Skip to contentSkip to conversation

: Section mismatch : reference to......

ARM Kristoffer Ericson 2 participants 7 messages Oct 23, 2007

lore
Share & tools
lore
#0 lore raw

Best way to handle this?

  LD      init/built-in.o
  LD      .tmp_vmlinux1
  KSYM    .tmp_kallsyms1.S
  AS      .tmp_kallsyms1.o
  LD      .tmp_vmlinux2
  KSYM    .tmp_kallsyms2.S
  AS      .tmp_kallsyms2.o
  LD      vmlinux.o
  MODPOST vmlinux.o
WARNING: vmlinux.o(.text+0x9afc): Section mismatch: reference to .init.text:sa1110_mb_enable (between 'sa1111_probe' and 'sa1111_remove')
WARNING: vmlinux.o(.text+0x13b1ac): Section mismatch: reference to .init.text:pcmcia_jornada720_init (between 'pcmcia_probe' and 'pcmcia_remove')
  LD      vmlinux
  SYSMAP  System.map
  SYSMAP  .tmp_System.map
  OBJCOPY arch/arm/boot/Image
  Kernel: arch/arm/boot/Image is ready
  AS      arch/arm/boot/compressed/head.o
  GZIP    arch/arm/boot/compressed/piggy.gz
  AS      arch/arm/boot/compressed/piggy.o
  CC      arch/arm/boot/compressed/misc.o
  AS      arch/arm/boot/compressed/head-sa1100.o
  LD      arch/arm/boot/compressed/vmlinux

OBJCOPY arch/arm/boot/zImage
Kernel: arch/arm/boot/zImage is ready

#1 lore raw
Quoted 25 lines · On Tue, 23 Oct 2007 19:52:07 -0700 Kristoffer Ericson wrote:

Best way to handle this?

  LD      init/built-in.o
  LD      .tmp_vmlinux1
  KSYM    .tmp_kallsyms1.S
  AS      .tmp_kallsyms1.o
  LD      .tmp_vmlinux2
  KSYM    .tmp_kallsyms2.S
  AS      .tmp_kallsyms2.o
  LD      vmlinux.o
  MODPOST vmlinux.o
WARNING: vmlinux.o(.text+0x9afc): Section mismatch: reference to .init.text:sa1110_mb_enable (between 'sa1111_probe' and 'sa1111_remove')
WARNING: vmlinux.o(.text+0x13b1ac): Section mismatch: reference to .init.text:pcmcia_jornada720_init (between 'pcmcia_probe' and 'pcmcia_remove')
  LD      vmlinux
  SYSMAP  System.map
  SYSMAP  .tmp_System.map
  OBJCOPY arch/arm/boot/Image
  Kernel: arch/arm/boot/Image is ready
  AS      arch/arm/boot/compressed/head.o
  GZIP    arch/arm/boot/compressed/piggy.gz
  AS      arch/arm/boot/compressed/piggy.o
  CC      arch/arm/boot/compressed/misc.o
  AS      arch/arm/boot/compressed/head-sa1100.o
  LD      arch/arm/boot/compressed/vmlinux
Quoted 3 lines

OBJCOPY arch/arm/boot/zImage
Kernel: arch/arm/boot/zImage is ready
-

Missing kernel version and .config file.

In drivers/pcmcia/sa1100_jornada.c, change

int __init pcmcia_jornada720_init(struct device *dev)

to

int __devinit pcmcia_jornada720_init(struct device *dev)

may help. Please test that.

I can't find sa1110_mb_enable().

---
~Randy

#2 lore raw
Quoted 31 lines · On Tue, 23 Oct 2007 11:01:13 -0700 Randy Dunlap <[email protected]> wrote:
Quoted 25 lines · On Tue, 23 Oct 2007 19:52:07 -0700 Kristoffer Ericson wrote:

Best way to handle this?

  LD      init/built-in.o
  LD      .tmp_vmlinux1
  KSYM    .tmp_kallsyms1.S
  AS      .tmp_kallsyms1.o
  LD      .tmp_vmlinux2
  KSYM    .tmp_kallsyms2.S
  AS      .tmp_kallsyms2.o
  LD      vmlinux.o
  MODPOST vmlinux.o
WARNING: vmlinux.o(.text+0x9afc): Section mismatch: reference to .init.text:sa1110_mb_enable (between 'sa1111_probe' and 'sa1111_remove')
WARNING: vmlinux.o(.text+0x13b1ac): Section mismatch: reference to .init.text:pcmcia_jornada720_init (between 'pcmcia_probe' and 'pcmcia_remove')
  LD      vmlinux
  SYSMAP  System.map
  SYSMAP  .tmp_System.map
  OBJCOPY arch/arm/boot/Image
  Kernel: arch/arm/boot/Image is ready
  AS      arch/arm/boot/compressed/head.o
  GZIP    arch/arm/boot/compressed/piggy.gz
  AS      arch/arm/boot/compressed/piggy.o
  CC      arch/arm/boot/compressed/misc.o
  AS      arch/arm/boot/compressed/head-sa1100.o
  LD      arch/arm/boot/compressed/vmlinux
Quoted 3 lines

OBJCOPY arch/arm/boot/zImage
Kernel: arch/arm/boot/zImage is ready
-

Quoted 1 line

Missing kernel version and .config file.

