Huawei E220 and usb storage
Subsystems (2)
Dear all,
I recently got an Huawei E220 usb modem. Reading a bit on the net I found that:
The Huaweii E220 modem is a composite USB device: in fact it acts like a mass storage device, and also as three serial communication ports. The Linux's developers dealt with this ignoring the mass device storage (which is a read-only mass storage, i.e. a CD-ROM with preload software only for Windows). For more information see
http://www.kernel.org/pub/linux/kernel/v2.6/testing/ChangeLog-2.6.20-rc2 or
http://lwn.net/Articles/220545/ where you read the changelog for 2.6.20 linux kernel. The interesting part is reported here below:
[...]
Johann Wilhelm (2): usb-storage: Ignore the virtual cd-drive of the Huawei E220 USB Modem usb-gsm-driver: Added VendorId and ProductId for Huawei E220 USB Modem
[...]
This modification is present from Linux kernel 2.6.20 and more recent ones.
See: http://ske.sourceforge.net/html/projects/huawei/huawei_tre.html
Now that I plug my modem I definitely get this usb storage device, and I need to call a special program to switch to the other mode (huaweiAktBbo, from
http://www.kanoistika.sk/bobovsky/archiv/umts/huaweiAktBbo.c).
Several pages on the web state that it should work *without* this switch program.
Is this a regression from 2.6.20, or is it supposed to work?
Thanks a lot and all the best
Norbert
-------------------------------------------------------------------------------
Dr. Norbert Preining <[email protected]> Vienna University of Technology
Debian Developer <[email protected]> Debian TeX Group
gpg DSA: 0x09C5B094 fp: 14DF 2E6C 0307 BE6D AD76 A9C0 D2BF 4AA3 09C5 B094
-------------------------------------------------------------------------------
DEAL (n.)
The gummy substance found between damp toes.
--- Douglas Adams, The Meaning of Liff
Greetings,
Im using a Huawei E220 USB modem, currently running 2.6.22.5 vanilla kernel. It has worked fine for me since 2.6.21. The lights give you a hint what mode its in. Green = usb_storage, Dark-blue = MODEM_slow, bright-blue = MODEM_fast (3G).
If the light is green after reboot, I need to reboot again until it turns blue. I know this sucks, but just something I've noticed.
One hint is to put the USB modem as static in kernel and usb_storage as module.
Best wishes
Kristoffer Ericson
Quoted 52 lines · On Tue, 30 Oct 2007 20:09:45 +0100 Norbert Preining <[email protected]> wrote:
Dear all,
I recently got an Huawei E220 usb modem. Reading a bit on the net I found that:
The Huaweii E220 modem is a composite USB device: in fact it acts like a mass storage device, and also as three serial communication ports. The Linux's developers dealt with this ignoring the mass device storage (which is a read-only mass storage, i.e. a CD-ROM with preload software only for Windows). For more information see
http://www.kernel.org/pub/linux/kernel/v2.6/testing/ChangeLog-2.6.20-rc2 or
http://lwn.net/Articles/220545/ where you read the changelog for 2.6.20 linux kernel. The interesting part is reported here below:[...]
Johann Wilhelm (2): usb-storage: Ignore the virtual cd-drive of the Huawei E220 USB Modem usb-gsm-driver: Added VendorId and ProductId for Huawei E220 USB Modem
[...]This modification is present from Linux kernel 2.6.20 and more recent ones.
See: http://ske.sourceforge.net/html/projects/huawei/huawei_tre.html
Now that I plug my modem I definitely get this usb storage device, and I need to call a special program to switch to the other mode (huaweiAktBbo, from
http://www.kanoistika.sk/bobovsky/archiv/umts/huaweiAktBbo.c).Several pages on the web state that it should work *without* this switch program.
Is this a regression from 2.6.20, or is it supposed to work?
Thanks a lot and all the best
Norbert
-------------------------------------------------------------------------------
Dr. Norbert Preining <[email protected]> Vienna University of Technology
Debian Developer <[email protected]> Debian TeX Group
gpg DSA:0x09C5B094fp: 14DF 2E6C 0307 BE6D AD76 A9C0 D2BF 4AA3 09C5 B094
-------------------------------------------------------------------------------
DEAL (n.)
