Skip to contentSkip to conversation

PATCH: PR Input Devives/2082: PS/2 mouse out of sync after switching with KVM switch

PATCH H.J. Lu 2 participants 3 messages Oct 30, 2007 Input drivers

lore
Share & tools
lore

H.J. Lu

author
#0 lore raw

The bug report is at

http://bugzilla.kernel.org/show_bug.cgi?id=2082

Problem Description: When switching to another machine with a KVM switch and back, the mouse is out of control, with X.Org. To recover,
I have to unplug the mouse cable and plug it back.

Steps to reproduce: Have a wheel mouse connected and X.Org. Keyboard, Mouse and Video are connected to a KVM switch. Switch to another machine and back. You have lost the usage of wheel on mouse.

This patch for 2.6.23 tries to reconnect the mouse after KVM switch. It doesn't completely solve the problem. Mouse still got a few random bytes after KVM switch. But it recovers with kernel message:

psmouse.c: Wheel Mouse at isa0060/serio1/input0 lost synchronization, issuing reconnect request.

instead of

psmouse.c: Wheel Mouse at isa0060/serio1/input0 lost synchronization, throwing 3 bytes away.

and never recovering from it.

BTW, please CC me when reply. Thanks.

H.J.
----

drivers/input/mouse/psmouse-base.c renamed from drivers/input/mouse/psmouse-base.c.reset +4 -4
@@ -302,11 +302,11 @@ static irqreturn_t psmouse_interrupt(str
 
 	if (psmouse->state == PSMOUSE_ACTIVATED &&
 	    psmouse->pktcnt && time_after(jiffies, psmouse->last + HZ/2)) {
-		printk(KERN_INFO "psmouse.c: %s at %s lost synchronization, throwing %d bytes away.\n",
-		       psmouse->name, psmouse->phys, psmouse->pktcnt);
+		printk(KERN_INFO "psmouse.c: %s at %s lost synchronization, issuing reconnect request.\n",
+		       psmouse->name, psmouse->phys);
 		psmouse->badbyte = psmouse->packet[0];
-		__psmouse_set_state(psmouse, PSMOUSE_RESYNCING);
-		queue_work(kpsmoused_wq, &psmouse->resync_work);
+		__psmouse_set_state(psmouse, PSMOUSE_IGNORE);
+		serio_reconnect(psmouse->ps2dev.serio);
 		goto out;
 	}
 
maintainer
#1 lore raw

Hi,

Quoted 8 lines · H.J. Lu

The bug report is at

http://bugzilla.kernel.org/show_bug.cgi?id=2082

Problem Description: When switching to another machine with a KVM switch and back, the mouse is out of control, with X.Org. To recover,
I have to unplug the mouse cable and plug it back.

Quoted 7 lines

Steps to reproduce: Have a wheel mouse connected and X.Org. Keyboard, Mouse and Video are connected to a KVM switch. Switch to another machine and back. You have lost the usage of wheel on mouse.

This patch for 2.6.23 tries to reconnect the mouse after KVM switch. It doesn't completely solve the problem. Mouse still got a few random bytes after KVM switch.

Have you tried psmouse.resync_time=5 option?

Any change you coudl do

echo 1 > /sys/module/i8042/parameters/debug

before switrching KVM back and forth and send me dmesg?

Quoted 10 lines

But it recovers with kernel message:

psmouse.c: Wheel Mouse at isa0060/serio1/input0 lost synchronization, issuing reconnect request.

instead of

psmouse.c: Wheel Mouse at isa0060/serio1/input0 lost synchronization, throwing 3 bytes away.

and never recovering from it.

I am hesitant queuing reconnect immediately - if the byte was delayed because embedded controller was busy doing something else and we start querying mouse at the wrong time we might lose mouse altogether.

Signature · 1 line
Dmitry
author
#2 lore raw
Quoted 15 lines · Dmitry Torokhov

Hi,

Quoted 12 lines · H.J. Lu

The bug report is at

http://bugzilla.kernel.org/show_bug.cgi?id=2082

Problem Description: When switching to another machine with a KVM switch and back, the mouse is out of control, with X.Org. To recover,
I have to unplug the mouse cable and plug it back.

Steps to reproduce: Have a wheel mouse connected and X.Org. Keyboard, Mouse and Video are connected to a KVM switch. Switch to another machine and back. You have lost the usage of wheel on mouse.

Quoted 5 lines
Quoted 3 lines

This patch for 2.6.23 tries to reconnect the mouse after KVM switch. It doesn't completely solve the problem. Mouse still got a few random bytes after KVM switch.

Have you tried psmouse.resync_time=5 option?

My psmouse is kernel builtin. I tried "psmouse.proto=imps" and it worked. But I don't want to change kernel boot option for each kernel on each machine behind KVM.

Quoted 6 lines

Any change you coudl do

echo 1 > /sys/module/i8042/parameters/debug

before switrching KVM back and forth and send me dmesg?

I will try it when I get home.

Quoted 7 lines
Quoted 7 lines

But it recovers with kernel message:

psmouse.c: Wheel Mouse at isa0060/serio1/input0 lost synchronization, issuing reconnect request.

instead of

Quoted 9 lines
Quoted 4 lines

psmouse.c: Wheel Mouse at isa0060/serio1/input0 lost synchronization, throwing 3 bytes away.

and never recovering from it.

I am hesitant queuing reconnect immediately - if the byte was delayed because embedded controller was busy doing something else and we start querying mouse at the wrong time we might lose mouse altogether.

As it stands now, my Microsoft wheel mouse isn't usable at all after KVM switch without my patch. I had to reset mouse cable to get it back.

H.J.