Skip to contentSkip to conversation

help linux for linux2.6

DISCUSSION vincent.liu 2 participants 2 messages Nov 9, 2007 1 message not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

#1 lore raw

Hi
These days I am working on a MPC8270 based board with linux 2.6.10 kernel. When I use the default kernel and load the uImage to the target board. The kernel hangs after uncompressing kernel image ... ok .
I am freshman in the embedded linux area,So I do not know how to go on this project.

Quoted 1 line

From internet , I searched many articles,and no gain.

Please help me .
Thanks a lot.

--------------
vincent.liu
2007-11-09

#2 lore raw
Quoted 3 lines · vincent.liu

These days I am working on a MPC8270 based board with linux 2.6.10 kernel. When I use the default kernel and load the uImage to the target board. The kernel hangs after uncompressing kernel image ... ok .

The "default kernel" for what board?

Quoted 2 lines

I am freshman in the embedded linux area,So I do not know how to go on this project. From internet , I searched many articles,and no gain.

I suggest trying head-of-tree (with arch/powerpc, not arch/ppc) rather than very old kernels, and making sure that the kernel you're building actually supports your hardware.

-Scott