The gummy substance found between damp toes.
--- Douglas Adams, The Meaning of Liff
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Hi Kristoffer,
thanks for the feedback.
Quoted 1 line · Kristoffer Ericson
Im using a Huawei E220 USB modem, currently running 2.6.22.5 vanilla kernel. It has worked fine for me since 2.6.21.
Strange. I rebuilt the kernel, compiled the usb serial and options into the kernel, while leaving usb-storage as module. Still I have to issue the huaweiAktBbo program to get it working/switching into the *right* modus.
Quoted 1 line
The lights give you a hint what mode its in. Green =
usb_storage, Dark-blue =MODEM_slow, bright-blue =MODEM_fast(3G).
BTW, I have seen a slightly different pattern: Green blinking from the beginning
calling huaweiAktBbo to make the switch
still blinking green
calling the internet provider
when the connection is established (on the hardware level, not on ip level) the modem starts blinking blue and then solid blue turning off the ppp connection it goes into blinking blue mode
Quoted 1 line
If the light is green after reboot, I need to reboot again until it turns blue. I know this sucks, but just something I've noticed.
Probably you could use the huaweiAktBbo program for this, too.
Best wishes
Norbert
-------------------------------------------------------------------------------
Dr. Norbert Preining <[email protected]> Vienna University of Technology
Debian Developer <[email protected]> Debian TeX Group
gpg DSA: 0x09C5B094 fp: 14DF 2E6C 0307 BE6D AD76 A9C0 D2BF 4AA3 09C5 B094
-------------------------------------------------------------------------------
HASELBURY PLUCKNETT (n.)
A mechanical device for cleaning combs invented during the industrial revolution at the same time as Arkwright's Spinning Jenny, but which didn't catch on in the same way.
--- Douglas Adams, The Meaning of Liff
Quoted 4 lines · Norbert Preining
Hi Kristoffer,
thanks for the feedback.
Quoted 8 lines
Quoted 1 line · Kristoffer Ericson
Im using a Huawei E220 USB modem, currently running 2.6.22.5 vanilla kernel. It has worked fine for me since 2.6.21.
Strange. I rebuilt the kernel, compiled the usb serial and options into the kernel, while leaving usb-storage as module. Still I have to issue the huaweiAktBbo program to get it working/switching into the *right* modus.
Did you see commit d853d872c14b9adc4adad29e56cd378b291f86e0 ?
Quoted 1 line · Chuck Ebbert
Did you see commit
d853d872c14b9adc4adad29e56cd378b291f86e0?
No, where can I see that one?
I tried the attached patch which I found on the usb list, but it didn't work, the cdrom was still always found, and it was connected/disconnected permanently. Currently I was at:
...
Oct 30 22:20:32 mithrandir kernel: usb 2-2: new full speed USB device using uhci_hcd and address 13 Oct 30 22:20:32 mithrandir kernel: usb 2-2: configuration #1 chosen from 1 choice Oct 30 22:20:32 mithrandir kernel: usb-storage: probe of 2-2:1.0 failed with error -5 Oct 30 22:20:32 mithrandir kernel: option 2-2:1.0: GSM modem (1-port) converter detected Oct 30 22:20:32 mithrandir kernel: usb 2-2: GSM modem (1-port) converter now attached to ttyUSB0 Oct 30 22:20:32 mithrandir kernel: usb-storage: probe of 2-2:1.1 failed with error -5 Oct 30 22:20:32 mithrandir kernel: option 2-2:1.1: GSM modem (1-port) converter detected Oct 30 22:20:32 mithrandir kernel: usb 2-2: GSM modem (1-port) converter now attached to ttyUSB1 Oct 30 22:20:32 mithrandir kernel: scsi35 : SCSI emulation for USB Mass Storage devices
Note the SCSI35 !!!
So is there any other patch I can try?
Best wishes
Norbert
-------------------------------------------------------------------------------
Dr. Norbert Preining <[email protected]> Vienna University of Technology
Debian Developer <[email protected]> Debian TeX Group
gpg DSA: 0x09C5B094 fp: 14DF 2E6C 0307 BE6D AD76 A9C0 D2BF 4AA3 09C5 B094
-------------------------------------------------------------------------------
BARSTIBLEY
A humorous device such as a china horse or small naked porcelain infant which jocular hosts use of piss water into your Scotch with.
