init_dlci+0x0/0x30()
Calling initcall 0x8089f51d: n2_init+0x0/0xaf5()
initcall 0x8089f51d: n2_init+0x0/0xaf5() returned -22.
initcall 0x8089f51d ran for 0 msecs: n2_init+0x0/0xaf5()
initcall at 0x8089f51d: n2_init+0x0/0xaf5(): returned with error code -22
Calling initcall 0x808a0012: c101_init+0x0/0x5d4()
initcall 0x808a0012: c101_init+0x0/0x5d4() returned -38.
initcall 0x808a0012 ran for 0 msecs: c101_init+0x0/0x5d4()
initcall at 0x808a0012: c101_init+0x0/0x5d4(): returned with error code -38
Calling initcall 0x808a05e6: pegasus_init+0x0/0x153()
pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
usbcore: registered new interface driver pegasus
initcall 0x808a05e6: pegasus_init+0x0/0x153() returned 0.
initcall 0x808a05e6 ran for 9 msecs: pegasus_init+0x0/0x153()
Calling initcall 0x808a0739: usb_rtl8150_init+0x0/0x2b()drivers/net/usb/rtl8150.c: rtl8150 based usb-ethernet driver v0.6.2 (2004/08/27)
usbcore: registered new interface driver rtl8150
initcall 0x808a0739: usb_rtl8150_init+0x0/0x2b() returned 0.
initcall 0x808a0739 ran for 12 msecs: usb_rtl8150_init+0x0/0x2b()
Calling initcall 0x808a0764: ipw2100_init+0x0/0x61()
ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, git-1.2.2
ipw2100: Copyright(c) 2003-2006 Intel Corporation
initcall 0x808a0764: ipw2100_init+0x0/0x61() returned 0.
initcall 0x808a0764 ran for 9 msecs: ipw2100_init+0x0/0x61()
Calling initcall 0x808a07c5: strip_init_driver+0x0/0x5e()
STRIP: Version 1.3A-STUART.CHESHIRE (unlimited channels)
initcall 0x808a07c5: strip_init_driver+0x0/0x5e() returned 0.
initcall 0x808a07c5 ran for 6 msecs: strip_init_driver+0x0/0x5e()
Calling initcall 0x808a0823: airo_init_module+0x0/0xea()airo(): Probing for PCI adaptersairo(): Finished probing for PCI adapters
initcall 0x808a0823: airo_init_module+0x0/0xea() returned 0.
initcall 0x808a0823 ran for 6 msecs: airo_init_module+0x0/0xea()
Calling initcall 0x808a097e: bcm43xx_init+0x0/0x23()
bcm43xx driver
initcall 0x808a097e: bcm43xx_init+0x0/0x23() returned 0.
initcall 0x808a097e ran for 3 msecs: bcm43xx_init+0x0/0x23()
Calling initcall 0x808a0bc9: zd1201_init+0x0/0x11()
usbcore: registered new interface driver zd1201
initcall 0x808a0bc9: zd1201_init+0x0/0x11() returned 0.
initcall 0x808a0bc9 ran for 6 msecs: zd1201_init+0x0/0x11()
Calling initcall 0x8043268b: libertas_init_module+0x0/0x8()
initcall 0x8043268b: libertas_init_module+0x0/0x8() returned 0.
initcall 0x8043268b ran for 0 msecs: libertas_init_module+0x0/0x8()
Calling initcall 0x808a0bda: p54_init+0x0/0x3()
initcall 0x808a0bda: p54_init+0x0/0x3() returned 0.
initcall 0x808a0bda ran for 0 msecs: p54_init+0x0/0x3()
Calling initcall 0x808a10ba: nsc_ircc_init+0x0/0x29b()
pnp: the driver 'nsc-ircc' has been registered
pnp: the driver 'nsc-ircc' has been unregistered
initcall 0x808a10ba: nsc_ircc_init+0x0/0x29b() returned -19.
initcall 0x808a10ba ran for 9 msecs: nsc_ircc_init+0x0/0x29b()
Calling initcall 0x808a1355: ali_ircc_init+0x0/0x7a4()
initcall 0x808a1355: ali_ircc_init+0x0/0x7a4() returned -19.
initcall 0x808a1355 ran for 0 msecs: ali_ircc_init+0x0/0x7a4()
Calling initcall 0x808a20c2: via_ircc_init+0x0/0x5a()
initcall 0x808a20c2: via_ircc_init+0x0/0x5a() returned 0.
initcall 0x808a20c2 ran for 0 msecs: via_ircc_init+0x0/0x5a()
Calling initcall 0x808a2540: kingsun_init+0x0/0x11()
usbcore: registered new interface driver kingsun-sir
initcall 0x808a2540: kingsun_init+0x0/0x11() returned 0.
initcall 0x808a2540 ran for 3 msecs: kingsun_init+0x0/0x11()
Calling initcall 0x808a2551: ksdazzle_init+0x0/0x11()
usbcore: registered new interface driver ksdazzle-sir
initcall 0x808a2551: ksdazzle_init+0x0/0x11() returned 0.
initcall 0x808a2551 ran for 3 msecs: ksdazzle_init+0x0/0x11()
Calling initcall 0x808a2579: init_netconsole+0x0/0x1b6()
console [netcon0] enabled
netconsole: network logging started
initcall 0x808a2579: init_netconsole+0x0/0x1b6() returned 0.
initcall 0x808a2579 ran for 4647 msecs: init_netconsole+0x0/0x1b6()
Calling initcall 0x808a272f: videodev_init+0x0/0x72()
Linux video capture interface: v2.00
initcall 0x808a272f: videodev_init+0x0/0x72() returned 0.
initcall 0x808a272f ran for 3 msecs: videodev_init+0x0/0x72()
Calling initcall 0x808a27a1: sn9c102_module_init+0x0/0x4c()
sn9c102: V4L2 driver for SN9C1xx PC Camera Controllers v1:1.47
usbcore: registered new interface driver sn9c102
initcall 0x808a27a1: sn9c102_module_init+0x0/0x4c() returned 0.
initcall 0x808a27a1 ran for 9 msecs: sn9c102_module_init+0x0/0x4c()
Calling initcall 0x808a27ed: terratec_init+0x0/0xc9()
videodev: "TerraTec ActiveRadio" has no release callback. Please fix your driver for proper sysfs support, see http://lwn.net/Articles/36850/
TERRATEC ActivRadio Standalone card driver.
initcall 0x808a27ed: terratec_init+0x0/0xc9() returned 0.
initcall 0x808a27ed ran for 15 msecs: terratec_init+0x0/0xc9()
Calling initcall 0x808a28b6: gemtek_init+0x0/0x20e()
GemTek Radio card driver: v0.0.3
Automatic device probing enabled.
Trying I/O port 0x20c...
Trying I/O port 0x30c...
Trying I/O port 0x24c...
Trying I/O port 0x34c...
Trying I/O port 0x248...
Trying I/O port 0x28c...
Automatic probing failed!
Card at I/O port 0x34c does not respond properly, check your configuration.
videodev: "GemTek Radio card" has no release callback. Please fix your driver for proper sysfs support, see http://lwn.net/Articles/36850/
initcall 0x808a28b6: gemtek_init+0x0/0x20e() returned 0.
initcall 0x808a28b6 ran for 38 msecs: gemtek_init+0x0/0x20e()
Calling initcall 0x808a2ac4: trust_init+0x0/0x172()
videodev: "Trust FM Radio" has no release callback. Please fix your driver for proper sysfs support, see http://lwn.net/Articles/36850/
Trust FM Radio card driver v1.0.
initcall 0x808a2ac4: trust_init+0x0/0x172() returned 0.
initcall 0x808a2ac4 ran for 15 msecs: trust_init+0x0/0x172()
Calling initcall 0x808a42bd: ia_module_init+0x0/0x56()
initcall 0x808a42bd: ia_module_init+0x0/0x56() returned 0.
initcall 0x808a42bd ran for 0 msecs: ia_module_init+0x0/0x56()
Calling initcall 0x808a51ba: eni_init+0x0/0x11()
initcall 0x808a51ba: eni_init+0x0/0x11() returned 0.
initcall 0x808a51ba ran for 0 msecs: eni_init+0x0/0x11()
Calling initcall 0x808a57ad: firestream_init_module+0x0/0x11()
initcall 0x808a57ad: firestream_init_module+0x0/0x11() returned 0.
initcall 0x808a57ad ran for 0 msecs: firestream_init_module+0x0/0x11()
Calling initcall 0x808a5f21: lanai_module_init+0x0/0x2c()
initcall 0x808a5f21: lanai_module_init+0x0/0x2c() returned 0.
initcall 0x808a5f21 ran for 0 msecs: lanai_module_init+0x0/0x2c()
Calling initcall 0x808a5f4d: mac_hid_init+0x0/0x72()
input: Macintosh mouse button emulation as /class/input/input0
initcall 0x808a5f4d: mac_hid_init+0x0/0x72() returned 0.
initcall 0x808a5f4d ran for 3 msecs: mac_hid_init+0x0/0x72()
Calling initcall 0x808a6242: raid_init+0x0/0xa()
initcall 0x808a6242: raid_init+0x0/0xa() returned 0.
initcall 0x808a6242 ran for 0 msecs: raid_init+0x0/0xa()
Calling initcall 0x808a624c: spi_transport_init+0x0/0x23()
initcall 0x808a624c: spi_transport_init+0x0/0x23() returned 0.
initcall 0x808a624c ran for 0 msecs: spi_transport_init+0x0/0x23()
Calling initcall 0x808a626f: iscsi_transport_init+0x0/0xce()
Loading iSCSI transport class v2.0-724.
initcall 0x808a626f: iscsi_transport_init+0x0/0xce() returned 0.
initcall 0x808a626f ran for 3 msecs: iscsi_transport_init+0x0/0xce()
Calling initcall 0x808a633d: sas_transport_init+0x0/0x9b()
initcall 0x808a633d: sas_transport_init+0x0/0x9b() returned 0.
initcall 0x808a633d ran for 0 msecs: sas_transport_init+0x0/0x9b()
Calling initcall 0x808a63d8: sas_class_init+0x0/0x33()
initcall 0x808a63d8: sas_class_init+0x0/0x33() returned 0.
initcall 0x808a63d8 ran for 0 msecs: sas_class_init+0x0/0x33()
Calling initcall 0x808a640b: NCR_700_init+0x0/0x18()
initcall 0x808a640b: NCR_700_init+0x0/0x18() returned 0.
initcall 0x808a640b ran for 0 msecs: NCR_700_init+0x0/0x18()
Calling initcall 0x808a64da: sim710_init+0x0/0xd()
initcall 0x808a64da: sim710_init+0x0/0xd() returned 0.
initcall 0x808a64da ran for 0 msecs: sim710_init+0x0/0xd()
Calling initcall 0x808a7b82: BusLogic_init+0x0/0x11fe()
initcall 0x808a7b82: BusLogic_init+0x0/0x11fe() returned 0.
initcall 0x808a7b82 ran for 0 msecs: BusLogic_init+0x0/0x11fe()
Calling initcall 0x808a8f89: init_this_scsi_driver+0x0/0xcc()
Invalid address for shpnt with 1542.
initcall 0x808a8f89: init_this_scsi_driver+0x0/0xcc() returned -19.
initcall 0x808a8f89 ran for 3200 msecs: init_this_scsi_driver+0x0/0xcc()
Calling initcall 0x808a97b4: aac_init+0x0/0x66()
Adaptec aacraid driver 1.1-5[2449]-ms
initcall 0x808a97b4: aac_init+0x0/0x66() returned 0.
initcall 0x808a97b4 ran for 3 msecs: aac_init+0x0/0x66()
Calling initcall 0x808a9c1b: init_this_scsi_driver+0x0/0xcc()
initcall 0x808a9c1b: init_this_scsi_driver+0x0/0xcc() returned -19.
initcall 0x808a9c1b ran for 0 msecs: init_this_scsi_driver+0x0/0xcc()
Calling initcall 0x808a9e43: init_this_scsi_driver+0x0/0xcc()
initcall 0x808a9e43: init_this_scsi_driver+0x0/0xcc() returned -19.
initcall 0x808a9e43 ran for 0 msecs: init_this_scsi_driver+0x0/0xcc()
Calling initcall 0x808aa817: init_this_scsi_driver+0x0/0xcc()
NCR53c406a: no available ports found
initcall 0x808aa817: init_this_scsi_driver+0x0/0xcc() returned -19.
initcall 0x808aa817 ran for 3 msecs: init_this_scsi_driver+0x0/0xcc()
Calling initcall 0x808aaf08: init_this_scsi_driver+0x0/0xcc()sym53c416.c: Version 1.0.0-ac
initcall 0x808aaf08: init_this_scsi_driver+0x0/0xcc() returned -19.