Ah, true. Im using latest git (linux-2.6.git) with proper config. This error has been there for quite some time, just decided it was time to fix it. Im not fully familiar with the section errors, so thought it better to ask.

Quoted 10 lines

In drivers/pcmcia/sa1100_jornada.c, change

int __init pcmcia_jornada720_init(struct device *dev)

to

int __devinit pcmcia_jornada720_init(struct device *dev)

may help. Please test that.

Seems to work fine, big thanks.

Quoted 2 lines

I can't find sa1110_mb_enable().

Found it inside /arch/arm/mach-sa1100/generic.c, proper way to set it as __devinit?

Quoted 3 lines

---
~Randy

#3 lore raw
Quoted 44 lines · On Tue, 23 Oct 2007 20:09:06 -0700 Kristoffer Ericson wrote:
Quoted 31 lines · On Tue, 23 Oct 2007 11:01:13 -0700 Randy Dunlap <[email protected]> wrote:
Quoted 25 lines · On Tue, 23 Oct 2007 19:52:07 -0700 Kristoffer Ericson wrote:

Best way to handle this?

  LD      init/built-in.o
  LD      .tmp_vmlinux1
  KSYM    .tmp_kallsyms1.S
  AS      .tmp_kallsyms1.o
  LD      .tmp_vmlinux2
  KSYM    .tmp_kallsyms2.S
  AS      .tmp_kallsyms2.o
  LD      vmlinux.o
  MODPOST vmlinux.o
WARNING: vmlinux.o(.text+0x9afc): Section mismatch: reference to .init.text:sa1110_mb_enable (between 'sa1111_probe' and 'sa1111_remove')
WARNING: vmlinux.o(.text+0x13b1ac): Section mismatch: reference to .init.text:pcmcia_jornada720_init (between 'pcmcia_probe' and 'pcmcia_remove')
  LD      vmlinux
  SYSMAP  System.map
  SYSMAP  .tmp_System.map
  OBJCOPY arch/arm/boot/Image
  Kernel: arch/arm/boot/Image is ready
  AS      arch/arm/boot/compressed/head.o
  GZIP    arch/arm/boot/compressed/piggy.gz
  AS      arch/arm/boot/compressed/piggy.o
  CC      arch/arm/boot/compressed/misc.o
  AS      arch/arm/boot/compressed/head-sa1100.o
  LD      arch/arm/boot/compressed/vmlinux
Quoted 3 lines

OBJCOPY arch/arm/boot/zImage
Kernel: arch/arm/boot/zImage is ready
-

Quoted 1 line

Missing kernel version and .config file.

Ah, true. Im using latest git (linux-2.6.git) with proper config. This error has been there for quite some time, just decided it was time to fix it. Im not fully familiar with the section errors, so thought it better to ask.

Quoted 7 lines

In drivers/pcmcia/sa1100_jornada.c, change

int __init pcmcia_jornada720_init(struct device *dev)

to

Quoted 7 lines
Quoted 3 lines

int __devinit pcmcia_jornada720_init(struct device *dev)

may help. Please test that.

Seems to work fine, big thanks.

Quoted 2 lines

I can't find sa1110_mb_enable().

Found it inside /arch/arm/mach-sa1100/generic.c, proper way to set it as __devinit?

Probably, at least it's worth trying.

---
~Randy

#4 lore raw
Quoted 48 lines · On Tue, 23 Oct 2007 11:15:06 -0700 Randy Dunlap <[email protected]> wrote:
Quoted 46 lines · On Tue, 23 Oct 2007 20:09:06 -0700 Kristoffer Ericson wrote:
Quoted 31 lines · On Tue, 23 Oct 2007 11:01:13 -0700 Randy Dunlap <[email protected]> wrote:
Quoted 25 lines · On Tue, 23 Oct 2007 19:52:07 -0700 Kristoffer Ericson wrote:

Best way to handle this?