--- Douglas Adams, The Meaning of Liff
drivers/usb/storage/initializers.c renamed from drivers/usb/storage/initializers.c.orig +11 -0
@@ -90,3 +90,14 @@return (res ?-1 :0 ); } + +/* This places the HUAWEI E220 devices in multi-port mode */ +int usb_stor_switch_ports_init (struct us_data *us) +{ + us->iobuf[0 ] =0x1 ; + (void )usb_control_msg (us->pusb_dev,usb_sndctrlpipe (us->pusb_dev,0 ), +USB_REQ_SET_FEATURE ,USB_TYPE_STANDARD |USB_RECIP_DEVICE , +0x01 ,0x0 , us->iobuf,0x1 ,1000 ); +return 0 ; +} +
drivers/usb/storage/initializers.h renamed from drivers/usb/storage/initializers.h.orig +3 -0
@@ -47,3 +47,6 @@/* This function is required to activate all four slots on the UCR-61S2B * flash reader */ int usb_stor_ucr61s2b_init (struct us_data *us); + +/* This places the HUAWEI E220 devices in multi-port mode */ +int usb_stor_switch_ports_init (struct us_data *us);
drivers/usb/storage/unusual_devs.h renamed from drivers/usb/storage/unusual_devs.h.orig +10 -0
@@ -1463,6 +1463,16 @@ US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE ), +/* This tells the usb driver to place the HUAWEI E220 devices into multi-port mode +* Reported by fangxiaozhi <[email protected]> +* and by linlei <[email protected]> +*/ +UNUSUAL_DEV (0x12d1 ,0x1003 ,0x0000 ,0x0000 , +"HUAWEI" , +"HUAWEI MOBILE Mass Storage" , +US_SC_DEVICE ,US_PR_DEVICE , usb_stor_switch_ports_init, +0 ), +/* Reported by Vilius Bilinkevicius <vilisas AT xxx DOT lt) */ UNUSUAL_DEV( 0x132b, 0x000b, 0x0001, 0x0001, "Minolta",
Quoted 3 lines · Norbert Preining
I tried the attached patch which I found on the usb list, but it didn't work, the cdrom was still always found, and it was connected/disconnected permanently.
The difference with huaweiAktBbo.c seems that kernel uses a nonzero length. Can you try zero length with the kernel? It's the second argument to the last.
-- Pete
Quoted 2 lines · Pete Zaitcev
The difference with
huaweiAktBbo.cseems that kernel uses a nonzero length. Can you try zero length with the kernel? It's the second argument to the last.
I tried with the git patch plus changing the penultimage argument from 0x1 to 0.
The switch of the modem is still not done automatically, but calling huaweiAktBbo does effect the switch.
In my tests I did NOT reboot since usb-storage was compiled as module (usbserial and option fix in the kernel). But I made sure that I loaded the right (the module with the patched code) after removing the old one.
Best wishes
Norbert
-------------------------------------------------------------------------------
Dr. Norbert Preining <[email protected]> Vienna University of Technology
Debian Developer <[email protected]> Debian TeX Group
gpg DSA: 0x09C5B094 fp: 14DF 2E6C 0307 BE6D AD76 A9C0 D2BF 4AA3 09C5 B094
-------------------------------------------------------------------------------
GALASHIELS (pl.n.)
A form of particularly long sparse sideburns which are part of the mandatory uniform of British Rail guards.
--- Douglas Adams, The Meaning of Liff
Quoted 6 lines · preining
Quoted 2 lines · Pete Zaitcev
The difference with
huaweiAktBbo.cseems that kernel uses a nonzero length. Can you try zero length with the kernel? It's the second argument to the last.I tried with the git patch plus changing the penultimage argument from
0x1to 0.
Hmm, in addition I added a
printk(KERN_ERR "ENTERING usb_stor_huawei_e220_init!\n");
at the beginning of the function but it never showed up in my log files. So it seems that the UNUSUAL_DEV entry does not match.