initcall 0x808aaf08 ran for 3 msecs: init_this_scsi_driver+0x0/0xcc()
Calling initcall 0x808aafd4: qla4xxx_module_init+0x0/0xc6()
iscsi: registered transport (qla4xxx)
QLogic iSCSI HBA Driver
initcall 0x808aafd4: qla4xxx_module_init+0x0/0xc6() returned 0.
initcall 0x808aafd4 ran for 3 msecs: qla4xxx_module_init+0x0/0xc6()
Calling initcall 0x808ab94b: init_this_scsi_driver+0x0/0xcc()
initcall 0x808ab94b: init_this_scsi_driver+0x0/0xcc() returned -19.
initcall 0x808ab94b ran for 0 msecs: init_this_scsi_driver+0x0/0xcc()
Calling initcall 0x808ac047: init_this_scsi_driver+0x0/0xcc()
initcall 0x808ac047: init_this_scsi_driver+0x0/0xcc() returned -19.
initcall 0x808ac047 ran for 0 msecs: init_this_scsi_driver+0x0/0xcc()
Calling initcall 0x808ac7e4: dc395x_module_init+0x0/0x11()
initcall 0x808ac7e4: dc395x_module_init+0x0/0x11() returned 0.
initcall 0x808ac7e4 ran for 0 msecs: dc395x_module_init+0x0/0x11()
Calling initcall 0x808ad119: megasas_init+0x0/0xfb()
megasas: 00.00.03.10-rc5 Thu May 17 10:09:32 PDT 2007
initcall 0x808ad119: megasas_init+0x0/0xfb() returned 0.
initcall 0x808ad119 ran for 3 msecs: megasas_init+0x0/0xfb()
Calling initcall 0x808ae076: hptiop_module_init+0x0/0x33()
RocketRAID 3xxx SATA Controller driver v1.0 (060426)
initcall 0x808ae076: hptiop_module_init+0x0/0x33() returned 0.
initcall 0x808ae076 ran for 3 msecs: hptiop_module_init+0x0/0x33()
Calling initcall 0x808ae766: init_st+0x0/0x155()
st: Version 20070203, fixed bufsize 32768, s/g segs 256
initcall 0x808ae766: init_st+0x0/0x155() returned 0.
initcall 0x808ae766 ran for 3 msecs: init_st+0x0/0x155()
Calling initcall 0x808ae8bb: init_sd+0x0/0xad()
initcall 0x808ae8bb: init_sd+0x0/0xad() returned 0.
initcall 0x808ae8bb ran for 0 msecs: init_sd+0x0/0xad()
Calling initcall 0x808ae968: init_sr+0x0/0x39()
initcall 0x808ae968: init_sr+0x0/0x39() returned 0.
initcall 0x808ae968 ran for 0 msecs: init_sr+0x0/0x39()
Calling initcall 0x808ae9a1: init_ch_module+0x0/0x8d()
SCSI Media Changer driver v0.25
initcall 0x808ae9a1: init_ch_module+0x0/0x8d() returned 0.
initcall 0x808ae9a1 ran for 3 msecs: init_ch_module+0x0/0x8d()
Calling initcall 0x808aea99: ahci_init+0x0/0x11()
initcall 0x808aea99: ahci_init+0x0/0x11() returned 0.
initcall 0x808aea99 ran for 0 msecs: ahci_init+0x0/0x11()
Calling initcall 0x808aeaaa: k2_sata_init+0x0/0x11()
initcall 0x808aeaaa: k2_sata_init+0x0/0x11() returned 0.
initcall 0x808aeaaa ran for 0 msecs: k2_sata_init+0x0/0x11()
Calling initcall 0x808aeabb: piix_init+0x0/0x20()
initcall 0x808aeabb: piix_init+0x0/0x20() returned 0.
initcall 0x808aeabb ran for 0 msecs: piix_init+0x0/0x20()
Calling initcall 0x808aeadb: svia_init+0x0/0x11()
initcall 0x808aeadb: svia_init+0x0/0x11() returned 0.
initcall 0x808aeadb ran for 0 msecs: svia_init+0x0/0x11()
Calling initcall 0x808aeaec: nv_init+0x0/0x11()
initcall 0x808aeaec: nv_init+0x0/0x11() returned 0.
initcall 0x808aeaec ran for 0 msecs: nv_init+0x0/0x11()
Calling initcall 0x808aeafd: mv_init+0x0/0x11()
initcall 0x808aeafd: mv_init+0x0/0x11() returned 0.
initcall 0x808aeafd ran for 0 msecs: mv_init+0x0/0x11()
Calling initcall 0x808aeb0e: inic_init+0x0/0x11()
initcall 0x808aeb0e: inic_init+0x0/0x11() returned 0.
initcall 0x808aeb0e ran for 0 msecs: inic_init+0x0/0x11()
Calling initcall 0x808aeb1f: adma_ata_init+0x0/0x11()
initcall 0x808aeb1f: adma_ata_init+0x0/0x11() returned 0.
initcall 0x808aeb1f ran for 0 msecs: adma_ata_init+0x0/0x11()
Calling initcall 0x808aeb30: amd_init+0x0/0x11()pata_amd 0000:00:06.0: version 0.3.9
PCI: Setting latency timer of device 0000:00:06.0 to 64
scsi2 : pata_amd
scsi3 : pata_amd
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
ata1.00: ATA-5: MAXTOR 6L040J2, AR1.0500, max UDMA/133
ata1.00: 78177792 sectors, multi 1: LBA
ata1.01: ATA-6: ST380011A, 3.06, max UDMA/100
ata1.01: 156301488 sectors, multi 1: LBA48
ata1.00: configured for UDMA/133
ata1.01: configured for UDMA/100
scsi 2:0:0:0: Direct-Access ATA MAXTOR 6L040J2 AR1. PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 78177792 512-byte hardware sectors (40027 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sda] 78177792 512-byte hardware sectors (40027 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 < sda5 >
sd 2:0:0:0: [sda] Attached SCSI disk
scsi 2:0:1:0: Direct-Access ATA ST380011A 3.06 PQ: 0 ANSI: 5
sd 2:0:1:0: [sdb] 156301488 512-byte hardware sectors (80026 MB)
sd 2:0:1:0: [sdb] Write Protect is off
sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:1:0: [sdb] 156301488 512-byte hardware sectors (80026 MB)
sd 2:0:1:0: [sdb] Write Protect is off
sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2 sdb3 < sdb5 >
sd 2:0:1:0: [sdb] Attached SCSI disk
initcall 0x808aeb30: amd_init+0x0/0x11() returned 0.
initcall 0x808aeb30 ran for 607 msecs: amd_init+0x0/0x11()
Calling initcall 0x808aeb41: artop_init+0x0/0x11()
initcall 0x808aeb41: artop_init+0x0/0x11() returned 0.
initcall 0x808aeb41 ran for 0 msecs: artop_init+0x0/0x11()
Calling initcall 0x808aeb52: hpt36x_init+0x0/0x11()
initcall 0x808aeb52: hpt36x_init+0x0/0x11() returned 0.
initcall 0x808aeb52 ran for 0 msecs: hpt36x_init+0x0/0x11()
Calling initcall 0x808aeb63: jmicron_init+0x0/0x11()
initcall 0x808aeb63: jmicron_init+0x0/0x11() returned 0.
initcall 0x808aeb63 ran for 0 msecs: jmicron_init+0x0/0x11()
Calling initcall 0x808aeb74: netcell_init+0x0/0x11()
initcall 0x808aeb74: netcell_init+0x0/0x11() returned 0.
initcall 0x808aeb74 ran for 0 msecs: netcell_init+0x0/0x11()
Calling initcall 0x808aeb85: ns87415_init+0x0/0x11()
initcall 0x808aeb85: ns87415_init+0x0/0x11() returned 0.
initcall 0x808aeb85 ran for 0 msecs: ns87415_init+0x0/0x11()
Calling initcall 0x808aeb96: oldpiix_init+0x0/0x11()
initcall 0x808aeb96: oldpiix_init+0x0/0x11() returned 0.
initcall 0x808aeb96 ran for 0 msecs: oldpiix_init+0x0/0x11()
Calling initcall 0x808aef1d: pdc2027x_init+0x0/0x11()
initcall 0x808aef1d: pdc2027x_init+0x0/0x11() returned 0.
initcall 0x808aef1d ran for 0 msecs: pdc2027x_init+0x0/0x11()
Calling initcall 0x808af0da: qdi_init+0x0/0x19d()
initcall 0x808af0da: qdi_init+0x0/0x19d() returned -19.
initcall 0x808af0da ran for 0 msecs: qdi_init+0x0/0x19d()
Calling initcall 0x808af277: serverworks_init+0x0/0x11()
initcall 0x808af277: serverworks_init+0x0/0x11() returned 0.
initcall 0x808af277 ran for 0 msecs: serverworks_init+0x0/0x11()
Calling initcall 0x808af288: sl82c105_init+0x0/0x11()
initcall 0x808af288: sl82c105_init+0x0/0x11() returned 0.
initcall 0x808af288 ran for 0 msecs: sl82c105_init+0x0/0x11()
Calling initcall 0x808af299: triflex_init+0x0/0x11()
initcall 0x808af299: triflex_init+0x0/0x11() returned 0.
initcall 0x808af299 ran for 0 msecs: triflex_init+0x0/0x11()
Calling initcall 0x808af2aa: pata_platform_init+0x0/0xa()
initcall 0x808af2aa: pata_platform_init+0x0/0xa() returned 0.
initcall 0x808af2aa ran for 0 msecs: pata_platform_init+0x0/0xa()
Calling initcall 0x808af534: ata_generic_init+0x0/0x11()
initcall 0x808af534: ata_generic_init+0x0/0x11() returned 0.
initcall 0x808af534 ran for 0 msecs: ata_generic_init+0x0/0x11()
Calling initcall 0x808af545: fusion_init+0x0/0xdc()
Fusion MPT base driver 3.04.05
Copyright (c) 1999-2007 LSI Logic Corporation
initcall 0x808af545: fusion_init+0x0/0xdc() returned 0.
initcall 0x808af545 ran for 6 msecs: fusion_init+0x0/0xdc()
Calling initcall 0x808af621: mptspi_init+0x0/0xba()
Fusion MPT SPI Host driver 3.04.05
initcall 0x808af621: mptspi_init+0x0/0xba() returned 0.
initcall 0x808af621 ran for 3 msecs: mptspi_init+0x0/0xba()
Calling initcall 0x808af6db: uio_init+0x0/0x3()
initcall 0x808af6db: uio_init+0x0/0x3() returned 0.
initcall 0x808af6db ran for 0 msecs: uio_init+0x0/0x3()
Calling initcall 0x808af6de: cdrom_init+0x0/0x8()
initcall 0x808af6de: cdrom_init+0x0/0x8() returned 0.
initcall 0x808af6de ran for 0 msecs: cdrom_init+0x0/0x8()
Calling initcall 0x808af7c5: at25_init+0x0/0xa()
initcall 0x808af7c5: at25_init+0x0/0xa() returned 0.
initcall 0x808af7c5 ran for 0 msecs: at25_init+0x0/0xa()
Calling initcall 0x808af8f3: aoe_init+0x0/0x9c()
aoe: AoE v32 initialised.
initcall 0x808af8f3: aoe_init+0x0/0x9c() returned 0.
initcall 0x808af8f3 ran for 3 msecs: aoe_init+0x0/0x9c()
Calling initcall 0x808afecb: ehci_hcd_init+0x0/0x11()
PCI: No IRQ known for interrupt pin B of device 0000:00:02.1. Probably buggy MP table.ehci_hcd 0000:00:02.1: Found HC with no IRQ. Check BIOS/PCI 0000:00:02.1 setup!ehci_hcd 0000:00:02.1: init 0000:00:02.1 fail, -19
initcall 0x808afecb: ehci_hcd_init+0x0/0x11() returned 0.
initcall 0x808afecb ran for 9 msecs: ehci_hcd_init+0x0/0x11()
Calling initcall 0x808afedc: ohci_hcd_mod_init+0x0/0x3c()ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
PCI: No IRQ known for interrupt pin A of device 0000:00:02.0. Probably buggy MP table.ohci_hcd 0000:00:02.0: Found HC with no IRQ. Check BIOS/PCI 0000:00:02.0 setup!ohci_hcd 0000:00:02.0: init 0000:00:02.0 fail, -19
initcall 0x808afedc: ohci_hcd_mod_init+0x0/0x3c() returned 0.
initcall 0x808afedc ran for 12 msecs: ohci_hcd_mod_init+0x0/0x3c()
Calling initcall 0x808aff64: uhci_hcd_init+0x0/0x9b()
USB Universal Host Controller Interface driver v3.0
initcall 0x808aff64: uhci_hcd_init+0x0/0x9b() returned 0.