  LD      init/built-in.o
  LD      .tmp_vmlinux1
  KSYM    .tmp_kallsyms1.S
  AS      .tmp_kallsyms1.o
  LD      .tmp_vmlinux2
  KSYM    .tmp_kallsyms2.S
  AS      .tmp_kallsyms2.o
  LD      vmlinux.o
  MODPOST vmlinux.o
WARNING: vmlinux.o(.text+0x9afc): Section mismatch: reference to .init.text:sa1110_mb_enable (between 'sa1111_probe' and 'sa1111_remove')
WARNING: vmlinux.o(.text+0x13b1ac): Section mismatch: reference to .init.text:pcmcia_jornada720_init (between 'pcmcia_probe' and 'pcmcia_remove')
  LD      vmlinux
  SYSMAP  System.map
  SYSMAP  .tmp_System.map
  OBJCOPY arch/arm/boot/Image
  Kernel: arch/arm/boot/Image is ready
  AS      arch/arm/boot/compressed/head.o
  GZIP    arch/arm/boot/compressed/piggy.gz
  AS      arch/arm/boot/compressed/piggy.o
  CC      arch/arm/boot/compressed/misc.o
  AS      arch/arm/boot/compressed/head-sa1100.o
  LD      arch/arm/boot/compressed/vmlinux
Quoted 3 lines

OBJCOPY arch/arm/boot/zImage
Kernel: arch/arm/boot/zImage is ready
-

Quoted 1 line

Missing kernel version and .config file.

Ah, true. Im using latest git (linux-2.6.git) with proper config. This error has been there for quite some time, just decided it was time to fix it. Im not fully familiar with the section errors, so thought it better to ask.

Quoted 9 lines

In drivers/pcmcia/sa1100_jornada.c, change

int __init pcmcia_jornada720_init(struct device *dev)

to

int __devinit pcmcia_jornada720_init(struct device *dev)

Quoted 7 lines
Quoted 5 lines
Quoted 1 line

may help. Please test that.

Seems to work fine, big thanks.

Quoted 2 lines

I can't find sa1110_mb_enable().

Found it inside /arch/arm/mach-sa1100/generic.c, proper way to set it as __devinit?

Probably, at least it's worth trying.

Seems to have worked fine. Could anyone explain why?.. Or I can google it I guess. Anyhow big thanx Randy

Quoted 8 lines

---
~Randy
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

#5 lore raw
Quoted 52 lines · On Tue, 23 Oct 2007 20:20:20 -0700 Kristoffer Ericson wrote:
Quoted 49 lines · On Tue, 23 Oct 2007 11:15:06 -0700 Randy Dunlap <[email protected]> wrote:
Quoted 47 lines · On Tue, 23 Oct 2007 20:09:06 -0700 Kristoffer Ericson wrote:
Quoted 31 lines · On Tue, 23 Oct 2007 11:01:13 -0700 Randy Dunlap <[email protected]> wrote:
Quoted 25 lines · On Tue, 23 Oct 2007 19:52:07 -0700 Kristoffer Ericson wrote:

Best way to handle this?

  LD      init/built-in.o
  LD      .tmp_vmlinux1
  KSYM    .tmp_kallsyms1.S
  AS      .tmp_kallsyms1.o
  LD      .tmp_vmlinux2
  KSYM    .tmp_kallsyms2.S
  AS      .tmp_kallsyms2.o
  LD      vmlinux.o
  MODPOST vmlinux.o
WARNING: vmlinux.o(.text+0x9afc): Section mismatch: reference to .init.text:sa1110_mb_enable (between 'sa1111_probe' and 'sa1111_remove')
WARNING: vmlinux.o(.text+0x13b1ac): Section mismatch: reference to .init.text:pcmcia_jornada720_init (between 'pcmcia_probe' and 'pcmcia_remove')
  LD      vmlinux
  SYSMAP  System.map
  SYSMAP  .tmp_System.map
  OBJCOPY arch/arm/boot/Image
  Kernel: arch/arm/boot/Image is ready
  AS      arch/arm/boot/compressed/head.o
  GZIP    arch/arm/boot/compressed/piggy.gz
  AS      arch/arm/boot/compressed/piggy.o
  CC      arch/arm/boot/compressed/misc.o
  AS      arch/arm/boot/compressed/head-sa1100.o
  LD      arch/arm/boot/compressed/vmlinux
Quoted 3 lines

OBJCOPY arch/arm/boot/zImage
Kernel: arch/arm/boot/zImage is ready
-

Quoted 1 line

Missing kernel version and .config file.

Ah, true. Im using latest git (linux-2.6.git) with proper config. This error has been there for quite some time, just decided it was time to fix it. Im not fully familiar with the section errors, so thought it better to ask.

Quoted 10 lines

In drivers/pcmcia/sa1100_jornada.c, change

int __init pcmcia_jornada720_init(struct device *dev)

to

int __devinit pcmcia_jornada720_init(struct device *dev)

may help. Please test that.