Best wishes
Norbert
-------------------------------------------------------------------------------
Dr. Norbert Preining <[email protected]> Vienna University of Technology
Debian Developer <[email protected]> Debian TeX Group
gpg DSA: 0x09C5B094 fp: 14DF 2E6C 0307 BE6D AD76 A9C0 D2BF 4AA3 09C5 B094
-------------------------------------------------------------------------------
TIDPIT (n.)
The corner of a toenail from which satisfying little black deposits may be sprung.
--- Douglas Adams, The Meaning of Liff
Quoted 4 lines · Norbert Preining
Hmm, in addition I added a
printk(KERN_ERR "ENTERING usb_stor_huawei_e220_init!\n");at the beginning of the function but it never showed up in my log files. So it seems that the
UNUSUAL_DEVentry does not match.
This doesn't seem to be possible, considering the /proc/bus/usb/devices that you posted. I would rather suspect that you forgot to perform some step in your kernel installation, and end using a stale usb-storage module.
-- Pete
Quoted 4 lines · Pete Zaitcev
This doesn't seem to be possible, considering the
/proc/bus/usb/devicesthat you posted. I would rather suspect that you forgot to perform some step in your kernel installation, and end using a stale usb-storage module.
No.
$ uname -r 2.6.23 $ cd /lib/modules/2.6.23 $ find . -name usb-storage.ko ./kernel/drivers/usb/storage/usb-storage.ko $ strings ./kernel/drivers/usb/storage/usb-storage.ko | grep -i huawei_e22a <3>ENTERING usb_stor_huawei_e220_init! $
So it is there ... and it is the only module.
Best wishes
Norbert
-------------------------------------------------------------------------------
Dr. Norbert Preining <[email protected]> Vienna University of Technology
Debian Developer <[email protected]> Debian TeX Group
gpg DSA: 0x09C5B094 fp: 14DF 2E6C 0307 BE6D AD76 A9C0 D2BF 4AA3 09C5 B094
-------------------------------------------------------------------------------The first ten million years were the worst,' said Marvin, and the second ten million, they were the worst too. The third ten million I didn't enjoy at all. After that I went into a bit of a decline.'
--- Marvin reflecting back on his 576,000,003,579 year --- career as Milliways' car park attendent. --- Douglas Adams, The Hitchhikers Guide to the Galaxy
Quoted 6 lines · Pete Zaitcev
Quoted 3 lines
printk(KERN_ERR "ENTERING usb_stor_huawei_e220_init!\n");at the beginning of the function but it never showed up in my log files. So it seems that the
UNUSUAL_DEVentry does not match.This doesn't seem to be possible, considering the
/proc/bus/usb/devicesthat you posted. I would rather suspect that you forgot to perform
Compiling both -- usb-storage and option/usb-serial -- as modules did work.
Ok, thanks a lot.
I assume that is because the built-in usb-serial/option did grab the device so the init function wasn't executed. Putting both into modules allowed that usb-storage grabbed the device first.
Anyway, my interpretation without any knowledge.
Best wishes
Norbert
-------------------------------------------------------------------------------
Dr. Norbert Preining <[email protected]> Vienna University of Technology
Debian Developer <[email protected]> Debian TeX Group
gpg DSA: 0x09C5B094 fp: 14DF 2E6C 0307 BE6D AD76 A9C0 D2BF 4AA3 09C5 B094
-------------------------------------------------------------------------------
SCONSER (n.)
A person who looks around then when talking to you, to see if there's anyone more interesting about.
--- Douglas Adams, The Meaning of Liff
Dear Pete, dear all,
Quoted 6 lines · preining
Quoted 2 lines · Pete Zaitcev
The difference with
huaweiAktBbo.cseems that kernel uses a nonzero length. Can you try zero length with the kernel? It's the second argument to the last.I tried with the git patch plus changing the penultimage argument from
0x1to 0.
Ok, did new tests with 2.6.24-rc2:
- with plain kernel the usb-storage modules attaches and detaches permanently a virtual cd drive, I stopped after 30+ iterations.
- changing the penultimage argument in the usb_stor_huawei_e220_init function from 0x1 to 0 stopped this misbehaviour, but
- with the change from 0x1 to 0 the initialization works automatically.
Can we place change this 0x1 to 0?