initcall 0x808aff64 ran for 3 msecs: uhci_hcd_init+0x0/0x9b()
Calling initcall 0x808affff: sl811h_init+0x0/0x3e()
sl811: driver sl811-hcd, 19 May 2005
initcall 0x808affff: sl811h_init+0x0/0x3e() returned 0.
initcall 0x808affff ran for 3 msecs: sl811h_init+0x0/0x3e()
Calling initcall 0x808b0241: acm_init+0x0/0xd9()
usbcore: registered new interface driver cdc_acmdrivers/usb/class/cdc-acm.c: v0.25:USB Abstract Control Model driver for USB modems and ISDN adapters
initcall 0x808b0241: acm_init+0x0/0xd9() returned 0.
initcall 0x808b0241 ran for 6 msecs: acm_init+0x0/0xd9()
Calling initcall 0x808b031a: usb_stor_init+0x0/0x42()
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
initcall 0x808b031a: usb_stor_init+0x0/0x42() returned 0.
initcall 0x808b031a ran for 9 msecs: usb_stor_init+0x0/0x42()
Calling initcall 0x808b035c: usb_usual_init+0x0/0x2a()
usbcore: registered new interface driver libusual
initcall 0x808b035c: usb_usual_init+0x0/0x2a() returned 0.
initcall 0x808b035c ran for 3 msecs: usb_usual_init+0x0/0x2a()
Calling initcall 0x808b0386: usb_serial_init+0x0/0x1f0()
usbcore: registered new interface driver usbserialdrivers/usb/serial/usb-serial.c: USB Serial Driver core
initcall 0x808b0386: usb_serial_init+0x0/0x1f0() returned 0.
initcall 0x808b0386 ran for 6 msecs: usb_serial_init+0x0/0x1f0()
Calling initcall 0x808b0576: airprime_init+0x0/0x4e()drivers/usb/serial/usb-serial.c: USB Serial support registered for airprime
usbcore: registered new interface driver airprime
initcall 0x808b0576: airprime_init+0x0/0x4e() returned 0.
initcall 0x808b0576 ran for 6 msecs: airprime_init+0x0/0x4e()
Calling initcall 0x808b05c4: ark3116_init+0x0/0x36()drivers/usb/serial/usb-serial.c: USB Serial support registered for ark3116
usbcore: registered new interface driver ark3116
initcall 0x808b05c4: ark3116_init+0x0/0x36() returned 0.
initcall 0x808b05c4 ran for 6 msecs: ark3116_init+0x0/0x36()
Calling initcall 0x808b05fa: belkin_sa_init+0x0/0x51()drivers/usb/serial/usb-serial.c: USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter
usbcore: registered new interface driver belkindrivers/usb/serial/belkin_sa.c: USB Belkin Serial converter driver v1.2
initcall 0x808b05fa: belkin_sa_init+0x0/0x51() returned 0.
initcall 0x808b05fa ran for 9 msecs: belkin_sa_init+0x0/0x51()
Calling initcall 0x808b064b: ch341_init+0x0/0x36()drivers/usb/serial/usb-serial.c: USB Serial support registered for ch341-uart
usbcore: registered new interface driver ch341
initcall 0x808b064b: ch341_init+0x0/0x36() returned 0.
initcall 0x808b064b ran for 6 msecs: ch341_init+0x0/0x36()
Calling initcall 0x808b0681: cyberjack_init+0x0/0x65()drivers/usb/serial/usb-serial.c: USB Serial support registered for Reiner SCT Cyberjack USB card reader
usbcore: registered new interface driver cyberjackdrivers/usb/serial/cyberjack.c: v1.01 Matthias Bruestledrivers/usb/serial/cyberjack.c: REINER SCT cyberJack pinpad/e-com USB Chipcard Reader Driver
initcall 0x808b0681: cyberjack_init+0x0/0x65() returned 0.
initcall 0x808b0681 ran for 12 msecs: cyberjack_init+0x0/0x65()
Calling initcall 0x808b06e6: debug_init+0x0/0x36()drivers/usb/serial/usb-serial.c: USB Serial support registered for debug
usbcore: registered new interface driver debug
initcall 0x808b06e6: debug_init+0x0/0x36() returned 0.
initcall 0x808b06e6 ran for 6 msecs: debug_init+0x0/0x36()
Calling initcall 0x808b071c: ipaq_init+0x0/0x80()drivers/usb/serial/usb-serial.c: USB Serial support registered for PocketPC PDAdrivers/usb/serial/ipaq.c: USB PocketPC PDA driver v0.5
usbcore: registered new interface driver ipaq
initcall 0x808b071c: ipaq_init+0x0/0x80() returned 0.
initcall 0x808b071c ran for 9 msecs: ipaq_init+0x0/0x80()
Calling initcall 0x80506c4c: usb_ipw_init+0x0/0x51()<4>Clocksource tsc unstable (delta = 83463808 ns)
drivers/usb/serial/usb-serial.c: USB Serial support registered for IPWireless converter
usbcore: registered new interface driver ipwttydrivers/usb/serial/ipw.c: IPWireless tty driver v0.3
initcall 0x80506c4c: usb_ipw_init+0x0/0x51() returned 0.
initcall 0x80506c4c ran for 9 msecs: usb_ipw_init+0x0/0x51()
Calling initcall 0x808b079c: kobil_init+0x0/0x65() drivers/usb/serial/usb-serial.c: USB Serial support registered for KOBIL USB smart card terminal
usbcore: registered new interface driver kobildrivers/usb/serial/kobil_sct.c: 21/05/2004 KOBIL Systems GmbH - http://www.kobil.comdrivers/usb/serial/kobil_sct.c: KOBIL USB Smart Card Terminal Driver (experimental) initcall 0x808b079c: kobil_init+0x0/0x65() returned 0.
initcall 0x808b079c ran for 12 msecs: kobil_init+0x0/0x65()
Calling initcall 0x808b0801: mct_u232_init+0x0/0x51() drivers/usb/serial/usb-serial.c: USB Serial support registered for MCT U232
usbcore: registered new interface driver mct_u232drivers/usb/serial/mct_u232.c: Magic Control Technology USB-RS232 converter driver z2.1 initcall 0x808b0801: mct_u232_init+0x0/0x51() returned 0.
initcall 0x808b0801 ran for 9 msecs: mct_u232_init+0x0/0x51()
Calling initcall 0x808b0852: moschip7720_init+0x0/0x75() drivers/usb/serial/usb-serial.c: USB Serial support registered for Moschip 2 port adapter drivers/usb/serial/mos7720.c: Moschip USB Serial Driver 1.0.0.4F
usbcore: registered new interface driver moschip7720
initcall 0x808b0852: moschip7720_init+0x0/0x75() returned 0.
initcall 0x808b0852 ran for 12 msecs: moschip7720_init+0x0/0x75()
Calling initcall 0x808b08c7: navman_init+0x0/0x36() drivers/usb/serial/usb-serial.c: USB Serial support registered for navman
usbcore: registered new interface driver navman
initcall 0x808b08c7: navman_init+0x0/0x36() returned 0.
initcall 0x808b08c7 ran for 6 msecs: navman_init+0x0/0x36()
Calling initcall 0x808b08fd: omninet_init+0x0/0x51() drivers/usb/serial/usb-serial.c: USB Serial support registered for ZyXEL - omni.net lcd plus usb
usbcore: registered new interface driver omninetdrivers/usb/serial/omninet.c: v1.1:USB ZyXEL omni.net LCD PLUS Driver
initcall 0x808b08fd: omninet_init+0x0/0x51() returned 0.
initcall 0x808b08fd ran for 9 msecs: omninet_init+0x0/0x51()
Calling initcall 0x808b094e: option_init+0x0/0x51() drivers/usb/serial/usb-serial.c: USB Serial support registered for GSM modem (1-port)
usbcore: registered new interface driver optiondrivers/usb/serial/option.c: USB Driver for GSM modems: v0.7.1
initcall 0x808b094e: option_init+0x0/0x51() returned 0.
initcall 0x808b094e ran for 9 msecs: option_init+0x0/0x51()
Calling initcall 0x808b099f: oti6858_init+0x0/0x36() drivers/usb/serial/usb-serial.c: USB Serial support registered for oti6858
usbcore: registered new interface driver oti6858
initcall 0x808b099f: oti6858_init+0x0/0x36() returned 0.
initcall 0x808b099f ran for 6 msecs: oti6858_init+0x0/0x36()
Calling initcall 0x808b09d5: safe_init+0x0/0x11e() drivers/usb/serial/safe_serial.c: v0.0b [email protected], [email protected] drivers/usb/serial/safe_serial.c: USB Safe Encapsulated Serial drivers/usb/serial/safe_serial.c: vendor: 0 product: 0 safe: 1 padded: 0
drivers/usb/serial/usb-serial.c: USB Serial support registered for safe_serial
usbcore: registered new interface driver safe_serial
initcall 0x808b09d5: safe_init+0x0/0x11e() returned 0.
initcall 0x808b09d5 ran for 15 msecs: safe_init+0x0/0x11e()
Calling initcall 0x808b0af3: whiteheat_init+0x0/0x6b()drivers/usb/serial/usb-serial.c: USB Serial support registered for Connect Tech - WhiteHEAT - (prerenumeration) drivers/usb/serial/usb-serial.c: USB Serial support registered for Connect Tech - WhiteHEAT
usbcore: registered new interface driver whiteheatdrivers/usb/serial/whiteheat.c: USB ConnectTech WhiteHEAT driver v2.0
initcall 0x808b0af3: whiteheat_init+0x0/0x6b() returned 0.
initcall 0x808b0af3 ran for 12 msecs: whiteheat_init+0x0/0x6b()
Calling initcall 0x808b0b5e: adu_init+0x0/0xa2()
usbcore: registered new interface driver adutuxdrivers/usb/misc/adutux.c: adutux adutux (see www.ontrak.net) v0.0.13 drivers/usb/misc/adutux.c: adutux is an experimental driver. Use at your own risk
initcall 0x808b0b5e: adu_init+0x0/0xa2() returned 0.
initcall 0x808b0b5e ran for 9 msecs: adu_init+0x0/0xa2()
Calling initcall 0x808b0c00: auerswald_init+0x0/0x36()
usbcore: registered new interface driver auerswald
initcall 0x808b0c00: auerswald_init+0x0/0x36() returned 0.
initcall 0x808b0c00 ran for 3 msecs: auerswald_init+0x0/0x36()
Calling initcall 0x808b0c36: berry_init+0x0/0x11()
usbcore: registered new interface driver berry_charge
initcall 0x808b0c36: berry_init+0x0/0x11() returned 0.
initcall 0x808b0c36 ran for 3 msecs: berry_init+0x0/0x11()
Calling initcall 0x808b0c47: cypress_init+0x0/0x3a()
usbcore: registered new interface driver cypress_cy7c63
initcall 0x808b0c47: cypress_init+0x0/0x3a() returned 0.
initcall 0x808b0c47 ran for 3 msecs: cypress_init+0x0/0x3a()
Calling initcall 0x808b0c81: usb_cytherm_init+0x0/0x50()
usbcore: registered new interface driver cythermdrivers/usb/misc/cytherm.c: v1.0:Cypress USB Thermometer driver
initcall 0x808b0c81: usb_cytherm_init+0x0/0x50() returned 0.
initcall 0x808b0c81 ran for 6 msecs: usb_cytherm_init+0x0/0x50()
Calling initcall 0x808b0cd1: iowarrior_init+0x0/0x11()
usbcore: registered new interface driver iowarrior
initcall 0x808b0cd1: iowarrior_init+0x0/0x11() returned 0.
initcall 0x808b0cd1 ran for 3 msecs: iowarrior_init+0x0/0x11()
Calling initcall 0x808b0ce2: usb_lcd_init+0x0/0x3a()
usbcore: registered new interface driver usblcd
initcall 0x808b0ce2: usb_lcd_init+0x0/0x3a() returned 0.
initcall 0x808b0ce2 ran for 3 msecs: usb_lcd_init+0x0/0x3a()
Calling initcall 0x808b0d1c: ld_usb_init+0x0/0x3a()
usbcore: registered new interface driver ldusb
initcall 0x808b0d1c: ld_usb_init+0x0/0x3a() returned 0.
initcall 0x808b0d1c ran for 3 msecs: ld_usb_init+0x0/0x3a()
Calling initcall 0x808b0d56: tv_init+0x0/0x50()
usbcore: registered new interface driver trancevibratordrivers/usb/misc/trancevibrator.c: v1.1:PlayStation 2 Trance Vibrator driver
initcall 0x808b0d56: tv_init+0x0/0x50() returned 0.
initcall 0x808b0d56 ran for 6 msecs: tv_init+0x0/0x50()
Calling initcall 0x808b0da6: uea_init+0x0/0x24()
[ueagle-atm] driver ueagle 1.4 loaded
usbcore: registered new interface driver ueagle-atm
initcall 0x808b0da6: uea_init+0x0/0x24() returned 0.