Quoted 8 lines
Quoted 6 lines
Quoted 4 lines

Seems to work fine, big thanks.

Quoted 2 lines

I can't find sa1110_mb_enable().

Found it inside /arch/arm/mach-sa1100/generic.c, proper way to set it as __devinit?

Probably, at least it's worth trying.

Seems to have worked fine. Could anyone explain why?.. Or I can google it I guess. Anyhow big thanx Randy

You have CONFIG_HOTPLUG=y in your .config file?

If yes, see what that does to include/linux/init.h:

#ifdef CONFIG_HOTPLUG
#define __devinit
#define __devinitdata
#define __devexit
#define __devexitdata
#else
#define __devinit __init
#define __devinitdata __initdata
#define __devexit __exit
#define __devexitdata __exitdata
#endif

so those __devinit functions are not discarded when CONFIG_HOTPLUG=y, but they are discarded when CONFIG_HOTPLUG=n.

---
~Randy

#6 lore raw
Quoted 80 lines · On Tue, 23 Oct 2007 11:30:01 -0700 Randy Dunlap <[email protected]> wrote:
Quoted 52 lines · On Tue, 23 Oct 2007 20:20:20 -0700 Kristoffer Ericson wrote:
Quoted 49 lines · On Tue, 23 Oct 2007 11:15:06 -0700 Randy Dunlap <[email protected]> wrote:
Quoted 47 lines · On Tue, 23 Oct 2007 20:09:06 -0700 Kristoffer Ericson wrote:
Quoted 31 lines · On Tue, 23 Oct 2007 11:01:13 -0700 Randy Dunlap <[email protected]> wrote:
Quoted 25 lines · On Tue, 23 Oct 2007 19:52:07 -0700 Kristoffer Ericson wrote:

Best way to handle this?

  LD      init/built-in.o
  LD      .tmp_vmlinux1
  KSYM    .tmp_kallsyms1.S
  AS      .tmp_kallsyms1.o
  LD      .tmp_vmlinux2
  KSYM    .tmp_kallsyms2.S
  AS      .tmp_kallsyms2.o
  LD      vmlinux.o
  MODPOST vmlinux.o
WARNING: vmlinux.o(.text+0x9afc): Section mismatch: reference to .init.text:sa1110_mb_enable (between 'sa1111_probe' and 'sa1111_remove')
WARNING: vmlinux.o(.text+0x13b1ac): Section mismatch: reference to .init.text:pcmcia_jornada720_init (between 'pcmcia_probe' and 'pcmcia_remove')
  LD      vmlinux
  SYSMAP  System.map
  SYSMAP  .tmp_System.map
  OBJCOPY arch/arm/boot/Image
  Kernel: arch/arm/boot/Image is ready
  AS      arch/arm/boot/compressed/head.o
  GZIP    arch/arm/boot/compressed/piggy.gz
  AS      arch/arm/boot/compressed/piggy.o
  CC      arch/arm/boot/compressed/misc.o
  AS      arch/arm/boot/compressed/head-sa1100.o
  LD      arch/arm/boot/compressed/vmlinux
Quoted 3 lines

OBJCOPY arch/arm/boot/zImage
Kernel: arch/arm/boot/zImage is ready
-

Quoted 1 line

Missing kernel version and .config file.

Ah, true. Im using latest git (linux-2.6.git) with proper config. This error has been there for quite some time, just decided it was time to fix it. Im not fully familiar with the section errors, so thought it better to ask.

Quoted 10 lines

In drivers/pcmcia/sa1100_jornada.c, change

int __init pcmcia_jornada720_init(struct device *dev)

to

int __devinit pcmcia_jornada720_init(struct device *dev)

may help. Please test that.

Quoted 8 lines
Quoted 6 lines
Quoted 4 lines

Seems to work fine, big thanks.

Quoted 2 lines

I can't find sa1110_mb_enable().

Found it inside /arch/arm/mach-sa1100/generic.c, proper way to set it as __devinit?

Probably, at least it's worth trying.

Seems to have worked fine. Could anyone explain why?.. Or I can google it I guess. Anyhow big thanx Randy

You have CONFIG_HOTPLUG=y in your .config file?

If yes, see what that does to include/linux/init.h:

#ifdef CONFIG_HOTPLUG
#define __devinit
#define __devinitdata
#define __devexit
#define __devexitdata
#else
#define __devinit __init
#define __devinitdata __initdata
#define __devexit __exit
#define __devexitdata __exitdata
#endif

Quoted 2 lines

so those __devinit functions are not discarded when CONFIG_HOTPLUG=y, but they are discarded when CONFIG_HOTPLUG=n.

I got CONFIG_HOTPLUG = y, so should be alright then.

Quoted 4 lines

---
~Randy