Best wishes
Norbert
-------------------------------------------------------------------------------
Dr. Norbert Preining <[email protected]> Vienna University of Technology
Debian Developer <[email protected]> Debian TeX Group
gpg DSA: 0x09C5B094 fp: 14DF 2E6C 0307 BE6D AD76 A9C0 D2BF 4AA3 09C5 B094
-------------------------------------------------------------------------------
MOLESBY (n.)
The kind of family that drives to the seaside and then sits in the car with all the windows closed, reading the Sunday Express and wearing sidcups (q.v.)
--- Douglas Adams, The Meaning of Liff
Quoted 9 lines · Norbert Preining
Quoted 5 lines
Quoted 2 lines
The difference with
huaweiAktBbo.cseems that kernel uses a nonzero length. Can you try zero length with the kernel? It's the second argument to the last.I tried with the git patch plus changing the penultimage argument from
0x1to 0.Ok, did new tests with 2.6.24-rc2:
- with plain kernel the usb-storage modules attaches and detaches permanently a virtual cd drive, I stopped after 30+ iterations.
It looks like between Dave Russel and I, we hit the same problem that you did, after taking care of detection and initialization. Look at his dmesg in comment #44 in this:
https://bugzilla.redhat.com/show_bug.cgi?id=253096#c44
Quoted 4 lines
- changing the penultimage argument in the
usb_stor_huawei_e220_initfunction from0x1to 0 stopped this misbehaviour, but- with the change from
0x1to 0 the initialization works automatically.
I may be able to test this.
As you recall, Huawei people themselves suggested nonzero length, this is why we didn't want to change it. But perhaps they are mistaken about the operation of their own hardware. Stranger things happened...
-- Pete
Quoted 2 lines · Pete Zaitcev
that you did, after taking care of detection and initialization. Look at his dmesg in comment #44 in this:
Yes, that looks very similar.
Quoted 6 lines
Quoted 4 lines
- changing the penultimage argument in the
usb_stor_huawei_e220_initfunction from0x1to 0 stopped this misbehaviour, but- with the change from
0x1to 0 the initialization works automatically.I may be able to test this.
I test it regularly, last with 2.6.25-rc1, and it works, always. Maybe it is not the optimal solution, but who knows.
Quoted 1 line
As you recall, Huawei people themselves suggested nonzero length,
Umpf, ahhaaaa, very interesting.
Best wishes
Norbert
-------------------------------------------------------------------------------
Dr. Norbert Preining <[email protected]> Vienna University of Technology
Debian Developer <[email protected]> Debian TeX Group
gpg DSA: 0x09C5B094 fp: 14DF 2E6C 0307 BE6D AD76 A9C0 D2BF 4AA3 09C5 B094
-------------------------------------------------------------------------------
Serious error.
All shortcuts have disappeared.
Screen.
Mind.
Both are blank.
--- Windows Error Haiku
Quoted 4 lines · Norbert Preining
Quoted 2 lines
that you did, after taking care of detection and initialization. Look at his dmesg in comment #44 in this:
Yes, that looks very similar.
Someone reported on the bug that a firmware update exists to resolve the issue (version 11.117.07.00.67). Probably they started to comply with the spec and return 12 bytes of sense according to the allocation length in the SCSI command.
https://bugzilla.redhat.com/show_bug.cgi?id=253096#c51
-- Pete
Quoted 2 lines · Pete Zaitcev
Someone reported on the bug that a firmware update exists to resolve the issue (version 11.117.07.00.67). Probably they started to comply
But where do I get this firmware update? I searched the huawei web site, registered, bid couldn't find anything... any hints?
Best wishes
Norbert
-------------------------------------------------------------------------------
Dr. Norbert Preining <[email protected]> Vienna University of Technology
Debian Developer <[email protected]> Debian TeX Group
gpg DSA: 0x09C5B094 fp: 14DF 2E6C 0307 BE6D AD76 A9C0 D2BF 4AA3 09C5 B094
-------------------------------------------------------------------------------
GRIMMET (n.)
A small bush from which cartoon characters dangle over the edge of a cliff.
--- Douglas Adams, The Meaning of Liff
Quoted 1 line · Chuck Ebbert
Did you see commit
d853d872c14b9adc4adad29e56cd378b291f86e0?