initcall 0x808b0da6 ran for 6 msecs: uea_init+0x0/0x24()
Calling initcall 0x808b0dca: usbatm_usb_init+0x0/0x3c()
initcall 0x808b0dca: usbatm_usb_init+0x0/0x3c() returned 0.
initcall 0x808b0dca ran for 0 msecs: usbatm_usb_init+0x0/0x3c()
Calling initcall 0x808b0e06: xusbatm_init+0x0/0x123()drivers/usb/atm/xusbatm.c: malformed module parameters
initcall 0x808b0e06: xusbatm_init+0x0/0x123() returned -22.
initcall 0x808b0e06 ran for 3 msecs: xusbatm_init+0x0/0x123()
initcall at 0x808b0e06: xusbatm_init+0x0/0x123(): returned with error code -22
Calling initcall 0x808b16b3: i8042_init+0x0/0x35f()
pnp: the driver 'i8042 kbd' has been registered
pnp: the driver 'i8042 aux' has been registered
pnp: the driver 'i8042 kbd' has been unregistered
pnp: the driver 'i8042 aux' has been unregistered
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
initcall 0x808b16b3: i8042_init+0x0/0x35f() returned 0.
initcall 0x808b16b3 ran for 25 msecs: i8042_init+0x0/0x35f()
Calling initcall 0x808b1a12: pcips2_init+0x0/0x11()
initcall 0x808b1a12: pcips2_init+0x0/0x11() returned 0.
initcall 0x808b1a12 ran for 0 msecs: pcips2_init+0x0/0x11()
Calling initcall 0x808b1ba4: l4_init+0x0/0x245()
initcall 0x808b1ba4: l4_init+0x0/0x245() returned -19.
initcall 0x808b1ba4 ran for 0 msecs: l4_init+0x0/0x245()
Calling initcall 0x808b1ee2: mousedev_init+0x0/0x50()
mice: PS/2 mouse device common for all mice
initcall 0x808b1ee2: mousedev_init+0x0/0x50() returned 0.
initcall 0x808b1ee2 ran for 3 msecs: mousedev_init+0x0/0x50()
Calling initcall 0x808b1f32: joydev_init+0x0/0xa()
initcall 0x808b1f32: joydev_init+0x0/0xa() returned 0.
initcall 0x808b1f32 ran for 0 msecs: joydev_init+0x0/0xa()
Calling initcall 0x808b1f3c: tsdev_init+0x0/0xa()
initcall 0x808b1f3c: tsdev_init+0x0/0xa() returned 0.
initcall 0x808b1f3c ran for 0 msecs: tsdev_init+0x0/0xa()
Calling initcall 0x808b1f46: atkbd_init+0x0/0x11()
initcall 0x808b1f46: atkbd_init+0x0/0x11() returned 0.
initcall 0x808b1f46 ran for 0 msecs: atkbd_init+0x0/0x11()
Calling initcall 0x808b1f57: logibm_init+0x0/0x12e()logibm.c: Didn't find Logitech busmouse at 0x23c
initcall 0x808b1f57: logibm_init+0x0/0x12e()<6>input: AT Translated Set 2 keyboard as /class/input/input1
returned -19.
initcall 0x808b1f57 ran for 3 msecs: logibm_init+0x0/0x12e()
Calling initcall 0x808b2085: pc110pad_init+0x0/0x173()
initcall 0x808b2085: pc110pad_init+0x0/0x173() returned -19.
initcall 0x808b2085 ran for 0 msecs: pc110pad_init+0x0/0x173()
Calling initcall 0x808b21f8: sermouse_init+0x0/0x11()
initcall 0x808b21f8: sermouse_init+0x0/0x11() returned 0.
initcall 0x808b21f8 ran for 0 msecs: sermouse_init+0x0/0x11()
Calling initcall 0x808b2209: adi_init+0x0/0xf()
initcall 0x808b2209: adi_init+0x0/0xf() returned 0.
initcall 0x808b2209 ran for 0 msecs: adi_init+0x0/0xf()
Calling initcall 0x808b2218: analog_init+0x0/0xce()
initcall 0x808b2218: analog_init+0x0/0xce() returned 0.
initcall 0x808b2218 ran for 0 msecs: analog_init+0x0/0xce()
Calling initcall 0x808b22e6: sw_init+0x0/0xf()
initcall 0x808b22e6: sw_init+0x0/0xf() returned 0.
initcall 0x808b22e6 ran for 0 msecs: sw_init+0x0/0xf()
Calling initcall 0x808b22f5: spaceball_init+0x0/0x11()
initcall 0x808b22f5: spaceball_init+0x0/0x11() returned 0.
initcall 0x808b22f5 ran for 0 msecs: spaceball_init+0x0/0x11()
Calling initcall 0x808b2306: stinger_init+0x0/0x11()
initcall 0x808b2306: stinger_init+0x0/0x11() returned 0.
initcall 0x808b2306 ran for 0 msecs: stinger_init+0x0/0x11()
Calling initcall 0x808b2317: tmdc_init+0x0/0xf()
initcall 0x808b2317: tmdc_init+0x0/0xf() returned 0.
initcall 0x808b2317 ran for 0 msecs: tmdc_init+0x0/0xf()
Calling initcall 0x808b2326: iforce_init+0x0/0x11()
initcall 0x808b2326: iforce_init+0x0/0x11() returned 0.
initcall 0x808b2326 ran for 0 msecs: iforce_init+0x0/0x11()
Calling initcall 0x808b236a: abituguru_init+0x0/0x159()
initcall 0x808b236a: abituguru_init+0x0/0x159() returned -19.
initcall 0x808b236a ran for 0 msecs: abituguru_init+0x0/0x159()
Calling initcall 0x808b3159: f71805f_init+0x0/0x12a()
initcall 0x808b3159: f71805f_init+0x0/0x12a() returned -19.
initcall 0x808b3159 ran for 0 msecs: f71805f_init+0x0/0x12a()
Calling initcall 0x808b3619: hdaps_init+0x0/0x1ea()
hdaps: supported laptop not found!
hdaps: driver init failed (ret=-19)!
initcall 0x808b3619: hdaps_init+0x0/0x1ea() returned -19.
initcall 0x808b3619 ran for 3 msecs: hdaps_init+0x0/0x1ea()
Calling initcall 0x808b3803: init_lm70+0x0/0xa()
initcall 0x808b3803: init_lm70+0x0/0xa() returned 0.
initcall 0x808b3803 ran for 0 msecs: init_lm70+0x0/0xa()
Calling initcall 0x808b4287: pc87360_init+0x0/0x161()
pc87360: PC8736x not detected, module not inserted.
initcall 0x808b4287: pc87360_init+0x0/0x161() returned -19.
initcall 0x808b4287 ran for 3 msecs: pc87360_init+0x0/0x161()
Calling initcall 0x808b43e8: vhci_init+0x0/0x59()
Bluetooth: Virtual HCI driver ver 1.2
initcall 0x808b43e8: vhci_init+0x0/0x59() returned 0.
initcall 0x808b43e8 ran for 3 msecs: vhci_init+0x0/0x59()
Calling initcall 0x808b4441: bcm203x_init+0x0/0x49()
Bluetooth: Broadcom Blutonium firmware driver ver 1.1
usbcore: registered new interface driver bcm203x
initcall 0x808b4441: bcm203x_init+0x0/0x49() returned 0.
initcall 0x808b4441 ran for 6 msecs: bcm203x_init+0x0/0x49()
Calling initcall 0x808b448a: bpa10x_init+0x0/0x49()
Bluetooth: Digianswer Bluetooth USB driver ver 0.8
usbcore: registered new interface driver bpa10x
initcall 0x808b448a: bpa10x_init+0x0/0x49() returned 0.
initcall 0x808b448a ran for 6 msecs: bpa10x_init+0x0/0x49()
Calling initcall 0x808b44d3: bfusb_init+0x0/0x49()
Bluetooth: BlueFRITZ! USB driver ver 1.1
usbcore: registered new interface driver bfusb
initcall 0x808b44d3: bfusb_init+0x0/0x49() returned 0.
initcall 0x808b44d3 ran for 6 msecs: bfusb_init+0x0/0x49()
Calling initcall 0x808b451c: isdn_init+0x0/0x278()
ISDN subsystem Rev: 1.1.2.3/1.1.2.3/1.1.2.2/none/1.1.2.2/1.1.2.2
initcall 0x808b451c: isdn_init+0x0/0x278() returned 0.
initcall 0x808b451c ran for 3 msecs: isdn_init+0x0/0x278()
Calling initcall 0x808b4814: icn_init+0x0/0xc9()
ICN-ISDN-driver Rev 1.65.6.8 mem=0x000d0000
icn: (line0) ICN-2B, port 0x320 added
initcall 0x808b4814: icn_init+0x0/0xc9() returned 0.
initcall 0x808b4814 ran for 6 msecs: icn_init+0x0/0xc9()
Calling initcall 0x808b48dd: act2000_init+0x0/0x58()
IBM Active 2000 ISDN driver
act2000: No cards defined yet
initcall 0x808b48dd: act2000_init+0x0/0x58() returned 0.
initcall 0x808b48dd ran for 6 msecs: act2000_init+0x0/0x58()
Calling initcall 0x808b4935: gigaset_init_module+0x0/0x32()
gigaset: Hansjoerg Lipp <[email protected]>, Tilman Schmidt <[email protected]>, Stefan Eilers
gigaset: Driver for Gigaset 307x
initcall 0x808b4935: gigaset_init_module+0x0/0x32() returned 0.
initcall 0x808b4935 ran for 6 msecs: gigaset_init_module+0x0/0x32()
Calling initcall 0x808b4967: usb_gigaset_init+0x0/0xe9()
gigaset: Register driver capabilities to LL
usbcore: registered new interface driver usb_gigasetusb_gigaset: Hansjoerg Lipp <[email protected]>, Stefan Eilersusb_gigaset: USB Driver for Gigaset 307x using M105
initcall 0x808b4967: usb_gigaset_init+0x0/0xe9() returned 0.
initcall 0x808b4967 ran for 12 msecs: usb_gigaset_init+0x0/0xe9()
Calling initcall 0x808b4a50: ser_gigaset_init+0x0/0xc3()
initcall 0x808b4a50: ser_gigaset_init+0x0/0xc3() returned 0.
initcall 0x808b4a50 ran for 0 msecs: ser_gigaset_init+0x0/0xc3()
Calling initcall 0x808b4b13: edac_init+0x0/0x87()
EDAC MC: Ver: 2.1.0 Oct 15 2007
initcall 0x808b4b13: edac_init+0x0/0x87() returned 0.
initcall 0x808b4b13 ran for 3 msecs: edac_init+0x0/0x87()
Calling initcall 0x808b4d8e: i82975x_init+0x0/0x6e()
initcall 0x808b4d8e: i82975x_init+0x0/0x6e() returned -19.
initcall 0x808b4d8e ran for 0 msecs: i82975x_init+0x0/0x6e()
Calling initcall 0x808b4fbb: i82860_init+0x0/0x6e()
initcall 0x808b4fbb: i82860_init+0x0/0x6e() returned -19.
initcall 0x808b4fbb ran for 0 msecs: i82860_init+0x0/0x6e()
Calling initcall 0x808b5623: pci_eisa_init_module+0x0/0x11()
initcall 0x808b5623: pci_eisa_init_module+0x0/0x11() returned 0.
initcall 0x808b5623 ran for 0 msecs: pci_eisa_init_module+0x0/0x11()
Calling initcall 0x808b5f99: init_soundcore+0x0/0x53()
initcall 0x808b5f99: init_soundcore+0x0/0x53() returned 0.
initcall 0x808b5f99 ran for 0 msecs: init_soundcore+0x0/0x53()
Calling initcall 0x808b7d58: flow_cache_init+0x0/0x142()
initcall 0x808b7d58: flow_cache_init+0x0/0x142() returned 0.
initcall 0x808b7d58 ran for 0 msecs: flow_cache_init+0x0/0x142()
Calling initcall 0x808b7e9a: pg_init+0x0/0x277()
pktgen v2.69: Packet Generator for packet performance testing.
initcall 0x808b7e9a: pg_init+0x0/0x277() returned 0.
initcall 0x808b7e9a ran for 3 msecs: pg_init+0x0/0x277()
Calling initcall 0x808b8199: llc_init+0x0/0x69()
initcall 0x808b8199: llc_init+0x0/0x69() returned 0.
initcall 0x808b8199 ran for 0 msecs: llc_init+0x0/0x69()
Calling initcall 0x808b8202: snap_init+0x0/0x2b()
initcall 0x808b8202: snap_init+0x0/0x2b() returned 0.
initcall 0x808b8202 ran for 0 msecs: snap_init+0x0/0x2b()
Calling initcall 0x808b822d: rif_init+0x0/0x63()
initcall 0x808b822d: rif_init+0x0/0x63() returned 0.
