53c7xx removal fallout

index f2d658a..c09a96b 100644
@@ -46,8 +46,6 @@
 .mailmap
 .mm
 53c700_d.h
-53c7xx_d.h
-53c7xx_u.h
 53c8xx_d.h*
 BitKeeper
 COPYING

66 lines not on this page · raw message

index aa1f7e9..c2e18e1 100644
@@ -64,8 +64,6 @@ lpfc.txt
 	- LPFC driver release notes
 megaraid.txt
 	- Common Management Module, shared code handling ioctls for LSI drivers
-ncr53c7xx.txt
-	- info on driver for NCR53c7xx based adapters
 ncr53c8xx.txt
 	- info on driver for NCR53c8xx based adapters
 osst.txt

deleted file mode 100644
index 91e9552..0000000
@@ -1,40 +0,0 @@
-README for WarpEngine/A4000T/A4091 SCSI kernels.
-
-Use the following options to disable options in the SCSI driver.
-
-Using amiboot for example.....
-
-To disable Synchronous Negotiation....
-
-	amiboot -k kernel 53c7xx=nosync:0	
-
-To disable Disconnection....
-	
-	amiboot -k kernel 53c7xx=nodisconnect:0
-
-To disable certain SCSI devices...
-
-	amiboot -k kernel 53c7xx=validids:0x3F
-
-	this allows only device ID's 0,1,2,3,4 and 5 for linux to handle.
-	(this is a bitmasked field - i.e. each bit represents a SCSI ID)
-
-These commands work on a per controller basis and use the option 'next' to
-move to the next controller in the system.
-
-e.g.
-	amiboot -k kernel 53c7xx=nodisconnect:0,next,nosync:0
-
-	this uses No Disconnection on the first controller and Asynchronous
-	SCSI on the second controller.
-
-Known Issues:
-
-Two devices are known not to function with the default settings of using
-synchronous SCSI. These are the Archive Viper 150 Tape Drive and the 
-SyQuest SQ555 removeable hard drive. When using these devices on a controller
-use the 'nosync:0' option.
-
-Please try these options and post any problems/successes to me.
-
-Alan Hourihane <[email protected]>

index b385af3..c89ae9a 100644
@@ -1,3 +1 @@
 53c700_d.h
-53c7xx_d.h
-53c7xx_u.h