remove references to net-modules.txt

index b9d5b72..72f38b1 100644
@@ -14,8 +14,7 @@ If no base address is given at boot time, the driver will autoprobe
 ports 0x300, 0x280 and 0x310 (in that order).  If no IRQ is given, the driver
 will try to probe for it.
 
-The driver can be used as a loadable module.  See net-modules.txt for details
-of the parameters it can take.  
+The driver can be used as a loadable module.
 
 Theoretically, one instance of the driver can now run multiple cards,
 in the standard way (when loading a module, say "modprobe 3c505

565 lines not on this page · raw message

index 4030274..3b2f7f1 100644
@@ -19,8 +19,7 @@ menuconfig ARCNET
 	  from <http://www.tldp.org/docs.html#howto>(even though ARCnet
 	  is not really Ethernet).
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>.  The module will
+	  To compile this driver as a module, choose M here. The module will
 	  be called arcnet.
 
 if ARCNET

@@ -81,8 +80,7 @@ config ARCNET_COM90xx
 	  have always used the old ARCnet driver without knowing what type of
 	  card you had, this is probably the one for you.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>.  The module will
+	  To compile this driver as a module, choose M here. The module will
 	  be called com90xx.
 
 config ARCNET_COM90xxIO

@@ -93,8 +91,7 @@ config ARCNET_COM90xxIO
 	  the normal driver. Only use it if your card doesn't support shared
 	  memory.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>.  The module will
+	  To compile this driver as a module, choose M here. The module will
 	  be called com90io.
 
 config ARCNET_RIM_I

@@ -105,8 +102,7 @@ config ARCNET_RIM_I
 	  driver is completely untested, so if you have one of these cards,
 	  please mail <[email protected]>, especially if it works!
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>.  The module will
+	  To compile this driver as a module, choose M here. The module will
 	  be called arc-rimi.
 
 config ARCNET_COM20020

@@ -116,8 +112,7 @@ config ARCNET_COM20020
 	  things as promiscuous mode, so packet sniffing is possible, and
 	  extra diagnostic information.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>.  The module will
+	  To compile this driver as a module, choose M here. The module will
 	  be called com20020.
 
 config ARCNET_COM20020_ISA

index 49d7a29..20ac150 100644
@@ -24,8 +24,7 @@ config DE2104X
 	  will say Y here.) Do read the Ethernet-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>.  The module will
+	  To compile this driver as a module, choose M here. The module will
 	  be called de2104x.
 
 config TULIP

@@ -42,8 +41,7 @@ config TULIP
 	  will say Y here.) Do read the Ethernet-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>.  The module will
+	  To compile this driver as a module, choose M here. The module will
 	  be called tulip.
 
 config TULIP_MWI

@@ -104,8 +102,7 @@ config DE4X5
 	  information is contained in
 	  <file:Documentation/networking/de4x5.txt>.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>.  The module will
+	  To compile this driver as a module, choose M here. The module will
 	  be called de4x5.
 
 config WINBOND_840

@@ -129,8 +126,7 @@ config DM9102
 	  (Ethernet) card, say Y.  Some information is contained in the file
 	  <file:Documentation/networking/dmfe.txt>.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>.  The module will
+	  To compile this driver as a module, choose M here. The module will
 	  be called dmfe.
 
 config ULI526X

@@ -141,8 +137,7 @@ config ULI526X
 	  This driver is for ULi M5261/M5263 10/100M Ethernet Controller
 	  (<http://www.uli.com.tw/>).
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>.  The module will
+	  To compile this driver as a module, choose M here. The module will
 	  be called uli526x.
 	  
 config PCMCIA_XIRCOM

@@ -154,8 +149,7 @@ config PCMCIA_XIRCOM
 	  as with work-alike chips from Lite-On (PNIC) and Macronix (MXIC) and
 	  ASIX.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>.  The module will
+	  To compile this driver as a module, choose M here. The module will
 	  be called xircom_cb.  If unsure, say N.
 
 config PCMCIA_XIRTULIP

@@ -168,8 +162,7 @@ config PCMCIA_XIRTULIP
 	  as with work-alike chips from Lite-On (PNIC) and Macronix (MXIC) and
 	  ASIX.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>.  The module will
+	  To compile this driver as a module, choose M here. The module will
 	  be called xircom_tulip_cb.  If unsure, say N.
 
 endif # NET_TULIP