initcall 0x808b822d ran for 0 msecs: rif_init+0x0/0x63()
Calling initcall 0x808b9404: ipgre_init+0x0/0x8f()
GRE over IPv4 tunneling driver
initcall 0x808b9404: ipgre_init+0x0/0x8f() returned 0.
initcall 0x808b9404 ran for 3 msecs: ipgre_init+0x0/0x8f()
Calling initcall 0x808b94d4: init_syncookies+0x0/0x12()
initcall 0x808b94d4: init_syncookies+0x0/0x12() returned 0.
initcall 0x808b94d4 ran for 0 msecs: init_syncookies+0x0/0x12()
Calling initcall 0x808b94e6: xfrm4_beet_init+0x0/0xf()
initcall 0x808b94e6: xfrm4_beet_init+0x0/0xf() returned 0.
initcall 0x808b94e6 ran for 0 msecs: xfrm4_beet_init+0x0/0xf()
Calling initcall 0x808b94f5: xfrm4_transport_init+0x0/0xf()
initcall 0x808b94f5: xfrm4_transport_init+0x0/0xf() returned 0.
initcall 0x808b94f5 ran for 0 msecs: xfrm4_transport_init+0x0/0xf()
Calling initcall 0x808b9504: xfrm4_tunnel_init+0x0/0xf()
initcall 0x808b9504: xfrm4_tunnel_init+0x0/0xf() returned 0.
initcall 0x808b9504 ran for 0 msecs: xfrm4_tunnel_init+0x0/0xf()
Calling initcall 0x808b9ebc: cubictcp_register+0x0/0x8f()
TCP cubic registered
initcall 0x808b9ebc: cubictcp_register+0x0/0x8f() returned 0.
initcall 0x808b9ebc ran for 3 msecs: cubictcp_register+0x0/0x8f()
Calling initcall 0x808b9f4b: hstcp_register+0x0/0xa()
TCP highspeed registered
initcall 0x808b9f4b: hstcp_register+0x0/0xa() returned 0.
initcall 0x808b9f4b ran for 3 msecs: hstcp_register+0x0/0xa()
Calling initcall 0x808b9f55: tcp_veno_register+0x0/0xd()
TCP veno registered
initcall 0x808b9f55: tcp_veno_register+0x0/0xd() returned 0.
initcall 0x808b9f55 ran for 0 msecs: tcp_veno_register+0x0/0xd()
Calling initcall 0x808ba0f9: af_unix_init+0x0/0x5c()
NET: Registered protocol family 1
initcall 0x808ba0f9: af_unix_init+0x0/0x5c() returned 0.
initcall 0x808ba0f9 ran for 3 msecs: af_unix_init+0x0/0x5c()
Calling initcall 0x808ba155: packet_init+0x0/0x47()
NET: Registered protocol family 17
initcall 0x808ba155: packet_init+0x0/0x47() returned 0.
initcall 0x808ba155 ran for 0 msecs: packet_init+0x0/0x47()
Calling initcall 0x808ba19c: br_init+0x0/0xa6()
initcall 0x808ba19c: br_init+0x0/0xa6() returned 0.
initcall 0x808ba19c ran for 0 msecs: br_init+0x0/0xa6()
Calling initcall 0x808ba2cb: ipx_init+0x0/0xd4()
NET: Registered protocol family 4
initcall 0x808ba2cb: ipx_init+0x0/0xd4() returned 0.
initcall 0x808ba2cb ran for 12 msecs: ipx_init+0x0/0xd4()
Calling initcall 0x808ba904: irlan_init+0x0/0x262()
initcall 0x808ba904: irlan_init+0x0/0x262() returned 0.
initcall 0x808ba904 ran for 0 msecs: irlan_init+0x0/0x262()
Calling initcall 0x808bac9f: l2cap_init+0x0/0xca()
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
initcall 0x808bac9f: l2cap_init+0x0/0xca() returned 0.
initcall 0x808bac9f ran for 6 msecs: l2cap_init+0x0/0xca()
Calling initcall 0x808bad69: bnep_init+0x0/0x67()
Bluetooth: BNEP (Ethernet Emulation) ver 1.2
Bluetooth: BNEP filters: multicast
initcall 0x808bad69: bnep_init+0x0/0x67() returned 0.
initcall 0x808bad69 ran for 3 msecs: bnep_init+0x0/0x67()
Calling initcall 0x808bae47: init_sunrpc+0x0/0x4a()
initcall 0x808bae47: init_sunrpc+0x0/0x4a() returned 0.
initcall 0x808bae47 ran for 0 msecs: init_sunrpc+0x0/0x4a()
Calling initcall 0x808bae91: init_rpcsec_gss+0x0/0x2a()
initcall 0x808bae91: init_rpcsec_gss+0x0/0x2a() returned 0.
initcall 0x808bae91 ran for 0 msecs: init_rpcsec_gss+0x0/0x2a()
Calling initcall 0x808baebb: init_kerberos_module+0x0/0x25()
initcall 0x808baebb: init_kerberos_module+0x0/0x25() returned 0.
initcall 0x808baebb ran for 0 msecs: init_kerberos_module+0x0/0x25()
Calling initcall 0x808baee0: init_spkm3_module+0x0/0x25()
initcall 0x808baee0: init_spkm3_module+0x0/0x25() returned 0.
initcall 0x808baee0 ran for 0 msecs: init_spkm3_module+0x0/0x25()
Calling initcall 0x808baf05: af_rxrpc_init+0x0/0x169()
NET: Registered protocol family 33
initcall 0x808baf05: af_rxrpc_init+0x0/0x169() returned 0.
initcall 0x808baf05 ran for 3 msecs: af_rxrpc_init+0x0/0x169()
Calling initcall 0x808bb1b0: dccp_init+0x0/0x29f()
initcall 0x808bb1b0: dccp_init+0x0/0x29f() returned 0.
initcall 0x808bb1b0 ran for 0 msecs: dccp_init+0x0/0x29f()
Calling initcall 0x808bb512: dccp_v4_init+0x0/0x81()
initcall 0x808bb512: dccp_v4_init+0x0/0x81() returned 0.
initcall 0x808bb512 ran for 12 msecs: dccp_v4_init+0x0/0x81()
Calling initcall 0x808bb593: ccid3_module_init+0x0/0x68()
CCID: Registered CCID 3 (ccid3)
initcall 0x808bb593: ccid3_module_init+0x0/0x68() returned 0.
initcall 0x808bb593 ran for 3 msecs: ccid3_module_init+0x0/0x68()
Calling initcall 0x808bb5fb: dccp_li_init+0x0/0x33()
initcall 0x808bb5fb: dccp_li_init+0x0/0x33() returned 0.
initcall 0x808bb5fb ran for 0 msecs: dccp_li_init+0x0/0x33()
Calling initcall 0x808bb62e: sctp_init+0x0/0x682()
SCTP: Hash tables configured (established 65536 bind 43690)
initcall 0x808bb62e: sctp_init+0x0/0x682() returned 0.
initcall 0x808bb62e ran for 25 msecs: sctp_init+0x0/0x682()
Calling initcall 0x808bbd75: ieee80211_init+0x0/0x9b()
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <[email protected]>
initcall 0x808bbd75: ieee80211_init+0x0/0x9b() returned 0.
initcall 0x808bbd75 ran for 6 msecs: ieee80211_init+0x0/0x9b()
Calling initcall 0x808bbe10: ieee80211_crypto_init+0x0/0xa()ieee80211_crypt: registered algorithm 'NULL'
initcall 0x808bbe10: ieee80211_crypto_init+0x0/0xa() returned 0.
initcall 0x808bbe10 ran for 3 msecs: ieee80211_crypto_init+0x0/0xa()
Calling initcall 0x808bbe1a: ieee80211_crypto_wep_init+0x0/0xa()ieee80211_crypt: registered algorithm 'WEP'
initcall 0x808bbe1a: ieee80211_crypto_wep_init+0x0/0xa() returned 0.
initcall 0x808bbe1a ran for 3 msecs: ieee80211_crypto_wep_init+0x0/0xa()
Calling initcall 0x808bbe24: ieee80211_crypto_ccmp_init+0x0/0xa()ieee80211_crypt: registered algorithm 'CCMP'
initcall 0x808bbe24: ieee80211_crypto_ccmp_init+0x0/0xa() returned 0.
initcall 0x808bbe24 ran for 3 msecs: ieee80211_crypto_ccmp_init+0x0/0xa()
Calling initcall 0x80882baa: check_nmi_watchdog+0x0/0x19c()
Testing NMI watchdog ... OK.
initcall 0x80882baa: check_nmi_watchdog+0x0/0x19c() returned 0.
initcall 0x80882baa ran for 98 msecs: check_nmi_watchdog+0x0/0x19c()
Calling initcall 0x80882e55: io_apic_bug_finalize+0x0/0x16()
initcall 0x80882e55: io_apic_bug_finalize+0x0/0x16() returned 0.
initcall 0x80882e55 ran for 0 msecs: io_apic_bug_finalize+0x0/0x16()
Calling initcall 0x808841ed: balanced_irq_init+0x0/0x175()
Starting balanced_irq
initcall 0x808841ed: balanced_irq_init+0x0/0x175() returned 0.
initcall 0x808841ed ran for 3 msecs: balanced_irq_init+0x0/0x175()
Calling initcall 0x808852fe: print_ipi_mode+0x0/0x2b()
Using IPI Shortcut mode
initcall 0x808852fe: print_ipi_mode+0x0/0x2b() returned 0.
initcall 0x808852fe ran for 0 msecs: print_ipi_mode+0x0/0x2b()
Calling initcall 0x80885db3: disable_boot_consoles+0x0/0x3e()
initcall 0x80885db3: disable_boot_consoles+0x0/0x3e() returned 0.
initcall 0x80885db3 ran for 0 msecs: disable_boot_consoles+0x0/0x3e()
Calling initcall 0x8088726d: taskstats_init+0x0/0x44()
initcall 0x8088726d: taskstats_init+0x0/0x44() returned 0.
initcall 0x8088726d ran for 0 msecs: taskstats_init+0x0/0x44()
Calling initcall 0x8088c224: random32_reseed+0x0/0x52()
initcall 0x8088c224: random32_reseed+0x0/0x52() returned 0.
initcall 0x8088c224 ran for 0 msecs: random32_reseed+0x0/0x52()
Calling initcall 0x8088d376: pci_sysfs_init+0x0/0x31()
initcall 0x8088d376: pci_sysfs_init+0x0/0x31() returned 0.
initcall 0x8088d376 ran for 0 msecs: pci_sysfs_init+0x0/0x31()
Calling initcall 0x8088e7e2: seqgen_init+0x0/0xa()
initcall 0x8088e7e2: seqgen_init+0x0/0xa() returned 0.
initcall 0x8088e7e2 ran for 0 msecs: seqgen_init+0x0/0xa()
Calling initcall 0x8046d873: scsi_complete_async_scans+0x0/0xe3()
initcall 0x8046d873: scsi_complete_async_scans+0x0/0xe3() returned 0.
initcall 0x8046d873 ran for 0 msecs: scsi_complete_async_scans+0x0/0xe3()
Calling initcall 0x808b8abe: tcp_congestion_default+0x0/0xa()
initcall 0x808b8abe: tcp_congestion_default+0x0/0xa() returned 0.
initcall 0x808b8abe ran for 0 msecs: tcp_congestion_default+0x0/0xa()
Calling initcall 0x808b97cf: ip_auto_config+0x0/0x6ed()
initcall 0x808b97cf: ip_auto_config+0x0/0x6ed() returned 0.
initcall 0x808b97cf ran for 0 msecs: ip_auto_config+0x0/0x6ed()
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 400k freed
warning: process `kmodule' used the removed sysctl system call with 1.23.
EXT3 FS on sda1, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
warning: process `kudzu' used the removed sysctl system call with 1.49.
warning: process `kudzu' used the removed sysctl system call with 1.49.
WARNING: at net/core/dev.c:2161 net_rx_action() [<80564db4>] net_rx_action+0xce/0x186 [<8011ba98>] __do_softirq+0x6c/0xcf [<8011bb2d>] do_softirq+0x32/0x36 [<8011bcae>] irq_exit+0x35/0x40 [<80104fdb>] do_IRQ+0x5c/0x71 [<801048cd>] do_nmi+0x8f/0x238 [<801033a3>] common_interrupt+0x23/0x30 =======================
Quoted 12 lines · Ingo Molnar
got this warning with Linus' latest -git tree:
WARNING: at net/core/dev.c:2161 net_rx_action() [<80564db4>] net_rx_action+0xce/0x186 [<8011ba98>] __do_softirq+0x6c/0xcf [<8011bb2d>] do_softirq+0x32/0x36 [<8011bcae>] irq_exit+0x35/0x40 [<80104fdb>] do_IRQ+0x5c/0x71 [<801048cd>] do_nmi+0x8f/0x238 [<801033a3>] common_interrupt+0x23/0x30 =======================
Quoted 2 lines
box is operating fine otherwise. config and bootlog attached. This warning got introduced by:
unfortunately the warning seems spurious - i just rebooted the box into the same kernel and the message did not trigger again.
