Skip to contentSkip to conversation

MMC/SD: Write operation in invalid states by borken cards.

PATCH Roopesh 2 participants 3 messages Nov 8, 2007 – Nov 23, 2007

lore
Share & tools
lore

Roopesh

author
#0 lore raw

Hi,

If a write operation fails, shouldnt we still check for the card state to be 'ready to accept next data'?

This question is because I have noticed that some (broken) cards fail the write command, and the immediately issued subsequent commands also fail since the card state was never checked before sending these commands.
(There was a discussion about these cards at the thread: "MMC:
CRC Errors with 2GB cards)

mmc/card/block.c +7 -3
diff -a -u -p -r1.2 block.c
@@ -206,6 +206,7 @@ static int mmc_blk_issue_rq(struct mmc_q
 	struct mmc_card *card = md->queue.card;
 	struct mmc_blk_request brq;
 	int ret = 1, sg_pos, data_size;
+	int data_error = 0;
 
 	mmc_claim_host(card->host);
 
@@ -282,19 +283,19 @@ static int mmc_blk_issue_rq(struct mmc_q
 		if (brq.cmd.error) {
 			printk(KERN_ERR "%s: error %d sending read/write command\n",
 			       req->rq_disk->disk_name, brq.cmd.error);
-			goto cmd_err;
+			data_error = 1;
 		}
 
 		if (brq.data.error) {
 			printk(KERN_ERR "%s: error %d transferring data\n",
 			       req->rq_disk->disk_name, brq.data.error);
-			goto cmd_err;
+			data_error = 1;
 		}
 
 		if (brq.stop.error) {
 			printk(KERN_ERR "%s: error %d sending stop command\n",
 			       req->rq_disk->disk_name, brq.stop.error);
-			goto cmd_err;
+			data_error = 1;
 		}
 
 		if (rq_data_dir(req) != READ) {
@@ -320,6 +321,9 @@ static int mmc_blk_issue_rq(struct mmc_q
 				goto cmd_err;
 #endif
 		}
+
+		if (data_error == 1)
+			goto cmd_err;
 
 		/*
 		 * A block was successfully transferred.

Thanks,
Roopesh.

#1 lore raw
Quoted 5 lines · On Thu, 8 Nov 2007 03:24:10 -0500 Roopesh <[email protected]> wrote:

Hi,

If a write operation fails, shouldnt we still check for the card state to be 'ready to accept next data'?

Quoted 7 lines

This question is because I have noticed that some (broken) cards fail the write command, and the immediately issued subsequent commands also fail since the card state was never checked before sending these commands.
(There was a discussion about these cards at the thread: "MMC:
CRC Errors with 2GB cards)

I'm confused. Didn't the previous fix solve your problems?

Rgds

Signature · 5 lines
     -- Pierre Ossman

  Linux kernel, MMC maintainer        http://www.kernel.org
  PulseAudio, core developer          http://pulseaudio.org
  rdesktop, core developer          http://www.rdesktop.org
author
#2 lore raw

:---------- Original Message ----------
:

:From:  Pierre Ossman [[email protected]]
:To  :  To Roopesh
:Sub :  Re: MMC/SD: Write operation in invalid states by borken cards.
:Sent:  Sat, Nov 10, 2007 at 05:51:19AM EST

: On Thu, 8 Nov 2007 03:24:10 -0500
: Roopesh <[email protected]> wrote:
:

:     >  Hi, 
:     > 
:     >  If a write operation fails, shouldnt we still check for the card 
:     >  state to be 'ready to accept next data'?
:     > 
:     >  This question is because I have noticed that some (broken) cards 
:     >  fail the write command, and the immediately issued subsequent 
:     >  commands also fail since the card state was never checked before 
:     >  sending these commands.
:     >  (There was a discussion about these cards at the thread: "MMC: 
:     >  CRC Errors with 2GB cards)
:     > 

:
: I'm confused. Didn't the previous fix solve your problems?

I am sorry I couldnt respond in time, and also for creating the confusion. The previous fix did solve my problem. However, if for some other reason the card goes into an invalid state and a write command fails, shouldnt we still check for the card state before sending the next IO command?

: Rgds
: --
: -- Pierre Ossman
:

:       Linux kernel, MMC maintainer        http://www.kernel.org
:       PulseAudio, core developer          http://pulseaudio.org
:       rdesktop, core developer          http://www.rdesktop.org