ibm_newemac: Add ET1011c PHY support
PATCH 1/1 ibm_newemac: Add ET1011c PHY support
This adds support for the Agere ET1011c PHY as found on the AMCC Taishan board.
Signed-off-by Stefan Roese <[email protected]>
--- drivers/net/ibm_newemac/phy.c | 33 +++++++++++++++++++++++++++++++++ 1 files changed, 33 insertions(+), 0 deletions(-)
drivers/net/ibm_newemac/phy.c +33 -0
@@ -314,6 +314,38 @@ static struct mii_phy_def bcm5248_phy_def = { .ops = &generic_phy_ops }; +static int et1011c_init (struct mii_phy *phy) +{ +u16 reg_short; + + reg_short = (u16)(phy_read (phy,0x16 )); + reg_short &= ~(0x7 ); + reg_short |=0x6 ;/* RGMII Trace Delay*/ +phy_write (phy,0x16 , reg_short); + + reg_short = (u16)(phy_read (phy,0x17 )); + reg_short &= ~(0x40 ); +phy_write (phy,0x17 , reg_short); + +phy_write (phy,0x1c ,0x74f0 ); +return 0 ; +} + +static struct mii_phy_ops et1011c_phy_ops = { + .init = et1011c_init, + .setup_aneg = genmii_setup_aneg, + .setup_forced = genmii_setup_forced, + .poll_link = genmii_poll_link, + .read_link = genmii_read_link +}; + +static struct mii_phy_def et1011c_phy_def = { + .phy_id =0x0282f000 , + .phy_id_mask =0x0fffff00 , + .name ="ET1011C Gigabit Ethernet" , + .ops = &et1011c_phy_ops +}; +static int m88e1111_init (struct mii_phy *phy) {printk ("%s: Marvell 88E1111 Ethernet\n" , __FUNCTION__);
@@ -344,6 +376,7 @@ static struct mii_phy_def m88e1111_phy_def = { };static struct mii_phy_def *mii_phy_table[] = { + &et1011c_phy_def, &cis8201_phy_def, &bcm5248_phy_def, &m88e1111_phy_def,
Signature · 1 line
1.5.3.5.561.g140d