Ingo
Quoted 10 lines · Ingo Molnar
Quoted 10 lines
WARNING: at net/core/dev.c:2161 net_rx_action() [<80564db4>] net_rx_action+0xce/0x186 [<8011ba98>] __do_softirq+0x6c/0xcf [<8011bb2d>] do_softirq+0x32/0x36 [<8011bcae>] irq_exit+0x35/0x40 [<80104fdb>] do_IRQ+0x5c/0x71 [<801048cd>] do_nmi+0x8f/0x238 [<801033a3>] common_interrupt+0x23/0x30 =======================
Quoted 5 lines
Quoted 2 lines
box is operating fine otherwise. config and bootlog attached. This warning got introduced by:
unfortunately the warning seems spurious - i just rebooted the box into the same kernel and the message did not trigger again.
update: i got this warning for a second time now with another config - so i guess if someone sent me a fix-patch or debug-patch i would eventually trigger it within a day again.
Ingo
David Miller
maintainerFrom: Ingo Molnar <[email protected]>
Date: Mon, 15 Oct 2007 13:24:30 +0200
Quoted 11 lines
got this warning with Linus' latest -git tree:
WARNING: at net/core/dev.c:2161 net_rx_action() [<80564db4>] net_rx_action+0xce/0x186 [<8011ba98>] __do_softirq+0x6c/0xcf [<8011bb2d>] do_softirq+0x32/0x36 [<8011bcae>] irq_exit+0x35/0x40 [<80104fdb>] do_IRQ+0x5c/0x71 [<801048cd>] do_nmi+0x8f/0x238 [<801033a3>] common_interrupt+0x23/0x30 =======================
This is a driver bug, the work "budget" passed into a driver's ->poll() handler should never be exceeded. That's what this warning assertion is checking.
What ethernet card is in your system and what driver is being used to drive it?
Quoted 15 lines · David Miller
From: Ingo Molnar <[email protected]>
Date: Mon, 15 Oct 2007 13:24:30 +0200Quoted 11 lines
got this warning with Linus' latest -git tree:
WARNING: at net/core/dev.c:2161 net_rx_action() [<80564db4>] net_rx_action+0xce/0x186 [<8011ba98>] __do_softirq+0x6c/0xcf [<8011bb2d>] do_softirq+0x32/0x36 [<8011bcae>] irq_exit+0x35/0x40 [<80104fdb>] do_IRQ+0x5c/0x71 [<801048cd>] do_nmi+0x8f/0x238 [<801033a3>] common_interrupt+0x23/0x30 =======================
Quoted 6 lines
This is a driver bug, the work "budget" passed into a driver's ->poll() handler should never be exceeded. That's what this warning assertion is checking.
What ethernet card is in your system and what driver is being used to drive it?
it's forcedeth.
i've checked nv_napi_poll(), and i dont see how it could return larger than 'limit' number of packets.
it could return packets == limit though:
pkts = nv_rx_process_optimized(dev, budget);
...
if (pkts < budget) {
/* re-enable receive interrupts */
spin_lock_irqsave(&np->lock, flags);
__netif_rx_complete(dev, napi);...
return pkts;
shouldnt that be "pkts <= budget"? But even that shouldnt cause a larger than limit return. Weird.
there are two networking cards in the system, the other one is a:
eth1: RealTek RTL8139 at 0xf080e000, 00:c0:df:03:68:5d, IRQ 11
eth1: Identified 8139 chip type 'RTL-8139B'
but this one should be inactive (not plugged into the network). Should i try to get a debug print out of the actual 'weight' and 'work' integers, and of the n->poll function address?
Ingo
Quoted 29 lines · Ingo Molnar
Quoted 6 lines
This is a driver bug, the work "budget" passed into a driver's ->poll() handler should never be exceeded. That's what this warning assertion is checking.
What ethernet card is in your system and what driver is being used to drive it?
it's forcedeth.
i've checked
nv_napi_poll(), and i dont see how it could return larger than 'limit' number of packets.it could return packets == limit though:
pkts = nv_rx_process_optimized(dev, budget);...
if (pkts < budget) { /* re-enable receive interrupts */ spin_lock_irqsave(&np->lock, flags); __netif_rx_complete(dev, napi);...
return pkts;shouldnt that be "pkts <= budget"? But even that shouldnt cause a larger than limit return. Weird.
Quoted 8 lines
there are two networking cards in the system, the other one is a:
eth1: RealTek RTL8139 at
0xf080e000, 00:c0:df:03:68:5d, IRQ 11
eth1: Identified 8139 chip type 'RTL-8139B'but this one should be inactive (not plugged into the network). Should i try to get a debug print out of the actual 'weight' and 'work' integers, and of the
n->pollfunction address?
ok, i've added such a patch.
looking at the dev.c code - can napi_struct->weight be zero legitimately? If yes then the 0 gets passed to the driver and the driver would return 1 - violating the assertion.
Ingo
David Miller
maintainerFrom: Ingo Molnar <[email protected]>
Date: Tue, 16 Oct 2007 00:07:20 +0200
Quoted 3 lines
looking at the
dev.ccode - cannapi_struct->weightbe zero legitimately? If yes then the 0 gets passed to the driver and the driver would return 1 - violating the assertion.
I touched upon this in another reply.
For forcedeth it should never be zero, it gets set in netif_napi_add() to RX_WORK_PER_LOOP which is unconditionally defined to 64.
Afterwards napi->weight should never be modified and that is what is passed into n->poll().
Perhaps some memory scribble is causing it to be zero'd.
PATCH 1/1 forcedeth: fix the NAPI poll function
In reply to Ingo MolnarQuoted 9 lines · Ingo Molnar
Quoted 3 lines
but this one should be inactive (not plugged into the network). Should i try to get a debug print out of the actual 'weight' and 'work' integers, and of the
n->pollfunction address?ok, i've added such a patch.
looking at the
dev.ccode - cannapi_struct->weightbe zero legitimately? If yes then the 0 gets passed to the driver and the driver would return 1 - violating the assertion.
update:
[ 186.635916] WARNING: at net/core/dev.c:2166 net_rx_action() [ 186.641351] [<c060d9f5>] net_rx_action+0x145/0x1b0 [ 186.646191] [<c011d752>] __do_softirq+0x42/0x90 [ 186.650784] [<c011d7c6>] do_softirq+0x26/0x30 [ 186.655202] [<c011db48>] local_bh_enable+0x48/0xa0 [ 186.660055] [<c06023e0>] lock_sock_nested+0xa0/0xc0 [ 186.664995] [<c065da16>] tcp_recvmsg+0x16/0xbc0 [ 186.669588] [<c013e94b>] __generic_file_aio_write_nolock+0x27b/0x520 [ 186.676001] [<c0601d75>] sock_common_recvmsg+0x45/0x70 [ 186.681202] [<c05ff5df>] sock_aio_read+0x11f/0x140 [ 186.686054] [<c015c086>] do_sync_read+0xc6/0x110 [ 186.690735] [<c012b9b0>] autoremove_wake_function+0x0/0x40 [ 186.696280] [<c060dcfc>] net_tx_action+0x3c/0xe0 [ 186.700961] [<c015c9c2>] vfs_read+0x132/0x140 [ 186.705378] [<c015cd41>] sys_read+0x41/0x70 [ 186.709625] [<c0102b66>] sysenter_past_esp+0x5f/0x89 [ 186.714651] ======================= [ 186.718210] work: 65, weight: 64 [ 186.721414] ->poll: (nv_napi_poll+0x0/0x760)
so nv_napi_poll() returned with 65. How is that possible? Ah ...:
(rx_processed_cnt++ < limit)) {that should be:
(++rx_processed_cnt < limit)) {right? Find the fix below.
Ingo
-------------------->
Subject: forcedeth: fix the NAPI poll function
From: Ingo Molnar <[email protected]>
fix the forcedeth NAPI poll function to not emit this warning:
[ 186.635916] WARNING: at net/core/dev.c:2166 net_rx_action() [ 186.641351] [<c060d9f5>] net_rx_action+0x145/0x1b0 [ 186.646191] [<c011d752>] __do_softirq+0x42/0x90 [ 186.650784] [<c011d7c6>] do_softirq+0x26/0x30 [ 186.655202] [<c011db48>] local_bh_enable+0x48/0xa0 [ 186.660055] [<c06023e0>] lock_sock_nested+0xa0/0xc0 [ 186.664995] [<c065da16>] tcp_recvmsg+0x16/0xbc0 [ 186.669588] [<c013e94b>] __generic_file_aio_write_nolock+0x27b/0x520 [ 186.676001] [<c0601d75>] sock_common_recvmsg+0x45/0x70 [ 186.681202] [<c05ff5df>] sock_aio_read+0x11f/0x140 [ 186.686054] [<c015c086>] do_sync_read+0xc6/0x110 [ 186.690735] [<c012b9b0>] autoremove_wake_function+0x0/0x40 [ 186.696280] [<c060dcfc>] net_tx_action+0x3c/0xe0 [ 186.700961] [<c015c9c2>] vfs_read+0x132/0x140 [ 186.705378] [<c015cd41>] sys_read+0x41/0x70 [ 186.709625] [<c0102b66>] sysenter_past_esp+0x5f/0x89 [ 186.714651] =======================
--- drivers/net/forcedeth.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/net/forcedeth.c +2 -2
@@ -2274,7 +2274,7 @@ static int nv_rx_process(struct net_deviwhile ((np->get_rx.orig != np->put_rx.orig) && !((flags =le32_to_cpu (np->get_rx.orig->flaglen)) &NV_RX_AVAIL ) && - (rx_processed_cnt++ < limit)) { + (++rx_processed_cnt < limit)) {dprintk (KERN_DEBUG "%s: nv_rx_process: flags 0x%x.\n" , dev->name, flags);
@@ -2412,7 +2412,7 @@ static int nv_rx_process_optimized(strucwhile ((np->get_rx.ex != np->put_rx.ex) && !((flags =le32_to_cpu (np->get_rx.ex->flaglen)) &NV_RX2_AVAIL ) && - (rx_processed_cnt++ < limit)) { + (++rx_processed_cnt < limit)) {dprintk (KERN_DEBUG "%s: nv_rx_process_optimized: flags 0x%x.\n" , dev->name, flags);
Re: [patch] forcedeth: fix the NAPI poll function
From: Ingo Molnar <[email protected]>
Date: Tue, 16 Oct 2007 00:30:09 +0200
Quoted 23 lines
Subject: forcedeth: fix the NAPI poll function
From: Ingo Molnar <[email protected]>fix the forcedeth NAPI poll function to not emit this warning:
[ 186.635916] WARNING: at net/core/dev.c:2166 net_rx_action() [ 186.641351] [<c060d9f5>] net_rx_action+0x145/0x1b0 [ 186.646191] [<c011d752>] __do_softirq+0x42/0x90 [ 186.650784] [<c011d7c6>] do_softirq+0x26/0x30 [ 186.655202] [<c011db48>] local_bh_enable+0x48/0xa0 [ 186.660055] [<c06023e0>] lock_sock_nested+0xa0/0xc0 [ 186.664995] [<c065da16>] tcp_recvmsg+0x16/0xbc0 [ 186.669588] [<c013e94b>] __generic_file_aio_write_nolock+0x27b/0x520 [ 186.676001] [<c0601d75>] sock_common_recvmsg+0x45/0x70 [ 186.681202] [<c05ff5df>] sock_aio_read+0x11f/0x140 [ 186.686054] [<c015c086>] do_sync_read+0xc6/0x110 [ 186.690735] [<c012b9b0>] autoremove_wake_function+0x0/0x40 [ 186.696280] [<c060dcfc>] net_tx_action+0x3c/0xe0 [ 186.700961] [<c015c9c2>] vfs_read+0x132/0x140 [ 186.705378] [<c015cd41>] sys_read+0x41/0x70 [ 186.709625] [<c0102b66>] sysenter_past_esp+0x5f/0x89 [ 186.714651] =======================
Quoted 1 line
Signed-off-by Ingo Molnar <[email protected]>
Excellent catch:
Re: [patch] forcedeth: fix the NAPI poll function
In reply to Ingo MolnarQuoted 84 lines · Ingo Molnar
Quoted 4 lines · Ingo Molnar
Quoted 1 line
but this one should be inactive (not plugged into the network). Should i try to get a debug print out of the actual 'weight' and 'work' integers, and of the
n->pollfunction address?ok, i've added such a patch.
looking at the
dev.ccode - cannapi_struct->weightbe zero legitimately? If yes then the 0 gets passed to the driver and the driver would return 1 - violating the assertion.update:
[ 186.635916] WARNING: at net/core/dev.c:2166 net_rx_action() [ 186.641351] [<c060d9f5>] net_rx_action+0x145/0x1b0 [ 186.646191] [<c011d752>] __do_softirq+0x42/0x90 [ 186.650784] [<c011d7c6>] do_softirq+0x26/0x30 [ 186.655202] [<c011db48>] local_bh_enable+0x48/0xa0 [ 186.660055] [<c06023e0>] lock_sock_nested+0xa0/0xc0 [ 186.664995] [<c065da16>] tcp_recvmsg+0x16/0xbc0 [ 186.669588] [<c013e94b>] __generic_file_aio_write_nolock+0x27b/0x520 [ 186.676001] [<c0601d75>] sock_common_recvmsg+0x45/0x70 [ 186.681202] [<c05ff5df>] sock_aio_read+0x11f/0x140 [ 186.686054] [<c015c086>] do_sync_read+0xc6/0x110 [ 186.690735] [<c012b9b0>] autoremove_wake_function+0x0/0x40 [ 186.696280] [<c060dcfc>] net_tx_action+0x3c/0xe0 [ 186.700961] [<c015c9c2>] vfs_read+0x132/0x140 [ 186.705378] [<c015cd41>] sys_read+0x41/0x70 [ 186.709625] [<c0102b66>] sysenter_past_esp+0x5f/0x89 [ 186.714651] ======================= [ 186.718210] work: 65, weight: 64 [ 186.721414] ->poll: (nv_napi_poll+0x0/0x760)so
nv_napi_poll()returned with 65. How is that possible? Ah ...:(rx_processed_cnt++ < limit)) {that should be:
(++rx_processed_cnt < limit)) {right? Find the fix below.