2.6.23 + this commit exhibits the same problems I describe before ... permanent disconnect/connect problems. Not even using the mentioned program does switch the usb modem into the right mode.
So this patch seems to be bogus...
Best wishes
Norbert
-------------------------------------------------------------------------------
Dr. Norbert Preining <[email protected]> Vienna University of Technology
Debian Developer <[email protected]> Debian TeX Group
gpg DSA: 0x09C5B094 fp: 14DF 2E6C 0307 BE6D AD76 A9C0 D2BF 4AA3 09C5 B094
-------------------------------------------------------------------------------
HEVER (n.)
The panic caused by half-hearing Tannoy in an airport.
--- Douglas Adams, The Meaning of Liff
Quoted 12 lines · On Tue, 30 Oct 2007 21:47:20 +0100 Norbert Preining <[email protected]> wrote:
Hi Kristoffer,
thanks for the feedback.
Quoted 1 line · Kristoffer Ericson
Im using a Huawei E220 USB modem, currently running 2.6.22.5 vanilla kernel. It has worked fine for me since 2.6.21.
Strange. I rebuilt the kernel, compiled the usb serial and options into the kernel, while leaving usb-storage as module. Still I have to issue the huaweiAktBbo program to get it working/switching into the *right* modus.
Quoted 4 lines
Quoted 1 line
The lights give you a hint what mode its in. Green =
usb_storage, Dark-blue =MODEM_slow, bright-blue =MODEM_fast(3G).BTW, I have seen a slightly different pattern: Green blinking from the beginning
I get green blinking up to udev, then it turns into dark blue.
Quoted 7 lines
calling huaweiAktBbo to make the switch
still blinking green
calling the internet provider
when the connection is established (on the hardware level, not on ip level) the modem starts blinking blue and then solid blue turning off the ppp connection it goes into blinking blue mode
I have no experience with huewaiAktBbo, I just use wvdial, works nicely. Solid color also symbolises "Established mode" for me.
Quoted 4 lines
Quoted 1 line
If the light is green after reboot, I need to reboot again until it turns blue. I know this sucks, but just something I've noticed.
Probably you could use the huaweiAktBbo program for this, too.
I've noticed that it depends on the USB host somehow. On my laptop I need to restart 3 times before it will go into "blue mode" properly. On my primary PC though, it always works right away. No idea why and haven't had the time to bugtrack it.
Quoted 14 lines
Best wishes
Norbert
-------------------------------------------------------------------------------
Dr. Norbert Preining <[email protected]> Vienna University of Technology
Debian Developer <[email protected]> Debian TeX Group
gpg DSA:0x09C5B094fp: 14DF 2E6C 0307 BE6D AD76 A9C0 D2BF 4AA3 09C5 B094
-------------------------------------------------------------------------------
HASELBURY PLUCKNETT (n.)
A mechanical device for cleaning combs invented during the industrial revolution at the same time as Arkwright's Spinning Jenny, but which didn't catch on in the same way.
--- Douglas Adams, The Meaning of Liff
Quoted 1 line · Norbert Preining
Is this a regression from 2.6.20, or is it supposed to work?
Please post your /proc/bus/usb/devices. Maybe it just fails to match.
-- Pete
Quoted 1 line · Pete Zaitcev
Please post your
/proc/bus/usb/devices. Maybe it just fails to match.
Here is the relevant part:
T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 25 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=12d1 ProdID=1003 Rev= 0.00 S: Manufacturer=HUAWEI Technologies S: Product=HUAWEI Mobile C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
The VendorID and ProductID do match, the strings seem to be different (HUAWEI MOBILE in the patch, in the usb/devices "HUAWEI Mobile")., but I don't know what counts here.
Best wishes
Norbert
-------------------------------------------------------------------------------
Dr. Norbert Preining <[email protected]> Vienna University of Technology
Debian Developer <[email protected]> Debian TeX Group
gpg DSA: 0x09C5B094 fp: 14DF 2E6C 0307 BE6D AD76 A9C0 D2BF 4AA3 09C5 B094
-------------------------------------------------------------------------------
TINGRITH (n.)
The feeling of silver paper against your fillings.
--- Douglas Adams, The Meaning of Liff