Ingo
-------------------->
Subject: forcedeth: fix the NAPI poll function
From: Ingo Molnar <[email protected]>fix the forcedeth NAPI poll function to not emit this warning:
[ 186.635916] WARNING: at net/core/dev.c:2166 net_rx_action() [ 186.641351] [<c060d9f5>] net_rx_action+0x145/0x1b0 [ 186.646191] [<c011d752>] __do_softirq+0x42/0x90 [ 186.650784] [<c011d7c6>] do_softirq+0x26/0x30 [ 186.655202] [<c011db48>] local_bh_enable+0x48/0xa0 [ 186.660055] [<c06023e0>] lock_sock_nested+0xa0/0xc0 [ 186.664995] [<c065da16>] tcp_recvmsg+0x16/0xbc0 [ 186.669588] [<c013e94b>] __generic_file_aio_write_nolock+0x27b/0x520 [ 186.676001] [<c0601d75>] sock_common_recvmsg+0x45/0x70 [ 186.681202] [<c05ff5df>] sock_aio_read+0x11f/0x140 [ 186.686054] [<c015c086>] do_sync_read+0xc6/0x110 [ 186.690735] [<c012b9b0>] autoremove_wake_function+0x0/0x40 [ 186.696280] [<c060dcfc>] net_tx_action+0x3c/0xe0 [ 186.700961] [<c015c9c2>] vfs_read+0x132/0x140 [ 186.705378] [<c015cd41>] sys_read+0x41/0x70 [ 186.709625] [<c0102b66>] sysenter_past_esp+0x5f/0x89 [ 186.714651] =======================Signed-off-by Ingo Molnar <[email protected]>--- drivers/net/forcedeth.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)Index:
linux/drivers/net/forcedeth.c
===================================================================drivers/net/forcedeth.c +1
-1@@ -2274,7 +2274,7 @@ static int nv_rx_process(struct net_deviwhile ((np->get_rx.orig != np->put_rx.orig) && !((flags =le32_to_cpu (np->get_rx.orig->flaglen)) &NV_RX_AVAIL ) && - (rx_processed_cnt++ < limit)) { + (++rx_processed_cnt < limit)) {dprintk (KERN_DEBUG "%s: nv_rx_process: flags 0x%x.\n" , dev->name, flags);
drivers/net/forcedeth.c static int nv_rx_process_optimized(struc · line 2415
Quoted 5 lines
drivers/net/forcedeth.c +1
-1@@ -2412,7 +2412,7 @@ static int nv_rx_process_optimized(strucwhile ((np->get_rx.ex != np->put_rx.ex) && !((flags =le32_to_cpu (np->get_rx.ex->flaglen)) &NV_RX2_AVAIL ) && - (rx_processed_cnt++ < limit)) { + (++rx_processed_cnt < limit)) {
Two comments:
1) we have a vague definition of "RX work processed." Due to error conditions and goto's in that function, rx_processed_cnt may or may not equal the number of packets actually processed.
2) man I dislike these inline C statement combinations (ranting at original code style, not you). I would much rather waste a few extra lines of source code and make the conditions obvious:
while (... && (rx_processed_cnt < limit)) {
rx_processed_cnt++;
...
}or even
while (1) {
...
if (rx_processed_cnt == limit)
break;
rx_processed_cnt++;
}The compiler certainly doesn't care, and IMO it prevents bugs.
Jeff
Re: [patch] forcedeth: fix the NAPI poll function
Quoted 14 lines · Jeff Garzik
Quoted 14 lines
drivers/net/forcedeth.c +0
-0@@ -2274,7 +2274,7 @@ static int nv_rx_process(struct net_devi while((np->get_rx.orig != np->put_rx.orig) && !((flags = le32_to_cpu(np->get_rx.orig->flaglen)) &
NV_RX_AVAIL) &&drivers/net/forcedeth.c +1
-1- (rx_processed_cnt++ < limit)) { + (++rx_processed_cnt < limit)) {dprintk (KERN_DEBUG "%s: nv_rx_process: flags 0x%x.\n" , dev->name, flags);@@ -2412,7 +2412,7 @@ static int nv_rx_process_optimized(struc
Quoted 5 lines
drivers/net/forcedeth.c
Quoted 5 lines
drivers/net/forcedeth.c +0
-0while((np->get_rx.ex != np->put_rx.ex) && !((flags = le32_to_cpu(np->get_rx.ex->flaglen)) &
NV_RX2_AVAIL) &&drivers/net/forcedeth.c +1
-1- (rx_processed_cnt++ < limit)) { + (++rx_processed_cnt < limit)) {
Though it wasn't clear, that's an ACK
I'll push the patch if nobody else beats me to it.
Re: [patch] forcedeth: fix the NAPI poll function
In reply to Jeff GarzikQuoted 18 lines · Jeff Garzik
Two comments:
1) we have a vague definition of "RX work processed." Due to error conditions and goto's in that function,
rx_processed_cntmay or may not equal the number of packets actually processed.2) man I dislike these inline C statement combinations (ranting at original code style, not you). I would much rather waste a few extra lines of source code and make the conditions obvious:
while (... && (rx_processed_cnt < limit)) { rx_processed_cnt++; ... }or even
Quoted 8 lines
while (1) { ... if (rx_processed_cnt == limit) break; rx_processed_cnt++; }The compiler certainly doesn't care, and IMO it prevents bugs.
agreed. Do you have an uptodate patch/git-URI for the forcedeth rewrite you did? I can throw it into the testbed.
Ingo
Re: [patch] forcedeth: fix the NAPI poll function
Quoted 23 lines · Ingo Molnar
Quoted 21 lines · Jeff Garzik
Two comments:
1) we have a vague definition of "RX work processed." Due to error conditions and goto's in that function,
rx_processed_cntmay or may not equal the number of packets actually processed.2) man I dislike these inline C statement combinations (ranting at original code style, not you). I would much rather waste a few extra lines of source code and make the conditions obvious:
while (... && (rx_processed_cnt < limit)) { rx_processed_cnt++; ... }or even
while (1) { ... if (rx_processed_cnt == limit) break; rx_processed_cnt++; }
Quoted 3 lines
Quoted 1 line
The compiler certainly doesn't care, and IMO it prevents bugs.
agreed. Do you have an uptodate patch/git-URI for the forcedeth rewrite you did? I can throw it into the testbed.
Branch 'fe-lock' ofgit://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/netdev-2.6.git
It works here locally, but at this very minute I am rewriting those changesets yet again :)
Jeff
Re: [patch] forcedeth: fix the NAPI poll function
Quoted 10 lines · Jeff Garzik
Quoted 4 lines
Quoted 1 line
The compiler certainly doesn't care, and IMO it prevents bugs.
agreed. Do you have an uptodate patch/git-URI for the forcedeth rewrite you did? I can throw it into the testbed.
Branch 'fe-lock' of
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/netdev-2.6.gitIt works here locally, but at this very minute I am rewriting those changesets yet again :)
FYI, looks good so far, ontop of Linus' latest -git tree.
btw., one thing i always found weird about forcedeth is that it generates an extra ~100 irqs per second even when there's no network traffic:
11: 89752 XT-PIC-XT eth0 11: 89854 XT-PIC-XT eth0 11: 89955 XT-PIC-XT eth0 11: 90056 XT-PIC-XT eth0 11: 90157 XT-PIC-XT eth0
(irq count snapshot every second). Just in case it's easy to fix ...
Ingo
Re: [patch] forcedeth: fix the NAPI poll function
Quoted 13 lines · Ingo Molnar
Quoted 6 lines · Jeff Garzik
Quoted 2 lines
Quoted 1 line
The compiler certainly doesn't care, and IMO it prevents bugs.
agreed. Do you have an uptodate patch/git-URI for the forcedeth rewrite you did? I can throw it into the testbed.
Branch 'fe-lock' of
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/netdev-2.6.gitIt works here locally, but at this very minute I am rewriting those changesets yet again :)
FYI, looks good so far, ontop of Linus' latest -git tree.
btw., one thing i always found weird about forcedeth is that it generates an extra ~100 irqs per second even when there's no network traffic:
Quoted 7 lines
11: 89752 XT-PIC-XT eth0 11: 89854 XT-PIC-XT eth0 11: 89955 XT-PIC-XT eth0 11: 90056 XT-PIC-XT eth0 11: 90157 XT-PIC-XT eth0(irq count snapshot every second). Just in case it's easy to fix ...
May I presume that behavior occurs in both mainline and my fe-lock branch?
That is likely the NIC's timer irq, which is programmed to kick the irq handler every so often. DEV_NEED_TIMERIRQ is a starting point, as well as "Known bugs" at the top of forcedeth.c, if you're curious.
I'm _betting_ that some of that can be eliminated, but we'll see...
Jeff
Re: [patch] forcedeth: fix the NAPI poll function
Quoted 12 lines · Jeff Garzik
Quoted 12 lines
FYI, looks good so far, ontop of Linus' latest -git tree.
btw., one thing i always found weird about forcedeth is that it generates an extra ~100 irqs per second even when there's no network traffic:
11: 89752 XT-PIC-XT eth0 11: 89854 XT-PIC-XT eth0 11: 89955 XT-PIC-XT eth0 11: 90056 XT-PIC-XT eth0 11: 90157 XT-PIC-XT eth0
Quoted 5 lines
Quoted 1 line
(irq count snapshot every second). Just in case it's easy to fix ...
May I presume that behavior occurs in both mainline and my fe-lock branch?
correct.
Quoted 5 lines
That is likely the NIC's timer irq, which is programmed to kick the irq handler every so often.
DEV_NEED_TIMERIRQis a starting point, as well as "Known bugs" at the top offorcedeth.c, if you're curious.I'm _betting_ that some of that can be eliminated, but we'll see...
ok. Was just a FYI - you were looking for feedback :-)
Ingo
Re: [patch] forcedeth: fix the NAPI poll function
Quoted 12 lines · Ingo Molnar
Quoted 10 lines · Jeff Garzik
Quoted 10 lines
FYI, looks good so far, ontop of Linus' latest -git tree.
btw., one thing i always found weird about forcedeth is that it generates an extra ~100 irqs per second even when there's no network traffic:
11: 89752 XT-PIC-XT eth0 11: 89854 XT-PIC-XT eth0 11: 89955 XT-PIC-XT eth0 11: 90056 XT-PIC-XT eth0 11: 90157 XT-PIC-XT eth0
Quoted 5 lines
Quoted 3 lines
Quoted 1 line
(irq count snapshot every second). Just in case it's easy to fix ...
May I presume that behavior occurs in both mainline and my fe-lock branch?
correct.
Any chance of getting a quick comparison of forcedeth CPU usage in your setup, between old driver and fe-lock driver?
I'm curious about the effects of fe-lock on CPU usage, which NAPI is known to perturb (in positive or negative directions, depending on conditions).
I presume both drivers can work at wire speed, sans any "too many iterations" problems...
Quoted 5 lines
Quoted 3 lines
That is likely the NIC's timer irq, which is programmed to kick the irq handler every so often.
DEV_NEED_TIMERIRQis a starting point, as well as "Known bugs" at the top offorcedeth.c, if you're curious.I'm _betting_ that some of that can be eliminated, but we'll see...
ok. Was just a FYI - you were looking for feedback :-)
Thanks! :)
Jeff
Re: [patch] forcedeth: fix the NAPI poll function
In reply to Ingo MolnarQuoted 84 lines · Ingo Molnar
Quoted 4 lines · Ingo Molnar
Quoted 1 line
but this one should be inactive (not plugged into the network). Should i try to get a debug print out of the actual 'weight' and 'work' integers, and of the
n->pollfunction address?ok, i've added such a patch.
looking at the
dev.ccode - cannapi_struct->weightbe zero legitimately? If yes then the 0 gets passed to the driver and the driver would return 1 - violating the assertion.update:
[ 186.635916] WARNING: at net/core/dev.c:2166 net_rx_action() [ 186.641351] [<c060d9f5>] net_rx_action+0x145/0x1b0 [ 186.646191] [<c011d752>] __do_softirq+0x42/0x90 [ 186.650784] [<c011d7c6>] do_softirq+0x26/0x30 [ 186.655202] [<c011db48>] local_bh_enable+0x48/0xa0 [ 186.660055] [<c06023e0>] lock_sock_nested+0xa0/0xc0 [ 186.664995] [<c065da16>] tcp_recvmsg+0x16/0xbc0 [ 186.669588] [<c013e94b>] __generic_file_aio_write_nolock+0x27b/0x520 [ 186.676001] [<c0601d75>] sock_common_recvmsg+0x45/0x70 [ 186.681202] [<c05ff5df>] sock_aio_read+0x11f/0x140 [ 186.686054] [<c015c086>] do_sync_read+0xc6/0x110 [ 186.690735] [<c012b9b0>] autoremove_wake_function+0x0/0x40 [ 186.696280] [<c060dcfc>] net_tx_action+0x3c/0xe0 [ 186.700961] [<c015c9c2>] vfs_read+0x132/0x140 [ 186.705378] [<c015cd41>] sys_read+0x41/0x70 [ 186.709625] [<c0102b66>] sysenter_past_esp+0x5f/0x89 [ 186.714651] ======================= [ 186.718210] work: 65, weight: 64 [ 186.721414] ->poll: (nv_napi_poll+0x0/0x760)so
nv_napi_poll()returned with 65. How is that possible? Ah ...:(rx_processed_cnt++ < limit)) {that should be:
(++rx_processed_cnt < limit)) {right? Find the fix below.
Ingo
-------------------->
Subject: forcedeth: fix the NAPI poll function
From: Ingo Molnar <[email protected]>fix the forcedeth NAPI poll function to not emit this warning:
[ 186.635916] WARNING: at net/core/dev.c:2166 net_rx_action() [ 186.641351] [<c060d9f5>] net_rx_action+0x145/0x1b0 [ 186.646191] [<c011d752>] __do_softirq+0x42/0x90 [ 186.650784] [<c011d7c6>] do_softirq+0x26/0x30 [ 186.655202] [<c011db48>] local_bh_enable+0x48/0xa0 [ 186.660055] [<c06023e0>] lock_sock_nested+0xa0/0xc0 [ 186.664995] [<c065da16>] tcp_recvmsg+0x16/0xbc0 [ 186.669588] [<c013e94b>] __generic_file_aio_write_nolock+0x27b/0x520 [ 186.676001] [<c0601d75>] sock_common_recvmsg+0x45/0x70 [ 186.681202] [<c05ff5df>] sock_aio_read+0x11f/0x140 [ 186.686054] [<c015c086>] do_sync_read+0xc6/0x110 [ 186.690735] [<c012b9b0>] autoremove_wake_function+0x0/0x40 [ 186.696280] [<c060dcfc>] net_tx_action+0x3c/0xe0 [ 186.700961] [<c015c9c2>] vfs_read+0x132/0x140 [ 186.705378] [<c015cd41>] sys_read+0x41/0x70 [ 186.709625] [<c0102b66>] sysenter_past_esp+0x5f/0x89 [ 186.714651] =======================Signed-off-by Ingo Molnar <[email protected]>--- drivers/net/forcedeth.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)Index:
linux/drivers/net/forcedeth.c
===================================================================drivers/net/forcedeth.c +1
-1@@ -2274,7 +2274,7 @@ static int nv_rx_process(struct net_deviwhile ((np->get_rx.orig != np->put_rx.orig) && !((flags =le32_to_cpu (np->get_rx.orig->flaglen)) &NV_RX_AVAIL ) && - (rx_processed_cnt++ < limit)) { + (++rx_processed_cnt < limit)) {dprintk (KERN_DEBUG "%s: nv_rx_process: flags 0x%x.\n" , dev->name, flags);
drivers/net/forcedeth.c static int nv_rx_process_optimized(struc · line 2415
Quoted 5 lines
drivers/net/forcedeth.c +1
-1@@ -2412,7 +2412,7 @@ static int nv_rx_process_optimized(strucwhile ((np->get_rx.ex != np->put_rx.ex) && !((flags =le32_to_cpu (np->get_rx.ex->flaglen)) &NV_RX2_AVAIL ) && - (rx_processed_cnt++ < limit)) { + (++rx_processed_cnt < limit)) {
Would the attached patch be ok with people?
It's basically the same thing, except that it aligns a bit more closely with forcedeth rework stuff I'm doing.
I'll send upstream today unless people scream...
Jeff
drivers/net/forcedeth.c +5 -3
@@ -2268,13 +2268,13 @@ static int nv_rx_process(struct net_device *dev, int limit) {struct fe_priv *np =netdev_priv (dev);u32 flags; -u32 rx_processed_cnt =0 ; +int rx_work =0 ;struct sk_buff *skb;int len;while ((np->get_rx.orig != np->put_rx.orig) && !((flags =le32_to_cpu (np->get_rx.orig->flaglen)) &NV_RX_AVAIL ) && - (rx_processed_cnt++ < limit)) { + (rx_work < limit)) {dprintk (KERN_DEBUG "%s: nv_rx_process: flags 0x%x.\n" , dev->name, flags);
@@ -2396,9 +2396,11 @@ next_pkt: np->get_rx.orig = np->first_rx.orig;if (unlikely (np->get_rx_ctx++ == np->last_rx_ctx)) np->get_rx_ctx = np->first_rx_ctx; + + rx_work++; } -return rx_processed_cnt; +return rx_work; }static int nv_rx_process_optimized (struct net_device *dev,int limit)
Ingo Molnar
Acked-byRe: [patch] forcedeth: fix the NAPI poll function
Quoted 6 lines · Jeff Garzik
Would the attached patch be ok with people?
It's basically the same thing, except that it aligns a bit more closely with forcedeth rework stuff I'm doing.
I'll send upstream today unless people scream...
looks good to me.
Ingo
PATCH 1/1 forcedeth: fix the NAPI poll function, take #2
Quoted 2 lines
I'll send upstream today unless people scream...
albeit you forgot to merge half of my patch :-/ The (tested) patch below fixes that.
Ingo
---------------->
Subject: forcedeth: fix rx-work condition in nv_rx_process_optimized() too
From: Ingo Molnar <[email protected]>
the merge of my previous fix to forcedeth.c lots an important hunk.
this patch fixes that.
--- drivers/net/forcedeth.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-)
drivers/net/forcedeth.c +5 -3
@@ -2408,13 +2408,13 @@ static int nv_rx_process_optimized(strucstruct fe_priv *np =netdev_priv (dev);u32 flags;u32 vlanflags =0 ; -u32 rx_processed_cnt =0 ; +int rx_work =0 ;struct sk_buff *skb;int len;while ((np->get_rx.ex != np->put_rx.ex) && !((flags =le32_to_cpu (np->get_rx.ex->flaglen)) &NV_RX2_AVAIL ) && - (rx_processed_cnt++ < limit)) { + (rx_work < limit)) {dprintk (KERN_DEBUG "%s: nv_rx_process_optimized: flags 0x%x.\n" , dev->name, flags);
@@ -2517,9 +2517,11 @@ next_pkt: np->get_rx.ex = np->first_rx.ex;if (unlikely (np->get_rx_ctx++ == np->last_rx_ctx)) np->get_rx_ctx = np->first_rx_ctx; + + rx_work++; } -return rx_processed_cnt; +return rx_work; }static void set_bufsize (struct net_device *dev)
Jeff Garzik
AppliedRe: [patch] forcedeth: fix the NAPI poll function, take #2
Quoted 10 lines · Ingo Molnar
Quoted 1 line
I'll send upstream today unless people scream...
albeit you forgot to merge half of my patch :-/ The (tested) patch below fixes that.
Ingo
---------------->
Subject: forcedeth: fix rx-work condition innv_rx_process_optimized()too
From: Ingo Molnar <[email protected]>
Quoted 8 lines
the merge of my previous fix to
forcedeth.clots an important hunk.this patch fixes that.
Signed-off-by Ingo Molnar <[email protected]>--- drivers/net/forcedeth.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-)
applied
David Miller
maintainerFrom: Ingo Molnar <[email protected]>
Date: Tue, 16 Oct 2007 00:03:57 +0200
Quoted 40 lines · David Miller
Quoted 16 lines
From: Ingo Molnar <[email protected]>
Date: Mon, 15 Oct 2007 13:24:30 +0200Quoted 11 lines
got this warning with Linus' latest -git tree:
WARNING: at net/core/dev.c:2161 net_rx_action() [<80564db4>] net_rx_action+0xce/0x186 [<8011ba98>] __do_softirq+0x6c/0xcf [<8011bb2d>] do_softirq+0x32/0x36 [<8011bcae>] irq_exit+0x35/0x40 [<80104fdb>] do_IRQ+0x5c/0x71 [<801048cd>] do_nmi+0x8f/0x238 [<801033a3>] common_interrupt+0x23/0x30 =======================Quoted 6 lines
This is a driver bug, the work "budget" passed into a driver's ->poll() handler should never be exceeded. That's what this warning assertion is checking.
What ethernet card is in your system and what driver is being used to drive it?
it's forcedeth.
i've checked
nv_napi_poll(), and i dont see how it could return larger than 'limit' number of packets.it could return packets == limit though:
pkts = nv_rx_process_optimized(dev, budget);...
if (pkts < budget) { /* re-enable receive interrupts */ spin_lock_irqsave(&np->lock, flags); __netif_rx_complete(dev, napi);
Quoted 5 lines
...
return pkts;shouldnt that be "pkts <= budget"? But even that shouldnt cause a larger than limit return. Weird.
No, not in this case. The driver must only netif_rx_complete() if it consumed strictly less than "budget" worth of work.
Quoted 8 lines
there are two networking cards in the system, the other one is a:
eth1: RealTek RTL8139 at
0xf080e000, 00:c0:df:03:68:5d, IRQ 11
eth1: Identified 8139 chip type 'RTL-8139B'but this one should be inactive (not plugged into the network). Should i try to get a debug print out of the actual 'weight' and 'work' integers, and of the
n->pollfunction address?
That might help.
I don't see any possible nv_rx_process{,_optimized}() can return "work
Quoted 1 line
budget" either. But I do notice these loops unconditionally execute
at least once, perhaps budget is being passed erroneously in as zero?
Quoted 31 lines · Ingo Molnar
Quoted 14 lines · David Miller
From: Ingo Molnar <[email protected]>
Date: Mon, 15 Oct 2007 13:24:30 +0200Quoted 11 lines
got this warning with Linus' latest -git tree:
WARNING: at net/core/dev.c:2161 net_rx_action() [<80564db4>] net_rx_action+0xce/0x186 [<8011ba98>] __do_softirq+0x6c/0xcf [<8011bb2d>] do_softirq+0x32/0x36 [<8011bcae>] irq_exit+0x35/0x40 [<80104fdb>] do_IRQ+0x5c/0x71 [<801048cd>] do_nmi+0x8f/0x238 [<801033a3>] common_interrupt+0x23/0x30 =======================Quoted 5 lines
This is a driver bug, the work "budget" passed into a driver's ->poll() handler should never be exceeded. That's what this warning assertion is checking.
What ethernet card is in your system and what driver is being used to drive it?
it's forcedeth.
i've checked
nv_napi_poll(), and i dont see how it could return larger than 'limit' number of packets.it could return packets == limit though:
pkts = nv_rx_process_optimized(dev, budget);...
Quoted 8 lines
if (pkts < budget) { /* re-enable receive interrupts */ spin_lock_irqsave(&np->lock, flags); __netif_rx_complete(dev, napi);...
return pkts;
FWIW, forcedeth has this funky disable_irq()-based locking mechanism that is currently the subject of some kernel.org bugzillas. I would also check and make sure that isn't perturbing your results (even though it seems unrelated, based on what I read here). That might include disabling MSI if it's enabled, and/or turning on spinlock debugging.
Jeff